Philipp Zabel [Mon, 8 Apr 2013 16:04:34 +0000 (18:04 +0200)]
staging: drm/imx: ipu-di: add comments explaining signal generator configuration
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Philipp Zabel [Mon, 8 Apr 2013 16:04:33 +0000 (18:04 +0200)]
staging: drm/imx: ipuv3-crtc: use external clock for TV Encoder
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Philipp Zabel [Mon, 8 Apr 2013 16:04:32 +0000 (18:04 +0200)]
staging: drm/imx: ipu-dc: add 24-bit GBR support to DC
24-bit GBR order is needed on the display interface connected
to the Television Encoder (TVEv2) on i.MX53.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Shevchenko [Tue, 9 Apr 2013 12:22:16 +0000 (15:22 +0300)]
staging: speakup: fix a bug when translate octal numbers
There are actually overflow bug and typo. And bug was never happened due to the
typo.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 9 Apr 2013 19:20:43 +0000 (12:20 -0700)]
Merge tag 'iio-for-3.10d' of git://git./linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Fourth set of changes for iio in the 3.10 cycle. This time just a fix an
a cleanup.
The fix is to the dummy driver for some inconsistent specification of
parameters available vs parameters supplied.
The cleanup is for some silly memcmp usage.
Jin Feng [Fri, 5 Apr 2013 04:51:00 +0000 (05:51 +0100)]
staging:iio:dummy: Fix mismatch and export sysfs entry
Correct the mismatch bewteen calibscale and calibbias, and export
the in_accel_calibscale sysfs entry
Updated to apply to current tree.
Signed-off-by: Jin Feng <jin88.feng@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Luck, Tony [Thu, 4 Apr 2013 21:37:00 +0000 (22:37 +0100)]
staging:iio:adt7316 Fix some 'interesting' string operations
Calling memcmp() to check the value of the first byte in a string is overkill.
Just use buf[0] == '1' or buf[0] != '1' as appropriate.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
H Hartley Sweeten [Mon, 8 Apr 2013 17:57:35 +0000 (10:57 -0700)]
staging: comedi: remove unnecessary dev->board_name initialization
The dev->board_name is now initialized by the comedi core before calling
the(*attach) or (*auto_attach) function in a driver. As long as the driver
does no additional probing, it's no longer necessary initialize the board_name.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 8 Apr 2013 17:56:20 +0000 (10:56 -0700)]
staging: comedi: comedi_pci: dev->board_name is always valid
The dev->board_name is always initialized before calling the(*attach)
or (*auto_attach) function. It's no longer necessary to validate the
pointer in comedi_pci_enable().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 8 Apr 2013 17:56:02 +0000 (10:56 -0700)]
staging: comedi: drivers: dev->board_name is always valid
The dev->board_name is always initialized before calling the(*attach)
or (*auto_attach) function. The "BUG" check in comedi_device_postconfig()
is no longer necessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 8 Apr 2013 17:55:29 +0000 (10:55 -0700)]
staging: comedi: drivers: set dev->board_name before attaching
The comedi (*attach) and (*auto_attach) functions are used to attach
legacy and PnP type devices to the comedi subsystem. If we can set the
dev->board_name before doing the attach, the drivers will not have to
worry about doing it.
Drivers that do additional probing can still change the dev->board_name
if necessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 8 Apr 2013 17:55:05 +0000 (10:55 -0700)]
staging: comedi: drivers: rename 'comedi_dev' in comedi_auto_config()
The struct comedi_device pointer in this file, and the rest of the
comedi subsystem, is typically called 'dev'. Rename the local variable
'comedi_dev' in comedi_auto_config() for consistency.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eduardo Valentin [Mon, 8 Apr 2013 12:19:14 +0000 (08:19 -0400)]
staging: ti-soc-thermal: fix device removal
While removing, the device needs to unregister
the sensor from thermal framework. Before
calling the call back the driver needs to check
if the call back is registered. This patch
fix the check by checking the right callback.
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eduardo Valentin [Mon, 8 Apr 2013 12:19:13 +0000 (08:19 -0400)]
staging: ti-soc-thermal: defer probe if cpufreq is not ready
When builtin compiled, there is a chance for this driver
be probed before cpufreq driver is up and running. In this
case, the cpucooling device can be wrong initialized.
Thus, this patch makes sure this driver is probed only
when cpufreq driver is ready. Whenever there is no
cpufreq driver registered, the probe will return -EPROBE_DEFER.
Tested-by: J Keerthy <j-keerthy@ti.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eduardo Valentin [Mon, 8 Apr 2013 12:19:12 +0000 (08:19 -0400)]
staging: ti-soc-thermal: remove extrapolation rules from TODO
Extrapolation rules have been revisited.
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eduardo Valentin [Mon, 8 Apr 2013 12:19:11 +0000 (08:19 -0400)]
staging: ti-soc-thermal: update OMAP5 extrapolation rules
Update the constants to the correct hotspot extrapolation
equation constants. OMAP4 constants are revisited and correct.
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eduardo Valentin [Mon, 8 Apr 2013 12:19:10 +0000 (08:19 -0400)]
staging: ti-soc-thermal: introduce OMAP4430 extrapolation constants
This patch defines and utilizes the extrapolation constants for OMAP4430.
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eduardo Valentin [Mon, 8 Apr 2013 12:19:09 +0000 (08:19 -0400)]
staging: ti-soc-thermal: Remove TC1/TC2 TODO (already done)
TC1/TC2 are not needed anymore, API has been upgraded.
This is a TODO left-over.
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eduardo Valentin [Mon, 8 Apr 2013 12:19:08 +0000 (08:19 -0400)]
staging: ti-soc-thermal: fix min/max TODO (already done)
Min/Max cooling state are defined by registration helper
function, if no specific limits are passed. No need to change
this code.
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eduardo Valentin [Mon, 8 Apr 2013 12:19:07 +0000 (08:19 -0400)]
staging: ti-soc-thermal: update TODO list
This patch removes out of the TODO list those already completed.
Here is the status and why they are removed:
on ti-bandgap.c:
-- Add support to hwmon: REMOVED, no need to have hwmon interfaces as
the control is done via thermal framework.
