"unsupported language" error in info types when using Ada.

This implements a rudimentary version of the la_print_typedef method
for Ada.  Ada usually does not use typedefs, but there is one exception:
pointers to unconstrained arrays.  Without this patch, we sometimes
get an error in the "info types" output:

    (gdb) info types new_integer_type
    All types matching regular expression "new_integer_type":

    File foo.adb:
    Language not supported.

For now, we treat the typedef as if it did not exist - using the
underlying type instead.  This is the right thing to do for most cases,
the only exception being access to array types.  Since we already have
a general issue in handling these pointers (we confuse them with fat
pointers), we will enhance ada_print_typedef to handle these pointers
at the same time we address the general issue.

gdb/ChangeLog:

        * ada-typeprint.c (ada_print_typedef): New function.
        * ada-lang.h (ada_print_typedef): Add declaration.
        * ada-lang.c (ada_language_defn): set la_print_typdef field
        to ada_print_typedef.

gdb/testsuite/ChangeLog:

        * info_types.c, info_types.exp: New files.

Tested on x86_64-linux.

Unused function in procfs.c on alpha-tru64.

The procfs_address_to_host_pointer function was not used outside of
alpha-tru64, and thus was triggering a compiler warning.  Adjusted
accordingly.

gdb/ChangeLog:

        * procfs.c (procfs_address_to_host_pointer): Only define when used.

procfs.c: iterate_over_mappings callback has wrong profile.

The function proc_find_memory_regions calls iterate_over_mappings as
follow:

> return iterate_over_mappings (pi, func, data,
>                               find_memory_regions_callback);

The problem is that both func and find_memory_regions_callback
do not match the profile expected by iterate_over_mappings:

> iterate_over_mappings (procinfo *pi, int (*child_func) (), void *data,
>                        int (*func) (struct prmap *map,
>                                     int (*child_func) (),
>                                     void *data))

We cannot change proc_find_memory_regions such that FUNC is a pointer
to a function that takes no argument (in place of the 6 that it has).
This is because proc_find_memory_regions is used as a target_ops method.
However, it turns out that changing iterate_over_mappings to conform
to the profile imposed by the target_ops vector is possible without
much effort.

gdb/ChangeLog:

        * procfs.c (iterate_over_mappings_cb_ftype): New typedef.
        (iterate_over_mappings): Adjust function profile. Add declaration.
        (insert_dbx_link_bpt_in_region, info_mappings_callback):
        Adjust accordingly.

procfs.c: Move solib_mappings_callback up to avoid compiler warning.

There are currently 2 issues with the placement of this routine:
  - It's defined after it is being used (causing an implicit declaration);
  - It looks like it's being defined all the time, whereas it is used
    only on mips-irix (AFAICT) - shouldn't have this triggered a warning
    on sparc-solaris, for instance???

In any case, this patch moves this function up, inside the right region,
just before the function where it is actually used.

gdb/ChangeLog:

        * procfs.c (solib_mappings_callback): Move function up to avoid
        a compiler warning.

procfs.c: Move find_signalled_thread and find_stop_signal.

These two functions are only used from procfs_make_note_section, which
itself is only defined if:

    #if defined (UNIXWARE) || defined (PIOCOPENLWP) || defined (PCAGENT)

So these two functions are unused on mips-irix, and they get flagged
by -Wunused-function. This patch simply moves these functions closer
to the function that uses them, which also has the effect of putting
them inside the same #if block as procfs_make_note_section.  Thus
they are defined only when used.

gdb/ChangeLog:

        * procfs.c (find_signalled_thread, find_stop_signal): Move
        these functions down to define them only when used.

Wrong value printed by info locals for dynamic object.

The problem is printing the wrong value for dynamic local variables
when using the "info locals" command. Consider the following code:

   procedure Print (I1 : Positive; I2 : Positive) is
      type My_String is array (I1 .. I2) of Character;
      I : My_String := (others => 'A');
      S : String (1 .. I2 + 3) := (others => ' ');
   begin
      S (I1 .. I2) := String (I); --  BREAK
      Put_Line (S);
   end Print;

After the debugger stopped at BREAK, we try printing all local variables.
Here is what we get:

        (gdb) info locals
        i = "["00"]["00"]"
        s = "["00"]["00"]["00"]["00"]["00"]["00"]["00"]["00"]"

Curiously, printing their value using the "print" command works:

        (gdb) print i
        $1 = "AA"
        (gdb) print s
        $2 = "        "

We traced the problem to trying to get the contents of a variable
(call to value_contents) before "fix'ing" it.  For those not familiar
with the Ada language support, "fixing" a value consists of swapping
the value's dynamic type with a static version that is appropriate
for our actual value.  As a result, the dynamic type was used to
determine the value size, which is zero, and thus the value contents
was empty.

gdb/ChangeLog:

        * valprint.c (common_val_print): Fix the value before extracting
        its contents.
        * ada-lang.c (ada_to_fixed_value): Make this function extern.
        * ada-lang.h (ada_to_fixed_value): New function declaration.
        * ada-valprint.c (ada_value_print): Use ada_to_fixed_value
        to avoid code duplication and fix a bug in the handling of
        fixed types contents.

gdb/testsuite/ChangeLog:

        * gdb.ada/dyn_loc: New testcase.

bfd:
* elf32-tic6x.h: New.
* elf-bfd.h (enum elf_target_id): Define TIC6X_ELF_DATA.
* elf32-tic6x.c (struct elf32_tic6x_obj_tdata, elf32_tic6x_tdata,
elf32_tic6x_howto_table_rel, elf32_tic6x_info_to_howto_rel,
elf32_tic6x_set_use_rela_p, elf32_tic6x_mkobject,
elf32_tic6x_new_section_hook, elf32_tic6x_rel_relocation_p,
bfd_elf32_mkobject, bfd_elf32_new_section_hook): New.
(elf32_tic6x_reloc_type_lookup, elf32_tic6x_reloc_name_lookup,
elf32_tic6x_relocate_section): Handle REL relocations.
(elf_info_to_howto_rel): Define to elf32_tic6x_info_to_howto_rel.

