Reuben Thomas [Wed, 22 Jul 2020 15:15:29 +0000 (16:15 +0100)]
Correct an error in the remote protocol specification
The list of commands that a stub must implement was wrong.
gdb/ChangeLog:
2020-07-22 Reuben Thomas <rrt@sc3d.org>
* gdb.texinfo (Remote Protocol, Overview): Correct the description
of which remote protocol commands are mandatory for a stub to
implement.
Andrew Burgess [Wed, 22 Jul 2020 13:57:55 +0000 (14:57 +0100)]
gdb/python: Use reference not pointer in py-registers.c
Pedro's review comments arrived after I'd already committed this
change:
commit
f7306dac19c502232f766c3881313857915f330d
Date: Tue Jul 7 15:00:30 2020 +0100
gdb/python: Reuse gdb.RegisterDescriptor objects where possible
See:
https://sourceware.org/pipermail/gdb-patches/2020-July/170726.html
There should be no user visible changes after this commit.
gdb/ChangeLog:
* python/py-registers.c (gdbpy_register_object_data_init): Remove
redundant local variable.
(gdbpy_get_register_descriptor): Extract descriptor vector as a
reference, not pointer, update code accordingly.
Nick Clifton [Wed, 22 Jul 2020 15:07:48 +0000 (16:07 +0100)]
Fix problems in CTF handling code exposed by the Coverity static analysis tool.
readelf * readelf.c (parse_args): Silence potential warnings about a
memory resource leak when allocating space for ctf option values.
(dump_section_as_ctf): Fix typo checking dump_ctf_strtab_name
variable.
libctf * ctf-archive.c (ctf_arc_write): Avoid calling close twice on the
same file descriptor.
Simon Marchi [Wed, 22 Jul 2020 13:56:08 +0000 (15:56 +0200)]
gdb/jit: skip jit symbol lookup if already detected the symbols don't exist
To detect whether an objfile is a JITer, we lookup JIT interface
symbols in the objfile. If an objfile does not have these symbols, we
conclude that it is not a JITer. An objfile that does not have the
symbols will never have them. Therefore, once we do a lookup and find
out that the objfile does not have JIT symbols, just set a flag so
that we can skip symbol lookup for that objfile the next time we reset
JIT breakpoints.
gdb/ChangeLog:
2020-07-22 Simon Marchi <simon.marchi@polymtl.ca>
Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* objfiles.h (struct objfile) <skip_jit_symbol_lookup>: New field.
* jit.c (jit_breakpoint_re_set_internal): Use the
`skip_jit_symbol_lookup` field.
Simon Marchi [Wed, 22 Jul 2020 13:56:08 +0000 (15:56 +0200)]
gdb/jit: apply minor cleanup and modernization
gdb/ChangeLog:
2020-07-22 Simon Marchi <simon.marchi@polymtl.ca>
Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* jit.c (jit_read_descriptor): Define the descriptor address once,
use twice.
(jit_breakpoint_deleted): Move the declaration of the loop variable
`iter` into the loop header.
(jit_breakpoint_re_set_internal): Move the declaration of the local
variable `objf_data` to the first point of definition.
(jit_event_handler): Move the declaration of local variables
`code_entry`, `entry_addr`, and `objf` to their first point of use.
Rename `objf` to `jited`.
Simon Marchi [Wed, 22 Jul 2020 13:56:08 +0000 (15:56 +0200)]
gdb/jit: remove jiter_objfile_data -> objfile back-link
This is no longer needed, remove it.
gdb/ChangeLog:
2020-07-22 Simon Marchi <simon.marchi@polymtl.ca>
* jit.h (struct jiter_objfile_data) <jiter_objfile_data, objfile>:
Remove.
* jit.c (get_jiter_objfile_data): Update.
Tankut Baris Aktemur [Wed, 22 Jul 2020 13:56:07 +0000 (15:56 +0200)]
gdb/jit: enable tracking multiple JITer objfiles
GDB's JIT handler stores an objfile (and data associated with it) per
program space to keep track of JIT breakpoint information. This assumes
that there is at most one JITer objfile in the program space. However,
there may be multiple. If so, only the first JITer's hook breakpoints
would be realized and the JIT events from the other JITers would be
missed.
This patch removes that assumption, allowing an arbitrary number of
objfiles within a program space to be JITers.
- The "unique" program_space -> JITer objfile pointer in
jit_program_space_data is removed. In fact, jit_program_space_data
becomes empty, so it is removed entirely.
- jit_breakpoint_deleted is modified, it now has to assume that any
objfile in a program space is a potential JITer. It now iterates on
all objfiles, checking if they are indeed JITers, and if they are,
whether the deleted breakpoint belongs to them.
- jit_breakpoint_re_set_internal also has to assume that any objfile in
a program space is a potential JITer. It creates (or updates) one
jiter_objfile_data structure for each JITer it finds.
- Same for jit_inferior_init. It now iterates all objfiles to read the
initial JIT object list.
gdb/ChangeLog:
2020-07-22 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Simon Marchi <simon.marchi@polymtl.ca>
* jit.c (struct jit_program_space_data): Remove.
(jit_program_space_key): Remove.
(jiter_objfile_data::~jiter_objfile_data): Remove program space
stuff.
(get_jit_program_space_data): Remove.
(jit_breakpoint_deleted): Iterate on all of the program space's
objfiles.
(jit_inferior_init): Likewise.
(jit_breakpoint_re_set_internal): Likewise. Also change return
type to void.
(jit_breakpoint_re_set): Pass current_program_space to
jit_breakpoint_re_set_internal.
gdb/testsuite/ChangeLog:
2020-07-22 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* gdb.base/jit-reader-simple.exp: Add a scenario for a binary that
loads two JITers.
Simon Marchi [Wed, 22 Jul 2020 13:56:07 +0000 (15:56 +0200)]
gdb/jit: move cached_code_address and jit_breakpoint to jiter_objfile_data
This is in preparation for allowing more than one JITer objfile per
program space. Once we do that, each JITer objfile will have its own
JIT breakpoint (on the __jit_debug_register_code function it provides).
The cached_code_address field is just the runtime / relocated address of
that symbol.
Since they are going to become JITer-objfile-specific and not
program-space-specific, move these fields from jit_program_space_data to
jiter_objfile_data.
gdb/ChangeLog:
2020-07-22 Simon Marchi <simon.marchi@polymtl.ca>
* jit.h (struct jiter_objfile_data) <cached_code_address,
jit_breakpoint>: Move to here from ...
* jit.c (jit_program_space_data): ... here.
(jiter_objfile_data::~jiter_objfile_data): Update.
(jit_breakpoint_deleted): Update.
(jit_breakpoint_re_set_internal): Update.
Simon Marchi [Wed, 22 Jul 2020 13:56:07 +0000 (15:56 +0200)]
gdb/jit: apply some simplifications and assertions
Following patch "gdb/jit: split jit_objfile_data in two", there are some
simplifications we can make. The invariants described there mean that
we can assume / assert some things instead of checking them using
conditionals.
If an instance of jiter_objfile_data exists for a given objfile, it's
because the required JIT interface symbols were found. Therefore, in
~jiter_objfile_data, the `register_code` field can't be NULL. It was
previously used to differentiate a jit_objfile_data object used for a
JITer vs a JITed. We can remove that check.
If an instance of jiter_objfile_data exists for a given objfile, it's
because it's the sole JITer objfile in the scope of its program space
(jit_program_space_data::objfile points to it). At the moment,
jit_breakpoint_re_set_internal won't create a second instance of
jiter_objfile_data for a given program space. Therefore, it's not
necessary to check for `ps_data != NULL` in ~jiter_objfile_data: we know
a jit_program_space_data for that program space exists. We also don't
need to check for `ps_data->objfile == this->objfile`, because we know
the objfile is the sole JITer in this program space. Replace these two
conditions with assertions.
A pre-condition for calling the jit_read_descriptor function (which is
respected in the two call sites) is that the objfile `jiter` _is_ a
JITer - it already has a jiter_objfile_data attached to it. When a
jiter_objfile_data exists, its `descriptor` field is necessarily set:
had the descriptor symbol not been found, jit_breakpoint_re_set_internal
would not have created the jiter_objfile_data. Remove the check and
early return in jit_read_descriptor. Access objfile's `jiter_data` field
directly instead of calling `get_jiter_objfile_data` (which creates the
jiter_objfile_data if it doesn't exist yet) and assert that the result
is not nullptr.
Finally, `jit_event_handler` is always passed a JITer objfile. So, add
an assertion to ensure that.
gdb/ChangeLog:
2020-07-22 Simon Marchi <simon.marchi@polymtl.ca>
* jit.c (jiter_objfile_data::~jiter_objfile_data): Remove some
checks.
(jit_read_descriptor): Remove NULL check.
(jit_event_handler): Add an assertion.
Simon Marchi [Wed, 22 Jul 2020 13:56:07 +0000 (15:56 +0200)]
gdb/jit: split jit_objfile_data in two
The jit_objfile_data is currently used to hold information about both
objfiles that are the result of JIT compilation (JITed) and objfiles
that can produce JITed objfiles (JITers). I think that this double use
of the type is confusing, and that things would be more obvious if we
had one type for each role.
This patch splits it into:
- jited_objfile_data: for data about an objfile that is the result of a
JIT compilation
- jiter_objfile_data: for data about an objfile which produces JITed
objfiles
There are now two JIT-related fields in an objfile, one for each kind.
With this change, the following invariants hold:
- an objfile has a non-null `jiter_data` field iff it defines the required
symbols of the JIT interface
- an objfile has a non-null `jited_data` field iff it is the product of
JIT compilation (has been produced by some JITer)
gdb/ChangeLog:
2020-07-22 Simon Marchi <simon.marchi@polymtl.ca>
* jit.h (struct jit_objfile_data): Split into...
(struct jiter_objfile_data): ... this ...
(struct jited_objfile_data): ... and this.
* objfiles.h (struct objfile) <jit_data>: Remove.
<jiter_data, jited_data>: New fields.
* jit.c (jit_objfile_data::~jit_objfile_data): Rename to ...
(jiter_objfile_data::~jiter_objfile_data): ... this.
(get_jit_objfile_data): Rename to ...
(get_jiter_objfile_data): ... this.
(add_objfile_entry): Update.
(jit_read_descriptor): Use get_jiter_objfile_data.
(jit_find_objf_with_entry_addr): Use objfile's jited_data field.
(jit_breakpoint_re_set_internal): Use get_jiter_objfile_data.
(jit_inferior_exit_hook): Use objfile's jited_data field.
Simon Marchi [Wed, 22 Jul 2020 13:56:06 +0000 (15:56 +0200)]
gdb/jit: link to jit_objfile_data directly from the objfile struct
Remove the use of objfile_data to associate a jit_objfile_data with an
objfile. Instead, directly link to a jit_objfile_data from an objfile
struct. The goal is to eliminate unnecessary abstraction.
The free_objfile_data function naturally becomes the destructor of
jit_objfile_data. However, free_objfile_data accesses the objfile to
which the data is attached, which the destructor of jit_objfile_data
doesn't have access to. To work around this, add a backlink to the
owning objfile in jit_objfile_data. This is however temporary, it goes
away in a subsequent patch.
gdb/ChangeLog:
2020-07-22 Simon Marchi <simon.marchi@polymtl.ca>
* jit.h: Forward-declare `struct minimal_symbol`.
(struct jit_objfile_data): Migrate to here from jit.c; also add a
constructor, destructor, and an objfile* field.
* jit.c (jit_objfile_data): Remove.
(struct jit_objfile_data): Migrate from here to jit.h.
(jit_objfile_data::~jit_objfile_data): New destructor
implementation with code moved from free_objfile_data.
(free_objfile_data): Delete.
(get_jit_objfile_data): Update to use the jit_data field of objfile.
(jit_find_objf_with_entry_addr): Ditto.
(jit_inferior_exit_hook): Ditto.
(_initialize_jit): Remove the call to
register_objfile_data_with_cleanup.
* objfiles.h (struct objfile) <jit_data>: New field.
Tankut Baris Aktemur [Wed, 22 Jul 2020 13:56:06 +0000 (15:56 +0200)]
gdb/jit: pass the jiter objfile as an argument to jit_event_handler
This is a refactoring that adds a new parameter to the `jit_event_handler`
function: the JITer objfile. The goal is to distinguish which JITer
triggered the JIT event, in case there are multiple JITers -- a capability
that is added in a subsequent patch.
gdb/ChangeLog:
2020-07-22 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* jit.h: Forward-declare `struct objfile`.
(jit_event_handler): Add a second parameter, the JITer objfile.
* jit.c (jit_read_descriptor): Change the signature to take the
JITer objfile as an argument instead of the jit_program_space_data.
(jit_inferior_init): Update the call to jit_read_descriptor.
(jit_event_handler): Use the new JITer objfile argument when calling
jit_read_descriptor.
* breakpoint.c (handle_jit_event): Update the call to
jit_event_handler to pass the JITer objfile.