-- Test every exposed API to userland: DONE, via thermal fw APIs
By now, no specific API is exposed by this driver
-- Revisit data structures and simplify them: DONE, all
unused fields are flagged for future removal.
-- Once SCM-core api settles, update this driver accordingly: DONE,
the BG driver can exist without SCM driver by ioremapping its own
registers and doing its own locking.
on ti-thermal-common.c/ti-thermal.h:
-- Revisit trips and its definitions: DONE, for now there is no
need to change current definition. Alert based policy will be add
in future.
-- Revisit trending: DONE, OMAP5 history buffer support has been
implemented. Devices without history buffer will use thermal fw
trending capability.
on omap5-thermal.c
-- Add support for GPU cooling: REMOVED: this will not be part
of this driver. Must be done in a separated cooling device.
generally:
-- make checkpatch.pl and sparse happy: DONE, sparse remaining
warning is not an issue.
-- update documentation: DONE, kernel-doc for ti-bandgap is now
available.
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Valentin Ilie [Mon, 8 Apr 2013 10:49:21 +0000 (13:49 +0300)]
staging/fwserial: Replace seq_printf with seq_puts
Fix checkpatch warning about seq_printf.
Signed-off-by: Valentin Ilie <valentin.ilie@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chen Gang [Sun, 7 Apr 2013 10:01:48 +0000 (18:01 +0800)]
Drivers: Staging: cxt1e1: strncpy issue, need set zero at the end.
need set '\0' at the end. or cause issue.
it is called by c4_ioctl in drivers/staging/cxt1e1/linux.c
all things need be initialized, before provide them to user mode.
so we can not use strlcpy instead of strncpy.
code style:
all contents of the file use 4 spaces instead of '\t',
so this patch has to follow, now.
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Sat, 6 Apr 2013 00:36:40 +0000 (17:36 -0700)]
staging: comedi: ni_at_a2150: remove 'thisboard' macro
The 'thisboard' macro relies on a local variable having a specific
name and yields a pointer derived from that local variable.
Replace the macro with local variables and use the comedi_board()
helper to get the pointer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Sat, 6 Apr 2013 00:36:22 +0000 (17:36 -0700)]
staging: comedi: dt282x: remove 'boardtype' macro
The 'boardtype' macro relies on a local variable having a specific
name and yields a struct derived from that local variable.
Replace the macro with local variables and use the comedi_board()
helper to get the struct as a pointer. Use pointer access when
using the variable.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Sat, 6 Apr 2013 00:36:03 +0000 (17:36 -0700)]
staging: comedi: dt2801: remove 'boardtype' macro
The 'boardtype' macro relies on a local variable having a specific
name and yields a struct derived from that local variable.
Replace the macro with local variables and use the comedi_board()
helper to get the struct as a pointer. Use pointer access when
using the variable.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Sat, 6 Apr 2013 00:35:44 +0000 (17:35 -0700)]
staging: comedi: das800: remove 'thisboard' macro
The 'thisboard' macro relies on a local variable having a specific
name and yields a pointer derived from that local variable.
Replace the macro with local variables and use the comedi_board()
helper to get the pointer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Sat, 6 Apr 2013 00:35:22 +0000 (17:35 -0700)]
staging: comedi: das1800: remove 'thisboard' macro
The 'thisboard' macro relies on a local variable having a specific
name and yields a pointer derived from that local variable.
Replace the macro with local variables and use the comedi_board()
helper to get the pointer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 5 Apr 2013 23:13:23 +0000 (16:13 -0700)]
staging: comedi: serial2002: remove #if 0'ed out code
This function is not used. Just remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 5 Apr 2013 23:12:52 +0000 (16:12 -0700)]
staging: comedi: serial2002: remove pr_err() noise in serial2002_read()
This pr_err() is just added noise, the user can't do anything about it.
Just remove it.
Since this is the only pr_level() message in the driver, also remove
the pr_fmt() macro.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 5 Apr 2013 23:12:10 +0000 (16:12 -0700)]
staging: comedi: serial2002: rename all the static functions
Many of the static functions in this driver have names that could
potentially clash with external symbols (tty_ioctl, tty_write, etc.).
Rename all the static functions so they have a 'serial2002_' prefix
to avoid any issues.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 5 Apr 2013 23:11:50 +0000 (16:11 -0700)]
staging: comedi: serial2002: hookup the (*open) and (*close) last
For aesthetic reasons, hookup the comedi_device (*open) and (*close)
functions after everything else in the attach has succeeded.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 5 Apr 2013 23:11:13 +0000 (16:11 -0700)]
staging: comedi: serial2002: return 0 after successful attach
A return value of >=0 indicates a successful attach to the comedi core.
Return 0 since that is more common in the kernel.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 5 Apr 2013 23:10:42 +0000 (16:10 -0700)]
staging: comedi: serial2002: remove attach dev_dbg() noise
This is just added noise. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 5 Apr 2013 23:10:22 +0000 (16:10 -0700)]
staging: comedi: serial2002: add some whitespace to the subdevice init
To improve the readability, add some whitespace to the subdevice
init.
Also, for aesthetic reasons and the help with greps, rename the
(*insn_{read,write}) functions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 5 Apr 2013 23:10:01 +0000 (16:10 -0700)]
staging: comedi: serial2002: don't assume the number of subdevices to detach
Use the number of subdevices allocated (dev->n_subdevices) in the
(*detach) instead of assuming a given number.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 5 Apr 2013 23:09:40 +0000 (16:09 -0700)]
staging: comedi: serial2002: cleanup serial2002_setup_subdevs()
Define and document the bit shifts of the serial.data read from
the device that is used to configure the subdevice channels.
Use the new defines to tidy up the configuration process.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 5 Apr 2013 23:09:15 +0000 (16:09 -0700)]
staging: comedi: serial2002: split up serial_2002_open()
Split out the code that sets up the comedi subdevices that are
attached to the serial port.
There are actually two steps:
1) Read the configuration of the attached subdevices.
2) Use the configuration data to setup the comedi subdevices.
