Yao Qi [Tue, 4 Aug 2015 13:34:14 +0000 (14:34 +0100)]
Move have_ptrace_getregset to linux-low.c
This patch moves variable have_ptrace_getregset from linux-x86-low.c
to linux-low.c, so that arm can use it too.
gdb/gdbserver:
2015-08-04 Yao Qi <yao.qi@linaro.org>
* linux-x86-low.c (have_ptrace_getregset): Move it to ...
* linux-low.c: ... here.
* linux-low.h (have_ptrace_getregset): Declare it.
Jan Kratochvil [Tue, 4 Aug 2015 11:42:56 +0000 (13:42 +0200)]
signal_command: Leftover cleanup chain regression
gdb/ChangeLog
2015-08-04 Jan Kratochvil <jan.kratochvil@redhat.com>
* infcmd.c (signal_command): Call do_cleanups for args_chain.
Jan Kratochvil [Tue, 4 Aug 2015 11:40:44 +0000 (13:40 +0200)]
ASAN attach crash - 7.9 regression
-fsanitize=address
gdb.base/attach-pie-noexec.exp
==32586==ERROR: AddressSanitizer: heap-use-after-free on address 0x60200004ed90 at pc 0x48ad50 bp 0x7ffceb3aef50 sp 0x7ffceb3aef20
READ of size 2 at 0x60200004ed90 thread T0
#0 0x48ad4f in __interceptor_strlen (/home/jkratoch/redhat/gdb-test-asan/gdb/gdb+0x48ad4f)
#1 0xeafe5c in xstrdup xstrdup.c:33
#2 0x85e024 in attach_command /home/jkratoch/redhat/gdb-test-asan/gdb/infcmd.c:2680
regressed by:
commit
6c4486e63f7583ed85a0c72841f6ccceebbf858e
Author: Pedro Alves <palves@redhat.com>
Date: Fri Oct 17 13:31:26 2014 +0100
PR gdb/17471: Repeating a background command makes it foreground
gdb/ChangeLog
2015-08-04 Jan Kratochvil <jan.kratochvil@redhat.com>
PR gdb/18767
* infcmd.c (attach_command): Move ARGS_CHAIN cleanup after last ARGS
use.
Andrew Burgess [Tue, 28 Jul 2015 18:14:37 +0000 (19:14 +0100)]
ld: map option for run_dump_test requires no program.
When using run_dump_test with the map option to compare the linker map
file produced, no additional dump program should be required. A dump
program can still be given if needed, but leaving it off will no longer
produce an error.
ld/testsuite/ChangeLog:
* ld/ld-lib.exp (run_dump_test): When using the map option, no
program is required.
Andrew Burgess [Tue, 28 Jul 2015 15:20:41 +0000 (16:20 +0100)]
ld: Add file based error/warning regexp for run_dump_test.
The run_dump_test mechanism supports options error and warning, which
allow regexp to be specified within the test file, these regexp are
matched against the stderr output from the linker.
Similar dump test style functions for gas and gdb also support file
based matching versions of these options; the patterns are placed into a
file which the test driver then references. It is sometimes clearer,
when the pattern to be matched spans multiple lines if the patterns can
be placed into a separate file.
This patch adds new options error_output and warning_output for the
linker run_dump_test function. These new options take a filename
parameter, this file is then used (with regexp_diff) to compare against
the linker output.
ld/testsuite/ChangeLog:
* ld/ld-lib.exp (run_dump_test): Add error_output and
warning_output options.
Andrew Burgess [Wed, 15 Jul 2015 17:37:30 +0000 (18:37 +0100)]
ld: Add '--require-defined' command line option.
Add a new command line option '--require-defined' to the linker. This
option operates identically to the '--undefined' option, except that if
the symbol is not defined in the final output file then the linker will
exit with an error.
When making use of --gc-section, or just when trying to pull in parts of
a library, it is not uncommon for a user to use the '--undefined'
command line option to specify a symbol that the user then expects to be
defined by one of the object files supplied to the link.
However, if for any reason the symbol is not satisfied by an object
provided to the link the user will be left with an undefined symbol in
the output file, instead of a defined symbol.
In some cases the above behaviour is what the user wants, in other cases
though we can do better. The '--require-defined' option tries to fill
this gap. The symbol passed to the '--require-defined' option is
treated exactly as if the symbol was passed to '--undefined', however,
before the linker exits a check is made that all symbols passed to
'--require-defined' are actually defined, if any are not then the link
will fail with an error.
ld/ChangeLog:
* ld.texinfo (Options): Document --require-defined option.
* ldlang.c (struct require_defined_symbol): New structure.
(require_defined_symbol_list): New variable.
(ldlang_add_require_defined): New function.
(ldlang_check_require_defined_symbols): New function.
(lang_process): Check required symbols are defined.
* ldlang.h (ldlang_add_require_defined): Declare.
* ldlex.h (enum option_values): Add OPTION_REQUIRE_DEFINED_SYMBOL.
* lexsup.c (ld_options): Add '--require-defined' entry.
(parse_args): Handle '--require-defined' entry.
* NEWS: Mention new '--require-defined' option.
ld/testsuite/ChangeLog:
* ld-undefined/require-defined-1.d: New file.
* ld-undefined/require-defined-2.d: New file.
* ld-undefined/require-defined-3.d: New file.
* ld-undefined/require-defined-4.d: New file.
* ld-undefined/require-defined-5.d: New file.
* ld-undefined/require-defined.exp: New file.
* ld-undefined/require-defined.s: New file.
Pedro Alves [Tue, 4 Aug 2015 08:39:47 +0000 (09:39 +0100)]
C++: dlsym casts in gdb/linux-thread-db.c and gdb/gdbserver/thread-db.c
Implicit void * -> function pointer conversion doesn't work in C++, so
in C++, we need to cast the result of dlsym. This adds a few typedefs
and macros that make this easy. GDBserver's version already had the
CHK macro, so I added it to GDB too.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/gdbserver/ChangeLog:
2015-08-04 Pedro Alves <palves@redhat.com>
* thread-db.c (struct thread_db): Use new typedefs.