gas:
* config/tc-tic6x.c (OPTION_MGENERATE_REL): New.
(md_longopts): Add -mgenerate-rel.
(tic6x_generate_rela): New.
(md_parse_option): Handle -mgenerate-rel.
(md_show_usage): Add comment that -mgenerate-rel is undocumented.
(tic6x_init_after_args): New.
(md_apply_fix): Correct shift calculations for SB-relative
relocations.
(md_pcrel_from): Change to tic6x_pcrel_from_section.  Do not
adjust addresses for relocations referencing symbols in other
sections.
(tc_gen_reloc): Adjust addend calculations for REL relocations.
* config/tc-tic6x.h (MD_PCREL_FROM_SECTION,
tic6x_pcrel_from_section, tc_init_after_args,
tic6x_init_after_args): New.

ld/testsuite:
* ld-tic6x/data-reloc-global-rel.d,
ld-tic6x/data-reloc-global-rel.s,
ld-tic6x/data-reloc-local-r-rel.d,
ld-tic6x/data-reloc-local-rel.d, ld-tic6x/mvk-reloc-global-rel.d,
ld-tic6x/mvk-reloc-global-rel.s, ld-tic6x/mvk-reloc-local-1-rel.s,
ld-tic6x/mvk-reloc-local-2-rel.s,
ld-tic6x/mvk-reloc-local-r-rel.d, ld-tic6x/mvk-reloc-local-rel.d,
ld-tic6x/pcrel-reloc-global-rel.d,
ld-tic6x/pcrel-reloc-local-r-rel.d,
ld-tic6x/pcrel-reloc-local-rel.d, ld-tic6x/sbr-reloc-global-rel.d,
ld-tic6x/sbr-reloc-global-rel.s, ld-tic6x/sbr-reloc-local-1-rel.s,
ld-tic6x/sbr-reloc-local-2-rel.s,
ld-tic6x/sbr-reloc-local-r-rel.d, ld-tic6x/sbr-reloc-local-rel.d:
New.

* dwarf2read.c (dwarf2_compute_name): Handle DW_AT_linkage_name.
(read_partial_die): Likewise.
(dwarf_attr_name): Likewise.

2010-04-18  Sriraman Tallam  <tmsriram@google.com>

* icf.cc (get_section_contents): Check for preemptible functions.
Ignore addend when appropriate.
* symtab.cc (should_add_dynsym_entry): Add new parameter.  Check for
section folded.
(add_from_relobj): Check for section folded.
(set_dynsym_indexes): Fix call to should_add_dynsym_entry.
* symtab.h (should_add_dynsym_entry): Add new parameter.
* target-reloc.h (scan_relocs): Check for section folded.
* x86_64.cc (Target_x86_64::Scan::possible_function_pointer_reloc):
Check reloc types for function pointers in shared objects.
* testsuite/Makefile.am (icf_virtual_function_folding_test): New test
case.
(icf_preemptible_functions_test): New test case.
(icf_string_merge_test): New test case.
* testsuite.Makefile.in: Regenerate.
* testsuite/icf_safe_so_test.sh: Change to not fold foo_glob and
bar_glob.  Refactor code.
* testsuite/icf_preemptible_functions_test.cc: New file.
* testsuite/icf_preemptible_functions_test.sh: New file.
* testsuite/icf_string_merge_test.cc: New file.
* testsuite/icf_string_merge_test.sh: New file.
* testsuite/icf_virtual_function_folding_test.cc: New file.
* testsuite/icf_virtual_function_folding_test.sh: New file.

PR 10867
* cp-valprint.c (global): Adding new static array recursion
detection obstack.
(cp_print_value_fields, cp_print_static_field): Added new static
array recursion detection code.
* gdb.cp/Makefile.in  (EXECUTABLES): Added pr10687
* gdb.cp/pr10687.cc: New file.
* gdb.cp/pr10687.exp: New file

* i386-linux-tdep.c (i386_linux_regset_sections): Size of the
general-purpose register set should be 68 instead of 144.
(i386_linux_sse_regset_sections): Likewise.
(i386_linux_avx_regset_sections): Likewise.

2010-04-20  Stan Shebs  <stan@codesourcery.com>
    Nathan Sidwell  <nathan@codesourcery.com>

* dwarf2loc.c (struct axs_var_loc): New struct.
(dwarf2_tracepoint_var_loc): New function.
(dwarf2_tracepoint_var_access): New function.
(dwarf2_tracepoint_var_ref): Use dwarf2_tracepoint_var_loc, deal
with DW_OP_piece.
(locexpr_describe_location_piece): New function.
(locexpr_describe_location_1): New function.
(locexpr_describe_location): Call it, update signature.
(loclist_describe_location): Rewrite to loop over locations,
update signature.
* symtab.h (struct symbol_computed_ops): Add address to
describe_location arguments, return void.
* printcmd.c (address_info): Get context PC, pass to computed
location description.
* tracepoint.c (scope_info): Ditto.
* ax-gdb.c (trace_kludge): Export.

