Michał Mirosław [Thu, 7 Apr 2011 03:35:07 +0000 (03:35 +0000)]
net: tg3: convert to hw_features
Cleanup hint: Some features are calculated in tg3_get_invariants() and
the rest in its caller --- tg3_init_one(). This is not changed here.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michał Mirosław [Thu, 7 Apr 2011 02:43:48 +0000 (02:43 +0000)]
net: enic: convert to hw_features
As the driver uses GRO and not LRO, LRO settings are ignored anyway
and are removed here to avoid confusion.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michał Mirosław [Thu, 7 Apr 2011 02:43:48 +0000 (02:43 +0000)]
net: benet: convert to hw_features
Simple conversion.
This also fixes a bug in TX checksum toggling --- driver was changing
NETIF_F_HW_CSUM instead of NETIF_F_IP_CSUM+NETIF_F_IPV6_CSUM.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michał Mirosław [Thu, 31 Mar 2011 01:01:35 +0000 (01:01 +0000)]
skge: convert to hw_features
just IP_CSUM. This needs testing and so is not changed here.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ajit Khaparde [Wed, 6 Apr 2011 18:08:43 +0000 (18:08 +0000)]
be2net: call FLR after setup wol in be_shutdown
Calling setup_wol after a reset is inconsequential.
The WOL setting should be programmed before FLR.
And yes, FLR does not erase wol information.
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ajit Khaparde [Wed, 6 Apr 2011 18:08:30 +0000 (18:08 +0000)]
be2net: dynamically allocate adapter->vf_cfg
Instead of a fixed sized array for vf_cfg, allocate the size dynamically
depending on number of VFs the device supports.
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ajit Khaparde [Wed, 6 Apr 2011 18:08:17 +0000 (18:08 +0000)]
be2net: fix to get max VFs supported from adapter
The user supplied num_vfs value need not be compared
against a static BE_MAX_VF, but can be checked against
the actual VFs that the device can support.
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ajit Khaparde [Wed, 6 Apr 2011 18:08:01 +0000 (18:08 +0000)]
be2net: use common method to check for sriov function type
Lancer and BE can both use SLI_INTF_REG to check a VF or a PF.
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ajit Khaparde [Wed, 6 Apr 2011 18:07:43 +0000 (18:07 +0000)]
be2net: add rxhash support
Add rxhash support,
Based on initial work by Eric Dumazet.
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 7 Apr 2011 21:05:23 +0000 (14:05 -0700)]
Merge branch 'master' of /linux/kernel/git/davem/net-2.6
Conflicts:
drivers/net/benet/be_main.c
OGAWA Hirofumi [Thu, 7 Apr 2011 21:04:08 +0000 (14:04 -0700)]
ipv4: Fix "Set rt->rt_iif more sanely on output routes."
Commit
1018b5c01636c7c6bda31a719bda34fc631db29a ("Set rt->rt_iif more
sanely on output routes.") breaks rt_is_{output,input}_route.
This became the cause to return "IP_PKTINFO's ->ipi_ifindex == 0".
To fix it, this does:
1) Add "int rt_route_iif;" to struct rtable
2) For input routes, always set rt_route_iif to same value as rt_iif
3) For output routes, always set rt_route_iif to zero. Set rt_iif
as it is done currently.
4) Change rt_is_{output,input}_route() to test rt_route_iif
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Yongjun [Wed, 6 Apr 2011 18:40:12 +0000 (18:40 +0000)]
net: fix skb_add_data_nocache() to calc csum correctly
commit
c6e1a0d12ca7b4f22c58e55a16beacfb7d3d8462 broken the calc
(net: Allow no-cache copy from user on transmit)
of checksum, which may cause some tcp packets be dropped because
incorrect checksum. ssh does not work under today's net-next-2.6
tree.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Acked-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Wed, 6 Apr 2011 11:58:36 +0000 (11:58 +0000)]
ewrk3: convert to set_phys_id
Use ethtool infrastructure for blinking, which is now does
locking at higher level.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Wed, 6 Apr 2011 11:47:23 +0000 (11:47 +0000)]
qlcnic: convert to set_phys_id
Convert driver to use new ethtool set_phys_id.
Not completely sure that this is correct for all cases of device
up/down and doing operation. Compile tested only.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michał Mirosław [Tue, 5 Apr 2011 01:36:58 +0000 (01:36 +0000)]
net: netxen: convert to hw_features
Rather simple conversion to hw_features.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jan Kiszka [Wed, 6 Apr 2011 10:58:37 +0000 (10:58 +0000)]
capi: Perform scheduled capifs removal
udev fully replaces this special file system that only contains CAPI
NCCI TTY device nodes. User space (pppdcapiplugin) works without
noticing the difference.
