Kevin Hilman [Wed, 9 Sep 2015 23:15:34 +0000 (16:15 -0700)]
Merge tag 'qcom-soc-for-4.3-rc2' of git://codeaurora.org/quic/kernel/agross-msm into next/late
Qualcomm ARM Based SoC Updates for 4.3-rc2
* Fix errant private access in SMEM
* Fix use of correct remote processor ID in SMD transactions
* Correct SMD fBLOCKREADINTR handling
* tag 'qcom-soc-for-4.3-rc2' of git://codeaurora.org/quic/kernel/agross-msm:
soc: qcom: smd: Correct fBLOCKREADINTR handling
soc: qcom: smd: Use correct remote processor ID
soc: qcom: smem: Fix errant private access
devicetree: soc: Add Qualcomm SMD based RPM DT binding
soc: qcom: Driver for the Qualcomm RPM over SMD
soc: qcom: Add Shared Memory Driver
soc: qcom: Add device tree binding for Shared Memory Device
drivers: qcom: Select QCOM_SCM unconditionally for QCOM_PM
soc: qcom: Add Shared Memory Manager driver
Kevin Hilman [Wed, 9 Sep 2015 23:15:19 +0000 (16:15 -0700)]
Merge tag 'qcom-dt-for-4.3-rc2' of git://codeaurora.org/quic/kernel/agross-msm into next/late
Qualcomm ARM Based Device Tree Updates for v4.3-rc2
* Add labels for serial nodes to be used for aliasing and stdout-path
* Add stdout-path for APQ8064 Compulab QS600
* Add stdout-path for APQ8064 Inforce 6410
* Add stdout-path for APQ8074 Dragonboard
* Add stdout-path for APQ8084 Inforce 6540
* Add stdout-path for APQ8084 MTP
* Add stdout-path for IPQ8064 AP148
* Add stdout-path for MSM8660 Surf
* Add stdout-path for MSM8960 CDP
* Add stdout-path for MSM8974 Xperia Honami
* tag 'qcom-dt-for-4.3-rc2' of git://codeaurora.org/quic/kernel/agross-msm: (24 commits)
ARM: dts: qcom: msm8974-sony-xperia-honami: Use stdout-path
ARM: dts: qcom: msm8960-cdp: Use stdout-path
ARM: dts: qcom: msm8660-surf: Use stdout-path
ARM: dts: qcom: ipq8064-ap148: Use stdout-path
ARM: dts: qcom: apq8084-mtp: Use stdout-path
ARM: dts: qcom: apq8084-ifc6540: Use stdout-path
ARM: dts: qcom: apq8074-dragonboard: Use stdout-path
ARM: dts: qcom: apq8064-ifc6410: Use stdout-path
ARM: dts: qcom: apq8064-cm-qs600: Use stdout-path
ARM: dts: qcom: Label serial nodes for aliasing and stdout-path
ARM: dts: qs600: Add real regulators to sdcc
ARM: dts: ifc6410: add real regulators for sdcc nodes.
ARM: dts: apq8064: remove temporary fixed regulator for mmc
ARM: dts: apq8064: fix missing gsbi cell-index
ARM: dts: apq8064: Add DT support for GSBI6 and for UART pin mux
ARM: dts: apq8064: add pm8921 mpp support
ARM: dts: apq8064: Add pm8921 mfd and its gpio node
ARM: dts: msm8974: Add smem reservation and node
ARM: dts: msm8974: Add tcsr mutex node
ARM: dts: qcom: Add ks8851 node for wired ethernet
...
Kevin Hilman [Wed, 9 Sep 2015 23:07:41 +0000 (16:07 -0700)]
Merge branch 'next/defconfig' into next/late
* next/defconfig: (45 commits)
ARM: multi_v7_defconfig: Enable PBIAS regulator
ARM: add TC2 PM support to multi_v7_defconfig
ARM: tegra: Update multi_v7_defconfig
ARM: tegra: Update default configuration
ARM: at91/defconfig: at91_dt: remove ARM_AT91_ETHER
ARM: at91/defconfig: at91_dt: enable DRM hlcdc support
ARM: at91: at91_dt_defconfig: enable ISI and ov2640 support
ARM: multi_v7_defconfig: Enable Allwinner P2WI, PWM, DMA_SUN6I, cryptodev
ARM: sunxi_defconfig: Enable DMA_SUN6I, P2WI, PWM, cryptodev, EXTCON, FHANDLE
ARM: shmobile: Enable fixed voltage regulator in shmobile_defconfig
ARM: multi_v7_defconfig: Select MX6UL and MX7D
ARM: prima2_defconfig: enable build for hwspinlock
ARM: prima2_defconfig: enable build for RTC
ARM: prima2_defconfig: enable build for misc input
ARM: prima2_defconfig: enable build for SiRFSoC SDHC host
ARM: prima2_defconfig: fix the outdated defconfig
ARM: imx_v6_v7_defconfig: Select CONFIG_IKCONFIG_PROC
ARM: defconfig: orion5x: add DT support
ARM: qcom_defconfig: Enable options for KS8851 ethernet
ARM: multi_v7_defconfig: Enable support for PWM Regulators
...
Kishon Vijay Abraham I [Fri, 4 Sep 2015 12:13:15 +0000 (17:43 +0530)]
ARM: multi_v7_defconfig: Enable PBIAS regulator
PBIAS regulator is required for MMC module in OMAP2, OMAP3, OMAP4,
OMAP5 and DRA7 SoCs. Enable it here.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Kevin Hilman [Wed, 9 Sep 2015 22:42:45 +0000 (15:42 -0700)]
Merge branch 'drivers/reset' into next/late
* drivers/reset:
reset: ath79: Fix missing spin_lock_init
reset: Add (devm_)reset_control_get stub functions
reset: reset-zynq: Adding support for Xilinx Zynq reset controller.
docs: dts: Added documentation for Xilinx Zynq Reset Controller bindings.
