Dave Airlie [Mon, 26 Jan 2015 23:01:09 +0000 (09:01 +1000)]
Merge tag 'drm-intel-next-2015-01-17' of git://anongit.freedesktop.org/drm-intel into drm-next
- refactor i915/snd-hda interaction to use the component framework (Imre)
- psr cleanups and small fixes (Rodrigo)
- a few perf w/a from Ken Graunke
- switch to atomic plane helpers (Matt Roper)
- wc mmap support (Chris Wilson & Akash Goel)
- smaller things all over
* tag 'drm-intel-next-2015-01-17' of git://anongit.freedesktop.org/drm-intel: (40 commits)
drm/i915: Update DRIVER_DATE to
20150117
i915: reuse %ph to dump small buffers
drm/i915: Ensure the HiZ RAW Stall Optimization is on for Cherryview.
drm/i915: Enable the HiZ RAW Stall Optimization on Broadwell.
drm/i915: PSR link standby at debugfs
drm/i915: group link_standby setup and let this info visible everywhere.
drm/i915: Add missing vbt check.
drm/i915: PSR HSW/BDW: Fix inverted logic at sink main_link_active bit.
drm/i915: PSR VLV/CHV: Remove condition checks that only applies to Haswell.
drm/i915: VLV/CHV PSR needs to exit PSR on every flush.
drm/i915: Fix kerneldoc for i915 atomic plane code
drm/i915: Don't pretend SDVO hotplug works on 915
drm/i915: Don't register HDMI connectors for eDP ports on VLV/CHV
drm/i915: Remove I915_HAS_HOTPLUG() check from i915_hpd_irq_setup()
drm/i915: Make hpd arrays big enough to avoid out of bounds access
Revert "drm/i915/chv: Use timeout mode for RC6 on chv"
drm/i915: Improve HiZ throughput on Cherryview.
drm/i915: Reset CSB read pointer in ring init
drm/i915: Drop unused position fields (v2)
drm/i915: Move to atomic plane helpers (v9)
...
Dave Airlie [Mon, 26 Jan 2015 22:54:11 +0000 (08:54 +1000)]
Merge tag 'topic/core-stuff-2015-01-23' of git://anongit.freedesktop.org/drm-intel into drm-next
Just flushing out my drm-misc branch, nothing major. Well too old patches
I've dug out from years since a patch from Rob look eerily familiar ;-)
* tag 'topic/core-stuff-2015-01-23' of git://anongit.freedesktop.org/drm-intel:
drm/probe-helper: clamp unknown connector status in the poll work
drm/probe-helper: don't lose hotplug event
next: drm/atomic: Use copy_from_user to copy 64 bit data from user space
drm: Make drm_read() more robust against multithreaded races
drm/fb-helper: Propagate errors from initial config failure
drm: Drop superfluous "select VT_HW_CONSOLE_BINDING"
Daniel Vetter [Wed, 21 Jan 2015 07:45:22 +0000 (08:45 +0100)]
drm/probe-helper: clamp unknown connector status in the poll work
On some chipset we try to avoid possibly invasive output detection
methods (like load detect which can cause flickering elsewhere) in the
output poll work. Drivers could hence return unknown when a previous
full ->detect call returned a different state.
This change will generate a hotplug event, forcing userspace to do a
full scan. This in turn updates the connector->status field so that we
will _again_ get a state change when the hotplug work re-runs in 10
seconds.
To avoid this ping-pong loop detect this situation and clamp the
connector state to the old value.
Patch is inspired by a patch from Knut Peterson. Knut's patch
completely ignored connector state changes if either the old or new
status was unknown, which seemed to be a bit too agressive to me.
v2: Rebased onto the drm_probe_helper.c extraction.
References: http://lists.freedesktop.org/archives/dri-devel/2012-August/025975.html
Cc: Knut Petersen <Knut_Petersen@t-online.de>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 21 Jan 2015 07:45:21 +0000 (08:45 +0100)]
drm/probe-helper: don't lose hotplug event
There's a race window (small for hpd, 10s large for polled outputs)
where userspace could sneak in with an unrelated connnector probe
ioctl call and eat the hotplug event (since neither the hpd nor the
poll code see a state change).
