Lars-Peter Clausen [Sat, 7 Dec 2013 10:45:00 +0000 (10:45 +0000)]
iio:cm36651: Convert to new event config interface
Switch the cm36651 driver to the new IIO event config interface as the old one
is going to be removed.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Beomho Seo <beomho.seo@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Alexandre Belloni [Fri, 6 Dec 2013 19:31:00 +0000 (19:31 +0000)]
iio: mxs-lradc: compute temperature from channel 8 and 9
The mxs LRADC is able to read an internal die temperature sensor. The
temperature has to be calculated from the value read on channel 8 and channel 9.
To be able to expose the result to hwmon, implement iio channel 8 as
(channel 9 - channel 8). Then, implement IIO_CHAN_INFO_SCALE and
IIO_CHAN_INFO_OFFSET so that it can be processed by hwmon through the in kernel
provider/consumer mechanism.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Srinivas Pandruvada [Wed, 6 Nov 2013 00:11:00 +0000 (00:11 +0000)]
iio: hid-sensors: Added Inclinometer 3D
Added usage id processing for Inclinometer 3D. This uses IIO
interfaces for triggered buffer to present data to user
mode.This uses HID sensor framework for registering callback
events from the sensor hub.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Harald Geyer [Sun, 1 Dec 2013 15:04:00 +0000 (15:04 +0000)]
iio: Add new driver dht11
This driver handles DHT11 and DHT22 sensors.
Signed-off-by: Harald Geyer <harald@ccbib.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Harald Geyer [Sun, 1 Dec 2013 15:08:00 +0000 (15:08 +0000)]
iio: Add support for humidity sensors
There are already humidity sensors in the hwmon subsystem,
so we use their unit (milli percent) here as well.
Signed-off-by: Harald Geyer <harald@ccbib.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Mon, 25 Nov 2013 12:42:00 +0000 (12:42 +0000)]
staging:iio:ad9834: Mark transfer buffers as __b16
Fixes the following warnings from sparse:
drivers/staging/iio/frequency/ad9834.c:45:26: warning: incorrect type in assignment (different base types)
drivers/staging/iio/frequency/ad9834.c:45:26: expected unsigned short [unsigned] [short] <noident>
drivers/staging/iio/frequency/ad9834.c:45:26: got restricted __be16 [usertype] <noident>
drivers/staging/iio/frequency/ad9834.c:47:26: warning: incorrect type in assignment (different base types)
drivers/staging/iio/frequency/ad9834.c:47:26: expected unsigned short [unsigned] [short] <noident>
drivers/staging/iio/frequency/ad9834.c:47:26: got restricted __be16 [usertype] <noident>
drivers/staging/iio/frequency/ad9834.c:59:18: warning: incorrect type in assignment (different base types)
drivers/staging/iio/frequency/ad9834.c:59:18: expected unsigned short [unsigned] data
drivers/staging/iio/frequency/ad9834.c:59:18: got restricted __be16 [usertype] <noident>
drivers/staging/iio/frequency/ad9834.c:100:26: warning: incorrect type in assignment (different base types)
drivers/staging/iio/frequency/ad9834.c:100:26: expected unsigned short [unsigned] data
drivers/staging/iio/frequency/ad9834.c:100:26: got restricted __be16 [usertype] <noident>
drivers/staging/iio/frequency/ad9834.c:108:26: warning: incorrect type in assignment (different base types)
drivers/staging/iio/frequency/ad9834.c:108:26: expected unsigned short [unsigned] data
drivers/staging/iio/frequency/ad9834.c:108:26: got restricted __be16 [usertype] <noident>
drivers/staging/iio/frequency/ad9834.c:122:26: warning: incorrect type in assignment (different base types)
drivers/staging/iio/frequency/ad9834.c:122:26: expected unsigned short [unsigned] data
drivers/staging/iio/frequency/ad9834.c:122:26: got restricted __be16 [usertype] <noident>
drivers/staging/iio/frequency/ad9834.c:131:26: warning: incorrect type in assignment (different base types)
drivers/staging/iio/frequency/ad9834.c:131:26: expected unsigned short [unsigned] data
drivers/staging/iio/frequency/ad9834.c:131:26: got restricted __be16 [usertype] <noident>
drivers/staging/iio/frequency/ad9834.c:194:26: warning: incorrect type in assignment (different base types)
drivers/staging/iio/frequency/ad9834.c:194:26: expected unsigned short [unsigned] data
drivers/staging/iio/frequency/ad9834.c:194:26: got restricted __be16 [usertype] <noident>
drivers/staging/iio/frequency/ad9834.c:387:18: warning: incorrect type in assignment (different base types)
drivers/staging/iio/frequency/ad9834.c:387:18: expected unsigned short [unsigned] data
drivers/staging/iio/frequency/ad9834.c:387:18: got restricted __be16 [usertype] <noident>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Mon, 25 Nov 2013 12:42:00 +0000 (12:42 +0000)]