MIPS: ath79: Add the reset controller to the AR9132 dtsi
reset: Add a driver for the reset controller on the AR71XX/AR9XXX
devicetree: Add bindings for the ATH79 reset controller
reset: socfpga: Update reset-socfpga to read the altr,modrst-offset property
doc: dt: add documentation for lpc1850-rgu reset driver
reset: add driver for lpc18xx rgu
reset: sti: constify of_device_id array
ARM: STi: DT: Move reset controller constants into common location
MAINTAINERS: add include/dt-bindings/reset path to reset controller entry
Kevin Hilman [Wed, 9 Sep 2015 22:41:42 +0000 (15:41 -0700)]
Merge tag 'reset-for-4.3-fixes' of git://git.pengutronix.de/git/pza/linux into drivers/reset
Merge "Reset controller fixes for v4.3" from Philipp Zabel:
Reset controller fixes for v4.3
- added stubs to avoid build breakage in COMPILE_TEST
configurations with RESET_CONTROLLER disabled
- fixed missing spinlock initialization in ath79 driver
* tag 'reset-for-4.3-fixes' of git://git.pengutronix.de/git/pza/linux:
reset: ath79: Fix missing spin_lock_init
reset: Add (devm_)reset_control_get stub functions
Bjorn Andersson [Mon, 24 Aug 2015 20:38:46 +0000 (13:38 -0700)]
soc: qcom: smd: Correct fBLOCKREADINTR handling
fBLOCKREADINTR is masking the notification from the remote and should
hence be cleared while we're waiting the tx fifo to drain. Also change
the reset state to mask the notification, as send is the only use case
where we're interested in it.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Andy Gross <agross@codeaurora.org>
Andy Gross [Wed, 26 Aug 2015 19:42:45 +0000 (14:42 -0500)]
soc: qcom: smd: Use correct remote processor ID
This patch fixes SMEM addressing issues when remote processors need to use
secure SMEM partitions.
Signed-off-by: Andy Gross <agross@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Andy Gross [Wed, 12 Aug 2015 04:48:15 +0000 (23:48 -0500)]
soc: qcom: smem: Fix errant private access
This patch corrects private partition item access. Instead of falling back to
global for instances where we have an actual host and remote partition existing,
return the results of the private lookup.
Signed-off-by: Andy Gross <agross@codeaurora.org>
Andy Gross [Wed, 9 Sep 2015 20:56:35 +0000 (15:56 -0500)]
Merge tag 'qcom-soc-for-4.3' into v4.2-rc2
Qualcomm ARM Based SoC Updates for 4.3
* Add SMEM driver
* Add SMD driver
* Add RPM over SMD driver
* Select QCOM_SCM by default
Stephen Boyd [Tue, 16 Jun 2015 21:31:53 +0000 (14:31 -0700)]
ARM: dts: qcom: msm8974-sony-xperia-honami: Use stdout-path
Use stdout-path so that we don't have to put the console on the
kernel command line.
Cc: Tim Bird <tim.bird@sonymobile.com>
Cc: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Stephen Boyd [Tue, 16 Jun 2015 21:31:52 +0000 (14:31 -0700)]
ARM: dts: qcom: msm8960-cdp: Use stdout-path
Use stdout-path so that we don't have to put the console on the
kernel command line.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Stephen Boyd [Tue, 16 Jun 2015 21:31:51 +0000 (14:31 -0700)]
ARM: dts: qcom: msm8660-surf: Use stdout-path
Use stdout-path so that we don't have to put the console on the
kernel command line.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Stephen Boyd [Tue, 16 Jun 2015 21:31:50 +0000 (14:31 -0700)]
ARM: dts: qcom: ipq8064-ap148: Use stdout-path
Use stdout-path so that we don't have to put the console on the
kernel command line.
Cc: Mathieu Olivari <mathieu@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Stephen Boyd [Tue, 16 Jun 2015 21:31:49 +0000 (14:31 -0700)]
ARM: dts: qcom: apq8084-mtp: Use stdout-path
Use stdout-path so that we don't have to put the console on the
kernel command line.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Stephen Boyd [Tue, 16 Jun 2015 21:31:48 +0000 (14:31 -0700)]
ARM: dts: qcom: apq8084-ifc6540: Use stdout-path
Use stdout-path so that we don't have to put the console on the
kernel command line.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Stephen Boyd [Tue, 16 Jun 2015 21:31:47 +0000 (14:31 -0700)]
ARM: dts: qcom: apq8074-dragonboard: Use stdout-path
Use stdout-path so that we don't have to put the console on the
kernel command line.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Stephen Boyd [Tue, 16 Jun 2015 21:31:46 +0000 (14:31 -0700)]
ARM: dts: qcom: apq8064-ifc6410: Use stdout-path
Use stdout-path so that we don't have to put the console on the
kernel command line.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Stephen Boyd [Tue, 16 Jun 2015 21:31:45 +0000 (14:31 -0700)]
ARM: dts: qcom: apq8064-cm-qs600: Use stdout-path
Use stdout-path so that we don't have to put the console on the
kernel command line.
Cc: Mike Rapoport <mike.rapoport@gmail.com>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Stephen Boyd [Tue, 16 Jun 2015 21:31:44 +0000 (14:31 -0700)]
ARM: dts: qcom: Label serial nodes for aliasing and stdout-path
Add a label to the serial nodes that are being used for the
console.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Andy Gross [Wed, 9 Sep 2015 19:56:32 +0000 (14:56 -0500)]
Merge tag 'qcom-dt-for-4.3' into v4.2-rc2
Qualcomm ARM Based Device Tree Updates for v4.3
* Switch to use pinctrl compatible for GPIOs
* Add RPM regulators for MSM8960
* Add SPI Ethernet support on MSM8960 CDP
* Add SMEM support along with dependencies
* Add PM8921 support for GPIO and MPP
* Fix GSBI cell index
* Switch to use real regulators on APQ8064 w/ SDCC
Axel Lin [Tue, 1 Sep 2015 12:15:10 +0000 (20:15 +0800)]
reset: ath79: Fix missing spin_lock_init
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Alban Bedel <albeu@free.fr>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Axel Lin [Mon, 31 Aug 2015 23:56:38 +0000 (07:56 +0800)]
reset: Add (devm_)reset_control_get stub functions
So the drivers can be compiled with CONFIG_RESET_CONTROLLER disabled.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Olof Johansson [Fri, 21 Aug 2015 01:59:45 +0000 (18:59 -0700)]
Merge tag 'tegra-for-4.3-defconfig' of git://git./linux/kernel/git/tegra/linux into next/defconfig
ARM: tegra: Default configuration updates for v4.3-rc1
Enable the GK20A GPU (via the Nouveau driver) and CPU frequency scaling
on Tegra124.