To avoid this, check whether the connector state changes in all other
->detect calls (in the current helper code that's only probe_single)
and if that's the case, fire off a hotplug event. Note that we can't
directly call the hotplug event handler, since that expects that no
locks are held (due to reentrancy with the fb code to update the kms
console).
Also, this requires that drivers using the probe_single helper
function set up the poll work. All current drivers do that already,
and with the reworked hpd handling there'll be no downside to
unconditionally setting up the poll work any more.
v2: Review from Rob Clark
- Don't bail out of the output poll work immediately if it's disabled
to make sure we deliver the delayed hoptplug events. Instead just
jump to the tail.
- Don't scheduel the work when it's not set up. Would be a driver bug
since using probe helpers for anything dynamic without them
initialized makes them all noops.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Tested-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Dave Airlie [Thu, 22 Jan 2015 02:35:02 +0000 (12:35 +1000)]
Merge branch 'linux-3.20' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next
There's a huge amount of no-op churn here renaming the majority of the
driver from nouveau_ to nvkm_, in preparation for splitting the module
into two down the track. Also switched to NVIDIA's unit and chipset
names at the same time. Despite the massive amount of code touch, the
commits should be safe as objdump was used to verify nothing got
changed accidentally in the renames.
Aside from that, not much in this first pull request:
- nouveau_platform.ko for GK20A was merged into nouveau.ko
- GK20A dynamic reclocking support
- no more vt-switches across suspend/resume
- changed output scaling policy. if the mode comes from the display's
edid, we program that directly rather than using the gpu to scale to
the panel's native mode. this should address complaints of having to
jump through hoops for 24/120Hz modes etc
- various other minor fixups and cleanups
* 'linux-3.20' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: (86 commits)
drm/nouveau: finalise nvkm namespace switch (no binary change)
drm/nouveau/device: namespace + nvidia gpu names (no binary change)
drm/nouveau/vp: namespace + nvidia gpu names (no binary change)
drm/nouveau/sw: namespace + nvidia gpu names (no binary change)
drm/nouveau/sec: namespace + nvidia gpu names (no binary change)
drm/nouveau/pm: namespace + nvidia gpu names (no binary change)
drm/nouveau/msvld: namespace + nvidia gpu names (no binary change)
drm/nouveau/msppp: namespace + nvidia gpu names (no binary change)
drm/nouveau/mspdec: namespace + nvidia gpu names (no binary change)
drm/nouveau/mpeg: namespace + nvidia gpu names (no binary change)
drm/nouveau/gr: namespace + nvidia gpu names (no binary change)
drm/nouveau/fifo: namespace + nvidia gpu names (no binary change)
drm/nouveau/dmaobj: namespace + nvidia gpu names (no binary change)
drm/nouveau/disp: namespace + nvidia gpu names (no binary change)
drm/nouveau/cipher: namespace + nvidia gpu names (no binary change)
drm/nouveau/ce: namespace + nvidia gpu names (no binary change)
drm/nouveau/bsp: namespace + nvidia gpu names (no binary change)
drm/nouveau/volt: namespace + nvidia gpu names (no binary change)
drm/nouveau/timer: namespace + nvidia gpu names (no binary change)
drm/nouveau/therm: namespace + nvidia gpu names (no binary change)
...