staging:iio:ad9832: Mark transfer buffers as __be16
Fixes the following warnings from sparse:
drivers/staging/iio/frequency/ad9832.c:43:26: warning: incorrect type in assignment (different base types)
drivers/staging/iio/frequency/ad9832.c:43:26: expected unsigned short [unsigned] [short] <noident>
drivers/staging/iio/frequency/ad9832.c:43:26: got restricted __be16 [usertype] <noident>
drivers/staging/iio/frequency/ad9832.c:46:26: warning: incorrect type in assignment (different base types)
drivers/staging/iio/frequency/ad9832.c:46:26: expected unsigned short [unsigned] [short] <noident>
drivers/staging/iio/frequency/ad9832.c:46:26: got restricted __be16 [usertype] <noident>
drivers/staging/iio/frequency/ad9832.c:49:26: warning: incorrect type in assignment (different base types)
drivers/staging/iio/frequency/ad9832.c:49:26: expected unsigned short [unsigned] [short] <noident>
drivers/staging/iio/frequency/ad9832.c:49:26: got restricted __be16 [usertype] <noident>
drivers/staging/iio/frequency/ad9832.c:52:26: warning: incorrect type in assignment (different base types)
drivers/staging/iio/frequency/ad9832.c:52:26: expected unsigned short [unsigned] [short] <noident>
drivers/staging/iio/frequency/ad9832.c:52:26: got restricted __be16 [usertype] <noident>
drivers/staging/iio/frequency/ad9832.c:65:27: warning: incorrect type in assignment (different base types)
drivers/staging/iio/frequency/ad9832.c:65:27: expected unsigned short [unsigned] [short] <noident>
drivers/staging/iio/frequency/ad9832.c:65:27: got restricted __be16 [usertype] <noident>
drivers/staging/iio/frequency/ad9832.c:68:27: warning: incorrect type in assignment (different base types)
drivers/staging/iio/frequency/ad9832.c:68:27: expected unsigned short [unsigned] [short] <noident>
drivers/staging/iio/frequency/ad9832.c:68:27: got restricted __be16 [usertype] <noident>
drivers/staging/iio/frequency/ad9832.c:107:26: warning: incorrect type in assignment (different base types)
drivers/staging/iio/frequency/ad9832.c:107:26: expected unsigned short [unsigned] data
drivers/staging/iio/frequency/ad9832.c:107:26: got restricted __be16 [usertype] <noident>
drivers/staging/iio/frequency/ad9832.c:120:26: warning: incorrect type in assignment (different base types)
drivers/staging/iio/frequency/ad9832.c:120:26: expected unsigned short [unsigned] data
drivers/staging/iio/frequency/ad9832.c:120:26: got restricted __be16 [usertype] <noident>
drivers/staging/iio/frequency/ad9832.c:133:26: warning: incorrect type in assignment (different base types)
drivers/staging/iio/frequency/ad9832.c:133:26: expected unsigned short [unsigned] data
drivers/staging/iio/frequency/ad9832.c:133:26: got restricted __be16 [usertype] <noident>
drivers/staging/iio/frequency/ad9832.c:144:26: warning: incorrect type in assignment (different base types)
drivers/staging/iio/frequency/ad9832.c:144:26: expected unsigned short [unsigned] data
drivers/staging/iio/frequency/ad9832.c:144:26: got restricted __be16 [usertype] <noident>
drivers/staging/iio/frequency/ad9832.c:277:18: warning: incorrect type in assignment (different base types)
drivers/staging/iio/frequency/ad9832.c:277:18: expected unsigned short [unsigned] data
drivers/staging/iio/frequency/ad9832.c:277:18: got restricted __be16 [usertype] <noident>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Axel Lin [Mon, 2 Dec 2013 02:57:00 +0000 (02:57 +0000)]
iio:trigger: Convert to use ATTRIBUTE_GROUPS
Use new ATTRIBUTE_GROUPS macro to declare attribute groups.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Mon, 25 Nov 2013 14:56:00 +0000 (14:56 +0000)]
iio: Add support for blocking IO on buffers
Currently the IIO buffer interface only allows non-blocking reads. This patch
adds support for blocking IO. In blocking mode the thread will go to sleep if no
data is available and will wait for the buffer implementation to signal that new
data is available by waking up the buffers waitqueue.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Mon, 25 Nov 2013 14:56:00 +0000 (14:56 +0000)]
iio: kfifo_buf: Implement data_available() callback
This patch implements the data_available() callback for the kfifo buffer instead
of using the stufftoread flag. The kfifo used by the buffer already knows
whether it is empty or not based on the position of its read and write pointer.
Using this makes it a lot easier to tell whether data is available or not and it
is not necessary to take special measures to ensure that no race conditions
between reading and writing from the buffer occur.