(try_thread_db_load_1): Define local TDB_DLSYM macro and use it in
CHK calls.
(disable_thread_event_reporting): Cast result of dlsym to
destination function pointer type.
(thread_db_mourn): Use td_ta_delete_ftype.
gdb/ChangeLog:
2015-08-04 Pedro Alves <palves@redhat.com>
* nat/gdb_thread_db.h (td_init_ftype, td_ta_new_ftype)
(td_ta_map_lwp2thr_ftype, td_ta_thr_iter_ftype)
(td_ta_event_addr_ftype, td_ta_set_event_ftype)
(td_ta_clear_event_ftype, td_ta_event_getmsg_ftype)
(td_thr_validate_ftype, td_thr_get_info_ftype)
(td_thr_event_enable_ftype, td_thr_tls_get_addr_ftype)
(td_thr_tlsbase_ftype, td_symbol_list_ftype, td_ta_delete_ftype):
New typedefs.
* linux-thread-db.c (struct thread_db_info): Use new typedefs.
(try_thread_db_load_1): Define TDB_VERBOSE_DLSYM, TDB_DLSYM , CHK
local macros and use them instead of verbose_dlsym and dlsym
calls.
Nick Clifton [Tue, 4 Aug 2015 07:19:12 +0000 (08:19 +0100)]
Update description of proc run_dump_test
* lib/utils-lib.exp (run_dump_test): Document DUMPPROG, readelf
and size parameters. Alpha-sort switch tables. Include
addr2line, and size in list of possible auto-detected dump
programs.
Thomas Preud'homme [Thu, 16 Jul 2015 09:51:04 +0000 (17:51 +0800)]
2015-08-04 Thomas Preud'homme <thomas.preudhomme@arm.com>
* doc/c-aarch64.texi (.xword): Document directive.
GDB Administrator [Tue, 4 Aug 2015 00:00:08 +0000 (00:00 +0000)]
Automatic date update in version.in
Andrew Burgess [Tue, 14 Jul 2015 15:19:22 +0000 (16:19 +0100)]
ld/doc: Document that multiple MEMORY commands are allowed.
The linker documentation explicitly states that there can be only one
MEMORY command. This is not true. Multiple MEMORY commands are
allowed, the contents of all will be treated as if a single MEMORY
command was given.
Update the documentation to make this clear to the users.
ld/ChangeLog:
* ld.texinfo (MEMORY): Explain that multiple MEMORY commands are
acceptable.
Hans-Peter Nilsson [Mon, 3 Aug 2015 18:44:05 +0000 (20:44 +0200)]
Fix ChangeLog for "FAIL: -Bsymbolic-functions" for cris-linux in ld
It's bfd_link_info, not elf_link_hash_entry, for the old reference:
* elf32-cris.c (cris_elf_relocate_section)
(elf_cris_finish_dynamic_symbol, cris_elf_check_relocs)
(elf_cris_discard_excess_dso_dynamics): Use SYMBOLIC_BIND, not
just bfd_link_info->symbolic, to check if a symbol should be bound
symbolically.
Sandra Loosemore [Mon, 3 Aug 2015 18:39:52 +0000 (11:39 -0700)]
Nios II R2 support for GDB.
2015-08-03 Sandra Loosemore <sandra@codesourcery.com>
gdb/
* nios2-tdep.h: Include opcode/nios2.h here.
(NIOS2_CDX_OPCODE_SIZE): New.
(struct gdbarch_tdep): Add OP parameter to syscall_next_pc.
* nios2-tdep.c: Don't include opcode/nios2.h here.
(nios2_fetch_insn): For R2, try reading 2-byte instruction if
4-byte read fails.
(nios2_match_add, nios2_match_sub): Add cases for R2 encodings.
(nios2_match_addi, nios2_match_orhi): Likewise.
(nios2_match_stw, nios2_match_ldw): Likewise.
(nios2_match_rdctl): Likewise.
(nios2_match_stwm, nios2_match_ldwm): New.
(nios2_match_branch): Add cases for R2 encodings.
(nios2_match_jmpi, nios2_match_calli): Likewise.
(nios2_match_jmpr, nios2_match_callr): Likewise.
(nios2_match_break, nios2_match_trap): Likewise.
(nios2_in_epilogue_p): Add R2 support.
(nios2_analyze_prologue): Update comments. Recognize R2 CDX
prologues.
(nios2_breakpoint_from_pc): Handle R2 instructions.
(nios2_get_next_pc): Likewise. Adjust call to
tdep->syscall_next_pc.
* nios2-linux-tdep.c (nios2_r1_linux_rt_sigreturn_tramp_frame):
Renamed from nios2_linux_rt_sigreturn_tramp_frame. Use
instruction field macros instead of literal hex values.
(nios2_r2_linux_rt_sigreturn_tramp_frame): New.
(nios2_linux_syscall_next_pc): Adjust signature to pass OP.
Use size field from OP instead of assuming all instructions
are the same size.
(nios2_linux_init_abi): Register appropriate unwinder for mach.
gdb/gdbserver/
* linux-nios2-low.c (NIOS2_BREAKPOINT): Conditionalize for
arch variant.
(CDX_BREAKPOINT): Define for R2.
(nios2_breakpoint_at): Check for CDX_BREAKPOINT when R2.
(the_low_target): Add comments.
Hans-Peter Nilsson [Mon, 3 Aug 2015 18:34:51 +0000 (20:34 +0200)]
Fix "FAIL: -Bsymbolic-functions" for cris-linux in ld
* elf32-cris.c (cris_elf_relocate_section)
(elf_cris_finish_dynamic_symbol, cris_elf_check_relocs)
(elf_cris_discard_excess_dso_dynamics): Use SYMBOLIC_BIND, not
just h->symbolic, to check if a symbol should be bound
symbolically.
Sandra Loosemore [Mon, 3 Aug 2015 18:09:32 +0000 (11:09 -0700)]
Further robustify gdb.base/bp-permanent.exp.
2015-08-03 Sandra Loosemore <sandra@codesourcery.com>
gdb/testsuite/
* gdb.base/bp-permanent.exp: Report test as unsupported if
the target cannot stop at the permanent breakpoint.
