Jassi Brar [Tue, 18 May 2010 02:59:13 +0000 (11:59 +0900)]
ARM: S5PC100: DMA: Add platform devices for PL330 DMACs
Samsung's Soc S5PC100 has three PL330 DMACs. First is dedicated for
Memory->Memory data transfer while the other two meant for data
transfer with peripherals.
Define and add latter two PL330 DMACs as platform devices on the
S5PC100 platform.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Sun, 23 May 2010 14:44:17 +0000 (15:44 +0100)]
ARM: S5PC100: Fix definition of IRQ_EINT()
Somewhere during the latest platform cleanups the IRQ_EINT definition
got broken, so fix it by replacing it in <mach/irqs.h>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Pinkava J [Sun, 23 May 2010 04:42:26 +0000 (06:42 +0200)]
ARM: SAMSUNG: fix suspend/resume on if some GPIO banks not present
When saving GPIOs during suspend/resume we need skip missing GPIO banks, not
trying get corresponding chip again and again in infinite loop.
Signed-off-by: Jiri Pinkava <jiri.pinkava@vscht.cz>
[ben-linux@fluff.org: shorten subject]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Thu, 20 May 2010 03:56:45 +0000 (12:56 +0900)]
ARM: S3C64XX: PM: Synchronise wakeup mask on suspend
Use the new wakeup mask synchronisation code to set the
relevant wakeup mask bits.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Thu, 20 May 2010 05:05:33 +0000 (14:05 +0900)]
ARM: SAMSUNG: Add support for interrupt wakeup-sources
Add support for wakeup-mask style interrupts that share a
single mask register for various different interrupts. This
registers a set of interrupt->bit mappings and the register
they belong to.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Mon, 10 May 2010 04:31:36 +0000 (13:31 +0900)]
ARM: SAMSUNG: Make ADC client SMP safe
Change local_irq disable calls to use spinlocks to ensure that the
ADC driver data is protected against multiple access..
Note, this does not protect the client's data, and the client should
ensure it does not make multiple calls to the ADC driver.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Wed, 19 May 2010 07:31:49 +0000 (16:31 +0900)]
ARM: S5P6440: Add locking to GPIO calls
Add the new locking calls to ensure that these are always exclusively
accessing the GPIO registers.
Fixes a possible race between two threads modifying the same GPIO bank,
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Thu, 20 May 2010 11:58:18 +0000 (20:58 +0900)]
ARM: S5PV210: Add temporary <mach/regs-fb.h>
Add temporary <mach/regs-fb.h> until the new framebuffer
driver can be merged.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Thu, 20 May 2010 11:51:03 +0000 (20:51 +0900)]
ARM: S5PV210: Fixup ADC device change
Ensure the ADC device is touched only if S3C_DEV_ADC
is selected.
Fixes:
arch/arm/mach-s5pv210/built-in.o: In function `s5pv210_map_io':
/home/kgene/bjdooks/arch/arm/mach-s5pv210/cpu.c:92: undefined reference to `s3c_device_adc'
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Thu, 20 May 2010 11:49:25 +0000 (20:49 +0900)]
ARM: SAMSUNG: Fixup merge problem
Fixup merge which re-introduced the setup-i2c0 helper
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Thu, 20 May 2010 11:48:28 +0000 (20:48 +0900)]
ARM: SAMSUNG: Fixup convert arm to arch_gettimeoffset()
Fixup commit
5cfc8ee0bb5134e1204e1ec5843e164f24315021 which
introduced ARCH_USES_GETTIMEOFFSET but missed out several
S5P architectures.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Thu, 20 May 2010 11:25:59 +0000 (20:25 +0900)]
ARM: Merge for-2635-4/onenand
Merge branch 'for-2635-4/onenand' into for-2635-4/partial2
Conflicts:
arch/arm/mach-s5pc100/cpu.c
arch/arm/mach-s5pc100/include/mach/map.h
arch/arm/mach-s5pv210/Makefile
Ben Dooks [Thu, 20 May 2010 10:51:40 +0000 (19:51 +0900)]
ARM: Merge for-2635-4/watchdog
Merge branch 'for-2635-4/watchdog' into for-2635-4/partial2
Conflicts:
arch/arm/mach-s3c64xx/mach-smdk6410.c
arch/arm/mach-s5p6440/Kconfig
arch/arm/mach-s5p6440/include/mach/map.h
arch/arm/mach-s5p6440/mach-smdk6440.c
arch/arm/mach-s5pv210/Kconfig
arch/arm/mach-s5pv210/include/mach/map.h
arch/arm/mach-s5pv210/mach-smdkv210.c
Banajit Goswami [Thu, 20 May 2010 07:21:32 +0000 (16:21 +0900)]
ARM: S5PV210: Add Watchdog support for S5PV210
This patch adds support for Watchdog timer for Samsung S5PV210.
