Takashi Iwai [Mon, 28 Mar 2011 10:05:31 +0000 (12:05 +0200)]
ALSA: hda - Fix pin-config of Gigabyte mobo
Use pin-fix instead of the static quirk for Gigabyte mobos 1458:a002.
Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=677256
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Linus Torvalds [Mon, 28 Mar 2011 03:35:07 +0000 (20:35 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
ALSA: Fix yet another race in disconnection
ALSA: asihpi - Update verbose debug print macros
ALSA: asihpi - Improve non-busmaster adapter operation
ALSA: asihpi - Support single-rate no-SRC cards
ALSA: HDA: New
AD1984A model for Dell Precision R5500
ALSA: vmalloc buffers should use normal mmap
ALSA: hda - Fix SPDIF out regression on ALC889
ALSA: usb-audio - Support for Boss JS-8 Jam Station
ALSA: usb-audio: add Cakewalk UM-1G support
sound/oss/opl3: validate voice and channel indexes
sound/oss: remove offset from load_patch callbacks
Linus Torvalds [Mon, 28 Mar 2011 03:07:01 +0000 (20:07 -0700)]
Merge branch 'for-next' of git://git./linux/kernel/git/sameo/mfd-2.6
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6:
mfd: Clean up max8997 IRQ namespace
mfd: Fold irq_set_chip/irq_set_handler
mfd: Cleanup irq namespace
mfd: twl6030: Cleanup interrupt handling
mfd: twl4030: Cleanup interrupt handling
mfd: mx8925: Remove irq_desc leftovers
mfd: htc-i2cpld: Cleanup interrupt handling
mfd: htc-egpio: Cleanup interrupt handling
mfd: ezx-pcap: Remvove open coded irq handling
mfd: 88pm860x: Remove unused irq_desc leftovers
mfd: asic3: Cleanup irq handling
mfd: Select MFD_CORE if TPS6105X driver is configured
mfd: Add MODULE_DEVICE_TABLE to rdc321x-southbridge
mfd: Add MAX8997/8966 IRQ control
mfd: Constify i2c_device_id tables
mfd: OLPC: Clean up names to match what OLPC actually uses
mfd: Add mfd_clone_cell(), convert cs5535-mfd/olpc-xo1 to it
Linus Torvalds [Mon, 28 Mar 2011 03:03:39 +0000 (20:03 -0700)]
Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/staging
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging:
hwmon: (pmbus) Fix temperature limit register access
Linus Torvalds [Mon, 28 Mar 2011 03:03:12 +0000 (20:03 -0700)]
Merge branch 'omap-fixes-for-linus' of git://git./linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
hwspinlock: depend on OMAP4
ARM: OMAP2+: Fix warnings for GPMC interrupt
OMAP4: PandaBoard: remove unused power regulators
arm: mach-omap2: omap_l3_smx: fix irq handler setup
arm: mach-omap2: devices: fix omap3_l3_init() return value
Linus Torvalds [Mon, 28 Mar 2011 03:02:45 +0000 (20:02 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
staging: Fix bdops->check_events() misconversion in cyasblkdev_block.c
ide: ensure that we re-run the queue handler
Linus Torvalds [Mon, 28 Mar 2011 03:02:07 +0000 (20:02 -0700)]
Merge branch 'for-2.6.39/drivers' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.39/drivers' of git://git.kernel.dk/linux-2.6-block: (122 commits)
cciss: fix lost command issue
drbd: need include for bitops functions declarations
Revert "cciss: Add missing allocation in scsi_cmd_stack_setup and corresponding deallocation"
cciss: fix missed command status value CMD_UNABORTABLE
cciss: remove unnecessary casts
cciss: Mask off error bits of c->busaddr in cmd_special_free when calling pci_free_consistent
cciss: Inform controller we are using 32-bit tags.
cciss: hoist tag masking out of loop
cciss: Add missing allocation in scsi_cmd_stack_setup and corresponding deallocation
cciss: export resettable host attribute
drbd: drop code present under #ifdef which is relevant to 2.6.28 and below
drbd: Fixed handling of read errors on a 'VerifyS' node
drbd: Fixed handling of read errors on a 'VerifyT' node
drbd: Implemented real timeout checking for request processing time
drbd: Remove unused function atodb_endio()
drbd: improve log message if received sector offset exceeds local capacity
drbd: kill dead code
drbd: don't BUG_ON, if bio_add_page of a single page to an empty bio fails
drbd: Removed left over, now wrong comments
drbd: serialize admin requests for new verify run with pending bitmap io
...