Signed-off-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ian Campbell [Sun, 3 Apr 2011 22:26:24 +0000 (22:26 +0000)]
Signed bit field; int have_hotplug_status_watch:1
Fixes error from sparse:
CHECK drivers/net/xen-netback/xenbus.c
drivers/net/xen-netback/xenbus.c:29:40: error: dubious one-bit signed bitfield
int have_hotplug_status_watch:1;
Reported-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ian Campbell [Sun, 3 Apr 2011 23:12:23 +0000 (23:12 +0000)]
MAINTAINERS: add entry for Xen network backend
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Padmanabh Ratnakar [Sun, 3 Apr 2011 01:54:39 +0000 (01:54 +0000)]
be2net: Fix suspend/resume operation
eq_next_idx is not getting reset to zero during suspend.
This causes resume to fail. Added the fix.
Signed-off-by: Sarveswara Rao Mygapula <sarveswararao.mygapula@emulex.com>
Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Padmanabh Ratnakar [Sun, 3 Apr 2011 01:54:11 +0000 (01:54 +0000)]
be2net: Rename some struct members for clarity
Renamed msix_vec_idx to eq_idx in be_eq_obj struct.
Renamed msix_vec_next_idx to eq_next_idx in be_adapter structure.
These members are used in INTX mode also.
Signed-off-by: Sarveswara Rao Mygapula <sarveswararao.mygapula@emulex.com>
Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Mon, 4 Apr 2011 15:09:25 +0000 (15:09 +0000)]
s2io: convert to set_phys_id (v2)
Convert to new ethtool set physical id model. Remove no longer used
timer, and fix docbook comment.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Mon, 4 Apr 2011 12:31:19 +0000 (12:31 +0000)]
niu: convert to new ethtool set_phys_id
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Mon, 4 Apr 2011 11:06:41 +0000 (11:06 +0000)]
pcnet32: convert to set_phys_id
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Mon, 4 Apr 2011 11:06:40 +0000 (11:06 +0000)]
benet: convert to set_phys_id
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Mon, 4 Apr 2011 11:06:37 +0000 (11:06 +0000)]
bnx2x: convert to set_phys_id
Also cleanup error codes to no lie about things that driver doesn't
support. If device is down report -EAGAIN (same as Broadcom), and
if port doesn't blink then error as well.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Mon, 4 Apr 2011 11:06:36 +0000 (11:06 +0000)]
bnx2: convert to set_phys_id
In this case, need to add element to device private to hold
original led state.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Mon, 4 Apr 2011 11:06:35 +0000 (11:06 +0000)]
vxge: convert to set_phys_id
Also fix up incorrect docbook comment
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Mon, 4 Apr 2011 08:43:51 +0000 (08:43 +0000)]
cxgb3: implement set_phys_id
Implement new ethtool set_phys_id on Chelsio cxgb3 board.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Mon, 4 Apr 2011 08:43:50 +0000 (08:43 +0000)]
tg3: implement ethtool set_phys_id
Implement control of LED via set_phys_id.
Note: since PHY is powered off if device is down, this board
only allows blinking if device is up.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Mon, 4 Apr 2011 08:43:42 +0000 (08:43 +0000)]
skge: implement set_phys_id
Implement set_phys_id led control on SysKonnect board.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Mon, 4 Apr 2011 08:43:41 +0000 (08:43 +0000)]
sky2: support ethtool set_phys_id
Use ethtool set_phys_id to control LED. Fixes issues with RTNL being
held for extended periods.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ulrich Weber [Wed, 6 Apr 2011 21:04:49 +0000 (14:04 -0700)]
pppoe: drop PPPOX_ZOMBIEs in pppoe_flush_dev
otherwise we loop forever if a PPPoE socket was set
to PPPOX_ZOMBIE state by a PADT message when the
ethernet device is going down afterwards.
Signed-off-by: Ulrich Weber <uweber@astaro.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 6 Apr 2011 20:34:15 +0000 (13:34 -0700)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-2.6
Peter Korsgaard [Tue, 5 Apr 2011 03:03:56 +0000 (03:03 +0000)]
dsa/mv88e6131: add support for mv88e6085 switch
The mv88e6085 is identical to the mv88e6095, except that all ports are
10/100 Mb/s, so use the existing setup code except for the cpu/dsa speed
selection in _setup_port().
