Matt Carlson [Mon, 28 Nov 2011 09:41:03 +0000 (09:41 +0000)]
tg3: Fix TSO CAP for 5704 devs w / ASF enabled
On the earliest TSO capable devices, TSO was accomplished through
firmware. The TSO cannot coexist with ASF management firmware though.
The tg3 driver determines whether or not ASF is enabled by calling
tg3_get_eeprom_hw_cfg(), which checks a particular bit of NIC memory.
Commit
dabc5c670d3f86d15ee4f42ab38ec5bd2682487d, entitled "tg3: Move
TSO_CAPABLE assignment", accidentally moved the code that determines
TSO capabilities earlier than the call to tg3_get_eeprom_hw_cfg(). As a
consequence, the driver was attempting to determine TSO capabilities
before it had all the data it needed to make the decision.
This patch fixes the problem by revisiting and reevaluating the decision
after tg3_get_eeprom_hw_cfg() is called.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 28 Nov 2011 05:25:02 +0000 (05:25 +0000)]
sch_sfb: use skb_flow_dissect()
Current SFB double hashing is not fulfilling SFB theory, if two flows
share same rxhash value.
Using skb_flow_dissect() permits to really have better hash dispersion,
and get tunnelling support as well.
Double hashing point was mentioned by Florian Westphal
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 28 Nov 2011 05:24:18 +0000 (05:24 +0000)]
cls_flow: use skb_flow_dissect()
Instead of using a custom flow dissector, use skb_flow_dissect() and
benefit from tunnelling support.
This lack of tunnelling support was mentioned by Dan Siemon.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 28 Nov 2011 05:23:23 +0000 (05:23 +0000)]
net: use skb_flow_dissect() in __skb_get_rxhash()
No functional changes.
This uses the code we factorized in skb_flow_dissect()
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 28 Nov 2011 05:22:18 +0000 (05:22 +0000)]
net: introduce skb_flow_dissect()
We use at least two flow dissectors in network stack, with known
limitations and code duplication.
Introduce skb_flow_dissect() to factorize this, highly inspired from
existing dissector from __skb_get_rxhash()
Note : We extensively use skb_header_pointer(), this permits us to not
touch skb at all.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yaniv Rosner [Mon, 28 Nov 2011 00:49:53 +0000 (00:49 +0000)]
bnx2x: Change value comparison order
Change comparison order such that the variable will come before the compared value.
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yaniv Rosner [Mon, 28 Nov 2011 00:49:52 +0000 (00:49 +0000)]
bnx2x: Cosmetic changes
Fix spelling, alignment, empty lines, relocate the is_4_port_mode function, and split bnx2x_link_status_update function.
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yaniv Rosner [Mon, 28 Nov 2011 00:49:51 +0000 (00:49 +0000)]
bnx2x: Fix self test of BCM57800
Fix the MAC test of the 1G port of the BCM57800 to use the UMAC instead of the XMAC.
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yaniv Rosner [Mon, 28 Nov 2011 00:49:50 +0000 (00:49 +0000)]
bnx2x: Add known PHY type check
The populate function will fail in case an unknown external PHY is detected.
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yaniv Rosner [Mon, 28 Nov 2011 00:49:49 +0000 (00:49 +0000)]
bnx2x: Change Warpcore MDIO work around mode
This patch enables the usage of simpler MDC/MDIO work-around when accessing Warpcore registers.
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yaniv Rosner [Mon, 28 Nov 2011 00:49:48 +0000 (00:49 +0000)]
bnx2x: Fix BCM84833 link and LED behavior
This patch contain several fixes for the BCM84833. This PHY is still not in bnx2x production, hence this patch can be considered as enhancement.
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yaniv Rosner [Mon, 28 Nov 2011 00:49:47 +0000 (00:49 +0000)]
bnx2x: Warpcore HW reset following fan failure
Put Warpcore in low power mode in case of fan failure to reduce heat.
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yaniv Rosner [Mon, 28 Nov 2011 00:49:46 +0000 (00:49 +0000)]
bnx2x: ETS changes
Fix a problem when new traffic class is created with 0% BW, the ETS is not conforming.
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yaniv Rosner [Mon, 28 Nov 2011 00:49:45 +0000 (00:49 +0000)]
bnx2x: PFC changes
Change BRB to work in per class guaranteed mode and handle cases for BW 0%.
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 28 Nov 2011 00:27:47 +0000 (00:27 +0000)]
tcp: tcp_sendmsg() wrong access to sk_route_caps
Now sk_route_caps is u64, its dangerous to use an integer to store
result of an AND operator. It wont work if NETIF_F_SG is moved on the
upper part of u64.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Axel Lin [Mon, 28 Nov 2011 01:29:11 +0000 (20:29 -0500)]
net/irda: convert drivers/net/irda/* to use module_platform_driver()
This patch converts the drivers in drivers/net/irda/* to use the
module_platform_driver() macro which makes the code smaller and a bit
simpler.
