Takashi Iwai [Fri, 28 Feb 2014 12:42:09 +0000 (13:42 +0100)]
ALSA: hda - Fix registration of beep input device
The beep input device is registered via input_register_device(), but
this is called in snd_hda_attach_beep_device() where the sound devices
aren't registered yet. This leads to the binding to non-existing
object, thus results in failure. And, even if the binding worked
(against the PCI object), it's still racy; the input device appears
before the sound objects.
For fixing this, register the input device properly at dev_register
ops of the codec object it's bound with. Also, call
snd_hda_detach_beep_device() at dev_disconnection so that it's
detached at the right timing. As a bonus, since it's called in the
codec's ops, we can get rid of the further call from the other codec
drivers.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 28 Feb 2014 10:54:43 +0000 (11:54 +0100)]
Merge branch 'topic/cvt-dev-prints' into for-next
This merges the bunch of changes over pci and usb sound drivers to
convert to dev_err() and co.
Takashi Iwai [Thu, 27 Feb 2014 15:24:53 +0000 (16:24 +0100)]
ALSA: hda/sigmatel - Allow auto-switching for dock line-in of HP laptops
Many HP laptops with STAC codecs have a docking station port and BIOS
sets the pins for the input on the dock as a line in. Because the
generic parser doesn't handle a line in pin as auto-switchable, this
resulted in the manual capture source selection on these laptops.
However, from the usability POV, the automatic switching is easier.
This patch adds the line_in_auto_switch hint in the fixup function for
these laptops. Even if no dock port is present, this should be
harmless as the generic parser allows the auto-switching only in a
limited situation (all three pins are located in different
positions).
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 27 Feb 2014 15:00:17 +0000 (16:00 +0100)]
ALSA: Move EXPORT_SYMBOL() in appropriate places
Just a cleanup to follow the standard coding style.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 27 Feb 2014 08:33:00 +0000 (09:33 +0100)]
ALSA: hda - Make codec object as a parent for input beep devices
Instead of the controller, the new codec object is assigned as a
parent for the hd-audio beep input devices, just like already done for
PCM and hwdep.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 26 Feb 2014 14:51:04 +0000 (15:51 +0100)]
ALSA: 6fire: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 26 Feb 2014 12:02:17 +0000 (13:02 +0100)]
ALSA: usb-audio: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
As there are too deep indirections (e.g. ep->chip->dev->dev),
a few new local macros, usb_audio_err() & co, are introduced.
Also, the device numbers in some messages are dropped, as they are
shown in the prefix automatically.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 26 Feb 2014 11:18:27 +0000 (12:18 +0100)]
ALSA: ymfpci: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 26 Feb 2014 11:13:57 +0000 (12:13 +0100)]
ALSA: vx222: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 26 Feb 2014 11:11:29 +0000 (12:11 +0100)]
ALSA: trident: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 26 Feb 2014 11:06:24 +0000 (12:06 +0100)]
ALSA: rme9652: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 26 Feb 2014 11:05:40 +0000 (12:05 +0100)]
ALSA: hdspm: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 26 Feb 2014 11:05:11 +0000 (12:05 +0100)]
ALSA: hdsp: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 26 Feb 2014 10:47:55 +0000 (11:47 +0100)]
ALSA: pcxhr: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 25 Feb 2014 17:00:26 +0000 (18:00 +0100)]
ALSA: oxygen: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 25 Feb 2014 16:57:42 +0000 (17:57 +0100)]
ALSA: nm256: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 25 Feb 2014 16:51:46 +0000 (17:51 +0100)]
ALSA: mixart: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 25 Feb 2014 16:32:49 +0000 (17:32 +0100)]
ALSA: lx6464es: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 25 Feb 2014 16:23:57 +0000 (17:23 +0100)]
ALSA: lola: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 25 Feb 2014 16:16:16 +0000 (17:16 +0100)]
ALSA: ice17xx: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 25 Feb 2014 16:02:09 +0000 (17:02 +0100)]
ALSA: emu10k1: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 25 Feb 2014 16:01:34 +0000 (17:01 +0100)]
ALSA: emu10k1x: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 25 Feb 2014 15:43:02 +0000 (16:43 +0100)]
ALSA: echoaudio: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 25 Feb 2014 15:36:51 +0000 (16:36 +0100)]
ALSA: cs46xx: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 25 Feb 2014 15:10:25 +0000 (16:10 +0100)]
ALSA: cs5535audio: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 25 Feb 2014 15:04:05 +0000 (16:04 +0100)]