Linus Torvalds [Mon, 28 Mar 2011 02:46:59 +0000 (19:46 -0700)]
Merge branch 'docs-next' of git://git.lwn.net/linux-2.6
* 'docs-next' of git://git.lwn.net/linux-2.6:
docs: update the development process document
docs: fix dev_debug() braino in dynamic-debug-howto.txt
Linus Torvalds [Mon, 28 Mar 2011 02:42:12 +0000 (19:42 -0700)]
Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/jdelvare/staging
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
hwmon: (f71882fg) Add support for the
F71889A
hwmon: (f71882fg) Add support for the
F81865F
hwmon: (f71882fg) Document all supported devices
hwmon: (f71882fg) Per-chip fan/temperature input count tables
hwmon: (f71882fg) Secure chip property definition arrays
Linus Torvalds [Mon, 28 Mar 2011 02:40:56 +0000 (19:40 -0700)]
Merge branch 'for-linus-1' of git://git.infradead.org/mtd-2.6
* 'for-linus-1' of git://git.infradead.org/mtd-2.6: (49 commits)
mtd: mtdswap: fix compilation warning
mtdswap: kill strict error handling option
mtd: nand: enable software BCH ECC in nand simulator
mtd: nand: add software BCH ECC support
mtd: fix printf format warnings, mostly lack of %zd for size_t, in mtdswap
mtd: sm_rtl: check kmalloc return value
mtd: cfi: add support for AMIC flashes (e.g. A29L160AT)
lib: add shared BCH ECC library
mtd: mxc_nand: fix OOB corruption when page size > 2KiB
mtd: DaVinci: Removed header file that is not required
mtd: pxa3xx_nand: clean the keep configure code
mtd: pxa3xx_nand: mtd scan id process could be defined by driver itself
mtd: pxa3xx_nand: unify prepare command
mtd: pxa3xx_nand: discard wait_for_event,write_cmd,__readid function
mtd: pxa3xx_nand: rework irq logic
mtd: pxa3xx_nand: make scan procedure more clear
mtd: speedtest: fix integer overflow
mtd: mxc_nand: fix read past buffer end
mtd: omap3: nand: report corrected ecc errors
jffs2: remove a trailing white space in commentaries
...
Stephen Rothwell [Sat, 26 Mar 2011 06:22:04 +0000 (17:22 +1100)]
apm: orphan the driver
I no longer have access to any hardware that uses APM and have not
provided real maintenance for several years. Hopefully someone with the
hardware or energy will step forward if the driver is to be kept.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Richard Weinberger [Sat, 26 Mar 2011 19:48:57 +0000 (20:48 +0100)]
um: Add myself as co-maintainer
Signed-off-by: Richard Weinberger <richard@nod.at>
Acked-and-appreciated-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Sat, 26 Mar 2011 20:27:54 +0000 (13:27 -0700)]
docbook: fix rapidio warning
Fix fsl_rio.c kernel-doc warning: no exported symbols as
requested by !E are found:
Warning(arch/powerpc/sysdev/fsl_rio.c): no structured comments found
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Sat, 26 Mar 2011 20:28:00 +0000 (13:28 -0700)]
docbook: fix broken media build
DocBook/v4l/ no longer has any *.png files, so the 'cp' command fails,
breaking the build. Drop the *.png cp.
cp: cannot stat `linux-2.6.38-git18/Documentation/DocBook/v4l/*.png': No such file or directory
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Sat, 26 Mar 2011 20:27:47 +0000 (13:27 -0700)]
fs: fix inode.c kernel-doc warning
Fix inode.c kernel-doc fatal error: 2 comment sections have the same name:
Error(fs/inode.c:1171): duplicate section name 'Note'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Sat, 26 Mar 2011 20:27:41 +0000 (13:27 -0700)]
ipc: fix util.c kernel-doc warnings
Fix ipc/util.c kernel-doc warnings:
Warning(ipc/util.c:336): No description found for parameter 'ns'
Warning(ipc/util.c:620): No description found for parameter 'ns'
Warning(ipc/util.c:790): No description found for parameter 'ns'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Reviewed-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Sat, 26 Mar 2011 20:27:01 +0000 (13:27 -0700)]
mm: fix memory.c incorrect kernel-doc
Fix mm/memory.c incorrect kernel-doc function notation:
Warning(mm/memory.c:3718): Cannot understand * @access_remote_vm - access another process' address space
on line 3718 - I thought it was a doc line
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Christoph Lameter [Sun, 27 Mar 2011 01:57:18 +0000 (20:57 -0500)]
percpu: Omit segment prefix in the UP case for cmpxchg_double
Omit the segment prefix in the UP case. GS is not used then
and we will generate segfaults if cmpxchg16b is used otherwise.
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 28 Mar 2011 02:09:29 +0000 (19:09 -0700)]
proc: fix oops on invalid /proc/<pid>/maps access
When m_start returns an error, the seq_file logic will still call m_stop
with that error entry, so we'd better make sure that we check it before
using it as a vma.
Introduced by commit
ec6fd8a4355c ("report errors in /proc/*/*map*
sanely"), which replaced NULL with various ERR_PTR() cases.
(On ia64, you happen to get a unaligned fault instead of a page fault,
since the address used is generally some random error code like -EPERM)
Reported-by: Anca Emanuel <anca.emanuel@gmail.com>
Reported-by: Tony Luck <tony.luck@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Américo Wang <xiyou.wangcong@gmail.com>
Cc: Stephen Wilson <wilsons@start.ca>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Samuel Ortiz [Fri, 25 Mar 2011 16:56:02 +0000 (17:56 +0100)]
mfd: Clean up max8997 IRQ namespace
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Thomas Gleixner [Fri, 25 Mar 2011 11:12:35 +0000 (11:12 +0000)]
mfd: Fold irq_set_chip/irq_set_handler
Use the combined irq_set_chip_and_handler() function
instead. Converted with coccinelle.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Thomas Gleixner [Fri, 25 Mar 2011 11:12:32 +0000 (11:12 +0000)]
mfd: Cleanup irq namespace
Converted with coccinelle.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Thomas Gleixner [Fri, 25 Mar 2011 11:12:31 +0000 (11:12 +0000)]
mfd: twl6030: Cleanup interrupt handling
irq_desc checking in the interrupt demux routine is totally
pointless. The driver sets those lines up, so that cant go away
magically.