* dwarf2-frame.c (decode_frame_entry_1): Handle CIE version 4.
(struct dwarf2_cie) <segment_size>: New field.
* dwarf2read.c (partial_read_comp_unit_head): Accept DWARF 4.
(skip_one_die): Handle DW_FORM_flag_present, DW_FORM_sec_offset,
DW_FORM_exprloc.
(read_attribute_value): Handle DW_FORM_flag_present,
DW_FORM_sec_offset, DW_FORM_exprloc.
(dump_die_shallow): Likewise.
(attr_form_is_section_offset): Handle DW_FORM_sec_offset.
(dwarf2_const_value): Handle DW_FORM_exprloc.
(attr_form_is_block): Likewise.
(struct line_header) <maximum_ops_per_instruction>: New field.
(dwarf_decode_line_header): Set new field.
(dwarf_decode_lines): Handle new field.

gdb/ChangeLog:

2010-04-20  Jan Kratochvil  <jan.kratochvil@redhat.com>

* f-exp.y: Add new production to recognize the `logical*8' type.
(LOGICAL_S8_KEYWORD): New token.
* f-lang.c (enum f_primitive_types)
<f_primitive_type_logical_s8>: New field.
(f_language_arch_info): Handling `logical*8' type.
(build_fortran_types): Building `logical*8' type.
* f-lang.h (struct builtin_f_type) <builtin_logical_s8>: New field.

gdb/testsuite/ChangeLog:

2010-04-20  Jan Kratochvil  <jan.kratochvil@redhat.com>
    Sergio Durigan Junior  <sergiodj@redhat.com>

* gdb.fortran/logical.exp: New testcase.
* gdb.fortran/logical.f90: New file.

    PR gas/11507
        * macro.c (macro_expand_body): Do not treat LOCAL as a keyword in
        altmacro mode if found inside a quoted string.

        * gas/macros/altmacro.s: New test.
        * gas/macros/altmacro.d: Expected output.

* win32-i386-low.c: Use __x86_64__ macro instead of __x86_64 to
be consistent with other sources of this directory.
(init_registers_amd64): Correct name of source file of this function
in the comment.

* dwarf2.c (find_abstract_instance_name, scan_unit_for_symbols): Treat
DW_AT_linkage_name the same as DW_AT_MIPS_linkage_name.

Updated French translation.

    * readelf.c: Add _() macros to constant strings that are
        translatable.

gas: bfin: replace index() with strchr()

(generic_readchar): Tweak previous checkin, close error_fd if EOF.

* ser-base.c (generic_readchar): Watch for EOF in read of error_fd.
* ser-pipe.c (pipe_open): Fix file descriptor leaks.
(pipe_close): Ditto.

* gdb.base/help.exp (help source): Update expected output.

* configure.tgt (x86_64-*-mingw*): Set BUILD_GDBSERVER to yes.

* configure.srv (x86_64-*-mingw*): New configuration for Windows
64-bit executables.

* win32-i386-low.c: Add 64-bit support.
(CONTEXT_EXTENDED_REGISTERS): Set macro to zero if not exisiting.
(init_registers_amd64): Declare.
(mappings): Add 64-bit version of array.
(init_windows_x86): New function.
(the_low_target): Change init_arch field to init_windows_x86.

* win32-low.c: Adapt to support also 64-bit architecture.
(child_xfer_memory): Use uintptr_t type for local variable `addr'.
(get_image_name): Use SIZE_T type for local variable `done'.
(psapi_get_dll_name): Use LPVOID type for parameter `BaseAddress'.
(toolhelp_get_dll_name): Idem.
(handle_load_dll): Use CORE_ADDR type for local variable `load_addr'.
Use uintptr_t typecast to avoid warning.
(handle_unload_dll): Use uintptr_t typecast to avoid warning.
(handle_exception): Use phex_nz to avoid warning.
(win32_wait): Remove unused local variable `process'.

daily update

*** empty log message ***

* windows-tdep.c (windows_get_tlb_type): Change current_seh.handle
type to void function.

2010-04-19  Stan Shebs  <stan@codesourcery.com>
    Vladimir Prus  <vladimir@codesourcery.com>

* tracepoint.c (tfind_1): Add missing newline, report exit from
tfind mode as such.
* target.c (update_current_target): Make default
to_trace_find return -1.

gdb: objc-lang: check symbol name before accessing memory

The current ObjC logic will check both the symbol name and the target
address space when trying to locate an appropriate selector.  The problem
is that first the target address space is checked before the symbol name.
This may lead to a lot of unnecessary host<->target transactions when
dealing with a non-OjbC target that does use function descriptors to
describe functions as every symbol will have its FD read just to have the
result thrown away with non-matching symbol names.

It also may lead to problems when a non-FD symbol is found that points near
the end of the address space as the target will throw up a memory_error().
One such example are symbols that are not functions, smaller than a FD,
and are the last valid location.  Obviously treating it as a larger data
struct can cause memory overflows.

So to speed things up and not screw over such targets, check the symbol
name (which we already have locally) first before attempting to read the
function's descriptor.  This fixes breakpoints with Blackfin Linux FDPIC
ELFs, and seems to cause no native regressions on my x86_64/Linux system.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

sim: mn10300: convert to new sockser status code

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

sim: add --model-info helper option

There is an architecture-info flag for listing possible arch values, but
there is on equivalent for listing possible model values.  So add the
equivalent for models.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

* ada-lang.c (print_recreate_exception)
<ex_catch_exception_unhandled>: It's "catch exception unhandled",
not "catch unhandled".

* configure.srv (srv_amd64_regobj): Replace `x86-64-avx.o' by
`amd64-avx.o'.

    * archive64.c (bfd_elf64_archive_slurp_armap): Remove unused
        arhdrpos variable.
        * elf64-x86-64.c (elf64_x86_64_relocate_section): Add unused
        attribute to warned variable.  Remove unused val, type and type2
        variables.

gdb/testsuite/
* gdb.base/solib-display.exp: Replace gdb_exit, gdb_start,
gdb_reinitialize_dir and gdb_load by clean_restart.  Remove trailing
gdb_exit and return.
(executable): New variable.
(binfile): Use it.

Fix format of previous-previous entry.

PR breakpoints/8554.