Maciej W. Rozycki [Wed, 22 Jul 2020 11:46:00 +0000 (12:46 +0100)]
MIPS/GAS/testsuite: Fix JALR relocation tests for IRIX targets
With IRIX targets the JALR hint relocation is not produced for the o32
ABI, where it is considered a GNU extension. Consequently several tests
fail as the output produced by GAS fails to match patterns expecting the
relocation to be present where appropriate, even though output produced
is indeed correct.
As the absence of the relocation is expected, fix the tests by providing
respective alternative dump patterns with any JALR relocations removed,
removing numerous failures with `*-*-irix*' targets:
FAIL: MIPS jal-svr4pic (interaptiv-mr2)
FAIL: MIPS jal-svr4pic (micromips)
FAIL: MIPS jal-svr4pic (mips1)
FAIL: MIPS jal-svr4pic (mips2)
FAIL: MIPS jal-svr4pic (mips3)
FAIL: MIPS jal-svr4pic (mips4)
FAIL: MIPS jal-svr4pic (mips5)
FAIL: MIPS jal-svr4pic (mips32)
FAIL: MIPS jal-svr4pic (mips32r2)
FAIL: MIPS jal-svr4pic (mips32r3)
FAIL: MIPS jal-svr4pic (mips32r5)
FAIL: MIPS jal-svr4pic (mips32r6)
FAIL: MIPS jal-svr4pic (mips64)
FAIL: MIPS jal-svr4pic (mips64r2)
FAIL: MIPS jal-svr4pic (mips64r3)
FAIL: MIPS jal-svr4pic (mips64r5)
FAIL: MIPS jal-svr4pic (mips64r6)
FAIL: MIPS jal-svr4pic (octeon)
FAIL: MIPS jal-svr4pic (octeon2)
FAIL: MIPS jal-svr4pic (octeon3)
FAIL: MIPS jal-svr4pic (octeonp)
FAIL: MIPS jal-svr4pic (r3000)
FAIL: MIPS jal-svr4pic (r3900)
FAIL: MIPS jal-svr4pic (r4000)
FAIL: MIPS jal-svr4pic (r5900)
FAIL: MIPS jal-svr4pic (sb1)
FAIL: MIPS jal-svr4pic (vr5400)
FAIL: MIPS jal-svr4pic (xlr)
FAIL: MIPS jal-svr4pic noreorder (interaptiv-mr2)
FAIL: MIPS jal-svr4pic noreorder (micromips)
FAIL: MIPS jal-svr4pic noreorder (mips1)
FAIL: MIPS jal-svr4pic noreorder (mips2)
FAIL: MIPS jal-svr4pic noreorder (mips3)
FAIL: MIPS jal-svr4pic noreorder (mips4)
FAIL: MIPS jal-svr4pic noreorder (mips5)
FAIL: MIPS jal-svr4pic noreorder (mips32)
FAIL: MIPS jal-svr4pic noreorder (mips32r2)
FAIL: MIPS jal-svr4pic noreorder (mips32r3)
FAIL: MIPS jal-svr4pic noreorder (mips32r5)
FAIL: MIPS jal-svr4pic noreorder (mips32r6)
FAIL: MIPS jal-svr4pic noreorder (mips64)
FAIL: MIPS jal-svr4pic noreorder (mips64r2)
FAIL: MIPS jal-svr4pic noreorder (mips64r3)
FAIL: MIPS jal-svr4pic noreorder (mips64r5)
FAIL: MIPS jal-svr4pic noreorder (mips64r6)
FAIL: MIPS jal-svr4pic noreorder (octeon)
FAIL: MIPS jal-svr4pic noreorder (octeon2)
FAIL: MIPS jal-svr4pic noreorder (octeon3)
FAIL: MIPS jal-svr4pic noreorder (octeonp)
FAIL: MIPS jal-svr4pic noreorder (r3000)
FAIL: MIPS jal-svr4pic noreorder (r3900)
FAIL: MIPS jal-svr4pic noreorder (r4000)
FAIL: MIPS jal-svr4pic noreorder (r5900)
FAIL: MIPS jal-svr4pic noreorder (sb1)
FAIL: MIPS jal-svr4pic noreorder (vr5400)
FAIL: MIPS jal-svr4pic noreorder (xlr)
FAIL: MIPS R3000 jal-xgot
FAIL: MIPS -mabi=32 test 2 (SVR4 PIC)
FAIL: gas/mips/jalr2
FAIL: Relax microMIPS branches (pic)
FAIL: Relax microMIPS branches (insn32 mode, pic)
Strictly speaking no MIPSr6 or microMIPS target is supported by IRIX,
but GAS supports such configurations on the basis of uniformity, so
provide the relevant patterns too rather than excluding the combinations
from testing.
gas/
* testsuite/gas/mips/jal-svr4pic-irix.d: New file.
* testsuite/gas/mips/mips1@jal-svr4pic-irix.d: New file.
* testsuite/gas/mips/mipsr6@jal-svr4pic-irix.d: New file.
* testsuite/gas/mips/micromips@jal-svr4pic-irix.d: New file.
* testsuite/gas/mips/r3000@jal-svr4pic-irix.d: New file.
* testsuite/gas/mips/jal-svr4pic-local-irix.d: New file.
* testsuite/gas/mips/mips1@jal-svr4pic-local-irix.d: New file.
* testsuite/gas/mips/micromips@jal-svr4pic-local-irix.d: New
file.
* testsuite/gas/mips/r3000@jal-svr4pic-local-irix.d: New file.
* testsuite/gas/mips/jal-svr4pic-noreorder-irix.d: New file.
* testsuite/gas/mips/mips1@jal-svr4pic-noreorder-irix.d: New
file.
* testsuite/gas/mips/mipsr6@jal-svr4pic-noreorder-irix.d: New
file.
* testsuite/gas/mips/micromips@jal-svr4pic-noreorder-irix.d: New
file.
* testsuite/gas/mips/r3000@jal-svr4pic-noreorder-irix.d: New
file.
* testsuite/gas/mips/jal-xgot-irix.d: New file.
* testsuite/gas/mips/jalr2-irix.d: New file.
* testsuite/gas/mips/micromips-branch-relax-insn32-pic-irix.d:
New file.
* testsuite/gas/mips/micromips-branch-relax-pic-irix.d: New
file.
* testsuite/gas/mips/mips-abi32-pic2-irix.d: New file.
* testsuite/gas/mips/jal-svr4pic-local.d: Don't exclude
`*-*-irix*' targets. Add source file designator.
* testsuite/gas/mips/mips1@jal-svr4pic-local.d: Don't exclude
`*-*-irix*' targets.
* testsuite/gas/mips/r3000@jal-svr4pic-local.d: Likewise.
* testsuite/gas/mips/micromips@jal-svr4pic-local.d: Likewise.
* testsuite/gas/mips/jalr2.d: Add name designator.
* testsuite/gas/mips/mips.exp: Use respective IRIX variants for
tests involving the JALR relocation throughout.
Maciej W. Rozycki [Wed, 22 Jul 2020 11:46:00 +0000 (12:46 +0100)]
MIPS/GAS/testsuite: Use a helper variable for IRIX/non-IRIX test selection
Define a helper variable for IRIX/non-IRIX test selection and use it
with the PR 14798 test case.
gas/
* testsuite/gas/mips/mips.exp: Use a helper variable for
IRIX/non-IRIX test selection.
Pedro Alves [Wed, 22 Jul 2020 11:32:53 +0000 (12:32 +0100)]
gdbserver: handle running threads in qXfer:threads:read
On some systems, the gdb.multi/multi-target.exp testcase occasionally
fails like so:
Running src/gdb/testsuite/gdb.multi/multi-target.exp ...
FAIL: gdb.multi/multi-target.exp: info-inferiors: multi_process=on: inferior 1: info connections
FAIL: gdb.multi/multi-target.exp: info-inferiors: multi_process=on: inferior 1: info inferiors
FAIL: gdb.multi/multi-target.exp: info-inferiors: multi_process=on: inferior 2: info connections
FAIL: gdb.multi/multi-target.exp: info-inferiors: multi_process=on: inferior 2: info inferiors
FAIL: gdb.multi/multi-target.exp: info-inferiors: multi_process=on: inferior 3: inferior 3
... many more cascading fails.
The problem starts when the testcase runs an inferior against GDBserver:
(gdb) run
Starting program: build/gdb/testsuite/outputs/gdb.multi/multi-target/multi-target
Reading /lib64/ld-linux-x86-64.so.2 from remote target...
warning: File transfers from remote targets can be slow. Use "set sysroot" to access files locally instead.
Reading /lib64/ld-linux-x86-64.so.2 from remote target...
Reading /lib64/ld-2.31.so from remote target...
Reading /lib64/.debug/ld-2.31.so from remote target...
Reading /usr/lib/debug//lib64/ld-2.31.so from remote target...
Reading /usr/lib/debug/lib64//ld-2.31.so from remote target...
Reading target:/usr/lib/debug/lib64//ld-2.31.so from remote target...
Reading /lib/x86_64-linux-gnu/libpthread.so.0 from remote target...
Reading /lib/x86_64-linux-gnu/libc.so.6 from remote target...
Reading /lib/x86_64-linux-gnu/libc-2.31.so from remote target...
Reading /lib/x86_64-linux-gnu/.debug/libc-2.31.so from remote target...
Reading /usr/lib/debug//lib/x86_64-linux-gnu/libc-2.31.so from remote target...
Reading /usr/lib/debug//lib/x86_64-linux-gnu/libc-2.31.so from remote target...
Remote connection closed
...
Note the "Remote connection closed" message. That means GDBserver
exited abruptly.
I traced it down to the fact that GDB fetches the thread list from
GDBserver while the main thread of the process is still running. On
my main system where I wrote the testcase, I have not observed the
failure because it is slow enough that the thread stops before
GDBserver fetches the thread list in the problem scenario which I'll
describe below.
With some --remote-debug logging from GDBserver side, we see the last
packets before the connection closes:
...
getpkt ("vCont;c"); [no ack sent]
putpkt ("$OK#9a"); [noack mode]
getpkt ("Tp10f9a.10f9a"); [no ack sent]
putpkt ("$OK#9a"); [noack mode]
getpkt ("Hgp0.0"); [no ack sent]
putpkt ("$OK#9a"); [noack mode]
getpkt ("qXfer:threads:read::0,1000"); [no ack sent]
Note the vCont;c , which sets the program running, and then a
qXfer:threads:read packet at the end.
The problem happens when the thread list refresh (qXfer:threads:read)
is sent just while the main thread is running and it still hasn't
initialized its libpthread id internally. In that state, the main
thread's lwp will remain with the thread_known flag clear. See in
find_one_thread:
/* If the new thread ID is zero, a final thread ID will be available
later. Do not enable thread debugging yet. */
if (ti.ti_tid == 0)
return 0;
Now, back in server.cc, to handle the qXfer:threads:read, we reach
handle_qxfer_threads -> handle_qxfer_threads_proper, and the latter
then calls handle_qxfer_threads_worker for each known thread. In
handle_qxfer_threads_worker, we call target_thread_handle. This ends
up in thread_db_thread_handle, here:
if (!lwp->thread_known && !find_one_thread (thread->id))
return false;
Since the thread ID isn't known yet, we call find_one_thread. This
calls into libthread_db.so, which accesses memory. Because the
current thread is running, that fails and we throw an error, here:
/* Get information about this thread. */
err = thread_db->td_ta_map_lwp2thr_p (thread_db->thread_agent, lwpid, &th);
if (err != TD_OK)
error ("Cannot get thread handle for LWP %d: %s",
lwpid, thread_db_err_str (err));
The current design is that whenever GDB-facing packets/requests need
to accesses memory, server.cc is supposed to prepare the target for
the access. See gdb_read_memory / gdb_write_memory. This preparation
means pausing threads if in non-stop mode (someday we could lift this
requirement, but we will still need to pause to access registers or do
other related ptrace accesses like PTRACE_GET_THREAD_AREA). Note that
the multi-target.exp testcase forces "maint set target-non-stop on".
So the fix here is to prepare the target to access memory when
handling qXfer:threads:read too.
gdbserver/ChangeLog:
* inferiors.cc (switch_to_process): New, moved here from
thread-db.cc, and made extern.
* inferiors.h (switch_to_process): Declare.
* server.cc: Include "gdbsupport/scoped_restore.h".
(handle_qxfer_threads_proper): Now returns bool. Prepare to
access memory around target calls.
(handle_qxfer_threads): Handle errors.
* thread-db.cc (switch_to_process): Moved to inferiors.cc.
H.J. Lu [Wed, 22 Jul 2020 10:49:07 +0000 (03:49 -0700)]
ld: Properly override the IR definition
We change the previous definition in the IR object to undefweak only
after all LTO symbols have been read.
include/
PR ld/26262
PR ld/26267
* bfdlink.h (bfd_link_info): Add lto_all_symbols_read.
ld/
PR ld/26262
PR ld/26267
* ldlang.c (lang_process): Set lto_all_symbols_read after all
LTO IR symbols have been read.