Signed-off-by: Banajit Goswami <banajit.g@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Banajit Goswami [Thu, 20 May 2010 07:21:31 +0000 (16:21 +0900)]
ARM: S5P6440: Add Watchdog support for S5P6440
This patch adds support for Watchdog timer for Samsung S5P6440.
Signed-off-by: Banajit Goswami <banajit.g@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Banajit Goswami [Thu, 20 May 2010 07:21:30 +0000 (16:21 +0900)]
ARM: SMDK6410: Add Watchdog support for SMDK6410
This patch adds support for Watchdog timer for Samsung S3C6410
Signed-off-by: Banajit Goswami <banajit.g@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Banajit Goswami [Wed, 19 May 2010 06:42:29 +0000 (15:42 +0900)]
ARM: SAMSUNG: Move WDT device definitions in plat-samsung
This patch moves the definitions of watchdog timer device from
plat-s3c24xx to plat-samsung. This will enable all Samsung S3C
and S5P series SoC's to use common WDT device definition.
Signed-off-by: Banajit Goswami <banajit.g@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Maurus Cuelenaere [Thu, 20 May 2010 09:35:50 +0000 (11:35 +0200)]
ARM: S3C6410: Add basic support for SmartQ machines
This adds new machine definitions for the SmartQ 5 and 7.
Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Thu, 20 May 2010 10:40:24 +0000 (19:40 +0900)]
ARM: Merge for-2635-4/spi-devs
Merge branch 'for-2635-4/spi-devs' into for-2635-4/partial2
Conflicts:
arch/arm/mach-s5pc100/include/mach/map.h
arch/arm/mach-s5pv210/Makefile
Ben Dooks [Thu, 20 May 2010 10:38:30 +0000 (19:38 +0900)]
ARM: Merge for-2635-4/s5p-devs
Merge branch 'for-2635-4/s5p-devs' into for-2635-4/partial2
Conflicts:
arch/arm/mach-s5pc100/include/mach/map.h
Jassi Brar [Tue, 18 May 2010 07:43:40 +0000 (16:43 +0900)]
ARM: S5P6440: Define SPI platform devices
Define SPI platform devices for the SoC.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Jassi Brar [Tue, 18 May 2010 07:43:45 +0000 (16:43 +0900)]
ARM: S5P6442: Define SPI platform devices
Define SPI platform devices for the SoC.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Jassi Brar [Tue, 18 May 2010 07:43:37 +0000 (16:43 +0900)]
ARM: S5PV210: Define SPI platform devices
Define SPI platform devices for the SoC.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Jassi Brar [Tue, 18 May 2010 07:43:34 +0000 (16:43 +0900)]
ARM: S5PC100: Define SPI platform devices
Define SPI platform devices for the SoC.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Jassi Brar [Tue, 18 May 2010 07:02:44 +0000 (16:02 +0900)]
ARM: SMDKC100: Add audio devices on board
Add audio platform devices on the smdk by default.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Jassi Brar [Tue, 18 May 2010 07:02:39 +0000 (16:02 +0900)]
ARM: S5PC100: Add audio platform devices
Define platform devices for all audio devices found on S5PC100
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Thu, 20 May 2010 09:55:32 +0000 (18:55 +0900)]
ARM: Merge for-2635-4/s5pv210-boards
Merge branch 'for-2635-4/s5pv210-boards' into for-2635-4/partial1
Conflicts:
arch/arm/mach-s5pv210/include/mach/map.h
Ben Dooks [Thu, 20 May 2010 09:51:59 +0000 (18:51 +0900)]
ARM: Merge for-2635-4/ts-machines
Merge branch 'for-2635-4/ts-machines' into for-2635-4/partial1
Ben Dooks [Thu, 20 May 2010 09:51:31 +0000 (18:51 +0900)]
ARM: Merge for-2635-4/s5pc1xx-removal
Merge branch 'for-2635-4/s5pc1xx-removal' into for-2635-4/partial1
Ben Dooks [Thu, 20 May 2010 09:48:43 +0000 (18:48 +0900)]
ARM: S5PV210: Fixup machine Kconfig order
Update the Kconfig order and add a spacer between
device setup support and the machine definitions.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Joonyoung Shim [Wed, 19 May 2010 14:15:32 +0000 (23:15 +0900)]