Remove the open coded handler magic and use the proper accessor.
This driver needs to be converted to threaded interrupts and buslock.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Thomas Gleixner [Fri, 25 Mar 2011 11:12:31 +0000 (11:12 +0000)]
mfd: twl4030: Cleanup interrupt handling
irq_desc checking in a function which is called with that irq
descriptor locked, is pointless. Equally pointless as the irq desc
check in the interrupt service routine. The driver sets those lines
up, so that cant go away magically.
Remove the open coded handler magic and use the proper accessor.
No need to fiddle with irq_desc in the type setting function. The
original value is in irq_data and the core code stores the new setting
when the return value is 0.
This driver needs to be converted to threaded interrupts and buslock.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Thomas Gleixner [Fri, 25 Mar 2011 11:12:30 +0000 (11:12 +0000)]
mfd: mx8925: Remove irq_desc leftovers
Remove unused code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Thomas Gleixner [Fri, 25 Mar 2011 11:12:29 +0000 (11:12 +0000)]
mfd: htc-i2cpld: Cleanup interrupt handling
Remove the pointless irq_desc check in set_type. This function is
called with that irq descriptor locked. Also remove the write back of
the flow type as the core code does this already when the return value
is 0.
Also store the flow type in the chip data structure, so there is no
need to fiddle in the irq descriptor.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Thomas Gleixner [Fri, 25 Mar 2011 11:12:28 +0000 (11:12 +0000)]
mfd: htc-egpio: Cleanup interrupt handling
Replace the open coded handler call with the prober accessor. Retrieve
the handler data from desc. That avoids a redundant lookup in the
sparse irq case.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Thomas Gleixner [Fri, 25 Mar 2011 11:12:27 +0000 (11:12 +0000)]
mfd: ezx-pcap: Remvove open coded irq handling
There is no point in checking irq_desc here, as it _is_ available. The
driver configured those lines, so they cannot go away.
The home brewn disabled/note_interrupt magic can be removed as well by
adding a irq_disable callback which avoids the lazy disable.
That driver needs to be converted to threaded interrupts.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Thomas Gleixner [Fri, 25 Mar 2011 11:12:27 +0000 (11:12 +0000)]
mfd: 88pm860x: Remove unused irq_desc leftovers
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Thomas Gleixner [Fri, 25 Mar 2011 11:12:26 +0000 (11:12 +0000)]
mfd: asic3: Cleanup irq handling
Remove the open coded access to irq_desc and use the proper wrappers.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Guenter Roeck [Thu, 24 Mar 2011 19:12:47 +0000 (12:12 -0700)]
mfd: Select MFD_CORE if TPS6105X driver is configured
The TPS61050/61052 driver uses MFD core code, yet does not specify the
dependency in Kconfig. If it is the only MFD driver configured, compilation
fails with
ERROR: "mfd_add_devices" [drivers/mfd/tps6105x.ko] undefined!
ERROR: "mfd_remove_devices" [drivers/mfd/tps6105x.ko] undefined!
Fix the problem by adding "select MFD_CORE" to the respective Kconfig entry.
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Axel Lin [Thu, 24 Mar 2011 07:04:53 +0000 (15:04 +0800)]
mfd: Add MODULE_DEVICE_TABLE to rdc321x-southbridge
The device table is required to load modules based on modaliases.
After adding MODULE_DEVICE_TABLE, below entry will be added to modules.pcimap:
rdc321x-southbridge 0x000017f3 0x00006030 0xffffffff 0xffffffff 0x00000000 0x00000000 0x0
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
MyungJoo Ham [Thu, 24 Mar 2011 06:54:45 +0000 (15:54 +0900)]
mfd: Add MAX8997/8966 IRQ control
This patch enables IRQ handling for MAX8997/8966 chips.
Please note that Fuel-Gauge-related IRQs are not implemented in this
initial release. The fuel gauge module in MAX8997 is identical to
MAX17042, which is already in Linux kernel. In order to use the
already-existing MAX17042 driver for fuel gauge module in MAX8997, the
main interrupt handler of MAX8997 should relay related interrupts to
MAX17042 driver. However, in order to do this, we need to modify
MAX17042 driver as well because MAX17042 driver does not have any
interrupt handlers for now. We are not going to implement this in this
initial release as it is not crucial in basic operations of MAX8997.
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Axel Lin [Wed, 23 Mar 2011 12:54:17 +0000 (20:54 +0800)]
mfd: Constify i2c_device_id tables
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Harald Welte <laforge@gnumonks.org>
Cc: Matti Aaltonen <matti.j.aaltonen@nokia.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Daniel Drake [Tue, 22 Mar 2011 20:50:39 +0000 (13:50 -0700)]
mfd: OLPC: Clean up names to match what OLPC actually uses
The cs5535-pms cell doesn't actually need to be cloned, so we can drop that
and simply have the olpc-xo1.c driver use "cs5535-pms" directly.