Pedro Alves [Mon, 3 Aug 2015 17:55:12 +0000 (18:55 +0100)]
dwarf2read.c: fix latent buglet
cust->includes is:
struct compunit_symtab
{
...
struct compunit_symtab **includes;
gdb/ChangeLog:
2015-08-03 Pedro Alves <palves@redhat.com>
* dwarf2read.c (compute_compunit_symtab_includes): Use size of struct
compunit_symtab pointer.
Doug Evans [Mon, 3 Aug 2015 16:27:57 +0000 (09:27 -0700)]
Missing changelog entry for previous commit: Add gmonster-{1,2} perf testcases.
These testcases are mocks of real programs.
GDB doesn't care what the programs do, they just have to look
and/or behave like the real program.
These testcases exercise gdb when debugging really large programs.
E.g., gmonster-1 has 10,000 CUs, and gmonster-2 has 1000 shared libs
(which is actually a little small, 5000 would be more accurate).
gdb/testsuite/ChangeLog:
* gdb.perf/lib/perftest/utils.py: New file.
* gdb.perf/gm-hello.cc: New file.
* gdb.perf/gm-pervasive-typedef.cc: New file.
* gdb.perf/gm-pervasive-typedef.h: New file.
* gdb.perf/gm-std.cc: New file.
* gdb.perf/gm-std.h: New file.
* gdb.perf/gm-use-cerr.cc: New file.
* gdb.perf/gm-utils.h: New file.
* gdb.perf/gmonster-null-lookup.py: New file.
* gdb.perf/gmonster-pervasive-typedef.py: New file.
* gdb.perf/gmonster-print-cerr.py: New file.
* gdb.perf/gmonster-ptype-string.py: New file.
* gdb.perf/gmonster-runto-main.py: New file.
* gdb.perf/gmonster-select-file.py: New file.
* gdb.perf/gmonster1-null-lookup.exp: New file.
* gdb.perf/gmonster1-pervasive-typedef.exp: New file.
* gdb.perf/gmonster1-print-cerr.exp: New file.
* gdb.perf/gmonster1-ptype-string.exp: New file.
* gdb.perf/gmonster1-runto-main.exp: New file.
* gdb.perf/gmonster1-select-file.exp: New file.
* gdb.perf/gmonster1.cc: New file.
* gdb.perf/gmonster1.exp: New file.
* gdb.perf/gmonster2-null-lookup.exp: New file.
* gdb.perf/gmonster2-pervasive-typedef.exp: New file.
* gdb.perf/gmonster2-print-cerr.exp: New file.
* gdb.perf/gmonster2-ptype-string.exp: New file.
* gdb.perf/gmonster2-runto-main.exp: New file.
* gdb.perf/gmonster2-select-file.exp: New file.
* gdb.perf/gmonster2.cc: New file.
* gdb.perf/gmonster2.exp: New file.
Doug Evans [Mon, 3 Aug 2015 16:23:41 +0000 (09:23 -0700)]
Fix file paths in earlier entry.
Doug Evans [Mon, 3 Aug 2015 16:21:09 +0000 (09:21 -0700)]
gdb.perf/single-step.exp (SINGLE_STEP_COUNT): Change to 1000 from 10000.
single-step.exp takes a while to run, and while that's not necessarily
bad, here it's because the default value of SINGLE_STEP_COUNT is 10,000.
We're not going to gain any more insight into perf issues
single-stepping (stepi) 10,000 times over 1,000 times,
so this patch changes the default to 1,000.
gdb/testsuite/ChangeLog:
* gdb.perf/single-step.exp (SINGLE_STEP_COUNT): Change to 1000 from
10000.
Doug Evans [Mon, 3 Aug 2015 16:17:40 +0000 (09:17 -0700)]
Add parallel build support for perf tests.
gdb/testsuite/ChangeLog:
* Makefile.in (workers/%.worker, build-perf): New rule.
(GDB_PERFTEST_MODE): New variable.
(check-perf): Use it.
(clean): Clean up gdb.perf parallel build subdirs.
* lib/build-piece.exp: New file.
* lib/gdb.exp (make_gdb_parallel_path): New function
(standard_output_file, standard_temp_file): Call it.
(GDB_PARALLEL handling): Make outputs,temp,cache directories as subdirs
of $GDB_PARALLEL.
* lib/cache.exp (gdb_do_cache): Call make_gdb_parallel_path.
Doug Evans [Mon, 3 Aug 2015 16:04:03 +0000 (09:04 -0700)]
Move basic perf-test output from perftest.log to perftest.sum.
This patch does two things.
1) Add support for multiple data points.
2) Move the "report" output from perftest.log to perftest.sum.
I want to record the raw data somewhere, and a bit of statistical analysis
(standard deviation left for another day), but I also don't want
it to clutter up the basic report.
This patch takes a cue from gdb.{sum,log} and does the same thing
with perftest.{sum,log}.
Ultimately, we'll probably want to emit raw data to csv files or some
such and then do post-processing passes on that.
gdb/testsuite/ChangeLog:
* lib/perftest/reporter.py (SUM_FILE_NAME): New global.
(LOG_FILE_NAME): New global.
(TextReporter.__init__): Initialize self.txt_sum.
(TextReporter.report): Add support for multiple data-points.
Move report to perftest.sum, put raw data in perftest.log.
(TextReporter.start): Open sum and log files.
(TextReporter.end): Close sum and log files.
* lib/perftest/testresult.py (SingleStatisticTestResult.record): Handle
multiple data-points.
Ulrich Weigand [Mon, 3 Aug 2015 12:35:58 +0000 (14:35 +0200)]
Fix build error due to uninitialized variable warning
As of commit
a5fdf78a4402341a0ae23a5ca8a63825e2b5286c, building GDB with
a GCC 4.1 host compiler fails with:
gdb/cp-namespace.c: In function 'cp_lookup_symbol_via_imports':
gdb/cp-namespace.c:482: warning: 'sym.block' may be used uninitialized in this function
Apparently, more recent compilers are able to deduce that no actual
uninitialized use of sym.block takes place, but GCC 4.1 isn't yet
able to do that.