Note, that we still have to take the buffers lock to protect against concurrent
resizeing of the kfifo.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Mon, 25 Nov 2013 14:56:00 +0000 (14:56 +0000)]
iio: Add data_available callback for buffers
This patch adds a new data_available() callback to the iio_buffer_access_funcs
struct. The callback is used to indicate whether data is available in the buffer
for reading. It is meant to replace the stufftoread flag from the iio_buffer
struct. The reasoning for this is that the buffer implementation usually can
determine whether data is available rather easily based on its state, on the
other hand it can be rather tricky to update the stufftoread flag in a race free
way.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Mon, 25 Nov 2013 12:42:00 +0000 (12:42 +0000)]
staging:iio:ad7746: Do not store the transfer buffer on the stack
Some I2C controllers might not be able to handle transfer buffers that are
stored on stack.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Mon, 25 Nov 2013 12:42:00 +0000 (12:42 +0000)]
staging:iio:ad7746: Mark transfer buffer as __be32
Fixes the following warnings from sparse:
drivers/staging/iio/cdc/ad7746.c:599:25: warning: cast to restricted __be32
drivers/staging/iio/cdc/ad7746.c:599:25: warning: cast to restricted __be32
drivers/staging/iio/cdc/ad7746.c:599:25: warning: cast to restricted __be32
drivers/staging/iio/cdc/ad7746.c:599:25: warning: cast to restricted __be32
drivers/staging/iio/cdc/ad7746.c:599:25: warning: cast to restricted __be32
drivers/staging/iio/cdc/ad7746.c:599:25: warning: cast to restricted __be32
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Mon, 25 Nov 2013 12:42:00 +0000 (12:42 +0000)]
staging:iio:
ad7280a: Do not store transfer buffer on the stack
Some I2C controllers may not be able to handle transfer buffers that are placed
on the stack.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Mon, 25 Nov 2013 12:42:00 +0000 (12:42 +0000)]
staging:iio:
ad7280a: Mark transfer buffer as __be32
Fixes the following warnings from sparse:
drivers/staging/iio/adc/
ad7280a.c:194:35: warning: incorrect type in initializer (different base types)
drivers/staging/iio/adc/
ad7280a.c:194:35: expected unsigned int [unsigned] tx_buf
drivers/staging/iio/adc/
ad7280a.c:194:35: got restricted __be32 [usertype] <noident>
drivers/staging/iio/adc/
ad7280a.c:207:16: warning: cast to restricted __be32
drivers/staging/iio/adc/
ad7280a.c:207:16: warning: cast to restricted __be32
drivers/staging/iio/adc/
ad7280a.c:207:16: warning: cast to restricted __be32
drivers/staging/iio/adc/
ad7280a.c:207:16: warning: cast to restricted __be32
drivers/staging/iio/adc/
ad7280a.c:207:16: warning: cast to restricted __be32
drivers/staging/iio/adc/
ad7280a.c:207:16: warning: cast to restricted __be32
drivers/staging/iio/adc/
ad7280a.c:219:13: warning: incorrect type in assignment (different base types)
drivers/staging/iio/adc/
ad7280a.c:219:13: expected unsigned int [unsigned] [assigned] reg
drivers/staging/iio/adc/
ad7280a.c:219:13: got restricted __be32 [usertype] <noident>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Mon, 25 Nov 2013 12:42:00 +0000 (12:42 +0000)]
iio:vcnl4000: Mark transfer buffer as __be16
Fixes the following warnings from sparse:
drivers/iio/light/vcnl4000.c:88:16: warning: cast to restricted __be16
drivers/iio/light/vcnl4000.c:88:16: warning: cast to restricted __be16
drivers/iio/light/vcnl4000.c:88:16: warning: cast to restricted __be16
drivers/iio/light/vcnl4000.c:88:16: warning: cast to restricted __be16
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Mon, 25 Nov 2013 12:42:00 +0000 (12:42 +0000)]
iio:ad7266: Mark transfer buffer as __be16
Fixes the following warnings from sparse:
drivers/iio/adc/ad7266.c:140:16: warning: cast to restricted __be16
drivers/iio/adc/ad7266.c:140:16: warning: cast to restricted __be16
drivers/iio/adc/ad7266.c:140:16: warning: cast to restricted __be16
drivers/iio/adc/ad7266.c:140:16: warning: cast to restricted __be16
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Mon, 25 Nov 2013 12:41:00 +0000 (12:41 +0000)]
iio:ad5791: Do not store transfer buffers on the stack
Some SPI controllers may not be able to handle transfer buffers that are placed
on the stack.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Mon, 25 Nov 2013 12:41:00 +0000 (12:41 +0000)]
iio:ad5791: Mark transfer buffers as __be32
Fixes the following warnings from sparse:
drivers/iio/dac/ad5791.c:114:18: warning: incorrect type in assignment (different base types)
drivers/iio/dac/ad5791.c:114:18: expected unsigned int [unsigned] [usertype] d32
drivers/iio/dac/ad5791.c:114:18: got restricted __be32 [usertype] <noident>