* tag 'tegra-for-4.3-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Update multi_v7_defconfig
ARM: tegra: Update default configuration
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Fri, 21 Aug 2015 01:39:57 +0000 (18:39 -0700)]
Merge tag 'samsung-defconfig-new' of git://git./linux/kernel/git/kgene/linux-samsung into next/late
Samsung defconfig updates for v4.3
- for exynos_defconfig
: enable SND_SOC_ODROIDX2 and SND_SIMPLE_CARD for
Odroid-XU3 to use max98090 audio codec
: enalbe SENSORS_NTC_THERMISTOR for Peach boards
: enable cpufreq-dt driver with ONDEMAND governor
for Exynos SoCs 3250, 4210, 4212, 4412 and 5250
- for multi_v7_defconfig:
: remove SAMSUNG_USB2PHY and SAMSUNG_USB3PHY are not used now
: enable SENSORS_NTC_THERMISTOR and EXYNOS_ADC for Peach boards
: enable REGULATOR_MAX77802 for Peach boards
* tag 'samsung-defconfig-new' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: exynos_defconfig: Enable cpufreq-dt driver
ARM: multi_v7_defconfig: Enable max77802 regulator
ARM: exynos_defconfig: Enable NTC Thermistors support
ARM: multi_v7_defconfig: Enable NTC Thermistors support
ARM: multi_v7_defconfig: Remove old Samsung USB PHY configs
ARM: exynos_defconfig: Enable CONFIG_SND_SOC_ODROIDX2 for Odroid-XU3
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Fri, 21 Aug 2015 01:38:39 +0000 (18:38 -0700)]
Merge tag 'samsung-late-cpufreq-driver' of git://git./linux/kernel/git/kgene/linux-samsung into next/late
Samsung cpufreq driver updates for v4.3
- remove exynos4 SoCs and exynos5250 specific cpufreq driver support
and unselectable rule for arm-exynos-cpufreq.o because of supporting
generic cpufreq driver for the exynos SoCs
* Note this is depending on tags/samsung-clk-driver, tags/samsung-soc
and tags/samsung-late-dt
* tag 'samsung-late-cpufreq-driver' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
cpufreq: exynos: Remove unselectable rule for arm-exynos-cpufreq.o
cpufreq: exynos: remove Exynos4x12 specific cpufreq driver support
cpufreq: exynos: remove exynos5250 specific cpufreq driver support
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Fri, 21 Aug 2015 01:37:55 +0000 (18:37 -0700)]
Merge tag 'samsung-soc' of git://git./linux/kernel/git/kgene/linux-samsung into next/late
Samsung SoC updates for v4.3
- add compatible string to exynos_cpufreq_matchs to switch for
supporting generic cpufreq driver for exynos3250, 4210, 4212
and 5250 SoCs in mach-exynos/
* tag 'samsung-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: EXYNOS: switch to using generic cpufreq driver for exynos4x12
ARM: EXYNOS: Add exynos3250 compatible to use generic cpufreq driver
ARM: EXYNOS: switch to using generic cpufreq driver for exynos5250
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Fri, 21 Aug 2015 01:35:34 +0000 (18:35 -0700)]
Merge tag 'samsung-late-dt' of git://git./linux/kernel/git/kgene/linux-samsung into next/late
Samsung 2nd DT updates for v4.3
- for exynos3250, 4212, 4412 and 5250
: add CPU OPP and regulator supply property
- for exynos3250
: add CPU cooling binding for exynos3250 boards
- for exynos4 SoCs
: add iommu property to JPEG device
- for exynos4412-odroidu3
: enable SPI1
- for exynos5250-snow
: add SPI CS
- for exynos5422
: add exynos5422-cpus.dtsi to correct cpu order
* Note this branch is depending on tags/samsung-clk-driver
* tag 'samsung-late-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (22 commits)
ARM: dts: add iommu property to JPEG device for exynos4
ARM: dts: enable SPI1 for exynos4412-odroidu3
ARM: dts: Add SPI CS on exynos5250-snow
ARM: dts: Add CPU cooling binding for exynos3250 boards
ARM: dts: add exynos5422-cpus.dtsi to correct cpu order
ARM: dts: add CPU OPP and regulator supply property for exynos4x12
ARM: dts: Add CPU OPP and regulator supply property for exynos3250
ARM: dts: add CPU OPP and regulator supply property for exynos5250
ARM: dts: Extend exynos5420-pinctrl nodes using labels instead of paths
ARM: dts: Include exynos5420-pinctrl after the nodes were defined for exynos5420
ARM: dts: Extend exynos5250-pinctrl nodes using labels instead of paths
ARM: dts: Include exynos5250-pinctrl after the nodes were defined for exynos5250
ARM: dts: Enable thermal-zones for exynos5422-odroidxu3
ARM: dts: Define default thermal-zones for exynos5422
ARM: dts: Enable TMU for exynos5422-odroidxu3
ARM: dts: Add pwm-fan node for exynos5422-odroidxu3
ARM: dts: Use labels for overriding nodes for exynos4210-universal_c210
ARM: dts: Set max17047 over heat and voltage thresholds for exynos4412-trats2
ARM: dts: Enable USB3 regulators for exynos5422-odroidxu3
ARM: dts: Clean up indentation for exynos5410-smdk5410
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Fri, 21 Aug 2015 01:35:02 +0000 (18:35 -0700)]
Merge tag 'samsung-clk-driver' of git://git./linux/kernel/git/kgene/linux-samsung into next/late
Samsung clk driver updates for v4.3
- add cpu clock configuration data and instantiate cpu clock
for exynos3250, 4210, 4412 and 5250 SoCs to support Samsung
specific cpu-clock type
* Note this branch has been provided to clk tree as a topic branch
* tag 'samsung-clk-driver' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
clk: exynos4x12: add cpu clock configuration data and instantiate cpu clock
clk: exynos3250: Add cpu clock configuration data and instaniate cpu clock
clk: exynos5250: add cpu clock configuration data and instantiate cpu clock
Signed-off-by: Olof Johansson <olof@lixom.net>
Nicolas Pitre [Sat, 15 Aug 2015 02:46:25 +0000 (22:46 -0400)]
ARM: add TC2 PM support to multi_v7_defconfig
Without this, the multi_v7_defconfig kernel cannot boot all CPUs
nor do deep cpuidle power saving on a TC2 board.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 18 Aug 2015 20:15:57 +0000 (13:15 -0700)]
Merge tag 'imx-defconfig-4.3' of git://git./linux/kernel/git/shawnguo/linux into next/defconfig
The i.MX defconfig updates for 4.3:
- Enable i.MX6UL SoC build
- Enable powerkey and syscon poweroff support
- Build in multi-channel audio support, including i.MX ASRC and CS42xx8
codec drivers.