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Neal Cardwell [Wed, 16 Nov 2011 08:58:05 +0000 (08:58 +0000)]
tcp: skip cwnd moderation in TCP_CA_Open in tcp_try_to_open
The problem: Senders were overriding cwnd values picked during an undo
by calling tcp_moderate_cwnd() in tcp_try_to_open().
The fix: Don't moderate cwnd in tcp_try_to_open() if we're in
TCP_CA_Open, since doing so is generally unnecessary and specifically
would override a DSACK-based undo of a cwnd reduction made in fast
recovery.
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Neal Cardwell [Wed, 16 Nov 2011 08:58:04 +0000 (08:58 +0000)]
tcp: allow undo from reordered DSACKs
Previously, SACK-enabled connections hung around in TCP_CA_Disorder
state while snd_una==high_seq, just waiting to accumulate DSACKs and
hopefully undo a cwnd reduction. This could and did lead to the
following unfortunate scenario: if some incoming ACKs advance snd_una
beyond high_seq then we were setting undo_marker to 0 and moving to
TCP_CA_Open, so if (due to reordering in the ACK return path) we
shortly thereafter received a DSACK then we were no longer able to
undo the cwnd reduction.
The change: Simplify the congestion avoidance state machine by
removing the behavior where SACK-enabled connections hung around in
the TCP_CA_Disorder state just waiting for DSACKs. Instead, when
snd_una advances to high_seq or beyond we typically move to
TCP_CA_Open immediately and allow an undo in either TCP_CA_Open or
TCP_CA_Disorder if we later receive enough DSACKs.
Other patches in this series will provide other changes that are
necessary to fully fix this problem.
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Neal Cardwell [Wed, 16 Nov 2011 08:58:03 +0000 (08:58 +0000)]
tcp: use SACKs and DSACKs that arrive on ACKs below snd_una
The bug: When the ACK field is below snd_una (which can happen when
ACKs are reordered), senders ignored DSACKs (preventing undo) and did
not call tcp_fastretrans_alert, so they did not increment
prr_delivered to reflect newly-SACKed sequence ranges, and did not
call tcp_xmit_retransmit_queue, thus passing up chances to send out
more retransmitted and new packets based on any newly-SACKed packets.
The change: When the ACK field is below snd_una (the "old_ack" goto
label), call tcp_fastretrans_alert to allow undo based on any
newly-arrived DSACKs and try to send out more packets based on
newly-SACKed packets.
Other patches in this series will provide other changes that are
necessary to fully fix this problem.
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Neal Cardwell [Wed, 16 Nov 2011 08:58:02 +0000 (08:58 +0000)]
tcp: use DSACKs that arrive when packets_out is 0
The bug: Senders ignored DSACKs after recovery when there were no
outstanding packets (a common scenario for HTTP servers).
The change: when there are no outstanding packets (the "no_queue" goto
label), call tcp_fastretrans_alert() in order to use DSACKs to undo
congestion window reductions.
Other patches in this series will provide other changes that are
necessary to fully fix this problem.
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Neal Cardwell [Wed, 16 Nov 2011 08:58:01 +0000 (08:58 +0000)]
tcp: make is_dupack a parameter to tcp_fastretrans_alert()
Allow callers to decide whether an ACK is a duplicate ACK. This is a
prerequisite to allowing fastretrans_alert to be called from new
contexts, such as the no_queue and old_ack code paths, from which we
have extra info that tells us whether an ACK is a dupack.
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Amir Vadai [Sat, 26 Nov 2011 19:55:23 +0000 (19:55 +0000)]
net/mlx4_en: bug fix for the case of vlan id 0 and UP 0
When using vlan 0 and UP 0, vlan header wasn't placed.
Signed-off-by: Amir Vadai <amirv@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
Amir Vadai [Sat, 26 Nov 2011 19:55:19 +0000 (19:55 +0000)]
net/mlx4_en: adding loopback support
Device must be in promiscuous mode or DMAC must be same as the host MAC, or
else packet will be dropped by the HW rx filtering.
Signed-off-by: Amir Vadai <amirv@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
Oren Duer [Sat, 26 Nov 2011 19:55:15 +0000 (19:55 +0000)]
net/mlx4_en: fix WOL handlers were always looking at port2 capability bit
There are 2 capability bits for WOL, one for each port.
WOL handlers were looking only on the second bit, regardless of the port.
Signed-off-by: Oren Duer <oren@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yevgeny Petrilin [Sat, 26 Nov 2011 19:55:10 +0000 (19:55 +0000)]
net/mlx4_en: using non collapsed CQ on TX
Moving to regular Completion Queue implementation (not collapsed)
Completion for each transmitted packet is written to new entry.