Step 1 is split out as serial2002_setup_subdevs().
Step 2 is split out as serial2002_setup_subdevice().
Cleanup the split out code to remove all the extra '{ }' and indents.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 5 Apr 2013 23:08:51 +0000 (16:08 -0700)]
staging: comedi: serial2002: cleanup serial_read()
Remove the unnecessary '{ }' around the code and the extra indents
in the switch().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 5 Apr 2013 23:08:32 +0000 (16:08 -0700)]
staging: comedi: serial2002: cleanup tty_setspeed()
Rename the two local variables used to set the serial port speed
and latency so thy are unique.
Remove the unnecessary '{ }' around the code and the extra indents.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 5 Apr 2013 23:08:13 +0000 (16:08 -0700)]
staging: comedi: serial2002: factor (*poll) busy wait out of tty_read()
Factor the (*poll) busy wait code out of tty_read() so the indent
level can be reduced and tty_read() is a bit cleaner.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 5 Apr 2013 23:07:49 +0000 (16:07 -0700)]
staging: comedi: serial2002: fix different address space sparse warnings
The struct file_operations (*read) and (*write) operations expect the
buffer to be a __user space pointer.
Currently the (*write) operations in this driver cause this warning:
warning: incorrect type in argument 2 (different address spaces)
expected char const [noderef] <asn:1>*<noident>
got unsigned char [usertype] *buf
And the (*read) operations cause this warning:
warning: incorrect type in argument 2 (different address spaces)
expected char [noderef] <asn:1>*<noident>
got unsigned char *<noident>
Use __force to cast the buffer to a __user pointer to suppress the
warnings.
Consolidate the (*read) calls into a helper function, __tty_readb().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masanari Iida [Mon, 8 Apr 2013 14:16:36 +0000 (23:16 +0900)]
staging:csr: Fix typo in staging/csr driver
Correct spelling typo in comment within staging/csr
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lars-Peter Clausen [Mon, 8 Apr 2013 07:56:07 +0000 (09:56 +0200)]
staging: cptm1217: Use dev_pm_ops
Use dev_pm_ops instead of the deprecated legacy suspend/resume callbacks.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Valentin Ilie [Fri, 5 Apr 2013 12:42:26 +0000 (15:42 +0300)]
staging: speakup: selection.c fix typo in comment
Replace disallocated with deallocated
Signed-off-by: Valentin Ilie <valentin.ilie@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Thu, 4 Apr 2013 13:59:18 +0000 (14:59 +0100)]
staging: comedi: add comedi_clear_board_dev()
Add local function `comedi_clear_board_dev()` as a safer alternative to
`comedi_clear_board_minor()` when we already have a pointer to a `struct
comedi_device`. It uses the board minor device number stored in the
`struct comedi_device` (which must have already been initialized) and
only clears the entry in `comedi_board_minor_table[]` if it points to
the specified `struct comedi_device`. Rather than returning the old
table entry, it returns `true` if the entry matched (and so has just
been cleared) and returns `false` otherwise.
Call `comedi_clear_board_dev()` instead of `comedi_clear_board_minor()`
in `comedi_unlocked_ioctl()` (in the code that frees a dynamically
allocated comedi device detached by the `COMEDI_DEVCONFIG` ioctl). That
ought to return `true` but check it just in case before freeing the
device. There is still a race condition here which needs to be dealt
with once we've implemented reference counting for `struct
comedi_device`s.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Thu, 4 Apr 2013 13:59:17 +0000 (14:59 +0100)]
staging: comedi: remove struct comedi_file_info
`struct comedi_file_info` is no longer used so remove it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Thu, 4 Apr 2013 13:59:16 +0000 (14:59 +0100)]
staging: comedi: simplify comedi_board_minor_table[]
`comedi_alloc_board_minor()` allocates and initializes a `struct
comedi_file_info` and a `struct comedi_device`, and assigns a board
minor device number (if there are any available), storing a pointer to
the allocated `struct comedi_file_info` in
`comedi_board_minor_table[minor]` where `minor` is the board minor
device number.
There is no longer anything useful in the `struct comedi_file_info`
apart from the pointer to the `struct comedi_device` that was allocated,
so the `struct comedi_file_info` is superfluous.
Change `comedi_board_minor_table[]` to hold pointers to the actual
`struct comedi_device`'s. `comedi_alloc_board_minor()` no longer needs
to allocate a `struct comedi_file_info`. Replace
`comedi_free_board_file_info()` with `comedi_free_board_dev()` with its
parameter pointing to the `struct comedi_device` to be freed (there is
no longer a `struct comedi_file_info` to be freed).
There are consequential changes to `comedi_dev_from_board_minor()`,
`comedi_clear_board_minor()` (which now returns a `struct comedi_device
*`), `comedi_free_board_minor()`, `comedi_release_hardware_device()` and
`comedi_unlocked_ioctl()` (when dealing with detachment of a dynamically
allocated comedi device by the `COMEDI_DEVCONFIG` ioctl).
`comedi_dev_from_file_info()` is no longer used as a result of the above
changes so remove it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Thu, 4 Apr 2013 13:59:15 +0000 (14:59 +0100)]
staging: comedi: simplify comedi_subdevice_minor_table[]
`comedi_alloc_subdevice_minor()` allocates and initializes a `struct
comedi_file_info` and assigns a subdevice minor device number (if there
are any available), storing a pointer to the allocated `struct
comedi_file_info` in `comedi_subdevice_minor_table[i]` where `i` is the
array index corresponding to the subdevice minor device number (indexed
by subdevice minor device number minus `COMEDI_NUM_BOARD_MINORS`).
The information stored in the `struct comedi_file_info` can be derived
from the subdevice structure (`struct comedi_subdevice`) itself, so the
`struct comedi_file_info` is superfluous.
Change `comedi_subdevice_minor_table[]` to hold pointers to the actual
`struct comedi_subdevice`'s. `comedi_alloc_subdevice_minor()` no longer
needs to allocate a `struct comedi_file_info` and
`comedi_free_subdevice_info()` no longer has a `struct comedi_file_info`
to free.