ARM: S5PV210: Add GONI board support
This is for samsung GONI board using s5pc110.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Marek Szyprowski [Thu, 20 May 2010 06:13:07 +0000 (08:13 +0200)]
ARM: S5PV210: add common HSMMC device helpers
This patch adds sdhci platform helpers required by sdhci-s3c driver.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Marek Szyprowski [Thu, 20 May 2010 06:13:06 +0000 (08:13 +0200)]
ARM: S5PV210: add common I2C device helpers
This patch adds I2C platform helpers required by s3c2440-i2c driver.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Marek Szyprowski [Thu, 20 May 2010 06:13:04 +0000 (08:13 +0200)]
ARM: S5PV210: add framebuffer platform helpers for s5pv210 based machines
This patch adds common framebuffer device helpers and register defines
for S5PV210 based machines.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Marek Szyprowski [Thu, 20 May 2010 06:59:05 +0000 (08:59 +0200)]
ARM: SAMSUNG: Add platform support code for OneNAND controller
This patch adds setup code for Samsung OneNAND controller driver. The
driver needs to be aware on which SoC it is running, so the actual
device id is being changed in cpu init code. S3C64xx SoCs have 2 OneNAND
controllers while S5PC100 and S5PC110 has only one.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
[ben-linux@fluff.org: sort map.h entries]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Marek Szyprowski [Thu, 20 May 2010 05:51:11 +0000 (07:51 +0200)]
ARM: remove obsolete plat-s5pc1xx directory
This patch removes all obsolete files from plat-s5pc1xx. This directory is
no longer needed. S5PC100 SoC is now completely supported in plat-s5p
framework.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Marek Szyprowski [Thu, 20 May 2010 05:51:10 +0000 (07:51 +0200)]
ARM: S5PC100: use common plat-s5p external interrupt code
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Marek Szyprowski [Thu, 20 May 2010 05:51:09 +0000 (07:51 +0200)]
ARM: S5PC100: Add support for gpio interrupt
This patch moves support for gpio interrupts from plat-s5pc1xx to
mach-s5pc100 directory.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Marek Szyprowski [Thu, 20 May 2010 05:51:08 +0000 (07:51 +0200)]
ARM: SAMSUNG: move S5PC100 support from plat-s5pc1xx to plat-s5p framework
This patch moves S5PC100 SoC support to plat-s5p framework. Most
periperal support code has been already moved from plat-s5pc1xx to
mach-s5pc100.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Marek Szyprowski [Tue, 18 May 2010 10:38:45 +0000 (12:38 +0200)]
ARM: S5PC100: Move sdhci helpers from plat-s5pc1xx to mach-s5pc100
Move sdhci helpers from plat-s5pc1xx to mach-s5pc100.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Marek Szyprowski [Mon, 17 May 2010 06:53:13 +0000 (08:53 +0200)]
ARM: S5PV210: add support for s3c-fb driver on Aquila machine
This patch adds required platform definitions to enable s3c-fb
driver. Two framebuffer windows in 480x800x16bpp mode are defined.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Marek Szyprowski [Mon, 17 May 2010 06:53:10 +0000 (08:53 +0200)]
ARM: S5PV210: add Aquila board
Add basic support for Samsung Aquila board. This board is based
on S5PC110 SoC.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Thu, 20 May 2010 05:48:40 +0000 (14:48 +0900)]
ARM: S5PV210: Remove limiting choice of machine to build
The arch/arm/mach-s5pv210/Kconfig had a choice entry
to choose which of the two machines to build, which is
silly since you can easily build more than one machine
at a time.