Fixed by adding an explicit initalization.
gdb/
* cp-namespace.c (cp_lookup_symbol_via_imports): Fix uninitialized
variable warning with some compilers.
Yao Qi [Mon, 3 Aug 2015 09:37:23 +0000 (10:37 +0100)]
Enum fix for arm-linux-nat.c
This patch fixes GDB build breakage on arm-linux.
gdb:
2015-08-03 Yao Qi <yao.qi@linaro.org>
* arm-linux-nat.c (arm_linux_get_hwbp_type): Capitalize "type"
in comment. Replace "rw" with "type".
(arm_linux_remove_watchpoint): Change type of "rw" to
"enum target_hw_bp_type".
Nick Clifton [Mon, 3 Aug 2015 08:19:00 +0000 (09:19 +0100)]
Fix thinkos in the description of the --hash-size command line option for GAS.
* doc/as.texinfo (Overview): Add --hash-size to the synopsis and
fix typo in its entry: @kindex -> @item.
Pierre-Marie de Rodat [Mon, 3 Aug 2015 07:39:42 +0000 (09:39 +0200)]
Fix the block_found refactoring ChangeLog entry
Replace the old "struct symbol_in_block" with the actual "struct
block_symbol", fix a typo and remove mention to an unmodified function.
GDB Administrator [Mon, 3 Aug 2015 00:00:08 +0000 (00:00 +0000)]
Automatic date update in version.in
Pedro Alves [Sun, 2 Aug 2015 18:46:50 +0000 (11:46 -0700)]
Unbreak PPC gdb builds
Commit
f486487f5586 (Mostly trivial enum fixes) missed updating
ppc-linux-nat.c, resulting in:
../../src/gdb/ppc-linux-nat.c: In function ‘_initialize_ppc_linux_nat’:
../../src/gdb/ppc-linux-nat.c:2503:27: error: assignment from incompatible pointer type [-Werror]
../../src/gdb/ppc-linux-nat.c:2504:27: error: assignment from incompatible pointer type [-Werror]
gdb/ChangeLog
2015-08-02 Pedro Alves <palves@redhat.com>
* ppc-linux-nat.c (get_trigger_type, create_watchpoint_request)
(ppc_linux_insert_watchpoint, ppc_linux_remove_watchpoint): Change
parameter 'rw's type to enum target_hw_bp_type and rename to
'type'.
Pierre-Marie de Rodat [Sat, 1 Aug 2015 09:25:44 +0000 (11:25 +0200)]
Complete the previous commit (block_found refactoring)
The previous commit (Replace the block_found global with explicit
data-flow) lacks updates in a couple of files because it was not
tested building GDB with --enable-targets=all... but buildbots did.
This adds the appropriate simple updates to fix the build.
gdb/ChangeLog:
* alpha-mdebug-tdep.c (find_proc_desc): Update call to
lookup_symbol.
* ft32-tdep.c (ft32_skip_prologue): Likewise.
* moxie-tdep.c (moxie_skip_prologue): Likewise.
* mt-tdep.c (mt_skip_prologue): Likewise.
* xstormy16-tdep.c (xstormy16_skip_prologue): Likewise.
GDB Administrator [Sun, 2 Aug 2015 00:00:08 +0000 (00:00 +0000)]
Automatic date update in version.in
Pierre-Marie de Rodat [Tue, 21 Jul 2015 15:02:15 +0000 (17:02 +0200)]
Replace the block_found global with explicit data-flow
As Pedro suggested on gdb-patches@ (see
https://sourceware.org/ml/gdb-patches/2015-05/msg00714.html), this
change makes symbol lookup functions return a structure that includes
both the symbol found and the block in which it was found. This makes
it possible to get rid of the block_found global variable and thus makes
block hunting explicit.
gdb/
* ada-exp.y (write_object_renaming): Replace struct
ada_symbol_info with struct block_symbol. Update field
references accordingly.
(block_lookup, select_possible_type_sym): Likewise.
(find_primitive_type): Likewise. Also update call to
ada_lookup_symbol to extract the symbol itself.
(write_var_or_type, write_name_assoc): Likewise.
* ada-lang.h (struct ada_symbol_info): Remove.
(ada_lookup_symbol_list): Replace struct ada_symbol_info with
struct block_symbol.
(ada_lookup_encoded_symbol, user_select_syms): Likewise.
(ada_lookup_symbol): Return struct block_symbol instead of a
mere symbol.
* ada-lang.c (defns_collected): Replace struct ada_symbol_info
with struct block_symbol.
(resolve_subexp, ada_resolve_function, sort_choices,
user_select_syms, is_nonfunction, add_defn_to_vec,
num_defns_collected, defns_collected,
symbols_are_identical_enums, remove_extra_symbols,
remove_irrelevant_renamings, add_lookup_symbol_list_worker,
ada_lookup_symbol_list, ada_iterate_over_symbols,
ada_lookup_encoded_symbol, get_var_value): Likewise.
(ada_lookup_symbol): Return a block_symbol instead of a mere
symbol. Replace struct ada_symbol_info with struct
block_symbol.
(ada_lookup_symbol_nonlocal): Likewise.
(standard_lookup): Make block passing explicit through
lookup_symbol_in_language.
* ada-tasks.c (get_tcb_types_info): Update the calls to
lookup_symbol_in_language to extract the mere symbol out of the
returned value.
(ada_tasks_inferior_data_sniffer): Likewise.
* ax-gdb.c (gen_static_field): Likewise for the call to
lookup_symbol.
(gen_maybe_namespace_elt): Deal with struct symbol_in_block from
lookup functions.
(gen_expr): Likewise.
* c-exp.y: Likewise. Remove uses of block_found.
(lex_one_token, classify_inner_name, c_print_token): Likewise.
(classify_name): Likewise. Rename the "sym" local variable to
"bsym".
* c-valprint.c (print_unpacked_pointer): Likewise.
* compile/compile-c-symbols.c (convert_symbol_sym): Promote the
"sym" parameter from struct symbol * to struct block_symbol.
Use it to remove uses of block_found. Deal with struct
symbol_in_block from lookup functions.
(gcc_convert_symbol): Likewise. Update the call to
convert_symbol_sym.