Also, rename the cs5535-acpi clones to what we actually use for the (currently
out-of-tree) SCI driver. In the process, that fixes a subtle bug in
olpc-xo1.c which broke powerdown on XO-1s.. olpc-xo1-ac-acpi was a typo, not
something that actually existed.
Signed-off-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Andres Salomon [Tue, 22 Mar 2011 02:19:35 +0000 (19:19 -0700)]
mfd: Add mfd_clone_cell(), convert cs5535-mfd/olpc-xo1 to it
Replace mfd_shared_platform_driver_register with mfd_clone_cell. The
former was called by an mfd client, and registered both a platform driver
and device. The latter is called by an mfd driver, and registers only a
platform device.
The downside of this is that mfd drivers need to be modified whenever
new clients are added that share a cell; the upside is that it fits
Linux's driver model better. It's also simpler.
This also converts cs5535-mfd/olpc-xo1 from the old API. cs5535-mfd
now creates the olpc-xo1-{acpi,pms} devices, while olpc-xo1 binds to
them via platform drivers.
Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Tejun Heo [Sat, 26 Mar 2011 18:52:59 +0000 (19:52 +0100)]
staging: Fix bdops->check_events() misconversion in cyasblkdev_block.c
Commit
cafb0bfca1 (staging: Convert to bdops->check_events())
incorrectly set bd->user_disk_0->events while initializing
bd->user_disk_1. Fix it.
The problem was spotted by Milton's suspect code pattern detector.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Jens Axboe [Sat, 26 Mar 2011 18:49:54 +0000 (19:49 +0100)]
ide: ensure that we re-run the queue handler
The conversion to blk_delay_queue() missed parts of IDE.
Add a blk_delay_queue() to ensure that the request handler
gets reinvoked when it needs to.
Note that in all but one place the old plug re-run delay of
3 msecs is used, even though it probably could be shorter
for performance reasons in some of those cases.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Guenter Roeck [Tue, 22 Mar 2011 04:31:00 +0000 (21:31 -0700)]
hwmon: (pmbus) Fix temperature limit register access
Commit
8677011 added auto-update to temperature limit registers.
Unfortunately, the update flag is also used to determine if an attribute
is writable, which results in read-only temperature limit registers.
To fix the problem, pass 'readonly' as separate flag to the function used
to add sensor attributes.
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Hans de Goede [Sat, 26 Mar 2011 09:45:02 +0000 (10:45 +0100)]
hwmon: (f71882fg) Add support for the
F71889A
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Jean Delvare [Sat, 26 Mar 2011 09:45:02 +0000 (10:45 +0100)]
hwmon: (f71882fg) Add support for the
F81865F
Add support for the Fintek
F81865F. It's essentially compatible with
the F71882FG, but has fewer inputs: 7 voltage, 2 temperature and 2 fan
inputs only.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Jean Delvare [Sat, 26 Mar 2011 09:45:02 +0000 (10:45 +0100)]
hwmon: (f71882fg) Document all supported devices
The list of supported devices was not always well documented in all
places. Clarify and list all devices in documentation, Kconfig and
the driver itself.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Jean Delvare [Sat, 26 Mar 2011 09:45:01 +0000 (10:45 +0100)]
hwmon: (f71882fg) Per-chip fan/temperature input count tables
Use tables to list the count of fan and temperature inputs for all
supported chips, almost similar to (but more simple than) what is
already done for voltage inputs. This avoids repeating the same tests
in different functions, and will make it easier to add support for
chips with a different count of fan or temperature inputs.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Jean Delvare [Sat, 26 Mar 2011 09:45:01 +0000 (10:45 +0100)]
hwmon: (f71882fg) Secure chip property definition arrays
Using C99-style array initialization will ensure definitions won't
drift if the chips enum gets new values added.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Linus Torvalds [Sat, 26 Mar 2011 04:07:59 +0000 (21:07 -0700)]
Merge branch 'syscore' of git://git./linux/kernel/git/rafael/suspend-2.6
* 'syscore' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
Introduce ARCH_NO_SYSDEV_OPS config option (v2)
cpufreq: Use syscore_ops for boot CPU suspend/resume (v2)
KVM: Use syscore_ops instead of sysdev class and sysdev
PCI / Intel IOMMU: Use syscore_ops instead of sysdev class and sysdev
timekeeping: Use syscore_ops instead of sysdev class and sysdev
x86: Use syscore_ops instead of sysdev classes and sysdevs
Linus Torvalds [Sat, 26 Mar 2011 04:06:37 +0000 (21:06 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
RDMA/nes: Fix test of uninitialized netdev
Linus Torvalds [Sat, 26 Mar 2011 04:06:13 +0000 (21:06 -0700)]
Merge git://git./linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (55 commits)
[SCSI] tcm_loop: Add multi-fabric Linux/SCSI LLD fabric module
[SCSI] qla4xxx: Use polling mode for disable interrupt mailbox completion
[SCSI] Revert "[SCSI] Retrieve the Caching mode page"
[SCSI] bnx2fc: IO completion not processed due to missed wakeup
[SCSI] qla4xxx: Update driver version to 5.02.00-k6
[SCSI] qla4xxx: masking required bits of add_fw_options during initialization
[SCSI] qla4xxx: added new function qla4xxx_relogin_all_devices
[SCSI] qla4xxx: add support for ql4xsess_recovery_tmo cmd line param
[SCSI] qla4xxx: Add support for ql4xmaxqdepth command line parameter
[SCSI] qla4xxx: cleanup function qla4xxx_process_ddb_changed
[SCSI] qla4xxx: Prevent other port reinitialization during remove_adapter
[SCSI] qla4xxx: remove unused ddb flag DF_NO_RELOGIN
[SCSI] qla4xxx: cleanup DDB relogin logic during initialization
[SCSI] qla4xxx: Do not retry ISP82XX initialization if H/W state is failed
[SCSI] qla4xxx: Do not send mbox command if FW is in failed state
[SCSI] qla4xxx: cleanup qla4xxx_initialize_ddb_list()
[SCSI] ses: add subenclosure support
[SCSI] bnx2fc: Bump version to 1.0.1
[SCSI] bnx2fc: Remove unnecessary module state checks
[SCSI] bnx2fc: Fix MTU issue by using static MTU
...