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
Or Gerlitz [Sat, 26 Nov 2011 19:55:06 +0000 (19:55 +0000)]
net/mlx4_en: fix sparse warning on a cast which truncates bits from constant value
the MLX4_EN_WOL_DO_MODIFY flag which is defined through enum targets
bit 63, this triggers a "cast truncate bits from constant value
(
8000000000000000 becomes 0)" warning from sparse, fix that by using
define instead of enum.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Or Gerlitz [Sat, 26 Nov 2011 19:55:02 +0000 (19:55 +0000)]
net/mlx4: fix UDP RSS related settings
Using RSS which takes into account UDP headers is controlled by
a module param, fix the setting of the HW RSS context to align
with that scheme. So far it was uncoditionally allowing hashing
on the UDP headers.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Or Gerlitz [Sat, 26 Nov 2011 19:54:58 +0000 (19:54 +0000)]
net/mlx4: move RSS related definitions to be global
Towards adding RSS support for IB drivers/application who use
the mlx4 HW, make the RSS related definitions global and change
the mlx4_en driver to use them.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tilman Schmidt [Sun, 27 Nov 2011 07:39:22 +0000 (07:39 +0000)]
isdn/gigaset: report ISDN4Linux interface only once
Move the "ISDN4Linux interface" message from device registration,
where it is emitted for each device, to driver registration, where
it is emitted only once, for consistency with the CAPI variant.
Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 26 Nov 2011 21:54:17 +0000 (16:54 -0500)]
ifenslave: Fix unused variable warnings.
Documentation/networking/ifenslave.c: In function ‘if_getconfig’:
Documentation/networking/ifenslave.c:508:14: warning: variable ‘mtu’ set but not used [-Wunused-but-set-variable]
Documentation/networking/ifenslave.c:508:6: warning: variable ‘metric’ set but not used [-Wunused-but-set-variable]
The purpose of this function is to simply print out the values
it probes, so...
Signed-off-by: David S. Miller <davem@davemloft.net>
chas williams - CONTRACTOR [Tue, 22 Nov 2011 12:51:56 +0000 (12:51 +0000)]
atm: eliminate atm_guess_pdu2truesize()
Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rick Jones [Mon, 21 Nov 2011 09:28:17 +0000 (09:28 +0000)]
virtio_net: return already tracked tx_fifo_errors via virtnet_getstats()
Tx_fifo_errors are tracked in start_xmit_ for virtio_net, but not
reported in the tallies returned by virtnet_stats(). Return them
as the rx "sub-stats" rx_length_errors and rx_frame_errors are.
Signed-off-by: Rick Jones <rick.jones2@hp.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 26 Nov 2011 20:41:29 +0000 (15:41 -0500)]
ray_cs: Fix array bounds warnings.
rx_msg is defined to have a 1 entry array at the end, so gcc warns:
drivers/net/wireless/ray_cs.c: In function ‘rx_authenticate’:
drivers/net/wireless/ray_cs.c:2436:3: warning: array subscript is above array bounds [-Warray-bounds]
drivers/net/wireless/ray_cs.c:2436:3: warning: array subscript is above array bounds [-Warray-bounds]
drivers/net/wireless/ray_cs.c:2436:3: warning: array subscript is above array bounds [-Warray-bounds]
drivers/net/wireless/ray_cs.c:2436:3: warning: array subscript is above array bounds [-Warray-bounds]
drivers/net/wireless/ray_cs.c:2436:3: warning: array subscript is above array bounds [-Warray-bounds]
drivers/net/wireless/ray_cs.c:2439:15: warning: array subscript is above array bounds [-Warray-bounds]
drivers/net/wireless/ray_cs.c:2452:16: warning: array subscript is above array bounds [-Warray-bounds]
drivers/net/wireless/ray_cs.c:2453:18: warning: array subscript is above array bounds [-Warray-bounds]
drivers/net/wireless/ray_cs.c:2453:32: warning: array subscript is above array bounds [-Warray-bounds]
Use a zero length array and rename to "ray_rx_msg" to make sure we hit all
of the necessary cases.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 26 Nov 2011 20:35:10 +0000 (15:35 -0500)]
airo: Fix array bounds warning when moving packet payload.
drivers/net/wireless/airo.c: In function ‘encapsulate’:
drivers/net/wireless/airo.c:1421:15: warning: array subscript is above array bounds [-Warray-bounds]
drivers/net/wireless/airo.c: In function ‘decapsulate’:
drivers/net/wireless/airo.c:1509:16: warning: array subscript is above array bounds [-Warray-bounds]
Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Dooks [Mon, 21 Nov 2011 08:58:00 +0000 (08:58 +0000)]
KSZ8851-SNL: Add ethtool support for EEPROM via eeprom_93cx6
Add ethtool EEPROM read/write support using the eeprom_93cx6
library instead of open-coding the functions.
Depends on eeprom_93cx6 driver getting EEPROM write support.
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Simtec Linux Team <linux@simtec.co.uk>
[sboyd@codeaurora.org: Removed previous eeprom implementation]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tristram Ha [Mon, 21 Nov 2011 08:57:59 +0000 (08:57 +0000)]
KSZ8851-SNL: Fix MAC address change problem
When device is off it is under power saving mode. Changing the MAC address
in that situation will result in the device not communicating as the first
write to the MAC address register is not executed.