Ben Skeggs [Wed, 14 Jan 2015 05:36:34 +0000 (15:36 +1000)]
drm/nouveau: finalise nvkm namespace switch (no binary change)
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 14 Jan 2015 05:35:00 +0000 (15:35 +1000)]
drm/nouveau/device: namespace + nvidia gpu names (no binary change)
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 14 Jan 2015 05:32:28 +0000 (15:32 +1000)]
drm/nouveau/vp: namespace + nvidia gpu names (no binary change)
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 14 Jan 2015 05:32:15 +0000 (15:32 +1000)]
drm/nouveau/sw: namespace + nvidia gpu names (no binary change)
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 14 Jan 2015 05:31:24 +0000 (15:31 +1000)]
drm/nouveau/sec: namespace + nvidia gpu names (no binary change)
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 14 Jan 2015 05:31:13 +0000 (15:31 +1000)]
drm/nouveau/pm: namespace + nvidia gpu names (no binary change)
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 14 Jan 2015 05:30:40 +0000 (15:30 +1000)]
drm/nouveau/msvld: namespace + nvidia gpu names (no binary change)
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 14 Jan 2015 05:30:22 +0000 (15:30 +1000)]
drm/nouveau/msppp: namespace + nvidia gpu names (no binary change)
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 14 Jan 2015 05:30:09 +0000 (15:30 +1000)]
drm/nouveau/mspdec: namespace + nvidia gpu names (no binary change)
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 14 Jan 2015 05:29:56 +0000 (15:29 +1000)]
drm/nouveau/mpeg: namespace + nvidia gpu names (no binary change)
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 14 Jan 2015 05:29:43 +0000 (15:29 +1000)]
drm/nouveau/gr: namespace + nvidia gpu names (no binary change)
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 14 Jan 2015 05:28:47 +0000 (15:28 +1000)]
drm/nouveau/fifo: namespace + nvidia gpu names (no binary change)
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 14 Jan 2015 05:27:54 +0000 (15:27 +1000)]
drm/nouveau/dmaobj: namespace + nvidia gpu names (no binary change)
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 14 Jan 2015 05:24:57 +0000 (15:24 +1000)]
drm/nouveau/disp: namespace + nvidia gpu names (no binary change)
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 14 Jan 2015 05:22:43 +0000 (15:22 +1000)]
drm/nouveau/cipher: namespace + nvidia gpu names (no binary change)
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 14 Jan 2015 05:22:32 +0000 (15:22 +1000)]
drm/nouveau/ce: namespace + nvidia gpu names (no binary change)
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 14 Jan 2015 05:22:20 +0000 (15:22 +1000)]
drm/nouveau/bsp: namespace + nvidia gpu names (no binary change)
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 14 Jan 2015 05:13:36 +0000 (15:13 +1000)]
drm/nouveau/volt: namespace + nvidia gpu names (no binary change)
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 14 Jan 2015 05:12:11 +0000 (15:12 +1000)]
drm/nouveau/timer: namespace + nvidia gpu names (no binary change)
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 14 Jan 2015 05:11:48 +0000 (15:11 +1000)]
drm/nouveau/therm: namespace + nvidia gpu names (no binary change)
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 14 Jan 2015 05:10:40 +0000 (15:10 +1000)]
drm/nouveau/pmu: namespace + nvidia gpu names (no binary change)
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 14 Jan 2015 05:09:19 +0000 (15:09 +1000)]
drm/nouveau/mmu: namespace + nvidia gpu names (no binary change)
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 14 Jan 2015 05:08:21 +0000 (15:08 +1000)]
drm/nouveau/mc: namespace + nvidia gpu names (no binary change)
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 14 Jan 2015 05:06:26 +0000 (15:06 +1000)]
drm/nouveau/ltc: namespace + nvidia gpu names (no binary change)
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 14 Jan 2015 05:05:26 +0000 (15:05 +1000)]
drm/nouveau/instmem: namespace + nvidia gpu names (no binary change)
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 14 Jan 2015 05:04:31 +0000 (15:04 +1000)]
drm/nouveau/ibus: namespace + nvidia gpu names (no binary change)
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 14 Jan 2015 05:04:16 +0000 (15:04 +1000)]
drm/nouveau/i2c: namespace + nvidia gpu names (no binary change)
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 14 Jan 2015 05:02:59 +0000 (15:02 +1000)]
drm/nouveau/gpio: namespace + nvidia gpu names (no binary change)
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 14 Jan 2015 04:53:51 +0000 (14:53 +1000)]
drm/nouveau/fuse: namespace + nvidia gpu names (no binary change)
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 14 Jan 2015 04:52:58 +0000 (14:52 +1000)]
drm/nouveau/fb: namespace + nvidia gpu names (no binary change)
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 14 Jan 2015 04:48:16 +0000 (14:48 +1000)]
drm/nouveau/devinit: namespace + nvidia gpu names (no binary change)
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 14 Jan 2015 04:47:24 +0000 (14:47 +1000)]
drm/nouveau/clk: namespace + nvidia gpu names (no binary change)
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 14 Jan 2015 04:40:22 +0000 (14:40 +1000)]
drm/nouveau/bus: namespace + nvidia gpu names (no binary change)
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 14 Jan 2015 04:40:03 +0000 (14:40 +1000)]
drm/nouveau/bios: namespace + nvidia gpu names (no binary change)
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 14 Jan 2015 04:35:35 +0000 (14:35 +1000)]
drm/nouveau/bar: namespace + nvidia gpu names (no binary change)
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 14 Jan 2015 04:11:21 +0000 (14:11 +1000)]
drm/nouveau/core: namespace + nvidia gpu names (no binary change)
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 12 Jan 2015 02:33:37 +0000 (12:33 +1000)]
drm/nouveau/nvif: namespace of nvkm accessors (no binary change)
NVKM is having it's namespace switched to nvkm_, which will conflict
with these functions (which are workarounds for the fact that as of
yet, we still aren't able to split DRM and NVKM completely).