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Neil Horman [Wed, 6 Apr 2011 20:07:09 +0000 (13:07 -0700)]
ipv6: Enable RFS sk_rxhash tracking for ipv6 sockets (v2)
properly record sk_rxhash in ipv6 sockets (v2)
Noticed while working on another project that flows to sockets which I had open
on a test systems weren't getting steered properly when I had RFS enabled.
Looking more closely I found that:
1) The affected sockets were all ipv6
2) They weren't getting steered because sk->sk_rxhash was never set from the
incomming skbs on that socket.
This was occuring because there are several points in the IPv4 tcp and udp code
which save the rxhash value when a new connection is established. Those calls
to sock_rps_save_rxhash were never added to the corresponding ipv6 code paths.
This patch adds those calls. Tested by myself to properly enable RFS
functionalty on ipv6.
Change notes:
v2:
Filtered UDP to only arm RFS on bound sockets (Eric Dumazet)
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Anirban Chakraborty [Fri, 1 Apr 2011 14:28:36 +0000 (14:28 +0000)]
qlcnic: Update version number to 5.0.16
Bumped up version number to 5.0.16
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rajesh Borundia [Fri, 1 Apr 2011 14:28:31 +0000 (14:28 +0000)]
qlcnic: Fix LRO disable
o In dev->open LRO was enabled by default, enable it depending
upon netdev->features , kernel may have disabled it.
o Configure LRO when interface is up.
Signed-off-by: Rajesh Borundia <Rajesh.Borundia@qlogic.com>
Signed-off-by: Anirban Chakraborty <Anirban.Chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sritej Velaga [Fri, 1 Apr 2011 14:28:26 +0000 (14:28 +0000)]
qlcnic: Use flt method to determine flash fw region
Use flash layout table to get flash fw starting address and its size.
If that fails, use legacy method.
Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com>
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Anirban Chakraborty [Fri, 1 Apr 2011 14:28:21 +0000 (14:28 +0000)]
qlcnic: Remove unused code
Cleaned up unused codes for interrupt coalescence settings
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Anirban Chakraborty [Fri, 1 Apr 2011 14:28:15 +0000 (14:28 +0000)]
qlcnic: Changes to VLAN code
Made changes to VLAN code comply with new VLAN infrastructure in kernel
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Anirban Chakraborty [Fri, 1 Apr 2011 14:28:11 +0000 (14:28 +0000)]
qlcnic: Code optimization patch
Optimized code resulted in achieving lower CPU utilization on transmit path
and higher throughput for small packet sizes (64 bytes).
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Anirban Chakraborty [Fri, 1 Apr 2011 14:28:05 +0000 (14:28 +0000)]
qlcnic: Cleanup patch
1. Changed adapter structure to move away from embedding hardware and
receive context structs and use pointers to those objects
2. Packed all the structs that interface with FW
3. Removed unused code and structs
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sony Chacko [Fri, 1 Apr 2011 14:27:59 +0000 (14:27 +0000)]
qlcnic: Memory leak fix
Fix a memory leak in error path of pci info.
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sony Chacko [Fri, 1 Apr 2011 14:27:47 +0000 (14:27 +0000)]
qlcnic: Make PCI info available in all modes
Before this fix, PCI info was available only when multiple NIC functions
are present on the same port.
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ajit Khaparde [Wed, 6 Apr 2011 05:53:13 +0000 (05:53 +0000)]
be2net: Fix a potential crash during shutdown.
adapter could remain uninitialized if probe fails for some reason.
A null pointer access could cause a crash if be_shutdown
is called after that.
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rasesh Mody [Mon, 4 Apr 2011 08:29:59 +0000 (08:29 +0000)]
bna: Fix for handling firmware heartbeat failure
This patch contains a fix for gracefully handling firmware heartbeat
failure instead of forcing panic.
Signed-off-by: Debashis Dutt <ddutt@brocade.com>
Signed-off-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Oliver Hartkopp [Tue, 5 Apr 2011 08:01:16 +0000 (08:01 +0000)]
can: convert protocol handling to RCU
This patch removes spin_locks at CAN socket creation time by using RCU.
Inspired by the discussion with Kurt van Dijck and Eric Dumazet the RCU code
was partly derived from af_phonet.c
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 6 Apr 2011 19:27:34 +0000 (12:27 -0700)]
Merge branch 'for-davem' of git://git./linux/kernel/git/bwh/sfc-next-2.6
Enric Balletbo i Serra [Tue, 5 Apr 2011 07:08:41 +0000 (07:08 +0000)]
can: mcp251x: Allow pass IRQ flags through platform data.