Signed-off-by: Tristram Ha <Tristram.Ha@micrel.com>
[ben@simtec.co.uk: cleaned up header]
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Dooks [Mon, 21 Nov 2011 08:57:58 +0000 (08:57 +0000)]
KSZ8851-SNL: Add support for EEPROM MAC address
Add support for reading the MAC address from the system registers if there
is an EEPROM present. This involves caching the KS_CCR register for later
use (will also be useful for ETHTOOL support) and adding a print to say
that there is an EEPROM present.
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Dooks [Mon, 21 Nov 2011 08:57:57 +0000 (08:57 +0000)]
eeprom_93cx6: Add write support
Add support for writing data to EEPROM.
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Linux Kernel <linux-kernel@vger.kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Dooks [Mon, 21 Nov 2011 08:57:56 +0000 (08:57 +0000)]
eeprom_93cx6: Add data direction control.
Some devices need to know if the data is to be output or read, so add a
data direction into the eeprom structure to tell the driver whether the
data line should be driven.
The user in this case is the Micrel KS8851 which has a direction
control for the EEPROM data line and thus needs to know whether
to drive it (writing) or to tristate it for receiving.
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Padmanabh Ratnakar [Fri, 25 Nov 2011 05:48:53 +0000 (05:48 +0000)]
be2net: Fix non utilization of RX queues
When non power of two MSIX vectors are given to driver, some RX queues
are not utilized. Program RSS table in such a way that all queues
are utilized.
Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Padmanabh Ratnakar [Fri, 25 Nov 2011 05:48:38 +0000 (05:48 +0000)]
be2net: Use new hash key
This new hash key gives better distribution of packets across RX
queues.
Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Padmanabh Ratnakar [Fri, 25 Nov 2011 05:48:23 +0000 (05:48 +0000)]
be2net: Add error handling for Lancer
Detect error in Lancer by polling a HW register and
recover from this error if it is recoverable.
Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Padmanabh Ratnakar [Fri, 25 Nov 2011 05:48:06 +0000 (05:48 +0000)]
be2net: Fix error recovery paths
When TX queues are created again after error recovery,
netif_set_real_num_tx_queues() is invoked to update number of real
TX queues created. rtnl lock needs to be held when invoking this routine.
Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Padmanabh Ratnakar [Fri, 25 Nov 2011 05:47:26 +0000 (05:47 +0000)]
be2net: Move to new SR-IOV implementation in Lancer
SR-IOV implementation is Lancer has changed in following ways -
1)PF driver assigns one MAC addresses for VF using COMMON_SET_IFACE_MAC_LIST.
2)VF driver queries its MAC address using COMMON_GET_IFACE_MAC_LIST command
and assigns it to its interface.
Signed-off-by: Mammatha Edhala <mammatha.edhala@emulex.com>
Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Hutchings [Thu, 24 Nov 2011 08:16:21 +0000 (08:16 +0000)]
bonding: Remove obsolete source file 'bond_ipv6.c'
This file is now unused and should have been removed by commit
7c89943236750537d26421d9bbb6f6575e2d1e1b ("bonding, ipv4, ipv6, vlan:
Handle NETDEV_BONDING_FAILOVER like NETDEV_NOTIFY_PEERS").
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Hutchings [Fri, 25 Nov 2011 14:40:26 +0000 (14:40 +0000)]
net: Use IS_ENABLED() in netdevice.h as appropriate
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Hutchings [Fri, 25 Nov 2011 14:38:38 +0000 (14:38 +0000)]
dsa: Allow core and drivers to be built as modules
Change the kconfig types to tristate and adjust the condition for
declaring net_device::dsa_ptr to allow for this.
Adjust the makefile so that if NET_DSA_MV88E6123_61_65=y and
NET_DSA_MV88E6131=m or vice versa then both drivers are built-in. We
could leave these options as bool and make NET_DSA_MV88E6XXX a
user-selected option, but that would break existing configurations.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Hutchings [Fri, 25 Nov 2011 14:37:16 +0000 (14:37 +0000)]
dsa: Define module author, description, license and aliases for drivers
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Hutchings [Fri, 25 Nov 2011 14:36:19 +0000 (14:36 +0000)]
mv88e6xxx: Combine mv88e6131 and mv88e612_61_65 drivers
These drivers share a lot of code, so if we make them modular they
should be built into the same module. Therefore, link them together
and merge their respective module init and exit functions.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Hutchings [Fri, 25 Nov 2011 14:35:02 +0000 (14:35 +0000)]
dsa: Combine core and tagging code
These files have circular dependencies, so if we make DSA modular then
they must be built into the same module. Therefore, link them
together and merge their respective module init and exit functions.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Hutchings [Fri, 25 Nov 2011 14:34:07 +0000 (14:34 +0000)]
dsa: Export functions from core to modules
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Hutchings [Fri, 25 Nov 2011 14:32:52 +0000 (14:32 +0000)]
dsa: Change dsa_uses_{dsa, trailer}_tags() into inline functions
eth_type_trans() will use these functions if DSA is enabled, which
blocks building DSA as a module.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 26 Nov 2011 19:47:03 +0000 (14:47 -0500)]
Merge git://git./linux/kernel/git/davem/net
Conflicts:
net/ipv4/inet_diag.c
Ben Hutchings [Fri, 25 Nov 2011 14:40:02 +0000 (14:40 +0000)]
net: Revert ARCNET and PHYLIB to tristate options
commit
88491d8103498a6166f70d5999902fec70924314 ("drivers/net: Kconfig
& Makefile cleanup") changed the type of these options to bool, but
they select code that could (and still can) be built as modules.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert [Wed, 23 Nov 2011 02:14:50 +0000 (02:14 +0000)]
ipv4: Don't use the cached pmtu informations for input routes
The pmtu informations on the inetpeer are visible for output and
input routes. On packet forwarding, we might propagate a learned
pmtu to the sender. As we update the pmtu informations of the
inetpeer on demand, the original sender of the forwarded packets
might never notice when the pmtu to that inetpeer increases.