* compile/compile-object-load.c (compile_object_load): Deal with
struct symbol_in_block from lookup functions.
* cp-namespace.c (cp_lookup_nested_symbol_1,
cp_lookup_nested_symbol, cp_lookup_bare_symbol,
cp_search_static_and_baseclasses,
cp_lookup_symbol_in_namespace, cp_lookup_symbol_via_imports,
cp_lookup_symbol_imports_or_template,
cp_lookup_symbol_via_all_imports, cp_lookup_symbol_namespace,
lookup_namespace_scope, cp_lookup_nonlocal,
find_symbol_in_baseclass): Return struct symbol_in_block instead
of mere symbols and deal with struct symbol_in_block from lookup
functions.
* cp-support.c (inspect_type, replace_typedefs,
cp_lookup_rtti_type): Deal with struct symbol_in_block from
lookup functions.
* cp-support.h (cp_lookup_symbol_nonlocal,
cp_lookup_symbol_from_namespace,
cp_lookup_symbol_imports_or_template, cp_lookup_nested_symbol):
Return struct symbol_in_block instead of mere symbols.
* d-exp.y (d_type_from_name, d_module_from_name, push_variable,
push_module_name):
Deal with struct symbol_in_block from lookup functions. Remove
uses of block_found.
* eval.c (evaluate_subexp_standard): Update call to
cp_lookup_symbol_namespace.
* f-exp.y: Deal with struct symbol_in_block from lookup
functions. Remove uses of block_found.
(yylex): Likewise.
* gdbtypes.c (lookup_typename, lookup_struct, lookup_union,
lookup_enum, lookup_template_type, check_typedef): Deal with
struct symbol_in_block from lookup functions.
* guile/scm-frame.c (gdbscm_frame_read_var): Likewise.
* guile/scm-symbol.c (gdbscm_lookup_symbol): Likewise.
(gdbscm_lookup_global_symbol): Likewise.
* gnu-v3-abi.c (gnuv3_get_typeid_type): Likewise.
* go-exp.y: Likewise. Remove uses of block_found.
(package_name_p, classify_packaged_name, classify_name):
Likewise.
* infrun.c (insert_exception_resume_breakpoint): Likewise.
* jv-exp.y (push_variable): Likewise.
* jv-lang.c (java_lookup_class, get_java_object_type): Likewise.
* language.c (language_bool_type): Likewise.
* language.h (struct language_defn): Update
la_lookup_symbol_nonlocal to return a struct symbol_in_block
rather than a mere symbol.
* linespec.c (find_label_symbols): Deal with struct
symbol_in_block from lookup functions.
* m2-exp.y: Likewise. Remove uses of block_found.
(yylex): Likewise.
* mi/mi-cmd-stack.c (list_args_or_locals): Likewise.
* objc-lang.c (lookup_struct_typedef, find_imps): Likewise.
* p-exp.y: Likewise. Remove uses of block_found.
(yylex): Likewise.
* p-valprint.c (pascal_val_print): Likewise.
* parse.c (write_dollar_variable): Likewise. Remove uses of
block_found.
* parser-defs.h (struct symtoken): Turn the SYM field into a
struct symbol_in_block.
* printcmd.c (address_info): Deal with struct symbol_in_block
from lookup functions.
* python/py-frame.c (frapy_read_var): Likewise.
* python/py-symbol.c (gdbpy_lookup_symbol,
gdbpy_lookup_global_symbol): Likewise.
* skip.c (skip_function_command): Likewise.
* solib-darwin.c (darwin_lookup_lib_symbol): Return a struct
symbol_in_block instead of a mere symbol.
* solib-spu.c (spu_lookup_lib_symbol): Likewise.
* solib-svr4.c (elf_lookup_lib_symbol): Likewise.
* solib.c (solib_global_lookup): Likewise.
* solist.h (solib_global_lookup): Likewise.
(struct target_so_ops): Update lookup_lib_global_symbol to
return a struct symbol_in_block rather than a mere symbol.
* source.c (select_source_symtab): Deal with struct
symbol_in_block from lookup functions.
* stack.c (print_frame_args, iterate_over_block_arg_vars):
Likewise.
* symfile.c (set_initial_language): Likewise.
* symtab.c (SYMBOL_LOOKUP_FAILED): Turn into a struct
symbol_in_block.
(SYMBOL_LOOKUP_FAILED_P): New predicate as a macro.
(struct symbol_cache_slot): Turn the FOUND field into a struct
symbol_in_block.
(block_found): Remove.
(eq_symbol_entry): Update to deal with struct symbol_in_block in
cache slots.
(symbol_cache_lookup): Return a struct symbol_in_block rather
than a mere symbol.
(symbol_cache_mark_found): Add a BLOCK parameter to fill
appropriately the cache slots. Update callers.
(symbol_cache_dump): Update cache slots handling to the type
change.
(lookup_symbol_in_language, lookup_symbol, lookup_language_this,
lookup_symbol_aux, lookup_local_symbol,
lookup_symbol_in_objfile, lookup_global_symbol_from_objfile,
lookup_symbol_in_objfile_symtabs,
lookup_symbol_in_objfile_from_linkage_name,
lookup_symbol_via_quick_fns, basic_lookup_symbol_nonlocal,
lookup_symbol_in_static_block, lookup_static_symbol,
lookup_global_symbol):
Return a struct symbol_in_block rather than a mere symbol. Deal
with struct symbol_in_block from other lookup functions. Remove
uses of block_found.
(lookup_symbol_in_block): Remove uses of block_found.
(struct global_sym_lookup_data): Turn the RESULT field into a
struct symbol_in_block.
(lookup_symbol_global_iterator_cb): Update references to the
RESULT field.
(search_symbols): Deal with struct symbol_in_block from lookup
functions.
* symtab.h (struct symbol_in_block): New structure.
(block_found): Remove.
(lookup_symbol_in_language, lookup_symbol,
basic_lookup_symbol_nonlocal, lookup_symbol_in_static_block,
looku_static_symbol, lookup_global_symbol,
lookup_symbol_in_block, lookup_language_this,
lookup_global_symbol_from_objfile): Return a struct
symbol_in_block rather than just a mere symbol. Update comments
to remove mentions of block_found.