* plugin.c (plugin_notice): Override the IR definition only if
all LTO IR symbols have been read or the new definition is
non-weak and the the IR definition is weak
* testsuite/ld-plugin/lto.exp: Run PR ld/26262 and ld/26267
tests.
* testsuite/ld-plugin/pr26262a.c: New file.
* testsuite/ld-plugin/pr26262b.c: Likewise.
* testsuite/ld-plugin/pr26262c.c: Likewise.
* testsuite/ld-plugin/pr26267.err: Likewise.
* testsuite/ld-plugin/pr26267a.c: Likewise.
* testsuite/ld-plugin/pr26267b.c: Likewise.
* testsuite/ld-plugin/pr26267c.c: Likewise.
Max Filippov [Wed, 22 Jul 2020 09:17:38 +0000 (02:17 -0700)]
bfd: xtensa: pr26246: fix removed_literal_compare
2020-07-22 Max Filippov <jcmvbkbc@gmail.com>
bfd/
PR 26246
* elf32-xtensa.c (removed_literal_compare): Use correct pointer
type for the first function argument. Rename pointers to reflect
that they have distinct types.
John Baldwin [Wed, 22 Jul 2020 00:28:16 +0000 (17:28 -0700)]
Retire the now-unused gdbarch handle_segmentation_fault hook.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.
* gdbarch.sh (handle_segmentation_fault): Remove method.
* infrun.c (handle_segmentation_fault): Remove.
(print_signal_received_reason): Remove call to
handle_segmentation_fault.
John Baldwin [Wed, 22 Jul 2020 00:28:16 +0000 (17:28 -0700)]
Migrate the sparc64 ADI handle_segmentation_fault hook to report_signal_info.
gdb/ChangeLog:
* sparc64-linux-tdep.c (sparc64_linux_handle_segmentation_fault):
Rename to sparc64_linux_report_signal_info and add siggnal
argument.
(sparc64_linux_init_abi): Use sparc64_linux_report_signal_info
instead of sparc64_linux_handle_segmentation_fault.
John Baldwin [Wed, 22 Jul 2020 00:28:16 +0000 (17:28 -0700)]
Migrate the x86 MPX handle_segmentation_fault hook to report_signal_info.
gdb/ChangeLog:
* amd64-linux-tdep.c (amd64_linux_init_abi_common): Use
i386_linux_report_signal_info instead of
i386_linux_handle_segmentation_fault.
* i386-linux-tdep.c (i386_linux_handle_segmentation_fault): Rename
to i386_linux_report_signal_info and add siggnal argument.
(i386_linux_init_abi): Use i386_linux_report_signal_info instead
of i386_linux_handle_segmentation_fault.
* i386-linux-tdep.h (i386_linux_handle_segmentation_fault): Rename
to i386_linux_report_signal_info and add siggnal argument.
John Baldwin [Wed, 22 Jul 2020 00:28:16 +0000 (17:28 -0700)]
Report architecture-specific signal information for core files.
When opening a core file, if the process terminated due to a signal,
invoke the gdbarch report_signal_info hook to report
architecture-specific information about the signal.
gdb/ChangeLog:
* corelow.c (core_target_open): Invoke gdbarch report_signal_info
hook if present.
John Baldwin [Wed, 22 Jul 2020 00:28:16 +0000 (17:28 -0700)]
Add a new gdbarch hook to report additional signal information.
This is a more general version of the existing handle_segmentation_fault
hook that is able to report information for an arbitrary signal, not
just SIGSEGV.
gdb/ChangeLog:
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.
* gdbarch.sh (report_signal_info): New method.
* infrun.c (print_signal_received_reason): Invoke gdbarch
report_signal_info hook if present.
GDB Administrator [Wed, 22 Jul 2020 00:00:06 +0000 (00:00 +0000)]
Automatic date update in version.in
Andrew Burgess [Tue, 7 Jul 2020 14:26:42 +0000 (15:26 +0100)]
gdb/python: Reuse gdb.RegisterGroup objects where possible
Only create one gdb.RegisterGroup Python object for each of GDB's
reggroup objects.
I could have added a field into the reggroup object to hold the Python
object pointer for each reggroup, however, as reggroups are never
deleted within GDB, and are global (not per-architecture) a simpler
solution seemed to be just to hold a single global map from reggroup
pointer to a Python object representing the reggroup. Then we can
reuse the objects out of this map.
After this commit it is possible for a user to tell that two
gdb.RegisterGroup objects are now identical when previously they were
unique, however, as both these objects are read-only I don't think
this should be a problem.
There should be no other user visible changes after this commit.
gdb/ChangeLog:
* python/py-registers.c : Add 'unordered_map' include.
(gdbpy_new_reggroup): Renamed to...
(gdbpy_get_reggroup): ...this. Update to only create register
group descriptors when needed.
(gdbpy_reggroup_iter_next): Update.
gdb/testsuite/ChangeLog:
* gdb.python/py-arch-reg-groups.exp: Additional tests.
Andrew Burgess [Tue, 7 Jul 2020 14:00:30 +0000 (15:00 +0100)]
gdb/python: Reuse gdb.RegisterDescriptor objects where possible
Instead of having the gdb.RegisterDescriptorIterator creating new
gdb.RegisterDescriptor objects for each regnum, instead cache
gdb.RegisterDescriptor objects on the gdbarch object and reuse these.
This means that for every gdbarch/regnum pair there is a single unique
gdb.RegisterDescriptor, this feels like a neater implementation than
the existing one.
It is possible for a user to see (in Python code) that the descriptors
are now identical, but as the descriptors are read-only this should
make no real difference.
There should be no other user visible changes.
gdb/ChangeLog:
* python/py-registers.c (gdbpy_register_object_data): New static
global.
(gdbpy_register_object_data_init): New function.
(gdbpy_new_register_descriptor): Renamed to...
(gdbpy_get_register_descriptor): ...this, and update to reuse
existing register descriptors where possible.
(gdbpy_register_descriptor_iter_next): Update.
(gdbpy_initialize_registers): Register new gdbarch data.
gdb/testsuite/ChangeLog:
* gdb.python/py-arch-reg-names.exp: Additional tests.
Simon Marchi [Tue, 21 Jul 2020 20:49:35 +0000 (16:49 -0400)]
gdb, gdbserver: make stopped_pids global variables static
I noticed that my IDE was confusing the two stopped_pids variables.
There is one in GDB and one in GDBserver. They should be static, make
them so.
gdb/ChangeLog:
* linux-nat.c (stopped_pids): Make static.
gdbserver/ChangeLog:
* linux-low.cc (stopped_pids): Make static.
Change-Id: If4a2bdcd45d32eb3a732d266a0f686a4e4c23672
Simon Marchi [Tue, 21 Jul 2020 19:12:56 +0000 (15:12 -0400)]
gdb: handle undefined properties in ada_discrete_type_{low,high}_bound
This patch fixes a failure in test `gdb.ada/access_to_packed_array.exp`.
The failure was introduced by
8c2e4e0689ea24 ("gdb: add accessors to
struct dynamic_prop"), but I think it in fact exposed a latent buglet.
Note that to reproduce it, I had to use AdaCore's Ada "distribution"
[1]. The one that comes with my distro doesn't have debug info for the
standard library stuff, so the bug wouldn't trigger.
The bug is that while executing the `maint print symbols` command, we
are accessing the value of a range type's high bound dynamic prop as a
"const" value (PROP_CONST), when it is actually undefined
(PROP_UNDEFINED). It results in this failed assertion:
/home/simark/src/binutils-gdb/gdb/gdbtypes.h:526: internal-error: LONGEST dynamic_prop::const_val() const: Assertion `m_kind == PROP_CONST' failed.
`ada_discrete_type_high_bound` calls `resolve_dynamic_type`, which
eventually calls `resolve_dynamic_range`. This one is responsible for
evaluating a range type's dynamic bounds in the current context and
returning static values. It returns a new range type with these static
bounds.
The resulting bounds are typically properties of the PROP_CONST kind.
But when it's not possible to evaluate the properties, the properties
are PROP_UNDEFINED. In the case we are looking at, it's not possible to
evaluate the dynamic high bound, which is of type PROP_LOCLIST. It
would require a target with registers and a frame, but we run `maint
print symbols` without a live process.
`ada_discrete_type_high_bound` then accesses the high bound
unconditionally as a const value, which triggers the assert.
Note that the previous code in resolve_dynamic_range (before commit
8c2e4e0689ea24) did this:
prop = &TYPE_RANGE_DATA (dyn_range_type)->high;
if (dwarf2_evaluate_property (prop, NULL, addr_stack, &value))
{
high_bound.kind = PROP_CONST;
high_bound.data.const_val = value;
if (TYPE_RANGE_DATA (dyn_range_type)->flag_upper_bound_is_count)
high_bound.data.const_val
= low_bound.data.const_val + high_bound.data.const_val - 1;
}
else
{
high_bound.kind = PROP_UNDEFINED;
high_bound.data.const_val = 0;
}
That did not really made sense, setting the kind to `PROP_UNDEFINED` but
also setting the `const_val` field. The `const_val` field is only
meaningful if the kind if `PROP_CONST`. The new code
(post-
8c2e4e0689ea24) simply calls `set_undefined ()`.
Fix this by making the caller, `ada_discrete_type_high_bound`, consider
that a range high bound could be of kind `PROP_UNDEFINED`, and return
0 in this case. I made the same change in ada_discrete_type_low_bound.
I didn't encounter a problem with this function, but the same could in
theory happen there.
Returning 0 here is kind of a lie, but the goal here is just to restore
the behavior of pre-
8c2e4e0689ea24.
The output of `maint print symbols` is:
typedef <ada__exceptions__exception_data__append_info_basic_exception_information__TTnameSP1: range 1 .. 0;
record
ada__exceptions__exception_data__append_info_basic_exception_information__TTnameSP1: range 1 .. 0;
end record;
Instead of `1 .. 0`, which does not make sense, we could say something
like `1 .. <dynamic>`. But that would require more changes than I'm
willing to do at the moment.
[1] https://www.adacore.com/download
gdb/ChangeLog:
PR ada/26235
* gdbtypes.c (ada_discrete_type_low_bound,
ada_discrete_type_high_bound): Handle undefined bounds.
Change-Id: Ia12167e61ef030941c0790f83294f3418e6a7c12
Tom de Vries [Tue, 21 Jul 2020 14:22:34 +0000 (16:22 +0200)]
[gdb/testsuite] Fix gdb.reverse/solib-{precsave,reverse}.exp with gcc-8
With gcc-8, we have the following FAILs, which are not there for gcc-7:
...
FAIL: gdb.reverse/solib-precsave.exp: reverse-step into solib function one
FAIL: gdb.reverse/solib-precsave.exp: reverse-step within solib function one
FAIL: gdb.reverse/solib-precsave.exp: reverse-step back to main one
FAIL: gdb.reverse/solib-precsave.exp: reverse-step into solib function two
FAIL: gdb.reverse/solib-precsave.exp: reverse-step within solib function two
FAIL: gdb.reverse/solib-precsave.exp: reverse-step back to main two
FAIL: gdb.reverse/solib-precsave.exp: run until end part two
FAIL: gdb.reverse/solib-precsave.exp: reverse-next over solib function one
FAIL: gdb.reverse/solib-reverse.exp: reverse-step into solib function one
FAIL: gdb.reverse/solib-reverse.exp: reverse-step within solib function one
FAIL: gdb.reverse/solib-reverse.exp: reverse-step back to main one
FAIL: gdb.reverse/solib-reverse.exp: reverse-step into solib function two
FAIL: gdb.reverse/solib-reverse.exp: reverse-step within solib function two
FAIL: gdb.reverse/solib-reverse.exp: reverse-step back to main two
FAIL: gdb.reverse/solib-reverse.exp: run until end part two
FAIL: gdb.reverse/solib-reverse.exp: reverse-next over solib function one
...
Looking at the first FAIL for gdb.reverse/solib-precsave.exp, we have:
...
(gdb) PASS: reverse-next first shr1
reverse-next^M
40 b[0] = 6; b[1] = 9; /* generic statement, end part two */^M
(gdb) PASS: reverse-next generic
reverse-step^M
-shr2 (x=17) at gdb.reverse/shr2.c:23^M
-23 }^M
-(gdb) PASS: reverse-step into solib function one
+38 b[1] = shr2(17); /* middle part two */^M
+(gdb) FAIL: reverse-step into solib function one
...
There's a difference in line number info for line 38, where for gcc-7 we have:
...
Line number Starting address View Stmt
38 0x4005c6 x
...
and for gcc-8:
...
38 0x4005c1 x
38 0x4005cb x
...
which explains why we don't step directly into "solib function one".
Fix this by recognizing the extra "recommended breakpoint location" and
issuing an additional reverse-next/step.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-07-21 Tom de Vries <tdevries@suse.de>
* gdb.reverse/solib-precsave.exp: Handle additional "recommended
breakpoint locations".