Implement `save-breakpoints'.

gdb/
* breakpoint.c (save_cmdlist): New.
(breakpoint_set_cmdlist, breakpoint_show_cmdlist): Moved up close
to save_cmdlist.
(print_recreate_catch_fork): New.
(catch_fork_breakpoint_ops): Install it.
(print_recreate_catch_vfork): New.
(catch_vfork_breakpoint_ops): Install it.
(print_recreate_catch_syscall): New.
(catch_syscall_breakpoint_ops): Install it.
(print_recreate_catch_exec): New.
(catch_exec_breakpoint_ops): Install it.
(print_recreate_exception_catchpoint): New.
(gnu_v3_exception_catchpoint_ops): Install it.
(save_breakpoints): New, based on tracepoint_save_command, but
handle all breakpoint types.
(save_breakpoints_command): New.
(tracepoint_save_command): Rename to...
(save_tracepoints_command): ... this, and reimplement using
save_breakpoints.
(save_command): New.
(_initialize_breakpoints): Install the "save" command prefix.
Install the "save breakpoints" command.  Make "save-tracepoints" a
deprecated alias for "save tracepoints".
* breakpoint.h (struct breakpoint_ops): New field `print_recreate'.
* ada-lang.c (print_recreate_exception): New.
(print_recreate_catch_exception): New.
(catch_exception_breakpoint_ops): Install it.
(print_recreate_catch_exception_unhandled): New.
(catch_exception_unhandled_breakpoint_ops): Install it.
(print_recreate_catch_assert): New.
(catch_assert_breakpoint_ops): Install it.

* NEWS: Mention the new `save breakpoints' command.  Mention the
new `save tracepoints' alias and that `save-tracepoints' is now
deprecated.

gdb/doc/
* gdb.texinfo (Save Breakpoints): New node.
(save-tracepoints): Rename to ...
(save tracepoints): ... this.  Mention that `save-tracepoints' is
a deprecated alias to `save tracepoints'.

gdb/testsuite/
* gdb.trace/save-trace.exp: Adjust.

*** empty log message ***

daily update

PR tui/9217

* tui/tui-out.c: Include cli-out.h.
(tui_table_begin, tui_table_body, tui_table_end, tui_table_header)
(tui_begin, tui_end, tui_field_int, tui_field_skip)
(tui_field_string, tui_field_fmt, tui_spaces, tui_text)
(tui_message, tui_wrap_hint, tui_flush): Delete forward
declarations.
(struct ui_out_data): Rename to...
(struct tui_ui_out_data): ... this.  Remove `stream' and
`suppress_output' fields, and inherit cli_ui_out_data.
(tui_out_data): New typedef.
(tui_ui_out_impl): Don't initialize fields staticaly.
(tui_table_begin, tui_table_body, tui_table_end, tui_table_header)
(tui_begin, tui_end): Delete.
(tui_field_int): Adjust to delegate most work to the base type.
(tui_field_skip): Delete.
(tui_field_string, tui_field_fmt): Adjust comment.  Adjust to
delegate most work to the base type.
(tui_spaces): Delete.
(tui_text): Adjust to delegate most work to the base type.
(tui_message): Delete.
(tui_wrap_hint): Delete.
(tui_flush): Delete.
(out_field_fmt): Delete.
(field_separator): Delete.
(tui_out_new): Adjust to initialize the base type.
(_initialize_tui_out): Initialize tui_ui_out_impl.
* cli-out.c (struct ui_out_data): Moved out to cli-out.h, renamed
cli_ui_out_data.
(cli_out_data): Adjust.
(cli_ui_out_impl): Make extern.
(cli_table_header, cli_field_int, cli_field_skip): Use
uo_field_string instead of cli_field_string.
(cli_redirect): Adjust to use cli_out_data.
(cli_out_data_ctor): New.
(cli_out_new): Use it.
* cli-out.h (struct ui_file): Remove forward declaration.
(struct cli_ui_out_data): New, moved from cli-out.c, and renamed.
(cli_ui_out_impl): Declare.
(cli_out_data_ctor): Declare.
* ui-out.c (struct ui_out) <data>: Change type to void pointer.
(uo_field_string): No longer static.
(ui_out_data): Change return type to void pointer.
(ui_out_new): Change `data' parameter type to void pointer.
* ui-out.h (struct ui_out_data): Don't forward declare.
(ui_out_data): Change return type to void pointer.
(ui_out_new): Change `data' parameter type to void pointer.
(uo_field_string): Declare.

*** empty log message ***

daily update

* ui-file.c (tee_file_isatty): Return whether `tee->one' is a tty,
instead of always false.

* configure.ac: Use `ws2_32' library for srv_mingw.
* configure: Regenerate.
* gdbreplay.c: Include winsock2.h instead of winsock.h.
* remote-utils.c: Likewise.

gdb/

2010-04-17  H.J. Lu  <hongjiu.lu@intel.com>

PR corefiles/11511
* amd64-linux-tdep.c (amd64_linux_gregset_reg_offset): Support
orig_rax.

gdb/testsuite/

2010-04-17  H.J. Lu  <hongjiu.lu@intel.com>

PR corefiles/11511
* gdb.arch/system-gcore.exp: New.
* gdb.arch/gcore.c: Likewise.

* breakpoint.c (watchpoints_triggered): Use
is_hardware_watchpoint.
(watchpoints_triggered): Ditto.
(bpstat_check_location): Use is_watchpoint and
is_hardware_watchpoint.
(bpstat_check_watchpoint): Use is_watchpoint and
is_hardware_watchpoint.
(bpstat_stop_status): Fix comment.
(user_settable_breakpoint): Use is_watchpoint.
(hw_watchpoint_used_count): Use is_hardware_watchpoint.
(disable_watchpoints_before_interactive_call_start): Use
is_watchpoint.
(enable_watchpoints_after_interactive_call_stop): Use
is_watchpoint.
(clear_command): Use is_watchpoint.
(do_enable_breakpoint): Use is_watchpoint.