- Enable kexec build, HCIUART_H4 and IKCONFIG_PROC support.
* tag 'imx-defconfig-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: Select CONFIG_IKCONFIG_PROC
ARM: imx: imx_v6_v7_defconfig enable imx6ul support
ARM: imx_v6_v7_defconfig: enable powerkey and syscon power off
ARM: imx_v6_v7_defconfig: Select HCIUART_H4
ARM: imx_v6_v7_defconfig: build in audio driver
ARM: imx_v6_v7_defconfig: Enable kexec support
Signed-off-by: Olof Johansson <olof@lixom.net>
Philipp Zabel [Sun, 16 Aug 2015 15:10:20 +0000 (17:10 +0200)]
Merge branch 'reset/ath79' into reset/next
Thierry Reding [Fri, 14 Aug 2015 14:17:52 +0000 (16:17 +0200)]
ARM: tegra: Update multi_v7_defconfig
Add Tegra-specific configuration options to multi_v7_defconfig:
* HDA controller and codec support
* Watchdog support
* Nouveau (for GK20A GPU) support
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tuomas Tynkkynen [Wed, 13 May 2015 14:58:51 +0000 (17:58 +0300)]
ARM: tegra: Update default configuration
* CPU frequency scaling for Tegra124
* Nouveau (for GK20A GPU) support
Signed-off-by: Thierry Reding <treding@nvidia.com>
Bartlomiej Zolnierkiewicz [Tue, 11 Aug 2015 22:41:11 +0000 (07:41 +0900)]
ARM: EXYNOS: switch to using generic cpufreq driver for exynos4x12
The new CPU clock type allows the use of generic CPUfreq driver.
Switch Exynos4x12 to using generic cpufreq driver.
Previously (when exynos-cpufreq driver was used with boost
functionality) ARM_EXYNOS_CPU_FREQ_BOOST_SW config option
(which enabled boost functionality) selected EXYNOS_THERMAL
one. After switching Exynos4x12 platforms to use cpufreq-dt
driver boost support is enabled in the cpufreq-dt driver
itself (because there are turbo OPPs defined in the board's
DTS file). However we still would like to allow enabling
boost support only if thermal support is also enabled for
Exynos platforms. To achieve this make ARCH_EXYNOS config
option select THERMAL and EXYNOS_THERMAL ones.
Please also note that the switch to use the generic cpufreq-dt
driver fixes the minor issue present with the old code (support
for 'boost' mode in the exynos-cpufreq driver was enabled for
all supported SoCs even though 'boost' frequency was provided
only for Exynos4x12 ones).
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Thomas Abraham <thomas.ab@samsung.com>
Cc: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Jonas Rabenstein [Thu, 13 Aug 2015 17:36:14 +0000 (02:36 +0900)]
cpufreq: exynos: Remove unselectable rule for arm-exynos-cpufreq.o
Commit
966f2a71a92d ("cpufreq: exynos: remove Exynos4x12 specific
cpufreq driver support") deleted option ARM_EXYNOS_CPUFREQ but missed
to delete a rule in drivers/cpufreq/Makefile which depends on that
option.
Remove unselectable rule for arm-exynos-cpufreq.o
from drivers/cpufreq/Makefile.
Signed-off-by: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Marek Szyprowski [Thu, 13 Aug 2015 17:29:48 +0000 (02:29 +0900)]
ARM: dts: add iommu property to JPEG device for exynos4
JPEG codec node has been added in parallel to the patch, which
added support for IOMMU to Exynos platform, so JPEG device for
Exynos4 SoCs lacked IOMMU property. This patch fixes this issue.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Alexis Ballier [Thu, 13 Aug 2015 17:27:33 +0000 (02:27 +0900)]
ARM: dts: enable SPI1 for exynos4412-odroidu3
SPI1 is available on IO Port #2 (as depicted on their website)
in PCB Revision 0.5 of Hardkernel Odroid U3 board.
The shield connects a 256KiB spi-nor flash on that bus.
Signed-off-by: Alexis Ballier <aballier@gentoo.org>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Michal Suchanek [Thu, 30 Jul 2015 14:12:43 +0000 (23:12 +0900)]
ARM: dts: Add SPI CS on exynos5250-snow
Although there is only one choice of chipselect it is necessary to
specify it. The driver cannot claim the gpio otherwise.
Signed-off-by: Michal Suchanek <hramrach@gmail.com>
Acked-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Chanwoo Choi [Thu, 30 Jul 2015 14:02:22 +0000 (23:02 +0900)]
ARM: dts: Add CPU cooling binding for exynos3250 boards
This patch add the cooling device to control the overheating issue on
Exynos3250-based Rinato/Monk board.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Chanho Park [Thu, 30 Jul 2015 14:11:00 +0000 (23:11 +0900)]
ARM: dts: add exynos5422-cpus.dtsi to correct cpu order
The odroid-xu3 board which is based on exynos5422 not exynos5800
is booted from cortex-a7 core unlike exynos5800. The odroid-xu3's
cpu order is quite strange. cpu0 and cpu5-7 are cortex-a7 cores and
cpu1-4 are cortex-a15 cores. To correct this mis-odering, I added
exynos5422-cpus.dtsi and reversing cpu orders from exynos5420.