Remove the choice entry so that both machines and any
future additions can all build in harmony.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Marek Szyprowski [Tue, 18 May 2010 09:30:49 +0000 (11:30 +0200)]
ARM: SMDKC100: remove magic values from uart setup structures
This patch introduces nice defines for the initial values for UART devices
on SMDKC100.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Marek Szyprowski [Tue, 18 May 2010 09:30:48 +0000 (11:30 +0200)]
ARM: SMDKC100: fix frame buffer definitions
The definition of the framebuffer parameters was created when s3c-fb.c
driver was patched to support setting the refresh rate directly (commit
600ce1a0faafeed1ce6bcfd421bc040b941cbbc1). That patch was completely wrong
and was reverted in commit
eb29a5cc0b601c458bae9df2f what breaked the
framebuffer on s5pc100. This patch updates framebuffer definitions to
correct values.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Jongpill Lee [Mon, 17 May 2010 07:56:26 +0000 (16:56 +0900)]
ARM: S5PV210: Add IRQ_EINT interrupt support.
Add support for external interrupts on S5PV210.
Signed-off-by: Jongpill Lee <boyko.lee@samsung.com>
Signed-off-by: Pannaga Bhushan <p.bhushan@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
[ben-linux@fluff.org: Ext => IRQ_EINT in title]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Naveen Krishna Ch [Thu, 20 May 2010 02:39:54 +0000 (11:39 +0900)]
ARM: S5PV210: Add Touchscreen support for S5PV210
This patch adds touchscreen support for S5PV210.
Note: TSADC in S5PV210 support 2 touchscreen interfaces,
Only 1 is implemented as of now.
Signed-off-by: Naveen Krishna Ch <ch.naveen@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
[ben-linux@fluff.org: minor title fix]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Naveen Krishna Ch [Thu, 20 May 2010 02:39:53 +0000 (11:39 +0900)]
ARM: S5P6440: Add Touchscreen support for S5P6440
This patch adds touchscreen support for S5P6440.
Signed-off-by: Naveen Krishna Ch <ch.naveen@samsung.com
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
[ben-linux@fluff.org: minor header fix]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Naveen Krishna Ch [Thu, 20 May 2010 02:39:52 +0000 (11:39 +0900)]
ARM: S3C64XX: Add Touchscreen support for S3C64XX
This patch adds touchscreen support for S3C64XX.
Signed-off-by: Naveen Krishna Ch <ch.naveen@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
[ben-linux@fluff.org: minor title fix]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Wed, 19 May 2010 05:45:01 +0000 (14:45 +0900)]
Input: s3c24xx_ts - depend on SAMSUNG_DEV_TS and update menu entry
Make the driver depend on either ARCH_S3C2410 (as legacy) or the new
device selection of SAMSUNG_DEV_TS.
Change the menuconfig name to reflect this driver is now handling more
devices that just the s3c2410.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Naveen Krishna [Tue, 18 May 2010 11:44:45 +0000 (20:44 +0900)]
Input: s3c24xx_ts - Add FEAT for Samsung touchscreen support
This patch adds a feature bit field in the touchscreen driver for Samsung SoCs.
Which can be used to distinguish the TSADC module features.
Signed-off-by: Naveen Krishna Ch <ch.naveen@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
[ben-linux@fluff.org: minor fix to title]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Naveen Krishna [Tue, 18 May 2010 11:44:38 +0000 (20:44 +0900)]
Input: s3c24xx_ts - Implement generic GPIO configuration callback
This patch implements generic GPIO configuration function in Samsung
touchscreen driver. And makes the touchscreen driver s3c24xx-ts.c
generic to all the Samsung SoCs.
Signed-off-by: Naveen Krishna Ch <ch.naveen@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
[ben-linux@fluff.org: fixed title ]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Ben Dooks [Wed, 19 May 2010 05:36:28 +0000 (14:36 +0900)]
ARM: SAMSUNG: Move s3c64xx dev-ts.c to plat-samsung and rename configuration
Move the arch/arm/mach-s3c64xx/dev-ts.c file to arch/arm/plat-samsung and
rename the Kconfig entry appropriately.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Naveen Krishna [Tue, 18 May 2010 11:44:27 +0000 (20:44 +0900)]
ARM: SAMSUNG: Implements cfg_gpio function for Samsung touchscreen
This patch implements cfg_gpio function for Samsung touchscreen.
And also modifies the H1940 machine respectively.