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 14 Jan 2015 06:58:51 +0000 (16:58 +1000)]
drm/nouveau/core: split device index enum out on its own
To avoid having to include core/device.h where it's not otherwise
required.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 14 Jan 2015 02:50:04 +0000 (12:50 +1000)]
drm/nouveau/mspdec: separate from vp
Switch to NVIDIA's name for the device.
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 14 Jan 2015 02:37:00 +0000 (12:37 +1000)]
drm/nouveau/msenc: rename from venc (no binary change)
Switch to NVIDIA's name for the device.
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 14 Jan 2015 02:34:00 +0000 (12:34 +1000)]
drm/nouveau/sw: rename from software (no binary change)
Shorter device name, make consistent with our engine enums.
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 14 Jan 2015 02:26:28 +0000 (12:26 +1000)]
drm/nouveau/msppp: rename from ppp (no binary change)
Switch to NVIDIA's name for the device.
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 14 Jan 2015 02:11:28 +0000 (12:11 +1000)]
drm/nouveau/pm: rename from perfmon (no binary change)
Switch to NVIDIA's name for the device.
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 14 Jan 2015 02:02:28 +0000 (12:02 +1000)]
drm/nouveau/gr: rename from graph (no binary change)
Shorter device name, match Tegra and our existing enums.
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 14 Jan 2015 01:50:20 +0000 (11:50 +1000)]
drm/nouveau/ce: rename from copy (no binary change)
Switch to NVIDIA's name for the device.
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 14 Jan 2015 00:46:55 +0000 (10:46 +1000)]
drm/nouveau/sec: separate from cipher (formerly crypt)
Switch to NVIDIA's name for the device.
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 14 Jan 2015 00:09:24 +0000 (10:09 +1000)]
drm/nouveau/msvld: separate from bsp
Switch to NVIDIA's name for the device.
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 13 Jan 2015 23:57:36 +0000 (09:57 +1000)]
drm/nouveau/mmu: rename from vmmgr (no binary change)
Switch to NVIDIA's name for the device.
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 13 Jan 2015 14:04:21 +0000 (00:04 +1000)]
drm/nouveau/pmu: rename from pwr (no binary change)
Switch to NVIDIA's name for the device.
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 13 Jan 2015 13:37:38 +0000 (23:37 +1000)]
drm/nouveau/clk: rename from clock (no binary change)
Rename to match the Linux subsystem responsible for the same kind of
things. Will be investigating how feasible it will be to expose the
GPU clock trees with it at some point.
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 13 Jan 2015 12:13:14 +0000 (22:13 +1000)]
drm/nouveau: remove symlinks, move core/ to nvkm/ (no code changes)
The symlinks were annoying some people, and they're not used anywhere
else in the kernel tree. The include directory structure has been
changed so that symlinks aren't needed anymore.
NVKM has been moved from core/ to nvkm/ to make it more obvious as to
what the directory is for, and as some minor prep for when NVKM gets
split out into its own module (virt) at a later date.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Thu, 15 Jan 2015 06:29:56 +0000 (15:29 +0900)]
drm/nouveau: merge nouveau_platform.ko into nouveau.ko
Having the two modules separated causes various unneeded complications,
including having to export symbols accessed between the modules. Make
things simpler by compiling platform device support into nouveau.ko.