* gdb.reverse/solib-reverse.exp: Same.
Tom de Vries [Tue, 21 Jul 2020 13:27:18 +0000 (15:27 +0200)]
[gdb/testsuite] Fix step-reverse.c with gcc-10
The file gdb.reverse/step-reverse.c is used in test-cases:
- gdb.reverse/step-reverse.exp
- gdb.reverse/next-reverse-bkpt-over-sr.exp
- gdb.reverse/step-precsave.exp
With gcc-7, there are only PASSes (apart from one KFAIL), but with gcc-10, we
have the following FAILs:
...
FAIL: gdb.reverse/step-reverse.exp: reverse stepi from a function call \
(start statement)
FAIL: gdb.reverse/step-reverse.exp: simple reverse stepi
FAIL: gdb.reverse/step-reverse.exp: reverse step out of called fn
FAIL: gdb.reverse/step-reverse.exp: reverse next over call
FAIL: gdb.reverse/step-reverse.exp: reverse step test 1
FAIL: gdb.reverse/step-reverse.exp: reverse next test 1
FAIL: gdb.reverse/step-reverse.exp: reverse step test 2
FAIL: gdb.reverse/step-reverse.exp: reverse next test 2
FAIL: gdb.reverse/step-precsave.exp: reverse stepi from a function call \
(start statement)
FAIL: gdb.reverse/step-precsave.exp: simple reverse stepi
FAIL: gdb.reverse/step-precsave.exp: reverse step out of called fn
FAIL: gdb.reverse/step-precsave.exp: reverse next over call
FAIL: gdb.reverse/step-precsave.exp: reverse step test 1
FAIL: gdb.reverse/step-precsave.exp: reverse next test 1
FAIL: gdb.reverse/step-precsave.exp: reverse step test 2
FAIL: gdb.reverse/step-precsave.exp: reverse next test 2
...
Looking at the first step-precsave.exp FAIL, we have:
...
(gdb) stepi^M
26 myglob++; return 0; /* ARRIVED IN CALLEE */^M
(gdb) PASS: gdb.reverse/step-precsave.exp: reverse stepi thru function return
stepi^M
0x000000000040055f 26 myglob++; return 0; /* ARRIVED IN CALLEE */^M
(gdb) FAIL: gdb.reverse/step-precsave.exp: reverse stepi from a function call \
(start statement)
...
There's a difference in line info for callee:
...
25 int callee() { /* ENTER CALLEE */
26 myglob++; return 0; /* ARRIVED IN CALLEE */
27 } /* RETURN FROM CALLEE */
...
between gcc-7:
...
Line number Starting address View Stmt
25 0x400557 x
26 0x40055b x
27 0x40056f x
...
and gcc-10:
...
25 0x400552 x
26 0x400556 x
26 0x400565 x
27 0x40056a x
...
The two "recommend breakpoint location" entries at line 26 are for the two
statements ("myglob++" and "return 0"), but the test-case expects to hit line
26 only once.
Fix this by rewriting the two statements into a single statement:
...
- myglob++; return 0; /* ARRIVED IN CALLEE */
+ return myglob++; /* ARRIVED IN CALLEE */
...
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-07-21 Tom de Vries <tdevries@suse.de>
* gdb.reverse/step-reverse.c (callee): Merge statements.
Kamil Rytarowski [Mon, 20 Jul 2020 15:07:25 +0000 (17:07 +0200)]
Enable multi-process mode in the NetBSD native target.
This enables proper support for multiple inferiors and ptrace(2)
assisted management of the inferior processes and their threads.
(gdb) info inferior
Num Description Connection Executable
* 1 process 14952 1 (native) /usr/bin/dig
2 <null> 1 (native)
3 process 25684 1 (native) /bin/ls
4 <null> 1 (native) /bin/ls
Without this patch, additional inferiors can be added, but not
properly controlled.
gdb/ChangeLog:
* nbsd-nat.h (nbsd_nat_target::supports_multi_process): New
declaration.
* nbsd-nat.c (nbsd_nat_target::supports_multi_process): New
function.
Jan Beulich [Tue, 21 Jul 2020 12:20:11 +0000 (14:20 +0200)]
Revert "x86: Don't display eiz with no scale"
This reverts commit
04c662e2b66bedd050f97adec19afe0fcfce9ea7.
In my underlying suggestion I neglected the fact that in those
cases (,%eiz,1) is the only visible indication that 32-bit
addressing is in effect.
Cooper Qu [Tue, 21 Jul 2020 10:32:44 +0000 (11:32 +0100)]
Fix Unreasonable arch and cpu conflict warning for ther CSky architecture.
* config/tc-csky.c (md_begin): Fix tests of arch and mach flags.
Nick Clifton [Tue, 21 Jul 2020 10:22:36 +0000 (11:22 +0100)]
Updated Swedish translation for the binutils sub-directory
Tom de Vries [Tue, 21 Jul 2020 09:37:17 +0000 (11:37 +0200)]
[gdb/testsuite] Fix gdb.fortran/info-modules.exp with gcc-8
When using test-case gdb.fortran/info-modules.exp with gcc 8.4.0, I run into:
...
FAIL: gdb.fortran/info-modules.exp: info module variables: check for entry \
'info-types.f90', '35', 'Type m1t1 mod1::__def_init_mod1_M1t1;'
FAIL: gdb.fortran/info-modules.exp: info module variables: check for entry \
'info-types.f90', '35', 'Type __vtype_mod1_M1t1 mod1::__vtab_mod1_M1t1;'
...
This is caused by this change in gdb output:
...
(gdb) info module variables
...
File gdb.fortran/info-types.f90:
-35: Type m1t1 mod1::__def_init_mod1_M1t1;
+ Type m1t1 mod1::__def_init_mod1_M1t1;
-35: Type __vtype_mod1_M1t1 mod1::__vtab_mod1_M1t1;
+ Type __vtype_mod1_M1t1 mod1::__vtab_mod1_M1t1;
21: real(kind=4) mod1::mod1_var_1;
22: integer(kind=4) mod1::mod1_var_2;
...
caused by a change in debug info.
Fix this by allowing those entries without line number.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-07-21 Tom de Vries <tdevries@suse.de>
* gdb.fortran/info-modules.exp (info module variables): Allow missing
line numbers for some variables.
Jan Beulich [Tue, 21 Jul 2020 09:34:40 +0000 (11:34 +0200)]
Revert "x86: Replace evex-no-scale.s with evex-no-scale-[32|64].s"
This reverts commit
19449d7c67690c641b1ec9c13ff3531677a5afcc, addressing
the issue that was run into back then: There was no relationship to i686-*
and/or cross builds on 64-bit hosts. The sole problem was the use of / as
as comment character in certain ELF targets. Instead of division, use a
comparison operation.
At the same time also revert the ELF related part of
99c2d522f7a7 ("x86:
Update assembler tests for non-ELF targets") by replacing the construct
that's problematic for non-ELF, and by adding the "#pass" patterns to
the expected output files to cover for the tail padding generated into
COFF output.
Tom de Vries [Tue, 21 Jul 2020 08:25:42 +0000 (10:25 +0200)]
[gdb/testsuite] Make inline-locals.c deterministic
When running testcase gdb.opt/inline-locals.exp on openSUSE Tumbleweed, I get:
...
(gdb) info locals^M
array = {0 <repeats 48 times>,
15775231, 0, 194, 0, -11497, 32767,
4199061, \
0, 0, 0, 0, 0,
4198992, 0,
4198432, 0}^M
(gdb) FAIL: gdb.opt/inline-locals.exp: info locals above bar 2
...
Fix this by:
- completely initializing array before printing any value
- updating the pattern to match "array = {0 <repeats 64 times>}"
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-07-21 Tom de Vries <tdevries@suse.de>
* gdb.opt/inline-locals.c (init_array): New func.
(func1): Use init_array.
* gdb.opt/inline-locals.exp: Update pattern.
Tom de Vries [Tue, 21 Jul 2020 07:40:21 +0000 (09:40 +0200)]
[gdb/testsuite] Don't leak env vars in gdb.debuginfod/fetch_src_and_symbols.exp
Test-case gdb.debuginfod/fetch_src_and_symbols.exp leaks env vars
DEBUGINFOD_URLS, DEBUGINFOD_TIMEOUT and DEBUGINFOD_CACHE_PATH, causing
timeouts in subsequent tests.
Fix this by using save_vars. Also, fix PATH and DUPLICATE errors. Finally,
cleanup whitespace.
gdb/testsuite/ChangeLog:
2020-07-21 Tom de Vries <tdevries@suse.de>
* gdb.debuginfod/fetch_src_and_symbols.exp: Use save_vars for env
vars. Fix PATH and DUPLICATE errors. Cleanup whitespace.
Maciej W. Rozycki [Tue, 21 Jul 2020 00:59:24 +0000 (01:59 +0100)]
MIPS/GAS: Remove stale `prev_reloc_op_frag' variable
Ever since commit
4d7206a284ee ("Rework MIPS macro relaxation, fix string
merging bug"), <https://sourceware.org/ml/binutils/2004-01/msg00248.html>,
`prev_reloc_op_frag' has only been set and never used. Remove it then.
gas/
* config/tc-mips.c (prev_reloc_op_frag): Remove variable.
(my_getSmallExpression): Adjust accordingly.
GDB Administrator [Tue, 21 Jul 2020 00:00:06 +0000 (00:00 +0000)]
Automatic date update in version.in
John Baldwin [Mon, 20 Jul 2020 16:09:58 +0000 (09:09 -0700)]
Implement the skip_solib_resolver gdbarch hook for FreeBSD architectures.
The ELF runtime linker on all FreeBSD architectures uses the
"_rtld_bind" entry point for unresolved PTL entries. FreeBSD/mips has
an additional entry point called "_mips_rtld_bind".
gdb/ChangeLog:
* fbsd-tdep.c (fbsd_skip_solib_resolver): New function.
(fbsd_init_abi): Install gdbarch "skip_solib_resolver" method.
* fbsd-tdep.h (fbsd_skip_solib_resolver): New prototype.
* mips-fbsd-tdep.c (mips_fbsd_skip_solib_resolver): New function.
(mips_fbsd_init_abi): Install gdbarch "skip_solib_resolver"
method.
Ludovic Courtès [Sun, 28 Jun 2020 14:25:40 +0000 (16:25 +0200)]
guile: Add support for Guile 3.0.
gdb/ChangeLog
2020-06-28 Ludovic Courtès <ludo@gnu.org>
* guile/scm-math.c (vlscm_integer_fits_p): Use 'uintmax_t'
and 'intmax_t' instead of 'scm_t_uintmax' and 'scm_t_intmax',
which are deprecated in Guile 3.0.
* configure.ac (try_guile_versions): Add "guile-3.0".
* configure (try_guile_versions): Regenerate.
* NEWS: Update entry.
gdb/testsuite/ChangeLog
2020-06-28 Ludovic Courtès <ludo@gnu.org>
* gdb.guile/source2.scm: Add #f first argument to 'format'.
* gdb.guile/types-module.exp: Remove "ERROR:" from
regexps since Guile 3.0 no longer prints that.
gdb/doc/ChangeLog
2020-06-28 Ludovic Courtès <ludo@gnu.org>
* doc/guile.texi (Guile Introduction): Mention Guile 3.0.
Change-Id: Iff116c2e40f334e4e0ca4e759a097bfd23634679
Ludovic Courtès [Sun, 28 Jun 2020 14:25:39 +0000 (16:25 +0200)]
guile: Add support for Guile 2.2.
This primarily updates code that uses the I/O port API of Guile.
gdb/ChangeLog
2020-06-28 Ludovic Courtès <ludo@gnu.org>
Doug Evans <dje@google.com>
PR gdb/21104
* guile/scm-ports.c (USING_GUILE_BEFORE_2_2): New macro.
(ioscm_memory_port)[read_buf_size, write_buf_size]: Wrap in #if
USING_GUILE_BEFORE_2_2.
(stdio_port_desc, memory_port_desc) [!USING_GUILE_BEFORE_2_2]:
Change type to 'scm_t_port_type *'.
(natural_buffer_size) [!USING_GUILE_BEFORE_2_2]: New variable.
(ioscm_open_port) [USING_GUILE_BEFORE_2_2]: Add 'stream'
parameter and honor it. Update callers.
(ioscm_open_port) [!USING_GUILE_BEFORE_2_2]: New function.
(ioscm_read_from_port, ioscm_write) [!USING_GUILE_BEFORE_2_2]: New
functions.
(ioscm_fill_input, ioscm_input_waiting, ioscm_flush): Wrap in #if
USING_GUILE_BEFORE_2_2.
(ioscm_init_gdb_stdio_port) [!USING_GUILE_BEFORE_2_2]: Use
'ioscm_read_from_port'. Call 'scm_set_port_read_wait_fd'.
(ioscm_init_stdio_buffers) [!USING_GUILE_BEFORE_2_2]: New function.
