Johannes Berg [Fri, 18 Nov 2011 15:54:50 +0000 (16:54 +0100)]
cfg80211/mac80211: Revert "move information element parsing logic to cfg80211"
No other driver ever ended up using this, and
the commit forgot to move the prototype so no
driver could have used it. Revert it, if any
driver shows up and needs it it can be moved
again, but until then it's more efficient to
have it in mac80211 where the only user is.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Fri, 18 Nov 2011 15:23:01 +0000 (16:23 +0100)]
nl80211: make get_vlan logic more common
get_vlan() sets the output parameter even if it
returns an error, which is a bit odd. Instead,
convert it to use ERR_PTR.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Fri, 18 Nov 2011 14:33:48 +0000 (15:33 +0100)]
cfg80211: add flags for off-channel capabilities
Currently mac80211 implements these for all devices,
but given restrictions of some devices that isn't
really true, so prepare for being able to remove the
capability for some mac80211 devices.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Fri, 18 Nov 2011 14:27:31 +0000 (15:27 +0100)]
mac80211: minor cleanup to mesh state locking
First time I tried smatch, and it says:
mesh_hwmp.c +870 mesh_queue_preq(21) error: double lock 'bottom_half:'
mesh_hwmp.c +873 mesh_queue_preq(24) error: double unlock 'bottom_half:'
mesh_hwmp.c +886 mesh_queue_preq(37) error: double unlock 'bottom_half:'
Which is indeed true -- there's no point in disabling BHs
again if we just did that a few lines earlier, so remove.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Joe Perches [Fri, 18 Nov 2011 01:46:15 +0000 (17:46 -0800)]
iwl-debug: Shrink object by using dev_err and deduplicating formats
Using dev_err instead of dev_printk(KERN_ERR uses fewer
arguments and is a bit smaller.
Deduplicating formats used by IWL_DEBUG_QUIET_RFKILL also
makes the object a bit smaller.
Neatened the macros, used ##__VA_ARGS__.
$ size drivers/net/wireless/iwlwifi/built-in.o*
text data bss dec hex filename
462652 8646 92576 563874 89aa2 drivers/net/wireless/iwlwifi/built-in.o.new
467557 8646 92592 568795 8addb drivers/net/wireless/iwlwifi/built-in.o.old
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Wey-Yi Guy [Fri, 18 Nov 2011 00:05:13 +0000 (16:05 -0800)]
iwlwifi: remove redundancy
just use iwl_bus, remove the redundancy
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Emmanuel Grumbach [Fri, 18 Nov 2011 00:05:12 +0000 (16:05 -0800)]
iwlwifi: tid_data is taken twice in iwl_trans_pcie_tx_agg_alloc
Remove this redundancy.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Emmanuel Grumbach [Fri, 18 Nov 2011 00:05:11 +0000 (16:05 -0800)]
iwlwifi: fix endianity issues in debug prints
Use the CPUed version of the variables when printing data from the
BA notification.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Emmanuel Grumbach [Fri, 18 Nov 2011 00:05:10 +0000 (16:05 -0800)]
iwlwifi: improve the prints in the reclaim path
Some information was redundation, other was missing.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Emmanuel Grumbach [Fri, 18 Nov 2011 00:05:09 +0000 (16:05 -0800)]
iwlwifi: check the HW when a queue is stuck
Add more information when a queue is stuck and actually get
information from the scheduler instead of looking at internal
variables.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Thomas Meyer [Thu, 17 Nov 2011 22:43:40 +0000 (23:43 +0100)]
brcm80211: smac: Use kmemdup rather than duplicating its implementation
The semantic patch that makes this change is available
in scripts/coccinelle/api/memdup.cocci.
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Acked-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Larry Finger [Thu, 17 Nov 2011 18:14:45 +0000 (12:14 -0600)]
rtlwifi: Remove redundant code from PCI interrupt
The interrupt routine for PCI devices has a special exit that
executes the same instructions as does the normal exit.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Larry Finger [Thu, 17 Nov 2011 18:14:44 +0000 (12:14 -0600)]
rtlwifi: rtl8192cu: Fix endianian issues
Driver rtlwifi fails on a big-endian host.
These changes have been tested on a Mac PowerBook G4, which has
a PPC processor.