Replace `comedi_file_info_from_minor()` with
`comedi_subdevice_from_minor()`, returning a (possibly NULL) pointer to
a `struct comedi_subdevice` from the table. This has knock-on effects
for `comedi_dev_from_subdevice_minor()`, `comedi_read_subdevice()` and
`comedi_write_subdevice()`. In particular, `comedi_read_subdevice()`
and `comedi_write_subdevice()` now need to check the subdevice flags to
see if the determine whether to override the comedi device's default
read/write subdevice.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Thu, 4 Apr 2013 13:59:14 +0000 (14:59 +0100)]
staging: comedi: remove comedi_file_info_from_board_minor()
Merge the code from `comedi_file_info_from_board_minor()` into
`comedi_dev_from_board_minor()` and remove it since nothing else calls
it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Thu, 4 Apr 2013 13:59:13 +0000 (14:59 +0100)]
staging: comedi: remove comedi_clear_subdevice_minor()
Merge the code from `comedi_clear_subdevice_minor()` into
`comedi_free_subdevice_minor()` and remove it since nothing else calls
it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Thu, 4 Apr 2013 13:59:12 +0000 (14:59 +0100)]
staging: comedi: refactor comedi_dev_from_minor()
Refactor `comedi_dev_from_minor()` to call one of two new functions
`comedi_dev_from_board_minor()` (for minor device numbers less than
`COMEDI_NUM_BOARD_MINORS`) or `comedi_dev_from_subdevice_minor()` (for
minor device numbers greater than or equal to `COMEDI_NUM_BOARD_MINORS`,
which are subdevice minor device numbers).
Remove `comedi_file_info_from_minor()` as it is no longer used.
This is a step towards removing `struct comedi_file_info`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Thu, 4 Apr 2013 13:59:11 +0000 (14:59 +0100)]
staging: comedi: reduce use of struct comedi_file_info
Since the parameters of `comedi_read_subdevice()` and
`comedi_write_subdevice()` have changed, there is no longer a need to
keep a local variable `struct comedi_file_info *info` hanging around in
the file operation functions and device attribute access functions.
Remove the variable from those function and replace the call sequence
`info = comedi_file_info_from_minor(minor)`, `dev =
comedi_dev_from_file_info(info)` with the simpler `dev =
comedi_dev_from_minor(minor)`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Thu, 4 Apr 2013 13:59:10 +0000 (14:59 +0100)]
staging: comedi: change comedi_read/write_subdevice() parameters
`comedi_read_subdevice()` and `comedi_write_subdevice()` currently take
a single parameter pointing to a `struct comedi_file_info`. I'm trying
to get rid of `struct comedi_file_info` so as part of that plan,
`comedi_read_subdevice()` and `comedi_write_subdevice()` need to change.
Change them to take two parameters: a pointer to a `struct
comedi_device` and a minor device number. If the minor device number is
a "board" minor device number (`minor < COMEDI_NUM_BOARD_MINORS`) we'll
always return the default read or write subdevice. If the minor device
number if a "subdevice" minor device number a different read or write
subdevice may be returned. In that case, use the subdevice minor device
number to look up the information about whether the default read or
write subdevice needs to be overridden.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Thu, 4 Apr 2013 13:59:09 +0000 (14:59 +0100)]
staging: comedi: use minor device number in attribute functions
The comedi device attribute functions such as
`show_max_read_buffer_kb()` call `dev_get_drvdata()` to get a pointer to
a `struct comedi_file_info` from the private driver data field of class
device. Change them to use the minor device number to look up this
pointer value so they behave more like the file operation functions.
Check the pointer is non-NULL as the entry in the minor device table
could have been set to NULL. Note that there is still a race condition
in the use of this pointer value after acquiring the mutex which needs
to be dealt with once reference counting has been implemented for comedi
devices.
The calls to `dev_set_drvdata()` from `comedi_alloc_board_minor()` and
`comedi_alloc_subdevice_minor()` are no longer needed so remove them.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Thu, 4 Apr 2013 13:59:08 +0000 (14:59 +0100)]
staging: comedi: get mutex before subdevice in attribute functions
The comedi device attribute functions such as
`show_read_buffer_kb()` or `show_write_buffer_kb()` call
`comedi_read_subdevice()` or `comedi_write_subdevice()` without
acquiring the comedi device's mutex first, although the functions do
acquire the mutex afterwards. Change them to acquire the mutex first.
This is consistent with most of the comedi device file operation
functions (apart from `comedi_read()` and `comedi_write()` which
probably need looking at).
Despite the use of the mutex, there are still race conditions as the
`struct comedi_file_info *info` variable value set before acquiring the
mutex could be stale after acquiring the mutex. This problem will be
dealt with once reference counting has been implemented for the comedi
devices.
This patch also adds local variable `struct comedi_device *dev` to the
functions to reduce the use of the `info` variable a little bit.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Thu, 4 Apr 2013 13:59:07 +0000 (14:59 +0100)]
staging: comedi: rename dev parameter of device attribute functions
Most of the comedi core uses the identifier `dev` to point to a `struct
comedi_device`. The device sysfs attribute functions such as
`show_max_read_buffer_kb()` use the parameter id `dev` to point to a
`struct device`. Rename the parameter to `csdev` for "class device" for
consistency with the functions that call `device_create()` to create
these class devices (`comedi_alloc_board_minor()` and
`comedi_alloc_subdevice_minor()`).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Thu, 4 Apr 2013 13:59:06 +0000 (14:59 +0100)]
staging: comedi: remove hardware_device from struct comedi_device_info
The `hardware_device` member of `struct comedi_device_info` is only set
to point to a hardware device by the auto-configuration code (specifically
`comedi_alloc_board_minor() with a non-NULL `hardware_device` parameter)
so that it can be found again by the auto-unconfiguration code
(specifically `comedi_release_hardware_device()`). However, as
`info->device->hw_dev` (where `info` is a pointer to the `struct
comedi_device_info`) is set to the same value as `info->hardware_device`
(by calling `comedi_set_hw_dev()` with the same hardware device pointer)
we can look for that instead, so there is no need for the
`hardware_device` member any more. Get rid of it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Thu, 4 Apr 2013 13:59:05 +0000 (14:59 +0100)]
staging: comedi: remove comedi_clear_minor()
`comedi_clear_minor()` calls either `comedi_clear_board_minor()` or
`comedi_clear_subdevice_minor()` depending on its minor device number
parameter. The one it calls only depends on where it is called from, so
bypass the calls to `comedi_clear_minor()` and remove it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Thu, 4 Apr 2013 13:59:04 +0000 (14:59 +0100)]
staging: comedi: separate board and subdevice minor tables
The comedi core reserves minor device numbers from 0 to
`COMEDI_NUM_BOARD_MINORS - 1` (0 to 0x30 - 1) for the main comedi
"board" devices and reserves minor device numbers from
`COMEDI_NUM_BOARD_MINORS` to `COMEDI_NUM_MINORS - 1` (0x30 to 0x100 - 1)
for comedi subdevices (or at least those that claim to support
asynchronous comedi commands). There is an array
`comedi_file_info_table[COMEDI_NUM_MINORS]` used to hold pointers to
information for each board minor device number and subdevice minor
device number that has been allocated (with NULL pointers for those not
allocated), along with a protective lock `comedi_file_info_table_lock`.