(gdbscm_stdio_port_p) [!USING_GUILE_BEFORE_2_2]: Use 'SCM_PORTP'
and 'SCM_PORT_TYPE'.
(gdbscm_memory_port_end_input, gdbscm_memory_port_seek)
(ioscm_reinit_memory_port): Wrap in #if USING_GUILE_BEFORE_2_2.
(gdbscm_memory_port_read, gdbscm_memory_port_write)
(gdbscm_memory_port_seek, gdbscm_memory_port_close)
[!USING_GUILE_BEFORE_2_2]: New functions.
(gdbscm_memory_port_print): Remove use of 'SCM_PTOB_NAME'.
(ioscm_init_memory_port_type) [!USING_GUILE_BEFORE_2_2]: Use
'gdbscm_memory_port_read'.
Wrap 'scm_set_port_end_input', 'scm_set_port_flush', and
'scm_set_port_free' calls in #if USING_GUILE_BEFORE_2_2.
(gdbscm_get_natural_buffer_sizes) [!USING_GUILE_BEFORE_2_2]: New
function.
(ioscm_init_memory_port): Remove.
(ioscm_init_memory_port_stream): New function
(ioscm_init_memory_port_buffers) [USING_GUILE_BEFORE_2_2]: New
function.
(gdbscm_memory_port_read_buffer_size) [!USING_GUILE_BEFORE_2_2]:
Return scm_from_uint (0).
(gdbscm_set_memory_port_read_buffer_size_x)
[!USING_GUILE_BEFORE_2_2]: Call 'scm_setvbuf'.
(gdbscm_memory_port_write_buffer_size) [!USING_GUILE_BEFORE_2_2]:
Return scm_from_uint (0).
(gdbscm_set_memory_port_write_buffer_size_x)
[!USING_GUILE_BEFORE_2_2]: Call 'scm_setvbuf'.
* configure.ac (try_guile_versions): Add "guile-2.2".
* configure: Regenerate.
* NEWS: Add entry.
gdb/testsuite/ChangeLog
2020-06-28 Ludovic Courtès <ludo@gnu.org>
* gdb.guile/scm-error.exp ("source $remote_guile_file_1"): Relax
error regexp to match on Guile 2.2.
gdb/doc/ChangeLog
2020-06-28 Ludovic Courtès <ludo@gnu.org>
* guile.texi (Memory Ports in Guile): Mark
'memory-port-read-buffer-size',
'set-memory-port-read-buffer-size!',
'memory-port-write-buffer-size',
'set-memory-port-read-buffer-size!' as deprecated.
* doc/guile.texi (Guile Introduction): Clarify which Guile
versions are supported.
Change-Id: Ib119b10a2787446e0ae482a5e1b36d809c44bb31
Gary Benson [Mon, 20 Jul 2020 14:01:04 +0000 (15:01 +0100)]
Skip tests requiring "alignof (void)" when compiling using clang
As an extension, GCC allows void pointer arithmetic, with sizeof(void)
and alignof(void) both 1. GDB supports this extension, but clang does
not, and fails to compile the generated output of gdb.cp/align.exp
with the following error:
gdb compile failed, /gdbtest/build/gdb/testsuite/outputs/gdb.cp/align/align.cc:28:23:
error: invalid application of 'alignof' to an incomplete type 'void'
unsigned a_void = alignof (void);
^ ~~~~~~
1 error generated.
This commit adds preprocessor conditionals to the generated output, to
omit the unsupported code when using clang, and supplies the expected
value so the test can complete.
gdb/testsuite/ChangeLog:
* gdb.cp/align.exp: Fix "alignof (void)" tests when compiling
with clang.
Nick Clifton [Mon, 20 Jul 2020 13:57:38 +0000 (14:57 +0100)]
Fix problem running a few PowerPC linker tests when the .data section is retained.
* testsuite/ld-powerpc/powerpc.exp (ppcelftests): Use section name
.PPC.EMB.apuinfo instead of section number 2 in apuinfo tests.
Alan Modra [Mon, 20 Jul 2020 04:02:34 +0000 (13:32 +0930)]
PR26265, Spurious 'gc-sections requires ... when --init or --fini
bfd/
* elflink.c (_bfd_elf_gc_keep): Use bfd_is_const_section.
ld/
PR 26265
* ldlang.c (undef_from_cmdline): Delete.
(ldlang_add_undef): Mark "cmdline" param unused.
(lang_end): Traverse gc_sym_list to determine whether a symbol root
has been specified. Update error message.
* testsuite/ld-gc/noent.d: Adjust for changed error message.
Tom de Vries [Mon, 20 Jul 2020 12:40:52 +0000 (14:40 +0200)]
[gdb/testsuite] Stabilize execution order in omp-par-scope.c
In openmp test-case gdb.threads/omp-par-scope.exp we xfail and kfail dependent
on omp_get_thread_num (). Since execution order of the threads can vary from
execution to execution, this can cause changes in test results.
F.i., we can see this difference between two test runs:
...
-KFAIL: single_scope: first thread: print i3 (PRMS: gdb/22214)
+PASS: single_scope: first thread: print i3
-PASS: single_scope: second thread: print i3
+KFAIL: single_scope: second thread: print i3 (PRMS: gdb/22214)
...
In both cases, the KFAIL is for omp_get_thread_num () == 1, but in one case
that corresponds to the first thread executing that bit of code, and in the
other case to the second thread.
Get rid of this difference by stabilizing execution order.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-07-20 Tom de Vries <tdevries@suse.de>
* gdb.threads/omp-par-scope.c (lock, lock2): New variable.
(omp_set_lock_in_order): New function.
(single_scope, multi_scope, nested_func, nested_parallel): Use
omp_set_lock_in_order and omp_unset_lock.
(main): Init and destroy lock and lock2.
H.J. Lu [Mon, 20 Jul 2020 11:53:58 +0000 (04:53 -0700)]
x86: Update PR gas/26263 linker tests
Update and run PR gas/26263 linker tests for all x86 ELF targets to
accept any program header layout.
PR gas/26263
* testsuite/ld-i386/pr26263.d: Updated.
* testsuite/ld-x86-64/pr26263.d: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run gas/26263 test for all ELF
targets.
Tom de Vries [Mon, 20 Jul 2020 09:19:51 +0000 (11:19 +0200)]
[gdb/testsuite] Fix valgrind-infcall-2.exp without libc debug info
When running test-case gdb.base/valgrind-infcall-2.exp on a system without
libc debug info installed, I run into:
...
(gdb) p printf ("bla")^M
'printf' has unknown return type; cast the call to its declared return type^M
(gdb) FAIL: gdb.base/valgrind-infcall-2.exp: do printf
...
Fix this by casting the result of the printf call to int.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-07-20 Tom de Vries <tdevries@suse.de>
* gdb.base/valgrind-infcall-2.exp: Handle printf unknown return type.
Tom de Vries [Mon, 20 Jul 2020 08:54:31 +0000 (10:54 +0200)]
[gdb/testsuite] Bail out after gdb_start error in gdb.threads/attach-slow-waitpid.exp
When building gdb using CFLAGS/CXXFLAGS+=-fsanitizer=address and
LDFLAGS+=-lasan, and running test-case gdb.threads/attach-slow-waitpid.exp,
we get:
...
spawn gdb -nw -nx -data-directory data-directory^M
==16079==ASan runtime does not come first in initial library list; \
you should either link runtime to your application or manually preload \
it with LD_PRELOAD.^M
ERROR: (eof) GDB never initialized.
ERROR: : spawn id exp10 not open
while executing
"expect {
-i exp10 -timeout 120
-re "Kill the program being debugged. .y or n. $" {
send_gdb "y\n" answer
verbose "\t\tKilling previous pro..."
("uplevel" body line 1)
invoked from within
"uplevel $body" NONE : spawn id exp10 not open
WARNING: remote_expect statement without a default case
ERROR: : spawn id exp10 not open
while executing
"expect {
-i exp10 -timeout 120
-re "Reading symbols from.*LZMA support was disabled.*$gdb_prompt $" {
verbose "\t\tLoaded $arg into $GDB; .gnu_..."
("uplevel" body line 1)
invoked from within
"uplevel $body" NONE : spawn id exp10 not open
ERROR: Couldn't load attach-slow-waitpid into GDB (eof).
ERROR: Couldn't send attach 16070 to GDB.
UNRESOLVED: gdb.threads/attach-slow-waitpid.exp: attach to target
...
Bail out at the first ERROR, such that we have instead:
...
ERROR: (eof) GDB never initialized.
UNTESTED: gdb.threads/attach-slow-waitpid.exp: \
Couldn't start GDB with preloaded lib
...
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-07-20 Tom de Vries <tdevries@suse.de>
* gdb.threads/attach-slow-waitpid.exp: Bail out if gdb_start fails.
Jan Beulich [Mon, 20 Jul 2020 06:57:18 +0000 (08:57 +0200)]
x86: handle SVR4 escaped binary operators
PR gas/4572
When / is a comment character, its use as binary "divide" operator needs
escaping by a backslash. Besides the scrubber needing to support this
(addressed in an earlier change), there are also a few provisions needed
in target specific operator handling.
As the spec calls for % and * to also be escaped because of being
"overloaded", also recognize these, despite the overloading there not
really preventing their use as operators in most (%) or all (*) cases,
given the way how the rest of the assembler works.
To bring source and testsuite in line, also drop the TE_I386AIX part of
the respective conditional, as i?86-*-aix* support had been removed a
while ago.
Jan Beulich [Mon, 20 Jul 2020 06:56:23 +0000 (08:56 +0200)]
gas: generalize comment character escaping recognition
PR gas/4572
Generalize what
ab1fadc6b2f0 ("PR22714, Assembler preprocessor loses
track of \@") did to always honor escaped comment chars. Use this then
to support escaped /, %, and * operators on x86, when / is a comment
char (to match the Sun assembler's behavior).
Jan Beulich [Mon, 20 Jul 2020 06:55:48 +0000 (08:55 +0200)]
x86: honor absolute section when emitting code
Various provisions exist for insns to be placed in the absolute section,
yet actually trying to do so didn't work. While data emission (of non-
zero values) is not allowed by generic code, I think this functionality
is useful for the programmer to be able to determine the size of insns.
Therefore, rather than turning the silnet failure into a verbose one,
make things mostly work; the one class of insns not supported (yet) are
branches (JMP and Jcc) with dynamically determined displacement widths.
In this one case, an error now gets reported instead of silently
ignoring the code.
Also avoid recording ISA / feature usage for insns emitted to the
absolute section.
Jan Beulich [Mon, 20 Jul 2020 06:54:37 +0000 (08:54 +0200)]
ix86: enable more ELF tests for VxWorks
The tree-wide is_elf_format predicate excludes VxWorks, but the majority
of ELF specific tests is quite fine for this target.
GDB Administrator [Mon, 20 Jul 2020 00:00:05 +0000 (00:00 +0000)]
Automatic date update in version.in
H.J. Lu [Sun, 19 Jul 2020 14:30:42 +0000 (07:30 -0700)]
gold: Update x32 test
* testsuite/split_x32.sh: Likewise.
H.J. Lu [Sun, 19 Jul 2020 14:14:47 +0000 (07:14 -0700)]
gold: Update x86-64 tests
commit
36938cabf0efcb053d1585e8580a4b3db438ca4e
Author: Jan Beulich <jbeulich@suse.com>
Date: Wed Jul 15 08:53:55 2020 +0200
x86: avoid attaching suffixes to unambiguous insns
removed the 'a' suffix on call and jmp from disassembler output. Update
gold x86-64 tests.
* testsuite/bnd_ifunc_1.sh: Updated.
* testsuite/bnd_plt_1.sh: Likewise.
* testsuite/split_x86_64.sh: Likewise.
* testsuite/x86_64_indirect_call_to_direct.sh: Likewise.
H.J. Lu [Sun, 19 Jul 2020 13:51:19 +0000 (06:51 -0700)]
x86: Change PLT32 reloc against section to PC32
Commit
292676c1 resolved PLT32 reloc aganst local symbol to section.
Since PLT32 relocation must be against symbols, turn such PLT32
relocation into PC32 relocation.
gas/
PR gas/26263
* config/tc-i386.c (i386_validate_fix): Change PLT32 reloc
against section to PC32 reloc.
* testsuite/gas/i386/relax-5.d: Updated.
* testsuite/gas/i386/x86-64-relax-4.d: Likewise.
ld/
PR gas/26263
* testsuite/ld-i386/i386.exp: Run PR gas/26263 test.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/pr26263.d: New file.
* testsuite/ld-x86-64/pr26263.d: Likewise.
* testsuite/ld-x86-64/pr26263.s: Likewise.
Hans-Peter Nilsson [Sun, 19 Jul 2020 04:08:07 +0000 (06:08 +0200)]
ld: optionally emit _etext last, before .data
So, here's my suggestion for making _init .. __etext cover .text +
.rodata (including things like the read-only exception tables) for
elf64mmix. A quick web search gives that __etext (and friends) isn't
well defined, so each target can interpret the "end of text segment"
to their own liking. It seems likely this change is also a better fit
than the default for other ports, at least those with .rodata after
.text in the same segment.