When an interrupt occurs, the INT pin is driven low by the
MCP251x controller (falling edge) but in some cases the INT
pin can be connected to the MPU through a transistor or level
translator which inverts this signal. In this case interrupt
should be configured in rising edge.
This patch adds support to pass the IRQ flags via
mcp251x_platform_data.
Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Enric Balletbo i Serra [Tue, 5 Apr 2011 06:52:49 +0000 (06:52 +0000)]
smsc911x: fix mac_lock acquision before calling smsc911x_mac_read
When SMSC911X_SAVE_MAC_ADDRESS flag is enabled the driver calls
smsc911x_mac_read and smsc911x_mac_read function without acquiring mac_lock
spinlock
This patch fixes following warning
smsc911x: Driver version 2008-10-21.
------------[ cut here ]------------
WARNING: at drivers/net/smsc911x.c:261 smsc911x_mac_read+0x24/0x220()
Modules linked in:
[<
c0060858>] (unwind_backtrace+0x0/0xe0) from [<
c009322c>] (warn_slowpath_common+0x4c/0x64)
[<
c009322c>] (warn_slowpath_common+0x4c/0x64) from [<
c009325c>] (warn_slowpath_null+0x18/0x1c)
[<
c009325c>] (warn_slowpath_null+0x18/0x1c) from [<
c0324bec>] (smsc911x_mac_read+0x24/0x220)
[<
c0324bec>] (smsc911x_mac_read+0x24/0x220) from [<
c0434788>] (smsc911x_read_mac_address+0x18/0x6c)
[<
c0434788>] (smsc911x_read_mac_address+0x18/0x6c) from [<
c0434c74>] (smsc911x_drv_probe+0x498/0x1788)
[<
c0434c74>] (smsc911x_drv_probe+0x498/0x1788) from [<
c02d3e54>] (platform_drv_probe+0x14/0x18)
[<
c02d3e54>] (platform_drv_probe+0x14/0x18) from [<
c02d2d60>] (driver_probe_device+0xc8/0x184)
[<
c02d2d60>] (driver_probe_device+0xc8/0x184) from [<
c02d2e84>] (__driver_attach+0x68/0x8c)
[<
c02d2e84>] (__driver_attach+0x68/0x8c) from [<
c02d1fc8>] (bus_for_each_dev+0x48/0x74)
[<
c02d1fc8>] (bus_for_each_dev+0x48/0x74) from [<
c02d2660>] (bus_add_driver+0x9c/0x228)
[<
c02d2660>] (bus_add_driver+0x9c/0x228) from [<
c02d3598>] (driver_register+0xa0/0x124)
[<
c02d3598>] (driver_register+0xa0/0x124) from [<
c0050668>] (do_one_initcall+0x94/0x168)
[<
c0050668>] (do_one_initcall+0x94/0x168) from [<
c0008984>] (kernel_init+0xa0/0x154)
[<
c0008984>] (kernel_init+0xa0/0x154) from [<
c005afac>] (kernel_thread_exit+0x0/0x8)
---[ end trace
2c931a35b7885770 ]---
Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matt Carlson [Tue, 5 Apr 2011 14:22:51 +0000 (14:22 +0000)]
tg3: Support 4mb flash sizes for 5717 and 5719
If a 5717 or 5719 NVRAM part is manually strapped and is 2mb in size,
the driver needs to look at the NVRAM size field rather than infer it
from the strapping itself.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matt Carlson [Tue, 5 Apr 2011 14:22:50 +0000 (14:22 +0000)]
tg3: Enable 5720 support
This patch adds the 5720 device ID to the PCI table, thus enabling 5720
support.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matt Carlson [Tue, 5 Apr 2011 14:22:49 +0000 (14:22 +0000)]
tg3: Add 5720 PHY ID
This patch adds the 5720 PHY ID.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matt Carlson [Tue, 5 Apr 2011 14:22:48 +0000 (14:22 +0000)]
tg3: Add 5720 H2BMC support
This patch adds support for the new Host to BMC feature.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matt Carlson [Tue, 5 Apr 2011 14:22:47 +0000 (14:22 +0000)]
tg3: Add 5720 NVRAM decoding
The 5720 implements its own NVRAM pin strapping scheme. This patch adds
the required support.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matt Carlson [Tue, 5 Apr 2011 14:22:46 +0000 (14:22 +0000)]
tg3: Add 5720 ASIC rev
This patch adds support for the 5720 ASIC rev.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matt Carlson [Tue, 5 Apr 2011 14:22:45 +0000 (14:22 +0000)]
tg3: Reintroduce 5717_PLUS
This patch reintroduces the TG3_FLG3_5717_PLUS to identify 5717 and
later devices.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matt Carlson [Tue, 5 Apr 2011 14:22:44 +0000 (14:22 +0000)]
tg3: 5717_PLUS => 57765_PLUS
The 57765 arrived before the 5717 and has a subset of the features
supported by the 5717. This patch renames the 5717_PLUS flag so that it
can be reintroduced to designate only 5717 and later devices.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matt Carlson [Tue, 5 Apr 2011 14:22:43 +0000 (14:22 +0000)]