Linus Torvalds [Sat, 26 Mar 2011 04:04:56 +0000 (21:04 -0700)]
Merge branch 'for_linus' of git://git./linux/kernel/git/jwessel/linux-2.6-kgdb
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
kdb: add usage string of 'per_cpu' command
kgdb,x86_64: fix compile warning found with sparse
kdb: code cleanup to use macro instead of value
kgdboc,kgdbts: strlen() doesn't count the terminator
Linus Torvalds [Sat, 26 Mar 2011 04:02:22 +0000 (21:02 -0700)]
Merge git://git./linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (56 commits)
route: Take the right src and dst addresses in ip_route_newports
ipv4: Fix nexthop caching wrt. scoping.
ipv4: Invalidate nexthop cache nh_saddr more correctly.
net: fix pch_gbe section mismatch warning
ipv4: fix fib metrics
mlx4_en: Removing HW info from ethtool -i report.
net_sched: fix THROTTLED/RUNNING race
drivers/net/a2065.c: Convert release_resource to release_region/release_mem_region
drivers/net/ariadne.c: Convert release_resource to release_region/release_mem_region
bonding: fix rx_handler locking
myri10ge: fix rmmod crash
mlx4_en: updated driver version to 1.5.4.1
mlx4_en: Using blue flame support
mlx4_core: reserve UARs for userspace consumers
mlx4_core: maintain available field in bitmap allocator
mlx4: Add blue flame support for kernel consumers
mlx4_en: Enabling new steering
mlx4: Add support for promiscuous mode in the new steering model.
mlx4: generalization of multicast steering.
mlx4_en: Reporting HW revision in ethtool -i
...
Linus Torvalds [Sat, 26 Mar 2011 04:01:43 +0000 (21:01 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
PCI: Disable ASPM when _OSC control is not granted for PCIe services
PCI: Changing ASPM policy, via /sys, to POWERSAVE could cause NMIs
PCI: PCIe links may not get configured for ASPM under POWERSAVE mode
PCI/ACPI: Report ASPM support to BIOS if not disabled from command line
Linus Torvalds [Sat, 26 Mar 2011 04:00:29 +0000 (21:00 -0700)]
Merge git://git.infradead.org/battery-2.6
* git://git.infradead.org/battery-2.6: (30 commits)
bq20z75: Fix time and temp units
bq20z75: Fix issues with present and suspend
z2_battery: Fix count of properties
s3c_adc_battery: Fix method names when PM not set
z2_battery: Add MODULE_DEVICE_TABLE
ds2782_battery: Add MODULE_DEVICE_TABLE
bq20z75: Add MODULE_DEVICE_TABLE
power_supply: Update power_supply_is_watt_property
bq20z75: Add i2c retry mechanism
bq20z75: Add optional battery detect gpio
twl4030_charger: Make the driver atomic notifier safe
bq27x00: Use single i2c_transfer call for property read
bq27x00: Cleanup bq27x00_i2c_read
bq27x00: Minor cleanups
bq27x00: Give more specific reports on battery status
bq27x00: Add MODULE_DEVICE_TABLE
bq27x00: Add new properties
bq27x00: Poll battery state
bq27x00: Cache battery registers
bq27x00: Add bq27000 support
...