Now, cpu0-3 are cortex-a7 and cpu4-7 are cortex-a15.
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Chanho Park <parkch98@gmail.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Bartlomiej Zolnierkiewicz [Tue, 11 Aug 2015 22:38:45 +0000 (07:38 +0900)]
ARM: dts: add CPU OPP and regulator supply property for exynos4x12
For Exynos4x12 platforms, add CPU operating points (using
opp-v2 bindings) and CPU regulator supply properties for
migrating from Exynos specific cpufreq driver to using
generic cpufreq driver.
Based on the earlier work by Thomas Abraham.
Cc: Doug Anderson <dianders@chromium.org>
Cc: Andreas Faerber <afaerber@suse.de>
Cc: Thomas Abraham <thomas.ab@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Chanwoo Choi [Fri, 24 Jul 2015 03:55:21 +0000 (12:55 +0900)]
ARM: dts: Add CPU OPP and regulator supply property for exynos3250
This patch add CPU operating points which include CPU frequency and
regulator voltage to use generic cpufreq drivers.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Thomas Abraham [Wed, 1 Jul 2015 13:10:36 +0000 (15:10 +0200)]
ARM: dts: add CPU OPP and regulator supply property for exynos5250
For Exynos5250 platforms, add CPU operating points and CPU regulator
supply properties for migrating from Exynos specific cpufreq driver
to using generic cpufreq driver.
Cc: Doug Anderson <dianders@chromium.org>
Cc: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
[b.zolnierkie: split Exynos5250 support from the original patch]
[b.zolnierkie: added CPU regulator supply property for Spring boards]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org>
Tested-by: Javier Martinez Canillas <javier@dowhile0.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Chanwoo Choi [Fri, 24 Jul 2015 03:58:41 +0000 (12:58 +0900)]
ARM: EXYNOS: Add exynos3250 compatible to use generic cpufreq driver
This patch add exynos3250 compatible string to exynos_cpufreq_matches
for supporting generic cpufreq driver on Exynos3250.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Thomas Abraham [Wed, 1 Jul 2015 13:10:37 +0000 (15:10 +0200)]
ARM: EXYNOS: switch to using generic cpufreq driver for exynos5250
The new CPU clock type allows the use of generic CPUfreq driver.
Switch Exynos5250 to using generic cpufreq driver.
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
[b.zolnierkie: split Exynos5250 support from the original patch]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org>
Tested-by: Javier Martinez Canillas <javier@dowhile0.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Bartlomiej Zolnierkiewicz [Tue, 11 Aug 2015 22:44:22 +0000 (07:44 +0900)]
cpufreq: exynos: remove Exynos4x12 specific cpufreq driver support
Exynos4x12 based platforms have switched over to use generic
cpufreq driver for cpufreq functionality. So the Exynos
specific cpufreq support for these platforms can be removed.
Also once Exynos4x12 based platforms support have been removed
the shared exynos-cpufreq driver is no longer needed and can
be deleted.
Based on the earlier work by Thomas Abraham.
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Thomas Abraham <thomas.ab@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Bartlomiej Zolnierkiewicz [Tue, 11 Aug 2015 22:36:47 +0000 (07:36 +0900)]
clk: exynos4x12: add cpu clock configuration data and instantiate cpu clock
With the addition of the new Samsung specific cpu-clock type, the
arm clock can be represented as a cpu-clock type. Add the CPU clock
configuration data and instantiate the CPU clock type for Exynos4x12.
Based on the earlier work by Thomas Abraham.
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Thomas Abraham <thomas.ab@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Tested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Alexandre Belloni [Fri, 31 Jul 2015 17:30:07 +0000 (19:30 +0200)]
ARM: at91/defconfig: at91_dt: remove ARM_AT91_ETHER
CONFIG_ARM_AT91_ETHER doesn't exist anymore, both drivers have been merged
in the macb driver.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Josh Wu [Fri, 31 Jul 2015 17:26:36 +0000 (19:26 +0200)]
ARM: at91/defconfig: at91_dt: enable DRM hlcdc support
This patch adds drm atmel lcdc, simple panel and backlight options.
Signed-off-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Krzysztof Kozlowski [Tue, 11 Aug 2015 22:47:17 +0000 (07:47 +0900)]
ARM: exynos_defconfig: Enable cpufreq-dt driver
With the latest patches the cpufreq-dt can be used on multiple
Exynos SoCs: 3250, 4210, 4212, 4412 and 5250.
Enable it along with default ondemand governor to conserve the energy,
reduce temperature while maintaining acceptable performance.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Javier Martinez Canillas [Thu, 16 Jul 2015 06:39:42 +0000 (08:39 +0200)]
ARM: multi_v7_defconfig: Enable max77802 regulator
The Exynos5420 based Peach Pit and Exynos5800 based Peach Pi Chromebooks
use the Maxim max77802 Power Management IC (PMIC). This PMIC has besides
other devices, a set of regulators that can be controller over I2C.
Commit
f3caa529c6f5 ("ARM: multi_v7_defconfig: Enable max77802 regulator,
rtc and clock drivers") was supposed to enable the config option for the
regulator driver as a module but the final version that landed did not
include this. The commit was modified and the REGULATOR_MAX77802 removed
since it was thought to be useless.