Although this patch touches some of the code that will affect endian
issues on PCI hardware through drivers rtl8192ce, rtl8192se, and
rtl8192de, these have not been tested due to lack of suitable hardware.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Larry Finger [Thu, 17 Nov 2011 18:14:43 +0000 (12:14 -0600)]
rtlwifi: rtl8192cu: Change firmware upload to use block writes
Driver rtl8192cu writes the firmware with 32-bit asynchronous writes. This
design is OK for USB 2.0 adapters, but the current implementation of
xhcu-hcd has a limited ring size, which is exceeded. By converting to
synchronous block writes, this error is avoided.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
George [Thu, 17 Nov 2011 18:14:42 +0000 (12:14 -0600)]
rtlwifi: rtl8192cu: Allow retries for USB I/O
The USB driver does not retry reads - allow 10 tries.
Signed-off-by: George <george0505@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Kalle Valo [Thu, 17 Nov 2011 17:06:10 +0000 (19:06 +0200)]
nl80211: add testmode to the list of supported commands
User space might want to test if driver supports testmode. Adding testmode
to the list of supported commands makes this easier.
I omitted testmode_dump() in purpose. I assume all drivers implementing
testmode_dump() will also implement testmode_cmd().
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Thu, 17 Nov 2011 15:23:29 +0000 (16:23 +0100)]
mac80211: remove unused ASSOC_AP flag
WLAN_STA_ASSOC_AP indicates that the station entry
is for an AP we're associated to but isn't used so
remove it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Wed, 16 Nov 2011 15:02:47 +0000 (16:02 +0100)]
mac80211: transmit fragment list to drivers
Drivers can usually handle fragmented packets
much easier when they get the entire list of
fragments at once. The only thing they need to
do is keep enough space on the queues for up
to ten fragments of a single MSDU.
This allows them to implement this with a new
operation tx_frags.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Wed, 16 Nov 2011 14:28:57 +0000 (15:28 +0100)]
mac80211: make TX LED handling independent of fragmentation
This just prepares for passing the entire fragment
list to the driver. No significant changes, but the
TX throughput is calculated slightly differently
now and we blink only once for each MSDU.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Wed, 16 Nov 2011 14:28:56 +0000 (15:28 +0100)]
mac80211: move fragment flag adjustment
Instead of adjusting the fragment flags at
TX time, adjust them at fragmentation time.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Wed, 16 Nov 2011 14:28:55 +0000 (15:28 +0100)]
mac80211: use skb list for fragments
We are currently linking the skbs by using skb->next
directly. This works, but the preferred way is to use
a struct sk_buff_head instead. That also prepares for
passing that to drivers directly.
While at it I noticed we calculate the duration for
fragments twice -- remove one of them.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Zefir Kurtisi [Wed, 16 Nov 2011 10:09:44 +0000 (11:09 +0100)]
ath9k: trivial: reorder rx_tasklet processing
DFS events are reported as PHY errors and need to be processed
with a correct timestamp set before ath9k_skb_preprocess() is
called and the frame is possibly dropped.
This patch puts the rxs->mactime calculation before the skb
is preprocessed to prepare for DFS event reporting.
Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Luis R. Rodriguez [Tue, 11 Oct 2011 17:59:03 +0000 (10:59 -0700)]
cfg80211: pass DFS region to drivers through reg_notifier()
This grants drivers access to the DFS region that a
regulatory domain belongs to.
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Luis R. Rodriguez [Tue, 11 Oct 2011 17:59:02 +0000 (10:59 -0700)]
cfg80211: process regulatory DFS region for countries
The wireless-regdb now has support for mapping a country to
one DFS region. CRDA sends this to us now so process it
so we can provide that hint to drivers. This will later be
used by code for processing DFS in a way that meets the
criteria for the DFS region the country belongs to.
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
John W. Linville [Mon, 21 Nov 2011 21:00:56 +0000 (16:00 -0500)]
Merge branch 'for-linville' of git://github.com/sgruszka/iwlegacy
Bing Zhao [Thu, 17 Nov 2011 04:40:35 +0000 (20:40 -0800)]
mwifiex: add support for Marvell sd8797 device
This patch supports Marvell chipset 88W8797 (Avastar) with
SDIO interface.