Platform device support remains optional and is only compiled on Tegra.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Vince Hsu <vinceh@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Maarten Lankhorst [Tue, 13 Jan 2015 08:18:49 +0000 (09:18 +0100)]
drm/nouveau: dont switch vt on suspend
Restore the nv50 cursor bo on resume, and load the lut in
nv50_display_display_init so it gets set on resume too.
Tested on a fermi and a curie.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@ubuntu.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Rickard Strandqvist [Sun, 11 Jan 2015 22:36:47 +0000 (23:36 +0100)]
drm/nouveau/dispnv04: Remove some unused functions
Removes some functions that are not used anywhere:
nv04_display_late_takedown() nv04_display_early_init()
This was partially found by using a static code analysis program
called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Rickard Strandqvist [Sun, 11 Jan 2015 13:58:05 +0000 (14:58 +0100)]
drm/nouveau/gem: Remove unused function
Remove the function domain_to_ttm() that is not used anywhere.
This was partially found by using a static code analysis program
called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Rickard Strandqvist [Sun, 11 Jan 2015 22:31:35 +0000 (23:31 +0100)]
drm/nouveau/bo: Remove unused function
Remove the function nouveau_bo_rd16() that is not used anywhere.
This was partially found by using a static code analysis program
called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Vince Hsu [Mon, 22 Dec 2014 09:11:40 +0000 (17:11 +0800)]
drm/nouveau/clk: allow users to enable auto mode when loading driver
This patch adds one option for the boot config strings "NvClkMode*", so
that we can enable the "auto" mode when loading module.
Signed-off-by: Vince Hsu <vinceh@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Vince Hsu [Mon, 22 Dec 2014 09:11:39 +0000 (17:11 +0800)]
drm/nouveau/pwr: add support for GK20A
This patch adds PWR support for GK20A. But instead of adding the PWR
features like firmware loading and communication with PMU firmware, we
add the DVFS (Dynamic Voltage and Frequency Scaling), which is one of
the PMU firmware's jobs on dGPUs, in this patch. This refers to the
idle signals provided by the NVIDIA hardware and tries to adjust the
performance level based on the calculated target. The reclocking policy
can be fine-tuned later when we have more real use cases.
Signed-off-by: Vince Hsu <vinceh@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Vince Hsu [Mon, 22 Dec 2014 09:11:38 +0000 (17:11 +0800)]
drm/nouveau/pwr: make nouveau_pwr_pgob() non-static
The platform device does not use the common nouveau_pwr_init() to initialize
the PWR, but it does need the .pgob() be assigned to avoid NULL pointer
dereference in graph/nve4.c.
Signed-off-by: Vince Hsu <vinceh@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Vince Hsu [Mon, 22 Dec 2014 09:11:37 +0000 (17:11 +0800)]
drm/nouveau/clk: allow non-blocking for nouveau_clock_astate()
There might be some callers of nouveau_clock_astate(), and they are from
inetrrupt context. So we must ensure that this function can be atomic in
that condition. This patch adds one parameter which is subsequently passed
to nouveau_pstate_calc(). Therefore we can choose whether we want to wait
for the pstate work's completion or not.
Signed-off-by: Vince Hsu <vinceh@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Vince Hsu [Tue, 30 Dec 2014 06:59:42 +0000 (14:59 +0800)]
drm/nouveau/mc: add missing braces
Several braces were misplaced unintentionally. That caused the msi handling
became part of the default case of the first switch statement. So add the
missing ones.
Signed-off-by: Vince Hsu <vinceh@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 22 Dec 2014 09:50:23 +0000 (19:50 +1000)]
drm/nv50-/kms: reject attempts at flipping to incompatible framebuffer
Looks like a userspace bug can trigger this somehow during a mode
switch, causing: EVO complaint -> semaphores get out of sync ->
entire display stalled.