* valops.c (find_function_in_inferior,
value_struct_elt_for_reference, value_maybe_namespace_elt,
value_of_this): Deal with struct symbol_in_block from lookup
functions.
* value.c (value_static_field, value_fn_field): Likewise.
GDB Administrator [Sat, 1 Aug 2015 00:00:08 +0000 (00:00 +0000)]
Automatic date update in version.in
Pedro Alves [Fri, 31 Jul 2015 19:06:24 +0000 (20:06 +0100)]
testsuite: tcl exec& -> 'kill -9 $pid' is racy (attach-many-short-lived-thread.exp races and others)
The buildbots show that attach-many-short-lived-thread.exp is racy.
But after staring at debug logs and playing with SystemTap scripts for
a (long) while, I figured out that neither GDB, nor the kernel nor the
test's program itself are at fault.
The problem is simply that the testsuite machinery is currently
subject to PID-reuse races. The attach-many-short-lived-threads.c
test program just happens to be much more susceptible to trigger this
race because threads and processes share the same number space on
Linux, and the test spawns many many short lived threads in
succession, thus enlarging the race window a lot.
Part of the problem is that several tests spawn processes with "exec&"
(in order to test the "attach" command) , and then at the end of the
test, to make sure things are cleaned up, issue a 'remote_spawn "kill
-p $testpid"'. Since with tcl's "exec&", tcl itself is responsible
for reaping the process's exit status, when we go kill the process,
testpid may have already exited _and_ its status may have (and often
has) been reaped already. Thus it can happen that another process
meanwhile reuses $testpid, and that "kill" command kills the wrong
process... Frequently, that happens to be
attach-many-short-lived-thread, but this explains other test's races
as well.
In the attach-many-short-lived-threads test, it sometimes manifests
like this:
(gdb) file /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.threads/attach-many-short-lived-threads
Reading symbols from /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.threads/attach-many-short-lived-threads...done.
(gdb) Loaded /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.threads/attach-many-short-lived-threads into /home/pedro/gdb/mygit/build/gdb/testsuite/../../gdb/gdb
attach 5940
Attaching to program: /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.threads/attach-many-short-lived-threads, process 5940
warning: process 5940 is a zombie - the process has already terminated
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
ptrace: Operation not permitted.
(gdb) PASS: gdb.threads/attach-many-short-lived-threads.exp: iter 1: attach
info threads
No threads.
(gdb) PASS: gdb.threads/attach-many-short-lived-threads.exp: iter 1: no new threads
set breakpoint always-inserted on
(gdb) PASS: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted on
Other times the process dies while the test is ongoing (the process is
ptrace-stopped):
(gdb) print again = 1
Cannot access memory at address 0x6020cc
(gdb) FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
(Recall that on Linux, SIGKILL is not interceptable)
And other times it dies just while we're detaching:
$4 = 319
(gdb) PASS: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left
detach
Can't detach Thread 0x7fb13b7de700 (LWP 1842): No such process
(gdb) FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach
GDB mishandles the latter (it should ignore ESRCH while detaching just
like when continuing), but that's another story.
The fix here is to change spawn_wait_for_attach to use Expect's
'spawn' command instead of Tcl's 'exec&' to spawn programs, because
with spawn we control when to wait for/reap the process. That allows
killing the process by PID without being subject to pid-reuse races,
because even if the process is already dead, the kernel won't reuse
the process's PID until the zombie is reaped.
The other part of the problem lies in DejaGnu itself, unfortunately.
I have occasionally seen tests (attach-many-short-lived-threads
included, but not only that one) die with a random inexplicable
SIGTERM too, and that too is caused by the same reason, except that in
that case, the rogue SIGTERM is sent from this bit in DejaGnu's remote.exp:
exec sh -c "exec > /dev/null 2>&1 && (kill -2 $pgid || kill -2 $pid) && sleep 5 && (kill $pgid || kill $pid) && sleep 5 && (kill -9 $pgid || kill -9 $pid) &"
...
catch "wait -i $shell_id"
Even if the program exits promptly, that whole cascade of kills
carries on in the background, thus potentially killing the poor
process that manages to reuse $pid...
I sent a fix for that to the DejaGnu list:
http://lists.gnu.org/archive/html/dejagnu/2015-07/msg00000.html
With both patches in place, I haven't seen
attach-many-short-lived-threads.exp fail again.
Tested on x86_64 Fedora 20, native, gdbserver and extended-gdbserver.
gdb/testsuite/ChangeLog:
2015-07-31 Pedro Alves <palves@redhat.com>
* gdb.base/attach-pie-misread.exp: Rename $res to $test_spawn_id.
Use spawn_id_get_pid. Wait for spawn id after eof. Use
kill_wait_spawned_process instead of explicit "kill -9".
* gdb.base/attach-pie-noexec.exp: Adjust to spawn_wait_for_attach
returning a spawn id instead of a pid. Use spawn_id_get_pid and
kill_wait_spawned_process.
* gdb.base/attach-twice.exp: Likewise.
* gdb.base/attach.exp: Likewise.
(do_command_attach_tests): Use gdb_spawn_with_cmdline_opts and
gdb_test_multiple.
* gdb.base/solib-overlap.exp: Adjust to spawn_wait_for_attach
returning a spawn id instead of a pid. Use spawn_id_get_pid and
kill_wait_spawned_process.
* gdb.base/valgrind-infcall.exp: Likewise.
* gdb.multi/multi-attach.exp: Likewise.
* gdb.python/py-prompt.exp: Likewise.
* gdb.python/py-sync-interp.exp: Likewise.
* gdb.server/ext-attach.exp: Likewise.
* gdb.threads/attach-into-signal.exp (corefunc): Use
spawn_wait_for_attach, spawn_id_get_pid and
kill_wait_spawned_process.
* gdb.threads/attach-many-short-lived-threads.exp: Adjust to
spawn_wait_for_attach returning a spawn id instead of a pid. Use
spawn_id_get_pid and kill_wait_spawned_process.