Since the ranges of board minor device numbers and subdevice minor
device numbers do not overlap, we can use separate tables and separate
locks for the different types of minor device numbers. This will allow
us to use different pointer types for the elements of each table in the
future without just using a generic `void *`. (At the moment, the table
elements point to a `struct comedi_file_info` allocated dynamically for
each allocated board minor device or subdevice minor device, but I plan
to get rid of that data structure.)
Replace `comedi_file_info_table[COMEDI_NUM_MINORS]` with two new arrays
of the same type, `comedi_board_minor_table[COMEDI_NUM_BOARD_MINORS]`
for board minors, and
`comedi_subdevice_minor_table[COMEDI_NUM_SUBDEVICE_MINORS]` for
subdevice minors (where `COMEDI_NUM_SUBDEVICE_MINORS` is
`COMEDI_NUM_MINORS - COMEDI_NUM_BOARD_MINORS`).
`comedi_subdevice_minor_table[]` is indexed by the subdevice minor
number minus `COMEDI_NUM_BOARD_MINORS` since `COMEDI_NUM_BOARD_MINORS`
is the first valid subdevice minor number.
Replace `comedi_file_info_table_lock` with
`comedi_board_minor_table_lock` for board minors and
`comedi_subdevice_minor_table_lock` for subdevice minors.
Refactor `comedi_clear_minor()` to call one of two new functions
`comedi_clear_board_minor()` and `comedi_clear_subdevice_minor()`
depending on the minor device number passed as a parameter. Similarly,
refactor `comedi_file_info_from_minor()` to call one of two new
functions `comedi_file_info_from_board_minor()` and
`comedi_file_info_from_subdevice_minor()` depending on the minor device
number parameter.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Thu, 4 Apr 2013 13:59:03 +0000 (14:59 +0100)]
staging: comedi: remove COMEDI_FIRST_SUBDEVICE_MINOR
The macro `COMEDI_FIRST_SUBDEVICE_MINOR` just expands to another macro
`COMEDI_NUM_BOARD_MINORS`. Replace uses of
`COMEDI_FIRST_SUBDEVICE_MINOR` with `COMEDI_NUM_BOARD_MINORS` and get
rid of the former.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Thu, 4 Apr 2013 13:59:02 +0000 (14:59 +0100)]
staging: comedi: move COMEDI_NUM_MINORS and COMEDI_FIRST_SUBDEVICE_MINOR
The macro definitions `COMEDI_NUM_MINORS` and
`COMEDI_FIRST_SUBDEVICE_MINOR` are only used in "comedi_fops.c" so move
them to there from "comedidev.h".
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Thu, 4 Apr 2013 13:59:01 +0000 (14:59 +0100)]
staging: comedi: change comedi_file_info_table_lock to mutex
The spin-lock `comedi_file_info_table_lock` is used to protect against
simultaneous modification and access of `comedi_file_info_table[]`.
Change it from a spin-lock to a mutex as it is only used in contexts
where sleeping is allowed.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Thu, 4 Apr 2013 13:59:00 +0000 (14:59 +0100)]
staging: comedi: set hw_dev in comedi_alloc_board_minor()
Call `comedi_set_hw_dev()` to set the `hw_dev` member of `struct
comedi_device` in `comedi_alloc_board_minor()` instead of in
`comedi_auto_config()`. Don't bother to check for an error returned by
`comedi_set_hw_dev()` here; it only fails when changing a non-NULL
pointer to a different non-NULL pointer and since the `struct
comedi_device` has just been allocated and initialized, its `hw_dev`
will be NULL already. Calling `comedi_set_hw_dev()` with a non-NULL
hardware device pointer increments the kref counter for the hardware
device.
If `comedi_alloc_board_minor()` fails further down the function, we rely
on its call to `comedi_device_cleanup()` to call `comedi_clear_hw_dev()`
(via `comedi_device_detach()` and `cleanup_device()`) to clear `hw_dev`
and decrement its kref counter. (That's the "beneficial side-effect"
mentioned in the patch that replaced `__comedi_device_detach()`.)
Remove the call to `comedi_set_hw_dev()` from `comedi_auto_config()` as
the call to `comedi_alloc_board_minor()` does it for us.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Thu, 4 Apr 2013 13:58:59 +0000 (14:58 +0100)]
staging: comedi: move detach out of post-config
`comedi_device_postconfig()` calls `comedi_device_detach()` on failure.
Remove that call and make the callers of `comedi_device_postconfig()`
call `comedi_device_detach()` themselves if it returns an error. This
seems more logical as the callers of `comedi_device_postconfig()` called
`comedi_device_detach()` anyway if they didn't call
`comedi_device_postconfig()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Thu, 4 Apr 2013 13:58:58 +0000 (14:58 +0100)]
staging: comedi: replace __comedi_device_detach()
`comedi_device_detach()` does nothing if the `struct comedi_device`'s
`attached` member is false, otherwise it calls
`__comedi_device_detach()` to do the real work.
