K. Richard Pixley [Thu, 23 May 1991 03:49:53 +0000 (03:49 +0000)]
Macro'd everything, tightened masks.
K. Richard Pixley [Thu, 23 May 1991 03:49:10 +0000 (03:49 +0000)]
new sparc-opcode, new pinsn.
Roland Pesch [Thu, 23 May 1991 01:22:06 +0000 (01:22 +0000)]
* Makefile.dist, doc/gdb.texinfo, doc/*-m4.texinfo: split up GDB
docn into separate sections---basically chapters, plus two loose
pieces that can be configured to go in different places. This
allows GNU m4 to preprocess the manual without coredumping.
* Makefile.dist: tell TeX where to find texinfo.
Roland Pesch [Thu, 23 May 1991 00:35:54 +0000 (00:35 +0000)]
Move definition of \manvers back into gdb.texinfo (had been captured
in gdb.top-m4 when files were split), for continuity in version
numbering: the version of the manual is the version of the layout file.
(By R. Pesch fiat).
Roland Pesch [Thu, 23 May 1991 00:14:26 +0000 (00:14 +0000)]
*** empty log message ***
Steve Chamberlain [Wed, 22 May 1991 15:04:00 +0000 (15:04 +0000)]
Not only compiles, but spells _do_getl64 right too
Steve Chamberlain [Wed, 22 May 1991 14:59:10 +0000 (14:59 +0000)]
* libbfd.c: Now compiles
* coffcode.h: removed all put_x_<sizes>
Steve Chamberlain [Wed, 22 May 1991 14:27:39 +0000 (14:27 +0000)]
*** empty log message ***
Steve Chamberlain [Wed, 22 May 1991 14:26:59 +0000 (14:26 +0000)]
Changed #ifdef __GNUC__ to #ifdef HOST_64_BIT
Added DEFUNS
K. Richard Pixley [Wed, 22 May 1991 01:44:06 +0000 (01:44 +0000)]
remove gdb until config issues resolve.
K. Richard Pixley [Wed, 22 May 1991 01:40:35 +0000 (01:40 +0000)]
Oops.
K. Richard Pixley [Wed, 22 May 1991 01:30:56 +0000 (01:30 +0000)]
Added stage stuff.
K. Richard Pixley [Wed, 22 May 1991 01:18:42 +0000 (01:18 +0000)]
v9 stuff.
Steve Chamberlain [Tue, 21 May 1991 20:19:08 +0000 (20:19 +0000)]
Removed #define obstack_alloc xmalloc pending correct solution
Steve Chamberlain [Tue, 21 May 1991 20:18:12 +0000 (20:18 +0000)]
Fixed multiple definition of put_16 and get_16
K. Richard Pixley [Tue, 21 May 1991 19:55:06 +0000 (19:55 +0000)]
Initial revision
Steve Chamberlain [Tue, 21 May 1991 16:05:19 +0000 (16:05 +0000)]
Removed the V9 comment
Steve Chamberlain [Tue, 21 May 1991 16:04:48 +0000 (16:04 +0000)]
Removed bfd_h_get_x
Steve Chamberlain [Tue, 21 May 1991 15:59:33 +0000 (15:59 +0000)]
Changed obstack_chunk_alloc to xmalloc
Steve Chamberlain [Tue, 21 May 1991 15:57:42 +0000 (15:57 +0000)]
*** empty log message ***
John Gilmore [Tue, 21 May 1991 03:08:37 +0000 (03:08 +0000)]
Add target_defaulted to bfd struct. Fix formatting in various places.
Fix some obsolete comments. Remove macros for obsolete bfd_symbol_value,
bfd_symbol_name, bfd_get_first_symbol, bfd_get_next_symbol,
bfd_classify_symbol, bfd_symbol_hasclass.
Steve Chamberlain [Tue, 21 May 1991 00:14:16 +0000 (00:14 +0000)]
*** empty log message ***
Steve Chamberlain [Mon, 20 May 1991 23:15:15 +0000 (23:15 +0000)]
Mon May 20 16:14:07 1991 Steve Chamberlain (steve at cygint.cygnus.com)
* Changed some types to work with 64 bit object files
Roland Pesch [Mon, 20 May 1991 19:19:41 +0000 (19:19 +0000)]
* Makefile.dist, doc/gdb.texinfo: respectively create, and use,
the new target "rdl-apps.texinfo" which captures the Makefile
variable that records where to find the Readline libraries.