So use the mtu of the outgoing device on packet forwarding instead
of the pmtu to the final destination.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert [Wed, 23 Nov 2011 02:14:15 +0000 (02:14 +0000)]
route: struct rtable can be const in rt_is_input_route and rt_is_output_route
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert [Wed, 23 Nov 2011 02:13:31 +0000 (02:13 +0000)]
net: Move mtu handling down to the protocol depended handlers
We move all mtu handling from dst_mtu() down to the protocol
layer. So each protocol can implement the mtu handling in
a different manner.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert [Wed, 23 Nov 2011 02:12:51 +0000 (02:12 +0000)]
net: Rename the dst_opt default_mtu method to mtu
We plan to invoke the dst_opt->default_mtu() method unconditioally
from dst_mtu(). So rename the method to dst_opt->mtu() to match
the name with the new meaning.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert [Wed, 23 Nov 2011 02:12:13 +0000 (02:12 +0000)]
route: Use the device mtu as the default for blackhole routes
As it is, we return null as the default mtu of blackhole routes.
This may lead to a propagation of a bogus pmtu if the default_mtu
method of a blackhole route is invoked. So return dst->dev->mtu
as the default mtu instead.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 26 Nov 2011 19:26:24 +0000 (14:26 -0500)]
Merge branch 'for_david' of git://git.open-mesh.org/linux-merge
Jorge Boncompte [DTI2] [Fri, 25 Nov 2011 18:24:49 +0000 (13:24 -0500)]
netns: fix proxy ARP entries listing on a netns
Skip entries from foreign network namespaces.
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Wed, 23 Nov 2011 21:18:20 +0000 (21:18 +0000)]
net/netlabel: copy and paste bug in netlbl_cfg_unlbl_map_add()
This was copy and pasted from the IPv4 code. We're calling the
ip4 version of that function and map4 is NULL.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Axel Lin [Thu, 24 Nov 2011 05:41:55 +0000 (00:41 -0500)]
net: mv643xx_eth: fix build error
Fix below build error:
CC drivers/net/ethernet/marvell/mv643xx_eth.o
drivers/net/ethernet/marvell/mv643xx_eth.c: In function 'mv643xx_eth_get_drvinfo':
drivers/net/ethernet/marvell/mv643xx_eth.c:1505: error: 'info' undeclared (first use in this function)
drivers/net/ethernet/marvell/mv643xx_eth.c:1505: error: (Each undeclared identifier is reported only once
drivers/net/ethernet/marvell/mv643xx_eth.c:1505: error: for each function it appears in.)
make[4]: *** [drivers/net/ethernet/marvell/mv643xx_eth.o] Error 1
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Li Wei [Tue, 22 Nov 2011 23:33:10 +0000 (23:33 +0000)]
ipv4: Save nexthop address of LSRR/SSRR option to IPCB.
We can not update iph->daddr in ip_options_rcv_srr(), It is too early.
When some exception ocurred later (eg. in ip_forward() when goto
sr_failed) we need the ip header be identical to the original one as
ICMP need it.
Add a field 'nexthop' in struct ip_options to save nexthop of LSRR
or SSRR option.
Signed-off-by: Li Wei <lw@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Anton Blanchard [Wed, 23 Nov 2011 00:13:54 +0000 (00:13 +0000)]
ehea: Use round_jiffies_relative to align workqueue
Use round_jiffies_relative to align the ehea workqueue and avoid
extra wakeups.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Anton Blanchard [Wed, 23 Nov 2011 00:13:02 +0000 (00:13 +0000)]
ehea: Reduce memory usage in buffer pools
Now that we enable multiqueue by default the ehea driver is using
quite a lot of memory for its buffer pools. With 4 queues we
consume 64MB in the jumbo packet ring, 16MB in the medium packet
ring and 16MB in the tiny packet ring.