drivers/iio/dac/ad5791.c:142:21: warning: incorrect type in assignment (different base types)
drivers/iio/dac/ad5791.c:142:21: expected unsigned int [unsigned] [usertype] d32
drivers/iio/dac/ad5791.c:142:21: got restricted __be32 [usertype] <noident>
drivers/iio/dac/ad5791.c:144:21: warning: incorrect type in assignment (different base types)
drivers/iio/dac/ad5791.c:144:21: expected unsigned int [unsigned] [usertype] d32
drivers/iio/dac/ad5791.c:144:21: got restricted __be32 [usertype] <noident>
drivers/iio/dac/ad5791.c:148:16: warning: cast to restricted __be32
drivers/iio/dac/ad5791.c:148:16: warning: cast to restricted __be32
drivers/iio/dac/ad5791.c:148:16: warning: cast to restricted __be32
drivers/iio/dac/ad5791.c:148:16: warning: cast to restricted __be32
drivers/iio/dac/ad5791.c:148:16: warning: cast to restricted __be32
drivers/iio/dac/ad5791.c:148:16: warning: cast to restricted __be32
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Mon, 25 Nov 2013 12:41:00 +0000 (12:41 +0000)]
iio:ad5755: Mark transfer buffer as __be32
Fixes the following warnings from sparse:
drivers/iio/dac/ad5755.c:117:25: warning: incorrect type in assignment (different base types)
drivers/iio/dac/ad5755.c:117:25: expected unsigned int [unsigned] [usertype] d32
drivers/iio/dac/ad5755.c:117:25: got restricted __be32 [usertype] <noident>
drivers/iio/dac/ad5755.c:171:25: warning: incorrect type in assignment (different base types)
drivers/iio/dac/ad5755.c:171:25: expected unsigned int [unsigned] [usertype] d32
drivers/iio/dac/ad5755.c:171:25: got restricted __be32 [usertype] <noident>
drivers/iio/dac/ad5755.c:172:25: warning: incorrect type in assignment (different base types)
drivers/iio/dac/ad5755.c:172:25: expected unsigned int [unsigned] [usertype] d32
drivers/iio/dac/ad5755.c:172:25: got restricted __be32 [usertype] <noident>
drivers/iio/dac/ad5755.c:176:23: warning: cast to restricted __be32
drivers/iio/dac/ad5755.c:176:23: warning: cast to restricted __be32
drivers/iio/dac/ad5755.c:176:23: warning: cast to restricted __be32
drivers/iio/dac/ad5755.c:176:23: warning: cast to restricted __be32
drivers/iio/dac/ad5755.c:176:23: warning: cast to restricted __be32
drivers/iio/dac/ad5755.c:176:23: warning: cast to restricted __be32
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Mon, 25 Nov 2013 12:41:00 +0000 (12:41 +0000)]
iio:ad5686: Mark transfer buffer as __be32
Fixes the following warnings from sparse:
drivers/iio/dac/ad5686.c:100:25: warning: incorrect type in assignment (different base types)
drivers/iio/dac/ad5686.c:100:25: expected unsigned int [unsigned] [usertype] d32
drivers/iio/dac/ad5686.c:100:25: got restricted __be32 [usertype] <noident>
drivers/iio/dac/ad5686.c:122:25: warning: incorrect type in assignment (different base types)
drivers/iio/dac/ad5686.c:122:25: expected unsigned int [unsigned] [usertype] d32
drivers/iio/dac/ad5686.c:122:25: got restricted __be32 [usertype] <noident>
drivers/iio/dac/ad5686.c:124:25: warning: incorrect type in assignment (different base types)
drivers/iio/dac/ad5686.c:124:25: expected unsigned int [unsigned] [usertype] d32
drivers/iio/dac/ad5686.c:124:25: got restricted __be32 [usertype] <noident>
drivers/iio/dac/ad5686.c:130:16: warning: cast to restricted __be32
drivers/iio/dac/ad5686.c:130:16: warning: cast to restricted __be32
drivers/iio/dac/ad5686.c:130:16: warning: cast to restricted __be32
drivers/iio/dac/ad5686.c:130:16: warning: cast to restricted __be32
drivers/iio/dac/ad5686.c:130:16: warning: cast to restricted __be32
drivers/iio/dac/ad5686.c:130:16: warning: cast to restricted __be32
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Mon, 25 Nov 2013 12:41:00 +0000 (12:41 +0000)]
iio:ad5421: Mark transfer buffer as __be32
Fixes the following warnings from sparse:
drivers/iio/dac/ad5421.c:134:25: warning: incorrect type in assignment (different base types)
drivers/iio/dac/ad5421.c:134:25: expected unsigned int [unsigned] [usertype] d32
drivers/iio/dac/ad5421.c:134:25: got restricted __be32 [usertype] <noident>
drivers/iio/dac/ad5421.c:168:25: warning: incorrect type in assignment (different base types)
drivers/iio/dac/ad5421.c:168:25: expected unsigned int [unsigned] [usertype] d32
drivers/iio/dac/ad5421.c:168:25: got restricted __be32 [usertype] <noident>
drivers/iio/dac/ad5421.c:172:23: warning: cast to restricted __be32
drivers/iio/dac/ad5421.c:172:23: warning: cast to restricted __be32
drivers/iio/dac/ad5421.c:172:23: warning: cast to restricted __be32
drivers/iio/dac/ad5421.c:172:23: warning: cast to restricted __be32
drivers/iio/dac/ad5421.c:172:23: warning: cast to restricted __be32