Linus Torvalds [Sat, 26 Mar 2011 03:51:44 +0000 (20:51 -0700)]
Merge git://git./linux/kernel/git/agk/linux-2.6-dm
* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm:
dm stripe: implement merge method
dm mpath: allow table load with no priority groups
dm mpath: fail message ioctl if specified path is not valid
dm ioctl: add flag to wipe buffers for secure data
dm ioctl: prepare for crypt key wiping
dm crypt: wipe keys string immediately after key is set
dm: add flakey target
dm: fix opening log and cow devices for read only tables
Linus Torvalds [Sat, 26 Mar 2011 03:50:12 +0000 (20:50 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: tsc2005 - fix locking issue
Input: tsc2005 - use relative jiffies to schedule the watchdog
Input: tsc2005 - driver should depend on GENERIC_HARDIRQS
Linus Torvalds [Sat, 26 Mar 2011 03:24:05 +0000 (20:24 -0700)]
Merge branch 'irq-cleanup-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'irq-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (23 commits)
genirq: Expand generic show_interrupts()
gpio: Fold irq_set_chip/irq_set_handler to irq_set_chip_and_handler
gpio: Cleanup genirq namespace
arm: ep93xx: Add basic interrupt info
arm/gpio: Remove three copies of broken and racy debug code
xtensa: Use generic show_interrupts()
xtensa: Convert genirq namespace
xtensa: Use generic IRQ Kconfig and set GENERIC_HARDIRQS_NO_DEPRECATED
xtensa: Convert s6000 gpio irq_chip to new functions
xtensa: Convert main irq_chip to new functions
um: Use generic show_interrupts()
um: Convert genirq namespace
m32r: Use generic show_interrupts()
m32r: Convert genirq namespace
h8300: Use generic show_interrupts()
h8300: Convert genirq namespace
avr32: Cleanup eic_set_irq_type()
avr32: Use generic show_interrupts()
avr: Cleanup genirq namespace
avr32: Use generic IRQ config, enable GENERIC_HARDIRQS_NO_DEPRECATED
...
Fix up trivial conflict in drivers/gpio/timbgpio.c
Linus Torvalds [Sat, 26 Mar 2011 00:59:38 +0000 (17:59 -0700)]
Merge branch 'sched-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sched, doc: Update sched-design-CFS.txt
sched: Remove unused 'rq' variable and cpu_rq() call from alloc_fair_sched_group()
sched.h: Fix a typo ("its")
sched: Fix yield_to kernel-doc
Linus Torvalds [Sat, 26 Mar 2011 00:53:09 +0000 (17:53 -0700)]
Merge branch 'perf-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf, x86: Complain louder about BIOSen corrupting CPU/PMU state and continue
perf, x86: P4 PMU - Read proper MSR register to catch unflagged overflows
perf symbols: Look at .dynsym again if .symtab not found
perf build-id: Add quirk to deal with perf.data file format breakage
perf session: Pass evsel in event_ops->sample()
perf: Better fit max unprivileged mlock pages for tools needs
perf_events: Fix stale ->cgrp pointer in update_cgrp_time_from_cpuctx()
perf top: Fix uninitialized 'counter' variable
tracing: Fix set_ftrace_filter probe function display
perf, x86: Fix Intel fixed counters base initialization
Linus Torvalds [Sat, 26 Mar 2011 00:52:53 +0000 (17:52 -0700)]
Merge branch 'irq-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
genirq: Provide locked setter for chip, handler, name
genirq: Provide a lockdep helper
genirq; Remove the last leftovers of the old sparse irq code
Linus Torvalds [Sat, 26 Mar 2011 00:52:22 +0000 (17:52 -0700)]
Merge branch 'core-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
futex: Fix WARN_ON() test for UP
WARN_ON_SMP(): Allow use in if() statements on UP
x86, dumpstack: Use %pB format specifier for stack trace
vsprintf: Introduce %pB format specifier
lockdep: Remove unused 'factor' variable from lockdep_stats_show()
Linus Torvalds [Sat, 26 Mar 2011 00:51:51 +0000 (17:51 -0700)]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: DT: Cleanup namespace and call irq_set_irq_type() unconditional
x86: DT: Fix return condition in irq_create_of_mapping()
x86, mpparse: Move check_slot into CONFIG_X86_IO_APIC context
Linus Torvalds [Sat, 26 Mar 2011 00:47:58 +0000 (17:47 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/gerg/m68knommu
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: merge m68k and m68knommu arch directories
Linus Torvalds [Sat, 26 Mar 2011 00:47:38 +0000 (17:47 -0700)]
Merge git://git./linux/kernel/git/davem/sparc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
sparc32: Fix multiple RTC detections on SUN4D
Linus Torvalds [Sat, 26 Mar 2011 00:47:04 +0000 (17:47 -0700)]
Merge branch 'for-linus' of git://git390.marist.edu/linux-2.6
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
[S390] cmpxchg: implement cmpxchg64()
[S390] xchg/cmpxchg: move to own header file
[S390] ccwgroup_driver: remove duplicate members
[S390] ccw_bus_type: make it static
[S390] ccw_driver: remove duplicate members
[S390] qdio: prevent handling of buffers if count is zero
[S390] setup: register bss section as resource
[S390] setup: simplify setup_resources()
[S390] wire up sys_syncfs
[S390] wire up sys_clock_adjtime
[S390] wire up sys_open_by_handle_at
[S390] wire up sys_name_to_handle_at
[S390] oprofile: disable hw sampling for CONFIG_32BIT
[S390] early: limit savesys cmd string handling
[S390] early: Fix possible overlapping data buffer
Linus Torvalds [Sat, 26 Mar 2011 00:46:34 +0000 (17:46 -0700)]
Merge branch 'upstream' of git://git.linux-mips.org/upstream-linus
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (49 commits)
MIPS: JZ4740: Set nand ecc offsets for the qi_lb60 board
MIPS: JZ4740: qi_lb60: Add gpio-charger device
MIPS: Wire up syncfs(2).