We should only fill the jumbo ring once the MTU is increased but
for now halve it's size so it consumes 32MB. Also reduce the tiny
packet ring, with 4 queues we had 16k entries which is overkill.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thadeu Lima de Souza Cascardo [Wed, 23 Nov 2011 13:10:42 +0000 (13:10 +0000)]
qlge: fix size of external list for TX address descriptors
When transmiting a fragmented skb, qlge fills a descriptor with the
fragment addresses, after DMA-mapping them. If there are more than eight
fragments, it will use the eighth descriptor as a pointer to an external
list. After mapping this external list, called OAL to a structure
containing more descriptors, it fills it with the extra fragments.
However, considering that systems with pages larger than 8KiB would have
less than 8 fragments, which was true before commit
a715dea3c8e, it
defined a macro for the OAL size as 0 in those cases.
Now, if a skb with more than 8 fragments (counting skb->data as one
fragment), this would start overwriting the list of addresses already
mapped and would make the driver fail to properly unmap the right
addresses on architectures with pages larger than 8KiB.
Besides that, the list of mappings was one size too small, since it must
have a mapping for the maxinum number of skb fragments plus one for
skb->data and another for the OAL. So, even on architectures with page
sizes 4KiB and 8KiB, a skb with the maximum number of fragments would
make the driver overwrite its counter for the number of mappings, which,
again, would make it fail to unmap the mapped DMA addresses.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yaniv Rosner [Wed, 23 Nov 2011 03:54:08 +0000 (03:54 +0000)]
bnx2x: Fix 5461x LED
Fix port identify test on 5461x PHY by driving LEDs through MDIO.
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 23 Nov 2011 07:09:32 +0000 (07:09 +0000)]
net: treewide use of RCU_INIT_POINTER
rcu_assign_pointer(ptr, NULL) can be safely replaced by
RCU_INIT_POINTER(ptr, NULL)
(old rcu_assign_pointer() macro was testing the NULL value and could
omit the smp_wmb(), but this had to be removed because of compiler
warnings)
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jun Zhao [Tue, 22 Nov 2011 17:19:03 +0000 (17:19 +0000)]
ipv4 : igmp : fix error handle in ip_mc_add_src()
When add sources to interface failure, need to roll back the sfcount[MODE]
to before state. We need to match it corresponding.
Acked-by: David L Stevens <dlstevens@us.ibm.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Jun Zhao <mypopydev@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 23 Nov 2011 22:29:23 +0000 (17:29 -0500)]
ipv6: tcp: fix tcp_v6_conn_request()
Since linux 2.6.26 (commit
c6aefafb7ec6 : Add IPv6 support to TCP SYN
cookies), we can drop a SYN packet reusing a TIME_WAIT socket.
(As a matter of fact we fail to send the SYNACK answer)
As the client resends its SYN packet after a one second timeout, we
accept it, because first packet removed the TIME_WAIT socket before
being dropped.
This probably explains why nobody ever noticed or complained.
Reported-by: Jesse Young <jlyo@jlyo.org>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xander Hover [Wed, 23 Nov 2011 21:40:31 +0000 (16:40 -0500)]
b44: Use dev_kfree_skb_irq() in b44_tx()
Reported issues when using dev_kfree_skb() on UP systems and
systems with low numbers of cores. dev_kfree_skb_irq() will
properly save IRQ state before freeing the skb.
Tested on 3.1.1 and 3.2_rc2
Example of reproducible trace of kernel 3.1.1
------------[ cut here ]------------
WARNING: at kernel/softirq.c:159 local_bh_enable+0x32/0x79()
...
Pid: 0, comm: swapper Not tainted 3.1.1-gentoo #1
Call Trace:
[<
c1022970>] warn_slowpath_common+0x65/0x7a
[<
c102699e>] ? local_bh_enable+0x32/0x79
[<
c1022994>] warn_slowpath_null+0xf/0x13
[<
c102699e>] local_bh_enable+0x32/0x79
[<
c134bfd8>] destroy_conntrack+0x7c/0x9b
[<
c134890b>] nf_conntrack_destroy+0x1f/0x26
[<
c132e3a6>] skb_release_head_state+0x74/0x83
[<
c132e286>] __kfree_skb+0xb/0x6b
[<
c132e30a>] consume_skb+0x24/0x26
[<
c127c925>] b44_poll+0xaa/0x449
[<
c1333ca1>] net_rx_action+0x3f/0xea
[<
c1026a44>] __do_softirq+0x5f/0xd5
[<
c10269e5>] ? local_bh_enable+0x79/0x79
<IRQ> [<
c1026c32>] ? irq_exit+0x34/0x8d
[<
c1003628>] ? do_IRQ+0x74/0x87
[<
c13f5329>] ? common_interrupt+0x29/0x30
[<
c1006e18>] ? default_idle+0x29/0x3e
[<
c10015a7>] ? cpu_idle+0x2f/0x5d
[<
c13e91c5>] ? rest_init+0x79/0x7b
[<
c15c66a9>] ? start_kernel+0x297/0x29c
[<
c15c60b0>] ? i386_start_kernel+0xb0/0xb7
---[ end trace
583f33bb1aa207a9 ]---
Signed-off-by: Xander Hover <LKML@hover.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 23 Nov 2011 21:07:00 +0000 (16:07 -0500)]
netfilter: Remove NOTRACK/RAW dependency on NETFILTER_ADVANCED.