drivers/iio/dac/ad5421.c:172:23: warning: cast to restricted __be32
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Mon, 25 Nov 2013 12:41:00 +0000 (12:41 +0000)]
iio:ad5504: Do not store transfer buffers on the stack
Some SPI controllers may not be able to handle transfer buffers that are placed
on the stack.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Mon, 25 Nov 2013 12:41:00 +0000 (12:41 +0000)]
iio:ad5504: Mark transfer buffers as __be16
Fixes the following warnings from sparse:
drivers/iio/dac/ad5504.c:71:19: warning: incorrect type in initializer (different base types)
drivers/iio/dac/ad5504.c:71:19: expected unsigned short [unsigned] [usertype] tmp
drivers/iio/dac/ad5504.c:71:19: got restricted __be16 [usertype] <noident>
drivers/iio/dac/ad5504.c:80:19: warning: incorrect type in initializer (different base types)
drivers/iio/dac/ad5504.c:80:19: expected unsigned short [unsigned] [usertype] tmp
drivers/iio/dac/ad5504.c:80:19: got restricted __be16 [usertype] <noident>
drivers/iio/dac/ad5504.c:93:16: warning: cast to restricted __be16
drivers/iio/dac/ad5504.c:93:16: warning: cast to restricted __be16
drivers/iio/dac/ad5504.c:93:16: warning: cast to restricted __be16
drivers/iio/dac/ad5504.c:93:16: warning: cast to restricted __be16
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Jingoo Han [Mon, 2 Dec 2013 23:29:48 +0000 (08:29 +0900)]
vme: remove DEFINE_PCI_DEVICE_TABLE macro
Don't use DEFINE_PCI_DEVICE_TABLE macro, because this macro
is not preferred.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martyn Welch [Fri, 8 Nov 2013 11:58:35 +0000 (11:58 +0000)]
VME: Rename vme_slot_get to avoid confusion with reference counting
Traditionally the "get" functions increment the reference count of the
object that is returned, which does not happen with vme_slot_get. The
function vme_slot_get returns the physical VME slot associated with a
particular struct vme_dev. Rename vme_slot_num to avoid any confusion.
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martyn Welch [Fri, 8 Nov 2013 11:58:34 +0000 (11:58 +0000)]
VME: Provide access to VME bus enumeration and fix vme_user match function
The match function for vme_user is completely wrong. It will blindly bind
against the first VME slot on each bus (at this point that would be just the
first bus as the driver can only handle one bus).
The original intention (before some major subsystem changes) was that the
driver bind against the slot to which the bridge was attached in the VME
system and to the bus(es) provided via the "bus" module parameter.
To do this cleanly (i.e. without poking arround in the subsystems internal
stuctures) a functionality has been added to provide access to the bus
enumeration.
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wei Yongjun [Thu, 28 Nov 2013 02:27:59 +0000 (10:27 +0800)]
staging: dwc2: fix sparse non static symbol warning
Fixes the following sparse warning:
drivers/staging/dwc2/core.c:2672:6: warning:
symbol 'dwc2_set_param_uframe_sched' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:42:31 +0000 (16:42 -0700)]
staging: comedi: ni_atmio16d: remove an unnecessary printk
This blank line printk is not necessary. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:42:30 +0000 (16:42 -0700)]
staging: comedi: ni_atmio16d: tidy up the irq support in atmio16d_attach()
Tidy up the code that does the request_irq().
Only hookup the commad support if the irq was sucessfully requested.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:42:29 +0000 (16:42 -0700)]
staging: comedi: ni_atmio16d: remove printk() noise in atmio16d_ai_insn_read()
These printk messages are just added noise. Remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:42:28 +0000 (16:42 -0700)]
staging: comedi: ni_pcimio: convert printk() to dev_dbg()
Convert this printk messages to a dev_dbg().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:42:27 +0000 (16:42 -0700)]
staging: comedi: ni_tio: remove commented out printk message
This printk message is just added noise. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:42:26 +0000 (16:42 -0700)]
staging: comedi: pcl812: convert printk messages in pcl812_attach()
Convert the printk messages in this function to dev_{level} mesages.
Remove the ones that are just added noise.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:42:25 +0000 (16:42 -0700)]
staging: comedi: pcl812: tidy up the irq support in pcl812_attach()
Tidy up the code that does the request_irq().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:42:24 +0000 (16:42 -0700)]
staging: comedi: pcl816: convert printk messages in pcl816_attach()
Convert the printk messages in this function to dev_{level} mesages.