Define xmltarget_amd64_linux_no_xml only for amd64.

2010-04-17  H.J. Lu  <hongjiu.lu@intel.com>

* linux-x86-low.c (xmltarget_amd64_linux_no_xml): Define only
if __x86_64__ is defined.

*** empty log message ***

daily update

gdb: fdpic/frv: fix shared library loading

The recent change to reload_shared_libraries() broke FDPIC shared libraries as
the solib-frv.c code was implicitly relying on the initial order of calls
(first solib_addr() and then solib_create_inferior_hook()).  It was
maintaining internal state via enable_break{1,2}_done to handle this.

While I could tweak these values a bit more, the original code wasn't terribly
bullet proof -- if during the initial debug you attempted to view shared
libraries, the enable2_break() code would whine about the ldso internal debug
addresses being unfetchable (and would actually attempt to read address 0x8 on
the target).  So I've dropped this implicit dependency on order (i.e.
enable_break1_done) and updated the ldso poking code (i.e. enable_break2) to
silently return when the internal debug address is still set to 0.  It will
remain this way until the ldso gets a chance to initialize at which point the
code will act the same as before.

While I have no way of testing the FRV, the Blackfin FDPIC code is using this
same base in a 100% copy & paste method since we implemented FDPIC the same
way as the FRV guys (I'll address this in the future).  This fix was required
in order to handle shared libraries with Blackfin FDPIC properly, and I see no
reason why it wouldn't also work for FRV (since the uClibc ldso FDPIC code is
the same too and that's really what this is poking).

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

* m32c-tdep.c (m32c_m16c_address_to_pointer): Print warning
instead of an error if no PLT entry is found.  Return a
potentially useful result.
(m32c_m16c_pointer_to_address): Add code to search for function
address when no .plt entry is found.

Remove extra breack.

Return bad_opcode on unknown bits in opcode.

2010-04-16  H.J. Lu  <hongjiu.lu@intel.com>

* i386-dis.c (get_valid_dis386): Return bad_opcode on unknown
bits in opcode.

2010-04-16  Stan Shebs  <stan@codesourcery.com>

* tracepoint.c (trace_variable_command): Run a cleanup.

* configure: Regenerate.

2010-04-16  Andreas Schwab  <schwab@redhat.com>

* vms-alpha.c (alpha_vms_link_add_object_symbols): Avoid breaking
strict-aliasing rules.

2010-04-16  Tristan Gingold  <gingold@adacore.com>

* vms-alpha.c (_bfd_vms_slurp_eihd): Fix typo.
(_bfd_vms_get_object_record): Always assume there is a pad byte
for alignment.
* vms-lib.c: Add a few comments.

    PR gas/11395
        * config/tc-hppa.c (pa_ip): Do not allow 64-bit add condition
        matcher to accept and unconditional 32-bit add instruction.
        (pa_build_unwind_subspace): Cope with error conditions not
        allowing the start symbol to be set.

        * gas/hppa/basic/add2.s: Add test of simple 32-bit instruction.
        * gas/hppa/basic/basic.exp (do_add2): Add grep for expected
        disassembly.

* p-lang.c (pascal_one_char): Do not restrict C to 0..255 range.

Support for Windows OS Thread Information Block.
* NEWS: Document new feature.
* remote.c (PACKET_qGetTIBAddr): New enum element.
(remote_get_tib_address): New function.
(init_remote_ops): Set to_get_tib_address field
to remote_get_tib_address.
(_initialize_remote): Add add_packet_config_cmd
for PACKET_qGetTIBAddr.
* target.c (update_current_target): Set default value for
new to_get_tib_address field.
* target.h (target_ops): New field to_get_tib_address.
(target_get_tib_address): New macro.
* windows-nat.c (thread_info): Add thread_local_base field.
(windows_add_thread): Add tlb argument of type 'void *'.
(fake_create_process): Adapt windows_add_thread call.
(get_windows_debug_event): Idem.
(windows_get_tib_address): New function.
(init_windows_ops): Set to_get_tib_address field
to remote_get_tib_address.
(_initialize_windows_nat): Replace info_w32_cmdlist
initialization by a call to init_w32_command_list.
(info_w32_command, info_w32_cmdlist): Removed from here...
to windows-tdep.c file.
* windows-tdep.h (info_w32_cmdlist): Declare.
(init_w32_command_list): New external function
declaration.
* windows-tdep.c: Add several headers.
(info_w32_cmdlist): to here, made global.
(thread_information_32): New struct.
(thread_information_64): New struct.
(TIB_NAME): New char array.
(MAX_TIB32, MAX_TIB64, FULL_TIB_SIZE): New constants.
(maint_display_all_tib): New static variable.
(windows_get_tlb_type): New function.
(tlb_value_read, tlb_value_write): New functions.
(tlb_value_funcs): New static struct.
(tlb_make_value): New function.
(display_one_tib): New function.
(display_tib): New function.
(show_maint_show_all_tib):New function.
(info_w32_command): Moved from windows-nat.c.
(init_w32_command_list): New function.
(_initialize_windows_tdep): New function.
New "maint set/show show-all-tib" command
New "$_tlb" internal variable.

gdbserver/ChangeLog entry:

* server.c (handle_query): Handle 'qGetTIBAddr' query.
* target.h (target_ops): New get_tib_address field.
* win32-low.h (win32_thread_info): Add thread_local_base field.
* win32-low.c (child_add_thread): Add tlb argument.
Set thread_local_base field to TLB.
(get_child_debug_event): Adapt to child_add_thread change.
(win32_get_tib_address): New function.
(win32_target_ops): Set get_tib_address field to
win32_get_tib_address.
* linux-low.c (linux_target_ops): Set get_tib_address field to NULL.

doc/ChangeLog entry:

gdb.texinfo ($_tlb): Document new automatic convinience variable.
(info w32 thread-information-block): Document new command.
(qGetTIBAddress): Document new gdbserver query.
(maint set/show show-all-tib): Document new command.