`__comedi_device_detach()` is called from various other functions in
"drivers.c" (`comedi_device_postconfig()`, `comedi_device_attach()`, and
`comedi_auto_config()`) to bypass the check for the `attached` member
being false.
If we make `__comedi_device_detach()` safe to call when the `attached`
member is already false, we can remove the check in
`comedi_device_detach()`, subsume `__comedi_device_detach()` within
`comedi_device_detach()`, and replace all the calls to
`__comedi_device_detach()` with calls to `comedi_device_detach()`.
In fact, it is already safe to call `__comedi_device_detach()` when the
`attached` member is false. We just need to remove the warning message
it outputs when the `driver` member is NULL. Then the function becomes
idempotent without outputting spurious warnings. (It is idempotent
because `dev->driver->detach()` will only be called once at most and the
call to `cleanup_device()` is idempotent itself.)
Combine `comedi_device_detach()` with `__comedi_device_detach()`,
removing the check for the `attached` member being false and removing
the warning about the `driver` member being NULL, and replace all calls
to `__comedi_device_detach()` with calls to the combined
`comedi_device_detach()`.
A beneficial side-effect of the above change is that a call to
`comedi_device_detach()` will always result in a call to
`cleanup_device()` and so always result in a call to
`comedi_clear_hw_dev()`. We will make use of this beneficial
side-effect in a later patch.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Thu, 4 Apr 2013 13:58:57 +0000 (14:58 +0100)]
staging: comedi: put module _after_ detach
On failure of the call to the low-level comedi device driver's
`->attach()` handler from `__comedi_device_attach()`, reverse the
current ordering of the calls to `module_put()` and
`comedi_device_detach()` because `__comedi_device_detach()` will call
code in the module being put.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Thu, 4 Apr 2013 13:58:56 +0000 (14:58 +0100)]
staging: comedi: simplify driver module counting
For a legacy device attachment with the `COMEDI_DEVCONFIG` ioctl,
`do_devconfig_ioctl()` calls `comedi_device_attach()` to find a matching
device driver and attach the device. It then tries to increment the
device driver's module count and if that fails it detaches the device.
So on successful attachment of a device by the `COMEDI_DEVCONFIG` ioctl,
the device driver's module count will have been incremented.
`comedi_device_attach()` is called from nowhere else. It already
increments the device driver's module count temporarily and decrements
it again; if it gets as far as calling `comedi_device_postconfig()` the
module count is decremented within that function.
Simplify the above by removing the decrement of the device driver module
count from `comedi_device_postconfig()`. If the call to
`comedi_device_postconfig()` succeeds, `comedi_device_attach()` will
return with the module count still incremented, otherwise decrement the
module count before returning the error. Don't try and increment the
module count in `do_devconfig_ioctl()` after a successful return from
`comedi_device_attach()` as the module count has now already been
incremented.
`comedi_device_postconfig()` is also called by `comedi_auto_config()`
which currently has to increment the device driver's module count
temporarily so that `comedi_device_postconfig()` can decrement it, but
always returns with no overall change to the module count. Remove all
the module count manipulations from `comedi_device_postconfig()`. There
is no other reason for `comedi_auto_config()` to increment the device
driver's module count temporarily, since it is only called (indirectly)
from the device driver itself (usually via one of the wrappers
`comedi_pci_auto_config()` or `comedi_usb_auto_config()`).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Thu, 4 Apr 2013 13:58:55 +0000 (14:58 +0100)]
staging: comedi: avoid forward declarations
Move a few functions and variables to avoid a couple of forward
declarations.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Thu, 4 Apr 2013 13:58:54 +0000 (14:58 +0100)]
staging: comedi: remove manually unconfigured dynamic devices
If a dynamically allocated (non-legacy, and automatically configured)
comedi device has been successfully unconfigured by use of the
`COMEDI_DEVCONFIG` ioctl, then remove the device afterwards.
(Dynamically identified comedi devices are identified by their minor
device number being `comedi_num_legacy_minors` or greater.) This is
done in `comedi_unlocked_ioctl()` on return from `do_devconfig_ioctl()`.
Note that there is an unlikely race condition with some other thread
that has just called `comedi_file_info_from_minor()` or
`comedi_dev_from_minor()` and is about to use the device, but that race
condition also exists for automatically removed devices and will be
dealt with properly once reference counting of comedi devices has been
implemented. We do avoid a race condition between automatic removal and
removal by the `COMEDI_DEVCONFIG` ioctl though.
Also add an extra precaution in `do_devconfig_ioctl()` to avoid
configuring a dynamically allocated device since there is a tight
window avoiding the race condition where this could happen and the
device is about to be removed anyway.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Thu, 4 Apr 2013 13:58:53 +0000 (14:58 +0100)]
staging: comedi: no need to evade comedi_auto_unconfig()
When `comedi_unlocked_ioctl()` handled the `COMEDI_DEVCONFIG` ioctl via
a call to `do_devconfig()`, this used to be allowed to attach a legacy
hardware device to any board minor device, and the auto-unconfiguration
code for non-legacy used to search all board minor devices to find the
hardware device being removed. After calling `do_devconfig()`
successfully, `comedi_unlocked_ioctl()` sets the `hardware_device`
member of the `struct comedi_file_info` to NULL to stop the
auto-unconfiguration code finding it by accident and unconfiguring the
wrong comedi device as a result.
The above is no longer necessary because `do_devconfig()` now only
allows legacy hardware devices to be attached to comedi board minor
device numbers below `comedi_num_legacy_minors` and the
auto-unconfiguration code (particularly
`comedi_release_hardware_device()`) only searches comedi board minor
device numbers greater than or equal to `comedi_num_legacy_minors`, so
there is no overlap.