Signed-off-by: Naveen Krishna Ch <ch.naveen@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Maurus Cuelenaere [Tue, 4 May 2010 11:12:44 +0000 (13:12 +0200)]
ARM: S3C64XX: Add touchscreen platform device definition
This patch adds the touchscreen platform device definition for S3C64XX boards.
Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Maurus Cuelenaere [Tue, 4 May 2010 11:12:41 +0000 (13:12 +0200)]
ARM: SAMSUNG: Move mach/ts.h to plat/ts.h
This moves mach-s3c2410/include/mach/ts.h to plat-samsung/include/plat/ts.h in
order to prepare for s3c64xx support in the touchscreen driver.
Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Marek Szyprowski [Tue, 18 May 2010 10:38:44 +0000 (12:38 +0200)]
ARM: S5PC100: Move i2c helpers from plat-s5pc1xx to mach-s5pc100
Move i2c helpers from plat-s5pc1xx to mach-s5pc100.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Marek Szyprowski [Tue, 18 May 2010 10:38:43 +0000 (12:38 +0200)]
ARM: S5PC100: Move frame buffer helpers from plat-s5pc1xx to mach-s5pc100
Move frame buffer helpers from plat-s5pc1xx to mach-s5pc100.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Marek Szyprowski [Tue, 18 May 2010 10:38:42 +0000 (12:38 +0200)]
ARM: S5PC100: gpio.h cleanup
This patch renames gpio related registers from s5pc1xx to s5pc100 to
better match the plat-s5p framework style. GPIO_MP* defines now used
anywhere thus has been removed.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Marek Szyprowski [Tue, 18 May 2010 10:38:41 +0000 (12:38 +0200)]
ARM: S5PC100: Move gpio support from plat-s5pc1xx to mach-s5pc100
Move gpio-lib support from plat-s5pc1xx to mach-s5pc100. Only basic gpio
functionality is now supported. Gpio interrupts are disabled temporarly
and will be added later.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Marek Szyprowski [Tue, 18 May 2010 10:38:40 +0000 (12:38 +0200)]
ARM: S5PC100: Use common functions for gpiolib implementation
GPIOlib helpers from plat-samsung already have functions for accessing
4bit gpio banks. This patch removes the duplicated functions from
plat-s5pc1xx/gpiolib.c.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Marek Szyprowski [Tue, 18 May 2010 10:38:39 +0000 (12:38 +0200)]
drivers: serial: S5PC100 serial driver cleanup
Remove unnecessary Kconfig entry. S5PC100 has exactly the same driver as
S3C6400/S3C6410/S5P6440.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Thomas Abraham [Fri, 14 May 2010 07:27:28 +0000 (16:27 +0900)]
ARM: S5PC100: Pre-requisite clock patch for plat-s5pc1xx to plat-s5p move
This is a pre-requisite clock patch for the plat-s5pc1xx to plat-s5p
movement. The patches that perform the movement of the code from
plat-s5pc1xx to plat-s5p (and mach-s5pc100) should also enable the
build for the mach-s5pc100/clock.c code.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Marek Szyprowski [Tue, 18 May 2010 10:23:35 +0000 (12:23 +0200)]
ARM: SAMSUNG: Copy common I2C0 device helpers to machine directories
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Marek Szyprowski [Tue, 18 May 2010 10:23:36 +0000 (12:23 +0200)]
ARM: SAMSUNG: move driver strength gpio configuration helper to common dir
Driver strength parameter can be changed not only on S5PC100 but also
on S5PV210/S5PC110 platforms, so move the helper functions to the common