    * tui/tui-regs.c (tui_display_register): Add comment about
        a couple of casts.
        * tui/tui-stack.c (tui_show_locator_content): Ditto.

2010-04-15  Stan Shebs  <stan@codesourcery.com>

* frame.c: Include tracepoint.h.
(get_current_frame): Allow a trace frame to be an alternate source
of stack frame data.
* tracepoint.c (tfind_1): Don't try to get current stack frame if
it won't succeed.

*** empty log message ***

daily update

s/Pedro  Alves/Pedro Alves/

Fix date format in one entry.  Fix whitespace throughout while there.

Remove src/gdb/ from entry.

* ppc-linux-tdep.c (bsd_uthread_solib_loaded): Always pass 0 for
flags.
* solib-spu.c (spu_solib_loaded): Always pass 0 for flags.

* NEWS: Add entry for python program space support.
* Makefile.in (SUBDIR_PYTHON_OBS): Add py-progspace.o.
(SUBDIR_PYTHON_SRCS): Add py-progspace.c.
(py-progspace.o): New rule.
* python/py-prettyprint.c (find_pretty_printer_from_objfiles): New
function.
(find_pretty_printer_from_progspace): New function.
(find_pretty_printer_from_gdb): New function.
(find_pretty_printer): Rewrite.
* python/py-progspace.c: New file.
* python/python-internal.h (program_space): Add forward decl.
(pspace_to_pspace_object, pspy_get_printers): Declare.
(gdbpy_initialize_pspace): Declare.
* python/python.c: #include "progspace.h".
(gdbpy_get_current_progspace, gdbpy_progspaces): New functions.
(_initialize_python): Call gdbpy_initialize_pspace.
(GdbMethods): Add current_progspace, progspaces.

doc/
* gdb.texinfo (Python API): Add progspaces section.
(Selecting Pretty-Printers): Progspace pretty-printers are
searched too.
(Progspaces In Python): New section.

testsuite/
* gdb.python/py-progspace.c: New file.
* gdb.python/py-progspace.exp: New file.

Add -s option to source command.
* NEWS: Document new option.
* cli/cli-cmds.c (find_and_open_script): Add function comment.
Delete from_tty and cleanupp args.  Split filep arg into file and
full_pathp.  New arg search_path.
(source_script_from_stream): New function.
(source_script_with_search): New function.
(source_script): Rewrite.
(source_command): Parse "-s" option.
(init_cli_cmds): Add "-s" docs to source command help, and reformat.
* python/python.c (source_python_script): Make file arg a const char *.
Don't call fclose, leave for caller.
* python/python.h (source_python_script): Update.

testsuite/
* gdb.base/source-test.gdb: New file.
* gdb.base/source.exp: Add tests for "source -s".

doc/
* gdb.texinfo (Command Files): Add docs for new "source -s" option.

* ld/testsuite/ld-arm/attr-merge-2.attr: Update for changes in attribute output.
* ld/testsuite/ld-arm/attr-merge-3.attr: Likewise.
* ld/testsuite/ld-arm/attr-merge-vfp-1.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-vfp-1r.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-vfp-2.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-vfp-2r.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-vfp-3.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-vfp-3r.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-vfp-4.d: Likeiwse.
* ld/testsuite/ld-arm/attr-merge-vfp-4r.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-vfp-5.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-vfp-5r.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-wchar-00-nowarn.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-wchar-00.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-wchar-02-nowarn.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-wchar-02.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-wchar-04-nowarn.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-wchar-04.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-wchar-20-nowarn.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-wchar-20.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-wchar-22-nowarn.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-wchar-22.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-wchar-24-nowarn.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-wchar-40-nowarn.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-wchar-40.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-wchar-42-nowarn.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-wchar-44-nowarn.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-wchar-44.d: Likewise.
* ld/testsuite/ld-arm/attr-merge.attr: Likewise.
* binutils/readelf.c (arm_attr_tag_FP_arch): Rename from arm_attr_tag_VFP_arch.
(arm_attr_tag_ABI_align8_needed): Remove.
(arm_attr_tag_ABI_align8_preserved): Remove.
(arm_attr_tag_ABI_HardFP_use): Update text strings.
(arm_attr_public_tags): Add strings for ABI v2.08 attribute tags.
(display_arm_attribute): Add decoding of ABI v2.08 attributes.
* include/elf/arm.h (Tag_FP_arch, Tag_ABI_align_needed, Tag_ABI_align_preserved,
Tag_FP_HP_extension): Add new ABI attribute tags.
* gas/config/tc-arm.c (arm_convert_symbolic_attribute): Add support for
new tag names in v2.08 of ARM ABI.
* gas/doc/c-arm.texi: Document new tag names in ABI.
* gas/testsuite/gas/arm/attr-mcpu.d: Update for new attribute tag names.
* gas/testsuite/gas/arm/attr-mfpu-arm1020e.d: Likewise.
* gas/testsuite/gas/arm/attr-mfpu-arm1020t.d: Likewise.
* gas/testsuite/gas/arm/attr-mfpu-arm1136jf-s.d: Likewise.
* gas/testsuite/gas/arm/attr-mfpu-arm1136jfs.d: Likewise.
* gas/testsuite/gas/arm/attr-mfpu-neon-fp16.d: Likewise.
* gas/testsuite/gas/arm/attr-mfpu-neon.d: Likewise.
* gas/testsuite/gas/arm/attr-mfpu-softvfp+vfp.d: Likewise.
* gas/testsuite/gas/arm/attr-mfpu-vfp.d: Likewise.
* gas/testsuite/gas/arm/attr-mfpu-vfp10-r0.d: Likewise.
* gas/testsuite/gas/arm/attr-mfpu-vfp10.d: Likewise.
* gas/testsuite/gas/arm/attr-mfpu-vfp3.d: Likewise.
* gas/testsuite/gas/arm/attr-mfpu-vfp9.d: Likewise.
* gas/testsuite/gas/arm/attr-mfpu-vfpv2.d: Likewise.
* gas/testsuite/gas/arm/attr-mfpu-vfpv3-d16.d: Likewise.
* gas/testsuite/gas/arm/attr-mfpu-vfpv3.d: Likewise.
* gas/testsuite/gas/arm/attr-mfpu-vfpv4-d16.d: Likewise.
* gas/testsuite/gas/arm/attr-mfpu-vfpv4.d: Likewise.
* gas/testsuite/gas/arm/attr-mfpu-vfpxd.d: Likewise.
* gas/testsuite/gas/arm/attr-names.d: Add test to make sure all attribute names
are recognised.
* gas/testsuite/gas/arm/attr-names.s: Likewise.