Distributions are using this in their default scripts, so don't hide
them behind the advanced setting.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Neil Horman [Wed, 23 Nov 2011 20:52:58 +0000 (15:52 -0500)]
netprio_cgroup: Fix build break
I broke the build with the addition of netprio_cgroups if CONFIG_CGROUPS=n.
This patch corrects it by moving the offending struct into an ifdef
CONFIG_CGROUPS block. Also clean up a few needless defines and inline functions
that don't get called if CONFIG_CGROUPS isn't defined while Im at it.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 23 Nov 2011 20:49:31 +0000 (15:49 -0500)]
ipv6: tcp: fix panic in SYN processing
commit
72a3effaf633bc ([NET]: Size listen hash tables using backlog
hint) added a bug allowing inet6_synq_hash() to return an out of bound
array index, because of u16 overflow.
Bug can happen if system admins set net.core.somaxconn &
net.ipv4.tcp_max_syn_backlog sysctls to values greater than 65536
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Li Wei [Wed, 23 Nov 2011 08:51:54 +0000 (03:51 -0500)]
ipv6: fix a bug in ndisc_send_redirect
Release skb when transmit rate limit _not_ allow
Signed-off-by: Li Wei <lw@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
John W. Linville [Tue, 22 Nov 2011 21:46:55 +0000 (16:46 -0500)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless into for-davem
Eric Dumazet [Tue, 22 Nov 2011 10:57:41 +0000 (10:57 +0000)]
net: remove netdev_alloc_page and use __GFP_COLD
Given we dont use anymore the struct net_device *dev argument, and this
interface brings litle benefit, remove netdev_{alloc|free}_page(), to
debloat include/linux/skbuff.h a bit.
(Some drivers used a mix of these interfaces and alloc_pages())
When allocating a page given to device for DMA transfer (device to
memory), it makes sense to use a cold one (__GFP_COLD)
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
CC: Dimitris Michailidis <dm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rick Jones [Mon, 21 Nov 2011 10:54:05 +0000 (10:54 +0000)]
Sweep away N/A fw_version dustbunnies from the .get_drvinfo routine of a number of drivers
Per discussion with Ben Hutchings and David Miller, go through and
remove assignments of "N/A" to fw_version in various drivers'
.get_drvinfo routines. While there clean-up some use of bare
constants and such.
Signed-off-by: Rick Jones <rick.jones2@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexey Dobriyan [Mon, 21 Nov 2011 03:39:03 +0000 (03:39 +0000)]
net: remove ipv6_addr_copy()
C assignment can handle struct in6_addr copying.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
John W. Linville [Tue, 22 Nov 2011 21:38:19 +0000 (16:38 -0500)]
Revert "rt2800pci: handle spurious interrupts"
This reverts commit
4ba7d9997869d25bd223dea7536fc1ce9fab3b3b.
The original patch was a misguided attempt to improve performance on
some hardware that is apparently prone to spurious interrupt generation.
Signed-off-by: John W. Linville <linville@tuxdriver.com>
stephen hemminger [Mon, 21 Nov 2011 06:53:46 +0000 (06:53 +0000)]
tc: comment spelling fixes
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
John W. Linville [Tue, 22 Nov 2011 21:36:35 +0000 (16:36 -0500)]
Revert "rt2x00: handle spurious pci interrupts"
This reverts commit
23085d5796561625db4143a671f1de081f66ef08.
The original patch was a misguided attempt to improve performance on
some hardware that is apparently prone to spurious interrupt generation.
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Feng King [Mon, 21 Nov 2011 01:47:11 +0000 (01:47 +0000)]
net: correct comments of skb_shift
when skb_shift, we want to shift paged data from skb to tgt frag area.
Original comments revert the shift order
Signed-off-by: Feng King <kinwin2008@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jorge Boncompte [DTI2] [Mon, 21 Nov 2011 10:25:58 +0000 (10:25 +0000)]
atm: Allow MSG_PEEK for atm sockets
Now that the vcc backends do the right thing with respect the receive
queue on registration, allow MSK_PEEK for atm sockets.
This allows a userspace program to inspect the packets and decide what
backend to use to handle them.
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jorge Boncompte [DTI2] [Mon, 21 Nov 2011 10:25:57 +0000 (10:25 +0000)]
atm: Introduce vcc_process_recv_queue
This function moves the implementation found in the clip and br2684
modules to common code, correctly unlinks the skb from the queue
before pushing it and makes pppoatm use it.
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jorge Boncompte [DTI2] [Mon, 21 Nov 2011 10:25:56 +0000 (10:25 +0000)]
atm: clip: move clip_devs check to clip_push
This will allow further cleanup.