Remove the ones that are just added noise.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:42:23 +0000 (16:42 -0700)]
staging: comedi: pcl816: remove commented out printk debug
These messages are just added noise. Remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 27 Nov 2013 18:05:19 +0000 (11:05 -0700)]
staging: comedi: pcl816: tidy up the irq support in pcl816_attach()
Tidy up the code that does the request_irq().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:42:21 +0000 (16:42 -0700)]
staging: comedi: pcl816: remove TRIG_WAKE_EOS support stub
The support code for this command flag is commented out. Just remove
it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:42:20 +0000 (16:42 -0700)]
staging: comedi: pcl816: remove commented out outb() macro
This macro is commented out, thankfully... Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:42:19 +0000 (16:42 -0700)]
staging: comedi: pcl818: convert printk() messages to dev_{level}
Convert the remaining printk messsages in this driver to dev_{level}.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:42:18 +0000 (16:42 -0700)]
staging: comedi: pcl818: tidy up the irq support in pcl818_attach()
Tidy up the code that does the request_irq().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:42:17 +0000 (16:42 -0700)]
staging: comedi: pcl818: remove board attach noise
These messages are just added noise. Remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:42:16 +0000 (16:42 -0700)]
staging: comedi: pcl818: remove printk function trace messages
These messages are just added noise. Remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:42:15 +0000 (16:42 -0700)]
staging: comedi: pcl818: remove commented out printk debug
These messages are just added noise. Remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:42:14 +0000 (16:42 -0700)]
staging: comedi: pcm3724: remove commented out printk debug
These messages are just added noise. Remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:42:13 +0000 (16:42 -0700)]
staging: comedi: plx9080.h: remove unnecessary printk noise
The timeouts will return -ETIMEDOUT. The printks are just added noise.
Remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:42:12 +0000 (16:42 -0700)]
staging: comedi: rtd520: remove commented out printk debug
These messages are just added noise. Remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:42:11 +0000 (16:42 -0700)]
staging: comedi: mpc624: convert printk messages in mpc624_ai_rinsn()
There's no reason for these messages to be KERN_INFO. Convert them to
dev_dbg().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:42:10 +0000 (16:42 -0700)]
staging: comedi: mpc624: remove unnecessary printk noise
The ai read timeout will return -ETIMEDOUT. The printk is just added
noise. Remove it.
It's also not necessary to set data[n[ = 0 when the read timesout.
Remove that also.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:42:09 +0000 (16:42 -0700)]
staging: comedi: mpc624: remove unnecessary test
It's not necessaary to vaidate insn->n passed to the (*insn_read)
function. The for() loop following it will just be a NOP.
Remove the test as well as the printk noise.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:42:08 +0000 (16:42 -0700)]
staging: comedi: mpc624: remove commented out printk
This printk is just added noise. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:42:07 +0000 (16:42 -0700)]
staging: comedi: dt282x: remove commented out printk
This printk is just added noise. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:42:06 +0000 (16:42 -0700)]
staging: comedi: dt282x: convert dt282x_ao_inttrig() messages
Convert the messages in this function to dev_err().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:42:05 +0000 (16:42 -0700)]
staging: comedi: dt282x: convert dt282x_ai_dma_interrupt() messages
Convert the messages in this function to dev_{level}().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:42:04 +0000 (16:42 -0700)]
staging: comedi: dt282x: convert dt282x_ao_dma_interrupt() messages
Convert the messages in this function to dev_err().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:42:03 +0000 (16:42 -0700)]
staging: comedi: dt282x: remove disable code that disables the irq
The code that would disable the irq after getting a number of D/A errors
is disabled. Just remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:42:02 +0000 (16:42 -0700)]
staging: comedi: dt282x: remove unnecessary blank line message
This blank line message is not needed. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:42:01 +0000 (16:42 -0700)]
staging: comedi: dt282x: convert printk() in dt282x_attach to a dev_err()
Convert this printk message into a dev_err().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:42:00 +0000 (16:42 -0700)]
staging: comedi: dt282x: remove attach noise in dt282x_grab_dma()
These messages are just added noise. Remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:41:59 +0000 (16:41 -0700)]
staging: comedi: dt282x: tidy up the irq support in dt282x_attach()
An irq is only needed by this driver in order to support async commands.
Since it is optional, modify the attach so that if the request_irq() fails
the attach does not fail.
Remove the printk noise about the irq.
Only hookup the async command support if the request_irq() was successful.
Also, only call dt282x_grab_dma() if we have an irq since interrupt support
is needed to support dma.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:41:58 +0000 (16:41 -0700)]
staging: comedi: dt2815: convert printk's in dt2815_attach()
These messages don't appear to be important enough to warrent KERN_INFO
and KERN_WARNING levels. Convert them dev_dbg().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:41:57 +0000 (16:41 -0700)]
staging: comedi: dt2815: convert printk's in dt2815_ao_insn()
Convert the printk(KERN_WARNING messages in this function to dev_dbg().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:41:56 +0000 (16:41 -0700)]
staging: comedi: dt2814: tidy up the irq support in dt2814_attach()
An irq is only needed by this driver in order to support async commands.
Since it is optional, modify the attach so that if the request_irq() fails
the attach does not fail.
Remove the printk noise about the irq.