tg3: Cleanup extended rx ring size code
Hardcoded values are used in multiple places to describe the maximum rx
ring sizes. This patch replaces those values with preprocessor
constants. This patch also introduces a new TG3_FLG3_LRG_PROD_RING_CAP
to determine if the device is capable of supporting larger ring sizes.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 5 Apr 2011 21:21:11 +0000 (14:21 -0700)]
Merge branch 'master' of git://git./linux/kernel/git/kaber/nf-2.6
Ben Hutchings [Fri, 1 Apr 2011 23:43:46 +0000 (00:43 +0100)]
sfc: Implement ethtool_ops::set_phys_id instead of ethtool_ops::phys_id
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Ben Hutchings [Fri, 1 Apr 2011 23:35:15 +0000 (00:35 +0100)]
ethtool: Change ETHTOOL_PHYS_ID implementation to allow dropping RTNL
The ethtool ETHTOOL_PHYS_ID command runs for an arbitrarily long
period of time, holding the RTNL lock. This blocks routing updates,
device enumeration, and various important operations that one might
want to keep running while hunting for the flashing LED.
We need to drop the RTNL lock during this operation, but currently the
core implementation is a thin wrapper around a driver operation and
drivers may well depend upon holding the lock.
Define a new driver operation 'set_phys_id' with an argument that sets
the ID indicator on/off/inactive/active (the last optional, for any
driver or firmware that prefers to handle blinking asynchronously).
When this is defined, the ethtool core drops the lock while waiting
and only acquires it around calls to this operation.
Deprecate the 'phys_id' operation in favour of this. It can be
removed once all in-tree drivers are converted.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Ben Hutchings [Fri, 1 Apr 2011 22:57:41 +0000 (23:57 +0100)]
ethtool: Fill out and update comment for struct ethtool_ops
Briefly document all operations (except get_rx_ntuple), including
whether they may return an error code and whether they are deprecated.
Also mention some things that should be handled by the ethtool core
rather than by drivers.
Briefly document general requirements for callers.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Ben Hutchings [Fri, 1 Apr 2011 21:52:34 +0000 (22:52 +0100)]
ethtool: Convert struct ethtool_ops comment to kernel-doc format
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Ben Hutchings [Tue, 5 Apr 2011 14:00:02 +0000 (15:00 +0100)]
sfc: Implement generic features interface
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Ben Hutchings [Tue, 5 Apr 2011 12:36:09 +0000 (13:36 +0100)]
sfc: Enable all TSO features on VLANs
The TSO code already supports IPv6 on VLAN, so enable it.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Tom Herbert [Tue, 5 Apr 2011 05:30:30 +0000 (22:30 -0700)]
net: Allow no-cache copy from user on transmit
This patch uses __copy_from_user_nocache on transmit to bypass data
cache for a performance improvement. skb_add_data_nocache and
skb_copy_to_page_nocache can be called by sendmsg functions to use
this feature, initial support is in tcp_sendmsg. This functionality is
configurable per device using ethtool.
Presumably, this feature would only be useful when the driver does
not touch the data. The feature is turned on by default if a device
indicates that it does some form of checksum offload; it is off by
default for devices that do no checksum offload or indicate no checksum
is necessary. For the former case copy-checksum is probably done
anyway, in the latter case the device is likely loopback in which case
the no cache copy is probably not beneficial.
This patch was tested using 200 instances of netperf TCP_RR with
1400 byte request and one byte reply. Platform is 16 core AMD x86.
No-cache copy disabled:
672703 tps, 97.13% utilization
50/90/99% latency:244.31 484.205 1028.41
No-cache copy enabled:
702113 tps, 96.16% utilization,
50/90/99% latency 238.56 467.56 956.955
Using 14000 byte request and response sizes demonstrate the
effects more dramatically:
No-cache copy disabled:
79571 tps, 34.34 %utlization
50/90/95% latency 1584.46 2319.59 5001.76
No-cache copy enabled:
83856 tps, 34.81% utilization
50/90/95% latency 2508.42 2622.62 2735.88
Note especially the effect on latency tail (95th percentile).