We likely want to be even stricter than this (or at least deal
better if EVO rejects our request), but I'll save that for the
drm_plane/atomic conversion and just fix the bug that I already
know can be triggered.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 22 Dec 2014 08:19:45 +0000 (18:19 +1000)]
drm/nouveau/kms: default to panel scaling, except for fixed panels prior to nv50
On NV50 and up, we'll allow fixed panels to use EDID-provided modes
without the GPU scaler, and force scaling (even for NONE) otherwise.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 22 Dec 2014 08:15:55 +0000 (18:15 +1000)]
drm/nouveau/kms: untangle connector property logic a little
Should be the same defaults as before, just easier to follow.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 22 Dec 2014 07:28:35 +0000 (17:28 +1000)]
drm/nouveau/kms: avoid adding scaler-only modes the same as the panel's native mode
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 22 Dec 2014 07:19:26 +0000 (17:19 +1000)]
drm/nv50-/kms: allow disabling of gpu scaling on fixed panels
The hilarious part is that, under X, this won't work anyway because the
server decides to construct its own modes for some reason.
Tested with modetest, which isn't quite as insane. I'd hope that
wayland is more sensible.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 22 Dec 2014 06:30:13 +0000 (16:30 +1000)]
drm/nv50-/kms: move identical scaler mode fixup code into a function
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Wed, 10 Dec 2014 19:07:20 +0000 (04:07 +0900)]
drm/nouveau: sgdma: add comment around suspiscious error handler
Common programming sense dictates that resources allocated by a function
are freed by this function should it fails, but this is not the case for
the allocated structure of nouveau_sgdma_create_ttm(). It seems that
n00b contributors attempt to fix this one like bugs flying towards a bug
zapper, so add a comment to hopefully prevent this from happening
anymore.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Wed, 10 Dec 2014 18:43:05 +0000 (03:43 +0900)]
drm/nouveau: sgdma: remove unused nouveau_sgdma_be::dev
nouveau_sgdma_be::dev is only set once during init and never used
anywhere, so remove it.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 5 Dec 2014 02:37:19 +0000 (12:37 +1000)]
drm/nouveau/core: object.engine is always a nouveau_engine now
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 5 Dec 2014 02:21:34 +0000 (12:21 +1000)]
drm/nouveau/core: can now assume client/device object tree based on object.engine
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 5 Dec 2014 02:12:23 +0000 (12:12 +1000)]
drm/nouveau/disp: outp/conns do not have an engine
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 5 Dec 2014 02:08:20 +0000 (12:08 +1000)]
drm/nouveau/bar: barobjs may not have an engine
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 5 Dec 2014 02:04:56 +0000 (12:04 +1000)]
drm/nouveau/fb: ram impl does not have an engine
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 5 Dec 2014 02:03:55 +0000 (12:03 +1000)]
drm/nouveau/i2c: pad/ports do not have an engine
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 5 Dec 2014 01:54:50 +0000 (11:54 +1000)]
drm/nouveau/instmem: instobjs may not have an engine
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 5 Dec 2014 01:26:23 +0000 (11:26 +1000)]
drm/nouveau/core: fix subdev/engine/device lookup to not require engine pointer
It's about to not be valid for objects that aren't in the client
object tree.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 5 Dec 2014 01:20:19 +0000 (11:20 +1000)]
drm/nouveau/core: uninline subdev/engine/device lookup functions
These are a tad more complex than a direct cast with paranoia safeties.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 5 Dec 2014 01:03:18 +0000 (11:03 +1000)]
drm/nouveau/core: prepare printk for NULL engine pointer on device object tree
The [ SUBDEV] specified in log output will be a bit different for
children of a subdev now. Previously this reports whatever subdev
is specified by object.engine, now it reports the subdev that owns
the object (so, up object.parent somewhere).
Later patches will append object and class identifiers to messages,
which will help clarify where it's coming from.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 5 Dec 2014 00:55:50 +0000 (10:55 +1000)]
drm/nouveau/core: drop the pointer value in debug printk output
Makes the output slightly less useful, in that objects with the same
class handle can't be distinguished from each other now.
Upcoming commits will name objects with user-readable strings to fix
this problem.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 3 Dec 2014 08:47:09 +0000 (18:47 +1000)]
drm/nouveau/i2c: fix some blatant abuse
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 3 Dec 2014 08:19:58 +0000 (18:19 +1000)]
drm/gf100-/bar: don't fill in bar->alloc until after all vm setup done
gpuobj has a condition of (bar && bar->alloc) around usage to avoid
some nasty ordering issues (which, i've now been reminded to add a
todo about fixing...) between bar and vm.