Unfortunately that's not the case for the mentioned reason above so this
patch enables the needed Kconfig option.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
[kgene@kernel.org: fixed ordering according to make savedefconfig]
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Olof Johansson [Thu, 6 Aug 2015 08:12:52 +0000 (10:12 +0200)]
Merge tag 'sunxi-defconfig-for-4.3' of https://git./linux/kernel/git/mripard/linux into next/defconfig
Allwinner defconfig changes for 4.3
Two patches that enable various Allwinner related drivers drivers both in
sunxi_defconfig and in multi_v7_defconfig
* tag 'sunxi-defconfig-for-4.3' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
ARM: multi_v7_defconfig: Enable Allwinner P2WI, PWM, DMA_SUN6I, cryptodev
ARM: sunxi_defconfig: Enable DMA_SUN6I, P2WI, PWM, cryptodev, EXTCON, FHANDLE
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Wed, 5 Aug 2015 09:11:51 +0000 (11:11 +0200)]
Merge tag 'mvebu-config-4.3-2' of git://git.infradead.org/linux-mvebu into next/defconfig
mvebu config changes for v4.3 (part #2)
Improve dt support for orion5x
* tag 'mvebu-config-4.3-2' of git://git.infradead.org/linux-mvebu:
ARM: defconfig: orion5x: add DT support
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Wed, 5 Aug 2015 08:46:31 +0000 (10:46 +0200)]
Merge tag 'qcom-defconfig-for-4.3' of git://codeaurora.org/quic/kernel/agross-msm into next/defconfig
Qualcomm ARM Based defconfig Updates for v4.3
* Enable KS8851 for QCOM SoCs in qcom defconfig
* tag 'qcom-defconfig-for-4.3' of git://codeaurora.org/quic/kernel/agross-msm:
ARM: qcom_defconfig: Enable options for KS8851 ethernet
Signed-off-by: Olof Johansson <olof@lixom.net>
Josh Wu [Thu, 30 Jul 2015 17:18:19 +0000 (19:18 +0200)]
ARM: at91: at91_dt_defconfig: enable ISI and ov2640 support
Add Atmel-isi and ov2640 driver in defconfig
Signed-off-by: Josh Wu <josh.wu@atmel.com>
[nicolas.ferre@atmel.com: make SOC_CAMERA_OV2640 selected as a module]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Wed, 5 Aug 2015 08:35:54 +0000 (10:35 +0200)]
Merge tag 'renesas-defconfig2-for-v4.3' of git://git./linux/kernel/git/horms/renesas into next/defconfig
Second Round of Renesas ARM Based SoC Defconfig Updates for v4.3
* Enable fixed voltage regulator in shmobile_defconfig
* tag 'renesas-defconfig2-for-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: Enable fixed voltage regulator in shmobile_defconfig
Signed-off-by: Olof Johansson <olof@lixom.net>
Moritz Fischer [Fri, 31 Jul 2015 01:13:56 +0000 (18:13 -0700)]
reset: reset-zynq: Adding support for Xilinx Zynq reset controller.
This adds a reset controller driver to control the Xilinx Zynq
AP-SoC's various resets.
Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Moritz Fischer [Fri, 31 Jul 2015 01:13:54 +0000 (18:13 -0700)]
docs: dts: Added documentation for Xilinx Zynq Reset Controller bindings.
Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Alban Bedel [Mon, 3 Aug 2015 17:23:53 +0000 (19:23 +0200)]
MIPS: ath79: Add the reset controller to the AR9132 dtsi
Signed-off-by: Alban Bedel <albeu@free.fr>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Alban Bedel [Mon, 3 Aug 2015 17:23:52 +0000 (19:23 +0200)]
reset: Add a driver for the reset controller on the AR71XX/AR9XXX
The AR71XX/AR9XXX SoC have a simple reset controller with one bit per
reset line.
Signed-off-by: Alban Bedel <albeu@free.fr>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Alban Bedel [Mon, 3 Aug 2015 17:23:51 +0000 (19:23 +0200)]
devicetree: Add bindings for the ATH79 reset controller
Signed-off-by: Alban Bedel <albeu@free.fr>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Dinh Nguyen [Fri, 31 Jul 2015 21:03:10 +0000 (16:03 -0500)]
reset: socfpga: Update reset-socfpga to read the altr,modrst-offset property
In order for the Arria10 to be able to re-use the reset driver for SoCFPGA
Cyclone5/Arria5, we need to read the 'altr,modrst-offset' property from the
device tree entry. The 'altr,modrst-offset' property is the first register
into the reset manager that is used for bringing peripherals out of reset.
The driver assumes a modrst-offset of 0x10 in order to support legacy
Cyclone5/Arria5 hardware.
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Joachim Eastwood [Tue, 5 May 2015 22:10:27 +0000 (00:10 +0200)]
doc: dt: add documentation for lpc1850-rgu reset driver
Add device tree binding documentation for the Reset Generation Unit
(RGU) found on NXP LPC18xx and LPC43xx devies.
This documentation also includes a table which shows the RGU reset
number and the connected peripheral.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Joachim Eastwood [Tue, 5 May 2015 22:10:26 +0000 (00:10 +0200)]
reset: add driver for lpc18xx rgu
Add reset driver for the Reset Generation Unit (RGU) found on NXP
LPC18xx and LPC43xx devies. This reset controller features up to 64
reset lines connected to different blocks and peripheral in the SoC.
Most reset lines on the controller are self clearing except for
those dealing with the Cortex-M0 cores on LPC43xx devices.
This driver also registers a restart handler that can be used to
reset the entire device.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Fabian Frederick [Mon, 16 Mar 2015 19:54:37 +0000 (20:54 +0100)]
reset: sti: constify of_device_id array
of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Acked-by: Maxime Coquelin <maxime.coquelin@st.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Philipp Zabel [Fri, 13 Feb 2015 11:20:49 +0000 (12:20 +0100)]
ARM: STi: DT: Move reset controller constants into common location
By popular vote, the DT binding includes for reset controllers are located
in include/dt-bindings/reset/. Move the STi reset constants in there, too,
to avoid confusion.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Philipp Zabel [Fri, 13 Feb 2015 11:14:40 +0000 (12:14 +0100)]
MAINTAINERS: add include/dt-bindings/reset path to reset controller entry
This is the path for reset definitions to be used in both device tree and
reset controller drivers.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Chen-Yu Tsai [Fri, 31 Jul 2015 14:56:42 +0000 (22:56 +0800)]
ARM: multi_v7_defconfig: Enable Allwinner P2WI, PWM, DMA_SUN6I, cryptodev
Enable drivers for Allwinner P2WI, PWM, cryptodev (Security System) and
sun6i DMA engine. Also enable EXTCON as PHY_SUN4I_USB depends on it.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Chen-Yu Tsai [Fri, 31 Jul 2015 14:56:41 +0000 (22:56 +0800)]
ARM: sunxi_defconfig: Enable DMA_SUN6I, P2WI, PWM, cryptodev, EXTCON, FHANDLE
Enable sun6i DMA engine, sun6i P2WI, PWM, and crypto engine (Security
System) drivers by default. EXTCON is needed by the updated sun4i USB
PHY driver.