ALSA: ca0106: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
A couple of prints are difficult to convert with dev_err() so they are
converted to pr_err() at least.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 25 Feb 2014 14:54:30 +0000 (15:54 +0100)]
ALSA: aw2: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
A couple of prints are difficult to convert with dev_err() so they are
converted to pr_err() at least.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 25 Feb 2014 14:48:50 +0000 (15:48 +0100)]
ALSA: ali5451: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
Some debug prints are replaced with dev_dbg(), too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 25 Feb 2014 14:37:50 +0000 (15:37 +0100)]
ALSA: ac97: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 25 Feb 2014 14:25:50 +0000 (15:25 +0100)]
ALSA: via82xx_modem: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 25 Feb 2014 14:21:56 +0000 (15:21 +0100)]
ALSA: via82xx: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 25 Feb 2014 14:16:04 +0000 (15:16 +0100)]
ALSA: sonicvibes: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
The debug prints are also reformatted to suit with dev_dbg().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 25 Feb 2014 14:03:18 +0000 (15:03 +0100)]
ALSA: rme96: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 25 Feb 2014 13:57:03 +0000 (14:57 +0100)]
ALSA: rme32: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 25 Feb 2014 13:43:41 +0000 (14:43 +0100)]
ALSA: maestro3: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 25 Feb 2014 13:40:45 +0000 (14:40 +0100)]
ALSA: intel8x0m: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 25 Feb 2014 13:37:14 +0000 (14:37 +0100)]
ALSA: intel8x0: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 25 Feb 2014 13:31:35 +0000 (14:31 +0100)]
ALSA: fm801: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 25 Feb 2014 13:29:55 +0000 (14:29 +0100)]
ALSA: es1968: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 25 Feb 2014 13:21:18 +0000 (14:21 +0100)]
ALSA: es1938: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
Some debug prints are replaced with dev_dbg(), too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 25 Feb 2014 13:16:53 +0000 (14:16 +0100)]
ALSA: ens137x: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 25 Feb 2014 13:13:16 +0000 (14:13 +0100)]
ALSA: cs5530: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 25 Feb 2014 13:11:14 +0000 (14:11 +0100)]
ALSA: cs4281: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 25 Feb 2014 11:39:30 +0000 (12:39 +0100)]
ALSA: cmipci: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
Some commented debug prints are also enabled as dev_dbg().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 25 Feb 2014 13:08:22 +0000 (14:08 +0100)]
ALSA: bt87x: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 25 Feb 2014 13:04:46 +0000 (14:04 +0100)]
ALSA: azt3328: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
All debug print macros have been replaced with dev_dbg(), too.
Also, added the missing definition of snd_azf3328_ctrl_inw().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 25 Feb 2014 11:59:05 +0000 (12:59 +0100)]
ALSA: azt3328: Remove function debug prints
We have a better infrastructure in general, so let's reduce the
home-baked debug macros.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 25 Feb 2014 11:56:40 +0000 (12:56 +0100)]
ALSA: atiixp-modem: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 25 Feb 2014 11:54:24 +0000 (12:54 +0100)]
ALSA: atiixp: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 25 Feb 2014 11:51:05 +0000 (12:51 +0100)]
ALSA: als4000: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 25 Feb 2014 11:48:27 +0000 (12:48 +0100)]
ALSA: als300: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
Also, correct the printk level appropriately.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 25 Feb 2014 11:46:10 +0000 (12:46 +0100)]
ALSA: als300: Remove function debug prints
We have a better infrastructure in general, so let's reduce the
home-baked debug macros.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 25 Feb 2014 11:43:13 +0000 (12:43 +0100)]
ALSA: ad1889: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 25 Feb 2014 14:01:15 +0000 (15:01 +0100)]
ALSA: rme96: Convert to the new pm_ops
This driver slipped from the last rewrite. Just convert to the new
standard pm ops.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 25 Feb 2014 11:21:03 +0000 (12:21 +0100)]
ALSA: hda - Replace with standard printk
Use dev_err() and co for messages from HD-audio controller and codec
drivers. The codec drivers are mostly bound with codec objects, so
some helper macros, codec_err(), codec_info(), etc, are provided.
They merely wrap the corresponding dev_xxx().