Upgrade header files to use GPLv3

* config.bfd (vax*-*-*vms*): Delete.

2010-04-14  Doug Kwan  <dougkwan@google.com>

* arm.cc (Arm_output_section::fix_exidx_coverage): Mark object
for local symbol recounting if we remove a section due to ICF.
* gold.cc (queue_middle_gc_tasks): Create a dummy blocker if
there are no regular objects in input.

*** empty log message ***

daily update

Avoid rereading shared libraries that haven't changed.

* solib.c (free_so_symbols): New function, from ...
(free_so): ... here.  Call it.
(solib_read_symbols): Don't warn here if symbols have already been
loaded.
(solib_add): Warn here instead, if a pattern was specified.
(reload_shared_libraries_1): New.
(reload_shared_libraries): Rewrite to not fetch the library list.

fix typo in previous entry

* source.c (open): Strip DOS drive letter if present before
concatenating string to search path.

* filenames.h (HAS_DRIVE_SPEC, STRIP_DRIVE_SPEC): New macros.

* objfiles.h (gdb_bfd_close_or_warn): Declare.
* objfiles.c (gdb_bfd_close_or_warn): New.
* corelow.c: Include objfiles.h
(core_close): Use gdb_bfd_close_or_warn.
* elfread.c (build_id_verify): Ditto.
* exec.c (exec_close, exec_close_1): Ditto.

Group errors for many missing shared libraries.

* solist.h (struct so_list): Remove from_tty.
* solib.c (solib_bfd_open): Return NULL if we failed to open a BFD.
(solib_map_sections): Take so_list argument.  Return 0 if we
failed to open a BFD.  Add target sections here.
(symbol_add_stub): Delete.
(solib_read_symbols): Inline symbol_add_stub.  Use current flags,
not from_tty copied from the so_list.  Don't warn a second time
for a missing library.
(update_solib_list): Don't save from_tty.  Use TRY_CATCH.  Do not
add to the section table here.  Print out a single warning for all
missing libraries.
* bsd-uthread.c (bsd_uthread_solib_loaded): Always pass 0 for
flags.

2010-04-14  Phil Muldoon  <pmuldoon@redhat.com>

* python/py-block.c (gdbpy_block_for_pc): Use i8n to encompass
error/warning messages.  Capitalize and use complete sentences.
(blpy_block_syms_iternext): Likewise.
* python/py-cmd.c (parse_command_name, cmdpy_init): Likewise.
* python/py-frame.c (FRAPY_REQUIRE_VALID, frapy_block)
(frame_info_to_frame_object, frapy_read_var)
(gdbpy_frame_stop_reason_string): Likewise.
* python/py-lazy-string.c (stpy_convert_to_value)
(gdbpy_create_lazy_string_object): Likewise.
* python/py-objfile.c (objfpy_set_printers): Likewise.
* python/py-prettyprint.c (gdbpy_default_visualizer): Likewise.
* python/python.c (parameter_to_python): Likewise.
* python/py-type.c (typy_range, typy_target): Likewise.
* python/py-value.c (valpy_cast, valpy_length, valpy_getitem)
(valpy_richcompare, valpy_int, valpy_long, valpy_float): Likewise.

2010-04-14  Phil Muldoon  <pmuldoon@redhat.com>

PR python/11381

* python/py-prettyprint.c (pretty_print_one_value): Test for
Py_None.
(print_string_repr): Test for Py_None.  Set flags accordingly.
Return value depending on return type.
(print_children): Take a value indicating whether data was printed
before this function was called.  Alter output accordingly.
(apply_val_pretty_printer): Capture return value from
print_string_repr and pass to print_children.

2010-04-14  Phil Muldoon  <pmuldoon@redhat.com>

* gdb.python/py-prettyprint.py (NoStringContainerPrinter): New printer.
* gdb.python/py-prettyprint.c: Add justchildren struct, typedefs.
* gdb.python/py-prettyprint.exp: New test for to_string returning None.
* gdb.python/py-mi.exp: New test for to_string returning None.

2010-04-14  Phil Muldoon  <pmuldoon@redhat.com>

* gdb.texinfo (Pretty Printing): Document behaviour when to_string
returns None.

2010-04-14  Tristan Gingold  <gingold@adacore.com>

* configure.ac (alpha*-*-*vms*): Remove ld from noconfigdirs.
* configure: Regenerate.

2010-04-14  Tristan Gingold  <gingold@adacore.com>

* emulparams/alphavms.sh: New file.
* emultempl/vms.em: New file.
* scripttempl/alphavms.sc: New file.
* configure.tgt (alpha*-*-*vms*): Added.
* Makefile.am (ALL_EMULATIONS): Add ealphavms.o
(ealphavms.c): New target.
* Makefile.in: Regenerate.