This seems to provide a nice performance improvement and is
consistent in the tests I ran. Presumably, this would provide
the greatest benfits in the presence of an application workload
stressing the cache and a lot of transmit data happening.
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Mon, 4 Apr 2011 14:03:33 +0000 (14:03 +0000)]
bridge: range check STP parameters
Apply restrictions on STP parameters based 802.1D 1998 standard.
* Fixes missing locking in set path cost ioctl
* Uses common code for both ioctl and sysfs
This is based on an earlier patch Sasikanth V but with overhaul.
Note:
1. It does NOT enforce the restriction on the relationship max_age and
forward delay or hello time because in existing implementation these are
set as independant operations.
2. If STP is disabled, there is no restriction on forward delay
3. No restriction on holding time because users use Linux code to act
as hub or be sticky.
4. Although standard allow 0-255, Linux only allows 0-63 for port priority
because more bits are reserved for port number.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Mon, 4 Apr 2011 14:03:32 +0000 (14:03 +0000)]
bridge: allow creating bridge devices with netlink
Add netlink device ops to allow creating bridge device via netlink.
This works in a manner similar to vlan, macvlan and bonding.
Example:
# ip link add link dev br0 type bridge
# ip link del dev br0
The change required rearranging initializtion code to deal with
being called by create link. Most of the initialization happens
in br_dev_setup, but allocation of stats is done in ndo_init callback
to deal with allocation failure. Sysfs setup has to wait until
after the network device kobject is registered.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Mon, 4 Apr 2011 14:03:31 +0000 (14:03 +0000)]
bridge: allow creating/deleting fdb entries via netlink
Use RTM_NEWNEIGH and RTM_DELNEIGH to allow updating of entries
in bridge forwarding table. This allows manipulating static entries
which is not possible with existing tools.
Example (using bridge extensions to iproute2)
# br fdb add 00:02:03:04:05:06 dev eth0
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Mon, 4 Apr 2011 14:03:30 +0000 (14:03 +0000)]
bridge: add netlink notification on forward entry changes
This allows applications to query and monitor bridge forwarding
table in the same method used for neighbor table. The forward table
entries are returned in same structure format as used by the ioctl.
If more information is desired in future, the netlink method is
extensible.
Example (using bridge extensions to iproute2)
# br monitor
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Mon, 4 Apr 2011 14:03:29 +0000 (14:03 +0000)]
bridge: split rcu and no-rcu cases of fdb lookup
In some cases, look up of forward database entry is done with RCU;
and for others no RCU is needed because of locking. Split the two
cases into two differnt loops (and take off inline).
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Mon, 4 Apr 2011 14:03:28 +0000 (14:03 +0000)]
bridge: track last used time in forwarding table
Adds tracking the last used time in forwarding table.
Rename ageing_timer to updated to better describe it.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Mon, 4 Apr 2011 14:03:27 +0000 (14:03 +0000)]
bridge: change arguments to fdb_create
Later patch provides ability to create non-local static entry.
To make this easier move the updating of the flag values to
after the code that creates entry.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Boris Ostrovsky [Mon, 4 Apr 2011 20:07:26 +0000 (13:07 -0700)]
ipv6: Don't pass invalid dst_entry pointer to dst_release().
Make sure dst_release() is not called with error pointer. This is
similar to commit
4910ac6c526d2868adcb5893e0c428473de862b5 ("ipv4:
Don't ip_rt_put() an error pointer in RAW sockets.").
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
John W. Linville [Mon, 4 Apr 2011 17:18:44 +0000 (13:18 -0400)]
iwlwifi: accept EEPROM version 0x423 for iwl6000
A number of these devices have appeared "in the wild", and apparently
the Windows driver is perfectly happy to support this EEPROM version.