There are a few places still calling snd_printk() and its variants
as they are called without the codec or device context.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 25 Feb 2014 10:54:06 +0000 (11:54 +0100)]
ALSA: hda - Enable sysfs attributes without CONFIG_SND_HDA_RECONFIG
Some sysfs attributes like init_pin_configs or vendor_name are really
basic and should be available no matter whether the codec driver is
re-configurable or not. Put them out of #ifdef
CONFIG_SND_HDA_RECONFIG and allow the read-only accesses.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 25 Feb 2014 09:38:13 +0000 (10:38 +0100)]
ALSA: hda - Add sysfs to codec object, too
We have currently sysfs attributes for each hwdep, but basically these
should belong to the codec itself, per se. Let's add them to the
codec object while keeping them for hwdep as is for compatibility.
While we are at it, split the sysfs-related stuff into a separate
source file, hda_sysfs.c, and keep only the stuff necessary for hwdep
in hda_hwdep.c.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 25 Feb 2014 06:53:47 +0000 (07:53 +0100)]
ALSA: hda - Create own device struct for each codec
As the HD-audio is treated individually in each codec driver, it's
more convenient to assign an own struct device to each codec object.
Then we'll be able to use dev_err() more easily for each codec, for
example.
For achieving it, this patch just creates an object "hdaudioCxDy".
It belongs to sound class instead of creating a new bus, just for
simplicity, at this stage. No pm ops is implemented in the device
struct level but currently it's merely a container. The PCM and hwdep
devices are now children of this codec device.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 19 Feb 2014 10:41:09 +0000 (11:41 +0100)]
ALSA: hda - Manage each codec instance individually
Now each snd_hda_codec instance is managed via the device chain, the
registration and release are done by its callback instead of calling
from bus.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 4 Feb 2014 10:36:11 +0000 (11:36 +0100)]
ALSA: Clean up snd_device_*() codes
A few code cleanups and optimizations. In addition, drop
snd_device_disconnect() that isn't used at all, and drop the return
values from snd_device_free*().
Another slight difference by this change is that now the device state
will become always SNDRV_DEV_REGISTERED no matter whether dev_register
ops is present or not. It's for better consistency. There should be
no impact for the current tree, as the state isn't checked.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 29 Jan 2014 14:53:35 +0000 (15:53 +0100)]
ALSA: Use priority list for managing device list
Basically, the device type specifies the priority of the device to be
registered / freed, too. However, the priority value isn't well
utilized but only it's checked as a group. This results in
inconsistent register and free order (where each of them should be in
reversed direction).
This patch simplifies the device list management code by simply
inserting a list entry at creation time in an incremental order for
the priority value. Since we can just follow the link for register,
disconnect and free calls, we don't have to specify the group; so the
whole enum definitions are also simplified as well.
The visible change to outside is that the priorities of some object
types are revisited. For example, now the SNDRV_DEV_LOWLEVEL object
is registered before others (control, PCM, etc) and, in return,
released after others. Similarly, SNDRV_DEV_CODEC is in a lower
priority than SNDRV_DEV_BUS for ensuring the dependency.
Also, the unused SNDRV_DEV_TOPLEVEL, SNDRV_DEV_LOWLEVEL_PRE and
SNDRV_DEV_LOWLEVEL_NORMAL are removed as a cleanup.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 25 Feb 2014 07:05:21 +0000 (08:05 +0100)]
ALSA: hwdep: Allow to assign the given parent
Just like PCM, allow hwdep to be assigned to a different parent device
than the card. It'll be used for the HD-audio codec device in the
later patches.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 25 Feb 2014 09:00:58 +0000 (10:00 +0100)]
ALSA: hwdep: Take private_data as drvdata for sysfs
For referring to a different object from sysfs ops, take hwdep
private_data as stored via dev_set_drvdata() at creating the device
object. In that way, the same sysfs ops can be used by different
device types.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 25 Feb 2014 07:30:50 +0000 (08:30 +0100)]
ALSA: Create sysfs attribute files via groups
Instead of calling each time device_create_file(), create the groups
of sysfs attribute files at once in a normal way. Add a new helper
function, snd_get_device(), to return the associated device object,
so that we can handle the sysfs addition locally.