2010-04-14  Tristan Gingold  <gingold@adacore.com>

* config/tc-alpha.c: Includes vms/egps.h on EVAX.
(s_alpha_comm): Used new EGPS macros from egps.h
(RGPS__V_NO_SHIFT, EGPS__V_MASK): New local macros.
(s_alpha_section_word): Add comments.  Use new EGPS macros.
Adjust for modified bfd_vms_set_section_flags function.

2010-04-14  Tristan Gingold  <gingold@adacore.com>

* Makefile.am (BFD32_BACKENDS): Remove vms-gsd.lo, vms-hdr.lo,
vms-tir.lo, vms.lo and add vms-alpha.lo
(BFD32_BACKENDS_CFILES): Remove vms-gsd.c, vms-hdr.c,
vms-tir.c, vms.c and add vms-alpha.c
* Makefile.in: Regenerate.
* configure.in (TDEFINES): Adjust file list for vms_alpha_vec.
Remove vms_vax_vec.
* configure: Regenerate.
* targets.c (vms_vax_vec): Remove the declaration.
(_bfd_target_vector): Remove vms_vax_vec.
* vms-alpha.c: New file.
* vms-gsd.c: Removed, rewritten in vms-alpha.c
* vms-hdr.c: Ditto.
* vms-tir.c: Ditto.
* vms.c: Ditto.
* vms-misc.c: Fix indentation and comments.  Replace most of
#if VMS_DEBUG/vms_debug with vms_debug2.
(_bfd_vms_hash_newfunc): Moved to vms-alpha.c
(hash_string): Ditto.
(_bfd_vms_length_hash_symbol): Ditto.
(maybe_adjust_record_pointer_for_object): Ditto.
(_bfd_vms_get_object_record): Ditto.
(vms_get_remaining_object_record): Ditto.
(_bfd_vms_push): Ditto.
(_bfd_vms_pop): Ditto.
(_bfd_vms_get_header_values): Removed.
(_bfd_vms_get_first_record): Removed.
(vms_get_remaining_image_record): Removed.
(new_symbol): Removed.
(_bfd_vms_enter_symbol): Removed.
(_bfd_vms_save_sized_string): Use memcpy instead of strncpy.
(_bfd_vms_output_begin): Remove rechead parameter.  Replace bfd
parameter with struct vms_rec_wr.
(_bfd_vms_output_push): Removed and replaced by ...
(_bfd_vms_output_begin_subrec): ... new function.
(_bfd_vms_output_alignment): Replace bfd parameter with
struct vms_rec_wr, and adjust.
(_bfd_vms_output_check): Ditto
(_bfd_vms_output_byte): Ditto.
(_bfd_vms_output_short): Ditto.
(_bfd_vms_output_long): Ditto.
(_bfd_vms_output_quad): Ditto.
(_bfd_vms_output_counted): Ditto.
(_bfd_vms_output_dump): Ditto.
(_bfd_vms_output_fill): Ditto.
(_bfd_vms_output_pop): Removed and replaced by ...
(_bfd_vms_output_end_subrec): ... new function.
(_bfd_vms_output_flush): Removed.
(_bfd_vms_output_align): New function.
(_bfd_vms_output_end): Add recwr parameter.  Adjust for this new
parameter.
(vms_convert_to_var): New function imported from vms.c
(vms_convert_to_var_1): Ditto.
(vms_convert_to_var_unix_filename): Ditto.
(vms_get_module_name): Ditto.
(get_vms_time_string): Ditto.
(vms_time_to_time_t): Ditto.
(vms_rawtime_to_time_t): Ditto.
* vms.h: All macros for the VMS file format are now in include/vms.
Prototypes for vms.c, vms-gsd.c, vms-misc.c, vms-hdr.c, vms-tir.c
have been removed.
(struct vms_symbol_struct, struct stack_struct): Moved to vms-alpha.c
(struct fileinfo, struct srecinfo, struct lineinfo): Ditto.
(struct funcinfo, struct vms_private_data_struct): Ditto.
(struct vms_section_data_struct): Ditto.
(struct vms_rec_rd, stryct vms_rec_wr): New declarations.
(vms_get_module_name, get_vms_time_string): New declarations.
(vms_time_to_time_t, vms_rawtime_to_time_t): Ditto.
(_bfd_vms_output_begin_subrec, _bfd_vms_output_end_subrec): Ditto.
(_bfd_vms_save_sized_string, _bfd_vms_save_counted_string): Adjusted.
(_bfd_vms_output_begin, _bfd_vms_output_alignment): Ditto.
(_bfd_vms_output_end,_bfd_vms_output_check): Ditto.
(_bfd_vms_output_byte, _bfd_vms_output_short): Ditto.
(_bfd_vms_output_long, _bfd_vms_output_quad): Ditto.
(_bfd_vms_output_counted, _bfd_vms_output_dump): Ditto.
(_bfd_vms_output_fill): Ditto.
(bfd_vms_set_section_flags): Ditto.

* bfd/elflink.c (_bfd_elf_merge_symbol): Tighten up the test for early
exit due to merging the same weak symbol to test that the symbols are
actually weak.

sim: constify sim_write source buffer (part 2)

As pointed out by Sandra Loosemore, a bunch of targets define sim_write
themselves instead of using the common/ code.  So constify them too.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Correct PR number for PR corefiles/11481.

Mention PR corefiles/11467.

daily update

*** empty log message ***

* i386-linux-tdep.c (i386_linux_regset_sections): Remove extended
register note sections.
(i386_linux_sse_regset_sections, i386_linux_avx_regset_sections):
New variables.
(i386_linux_init_abi): Install list of supported register note
sections that matches the target description.

sim: dv-sockser: pass up connected state

A few ports rely on internal dv-sockser state in order to detect whether
a connection has been made (look for 'extern sockser_addr').  Rather than
continuing that tradition, extend the existing status function to return
the socket connection status.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

sim: drop PARAMS

The PARAMS macro is no longer useful, so drop it from the sim includes.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>