The presence of a separate rodata-segment is optional (and not true
for elf64mmix). This is reflected in the name as SEPARATE_TEXT /
SEPARATE_CODE isn't considered, to keep it simple; each target has to
make sure their settings of variables make sense.
ld:
* scripttempl/elf.sc (ETEXT_LAST_IN_RODATA_SEGMENT): New variable.
* emulparams/elf64mmix.sh (ETEXT_LAST_IN_RODATA_SEGMENT): Define.
* testsuite/ld-mmix/sec-1.d: Adjust.
Alan Modra [Fri, 17 Jul 2020 07:17:28 +0000 (16:47 +0930)]
Power10 stub selection
This patch better supports mixing of power10 and non-power10 code,
as might be seen in a cpu-optimized library using ifuncs to select
functions optimized for a given cpu. Using -Wl,--no-power10-stubs
isn't that good in this situation since non-power10 notoc stubs are
slower and larger than the power10 variants, which you'd like to use
on power10 code paths.
With this change, power10 pc-relative code that makes calls marked
@notoc uses power10 stubs if stubs are necessary, and other calls use
non-power10 instructions in stubs. This will mean that if gcc is
generating code for -mcpu=power10 but with pc-rel disabled then you'll
get the older stubs even on power10 (unless you force with
-Wl,--power10-stubs). That shouldn't be too big a problem: stubs that
use r2 are reasonable. It's just the ones that set up addressing
using "mflr 12; bcl 20,31,.+4; mflr 11; mtlr 12" that should be
avoided if possible.
bfd/
* elf64-ppc.c (struct ppc_link_hash_table): Add has_power10_relocs.
(select_alt_stub): New function.
(ppc_get_stub_entry): Use it here.
(ppc64_elf_check_relocs): Set had_power10_relocs rather than
power10_stubs.
(ppc64_elf_size_stubs): Clear power10_stubs here instead. Don't
merge notoc stubs with other varieties when power10_stubs is "auto".
Instead dup the stub hash table entry.
(plt_stub_size, ppc_build_one_stub, ppc_size_one_stub): Adjust
tests of power10_stubs.
ld/
* emultempl/ppc64elf.em (power10-stubs): Accept optional "auto" arg.
* ld.texi (power10-stubs): Update.
* testsuite/ld-powerpc/callstub-1.d: Force --power10-stubs.
* testsuite/ld-powerpc/callstub-2.d: Relax branch offset comparison.
* testsuite/ld-powerpc/callstub-4.d: New test.
* testsuite/ld-powerpc/notoc.d: Force --no-power10-stubs.
* testsuite/ld-powerpc/notoc3.d,
* testsuite/ld-powerpc/notoc3.s,
* testsuite/ld-powerpc/notoc3.wf: New test.
* testsuite/ld-powerpc/powerpc.exp: Run new tests. Pass
--no-power10-stubs for notoc link.
GDB Administrator [Sun, 19 Jul 2020 00:00:06 +0000 (00:00 +0000)]
Automatic date update in version.in
Tom Tromey [Sat, 18 Jul 2020 16:43:16 +0000 (10:43 -0600)]
Remove "linux_multi_process" global
The "linux_multi_process" is initialized but never modified. I
discussed this with Pedro on irc, and he said that, while it was
useful when developing this feature, it is now no longer needed. So,
this removes it.
gdb/ChangeLog
2020-07-18 Tom Tromey <tom@tromey.com>
* linux-nat.c (linux_multi_process): Remove.
(linux_nat_target::supports_multi_process): Return true.
GDB Administrator [Sat, 18 Jul 2020 00:00:06 +0000 (00:00 +0000)]
Automatic date update in version.in
Andrew Burgess [Thu, 16 Jul 2020 16:48:12 +0000 (17:48 +0100)]
gdb/riscv: delete target descriptions when gdb exits
It was pointed out on IRC that the RISC-V target allocates target
descriptions and stores them in a global map, and doesn't delete these
target descriptions when GDB shuts down.
This isn't a particular problem, the total number of target
descriptions we can create is very limited so creating these on demand
and holding them for the entire run on GDB seems reasonable.
However, not deleting these objects on GDB exit means extra warnings
are printed from tools like valgrind, and the address sanitiser,
making it harder to spot real issues. As it's reasonably easy to have
GDB correctly delete these objects on exit, lets just do that.
I started by noticing that we already have a target_desc_up type, a
wrapper around unique_ptr that calls a function that will correctly
delete target descriptions, so I want to use that, but....
...that type is declared in gdb/target-descriptions.h. If I try to
include that file in gdb/arch/riscv.c I run into a problem, that file
is compiled into both GDB and GDBServer.
OK, I could guard the include with #ifdef, but surely we can do
better.
So then I decided to move the target_desc_up type into
gdbsupport/tdesc.h, this is the interface file for generic code shared
between GDB and GDBserver (relating to target descriptions). The
actual implementation for the delete function still lives in
gdb/target-description.c, but now gdb/arch/riscv.c can see the
declaration. Problem solved....
... but, though RISC-V doesn't use it I've now exposed the
target_desc_up type to gdbserver, so in future someone _might_ start
using it, which is fine, except right now there's no definition of the
delete function - remember the delete I used is only defined in GDB
code.
No problem, I add an implementation of the delete operator into
gdbserver/tdesc.cc, and all is good..... except....
I start getting this error from GCC:
tdesc.cc:109:10: error: deleting object of polymorphic class type ‘target_desc’ which has non-virtual destructor might cause undefined behavior [-Werror=delete-non-virtual-dtor]
Which is caused because gdbserver's target_desc type inherits from
tdesc_element which has a virtual method, and so GCC worries that
target_desc might be used as a base class.
The solution is to declare gdbserver's target_desc class as final.
This is fine so long as we never intent to inherit from
target_desc (in gdbserver). But if we did then we'd want to make
target_desc's destructor virtual anyway, so the error above would be
resolved, and there wouldn't be an issue.
gdb/ChangeLog:
* arch/riscv.c (riscv_tdesc_cache): Change map type.
(riscv_lookup_target_description): Return pointer out of
unique_ptr.
* target-descriptions.c (allocate_target_description): Add
comment.
(target_desc_deleter::operator()): Likewise.
* target-descriptions.h (struct target_desc_deleter): Moved to
gdbsupport/tdesc.h.
(target_desc_up): Likewise.
gdbserver/ChangeLog:
* tdesc.cc (allocate_target_description): Add header comment.
(target_desc_deleter::operator()): New function.
* tdesc.h (struct target_desc): Declare as final.
gdbsupport/ChangeLog:
* tdesc.h (struct target_desc_deleter): Moved here
from gdb/target-descriptions.h, extend comment.
(target_desc_up): Likewise.
Tom de Vries [Fri, 17 Jul 2020 15:33:18 +0000 (17:33 +0200)]
[gdb/testsuite] Add gdb.base/valgrind-infcall-2.exp
In commit
ee3c5f8968 "Fix GDB crash when registers cannot be modified", we
fix a GDB crash:
...
$ valgrind /usr/bin/sleep 10000
==31595== Memcheck, a memory error detector
==31595== Command: /usr/bin/sleep 10000
==31595==
$ gdb /usr/bin/sleep
(gdb) target remote | vgdb --pid=31595
Remote debugging using | vgdb --pid=31595
...
$hex in __GI___nanosleep () at nanosleep.c:27
27 return SYSCALL_CANCEL (nanosleep, requested_time, remaining);
(gdb) p printf ("bla")
terminate called after throwing an instance of 'gdb_exception_error'
Aborted (core dumped)
...
This patch adds a test-case for it.
Unfortunately, I was not able to trigger the error condition using a regular
vgdb_start, so I've added a parameter active_at_startup, and when set to 0
this causes valgrind to be started without --vgdb-error=0.
Tested on x86_64-linux.
Tested with the commit mentioned above reverted, resulting in:
...
(gdb) p printf ("bla")^M
terminate called after throwing an instance of 'gdb_exception_error'^M
ERROR: GDB process no longer exists
GDB process exited with wait status 6152 exp10 0 0 CHILDKILLED SIGABRT SIGABRT
UNRESOLVED: gdb.base/valgrind-infcall-2.exp: do printf
...
gdb/testsuite/ChangeLog:
2020-07-17 Tom de Vries <tdevries@suse.de>
* gdb.base/valgrind-infcall-2.c: New test.
* gdb.base/valgrind-infcall-2.exp: New file.
* lib/valgrind.exp (vgdb_start): Add and handle active_at_startup.
Tom Tromey [Fri, 17 Jul 2020 15:20:33 +0000 (09:20 -0600)]
Use boolean literals in linux-nat.c
I noticed a couple of spots in linux-nat.c that use 0/1 where boolean
literals would be more idiomatic. This patch makes this change.
gdb/ChangeLog
2020-07-17 Tom Tromey <tromey@adacore.com>
* linux-nat.c (linux_nat_target::supports_non_stop)
(linux_nat_target::always_non_stop_p): Use "true".
(linux_nat_target::supports_disable_randomization): Use "true" and
"false".
Tom de Vries [Fri, 17 Jul 2020 14:42:37 +0000 (16:42 +0200)]
[gdb/testsuite] Use MACRO_AT_{func,range}
Use dwarf assembly procs MACRO_AT_func and MACRO_AT_range in test-cases where
that's appropriate.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-07-17 Tom de Vries <tdevries@suse.de>
* gdb.dlang/circular.c (found): Use found_label as label name.
* gdb.dwarf2/arr-subrange.c (main): Use main_label as label name.
* gdb.dwarf2/comp-unit-lang.c (func): Use func_label as label name.
* gdb.dlang/circular.exp: Use MACRO_AT_func and MACRO_AT_range.
* gdb.dwarf2/ada-linkage-name.exp: Same.
* gdb.dwarf2/arr-subrange.exp: Same.
* gdb.dwarf2/atomic-type.exp: Same.
* gdb.dwarf2/comp-unit-lang.exp: Same.
* gdb.dwarf2/cpp-linkage-name.exp: Same.
* gdb.dwarf2/dw2-bad-mips-linkage-name.exp: Same.
* gdb.dwarf2/dw2-lexical-block-bare.exp: Same.
* gdb.dwarf2/dw2-regno-invalid.exp: Same.
* gdb.dwarf2/implptr-64bit.exp: Same.
* gdb.dwarf2/imported-unit-abstract-const-value.exp: Same.
* gdb.dwarf2/imported-unit-runto-main.exp: Same.
* gdb.dwarf2/imported-unit.exp: Same.
* gdb.dwarf2/main-subprogram.exp: Same.
* gdb.dwarf2/missing-type-name.exp: Same.
* gdb.dwarf2/nonvar-access.exp: Same.
* gdb.dwarf2/struct-with-sig.exp: Same.
* gdb.dwarf2/typedef-void-finish.exp: Same.
* gdb.dwarf2/void-type.exp: Same.
Tom de Vries [Fri, 17 Jul 2020 12:35:44 +0000 (14:35 +0200)]
[gdb/testsuite] Drop src arg of MACRO_AT_{func,range}
The dwarf assembly procs MACRO_AT_func and MACRO_AT_range have a src
parameter, which is set to $srcdir/$subdir/$srcfile in every single call.
Drop the src parameter and hardcode usage of $srcdir/$subdir/$srcfile in the
procs.
Build and reg-tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-07-17 Tom de Vries <tdevries@suse.de>
* lib/dwarf.exp (Dwarf::MACRO_AT_func, Dwarf::MACRO_AT_range): Drop
src parameter.
* gdb.dlang/watch-loc.exp: Update MACRO_AT_{func,range} calls.
* gdb.dwarf2/bitfield-parent-optimized-out.exp: Same.
* gdb.dwarf2/dw2-ifort-parameter.exp: Same.
* gdb.dwarf2/dw2-opt-structptr.exp: Same.
* gdb.dwarf2/dwz.exp: Same.
* gdb.dwarf2/implptr-optimized-out.exp: Same.
* gdb.dwarf2/implref-array.exp: Same.
* gdb.dwarf2/implref-const.exp: Same.
* gdb.dwarf2/implref-global.exp: Same.
* gdb.dwarf2/implref-struct.exp: Same.
* gdb.dwarf2/info-locals-optimized-out.exp: Same.
* gdb.dwarf2/opaque-type-lookup.exp: Same.
* gdb.dwarf2/var-access.exp: Same.
* gdb.dwarf2/varval.exp: Same.
* gdb.trace/entry-values.exp: Same.
Tom de Vries [Fri, 17 Jul 2020 11:06:42 +0000 (13:06 +0200)]
[gdb/testsuite] Remove Dwarf::extern
The file lib/dwarf.exp contains:
...