Since the sysfs file addition is done differently now,
snd_add_device_sysfs_file() helper function is removed.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 25 Feb 2014 11:12:17 +0000 (12:12 +0100)]
Merge branch 'for-linus' into HEAD
Takashi Iwai [Mon, 13 Jan 2014 15:18:25 +0000 (16:18 +0100)]
ALSA: hda - Avoid codec D3 for keeping mute LED up on Lenovo Yxx0
The GPIO line used for the mute LED control on Lenovo Yxx0 laptops is
cleared unexpectedly when the codec goes to D3, typically by
power-saving. For avoiding it, add a power filter in the fixup.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=16373
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 24 Feb 2014 14:23:10 +0000 (15:23 +0100)]
ALSA: hda - Add a fixup for HP Folio 13 mute LED
HP Folio 13 may have a broken BIOS that doesn't set up the mute LED
GPIO properly, and the driver guesses it wrongly, too. Add a new
fixup entry for setting the GPIO pin statically for this laptop.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=70991
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Sakamoto [Fri, 21 Feb 2014 02:18:57 +0000 (11:18 +0900)]
ALSA: rawmidi: remove undefined functions.
'snd_rawmidi_transmit_reset()' and 'snd_rawmidi_receive_reset()' are declared
but not defined.
This state has been continue over 10 years. So let us remove them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Kailang Yang [Fri, 21 Feb 2014 08:23:35 +0000 (16:23 +0800)]
ALSA: hda/realtek - Add more entry for enable HP mute led
More HP machine need mute led support.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Hui Wang [Thu, 20 Feb 2014 03:47:21 +0000 (11:47 +0800)]
ALSA: hda - Enable front audio jacks on one HP desktop model
The front headphone and mic jackes on a HP desktop model (Vendor Id:
0x111d76c7 Subsystem Id: 0x103c2b17) can not work, the codec on this
machine has 8 physical ports, 6 of them are routed to rear jackes
and all of them work very well, while the remaining 2 ports are
routed to front headphone and mic jackes, but the corresponding
pin complex node are not defined correctly.
After apply this fix, the front audio jackes can work very well.
[trivial fix of enum definition by tiwai]
BugLink: https://bugs.launchpad.net/bugs/1282369
Cc: David Henningsson <david.henningsson@canonical.com>
Tested-by: Gerald Yang <gerald.yang@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 20 Feb 2014 06:50:32 +0000 (07:50 +0100)]
Merge tag 'asoc-v3.14-rc3' of git://git./linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v3.14
A few fixes, all driver speccific ones. The DaVinci ones aren't as
clear as they should be from the subject lines on the commits but they
fix issues which will prevent correct operation in some use cases and
only affect that particular driver so are reasonably safe.
Takashi Iwai [Wed, 19 Feb 2014 10:18:10 +0000 (11:18 +0100)]
ALSA: core: Fix missing card sysfs contents
While moving the card device into struct snd_card, the reference to
the assigned card in sysfs show/store callbacks were forgotten to be
refreshed, still accessing to the no longer used drvdata. Fix these
places to refer correctly via container_of().
Also, remove the superfluous NULL checks since it's guaranteed to be
non-NULL now.
Fixes: 8bfb181c17d2 ('ALSA: Embed card device into struct snd_card')
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 19 Feb 2014 10:11:20 +0000 (11:11 +0100)]
ALSA: hda - Add QEMU codec vendor ID
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Hsin-Yu Chao [Wed, 19 Feb 2014 06:30:35 +0000 (14:30 +0800)]
ALSA: hda/ca0132 - Fix recording from mode id 0x8
Incorrect ADC is picked in ca0132_capture_pcm_prepare(),
where it assumes multiple streams while there is one stream
per ADC. Note that ca0132_capture_pcm_cleanup() already does
the right thing.
The Chromebook Pixel has a microphone under the keyboard that
is attached to node id 0x8. Before this fix, recording would
always go to the main internal mic (node id 0x7).
Signed-off-by: Hsin-Yu Chao <hychao@chromium.org>
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Hsin-Yu Chao [Wed, 19 Feb 2014 06:27:07 +0000 (14:27 +0800)]
ALSA: hda/ca0132 - setup/cleanup streams
When a HDMI stream is opened with the same stream tag
as a following opened stream to ca0132, audio will be
heard from two ports simultaneously.
Fix this issue by change to use snd_hda_codec_setup_stream
and snd_hda_codec_cleanup_stream instead, so that an
inactive stream can be marked as 'dirty' when found
with a conflict stream tag, and then get purified.