* gdb.threads/attach-stopped.exp (corefunc): Use
spawn_wait_for_attach, spawn_id_get_pid and
kill_wait_spawned_process.
* gdb.base/break-interp.exp: Rename $res to $test_spawn_id.
Use spawn_id_get_pid. Wait for spawn id after eof. Use
kill_wait_spawned_process instead of explicit "kill -9".
* lib/gdb.exp (can_spawn_for_attach): Adjust comment.
(kill_wait_spawned_process, spawn_id_get_pid): New procedures.
(spawn_wait_for_attach): Use spawn instead of exec to spawn
processes. Don't map cygwin/windows pids here. Now returns a
spawn id list.
Simon Marchi [Fri, 31 Jul 2015 18:08:14 +0000 (14:08 -0400)]
Fix m32r_remove_watchpoint parameter type
This change should have been in the previous patch (Mostly trivial enum
fixes).
gdb/ChangeLog:
* remote-m32r-sdi.c (m32r_remove_watchpoint): Use enum type
instead of integer.
Simon Marchi [Fri, 31 Jul 2015 17:19:53 +0000 (13:19 -0400)]
Mostly trivial enum fixes
This is a patch I extracted from Pedro's C++ branch. It contains the
most trivial enum fixes, where an integer type/value was used instead
of the appropriate enum type/value. It fixes many C++ errors, since
in C++ you can't mix integers and enums implicitely.
Regardless of the C++ conversion, I think this is a good cleanup to make
use of the appropriate enum types.
Regression-tested on native x86_64.
gdb/ChangeLog:
* aarch64-linux-nat.c (aarch64_linux_can_use_hw_breakpoint): Use enum
type or value instead of integer.
(aarch64_linux_insert_watchpoint): Likewise.
(aarch64_linux_remove_watchpoint): Likewise.
* ada-lang.c (ada_op_print_tab): Likewise.
* amd64-linux-tdep.c (amd64_canonicalize_syscall): Likewise.
(amd64_linux_syscall_record_common): Likewise.
* arch-utils.c (target_byte_order_user): Likewise.
(default_byte_order): Likewise.
* arm-linux-nat.c (arm_linux_can_use_hw_breakpoint): Likewise.
(arm_linux_get_hwbp_type): Likewise.
(arm_linux_hw_watchpoint_initialize): Likewise.
(arm_linux_insert_watchpoint): Likewise.
* arm-linux-tdep.c (arm_canonicalize_syscall): Likewise.
(arm_linux_syscall_record): Likewise.
* breakpoint.c (update_watchpoint): Likewise.
(breakpoint_here_p): Likewise.
(bpstat_print): Likewise.
(enable_breakpoint_disp): Likewise.
* c-lang.c (c_op_print_tab): Likewise.
* cli/cli-decode.c (add_info_alias): Likewise.
* d-lang.c (d_op_print_tab): Likewise.
* eval.c (evaluate_subexp_standard): Likewise.
* f-exp.y (dot_ops): Likewise.
(f77_keywords): Likewise.
* f-lang.c (f_op_print_tab): Likewise.
* go-lang.c (go_op_print_tab): Likewise.
* guile/scm-breakpoint.c (gdbscm_make_breakpoint): Likewise.
* guile/scm-cmd.c (gdbscm_make_command): Likewise.
* guile/scm-param.c (gdbscm_make_parameter): Likewise.
* guile/scm-pretty-print.c (gdbscm_apply_val_pretty_printer): Likewise.
* guile/scm-string.c (struct scm_to_stringn_data): Likewise.
(struct scm_from_stringn_data): Likewise.
* i386-linux-tdep.c (i386_canonicalize_syscall): Likewise.
* ia64-linux-nat.c (ia64_linux_insert_watchpoint): Likewise.
(ia64_linux_remove_watchpoint): Likewise.
(ia64_linux_can_use_hw_breakpoint): Likewise.
* infrun.c (print_stop_event): Likewise.
* jv-lang.c (java_op_print_tab): Likewise.
* linux-nat.c (linux_proc_xfer_partial): Likewise.
* linux-nat.h (struct lwp_info): Likewise.
* linux-thread-db.c (enable_thread_event): Likewise.
* m2-lang.c (m2_op_print_tab): Likewise.
* mi/mi-cmd-stack.c (mi_cmd_stack_list_locals): Likewise.
(mi_cmd_stack_list_variables): Likewise.
* mi/mi-main.c (mi_cmd_trace_frame_collected): Likewise.
* mi/mi-out.c (mi_table_begin): Likewise.
(mi_table_header): Likewise.
* mips-linux-nat.c (mips_linux_can_use_hw_breakpoint): Likewise.
(mips_linux_insert_watchpoint): Likewise.
(mips_linux_remove_watchpoint): Likewise.
* nat/mips-linux-watch.c (mips_linux_watch_type_to_irw): Likewise.
* nat/mips-linux-watch.h (struct mips_watchpoint): Likewise.
(mips_linux_watch_type_to_irw): Likewise.
* nto-procfs.c (procfs_can_use_hw_breakpoint): Likewise.
(procfs_insert_hw_watchpoint): Likewise.
(procfs_remove_hw_watchpoint): Likewise.
(procfs_hw_watchpoint): Likewise.
(procfs_can_use_hw_breakpoint): Likewise.
(procfs_remove_hw_watchpoint): Likewise.
(procfs_insert_hw_watchpoint): Likewise.
* p-lang.c (pascal_op_print_tab): Likewise.
* ppc-linux-nat.c (ppc_linux_can_use_hw_breakpoint): Likewise.
* ppc-linux-tdep.c (ppu2spu_unwind_register): Likewise.
* ppc-sysv-tdep.c (get_decimal_float_return_value): Likewise.
* procfs.c (procfs_can_use_hw_breakpoint): Likewise.
(procfs_insert_watchpoint): Likewise.
(procfs_remove_watchpoint): Likewise.
* psymtab.c (recursively_search_psymtabs): Likewise.
* remote-m32r-sdi.c (m32r_can_use_hw_watchpoint): Likewise.
(m32r_insert_watchpoint): Likewise.
* remote-mips.c (mips_can_use_watchpoint): Likewise.