While at it, enable FHANDLE, which is needed by systemd and newer
versions of udev. Also enable CGROUPS for systemd.
And get rid of POWER_RESET, as the sun6i power reset driver has been
removed in favor of proper sun6i watchdog support.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Javier Martinez Canillas [Wed, 15 Jul 2015 16:32:45 +0000 (18:32 +0200)]
ARM: exynos_defconfig: Enable NTC Thermistors support
The Exynos5420 Peach Pit and Exynos5800 Peach Pi Chromebooks have
IIO based ADC thermistors. Enable built-in support for its driver.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Javier Martinez Canillas [Wed, 15 Jul 2015 16:32:44 +0000 (18:32 +0200)]
ARM: multi_v7_defconfig: Enable NTC Thermistors support
The Exynos5420 Peach Pit and Exynos5800 Peach Pi Chromebooks have
IIO based ADC thermistors. Enable module support for its driver
and also for the needed Exynos ADC driver.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Javier Martinez Canillas [Wed, 8 Jul 2015 22:40:46 +0000 (15:40 -0700)]
ARM: multi_v7_defconfig: Remove old Samsung USB PHY configs
The old drivers/usb/phy/phy-samsung-usb{2,3} are now deleted since
were replaced by newer drivers that use the Generic PHY framework
but their Kconfig options were left over in multi_v7_defconfig.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Anand Moon [Tue, 9 Jun 2015 04:07:59 +0000 (13:37 +0930)]
ARM: exynos_defconfig: Enable CONFIG_SND_SOC_ODROIDX2 for Odroid-XU3
Enable CONFIG_SND_SOC_ODROIDX2 and CONFIG_SND_SIMPLE_CARD to enable
sound on Odroid-XU3 board using the max98090 audio codec.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Bjorn Andersson [Tue, 28 Jul 2015 03:20:31 +0000 (20:20 -0700)]
devicetree: soc: Add Qualcomm SMD based RPM DT binding
Add binding documentation for the Qualcomm Resource Power Manager (RPM)
using shared memory (Qualcomm SMD) as transport mechanism. This is found
in 8974 and newer based devices.
The binding currently describes the rpm itself and the regulator
subnodes.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Andy Gross <agross@codeaurora.org>
Bjorn Andersson [Tue, 28 Jul 2015 03:20:32 +0000 (20:20 -0700)]
soc: qcom: Driver for the Qualcomm RPM over SMD
Driver for the Resource Power Manager (RPM) found in Qualcomm 8974 based
devices.
The driver exposes resources that child drivers can operate on; to
implementing regulator, clock and bus frequency drivers.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Andy Gross <agross@codeaurora.org>
Bjorn Andersson [Tue, 28 Jul 2015 03:20:30 +0000 (20:20 -0700)]
soc: qcom: Add Shared Memory Driver
This adds the Qualcomm Shared Memory Driver (SMD) providing
communication channels to remote processors, ontop of SMEM.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Andy Gross <agross@codeaurora.org>
Bjorn Andersson [Tue, 28 Jul 2015 03:20:29 +0000 (20:20 -0700)]
soc: qcom: Add device tree binding for Shared Memory Device
Add device tree binding documentation for the Qualcomm Shared Memory
Device, used for communication between the various CPUs in the Qualcomm
SoCs.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Andy Gross <agross@codeaurora.org>
Lina Iyer [Fri, 10 Jul 2015 20:18:00 +0000 (14:18 -0600)]
drivers: qcom: Select QCOM_SCM unconditionally for QCOM_PM
Enable QCOM_SCM for QCOM power management driver
Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Andy Gross <agross@codeaurora.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>
Bjorn Andersson [Fri, 26 Jun 2015 21:50:10 +0000 (14:50 -0700)]
soc: qcom: Add Shared Memory Manager driver
The Shared Memory Manager driver implements an interface for allocating
and accessing items in the memory area shared among all of the
processors in a Qualcomm platform.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Acked-by: Andy Gross <agross@codeaurora.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>
Srinivas Kandagatla [Tue, 28 Jul 2015 08:13:05 +0000 (09:13 +0100)]
ARM: dts: qs600: Add real regulators to sdcc
This patch adds real regulators to sdcc nodes.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>
Srinivas Kandagatla [Tue, 28 Jul 2015 08:12:58 +0000 (09:12 +0100)]
ARM: dts: ifc6410: add real regulators for sdcc nodes.
This patch adds real regulators for all the three sdcc nodes.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>
Srinivas Kandagatla [Tue, 28 Jul 2015 08:12:51 +0000 (09:12 +0100)]
ARM: dts: apq8064: remove temporary fixed regulator for mmc
This patch removes temporary fixed regluator use for mmc.
Board files should use the regulators which are wiredup appropriately.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>
Simon Horman [Wed, 15 Jul 2015 06:42:35 +0000 (15:42 +0900)]
ARM: shmobile: Enable fixed voltage regulator in shmobile_defconfig
This is selected by MACH_MARZEN which is enabled in shmobile_defconfig,
however, MACH_MARZEN is going away along with the board code it enables.