Signed-off-by: Hsin-Yu Chao <hychao@chromium.org>
Reviewed-by: Chih-Chung Chang <chihchung@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Mark Brown [Wed, 19 Feb 2014 04:13:58 +0000 (13:13 +0900)]
Merge remote-tracking branch 'asoc/fix/wm8993' into asoc-linus
Mark Brown [Wed, 19 Feb 2014 04:13:52 +0000 (13:13 +0900)]
Merge remote-tracking branches 'asoc/fix/blackfin', 'asoc/fix/da9055', 'asoc/fix/davinci', 'asoc/fix/fsl', 'asoc/fix/fsl-esai', 'asoc/fix/max98090', 'asoc/fix/rt5640', 'asoc/fix/samsung' and 'asoc/fix/txx9aclc-ac97' into asoc-linus
Hui Wang [Tue, 18 Feb 2014 02:56:46 +0000 (10:56 +0800)]
ALSA: hda - add headset mic detect quirks for two Dell laptops
When we plug a 3-ring headset on the Dell machines (Vendor ID:
0x10ec0255, Subsystem ID: 0x10280657; Vendor ID: 0x10ec0255,
Subsystem ID: 0x1028065f), the headset mic can't be
detected, after apply this patch, the headset mic can work well.
BugLink: https://bugs.launchpad.net/bugs/1260303
Cc: David Henningsson <david.henningsson@canonical.com>
Tested-by: Cyrus Lien <cyrus.lien@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 14 Feb 2014 08:05:47 +0000 (09:05 +0100)]
ALSA: usx2y: Don't peep the card internal object
Avoid traversing the device object list of the card instance just for
checking the PCM streams. The driver's private object already
contains the array of substream pointers, so it can be simply looked
through. The card internal may be restructured in future, thus better
not to rely on it.
Also, this fixes the possible deadlocks in PCM mutex. Instead of
taking multiple PCM mutexes, just take the common mutex in all
places. Along with it, rename prepare_mutex as pcm_mutex.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Clemens Ladisch [Sun, 16 Feb 2014 16:11:10 +0000 (17:11 +0100)]
ALSA: usb-audio: work around KEF X300A firmware bug
When the driver tries to access Function Unit 10, the KEF X300A
speakers' firmware apparently locks up, making even PCM streaming
impossible. Work around this by ignoring this FU.
Cc: <stable@vger.kernel.org>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Linus Torvalds [Sun, 16 Feb 2014 21:30:25 +0000 (13:30 -0800)]
Linux 3.14-rc3
Linus Torvalds [Sun, 16 Feb 2014 19:05:27 +0000 (11:05 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
"We have a small collection of fixes in my for-linus branch.
The big thing that stands out is a revert of a new ioctl. Users
haven't shipped yet in btrfs-progs, and Dave Sterba found a better way
to export the information"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: use right clone root offset for compressed extents
btrfs: fix null pointer deference at btrfs_sysfs_add_one+0x105
Btrfs: unset DCACHE_DISCONNECTED when mounting default subvol
Btrfs: fix max_inline mount option
Btrfs: fix a lockdep warning when cleaning up aborted transaction
Revert "btrfs: add ioctl to export size of global metadata reservation"
Linus Torvalds [Sun, 16 Feb 2014 19:03:58 +0000 (11:03 -0800)]
Merge tag 'dt-fixes-for-3.14' of git://git./linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
"Fix booting on PPC boards. Changes to of_match_node matching caused
the serial port on some PPC boards to stop working. Reverted the
change and reimplement to split matching between new style compatible
only matching and fallback to old matching algorithm"
* tag 'dt-fixes-for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: search the best compatible match first in __of_match_node()
Revert "OF: base: match each node compatible against all given matches first"
Stephen Warren [Thu, 13 Feb 2014 23:54:24 +0000 (16:54 -0700)]
ASoC: max98090: make REVISION_ID readable
The REVISION_ID register is not currently marked readable. snd_soc_read()
refuses to read the register, and hence probe() fails.
Fixes: d4807ad2c4c0 ("regmap: Check readable regs in _regmap_read")
[exposed the bug, by checking for readability]
Fixes: 685e42154dcf ("ASoC: Replace max98090 Device Driver")
[left out this register from the readable list]
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Kevin Hao [Fri, 14 Feb 2014 05:22:46 +0000 (13:22 +0800)]
of: search the best compatible match first in __of_match_node()
Currently, of_match_node compares each given match against all node's
compatible strings with of_device_is_compatible.
To achieve multiple compatible strings per node with ordering from
specific to generic, this requires given matches to be ordered from
specific to generic. For most of the drivers this is not true and also
an alphabetical ordering is more sane there.