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Cc: stable@kernel.org
Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Stanislaw Gruszka [Mon, 4 Apr 2011 11:50:32 +0000 (13:50 +0200)]
rt2x00: fix cancelling uninitialized work
{rx,tx}done_work's are only initialized for usb devices.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: stable@kernel.org
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Larry Finger [Sat, 2 Apr 2011 23:10:22 +0000 (18:10 -0500)]
rtlwifi: Fix some warnings/bugs
Some compiler/architecture combinations generate some warnings that are
not seen on my main system. Two of the "warnings" about unitialized variables
are really bugs.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Christian Lamparter [Sat, 2 Apr 2011 09:31:29 +0000 (11:31 +0200)]
p54usb: IDs for two new devices
Cc: <stable@kernel.org>
Reported-by: Mark Davis [via p54/devices wiki]
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Luciano Coelho [Fri, 1 Apr 2011 16:42:02 +0000 (19:42 +0300)]
wl12xx: fix potential buffer overflow in testmode nvs push
We were allocating the size of the NVS file struct and not checking
whether the length of the buffer passed was correct before copying it
into the allocated memory. This is a security hole because buffer
overflows can occur if the userspace passes a bigger file than what is
expected.
With this patch, we check if the size of the data passed from
userspace matches the size required.
This bug was introduced in 2.6.36.
Cc: stable@kernel.org
Reported-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Jussi Kivilinna [Fri, 1 Apr 2011 16:34:16 +0000 (19:34 +0300)]
zd1211rw: reset rx idle timer from tasklet
2.6.38 added WARN_ON(in_irq) in del_timer_sync that triggers on zd1211rw when
reseting rx idle timer in urb completion handler.
Move timer reseting to tasklet.
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Jussi Kivilinna [Fri, 1 Apr 2011 16:34:08 +0000 (19:34 +0300)]
zd1211rw: remove URB_SHORT_NOT_OK flag in zd_usb_iowrite16v_async()
Patch removes the bogus flag introduced by upstream commit
eefdbec1ea8b7093d2c09d1825f68438701723cf. Old code had buffer length check
that new code tried to handle with URB_SHORT_NOT_OK flag. With USB debugging
enabled bogus flag caused usb_submit_urb fail.
Remove URB_SHORT_NOT_OK flag and add buffer length check to urb completion
handler.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=32092
Reported-by: Jonathan Callen <abcd@gentoo.org>
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Helmut Schaa [Fri, 1 Apr 2011 13:46:05 +0000 (15:46 +0200)]
mac80211: Fix duplicate frames on cooked monitor
Cleaning the ieee80211_rx_data.flags field here is wrong, instead the
flags should be valid accross processing the frame on different
interfaces. Fix this by removing the incorrect flags=0 assignment.
Introduced in commit
554891e63a29af35cc6bb403ef34e319518114d0
(mac80211: move packet flags into packet).
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Fri, 1 Apr 2011 11:52:34 +0000 (13:52 +0200)]
mac80211: fix comment regarding aggregation buf_size
The description for buf_size was misleading and
just said you couldn't TX larger aggregates, but
of course you can't TX aggregates in a way that
would exceed the window either, which is possible
even if the aggregates are shorter than that.
Expand the description, thanks to Emmanuel for
explaining this to me.
Cc: Emmanuel Grumbach <egrumbach@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Senthil Balasubramanian [Fri, 1 Apr 2011 11:46:33 +0000 (17:16 +0530)]
ath9k: Fix phy info print message with AR9485 chipset.
The phy information print during driver init time doesn't show
the numeric part of the chip name properly for AR9485. This patch
addresses this issue by adding the string to the respective array.
Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Luciano Coelho [Wed, 30 Mar 2011 18:31:39 +0000 (21:31 +0300)]
wl12xx: fix module author's email address in the spi and sdio modules
The MODULE_AUTHOR() macro in the main module (wl12xx) has been updated
to reflect one of the author's new email address, but the wl12xx_spi
and wl12xx_sdio modules haven't been updated. This patches updates
them.
Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
John W. Linville [Wed, 30 Mar 2011 18:02:46 +0000 (14:02 -0400)]
b43: allocate receive buffers big enough for max frame len + offset
Otherwise, skb_put inside of dma_rx can fail...
https://bugzilla.kernel.org/show_bug.cgi?id=32042
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: stable@kernel.org
stephen hemminger [Mon, 4 Apr 2011 05:30:58 +0000 (05:30 +0000)]
pkt_sched: QFQ - quick fair queue scheduler
This is an implementation of the Quick Fair Queue scheduler developed
by Fabio Checconi. The same algorithm is already implemented in ipfw
in FreeBSD. Fabio had an earlier version developed on Linux, I just
cleaned it up. Thanks to Eric Dumazet for testing this under load.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ian Campbell [Mon, 4 Apr 2011 18:07:57 +0000 (11:07 -0700)]
xen: netfront: assume all hw features are available until backend connection setup
We need to assume that all features will be available when registering the
netdev otherwise they are ommitted from the initial set of
dev->wanted_features. When we connect to the backed we reduce the set as
necessary due to the call to netdev_update_features() in xennet_connect().