plat-samsung directory.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Wed, 19 May 2010 09:07:25 +0000 (18:07 +0900)]
ARM: Merge for-2635/samsung-rtc
Merge branch 'for-2635/samsung-rtc' into for-linus/samsung2
Conflicts:
arch/arm/mach-s3c64xx/include/mach/map.h
arch/arm/plat-samsung/Kconfig
arch/arm/plat-samsung/Makefile
Ben Dooks [Wed, 19 May 2010 09:05:42 +0000 (18:05 +0900)]
ARM: Merge for-2635/samsung-ts
Merge branch 'for-2635/samsung-ts' into for-linus/samsung2
Ben Dooks [Wed, 19 May 2010 09:05:33 +0000 (18:05 +0900)]
ARM: Merge for-2635/s5p-audio
Merge branch 'for-2635/s5p-audio' into for-linus/samsung2
Ben Dooks [Wed, 19 May 2010 09:05:15 +0000 (18:05 +0900)]
ARM: Merge for-2635/s5p-dma
Merge branch 'for-2635/s5p-dma' into for-linus/samsung2
Conflicts:
arch/arm/mach-s5pv210/Makefile
Ben Dooks [Wed, 19 May 2010 09:04:11 +0000 (18:04 +0900)]
ARM: Merge for-2635/fb-updates1
Merge branch 'for-2635/fb-updates1' into for-linus/samsung2
Ben Dooks [Wed, 19 May 2010 09:04:10 +0000 (18:04 +0900)]
ARM: Merge for-2635/s5pv210-clock
Merge branch 'for-2635/s5pv210-clock' into for-linus/samsung2
Ben Dooks [Wed, 19 May 2010 09:04:09 +0000 (18:04 +0900)]
ARM: Merge for-2635/s5p6440-clock
Merge branch 'for-2635/s5p6440-clock' into for-linus/samsung2
Ben Dooks [Wed, 19 May 2010 09:04:09 +0000 (18:04 +0900)]
ARM: Merge for-2635/s3c6410-clock
Merge branch 'for-2635/s3c6410-clock' into for-linus/samsung2
Ben Dooks [Wed, 19 May 2010 09:04:08 +0000 (18:04 +0900)]
ARM: Merge for-2635/gpio2
Merge branch 'for-2635/gpio2' into for-linus/samsung2
Ben Dooks [Wed, 19 May 2010 09:04:07 +0000 (18:04 +0900)]
ARM: Merge for-2635/rx1950
Merge branch 'for-2635/rx1950' into for-linus/samsung2
Ben Dooks [Wed, 19 May 2010 09:04:06 +0000 (18:04 +0900)]
ARM: Merge for-2635/acer-n35
Merge branch 'for-2635/acer-n35' into for-linus/samsung2
Ben Dooks [Wed, 19 May 2010 09:04:06 +0000 (18:04 +0900)]
ARM: Merge for-2635/samsung-clock
Merge branch 'for-2635/samsung-clock' into for-linus/samsung2
Ben Dooks [Wed, 19 May 2010 09:04:05 +0000 (18:04 +0900)]
ARM: Merge for-2635/samsung-hwmon
Merge branch 'for-2635/samsung-hwmon' into for-linus/samsung2
Ben Dooks [Wed, 19 May 2010 09:04:04 +0000 (18:04 +0900)]
ARM: Merge for-2635/samsung-dma
Merge branch 'for-2635/samsung-dma' into for-linus/samsung2
Ben Dooks [Wed, 19 May 2010 09:04:03 +0000 (18:04 +0900)]
ARM: Merge for-2635/s5p-general
Merge branch 'for-2635/s5p-general' into for-linus/samsung2
Ben Dooks [Wed, 19 May 2010 09:04:03 +0000 (18:04 +0900)]
ARM: Merge for-2635/s3c24xx-general
Merge branch 'for-2635/s3c24xx-general' into for-linus/samsung2
Pannaga Bhushan [Wed, 19 May 2010 08:25:32 +0000 (17:25 +0900)]
ARM: S5PV210: Add GPIOlib support
This patch adds GPIOlib support for S5PV210.
Signed-off-by: Pannaga Bhushan <p.bhushan@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Marek Szyprowski [Fri, 14 May 2010 06:18:52 +0000 (08:18 +0200)]
ARM: SAMSUNGy: fix broken timer irq base
Timer interrupts range was defined as 43-47, what overlaps with VIC0 range
(32-64). This was caused probably by a typo while the common interrupts
definition was refactored. This patch moves timer interrupt range to safe
area of 11-15 (just before uart range).
This fixes the commit
87aef30eb3c5dac0491c83fe3b90bc61f1df24ec
("ARM: S5P: Change S5P_TIMER_IRQ based to 11 for SAMSUNG S5P series.")