The bar->alloc part of the condition isn't currently necessary (it
used to be, another change made bar always NULL where it matters),
so we got lucky. That won't be the case for much longer.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 3 Dec 2014 03:00:30 +0000 (13:00 +1000)]
drm/nouveau/core: rename parent to handle, use parent for nouveau_parent
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 3 Dec 2014 02:56:41 +0000 (12:56 +1000)]
drm/nouveau/core: rename subclass.base to subclass.superclass
Makes things a bit more readable. This is specially important now as
upcoming commits are going to be gradually removing the use of macros
for down-casts, in favour of compile-time checking.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 3 Dec 2014 07:07:22 +0000 (17:07 +1000)]
drm/nouveau/subdev: always upcast through nouveau_subdev()/nouveau_engine()
Has additional safeties for one. For two, needed for an upcoming
commit that removes abuse of nouveau_object.engine.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 3 Dec 2014 06:43:16 +0000 (16:43 +1000)]
drm/nouveau/fb: remove some (now) unnecessary hacks
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Dave Airlie [Thu, 22 Jan 2015 00:44:41 +0000 (10:44 +1000)]
Merge remote-tracking branch 'origin/master' into drm-next
Backmerge Linus tree after rc5 + drm-fixes went in.
There were a few amdkfd conflicts I wanted to avoid,
and Ben requested this for nouveau also.
Conflicts:
drivers/gpu/drm/amd/amdkfd/Makefile
drivers/gpu/drm/amd/amdkfd/kfd_chardev.c
drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager.c
drivers/gpu/drm/amd/amdkfd/kfd_priv.h
drivers/gpu/drm/amd/include/kgd_kfd_interface.h
drivers/gpu/drm/i915/intel_runtime_pm.c
drivers/gpu/drm/radeon/radeon_kfd.c
Dave Airlie [Wed, 21 Jan 2015 23:59:25 +0000 (09:59 +1000)]
Merge branch 'drm-sti-next-add-dvo' of git://git.linaro.org/people/benjamin.gaignard/kernel into drm-next
This patch enable the last big hardware feature of my driver: the
connector for panel.
Like for HMDI and HDA, Digital Video Out (DVO) create brige, encoder
and connector
drm objects.
* 'drm-sti-next-add-dvo' of git://git.linaro.org/people/benjamin.gaignard/kernel:
drm: sti: add DVO output connector
Dave Airlie [Wed, 21 Jan 2015 23:48:02 +0000 (09:48 +1000)]
Merge tag 'atmel-hlcdc-drm-3.20' of https://github.com/bbrezillon/linux-at91 into drm-next
Add atmel HLCDC driver.
* tag 'atmel-hlcdc-drm-3.20' of https://github.com/bbrezillon/linux-at91:
drm: add DT bindings documentation for atmel-hlcdc-dc driver
drm: add Atmel HLCDC Display Controller support
drm: panel: simple-panel: add bus format information for foxlink panel
drm: panel: simple-panel: add support for bus_format retrieval
drm: add bus_formats and num_bus_formats fields to drm_display_info
Dave Airlie [Wed, 21 Jan 2015 23:44:46 +0000 (09:44 +1000)]
Merge tag 'drm-amdkfd-next-2015-01-21' of git://people.freedesktop.org/~gabbayo/linux into drm-next
- Infrastructure work in amdkfd to prepare for VI support. This work mainly
includes separating modules into ASIC-specific functionality, adding
new properties that are relevant for VI, making sure that shared code is
reused, etc.
- Improve mechanism of submitting packets to HIQ (the kernel queue that amdkfd
uses to issue commands to the GPU). The driver used to verify that each CS
was read by the GPU. However, this proved to be both unnecessary and erroneous.
Therefore, we cancelled this verification.