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 4 Apr 2011 17:39:12 +0000 (10:39 -0700)]
Merge branch 'master' of /linux/kernel/git/davem/net-2.6
Florian Westphal [Mon, 4 Apr 2011 15:06:21 +0000 (17:06 +0200)]
netfilter: xt_conntrack: fix inverted conntrack direction test
--ctdir ORIGINAL matches REPLY packets, and vv:
userspace sets "invert_flags &= ~XT_CONNTRACK_DIRECTION" in ORIGINAL
case.
Thus: (CTINFO2DIR(ctinfo) == IP_CT_DIR_ORIGINAL) ^
!!(info->invert_flags & XT_CONNTRACK_DIRECTION))
yields "1 ^ 0", which is true -> returns false.
Reproducer:
iptables -I OUTPUT 1 -p tcp --syn -m conntrack --ctdir ORIGINAL
Signed-off-by: Florian Westphal <fwestphal@astaro.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Florian Westphal [Mon, 4 Apr 2011 15:01:43 +0000 (17:01 +0200)]
netfilter: xt_addrtype: replace rt6_lookup with nf_afinfo->route
This avoids pulling in the ipv6 module when using (ipv4-only) iptables
-m addrtype.
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Florian Westphal [Mon, 4 Apr 2011 15:00:54 +0000 (17:00 +0200)]
netfilter: af_info: add 'strict' parameter to limit lookup to .oif
ipv6 fib lookup can set RT6_LOOKUP_F_IFACE flag to restrict search
to an interface, but this flag cannot be set via struct flowi.
Also, it cannot be set via ip6_route_output: this function uses the
passed sock struct to determine if this flag is required
(by testing for nonzero sk_bound_dev_if).
Work around this by passing in an artificial struct sk in case
'strict' argument is true.
This is required to replace the rt6_lookup call in xt_addrtype.c with
nf_afinfo->route().
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Florian Westphal [Mon, 4 Apr 2011 14:56:29 +0000 (16:56 +0200)]
netfilter: af_info: add network namespace parameter to route hook
This is required to eventually replace the rt6_lookup call in
xt_addrtype.c with nf_afinfo->route().
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Hans Schillstrom [Mon, 4 Apr 2011 13:25:18 +0000 (15:25 +0200)]
IPVS: fix NULL ptr dereference in ip_vs_ctl.c ip_vs_genl_dump_daemons()
ipvsadm -ln --daemon will trigger a Null pointer exception because
ip_vs_genl_dump_daemons() uses skb_net() instead of skb_sknet().
To prevent others from NULL ptr a check is made in ip_vs.h skb_net().
Signed-off-by: Hans Schillstrom <hans.schillstrom@ericsson.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Patrick McHardy <kaber@trash.net>
David Sterba [Mon, 4 Apr 2011 13:21:02 +0000 (15:21 +0200)]
netfilter: h323: bug in parsing of ASN1 SEQOF field
Static analyzer of clang found a dead store which appears to be a bug in
reading count of items in SEQOF field, only the lower byte of word is
stored. This may lead to corrupted read and communication shutdown.
The bug has been in the module since it's first inclusion into linux
kernel.
[Patrick: the bug is real, but without practical consequence since the
largest amount of sequence-of members we parse is 30.]
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Jozsef Kadlecsik [Mon, 4 Apr 2011 13:19:25 +0000 (15:19 +0200)]
netfilter: ipset: references are protected by rwlock instead of mutex
The timeout variant of the list:set type must reference the member sets.
However, its garbage collector runs at timer interrupt so the mutex
protection of the references is a no go. Therefore the reference protection
is converted to rwlock.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Jozsef Kadlecsik [Mon, 4 Apr 2011 13:18:45 +0000 (15:18 +0200)]
netfilter: ipset: list:set timeout variant fixes
- the timeout value was actually not set
- the garbage collector was broken
The variant is fixed, the tests to the ipset testsuite are added.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Jan Engelhardt [Sun, 3 Apr 2011 13:31:06 +0000 (13:31 +0000)]
mISDN: fix "persistant" typo
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mariusz Kozlowski [Mon, 4 Apr 2011 05:04:01 +0000 (22:04 -0700)]
mlx4: fix kfree on error path in new_steering_entry()
On error path kfree() should get pointer to memory allocated by
kmalloc() not the address of variable holding it (which is on stack).
Signed-off-by: Mariusz Kozlowski <mk@lab.zgora.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
This page took 0.044144 seconds and 5 git commands to generate.