Therefore, this patch introduces a function to match each of the node's
compatible strings against all given compatible matches without type and
name first, before checking the next compatible string. This implies
that node's compatibles are ordered from specific to generic while
given matches can be in any order. If we fail to find such a match
entry, then fall-back to the old method in order to keep compatibility.
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Tested-by: Stephen Chivers <schivers@csc.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Alexander Shiyan [Sat, 15 Feb 2014 19:28:29 +0000 (23:28 +0400)]
ASoC: txx9aclc_ac97: Fix kernel crash on probe
This patch fixes a crash caused by commit
3bed3344c826
(ASoC: txx9aclc_ac97: Convert to devm_ioremap_resource()).
This is an attempt to assign "drvdata->base" while memory
for "drvdata" is not already allocated.
Fixes: 3bed3344c826 (ASoC: txx9aclc_ac97: Convert to devm_ioremap_resource())
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Mark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org
Linus Torvalds [Sun, 16 Feb 2014 00:18:47 +0000 (16:18 -0800)]
Merge git://git./linux/kernel/git/nab/target-pending
Pull SCSI target fixes from Nicholas Bellinger:
"Mostly minor fixes this time to v3.14-rc1 related changes. Also
included is one fix for a free after use regression in persistent
reservations UNREGISTER logic that is CC'ed to >= v3.11.y stable"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
Target/sbc: Fix protection copy routine
IB/srpt: replace strict_strtoul() with kstrtoul()
target: Simplify command completion by removing CMD_T_FAILED flag
iser-target: Fix leak on failure in isert_conn_create_fastreg_pool
iscsi-target: Fix SNACK Type 1 + BegRun=0 handling
target: Fix missing length check in spc_emulate_evpd_83()
qla2xxx: Remove last vestiges of qla_tgt_cmd.cmd_list
target: Fix 32-bit + CONFIG_LBDAF=n link error w/ sector_div
target: Fix free-after-use regression in PR unregister
Linus Torvalds [Sun, 16 Feb 2014 00:17:51 +0000 (16:17 -0800)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"i2c has a bugfix and documentation improvements for you"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
Documentation: i2c: mention ACPI method for instantiating devices
Documentation: i2c: describe devicetree method for instantiating devices
i2c: mv64xxx: refactor message start to ensure proper initialization
Linus Torvalds [Sun, 16 Feb 2014 00:06:12 +0000 (16:06 -0800)]
Merge branches 'irq-urgent-for-linus' and 'irq-core-for-linus' of git://git./linux/kernel/git/tip/tip
Pull irq update from Thomas Gleixner:
"Fix from the urgent branch: a trivial oneliner adding the missing
Kconfig dependency curing build failures which have been discovered by
several build robots.
The update in the irq-core branch provides a new function in the
irq/devres code, which is a prerequisite for driver developers to get
rid of boilerplate code all over the place.
Not a bugfix, but it has zero impact on the current kernel due to the
lack of users. It's simpler to provide the infrastructure to
interested parties via your tree than fulfilling the wishlist of
driver maintainers on which particular commit or tag this should be
based on"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Add missing irq_to_desc export for CONFIG_SPARSE_IRQ=n
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Add devm_request_any_context_irq()
Linus Torvalds [Sun, 16 Feb 2014 00:04:42 +0000 (16:04 -0800)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"The following trilogy of patches brings you:
- fix for a long standing math overflow issue with HZ < 60
- an onliner fix for a corner case in the dreaded tick broadcast
mechanism affecting a certain range of AMD machines which are
infested with the infamous automagic C1E power control misfeature
- a fix for one of the ARM platforms which allows the kernel to
proceed and boot instead of stupidly panicing for no good reason.
The patch is slightly larger than necessary, but it's less ugly
than the alternative 5 liner"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick: Clear broadcast pending bit when switching to oneshot
clocksource: Kona: Print warning rather than panic
time: Fix overflow when HZ is smaller than 60
Linus Torvalds [Sat, 15 Feb 2014 23:03:34 +0000 (15:03 -0800)]
Merge tag 'trace-fixes-v3.14-rc2' of git://git./linux/kernel/git/rostedt/linux-trace
Pull twi tracing fixes from Steven Rostedt:
"Two urgent fixes in the tracing utility.
The first is a fix for the way the ring buffer stores timestamps.