- Moved initialization of compute VMIDs into radeon driver
- Various minor fixes
* tag 'drm-amdkfd-next-2015-01-21' of git://people.freedesktop.org/~gabbayo/linux: (22 commits)
drm/amdkfd: Fix description of sched_policy module parameter
drm/amdkfd: Remove sync_with_hw() from amdkfd
drm/amdkfd: Remove unused function busy_wait()
drm/amdkfd: Replace cpu_relax() with schedule() in DQM
drm/amdkfd: Fix for-loop when allocating HQD (non-HWS)
drm/amdkfd: Add initial VI support for KQ
drm/amdkfd: Encapsulate KQ functions in ops structure
drm/amdkfd: Add initial VI support for DQM
drm/amdkfd: Encapsulate DQM functions in ops structure
drm/amdkfd: Don't BUG on freeing GART sub-allocation
drm/amdkfd: Fix logic of destroy_queue_nocpsch()
MAINTAINERS: Update amdkfd files
drm/amdkfd: Change MQD manager to be H/W specific
drm/amdkfd: Add asic property to kfd_device_info
drm/amdkfd: Make KFD_MQD_TYPE enum types H/W agnostic
drm/amdkfd: Add new VI-specific queue properties
drm/radeon: Use new cik_structs.h file
drm/amdkfd: Don't include header files from radeon
drm/amd: Put cik structures in a common place
drm/radeon: Don't use relative paths in #include
...
Linus Torvalds [Wed, 21 Jan 2015 18:26:07 +0000 (06:26 +1200)]
Merge tag 'trace-sh-3.19' of git://git./linux/kernel/git/rostedt/linux-trace
Pull superh tracing fix from Steven Rostedt:
"It's been reported that function tracing does not work on the sh
architecture because gcc 4.8 for superH does not support -m32, and the
recordmcount.pl script adds "-m32" when re-compiling the object files
with the mcount locations.
I was not able to reproduce this problem, as it seems that -m32 works
fine for my cross compiler gcc 4.6.3, but I have to assume that -m32
was deprecated somewhere between 4.6 and 4.8. As it still seems to
compile fine without -m32, I have no reason not to add this patch, as
having -m32 seems to cause trouble for others"
* tag 'trace-sh-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
scripts/recordmcount.pl: There is no -m32 gcc option on Super-H anymore
Guenter Roeck [Tue, 13 Jan 2015 05:12:17 +0000 (21:12 -0800)]
next: drm/atomic: Use copy_from_user to copy 64 bit data from user space
Copying 64 bit data from user space using get_user is not supported
on all architectures, and may result in the following build error.
ERROR: "__get_user_bad" [drivers/gpu/drm/drm.ko] undefined!
Avoid the problem by using copy_from_user.
Fixes: d34f20d6e2f2 ("drm: Atomic modeset ioctl")
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Thu, 4 Dec 2014 21:03:25 +0000 (21:03 +0000)]
drm: Make drm_read() more robust against multithreaded races
The current implementation of drm_read() faces a number of issues:
1. Upon an error, it consumes the event which may lead to the client
blocking.
2. Upon an error, it forgets about events already copied
3. If it fails to copy a single event with O_NONBLOCK it falls into a
infinite loop of reporting EAGAIN.
3. There is a race between multiple waiters and blocking reads of the
events list.
Here, we inline drm_dequeue_event() into drm_read() so that we can take
the spinlock around the list walking and event copying, and importantly
reorder the error handling to avoid the issues above.
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Testcase: igt/drm_read
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Thierry Reding [Fri, 19 Dec 2014 10:21:32 +0000 (11:21 +0100)]
drm/fb-helper: Propagate errors from initial config failure
Make drm_fb_helper_initial_config() return an int rather than a bool so
that the error can be properly propagated. While at it, update drivers
to propagate errors further rather than just ignore them.
v2:
- cirrus: No cleanup is required, the top-level cirrus_driver_load()
will do it as part of cirrus_driver_unload() in its cleanup path.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
[danvet: Squash in simplification patch from kbuild.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Geert Uytterhoeven [Mon, 12 Jan 2015 20:10:12 +0000 (21:10 +0100)]
drm: Drop superfluous "select VT_HW_CONSOLE_BINDING"
commit
765d5b9c2b72f5b9 ("fbdev: fbcon: select VT_HW_CONSOLE_BINDING")
made FRAMEBUFFER_CONSOLE always select VT_HW_CONSOLE_BINDING, but forgot
to remove
select VT_HW_CONSOLE_BINDING if FRAMEBUFFER_CONSOLE
from the individual drivers' sections that already did this before.
Remove it, also from new drivers.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This page took 0.06518 seconds and 5 git commands to generate.