Remove the now unnecessary setting of `info->hardware_device = NULL` in
`comedi_unlocked_ioctl()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Thu, 4 Apr 2013 13:58:52 +0000 (14:58 +0100)]
staging: comedi: avoid releasing legacy minors automatically
`comedi_alloc_board_minor()` is called for both reserved "legacy"
devices created during module initialization, and for dynamically
created devices (via `comedi_auto_config()`). All the minor device
numbers from 0 to `comedi_num_legacy_minors - 1` are for legacy devices
and all those from `comedi_num_legacy_minors` to
`COMEDI_NUM_BOARD_MINORS - 1` are for dynamically created devices.
`comedi_release_hardware_device()` is called (via
`comedi_auto_unconfig()`) when a dynamically created device is being
removed. It needs to search the table of minor device numbers to see
which one is associated with the hardware device. It currently starts
the search at minor device number 0. Change it to start from
`comedi_num_legacy_minors` to skip over those belonging to legacy
devices. Also change `comedi_alloc_board_minor()` to skip the legacy
devices when searching for a free minor device number for the
dynamically created device. (The validity of the `hardware_device`
parameter is used to distinguish the legacy devices from the dynamically
created ones.)
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Thu, 4 Apr 2013 13:58:51 +0000 (14:58 +0100)]
staging: comedi: pre-lock mutex on creation of comedi device
Return from `comedi_alloc_board_minor()` with the mutex of the created
`struct comedi_device` pre-locked. This allows further initialization
by the caller without the worry of something getting in there first.
`comedi_auto_config()` no longer needs to check if the device is already
"attached" since whatever was trying to attach the device would need to
have locked the mutex first.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Thu, 4 Apr 2013 13:58:50 +0000 (14:58 +0100)]
staging: comedi: change comedi_alloc_board_minor() to return pointer
Change `comedi_alloc_board_minor()` to return a pointer to the allocated
`struct comedi_device` instead of a minor device number. Return an
`ERR_PTR()` value on error instead of a negative error number. This
saves a call to `comedi_dev_from_minor()` in `comedi_auto_config()`.
Also change it to use a local variable `dev` to hold the pointer to the
`struct comedi_device` instead of using `info->device` all the time.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Thu, 4 Apr 2013 13:58:49 +0000 (14:58 +0100)]
staging: comedi: make comedi_free_board_minor() static
`comedi_free_board_minor()` is now only called from the same .c file it
is defined in, so give it static linkage.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Thu, 4 Apr 2013 13:58:48 +0000 (14:58 +0100)]
staging: comedi: call comedi_release_hardware_device() on error
If `comedi_auto_config()` fails after allocating the minor device, call
`comedi_release_hardware_device()` instead of
`comedi_free_board_minor()` to free the minor device. That's the same
call that `comedi_auto_unconfig()` uses, and is slightly safer as it
checks the minor device number is still tied to the same hardware
device.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Thu, 4 Apr 2013 13:58:47 +0000 (14:58 +0100)]
staging: comedi: add comedi_release_hardware_device()
Add `comedi_release_hardware_device()` as a replacement for the call
sequence `comedi_find_board_minor()`, `comedi_free_board_minor()`. This
is slightly safer as we can make sure nothing funny happens to the found
`comedi_file_info_table[]` entry in the middle of the sequence. Change
`comedi_auto_unconfig()` to call the new function instead of the old
sequence. Remove `comedi_find_board_minor()` as it has no other
callers.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Thu, 4 Apr 2013 13:58:46 +0000 (14:58 +0100)]
staging: comedi: refactor comedi_free_board_minor()
Split out the part of `comedi_free_board_minor()` that clears the
`comedi_file_info_table[]` element into new function
`comedi_clear_minor()`. Split out the remainder of the original
function into new function `comedi_free_board_file_info()`.
Also re-use a call to `comedi_clear_minor()` in
`comedi_free_subdevice_minor()` instead of doing the same thing inline.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Thu, 4 Apr 2013 13:58:45 +0000 (14:58 +0100)]
staging: comedi: adjust module count on device cleanup
`comedi_device_cleanup()` is called just before freeing a comedi device.
It is possible for the device to still be open in which case the module
reference counts for the core comedi module and possibly the low-level
driver module will remain out of whack because `comedi_close()` will not
find the comedi device and so will not decrement the module counts.
This really needs to be handled better, but for now decrement the module
counts in `comedi_device_cleanup()` according to the number of
outstanding opens.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Thu, 4 Apr 2013 13:58:44 +0000 (14:58 +0100)]
staging: comedi: remove memset() call from comedi_device_init()
`comedi_device_init()` is only called from one place
(`comedi_alloc_board_minor()`) and the `struct comedi_device` has
already been zeroed out by `kzalloc()`. Don't bother zeroing it out
again with `memset()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Thu, 4 Apr 2013 13:58:43 +0000 (14:58 +0100)]
staging: comedi: no need to zero out comedi_file_info_table[]
In the comedi core module, `comedi_file_info_table[]` is tentatively
defined in the .bss section, so will already be zeroed out on
initialization. Don't bother zeroing it out again in the module
initialization function `comedi_init()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Thu, 4 Apr 2013 13:58:42 +0000 (14:58 +0100)]
staging: comedi: check comedi_auto_config() params
Do some minimal error checking of the parameters of
`comedi_auto_config()`. Just make sure the `hardware_device` and
`driver` parameters are non-NULL.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexey Khoroshilov [Fri, 5 Apr 2013 21:14:23 +0000 (01:14 +0400)]
staging: dgrp: implement error handling in dgrp_create_class_sysfs_files()
There is no any error handling in dgrp_create_class_sysfs_files().
The patch adds code to check return values and propagate them to dgrp_init_module().
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kurt Kanzenbach [Thu, 4 Apr 2013 14:03:16 +0000 (16:03 +0200)]
staging: usbip: userspace: show product name in `list -l' command
The `usbip list -l' command shows your local usb-devices.
Example:
$ usbip list -l
$ Local USB devices
$ =================
$ - busid 1-1 (13fe:1d00)
$ 1-1:1.0 -> usb-storage
$
$ - busid 1-2 (0409:55aa)
$ 1-2:1.0 -> hub
However this list command doesn't show which device is connected
to this busid. Therefore you have to use another tool e.g. lsusb
to determine that.
This patches adds the possibility to see which device that is.