which meant to move these into the old (and previously reserved)
ISA space.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
[ben-linux@fluff.org: update description]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Jassi Brar [Tue, 18 May 2010 07:03:07 +0000 (16:03 +0900)]
ARM: SMDK6440: Add audio devices on board
Add audio platform devices on the smdk by default.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Jassi Brar [Tue, 18 May 2010 07:03:02 +0000 (16:03 +0900)]
ARM: S5P6440: Add audio platform devices
Define platform devices for all audio devices found on S5P6440
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Jassi Brar [Tue, 18 May 2010 07:02:58 +0000 (16:02 +0900)]
ARM: SMDK6442: Add audio devices on board
Add audio platform devices on the smdk by default.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Jassi Brar [Tue, 18 May 2010 07:02:50 +0000 (16:02 +0900)]
ARM: S5P6442: Add audio platform devices
Define platform devices for all audio devices found on S5P6442
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Jassi Brar [Tue, 18 May 2010 07:02:35 +0000 (16:02 +0900)]
ARM: SMDKC110: Add audio devices on board
Add audio platform devices on the smdk by default.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Jassi Brar [Tue, 18 May 2010 07:02:30 +0000 (16:02 +0900)]
ARM: SMDKV210: Add audio devices on board
Add audio platform devices on the smdk by default.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Jassi Brar [Tue, 18 May 2010 07:02:26 +0000 (16:02 +0900)]
ARM: S5PV210: Add audio platform devices
Define platform devices for all audio devices found on S5PV210
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Tue, 18 May 2010 10:07:05 +0000 (19:07 +0900)]
ARM: SAMSUNG: Fix additional increment when running through gpios
The pm-gpio.c code was incrementing the gpio_nr from the nr_gpios
field and the bank-bank offset inside the loop, and also in the
for() loop with a ++.
Remove the ++, as the number is already at the next GPIO, thus
ensuring that we don't skip a gpio bank by accident.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Mon, 17 May 2010 06:12:33 +0000 (15:12 +0900)]
ARM: S3C24XX: Add note on GPIO bank sizes
Add a table for the GPIO bank sizes for each SoC
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Mon, 17 May 2010 05:53:48 +0000 (14:53 +0900)]
ARM: S3C24XX: Remove macros mapping GPIO number to base
As part of the cleanup, remove the old macros mapping GPIO numbers
to the base of the register now we have gpiolib to manage the GPIO
mappings for us.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Mon, 17 May 2010 05:28:44 +0000 (14:28 +0900)]
ARM: S3C24XX: Update missed gpio calls to use gpiolib
Update a couple of S3C24XX and S3C2412 files that are still
using the GPIO number to register mapping calls to get the
s3c_gpio_chip and use the base field from that.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Mon, 17 May 2010 05:13:16 +0000 (14:13 +0900)]
ARM: S3C24XX: Start cleanup of GPIO numbering
Start cleaning up the numbering of GPIO banks by removing the old
bank start definitions currently being used by some of the header
files.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Vasily Khoruzhick [Wed, 12 May 2010 07:22:41 +0000 (10:22 +0300)]
ARM: S3C244X: fix gpiolib port J support
Increase GPIOs number for S3C244X, and make S3C_GPIO_END
point to BANKJ end, otherwise gpiolib refuses to register
BANKJ
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
[ben-linux@fluff.org: Move pm fix to new patch]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Mon, 3 May 2010 06:29:44 +0000 (15:29 +0900)]
ARM: SMDK2416: Add support for framebuffer device and ensure correct setup
Add support for the LCD display on the SMDJK2416, and correctly name the
framebuffer device.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Thu, 13 May 2010 05:44:50 +0000 (14:44 +0900)]
ARM: SAMSUNG: Set S3C_FB_MAX_WIN in <plat/fb.h>
Move the S3C_FB_MAX_WIN to the platform data to avoid
having to include the registers with the platform data.
Set S3C_FB_MAX_WIN to 5, which is the maximum that any
of the current hardware can do and the cost of having
it set to this for all is minimal (at least for the
platform data case), then always leave this as the maximum
for the systems supported.
Also remove the inclusion of <mach/regs-fb.h> from
the device definition in arch/arm/plat-samsung
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Fri, 30 Apr 2010 10:34:25 +0000 (19:34 +0900)]
ARM: S3C2443: Fix definition of LCD clock bit
Fix the definition of the LCD clock bit, it is the TFT display
controller on bit 9, not the older STN on bit 10.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Ben Dooks [Fri, 30 Apr 2010 10:08:38 +0000 (19:08 +0900)]
ARM: S3C2443: Add initial defines for framebuffer support
Add the necessary defines to get the s3c-fb device to compile for
s3c2443.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
This page took 0.042922 seconds and 5 git commands to generate.