MIPS: Hook up name_to_handle_at, open_by_handle_at and clock_adjtime syscalls.
MIPS: VR41xx: Convert to new irq_chip functions
MIPS: TXx9: Convert to new irq_chip functions
MIPS: SNI: Convert to new irq_chip functions
MIPS: Sibyte: Convert to new irq_chip functions
MIPS: IP32: Convert to new irq_chip functions
MIPS: IP27: Convert to new irq_chip functions
MIPS: IP22/IP28: Convert to new irq_chip functions
MIPS: RB532: Convert to new irq_chip functions
MIPS: PowerTV: Convert to new irq_chip functions
MIPS: PNX8550: Convert to new irq_chip functions
MIPS: PNX83xx: Convert to new irq_chip functions
MIPS: msp71xx: Convert to new irq_chip functions
MIPS: Loongson: Convert to new irq_chip functions
MIPS: Use generic show_interrupts()
MIPS: SMTC: Cleanup the hook mess and use irq_data
MIPS: SMTC: Use irq_data in smtc_forward_irq()
...
Xiaotian Feng [Fri, 25 Mar 2011 08:57:01 +0000 (01:57 -0700)]
ipcns: fix use after free in free_ipc_ns()
commit
b515498 ("userns: add a user namespace owner of ipc ns") added a
user namespace owner of ipc ns, but it also introduced a use after free in
free_ipc_ns().
Signed-off-by: Xiaotian Feng <dfeng@redhat.com>
Acked-by: "Serge E. Hallyn" <serge.hallyn@canonical.com>
Acked-by: David Howells <dhowells@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Daniel Lezcano <daniel.lezcano@free.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rakib Mullick [Fri, 25 Mar 2011 08:57:01 +0000 (01:57 -0700)]
codafs: fix build break when CONFIG_PROC_SYSCTL=n
Commit
0bc825d240ab ("codafs: fix compile warning when CONFIG_SYSCTL=n")
introduces build breakage, when CONFIG_PROC_SYSCTL=n and
CONFIG_CODA_FS=y:
fs/built-in.o: In function `init_coda':
psdev.c:(.init.text+0xc02): undefined reference to `coda_sysctl_init'
psdev.c:(.init.text+0xc7c): undefined reference to `coda_sysctl_clean'
fs/built-in.o: In function `exit_coda':
psdev.c:(.exit.text+0xa9): undefined reference to `coda_sysctl_clean'
make: *** [.tmp_vmlinux1] Error 1
Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Reported-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Maxim Levitsky [Fri, 25 Mar 2011 08:56:59 +0000 (01:56 -0700)]
memstick: add driver for Ricoh R5C592 card reader
Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Acked-by: Alex Dubov <oakad@yahoo.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Namhyung Kim [Mon, 15 Mar 2010 12:28:00 +0000 (07:28 -0500)]
kdb: add usage string of 'per_cpu' command
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Jason Wessel [Mon, 15 Mar 2010 12:28:00 +0000 (07:28 -0500)]
kgdb,x86_64: fix compile warning found with sparse
Fix sparse warning:
arch/x86/kernel/kgdb.c:123:9: warning: switch with no cases
Reported-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Jovi Zhang [Mon, 15 Mar 2010 12:28:00 +0000 (07:28 -0500)]
kdb: code cleanup to use macro instead of value
It's better to use macro KDB_BASE_CMD_MAX instead of 50
Signed-off-by: Jovi Zhang <bookjovi@gmail.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Dan Carpenter [Mon, 15 Mar 2010 12:28:00 +0000 (07:28 -0500)]
kgdboc,kgdbts: strlen() doesn't count the terminator
This is an off by one because strlen() doesn't count the null
terminator. We strcpy() these strings into an array of size
MAX_CONFIG_LEN.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Jonathan Corbet [Fri, 25 Mar 2011 18:17:53 +0000 (12:17 -0600)]
docs: update the development process document
Here's a set of changes updating Documentation/development-process. I have
update kernel releases and relevant statistics, added information for a
couple of tools, zapped some trailing white space, and generally tried to
make it more closely match the current state of affairs.
[Typo fixes from Joe Perches and Nicolas Kaiser incorporated]
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Acked-by: Greg KH <greg@kroah.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Takashi Iwai [Thu, 24 Mar 2011 08:50:15 +0000 (09:50 +0100)]
ALSA: Fix yet another race in disconnection
This patch fixes a race between snd_card_file_remove() and
snd_card_disconnect(). When the card is added to shutdown_files list
in snd_card_disconnect(), but it's freed in snd_card_file_remove() at
the same time, the shutdown_files list gets corrupted. The list member
must be freed in snd_card_file_remove() as well.
Reported-and-tested-by: Russ Dill <russ.dill@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Lars-Peter Clausen [Tue, 8 Feb 2011 02:43:54 +0000 (03:43 +0100)]
MIPS: JZ4740: Set nand ecc offsets for the qi_lb60 board
The jz4740 nand driver now requires that the ecc offsets are set.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/2058/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Lars-Peter Clausen [Tue, 8 Feb 2011 02:43:53 +0000 (03:43 +0100)]
MIPS: JZ4740: qi_lb60: Add gpio-charger device
Register the gpio-charger device which reports whether device is currently
charging or not.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/2059/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Fri, 25 Mar 2011 17:45:20 +0000 (18:45 +0100)]
MIPS: Wire up syncfs(2).