Only hookup the async command support if the request_irq() was successful.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:41:55 +0000 (16:41 -0700)]
staging: comedi: dt2814: convert a printk(KERN_ERR into a dev_err()
Convert this printk message into a dev_dev().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:41:54 +0000 (16:41 -0700)]
staging: comedi: dt2814: remove bad printk noise
This printk could spew a lot of noise while waiting for the ai conversion
to complete. Just remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:41:53 +0000 (16:41 -0700)]
staging: comedi: dt2814: remove unnecessary printk noise
The ai read timeout will return -ETIMEDOUT. The printk is just added
noise. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:41:52 +0000 (16:41 -0700)]
staging: comedi: dt2811: remove disabled interrupt support code
The interrupt support in this driver is incomplete due to the missing
comedi functions to support async commands.
Since the interrupt code is already disable just remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:41:51 +0000 (16:41 -0700)]
staging: comedi: dt2811: remove disabled dt2811_adtrig() function
This function is not used by the driver. It's also suffering from bitrot
since COMEDI_MDEMAND and COMEDI_MCONTS are not defined anywhere. Just
remove the code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:41:50 +0000 (16:41 -0700)]
staging: comedi: dt2801: convert printk() messages to dev_dbg()
Convert all the printk() messages in this driver to dev_dbg().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:41:49 +0000 (16:41 -0700)]
staging: comedi: dt2801: remove commented out printk()
This printk is just added noise. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:41:48 +0000 (16:41 -0700)]
staging: comedi: dt2801: remove disabled code in dt2801_writedata
The code that checks the DT_S_READY status is disabled. Just remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:41:47 +0000 (16:41 -0700)]
staging: comedi: dmm32at: convert a printk(KERN_ERR to a dev->err()
Convert this printk message to a dev_err() message.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:41:46 +0000 (16:41 -0700)]
staging: comedi: dmm32at: tidy up the irq support in dmm32at_attach()
An irq is only needed by this driver in order to support async commands.
Since it is optional, modify the attach so that if the request_irq() fails
the attach does not fail.
Remove the printk noise about the irq.
Only hookup the async command support if the request_irq() was successful.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:41:45 +0000 (16:41 -0700)]
staging: comedi: dmm32at: remove commented out printk debug
These printk messages are just added noise. Remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:41:44 +0000 (16:41 -0700)]
staging: comedi: dmm32at: remove unnecessary printk noise
A timeout will return -ETIMEDOUT. The printks are just added noise.
Remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:41:43 +0000 (16:41 -0700)]
staging: comedi: das16m1: tidy up the irq support in das16m1_attach()
An irq is only needed by this driver in order to support async commands.
Since it is optional, modify the attach so that if an invalid irq is
selected by the user, or the request_irq() fails, the attach does not
fail.
Remove all the printk noise about the irq.
Only hookup the async command support if the request_irq() was successful.
Tidy up das16m1_irq_bits() a bit. This helper returns the value that needs
to be written to the DAS16M1_INTR_CONTROL register to setup the irq routing.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:41:42 +0000 (16:41 -0700)]
staging: comedi: cb_pcimdas: remove unnecessary printk noise
The ai read timeout will return -ETIMEDOUT. The printk is just added
noise. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:41:41 +0000 (16:41 -0700)]
staging: comedi: cb_pcimdas: remove commented out irq init code
This driver does not have interrupt support. Remove the commented out
code that requests the irq.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:41:40 +0000 (16:41 -0700)]
staging: comedi: c6xdigio: remove commented out function trace messages
These commented out messages are just added noise. Remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:41:39 +0000 (16:41 -0700)]
staging: comedi: c6xdigio: remove commented out subdevice code
The code to initialize subdevice[2] is commented out and incomplete.
Just remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:41:38 +0000 (16:41 -0700)]
staging: comedi: adq12b: remove commented out debug message
Remove the commented out message, it would just be added noise.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:41:37 +0000 (16:41 -0700)]
staging: comedi: pcl818: convert some printk's to dev_dbg()
Convert these messages to dev_dbg() and tidy them up a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:41:36 +0000 (16:41 -0700)]
staging: comedi: pcl816: convert some printk's to dev_dbg()
Convert these warning messages to dev_dbg() to minimize the noise.
Also, tidy them up a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:41:35 +0000 (16:41 -0700)]
staging: comedi: pcl812: convert some printk's to dev_dbg()
Convert these debug messages to dev_dbg() and tidy them up a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:41:34 +0000 (16:41 -0700)]
staging: comedi: dmm32at: remove final attach noise and fix return value
The "success" message after an attach is just added noise. Remove it.
The normal return value for "success" is 0.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:41:33 +0000 (16:41 -0700)]
staging: comedi: adv_pci1710: convert some printk's to dev_dbg()
Convert these debug messages to dev_dbg().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 26 Nov 2013 23:41:32 +0000 (16:41 -0700)]
staging: comedi: pcmmio.c: remove kcalloc() failure message
An allocation failure will have already displayed a message.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aldo Iljazi [Mon, 2 Dec 2013 13:22:29 +0000 (15:22 +0200)]
Staging: usbip: vhci_hcd.c: removed a space
Line 921: Removed the space before the semicolon.