Roland Pesch [Mon, 20 May 1991 19:17:48 +0000 (19:17 +0000)]
*** empty log message ***
John Gilmore [Mon, 20 May 1991 01:37:08 +0000 (01:37 +0000)]
The one that shipped with 3.5.
John Gilmore [Mon, 20 May 1991 01:25:36 +0000 (01:25 +0000)]
Final versions used to make gdb-3.95 release.
John Gilmore [Mon, 20 May 1991 00:15:48 +0000 (00:15 +0000)]
More prep for final 3.95 release.
John Gilmore [Mon, 20 May 1991 00:08:39 +0000 (00:08 +0000)]
Fix nits found in attempting a Tahoe port.
John Gilmore [Sun, 19 May 1991 22:34:40 +0000 (22:34 +0000)]
Initial revision
John Gilmore [Sun, 19 May 1991 22:30:22 +0000 (22:30 +0000)]
Add Vax-BSD and Tahoe-BSD support.
John Gilmore [Sun, 19 May 1991 17:18:55 +0000 (17:18 +0000)]
Update for release 3.95. Readline is independent. Add assorted
files that were missed since the last release.
John Gilmore [Sun, 19 May 1991 17:13:32 +0000 (17:13 +0000)]
Update comment; these are for SVR3.2, not SVR2.
John Gilmore [Sun, 19 May 1991 17:11:52 +0000 (17:11 +0000)]
Add tahoe and i386sco targets; update comments in i386v32 targets.
John Gilmore [Sun, 19 May 1991 17:11:51 +0000 (17:11 +0000)]
Initial revision
John Gilmore [Sun, 19 May 1991 16:09:01 +0000 (16:09 +0000)]
Add rev #
John Gilmore [Sun, 19 May 1991 16:01:39 +0000 (16:01 +0000)]
update for release
John Gilmore [Sun, 19 May 1991 15:26:27 +0000 (15:26 +0000)]
Initial revision
John Gilmore [Sun, 19 May 1991 15:21:15 +0000 (15:21 +0000)]
* config.gdb: Don't create readline dir in subdir builds.
* main.c: Include with "..." form for non-system include files,
so "gcc -MM" for "make depend" works.
Include readline files with "...h" rather than <readline/...h>.
John Gilmore [Sun, 19 May 1991 15:08:57 +0000 (15:08 +0000)]
Update from Rich's damage and try for a releasable directory.
Minor Bothner changes.
John Gilmore [Sun, 19 May 1991 14:58:25 +0000 (14:58 +0000)]
Check in one built with "config.gdb none" rather than "config.gdb sparc".
Also includes a few changes around readline dependencies.
John Gilmore [Sun, 19 May 1991 14:57:22 +0000 (14:57 +0000)]
* Makefile.dist: Fix Rich damage; undo "configure" changes in
favor of keeping the (working) config.gdb. Move readline
library up a notch.
John Gilmore [Sun, 19 May 1991 14:52:42 +0000 (14:52 +0000)]
Update for readline split.
John Gilmore [Sun, 19 May 1991 12:51:09 +0000 (12:51 +0000)]
Undo rich's "avoid compiling the module that doesn't compile, so I
can claim that it configures and builds" change.
John Gilmore [Sun, 19 May 1991 12:49:37 +0000 (12:49 +0000)]
* sparc-xdep.c (deferred_stores): Repair minor damage by Rich.
Move deferred_stores to top of file, but don't separate its
#define's from its variable. Add commentary.
K. Richard Pixley [Sun, 19 May 1991 08:44:48 +0000 (08:44 +0000)]
Config polish.
K. Richard Pixley [Sun, 19 May 1991 08:05:16 +0000 (08:05 +0000)]
Merged in gdb changes.
K. Richard Pixley [Sun, 19 May 1991 08:00:57 +0000 (08:00 +0000)]
Updated to relect a gdb change in sparc-opcode.h.
K. Richard Pixley [Sun, 19 May 1991 08:00:11 +0000 (08:00 +0000)]
Added gdb.
K. Richard Pixley [Sun, 19 May 1991 07:27:02 +0000 (07:27 +0000)]
configure changes and -opcode.h movement.
K. Richard Pixley [Sun, 19 May 1991 00:36:45 +0000 (00:36 +0000)]
Added gdb.
K. Richard Pixley [Sun, 19 May 1991 00:32:13 +0000 (00:32 +0000)]
Changes to deal with missing subdirs gracefully, and changes dictated
from dropping configure over gdb.