After a restructure of the code was done, the ring buffer timestamp
logic missed the fact that the first event on a sub buffer is to have
a zero delta, as the full timestamp is stored on the sub buffer
itself. But because the delta was not cleared to zero, the timestamp
for that event will be calculated as the real timestamp + the delta
from the last timestamp. This can skew the timestamps of the events
and have them say they happened when they didn't really happen.
That's bad.
The second fix is for modifying the function graph caller site. When
the stop machine was removed from updating the function tracing code,
it missed updating the function graph call site location. It is still
modified as if it is being done via stop machine. But it's not. This
can lead to a GPF and kernel crash if the function graph call site
happens to lie between cache lines and one CPU is executing it while
another CPU is doing the update. It would be a very hard condition to
hit, but the result is severe enough to have it fixed ASAP"
* tag 'trace-fixes-v3.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace/x86: Use breakpoints for converting function graph caller
ring-buffer: Fix first commit on sub-buffer having non-zero delta
Linus Torvalds [Sat, 15 Feb 2014 23:02:28 +0000 (15:02 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 EFI fixes from Peter Anvin:
"A few more EFI-related fixes"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/efi: Check status field to validate BGRT header
x86/efi: Fix 32-bit fallout
Linus Torvalds [Sat, 15 Feb 2014 23:01:33 +0000 (15:01 -0800)]
Merge tag 'fixes-for-linus' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Kevin Hilman:
"A collection of ARM SoC fixes for v3.14-rc1.
Mostly a collection of Kconfig, device tree data and compilation fixes
along with fix to drivers/phy that fixes a boot regression on some
Marvell mvebu platforms"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
dma: mv_xor: Silence a bunch of LPAE-related warnings
ARM: ux500: disable msp2 device tree node
ARM: zynq: Reserve not DMAable space in front of the kernel
ARM: multi_v7_defconfig: Select CONFIG_SOC_DRA7XX
ARM: imx6: Initialize low-power mode early again
ARM: pxa: fix various compilation problems
ARM: pxa: fix compilation problem on AM300EPD board
ARM: at91: add Atmel's SAMA5D3 Xplained board
spi/atmel: document clock properties
mmc: atmel-mci: document clock properties
ARM: at91: enable USB host on at91sam9n12ek board
ARM: at91/dt: fix sama5d3 ohci hclk clock reference
ARM: at91/dt: sam9263: fix compatibility string for the I2C
ata: sata_mv: Fix probe failures with optional phys
drivers: phy: Add support for optional phys
drivers: phy: Make NULL a valid phy reference
ARM: fix HAVE_ARM_TWD selection for OMAP and shmobile
ARM: moxart: move DMA_OF selection to driver
ARM: hisi: fix kconfig warning on HAVE_ARM_TWD
Wolfram Sang [Sat, 15 Feb 2014 14:58:35 +0000 (15:58 +0100)]
Documentation: i2c: mention ACPI method for instantiating devices
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Wolfram Sang [Mon, 10 Feb 2014 10:03:55 +0000 (11:03 +0100)]
Documentation: i2c: describe devicetree method for instantiating devices
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Filipe David Borba Manana [Sat, 15 Feb 2014 15:53:16 +0000 (15:53 +0000)]
Btrfs: use right clone root offset for compressed extents
For non compressed extents, iterate_extent_inodes() gives us offsets
that take into account the data offset from the file extent items, while
for compressed extents it doesn't. Therefore we have to adjust them before
placing them in a send clone instruction. Not doing this adjustment leads to
the receiving end requesting for a wrong a file range to the clone ioctl,
which results in different file content from the one in the original send
root.