The corresponding firmware image file is located at:
"mrvl/sd8797_uapsta.bin"
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Tristan Xu <xurf@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kiran Divekar <dkiran@marvell.com>
Signed-off-by: Frank Huang <frankh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Michael Büsch [Wed, 16 Nov 2011 22:51:20 +0000 (23:51 +0100)]
p54spi: Remove FIXME in op_stop
Don't use the interruptible variant of mutex_lock(). It doesn't really
need to be interruptible. This avoids nasty error handling.
Signed-off-by: Michael Buesch <m@bues.ch>
Acked-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Felix Fietkau [Wed, 16 Nov 2011 12:34:55 +0000 (13:34 +0100)]
mac80211: call ieee80211_recalc_idle() after sending packets
Some drivers (e.g. ath9k) assume that it's safe to go into low-power mode
immediately after the idle state changes. To support that, mac80211 even
calls drv_flush() before that happens.
In some instances, mac80211 sent a packet right after recalculating the
idle state, this patch fixes that.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rick Jones [Tue, 15 Nov 2011 18:40:49 +0000 (10:40 -0800)]
wireless: use strlcpy routine in .get_drvinfo
Convert various seemingly still compiled wireless drivers' .get_drvinfo
routines to use the preferred strlcpy() routine.
Signed-off-by: Rick Jones <rick.jones2@hp.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Patrick Kelle [Tue, 15 Nov 2011 15:44:48 +0000 (16:44 +0100)]
minstrel_ht: Remove unused function parameters
Remove unused function parameters in the following functions:
minstrel_calc_rate_ewma()
minstrel_ht_calc_tp()
minstrel_aggr_check()
minstrel_ht_set_rate()
Signed-off-by: Patrick Kelle <patrick.kelle81@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Carpenter [Tue, 15 Nov 2011 06:33:31 +0000 (09:33 +0300)]
mac80211: memory leak in mesh_queue_preq()
We recently introduced a return here, but we need to call kfree
first.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Carpenter [Tue, 15 Nov 2011 06:33:09 +0000 (09:33 +0300)]
mac80211: use kfree_skb() instead of kfree()
sk_buff structs should be freed using kfree_skb().
This was introduced recently in
029458212 "mac80211: Save probe
response data for bss".
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Helmut Schaa [Mon, 14 Nov 2011 14:28:20 +0000 (15:28 +0100)]
mac80211: Get rid of search loop for rate group index
Finding the group index for a specific rate is done by looping through
all groups and returning if the correct one is found. This code is
called for each tx'ed frame and thus it makes sense to reduce its
runtime.
Do this by calculating the group index by this formula based on the SGI
and HT40 flags as well as the stream number:
idx = (HT40 * 2 * MINSTREL_MAX_STREAMS) +
(SGI * MINSTREL_MAX_STREAMS) +
(streams - 1)
Hence, the groups are ordered by th HT40 flag first, then by the SGI
flag and afterwards by the number of used streams.
This should reduce the runtime of minstrel_ht_get_group_idx
considerable.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Acked-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Helmut Schaa [Mon, 14 Nov 2011 14:28:19 +0000 (15:28 +0100)]
mac80211: Check rate->idx before rate->count
The drivers are not required to fill in rate->count if rate->idx is set
to -1. Hence, we should first check rate->idx before accessing
rate->count.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Acked-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Mon, 14 Nov 2011 14:02:44 +0000 (15:02 +0100)]
mac80211: remove crypto special case for auth frames
The shared key authentication frame that needs to be
encrypted (the third one in the shared key handshake)
is directly encrypted in ieee80211_send_auth and the
IEEE80211_TX_INTFL_DONT_ENCRYPT is set. All others
are not encrypted, so the only way to get to this is
erroneously on no-monitor AP side.
Remove the special case for authentication frames to
fix the AP shared key side when operating without
cooked monitor interfaces -- with cooked monitor the
IEEE80211_TX_INTFL_DONT_ENCRYPT also gets set, so we
never get here -- an AP never encrypts auth frames.
Without this patch, an AP operating in WEP mode with
my no-monitor patches would erroneously encrypt all
authentication frames, instead of none.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Joe Perches [Sun, 13 Nov 2011 19:41:04 +0000 (11:41 -0800)]
brcmsmac: Use current logging styles
Add and use pr_fmt and pr_<level>
Remove useless double parentheses from macros.
Remove function names from format strings, add to pr_debug use.
Coalesce formats.
Remove uncompileable undeclared variable in a DMA_NONE use.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Ilan Elias [Sun, 13 Nov 2011 08:14:30 +0000 (10:14 +0200)]
NFC: Fix indentation in nci.h file
Fix indentation in nci.h file.