Acked-by: Magnus Damm <damm@opensource.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Srinivas Kandagatla [Mon, 27 Jul 2015 13:52:19 +0000 (14:52 +0100)]
ARM: dts: apq8064: fix missing gsbi cell-index
Without this i2c instance for missing cell-index nodes would fail, fix
it by adding correct cell-index.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>
Pramod Gurav [Mon, 27 Jul 2015 13:52:10 +0000 (14:52 +0100)]
ARM: dts: apq8064: Add DT support for GSBI6 and for UART pin mux
This change adds DT support for GSBI6 and muxes the gpio pins
as UART lines. Also defines a alias for serial port on these lines.
Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com>
[Srinivas Kandagatla]: fix pinctrl location and rename alias correctly
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>
Srinivas Kandagatla [Mon, 27 Jul 2015 13:52:02 +0000 (14:52 +0100)]
ARM: dts: apq8064: add pm8921 mpp support
This patch adds pmic pm8921 mpp gpio controller node.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>
Srinivas Kandagatla [Mon, 27 Jul 2015 13:51:52 +0000 (14:51 +0100)]
ARM: dts: apq8064: Add pm8921 mfd and its gpio node
This patch adds pmic gpio node to the device tree, this node is
necessary for devices like wlan to control reset gpio.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>
Fabio Estevam [Mon, 27 Jul 2015 14:10:44 +0000 (11:10 -0300)]
ARM: multi_v7_defconfig: Select MX6UL and MX7D
Let MX6UL and MX7D SoCs be selected by default.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Mon, 27 Jul 2015 18:43:52 +0000 (20:43 +0200)]
Merge tag 'prima2-defconfig-for-4.2' of git://git./linux/kernel/git/baohua/linux into next/defconfig
Merge "CSR prima2_defconfig fixes for 4.2" from Barry Song:
enable SiRFSoC device drivers in CSR prima2_defconfig
make savedefconfig at first, then enable
1. sdhci driver
2. onkey
3. rtc
4. hwspinlock
for prima2_defconfig
* tag 'prima2-defconfig-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux:
ARM: prima2_defconfig: enable build for hwspinlock
ARM: prima2_defconfig: enable build for RTC
ARM: prima2_defconfig: enable build for misc input
ARM: prima2_defconfig: enable build for SiRFSoC SDHC host
ARM: prima2_defconfig: fix the outdated defconfig
Signed-off-by: Olof Johansson <olof@lixom.net>
Barry Song [Mon, 13 Jul 2015 14:13:47 +0000 (22:13 +0800)]
ARM: prima2_defconfig: enable build for hwspinlock
This patch enables hardware spinlock driver for CSRatlas7 platforms.
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Barry Song [Mon, 13 Jul 2015 14:05:10 +0000 (22:05 +0800)]
ARM: prima2_defconfig: enable build for RTC
This patch enables RTC_CLASS and RTC driver for SiRFSoC platforms.
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Barry Song [Mon, 13 Jul 2015 13:59:52 +0000 (21:59 +0800)]
ARM: prima2_defconfig: enable build for misc input
we need INPUT_MISC to enable INPUT_SIRFSOC_ONKEY which is the onkey
driver for SiRFSoC platforms.
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Barry Song [Mon, 13 Jul 2015 13:55:17 +0000 (21:55 +0800)]
ARM: prima2_defconfig: enable build for SiRFSoC SDHC host
this patch enables the MMC/SDHCI driver for SiRFSoC platforms.
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Barry Song [Mon, 13 Jul 2015 13:48:37 +0000 (21:48 +0800)]
ARM: prima2_defconfig: fix the outdated defconfig
this patch is againest v4.2-rc1, by doing:
$ make ARCH=arm prima2_defconfig
$ make ARCH=arm savedefconfig
$ cp defconfig arch/arm/configs/prima2_defconfig
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Fabio Estevam [Tue, 14 Jul 2015 13:49:46 +0000 (10:49 -0300)]
ARM: imx_v6_v7_defconfig: Select CONFIG_IKCONFIG_PROC
It is useful to know how the kernel was configured via:
zcat /proc/config.gz ,so select the CONFIG_IKCONFIG_PROC option.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Olof Johansson [Mon, 27 Jul 2015 12:35:39 +0000 (14:35 +0200)]
Merge tag 'renesas-defconfig-for-v4.3' of git://git./linux/kernel/git/horms/renesas into next/defconfig
Renesas ARM Based SoC Defconfig Updates for v4.3
* Remove marzen_defconfig
* shmobile_defconfig and multi_v7_defconfig
- Enable DPCM Sound Card
- Enable r8a7793/gose platform
* tag 'renesas-defconfig-for-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: Remove marzen_defconfig
ARM: multi_v7_defconfig: add Renesas DPCM Sound Card
ARM: shmobile: defconfig: add Renesas DPCM Sound Card
ARM: multi_v7_defconfig: Enable shmobile r8a7793/gose platform
ARM: shmobile: Enable gose board in multiplatform defconfig
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Mon, 27 Jul 2015 12:22:59 +0000 (14:22 +0200)]
Merge tag 'sti-defconfig-for-v4.3-1' of https://git./linux/kernel/git/mcoquelin/sti into next/defconfig
STi defconfig for v4.3, round 1
Highlights:
-----------
- Enable support ST's PWM driver in multi_v7
- Enable support PWM regulator in multi_v7
* tag 'sti-defconfig-for-v4.3-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/sti:
ARM: multi_v7_defconfig: Enable support for PWM Regulators
ARM: multi_v7_defconfig: Enable ST's PWM driver
Signed-off-by: Olof Johansson <olof@lixom.net>
Roger Shimizu [Tue, 21 Jul 2015 14:49:17 +0000 (23:49 +0900)]
ARM: defconfig: orion5x: add DT support
- add 2 DT device entries
- enable CONFIG_ARM_ATAG_DTB_COMPAT
Signed-off-by: Roger Shimizu <rogershimizu@gmail.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Stephen Boyd [Tue, 16 Jun 2015 20:31:16 +0000 (13:31 -0700)]
ARM: qcom_defconfig: Enable options for KS8851 ethernet
Enable the RPM and RPM regulator drivers as well as the KS8851
ethernet driver so that ethernet works on MSM8960 CDP.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>
This page took 0.047384 seconds and 5 git commands to generate.