Signed-off-by: Aldo Iljazi <mail@aldo.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chen Gang [Wed, 27 Nov 2013 03:40:58 +0000 (11:40 +0800)]
drivers: staging: ft1000: ft1000-usb: ft1000_debug.c: check return value of get_user() in ft1000_ioctl()
get_user() may fail and cause 'msgsz' uninitialized, so need give a
check. The related warning (with allmodconfig under hexagon):
CC [M] drivers/staging/ft1000/ft1000-usb/ft1000_debug.o
drivers/staging/ft1000/ft1000-usb/ft1000_debug.c: In function 'ft1000_ioctl':
include/uapi/linux/swab.h:53:9: warning: 'msgsz' may be used uninitialized in this function [-Wuninitialized]
drivers/staging/ft1000/ft1000-usb/ft1000_debug.c:533:17: note: 'msgsz' was declared here
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michal Nazarewicz [Fri, 29 Nov 2013 17:10:59 +0000 (18:10 +0100)]
staging: lustre: fix potential NULL pointer dereference
The rest of the code seem to imply that rmf_dumper may indeed be
NULL. Change the code so that dumping is not even considered if
rmf_dumper callback is not set.
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michal Nazarewicz [Fri, 29 Nov 2013 17:05:01 +0000 (18:05 +0100)]
staging: silicom: remove dead code
bus_info field of struct ethtool_drvinfo is an array thus it always
evaluates to true in a boolean context. Therefore operation
depending on it being false will never be executed.
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aldo Iljazi [Fri, 29 Nov 2013 12:55:37 +0000 (14:55 +0200)]
Staging: dgnc: dgnc_trace.c: fixed coding style issues
Fixed the following coding style issues:
Lines 66-70: Replaced spaced with tabs.
Lines 75, 98, 182: Inserted space before the open parenthesis.
Line 89: Inserted spaces around that '='
Signed-off-by: Aldo Iljazi <mail@aldo.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wei Yongjun [Wed, 27 Nov 2013 00:38:19 +0000 (08:38 +0800)]
staging: rts5208: fix error return code in rtsx_probe()
Fix to return -ENOMEM instead of 0 when the memory alloc fail
in probe error handling path.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aldo Iljazi [Sat, 30 Nov 2013 17:33:57 +0000 (19:33 +0200)]
Staging: dwc2: hcd.c: Fixed a coding style issue
Fixed a coding style issue, specifically:
Line 1798: Removed parentheses since return is not a function.
Signed-off-by: Aldo Iljazi <mail@aldo.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stephen Warren [Wed, 27 Nov 2013 01:58:01 +0000 (18:58 -0700)]
staging: dwc2: set up all module params
The DWC2 USB controller in the BCM2835 (Raspberry Pi) needs some non-
default parameters. Select these based on the compatible value from the
DT node. For all other HW, fall back to the default parameters currently
in use.
The values in params_bcm2835[] were posted to the mailing list by Paul
quite some time ago. I made a couple of minor modifications since then;
to set ahbcfg instead of ahb_single, and to set uframe_sched.
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peng Tao [Tue, 3 Dec 2013 14:42:05 +0000 (22:42 +0800)]
staging/lustre/llite: fix used uninitialized warning
Got below warning when building with sparc:
drivers/staging/lustre/lustre/llite/file.c: In function 'll_file_aio_write':
drivers/staging/lustre/lustre/llite/file.c:1247:9: warning: 'count' may be used uninitialized in this function [-Wuninitialized]
drivers/staging/lustre/lustre/llite/file.c: In function 'll_file_aio_read':
drivers/staging/lustre/lustre/llite/file.c:1188:9: warning: 'count' may be used uninitialized in this function [-Wuninitialized]
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peng Tao [Tue, 3 Dec 2013 14:42:04 +0000 (22:42 +0800)]
staging/lustre: fix defined not used warning
register_sysctl_table/unregister_sysctl_table are defined
regardless of CONFIG_SYSCTL true or false. so we don't need
to surround them with #ifdef CONFIG_SYSCTL. Besides, current
code got build warnings when CONFIG_SYSCTL is not set:
drivers/staging/lustre/lustre/libcfs/linux/linux-proc.c:368:20: warning:
‘lnet_table’ defined but not used [-Wunused-variable]
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peng Tao [Tue, 3 Dec 2013 14:42:02 +0000 (22:42 +0800)]
staging/lustre/obdclass: move obd_sysctl_init out of class_procfs_init
It is not strictly related to procfs. Besides, we already call obd_sysctl_clean
outside of class_procfs_clean.
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peng Tao [Tue, 3 Dec 2013 14:42:01 +0000 (22:42 +0800)]
staging/lustre/ldlm: inline ldlm_proc_setup
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This page took 0.044138 seconds and 5 git commands to generate.