Signed-off-by: Ilan Elias <ilane@ti.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rajkumar Manoharan [Sat, 12 Nov 2011 14:05:48 +0000 (19:35 +0530)]
ath9k_hw: set btcoex weights for AR9462
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rajkumar Manoharan [Sat, 12 Nov 2011 14:05:47 +0000 (19:35 +0530)]
ath9k_hw: Cleanup btcoex wlan weights
Remove all wlan weight macros and group it together for better
understanding & readability. It makes the code reusable for
AR9462 wlan weights.
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rajkumar Manoharan [Sat, 12 Nov 2011 14:05:46 +0000 (19:35 +0530)]
ath9k: Remove enabling btcoex from stomp type change
This patch removes btcoex_enable from stomp type change and let
it be called from callee functions that makes the code can be
reusable for MCI changes.
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
John W. Linville [Thu, 17 Nov 2011 20:16:55 +0000 (15:16 -0500)]
Merge branch 'for-linville' of git://github.com/kvalo/ath6kl
Greg Dietsche [Wed, 7 Sep 2011 00:11:35 +0000 (19:11 -0500)]
iwlegacy: debugfs_ops should depend on CONFIG_IWLEGACY_DEBUGFS
Only setup structs related to debugfs_ops when CONFIG_IWLEGACY_DEBUGFS is set.
Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Greg Dietsche [Tue, 6 Sep 2011 23:25:32 +0000 (18:25 -0500)]
iwlegacy: 4965-rs: cleanup il4965_rs_sta_dbgfs_rate_scale_data_read
1) remove ret local var and return the result directly
2) remove il since it is not used
Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Greg Dietsche [Tue, 6 Sep 2011 22:49:07 +0000 (17:49 -0500)]
iwlegacy: 4965-rs: don't return rate from il4965_rs_update_rate_tbl
1) don't return rate from il4965_rs_update_rate_tbl
2) fix up il4965_rs_rate_scale_perform
Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Greg Dietsche [Tue, 6 Sep 2011 23:12:05 +0000 (18:12 -0500)]
iwlegacy: 4965-rs: il4965_rs_alloc_sta: remove lq_sta local var
remove the lq_sta local variable and return the
result directly in il4965_rs_alloc_sta
Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Greg Dietsche [Tue, 6 Sep 2011 23:31:13 +0000 (18:31 -0500)]
iwlegacy: 4965-rs: remove unnecessary null check for sta and lq_sta
both sta and lq_sta are guaranteed to be not null in the calling
function so we don't need to check them here.
Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Greg Dietsche [Tue, 6 Sep 2011 22:38:34 +0000 (17:38 -0500)]
iwlegacy: 4965-rs: remove null check on sta in il4965_rs_tx_status
the null check on sta in il4965_rs_tx_status is not necessary
Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Greg Dietsche [Tue, 6 Sep 2011 22:33:51 +0000 (17:33 -0500)]
iwlegacy: 4965: remove vif null check in request_scan
remove null check on vif in il4965_request_scan
Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Stanislaw Gruszka [Tue, 15 Nov 2011 14:20:03 +0000 (15:20 +0100)]
iwlegacy: remove unused IL_AC_UNSET define
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Greg Dietsche [Sun, 28 Aug 2011 13:32:10 +0000 (08:32 -0500)]
iwlegacy: change IL_ERR to D_HT in iwl4965_rs_tl_turn_on_agg_for_tid
This message should be a debug message and not an error.
Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Greg Dietsche [Sun, 28 Aug 2011 13:26:16 +0000 (08:26 -0500)]
iwlegacy: change IL_WARN to D_HT in il4965_tx_agg_start
This message should be a debug message and not a warning.
Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Stanislaw Gruszka [Tue, 15 Nov 2011 13:51:01 +0000 (14:51 +0100)]
iwlegacy: checkpatch.pl fixes
Fix most checkpatch.pl ERRORs and some WARNINGs.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Stanislaw Gruszka [Tue, 15 Nov 2011 13:45:59 +0000 (14:45 +0100)]
iwlegacy: indentions and whitespaces
Process iwlegacy source files using:
indent -npro -l500 -nhnl
indent -npro -kr -i8 -ts8 -sob -l80 -nbbo -ss -ncs -cp1 -il0 -psl
Plus manual compilation fixes.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Stanislaw Gruszka [Wed, 31 Aug 2011 12:49:56 +0000 (14:49 +0200)]
iwlegacy: merge iwl-debug.h into common.h
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Stanislaw Gruszka [Tue, 15 Nov 2011 13:24:36 +0000 (14:24 +0100)]
iwlegacy: rename iwl-debug.c to debug.c
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Stanislaw Gruszka [Wed, 31 Aug 2011 12:29:46 +0000 (14:29 +0200)]
iwlegacy: merge iwl-fh.h into 4965.h
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Stanislaw Gruszka [Wed, 31 Aug 2011 12:20:23 +0000 (14:20 +0200)]
iwlegacy: use FH49_ prefix in 4965 code
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Stanislaw Gruszka [Wed, 31 Aug 2011 12:14:18 +0000 (14:14 +0200)]
iwlegacy: use FH39_ prefix in 3945 code
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Stanislaw Gruszka [Wed, 31 Aug 2011 12:09:39 +0000 (14:09 +0200)]
iwlegacy: rename iwl-prph.h to prph.h
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Stanislaw Gruszka [Wed, 31 Aug 2011 12:04:45 +0000 (14:04 +0200)]
iwlegacy: merge iwl-{eeprom,led}.h into common.h
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Stanislaw Gruszka [Wed, 31 Aug 2011 11:53:04 +0000 (13:53 +0200)]
iwlegacy: merge iwl-power.h into common.h
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Stanislaw Gruszka [Wed, 31 Aug 2011 11:39:29 +0000 (13:39 +0200)]
iwlegacy: merge iwl-legacy-rs.h into common.h
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Stanislaw Gruszka [Wed, 31 Aug 2011 11:24:32 +0000 (13:24 +0200)]
iwlegacy: remove iwl-helpers.h
This file was already merged into common.h
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Stanislaw Gruszka [Wed, 31 Aug 2011 11:23:20 +0000 (13:23 +0200)]
iwlegacy: merge common header files
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Stanislaw Gruszka [Tue, 15 Nov 2011 13:19:34 +0000 (14:19 +0100)]
iwlegacy: rename iwl-core.h to common.h
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Stanislaw Gruszka [Wed, 31 Aug 2011 09:19:51 +0000 (11:19 +0200)]
iwlegacy: rename iwl-csr.h to csr.h
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Stanislaw Gruszka [Wed, 31 Aug 2011 09:18:16 +0000 (11:18 +0200)]
iwlegacy: move IL_MASK
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Stanislaw Gruszka [Wed, 31 Aug 2011 09:13:05 +0000 (11:13 +0200)]
iwlegacy: remove il_ieee80211_get_hw_conf
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Stanislaw Gruszka [Wed, 31 Aug 2011 08:59:02 +0000 (10:59 +0200)]
iwlegacy: rename iwl-commands.h to commands.h
On the way remove also not needed iwl-fh.h include.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Stanislaw Gruszka [Tue, 15 Nov 2011 12:42:04 +0000 (13:42 +0100)]
iwlegacy: rename module name
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Stanislaw Gruszka [Tue, 15 Nov 2011 12:40:15 +0000 (13:40 +0100)]
iwlegacy: merge common .c files
Merge iwl-{tx,rx,sta,scan,power,eeprom,led,hcmd}.c into common.c .