# Declare a global label. This is typically used to refer to
# labels defined in other files, for example a function defined in
# a .c file.
proc extern {args} {
foreach name $args {
_op .global $name
}
}
...
The assembler directive to refer to labels defined in other files is
not .global, but .extern, and that one is ignored by gas.
Since we require gas for all dwarf assembly test-cases, remove the proc and
all it's uses.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-07-17 Tom de Vries <tdevries@suse.de>
* lib/dwarf.exp (Dwarf::extern): Remove.
* gdb.compile/compile-ops.exp: Remove use of Dwarf::extern.
* gdb.dlang/circular.exp: Same.
* gdb.dwarf2/comp-unit-lang.exp: Same.
* gdb.dwarf2/dw2-ifort-parameter.exp: Same.
* gdb.dwarf2/dw2-symtab-includes.exp: Same.
* gdb.dwarf2/dwz.exp: Same.
* gdb.dwarf2/imported-unit-abstract-const-value.exp: Same.
* gdb.dwarf2/imported-unit-runto-main.exp: Same.
* gdb.dwarf2/imported-unit.exp: Same.
* gdb.dwarf2/opaque-type-lookup.exp: Same.
GDB Administrator [Fri, 17 Jul 2020 00:00:07 +0000 (00:00 +0000)]
Automatic date update in version.in
Hans-Peter Nilsson [Thu, 16 Jul 2020 22:55:13 +0000 (00:55 +0200)]
mmix ld: move .init (and _init) first.
This both makes the section layout more similar to that of the general
default for ELF and fixes (makes true) an assumption that code and
rodata is located between _init and __etext, in
libgcc/config/mmix/crti.S. Sadly, that's not actually true for ELF
(generally and for elf64mmix), where exception-tables and .rodata is
after _etext; I'm pondering what to do about that.
The original mmix simulator behavior is that memory magically appears
on access, initialized with 0, which is not preferable when chasing
bugs by throwing code the size of the gcc test-suite to the simulator.
The code in crti.S compatibly enables simulator machinery to identify
undefined memory and instead stopping the simulator with an error
(going to interactive mode for interactive runs). See
http://gcc.gnu.org/legacy-ml/gcc-patches/2012-10/msg01871.html for
more, including the mmix-sim.ch "patch file".
This fixes only one error in the gcc testsuite,
gcc.c-torture/execute/pr20621-1.c with LTO, where for some reason
gcc/lto chooses to move (writable) data that is only used to read 0 to
.rodata. An access (sufficiently far inside a block) in an
unregistered place is flagged as an invalid access.
The bpo-9m test that I had to adjust, actually exposes a wart: mmo
does not have the notion of symbol types (or sections) and the
test-case now has leading zeros at "Main" eventually leading to it
being misdiagnosed as being outside .text and .data, thus here mapped
to BFD as an absolute symbol. The test is not intended to check the
mmo symbol-type machinery, so I'm just tweaking it to be
symbol-type-neutral for "Main".
Since you have to jump through hoops to see the problem, I don't think
this commit is worth putting on the 2.35-branch.
ld:
* scripttempt/mmo.sc: Move .init first in .text output section.
* testsuite/ld-mmix/bpo-9m.d: Adjust accordingly.
Sandra Loosemore [Thu, 16 Jul 2020 21:03:09 +0000 (14:03 -0700)]
Fix POSIX-isms in gdb.base/shell.exp
Some recent tests added to gdb.base/shell.exp have been failing on
Windows host due to assumptions that the shell is a POSIX variant. On
Windows, GDB uses CMD.EXE via the system() call to run shell commands
instead.
There seems to be no obvious CMD.EXE equivalent for "kill -2 $$" to
signal the shell process, so this patch skips those tests on Windows
host. The second problem addressed here is that CMD.EXE only
recognizes double quotes, not single quotes; that change can be made
unconditionally since POSIX shells recognize double quotes as well.
2020-07-16 Sandra Loosemore <sandra@codesourcery.com>
gdb/testsuite/
* gdb.base/shell.exp: Skip pipe tests dependent on sh on Windows host.
Use double quotes instead of single quotes.
Caroline Tice [Wed, 1 Jul 2020 19:39:08 +0000 (12:39 -0700)]
gdb: fix issues with handling DWARF v5 rnglists & .dwo files.
While experimenting with GDB on DWARF 5 with split debug (dwo files),
I discovered that GDB was not reading the rnglist index
properly (it needed to be reprocessed in the same way the loclist
index does), and that there was no code for reading rnglists out of
dwo files at all. Also, the rnglist address reading function
(dwarf2_rnglists_process) was adding the base address to all rnglist
entries, when it's only supposed to add it to the DW_RLE_offset_pair
entries (http://dwarfstd.org/doc/DWARF5.pdf, p. 53), and was not
handling several entry types.
- Added 'reprocessing' for reading rnglist index (as is done for loclist
index).
- Added code for reading rnglists out of .dwo files.
- Added several missing rnglist forms to dwarf2_rnglists_process.
- Fixed bug that was alwayas adding base address for rnglists (only
one form needs that).
- Updated dwarf2_rnglists_process to read rnglist out of dwo file when
appropriate.
- Added new functions cu_debug_rnglist_section & read_rnglist_index.
- Added new testcase, dw5-rnglist-test.{cc,exp}
Special note about the new testcase:
In order for the test case to test anything meaningful, it must be
compiled with clang, not GCC. The way to do this is as follows:
$ make check RUNTESTFLAGS="CC_FOR_TARGET=/path/to/clang CXX_FOR_TARGET=/path/to/clang++ dw5-rnglist-test.exp"
This following version of clang was used for this testing:
clang version 9.0.1-11
Target: x86_64-pc-linux-gnu
Thread model: posix
InstalledDir: /usr/bin
Change-Id: I3053c5ddc345720b8ed81e23a88fe537ab38748d
Tom de Vries [Thu, 16 Jul 2020 13:34:00 +0000 (15:34 +0200)]
[gdb/testsuite] Add pseudo line number program instruction: line
There's an idiom in dwarf assembly test-cases:
...
set line1 [gdb_get_line_number "line 1"]
set line2 [gdb_get_line_number "line 2"]
set line3 [gdb_get_line_number "line 3"]
...
{DW_LNS_advance_line [expr $line1 - 1]}
...
{DW_LNS_advance_line [expr $line2 - $line1]}
...
{DW_LNS_advance_line [expr $line3 - $line2]}
...
Add a pseudo line number program instruction "line", such that we can simply
write:
...
{line $line1}
...
{line $line2}
...
{line $line3}
...
Build and reg-tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-07-16 Tom de Vries <tdevries@suse.de>
* lib/dwarf.exp (program): Initialize _line.
(DW_LNE_end_sequence): Reinitialize _line.
(DW_LNS_advance_line): Update _line.
(line): New proc.
* gdb.dwarf2/dw2-inline-many-frames.exp: Use line.
* gdb.dwarf2/dw2-inline-small-func.exp: Same.
* gdb.dwarf2/dw2-inline-stepping.exp: Same.
* gdb.dwarf2/dw2-is-stmt-2.exp: Same.
* gdb.dwarf2/dw2-is-stmt.exp: Same.
* gdb.dwarf2/dw2-ranges-func.exp: Same.
GDB Administrator [Thu, 16 Jul 2020 00:00:06 +0000 (00:00 +0000)]
Automatic date update in version.in
Andrew Burgess [Wed, 15 Jul 2020 15:05:24 +0000 (16:05 +0100)]
gdb/testsuite: Update test pattern in ptype-on-functions.exp
It was pointed out that the recently added test
gdb.fortran/ptype-on-functions.exp fails on older versions of
gfortran. This is because the ABI for passing string lengths changed
from a 4-byte to 8-byte value (on some targets).
This change is documented here:
https://gcc.gnu.org/gcc-8/changes.html.
Character variables longer than HUGE(0) elements are now possible on
64-bit targets. Note that this changes the procedure call ABI for
all procedures with character arguments on 64-bit targets, as the
type of the hidden character length argument has changed. The hidden
character length argument is now of type INTEGER(C_SIZE_T).
This commit just relaxes the pattern to accept any size of integer for
the string length argument.
gdb/testsuite/ChangeLog:
* gdb.fortran/ptype-on-functions.exp: Make the result pattern more
generic.
H.J. Lu [Wed, 15 Jul 2020 13:49:45 +0000 (06:49 -0700)]
x86: Don't display eiz with no scale
Change
67 48 8b 1c 25 ef cd ab 89 mov 0x89abcdef(,%eiz,1),%rbx
to
67 48 8b 1c 25 ef cd ab 89 mov 0x89abcdef,%rbx
in AT&T syntax and
67 48 8b 1c 25 ef cd ab 89 mov rbx,QWORD PTR [eiz*1+0x89abcdef]
to
67 48 8b 1c 25 ef cd ab 89 mov rbx,QWORD PTR ds:0x89abcdef
in Intel syntax.
gas/
PR gas/26237
* testsuite/gas/i386/evex-no-scale-64.d: Updated.
* testsuite/gas/i386/addr32.d: Likewise.
* testsuite/gas/i386/x86-64-addr32-intel.d: Likewise.
* testsuite/gas/i386/x86-64-addr32.d: Likewise.
opcodes/
PR gas/26237
* i386-dis.c (OP_E_memory): Don't display eiz with no scale
without base nor index registers.
Nick Clifton [Wed, 15 Jul 2020 11:52:53 +0000 (12:52 +0100)]
Fix the generation of relocs for missing build notes.
* write.c (create_note_reloc): Add desc2_size parameter. Zero out
the addend field of REL relocations. Store the full addend into
the note for REL relocations.
Alan Modra [Wed, 15 Jul 2020 01:29:20 +0000 (10:59 +0930)]
PR26239, memory leak in _bfd_dwarf2_slurp_debug_info
PR 26239
* coffgen.c (_bfd_coff_close_and_cleanup): Free dwarf2 info.
Nick Clifton [Wed, 15 Jul 2020 10:09:59 +0000 (11:09 +0100)]
Fix an illegal memory access in the BFD library which can be triggered by attempting to parse a corrupt PE format file.
PR26240
* coffgen.c (coff_get_normalized_symtab): Fix off-by-one error in
check for aux entries that overflow the buufer.
Tom de Vries [Wed, 15 Jul 2020 09:17:41 +0000 (11:17 +0200)]
[gdb/testsuite] Handle callq -> call disassembly change
We're currently running into:
...
FAIL: gdb.trace/entry-values.exp: disassemble bar
...
Since commit
36938cabf0 "x86: avoid attaching suffixes to unambiguous insns",
"callq" is disassembled as "call", and the test-case expects "callq".
Fix this by expecting "call" instead.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-07-15 Tom de Vries <tdevries@suse.de>
* gdb.trace/entry-values.exp: Expect "call" instead of "callq" if
is_amd64_regs_target.
Andrew Burgess [Tue, 14 Jul 2020 09:10:07 +0000 (10:10 +0100)]
gdb/fortran: Handle dynamic string types when printing types
After commit:
commit
8c2e4e0689ea244d0ed979171a3d09c9176b8175
Date: Sun Jul 12 22:58:51 2020 -0400
gdb: add accessors to struct dynamic_prop
An existing bug was exposed in the Fortran type printing code. When
GDB is asked to print the type of a function that takes a dynamic
string argument GDB will try to read the upper bound of the string.
The read of the upper bound is written as:
if (type->bounds ()->high.kind () == PROP_UNDEFINED)
// Treat the upper bound as unknown.
else
// Treat the upper bound as known and constant.
However, this is not good enough. When printing a function type the
dynamic argument types will not have been resolved. As a result the
dynamic property is not PROP_UNDEFINED, but nor is it constant.
By rewriting this code to specifically check for the PROP_CONST case,
and treating all other cases as the upper bound being unknown we avoid
incorrectly treating the dynamic property as being constant.
gdb/ChangeLog:
* f-typeprint.c (f_type_print_base): Allow for dynamic types not
being resolved.
gdb/testsuite/ChangeLog:
* gdb.fortran/ptype-on-functions.exp: Add more tests.
* gdb.fortran/ptype-on-functions.f90: Likewise.
Jan Beulich [Wed, 15 Jul 2020 06:55:53 +0000 (08:55 +0200)]
x86: move putop() case labels to restore alphabetic sorting
... as far as non-fall-through behavior permits.
Jan Beulich [Wed, 15 Jul 2020 06:55:20 +0000 (08:55 +0200)]
x86: make PUSH/POP disassembly uniform
Irrespective of their encoding the resulting output should look the
same. Therefore wire the handling of PUSH/POP with GPR operands
encoded in the main opcode byte to the same logic used for other
operands. This frees up yet another macro character.
Jan Beulich [Wed, 15 Jul 2020 06:54:40 +0000 (08:54 +0200)]
x86-64: adjust stack insn test case
The value chosen for the 16-/32-bit immediate cases didn't work well
with the subsequent insn's REX prefix - we ought to pick a value the
upper two bytes of which evaluate to a 2-byte insn. Bump the values
accordingly, allowing the subsequent insn to actually have the intended
REX.W.