K. Richard Pixley [Sun, 19 May 1991 00:19:54 +0000 (00:19 +0000)]
Initial revision
K. Richard Pixley [Sun, 19 May 1991 00:16:46 +0000 (00:16 +0000)]
Configure for gdb.
Steve Chamberlain [Sat, 18 May 1991 03:08:59 +0000 (03:08 +0000)]
*** empty log message ***
Steve Chamberlain [Sat, 18 May 1991 02:58:02 +0000 (02:58 +0000)]
Initial revision
Steve Chamberlain [Sat, 18 May 1991 02:57:45 +0000 (02:57 +0000)]
*** empty log message ***
K. Richard Pixley [Sat, 18 May 1991 02:44:28 +0000 (02:44 +0000)]
Gas buys into ../include. Files merged.
K. Richard Pixley [Sat, 18 May 1991 02:15:32 +0000 (02:15 +0000)]
Buying into ../include and ../libiberty.
K. Richard Pixley [Sat, 18 May 1991 01:01:09 +0000 (01:01 +0000)]
mkdep is not a standard tool nor do we support or install it.
Assuming it's existence kills config, make, and install.
K. Richard Pixley [Sat, 18 May 1991 00:53:02 +0000 (00:53 +0000)]
Using gcc here screws config and debugging something awful.
Roland Pesch [Fri, 17 May 1991 23:19:08 +0000 (23:19 +0000)]
*** empty log message ***
Roland Pesch [Fri, 17 May 1991 23:17:56 +0000 (23:17 +0000)]
Added readline/inc-readline.texinfo and readline/inc-history.texinfo
to the list of dependencies for the target "gdb.dvi".
Roland Pesch [Fri, 17 May 1991 22:53:05 +0000 (22:53 +0000)]
*** empty log message ***
Roland Pesch [Fri, 17 May 1991 22:52:47 +0000 (22:52 +0000)]
* readline/inc-history.texinfo, readline/inc-readline.texinfo:
applied various small fixes due to or inspired by RMS comments
Roland Pesch [Fri, 17 May 1991 21:43:25 +0000 (21:43 +0000)]
*** empty log message ***
Roland Pesch [Fri, 17 May 1991 21:43:01 +0000 (21:43 +0000)]
* doc/gdb.texinfo: finished using all RMS comments, save those for
appendices on readline and cmd history (which are in other source
files)
John Gilmore [Fri, 17 May 1991 19:49:37 +0000 (19:49 +0000)]
Bothner
Roland Pesch [Fri, 17 May 1991 01:14:04 +0000 (01:14 +0000)]
*** empty log message ***
Roland Pesch [Fri, 17 May 1991 01:10:52 +0000 (01:10 +0000)]
* doc/gdb.texinfo: (1) Updated w/ref to RMS comments through
chapter 9; (2) documented 'break' command's menu mode for
overloaded names, in response to hgs problem report C++ p-31
Roland Pesch [Thu, 16 May 1991 04:09:54 +0000 (04:09 +0000)]
*** empty log message ***
Roland Pesch [Thu, 16 May 1991 04:09:30 +0000 (04:09 +0000)]
Divert specialized startup
instructions to "Targets" chapter for generic manuals, while
leaving them up front for manuals specific to specialized
environments; apply fixes from RMS comments through chapter 4.
Roland Pesch [Thu, 16 May 1991 02:20:20 +0000 (02:20 +0000)]
*** empty log message ***
Roland Pesch [Thu, 16 May 1991 02:16:27 +0000 (02:16 +0000)]
(1) new Appendix, Renamed Commands;
(2) new leading subsection, Contributors to GDB
Roland Pesch [Thu, 16 May 1991 00:46:44 +0000 (00:46 +0000)]
*** empty log message ***
Roland Pesch [Thu, 16 May 1991 00:46:09 +0000 (00:46 +0000)]
* gdb.texinfo: (1) better introductory example; (2) more
consistent use of @code, @samp, @file, @kbd throughout; small
cleanups to first three nodes.
Roland Pesch [Wed, 15 May 1991 18:11:10 +0000 (18:11 +0000)]
*** empty log message ***
Roland Pesch [Wed, 15 May 1991 18:10:40 +0000 (18:10 +0000)]
Wed May 15 11:02:48 1991 Roland H. Pesch (pesch at fowanton.cygnus.com)
* pretex.m4: modify explanatory text slightly (and redefine
"regexp") to keep GNU m4 from complaining. (It still crashes
later, but one step at a time...)