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Stanislaw Gruszka [Tue, 15 Nov 2011 12:18:51 +0000 (13:18 +0100)]
iwlegacy: rename iwl-core.c to common.c
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Stanislaw Gruszka [Tue, 15 Nov 2011 12:16:38 +0000 (13:16 +0100)]
iwlegacy: rename other handlers
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Stanislaw Gruszka [Tue, 30 Aug 2011 13:45:31 +0000 (15:45 +0200)]
iwlegacy: s/rx_reply/hdl/
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Stanislaw Gruszka [Tue, 30 Aug 2011 13:39:42 +0000 (15:39 +0200)]
iwlegacy: s/rx_handler/handler/
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Stanislaw Gruszka [Tue, 30 Aug 2011 13:26:35 +0000 (15:26 +0200)]
iwlegacy: rename REPLY_ to N_ or C_
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Stanislaw Gruszka [Tue, 15 Nov 2011 12:11:50 +0000 (13:11 +0100)]
iwlegacy: s/STATISTICS/STATS/
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Stanislaw Gruszka [Tue, 15 Nov 2011 12:09:01 +0000 (13:09 +0100)]
iwlegacy: s/STATUS_/S_/
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Stanislaw Gruszka [Tue, 30 Aug 2011 12:12:12 +0000 (14:12 +0200)]
iwlegacy: move iwl-3945-{,hw,fh,debugfs}.h to 3945.h
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Stanislaw Gruszka [Tue, 30 Aug 2011 11:58:27 +0000 (13:58 +0200)]
iwlegacy: move iwl-4965-{,hw,debugfs,calib}.h to 4965.h
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Stanislaw Gruszka [Tue, 15 Nov 2011 11:57:25 +0000 (12:57 +0100)]
iwlegacy: add accidentally removed comments
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Stanislaw Gruszka [Tue, 6 Sep 2011 10:28:10 +0000 (12:28 +0200)]
iwlegacy: rename iwl-3945-{rs,debugfs}.c to 3945-{rs,debug}.c
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Stanislaw Gruszka [Tue, 30 Aug 2011 11:14:41 +0000 (13:14 +0200)]
iwlegacy: rename iwl-4965-{rs,calib,debugfs}.c to 4965-{rs,calib,debug}.c
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Stanislaw Gruszka [Tue, 30 Aug 2011 11:06:03 +0000 (13:06 +0200)]
iwlegacy: merge iwl-4965-lib.c into 4965-mac.c
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Stanislaw Gruszka [Tue, 15 Nov 2011 11:50:37 +0000 (12:50 +0100)]
iwlegacy: merge iwl-4965-{tx,rx}.c into 4965-mac.c
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Stanislaw Gruszka [Tue, 30 Aug 2011 10:58:35 +0000 (12:58 +0200)]
iwlegacy: merge iwl-4965-sta.c into 4965-mac.c
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Stanislaw Gruszka [Tue, 30 Aug 2011 10:50:25 +0000 (12:50 +0200)]
iwlegacy: merge iwl-4965-ucode.c into 4965.c
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Stanislaw Gruszka [Tue, 30 Aug 2011 10:45:25 +0000 (12:45 +0200)]
iwlegacy: merge iwl-4965-eeprom.c into 4965.c
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Stanislaw Gruszka [Mon, 29 Aug 2011 15:05:28 +0000 (17:05 +0200)]
iwlegacy: merge iwl-3945-led.c into 3945.c
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Stanislaw Gruszka [Mon, 29 Aug 2011 14:59:15 +0000 (16:59 +0200)]
iwlegacy: merge iwl-4965-led.c into 4965.c
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Stanislaw Gruszka [Tue, 15 Nov 2011 11:40:26 +0000 (12:40 +0100)]
iwlegacy: rename base 4965 and 3945 file names
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Stanislaw Gruszka [Mon, 29 Aug 2011 10:52:20 +0000 (12:52 +0200)]
iwlegacy: remove for_each_context
We do not support many contexts.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Stanislaw Gruszka [Fri, 26 Aug 2011 14:29:35 +0000 (16:29 +0200)]
iwlegacy: s/TABLE/TBL/
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Stanislaw Gruszka [Tue, 15 Nov 2011 11:30:17 +0000 (12:30 +0100)]
iwlegacy: s/index/idx/
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Stanislaw Gruszka [Fri, 26 Aug 2011 14:10:40 +0000 (16:10 +0200)]
iwlegacy: s/INDEX/IDX/
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Stanislaw Gruszka [Fri, 26 Aug 2011 14:07:43 +0000 (16:07 +0200)]
iwlegacy: s/IL_RATE/RATE/
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Stanislaw Gruszka [Fri, 26 Aug 2011 13:49:28 +0000 (15:49 +0200)]
iwlegacy: s/window/win/
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Stanislaw Gruszka [Fri, 26 Aug 2011 13:43:47 +0000 (15:43 +0200)]
iwlegacy: s/statistics/stats/
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Stanislaw Gruszka [Fri, 26 Aug 2011 12:37:54 +0000 (14:37 +0200)]
iwlegacy: s/il_rx_mem_buffer/il_rx_buf/
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Stanislaw Gruszka [Tue, 15 Nov 2011 10:29:04 +0000 (11:29 +0100)]
iwlegacy: partial rxon context cleanup
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
This page took 0.04096 seconds and 5 git commands to generate.