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Fri, 18 Mar 2011 17:37:23 +0000 (10:37 -0700)]
MIPS: Hook up name_to_handle_at, open_by_handle_at and clock_adjtime syscalls.
These system calls we recently added.
32-bit ABIs need compat handling for sys_clock_adjtime().
o32 also needs compat handling for sys_open_by_handle_at();
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2165/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Thomas Gleixner [Wed, 23 Mar 2011 21:09:17 +0000 (21:09 +0000)]
MIPS: VR41xx: Convert to new irq_chip functions
And cleanup direct access to irq_desc[].
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2208/
Patchwork: https://patchwork.linux-mips.org/patch/2209/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Thomas Gleixner [Wed, 23 Mar 2011 21:09:16 +0000 (21:09 +0000)]
MIPS: TXx9: Convert to new irq_chip functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2207/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Thomas Gleixner [Wed, 23 Mar 2011 21:09:15 +0000 (21:09 +0000)]
MIPS: SNI: Convert to new irq_chip functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2206/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Thomas Gleixner [Wed, 23 Mar 2011 21:09:14 +0000 (21:09 +0000)]
MIPS: Sibyte: Convert to new irq_chip functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2205/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Thomas Gleixner [Wed, 23 Mar 2011 21:09:13 +0000 (21:09 +0000)]
MIPS: IP32: Convert to new irq_chip functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2204/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Thomas Gleixner [Wed, 23 Mar 2011 21:09:12 +0000 (21:09 +0000)]
MIPS: IP27: Convert to new irq_chip functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2203/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Thomas Gleixner [Wed, 23 Mar 2011 21:09:11 +0000 (21:09 +0000)]
MIPS: IP22/IP28: Convert to new irq_chip functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2202/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Thomas Gleixner [Wed, 23 Mar 2011 21:09:10 +0000 (21:09 +0000)]
MIPS: RB532: Convert to new irq_chip functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2201/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Thomas Gleixner [Wed, 23 Mar 2011 21:09:09 +0000 (21:09 +0000)]
MIPS: PowerTV: Convert to new irq_chip functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2200/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Thomas Gleixner [Wed, 23 Mar 2011 21:09:09 +0000 (21:09 +0000)]
MIPS: PNX8550: Convert to new irq_chip functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2199/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Thomas Gleixner [Wed, 23 Mar 2011 21:09:08 +0000 (21:09 +0000)]
MIPS: PNX83xx: Convert to new irq_chip functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2198/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Thomas Gleixner [Wed, 23 Mar 2011 21:09:06 +0000 (21:09 +0000)]
MIPS: msp71xx: Convert to new irq_chip functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2197/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Thomas Gleixner [Wed, 23 Mar 2011 21:09:06 +0000 (21:09 +0000)]
MIPS: Loongson: Convert to new irq_chip functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2196/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Thomas Gleixner [Wed, 23 Mar 2011 21:09:05 +0000 (21:09 +0000)]
MIPS: Use generic show_interrupts()
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2195/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Thomas Gleixner [Wed, 23 Mar 2011 21:09:04 +0000 (21:09 +0000)]
MIPS: SMTC: Cleanup the hook mess and use irq_data
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2194/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Thomas Gleixner [Wed, 23 Mar 2011 21:09:03 +0000 (21:09 +0000)]
MIPS: SMTC: Use irq_data in smtc_forward_irq()
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2193/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Thomas Gleixner [Wed, 23 Mar 2011 21:09:02 +0000 (21:09 +0000)]
MIPS: TXx9: Convert core to new irq_chip functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2192/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Thomas Gleixner [Wed, 23 Mar 2011 21:09:02 +0000 (21:09 +0000)]
MIPS: irq_cpu: Convert to new irq_chip functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2191/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Thomas Gleixner [Wed, 23 Mar 2011 21:09:01 +0000 (21:09 +0000)]
MIPS: RM9000: Convert to new irq_chip functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2190/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Thomas Gleixner [Wed, 23 Mar 2011 21:09:00 +0000 (21:09 +0000)]
MIPS: rm7000: Convert to new irq_chip functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2189/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Thomas Gleixner [Wed, 23 Mar 2011 21:08:59 +0000 (21:08 +0000)]
MIPS: MSC01: Convert to new irq_chip functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2188/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Thomas Gleixner [Wed, 23 Mar 2011 21:08:59 +0000 (21:08 +0000)]
MIPS: GT641xx: Convert to new irq_chip functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2187/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Thomas Gleixner [Wed, 23 Mar 2011 21:08:58 +0000 (21:08 +0000)]
MIPS: GIC: Convert to new irq_chip functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2186/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Thomas Gleixner [Wed, 23 Mar 2011 21:08:57 +0000 (21:08 +0000)]
MIPS: i8259: Convert to new irq_chip functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2185/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This page took 0.045719 seconds and 5 git commands to generate.