Jan Beulich [Wed, 15 Jul 2020 06:53:55 +0000 (08:53 +0200)]
x86: avoid attaching suffixes to unambiguous insns
"Unambiguous" is is in particular taking as reference the assembler,
which also accepts certain insns - despite them allowing for varying
operand size, and hence in principle being ambiguous - without any
suffix. For example, from the very beginning of the life of x86-64 I had
trouble understanding why a plain and simple RET had to be printed as
RETQ. In case someone really used the 16-bit form, RETW disambiguates
the two quite fine.
Hans-Peter Nilsson [Wed, 15 Jul 2020 04:22:28 +0000 (06:22 +0200)]
mmix bfd: fix bfd_assert for R_MMIX_PUSHJ_STUBBABLE against undef'd symbol
Spotted when inspecting gcc testsuite logs, but this already is
covered by the ld-mmix testsuite, it's just that the assert is ignored
since the regexp match is for a substring and not anchored.
With the anchors added but not the bugfix, the ld.log shows that the
asserts cause a non-match as intended:
Executing on host: sh -c {./ld-new -LX/src/ld/testsuite/ld-mmix -m elf64mmix -o tmpdir/dump tmpdir/undef-2.o tmpdir/start.o 2>&1} /dev/null dump.tmp (timeout = 300)
./ld-new: BFD (GNU Binutils) 2.34.50.
20200629 assertion fail X/src/bfd/elf64-mmix.c:2845
./ld-new: BFD (GNU Binutils) 2.34.50.
20200629 assertion fail X/src/bfd/elf64-mmix.c:2845
./ld-new: BFD (GNU Binutils) 2.34.50.
20200629 assertion fail X/src/bfd/elf64-mmix.c:2845
./ld-new: tmpdir/undef-2.o:(.text+0x0): undefined reference to `undefd'
failed with: <./ld-new: BFD (GNU Binutils) 2.34.50.
20200629 assertion fail X/src/bfd/elf64-mmix.c:2845
./ld-new: BFD (GNU Binutils) 2.34.50.
20200629 assertion fail X/src/bfd/elf64-mmix.c:2845
./ld-new: BFD (GNU Binutils) 2.34.50.
20200629 assertion fail X/src/bfd/elf64-mmix.c:2845
./ld-new: tmpdir/undef-2.o:(.text+0x0): undefined reference to `undefd'>, expected: <\A[^\n\r]*undefined reference to `undefd'\Z>
FAIL: ld-mmix/undef-2
Gone with the fix of course, leaving just the intended "undefined
reference" like.
I'm not going to add anchors manually for all the "error:" strings in
the test-suite, not even in the mmix parts. Sorry, but I'll just do
it for *these* specific undefined-reference tests.
Just a thought: maybe the run_dump_test "error:" string should
*automatically* get anchor marks prepended and appended for a single
line match as in the patch, "\A[^\n\r]*" prepended and \Z appended
unless either anchor mark or \r or \n is present in the regexp?
Committed.
bfd:
* elf64-mmix.c (mmix_elf_relax_section): Improve accounting for
R_MMIX_PUSHJ_STUBBABLE relocs against undefined symbols.
ld/testsuite:
* testsuite/ld-mmix/undef-1.d, testsuite/ld-mmix/undef-1m.d,
testsuite/ld-mmix/undef-2.d, testsuite/ld-mmix/undef-2m.d: Add
start- and end-anchors to error-string to match just a
single-line error-message.
Simon Marchi [Wed, 15 Jul 2020 03:18:01 +0000 (23:18 -0400)]
gdb/testsuite/lib/dwarf.exp: fix addr_size parameter comments
The comments modified in this patch claim that the addr_size parameters
can take the value 32 or 64 (suggesting the value is in bits). In fact,
the expected value is in bytes, either 4 or 8.
The actual value in the DWARF info is in bytes. And we can see that the
default values used (if addr_size == "default") are:
if {$_cu_addr_size == "default"} {
if {[is_64_target]} {
set _cu_addr_size 8
} else {
set _cu_addr_size 4
}
}
gdb/testsuite/ChangeLog:
* lib/dwarf.exp (Dwarf::cu, Dwarf::tu, Dwarf::lines): Change valid
values in documentation for addr_size to 4 and 8.
Change-Id: I4a02dca2bb7992198864e545ef099f020f54ff2f
GDB Administrator [Wed, 15 Jul 2020 00:00:06 +0000 (00:00 +0000)]
Automatic date update in version.in
Markus Böck [Tue, 14 Jul 2020 23:01:30 +0000 (08:31 +0930)]
PR26198 MinGW failure to link regular object file and LTO object file
PR 26198
* coffgen.c (_bfd_coff_section_already_linked): Allow for plugin
objects both before and after normal object files.
* elflink.c (_bfd_elf_section_already_linked): Likewise.
H.J. Lu [Tue, 14 Jul 2020 16:57:52 +0000 (09:57 -0700)]
x86-64: Zero-extend lower 32 bits displacement to 64 bits
Since the addr32 (0x67) prefix zero-extends the lower 32 bits address to
64 bits, change disassembler to zero-extend the lower 32 bits displacement
to 64 bits when there is no base nor index registers.
gas/
PR gas/26237
* testsuite/gas/i386/addr32.s: Add tests for 32-bit wrapped around
address.
* testsuite/gas/i386/x86-64-addr32.s: Likewise.
* testsuite/gas/i386/addr32.d: Updated.
* testsuite/gas/i386/x86-64-addr32-intel.d: Likewise.
* testsuite/gas/i386/x86-64-addr32.d: Likewise.
* testsuite/gas/i386/ilp32/x86-64-addr32-intel.d: Likewise.
* testsuite/gas/i386/ilp32/x86-64-addr32.d: Likewise.
opcodes/
PR gas/26237
* i386-dis.c (OP_E_memory): Without base nor index registers,
32-bit displacement to 64 bits.
Andrew Burgess [Fri, 3 Jul 2020 10:22:03 +0000 (11:22 +0100)]
gdb: Improve formatting of 'show endian' messages
This commit changes the output of 'show endian'. Here is a
session before this commit:
(gdb) show endian
The target endianness is set automatically (currently little endian)
(gdb) set endian big
The target is assumed to be big endian
(gdb) show endian
The target is assumed to be big endian
(gdb)
After this commit the session now looks like this:
(gdb) show endian
The target endianness is set automatically (currently little endian).
(gdb) set endian big
The target is set to big endian.
(gdb) show endian
The target is set to big endian.
(gdb)
The changes are:
1. Each line ends with '.', and
2. After setting the endianness GDB is now a little more assertive;
'target is set to' not 'target is assumed to be', the user did just
tell us after all!
Andrew Burgess [Thu, 25 Jun 2020 16:59:34 +0000 (17:59 +0100)]
gdb: Improve formatting of 'show architecture' messages
This commit changes the output of 'show architecture'. Here is a
session before this commit:
(gdb) show architecture
The target architecture is set automatically (currently i386)
(gdb) set architecture mips
The target architecture is assumed to be mips
(gdb) show architecture
The target architecture is assumed to be mips
(gdb)
After this commit the session now looks like this:
(gdb) show architecture
The target architecture is set to "auto" (currently "i386").
(gdb) set architecture mips
The target architecture is set to "mips".
(gdb) show architecture
The target architecture is set to "mips".
(gdb)
The changes are:
1. The value is now enclosed in quotes,
2. Each line ends with '.', and
3. After setting the architecture GDB is now a little more
assertive; 'architecture is set to' not 'is assumed to be', the user
did just tell us after all!
gdb/ChangeLog:
* arch-utils.c (show_architecture): Update formatting of messages.
gdb/testsuite/ChangeLog:
* gdb.arch/amd64-osabi.exp: Update.
* gdb.arch/arm-disassembler-options.exp: Update.
* gdb.arch/powerpc-disassembler-options.exp: Update.
* gdb.arch/ppc64-symtab-cordic.exp: Update.
* gdb.arch/s390-disassembler-options.exp: Update.
* gdb.base/all-architectures.exp.tcl: Update.
* gdb.base/attach-pie-noexec.exp: Update.
* gdb.base/catch-syscall.exp: Update.
* gdb.xml/tdesc-arch.exp: Update.
Claudiu Zissulescu [Tue, 14 Jul 2020 11:51:15 +0000 (14:51 +0300)]
arc: Detect usage of illegal double register pairs
ARC can use odd-even double register pairs in some selected
instructions. Although the GNU assembler doesn't allow even-odd
registers to be used, there may be cases when the disassembler is
presented with such situation. This patch add a test and detects such
cases.
opcodes/
2020-07-14 Claudiu Zissulescu <claziss@gmail.com>
* arc-dis.c (print_insn_arc): Detect and emit a warning when a
faulty double register pair is detected.
binutils/
2020-07-14 Claudiu Zissulescu <claziss@gmail.com>
* testsuite/binutils-all/arc/double_regs.s: New test.
* testsuite/binutils-all/arc/objdump.exp: Add the above test.
Signed-off-by: Claudiu Zissulescu <claziss@gmail.com>
Jan Beulich [Tue, 14 Jul 2020 08:43:38 +0000 (10:43 +0200)]
x86/Intel: debug registers are named DRn
%db<n> is an AT&T invention; the Intel documentation and MASM have only
ever specified DRn (in line with CRn and TRn). (In principle gas also
shouldn't accept the names in Intel mode, but at least for now I've kept
things as they are. Perhaps as a first step this should just be warned
about.)
Jan Beulich [Tue, 14 Jul 2020 08:43:03 +0000 (10:43 +0200)]
x86: drop Rm and the 'L' macro
Rm (and hence OP_R()) can be dropped by making 'Z' force modrm.mod to 3
(for OP_E()) instead of ignoring it. While at it move 'Z' handling to
its designated place (after 'Y'; 'W' handling will be moved by a later
change).
Moves to/from TRn are illegal in 64-bit mode and thus get converted to
honor this at the same time (also getting them in line with moves
to/from CRn/DRn ModRM.mod handling wise). This then also frees up the L
macro.
Jan Beulich [Tue, 14 Jul 2020 08:42:33 +0000 (10:42 +0200)]
x86: drop Rdq, Rd, and MaskR
Rdq, Rd, and MaskR can be replaced by Edq, Ed / Rm, and MaskE
respectively, as OP_R() doesn't enforce ModRM.mod == 3, and hence where
MOD matters but hasn't been decoded yet it needs to be anyway. (The case
of converting to Rm is temporary until a subsequent change.)
Jan Beulich [Tue, 14 Jul 2020 08:42:03 +0000 (10:42 +0200)]
x86: simplify decode of opcodes valid only without any (embedded) prefix
In this case there's no need to go through prefix_table[] at all - the
.prefix_requirement == PREFIX_OPCODE machinery takes care of this case
already.
A couple of further adjustments are needed though:
- Gv / Ev and alike then can't be used (needs to be Gdq / Edq instead),
- dq_mode and friends shouldn't lead to PREFIX_DATA getting set in
used_prefixes.
Jan Beulich [Tue, 14 Jul 2020 08:41:30 +0000 (10:41 +0200)]
x86: also use %BW / %DQ for kshift*
Tom de Vries [Tue, 14 Jul 2020 08:36:17 +0000 (10:36 +0200)]
[gdb/testsuite] Fix clone-new-thread-event.c with glibc 2.30
Starting glibc 2.30, unistd.h declares gettid (for _GNU_SOURCE).
This clashes with a static gettid in test source
clone-new-thread-event.c:
...
gdb compile failed, gdb.threads/clone-new-thread-event.c:46:1: error: \
static declaration of 'gettid' follows non-static declaration
46 | gettid (void)
| ^~~~~~
In file included from /usr/include/unistd.h:1170,
from gdb.threads/clone-new-thread-event.c:27:
/usr/include/bits/unistd_ext.h:34:16: note: previous declaration of 'gettid' \
was here
34 | extern __pid_t gettid (void) __THROW;
| ^~~~~~
...
Fix this by renaming the static gettid to local_gettid.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-07-14 Tom de Vries <tdevries@suse.de>
* gdb.threads/clone-new-thread-event.c (gettid): Rename to ...
(local_gettid): ... this.
(fn): Update.
Jan Beulich [Tue, 14 Jul 2020 08:33:40 +0000 (10:33 +0200)]
x86: simplify decode of opcodes valid with (embedded) 66 prefix only
The only valid (embedded or explicit) prefix being the data size one
(which is a fairly common pattern), avoid going through prefix_table[].
Instead extend the "required prefix" logic to also handle PREFIX_DATA
alone in a table entry, now used to identify this case. This requires
moving the (adjusted) ->prefix_requirement logic ahead of the printing
of stray prefixes, as the latter needs to observe the new setting of
PREFIX_DATA in used_prefixes.
Also add PREFIX_OPCODE on related entries when previously there was
mistakenly no decode step through prefix_table[].
This page took 0.056304 seconds and 4 git commands to generate.