Issue reproducible with the following excerpt from the test I made for
xfstests:
_scratch_mkfs
_scratch_mount "-o compress-force=lzo"
$XFS_IO_PROG -f -c "truncate 118811" $SCRATCH_MNT/foo
$XFS_IO_PROG -c "pwrite -S 0x0d -b 39987 92267 39987" $SCRATCH_MNT/foo
$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/mysnap1
$XFS_IO_PROG -c "pwrite -S 0x3e -b 80000 200000 80000" $SCRATCH_MNT/foo
$BTRFS_UTIL_PROG filesystem sync $SCRATCH_MNT
$XFS_IO_PROG -c "pwrite -S 0xdc -b 10000 250000 10000" $SCRATCH_MNT/foo
$XFS_IO_PROG -c "pwrite -S 0xff -b 10000 300000 10000" $SCRATCH_MNT/foo
# will be used for incremental send to be able to issue clone operations
$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/clones_snap
$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/mysnap2
$FSSUM_PROG -A -f -w $tmp/1.fssum $SCRATCH_MNT/mysnap1
$FSSUM_PROG -A -f -w $tmp/2.fssum -x $SCRATCH_MNT/mysnap2/mysnap1 \
-x $SCRATCH_MNT/mysnap2/clones_snap $SCRATCH_MNT/mysnap2
$FSSUM_PROG -A -f -w $tmp/clones.fssum $SCRATCH_MNT/clones_snap \
-x $SCRATCH_MNT/clones_snap/mysnap1 -x $SCRATCH_MNT/clones_snap/mysnap2
$BTRFS_UTIL_PROG send $SCRATCH_MNT/mysnap1 -f $tmp/1.snap
$BTRFS_UTIL_PROG send $SCRATCH_MNT/clones_snap -f $tmp/clones.snap
$BTRFS_UTIL_PROG send -p $SCRATCH_MNT/mysnap1 \
-c $SCRATCH_MNT/clones_snap $SCRATCH_MNT/mysnap2 -f $tmp/2.snap
_scratch_unmount
_scratch_mkfs
_scratch_mount
$BTRFS_UTIL_PROG receive $SCRATCH_MNT -f $tmp/1.snap
$FSSUM_PROG -r $tmp/1.fssum $SCRATCH_MNT/mysnap1 2>> $seqres.full
$BTRFS_UTIL_PROG receive $SCRATCH_MNT -f $tmp/clones.snap
$FSSUM_PROG -r $tmp/clones.fssum $SCRATCH_MNT/clones_snap 2>> $seqres.full
$BTRFS_UTIL_PROG receive $SCRATCH_MNT -f $tmp/2.snap
$FSSUM_PROG -r $tmp/2.fssum $SCRATCH_MNT/mysnap2 2>> $seqres.full
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Chris Mason <clm@fb.com>
Anand Jain [Wed, 15 Jan 2014 09:22:28 +0000 (17:22 +0800)]
btrfs: fix null pointer deference at btrfs_sysfs_add_one+0x105
bdev is null when disk has disappeared and mounted with
the degrade option
stack trace
---------
btrfs_sysfs_add_one+0x105/0x1c0 [btrfs]
open_ctree+0x15f3/0x1fe0 [btrfs]
btrfs_mount+0x5db/0x790 [btrfs]
? alloc_pages_current+0xa4/0x160
mount_fs+0x34/0x1b0
vfs_kern_mount+0x62/0xf0
do_mount+0x22e/0xa80
? __get_free_pages+0x9/0x40
? copy_mount_options+0x31/0x170
SyS_mount+0x7e/0xc0
system_call_fastpath+0x16/0x1b
---------
reproducer:
-------
mkfs.btrfs -draid1 -mraid1 /dev/sdc /dev/sdd
(detach a disk)
devmgt detach /dev/sdc [1]
mount -o degrade /dev/sdd /btrfs
-------
[1] github.com/anajain/devmgt.git
Signed-off-by: Anand Jain <Anand.Jain@oracle.com>
Tested-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Wolfram Sang [Thu, 13 Feb 2014 20:36:29 +0000 (21:36 +0100)]
i2c: mv64xxx: refactor message start to ensure proper initialization
Because the offload mechanism can fall back to a standard transfer,
having two seperate initialization states is unfortunate. Let's just
have one state which does things consistently. This fixes a bug where
some preparation was missing when the fallback happened. And it makes
the code much easier to follow. To implement this, we put the check
if offload is possible at the top of the offload setup function.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Cc: stable@vger.kernel.org # v3.12+
Fixes: 930ab3d403ae (i2c: mv64xxx: Add I2C Transaction Generator support)
Takashi Iwai [Sat, 15 Feb 2014 09:12:12 +0000 (10:12 +0100)]
ALSA: hda - Remove superfluous inclusion of linux/pci.h
Some codec drivers still have it since using PCI_VENDOR_ID_*.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Sat, 15 Feb 2014 09:03:19 +0000 (10:03 +0100)]
ALSA: hda/realtek - Allow NULL bus->pci
Realtek codec driver contains some codes referring to the PCI
subdevice IDs, but most of them are optional, typically for checking
the codec name variants. Add NULL checks appropriately so that it can
work without PCI assignment.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This page took 0.045615 seconds and 5 git commands to generate.