Example:
$ usbip list -l
$ Local USB devices
$ =================
$ - busid 1-1 (13fe:1d00)
$ Kingston Technology Company Inc. : DataTraveler 2.0 1GB/4GB Flash Drive / Patriot Xporter 4GB Flash
$ 1-1:1.0 -> usb-storage
$
$ - busid 1-2 (0409:55aa)
$ NEC Corp. : Hub (0409:55aa)
$ 1-2:1.0 -> hub
If parsable is specified the info will be not printed.
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kurt Kanzenbach [Thu, 4 Apr 2013 14:03:15 +0000 (16:03 +0200)]
staging: usbip: userspace: unified command line arguments
The command `usbip attach' uses --host for specifing
the remote host, while `usbip list' uses --remote.
This is confusing and this patch adapts this.
In Addition changed the manpage and README accordingly.
Before:
$ usbip attach --host <host> -b <busid>
$ usbip list --remote <host>
Now:
$ usbip attach --remote <host> -b <busid>
$ usbip list --remote <host>
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kurt Kanzenbach [Thu, 4 Apr 2013 14:03:14 +0000 (16:03 +0200)]
staging: usbip: userspace: libsrc: cleanup parsing
Since the names.c/names.h are taken from another project, some
functions which names.c provides aren't used by usbipd.
This patch fixes:
- removed useless comments
- unified debug/error messages by using the macros
provided by usbip_common.h
- removed unnused code
The code cleanup includes:
- remove unused data structures
- remove code to create them
- remove code to access them
The file names.c is used to parse the `usb.ids' file. The parser
stores a lot of information about usb devices that is never used.
The `usb.ids' file has several sections. Some variables (like
`lasthut') store the ID of the current section, and those variables
are used to decide which section is currently being parsed (i.e. in
which data structure the current line will be stored).
We removed the code to read those IDs because they are never used
anyway. We replaced them by the pseudo-ID `1' (instead of reading the
ID from the file) to indicate that the parser is in a section that
can be ignored. If the parser is in such a section, the current line
(which contains sub-items for this section) is discarded.
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kurt Kanzenbach [Thu, 4 Apr 2013 14:03:13 +0000 (16:03 +0200)]
staging: usbip: userspace: removed unnecessary code
Since no usbip_name function is used in usbipd, it's not
necessary to parse "usb.ids" file at startup.
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Reif [Thu, 4 Apr 2013 14:03:12 +0000 (16:03 +0200)]
staging: usbip: userspace: avoid memory leaks
Call freeaddrinfo when connect/listen fails.
Call usbip_host_driver_close on error.
Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kurt Kanzenbach [Thu, 4 Apr 2013 14:03:11 +0000 (16:03 +0200)]
staging: usbip: simplified cleanup function
This patch simplified "stub_device_free" cleanup function:
- changed return type to void, since the return value is
not checked anywhere
- kfree is NULL-safe, so removed if statement
- deleted debug-message
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kurt Kanzenbach [Thu, 4 Apr 2013 14:03:10 +0000 (16:03 +0200)]
staging: usbip: removed unnecessary for loop
This for loop is not needed, since STUB_BUSID_OTHER is defined as 0.
In Addition added a comment if STUB_BUSID_OTHER changes sometime.
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kurt Kanzenbach [Thu, 4 Apr 2013 14:03:09 +0000 (16:03 +0200)]
staging: usbip: removed unnecessary if-else-statements
In each if-else case "return" is called. This is why
these if-else-statements are useless. Removing them
improves understanding and readability.
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kurt Kanzenbach [Thu, 4 Apr 2013 14:03:08 +0000 (16:03 +0200)]
staging: usbip: simplified errorhandling
In each errorcase spin_unlock_irq is called and -EINVAL is returned.
To simplify that I created a label called "err" doing that.
On Success count will be returned.
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Reif [Thu, 4 Apr 2013 14:03:07 +0000 (16:03 +0200)]
staging: usbip: simple indent fix
Fix an indent.
Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Reif [Thu, 4 Apr 2013 14:03:06 +0000 (16:03 +0200)]
staging: usbip: remove unnused, broken macro
Remove broken preprocessor macro "hardware". It is unused and it
references an element (pdev in vhci_hcd) that does not exist.
Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kurt Kanzenbach [Thu, 4 Apr 2013 14:03:05 +0000 (16:03 +0200)]
staging: usbip: removed enumeration of comments
Enumerations for one comment makes no sense.
This is why this should be removed.
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Reif [Thu, 4 Apr 2013 14:03:04 +0000 (16:03 +0200)]
staging: usbip: reformat function pickup_urb_and_free_priv
re-indent funtion "pickup_urb_and_free_priv" to improve readability.
Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kurt Kanzenbach [Thu, 4 Apr 2013 14:03:03 +0000 (16:03 +0200)]
staging: usbip: reformat function stub_recv_cmd_unlink()
Reformat function stub_recv_cmd_unlink() to improve readability.
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Reif [Thu, 4 Apr 2013 14:03:02 +0000 (16:03 +0200)]
staging: usbip: userspace: libsrc: replace numbers by ascii
replace numbers in code by ascii text constants as suggested
by Dan Carpenter:
http://driverdev.linuxdriverproject.org/pipermail/devel/2013-February/035907.html
Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Thu, 4 Apr 2013 06:29:42 +0000 (09:29 +0300)]
staging: slicoss: information leak in ETHTOOL_GSET
There are some fields in "edata" which have not been cleared. One
example is edata.cmd. It leaks uninitialized stack information to the
user.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Thu, 4 Apr 2013 06:31:24 +0000 (09:31 +0300)]
staging: csr: info leak in unifi_cfg_get_info()
"cfg_ap_config" has a number of fields which are not cleared before we
copy them to the user. I've added a memset() at the beginning to set
everything to zero.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 3 Apr 2013 20:40:13 +0000 (13:40 -0700)]
staging: comedi: range: introduce some simple mA ranges
The simple mA ranges 0 to 20, 4 to 20, and 0 to 32 are fairly common.
Introduce them in the comedi core and use them in the drivers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This page took 0.047969 seconds and 5 git commands to generate.