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jorge Boncompte [DTI2] [Mon, 21 Nov 2011 10:25:55 +0000 (10:25 +0000)]
atm: clip: Don't move counters backwards
I don't see the point on substracting the skb len from the netdev
stats.
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jorge Boncompte [DTI2] [Mon, 21 Nov 2011 10:25:54 +0000 (10:25 +0000)]
atm: br2684: Do not move counters backwards
This snippet has caused several bugs in the past, and I don't see the
point on substracting the skb len from netdev stats.
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Maciej Żenczykowski [Tue, 22 Nov 2011 21:03:10 +0000 (16:03 -0500)]
net-netlink: fix diag to export IPv4 tos for dual-stack IPv6 sockets
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matt Carlson [Mon, 21 Nov 2011 15:01:20 +0000 (15:01 +0000)]
tg3: Add MDI-X reporting
This patch adds MDI-X state reporting.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matt Carlson [Mon, 21 Nov 2011 15:01:19 +0000 (15:01 +0000)]
tg3: Restrict large prod ring cap devices
Future devices may or may not be capable of supporting larger rx
producer rings. This patch changes the code so that this flag is set on
an ASIC rev to ASIC rev basis. Also, this patch changes a place where
the LRG_PROD_RING_CAP flag was not controlling how the rx standard
producer ring size was set.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matt Carlson [Mon, 21 Nov 2011 15:01:18 +0000 (15:01 +0000)]
tg3: Adjust BD replenish thresholds
The BD replenish thresholds for the 57765 and newer ASIC revs are a
little strict. They were tuned for a mode that is currently unused.
This patch relaxes the thresholds so that they are set to values more
inline with the resources available.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matt Carlson [Mon, 21 Nov 2011 15:01:17 +0000 (15:01 +0000)]
tg3: Make 1000Base-X FC resolution look like 1000T
This patch changes tg3's 1000Base-X flow control resolution to look like
the 1000Base-T flow control resolution code.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Meyer [Thu, 17 Nov 2011 12:43:40 +0000 (12:43 +0000)]
CDC NCM: Use kzalloc rather than kmalloc followed by memset with 0
This considers some simple cases that are common and easy to validate
Note in particular that there are no ...s in the rule, so all of the
matched code has to be contiguous
The semantic patch that makes this change is available
in scripts/coccinelle/api/alloc/kzalloc-simple.cocci.
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexey Dobriyan [Tue, 22 Nov 2011 06:46:02 +0000 (06:46 +0000)]
xfrm: optimize ipv4 selector matching
Current addr_match() is errh, under-optimized.
Compiler doesn't know that memcmp() branch doesn't trigger for IPv4.
Also, pass addresses by value -- they fit into register.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Neil Horman [Tue, 22 Nov 2011 05:10:52 +0000 (05:10 +0000)]
net: add documentation for net_prio cgroups (v4)
Add the requisite documentation to explain to new users how net_prio cgroups work
Signed-off-by:Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
CC: Robert Love <robert.w.love@intel.com>
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Neil Horman [Tue, 22 Nov 2011 05:10:51 +0000 (05:10 +0000)]
net: add network priority cgroup infrastructure (v4)
This patch adds in the infrastructure code to create the network priority
cgroup. The cgroup, in addition to the standard processes file creates two
control files:
1) prioidx - This is a read-only file that exports the index of this cgroup.
This is a value that is both arbitrary and unique to a cgroup in this subsystem,
and is used to index the per-device priority map
2) priomap - This is a writeable file. On read it reports a table of 2-tuples
<name:priority> where name is the name of a network interface and priority is
indicates the priority assigned to frames egresessing on the named interface and
originating from a pid in this cgroup
This cgroup allows for skb priority to be set prior to a root qdisc getting
selected. This is benenficial for DCB enabled systems, in that it allows for any
application to use dcb configured priorities so without application modification
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
CC: Robert Love <robert.w.love@intel.com>
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hiroaki SHIMODA [Tue, 22 Nov 2011 04:05:41 +0000 (04:05 +0000)]
tg3: Fix advertisement handling
Commit
28011cf19b (net: Add ethtool to mii advertisment conversion
helpers) added a helper function ethtool_adv_to_mii_100bt() and
tg3_copper_is_advertising_all(), tg3_phy_autoneg_cfg() were
modified to use this.
Before that commit, ethtool to mii advertisement conversion was
done wrt speed, but now pause operation is also taken account.
So, in tg3_copper_is_advertising_all(), below condition becomes
true and this makes link up fails.
if ((adv_reg & ADVERTISE_ALL) != all_mask)
return 0;
To fix this add ADVERTISE_ALL bit and operation to cap speed,
and change default advertisement not including ADVERTISED_Pause.
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Hiroaki SHIMODA <shimoda.hiroaki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 21 Nov 2011 19:51:34 +0000 (19:51 +0000)]
atm: use SKB_TRUESIZE() in atm_guess_pdu2truesize()
SKB_TRUESIZE() provides a better approximation of expected skb truesize.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This page took 0.04599 seconds and 5 git commands to generate.