John Gilmore [Wed, 15 May 1991 17:36:32 +0000 (17:36 +0000)]
readline update
John Gilmore [Wed, 15 May 1991 17:30:02 +0000 (17:30 +0000)]
Fix duplicated entry in ChangeLog.
Roland Pesch [Tue, 14 May 1991 23:34:41 +0000 (23:34 +0000)]
* Makefile.dist: put gdb.dvi stuff (updated to use M4 preprocessor
stuff for config manual) here where it counts; updated
to use new subdir structure (gdb/doc/).
* Makefile: generated from above via
config.gdb none
before checkin
Roland Pesch [Tue, 14 May 1991 22:34:12 +0000 (22:34 +0000)]
(1) removed "gdb.info*" files (just introduced) from CVS;
(2) instead,
* gdbint.texinfo: added instructions on generating gdb.info* files
locally for release.
Roland Pesch [Tue, 14 May 1991 22:07:52 +0000 (22:07 +0000)]
* gdb.info*: added to distribution. These are ordinary info
files, formatted from gdb.texinfo (via gdb-all.texinfo, see
Makefile)---but due to use of texinfo 2, can't count on makeinfo
to generate these, so we distribute them already formatted.
* gdb.texinfo: included full Info node and menu crud (as generated
by C-u M-x texinfo-master-menu using the texinfo-2 elisp code).
* Makefile: updated "gdb.dvi" target to use M4 preprocessor;
put in comments-for-future gdb.info target (one day makeinfo will
work again).
Roland Pesch [Tue, 14 May 1991 22:01:19 +0000 (22:01 +0000)]
*** empty log message ***
Roland Pesch [Tue, 14 May 1991 20:55:08 +0000 (20:55 +0000)]
*** empty log message ***
Steve Chamberlain [Tue, 14 May 1991 18:53:33 +0000 (18:53 +0000)]
Added make dep
Made filenames suitable for PCs
Steve Chamberlain [Tue, 14 May 1991 18:52:40 +0000 (18:52 +0000)]
Fixed problem with default output filename
Steve Chamberlain [Tue, 14 May 1991 17:33:03 +0000 (17:33 +0000)]
*** empty log message ***
Steve Chamberlain [Tue, 14 May 1991 17:32:59 +0000 (17:32 +0000)]
Initial revision
K. Richard Pixley [Tue, 14 May 1991 16:30:22 +0000 (16:30 +0000)]
ar called through parametarizable macro.
Steve Chamberlain [Tue, 14 May 1991 14:40:39 +0000 (14:40 +0000)]
C
:wq
q
VS: ----------------------------------------------------------------------
K. Richard Pixley [Tue, 14 May 1991 14:14:40 +0000 (14:14 +0000)]
see devo/configure 1.11
K. Richard Pixley [Tue, 14 May 1991 14:09:59 +0000 (14:09 +0000)]
Many small changes including the removal of configure.template. Any
valid configure script can now be used as a template.
John Gilmore [Mon, 13 May 1991 23:44:37 +0000 (23:44 +0000)]
Update "make saber_gdb" a bit.
John Gilmore [Mon, 13 May 1991 21:59:43 +0000 (21:59 +0000)]
* mipsread.c: Rather than keeping count of how many symtabs
and psymtabs we have, for sorting purposes, count them when
we need to sort. This fixes bug in rereading of symbol tables.
Steve Chamberlain [Mon, 13 May 1991 21:03:08 +0000 (21:03 +0000)]
*** empty log message ***
Steve Chamberlain [Mon, 13 May 1991 21:02:56 +0000 (21:02 +0000)]
* sunos.c: (choose_reloc_size) added: (sunos4_callback) calls
choose_reloc_size. (sunos4_write_object_contents) now calls
choose_reloc_size so outputs relocs correctly, also calculates the
size of the sections correctly.
* aout.c: (look in the \ 1rrgs I hate VI)
~
~
~
~
\10\10
Steve Chamberlain [Mon, 13 May 1991 20:26:24 +0000 (20:26 +0000)]
*** empty log message ***
Steve Chamberlain [Mon, 13 May 1991 19:56:07 +0000 (19:56 +0000)]
*** empty log message ***
Steve Chamberlain [Mon, 13 May 1991 18:47:30 +0000 (18:47 +0000)]
Now use a.out-sunos rather than a.out-generic
This page took 0.037165 seconds and 4 git commands to generate.