(mips_insert_watchpoint): Likewise.
(mips_remove_watchpoint): Likewise.
* remote.c (watchpoint_to_Z_packet): Likewise.
(remote_insert_watchpoint): Likewise.
(remote_remove_watchpoint): Likewise.
(remote_check_watch_resources): Likewise.
* s390-linux-nat.c (s390_insert_watchpoint): Likewise.
(s390_remove_watchpoint): Likewise.
(s390_can_use_hw_breakpoint): Likewise.
* s390-linux-tdep.c (s390_gdbarch_init): Likewise.
* spu-linux-nat.c (spu_can_use_hw_breakpoint): Likewise.
* target.h (struct target_ops): Likewise.
* tilegx-tdep.c (tilegx_analyze_prologue): Likewise.
* ui-out.c (struct ui_out_hdr): Likewise.
(append_header_to_list): Likewise.
(get_next_header): Likewise.
(verify_field): Likewise.
(ui_out_begin): Likewise.
(ui_out_field_int): Likewise.
(ui_out_field_fmt_int): Likewise.
(ui_out_field_skip): Likewise.
(ui_out_field_string): Likewise.
(ui_out_field_fmt): Likewise.
* varobj.c (new_variable): Likewise.
* x86-nat.c (x86_insert_watchpoint): Likewise.
(x86_remove_watchpoint): Likewise.
(x86_can_use_hw_breakpoint): Likewise.
* xtensa-tdep.h (struct gdbarch_tdep): Likewise.
* inflow.c (enum gdb_has_a_terminal_flag_enum): Add name to
previously anonymous enumeration type..
* linux-record.h (enum gdb_syscall): Add gdb_sys_no_syscall
value.
* target-debug.h (target_debug_print_enum_target_hw_bp_type): New.
(target_debug_print_enum_bptype): New.
* target-delegates.c: Regenerate.
GDB Administrator [Fri, 31 Jul 2015 00:00:08 +0000 (00:00 +0000)]
Automatic date update in version.in
Sandra Loosemore [Thu, 30 Jul 2015 21:20:01 +0000 (14:20 -0700)]
Replace incorrect patch to gdb.cp/var-tag.exp.
2015-07-30 Sandra Loosemore <sandra@codesourcery.com>
gdb/testsuite/
* gdb.cp/var-tag.exp (do_global_tests): Revert broken commit
4bc4d42859e3b42c79c89295ef39944bdb3e6753 and apply the
correct patch.
Sandra Loosemore [Thu, 30 Jul 2015 20:26:03 +0000 (13:26 -0700)]
Don't allow non-stack memory writes in the prologue for nios2.
2015-07-30 Sandra Loosemore <sandra@codesourcery.com>
gdb/
* nios2-tdep.c (nios2_analyze_prologue): Do what the comment
already says and disallow non-stack memory writes in the prologue.
Sandra Loosemore [Thu, 30 Jul 2015 20:23:43 +0000 (13:23 -0700)]
Update trap/break handling in nios2 prologue analyzer.
2015-07-30 Sandra Loosemore <sandra@codesourcery.com>
gdb/
* nios2-tdep.c (nios2_analyze_prologue): Update comments to
reflect how current GCC emits stack overflow checks. Match
both trap and break instructions for backward compatibility.
Disallow other trap and break instructions in the prologue.
Sandra Loosemore [Thu, 30 Jul 2015 19:06:29 +0000 (12:06 -0700)]
Restrict gdb.arch/ppc64-symtab-cordic.exp to ppc64 targets.
2015-07-30 Sandra Loosemore <sandra@codesourcery.com>
gdb/testsuite/
* gdb.arch/ppc64-symtab-cordic.exp: Restrict to ppc64 targets.
Sandra Loosemore [Thu, 30 Jul 2015 18:52:49 +0000 (11:52 -0700)]
Reapply fix for gdb.cp/var-tag.exp C++ failures.
2015-07-30 Sandra Loosemore <sandra@codesourcery.com>
gdb/testsuite/
Reapply:
2014-05-21 Mark Wielaard <mjw@redhat.com>
* gdb.cp/var-tag.exp (do_global_tests): Handle underlying type.
Pedro Alves [Thu, 30 Jul 2015 17:41:44 +0000 (18:41 +0100)]
remote follow fork and spurious child stops in non-stop mode
Running gdb.threads/fork-plus-threads.exp against gdbserver in
extended-remote mode, even though the test passes, we still see broken
behavior:
(gdb) PASS: gdb.threads/fork-plus-threads.exp: set detach-on-fork off
continue &
Continuing.
(gdb) PASS: gdb.threads/fork-plus-threads.exp: continue &
[New Thread 28092.28092]
[Thread 28092.28092] #2 stopped.
[New Thread 28094.28094]
[Inferior 2 (process 28092) exited normally]
[New Thread 28094.28105]
[New Thread 28094.28109]
...
[Thread 28174.28174] #18 stopped.
[New Thread 28185.28185]
[Inferior 10 (process 28174) exited normally]
[New Thread 28185.28196]
[Thread 28185.28185] #20 stopped.
Cannot remove breakpoints because program is no longer writable.
Further execution is probably impossible.
[Inferior 11 (process 28185) exited normally]
[Inferior 1 (process 28091) exited normally]
PASS: gdb.threads/fork-plus-threads.exp: reached breakpoint
info threads
No threads.
(gdb) PASS: gdb.threads/fork-plus-threads.exp: no threads left
info inferiors
Num Description Executable
* 1 <null> /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.threads/fork-plus-threads
(gdb) PASS: gdb.threads/fork-plus-threads.exp: only inferior 1 left
All the "[Thread FOO] #NN stopped." above are bogus, as well as the
"Cannot remove breakpoints because program is no longer writable.",
which is a consequence.
The problem is that when we intercept a fork event, we should report
the event for the parent, only, and leave the child stopped, but not
report its stop event. GDB later decides whether to follow the parent
or the child. But because handle_extended_wait does not set the
child's last_status.kind to TARGET_WAITKIND_STOPPED, a
stop_all_threads/unstop_all_lwps sequence (e.g., from trying to access
memory) by mistake ends up queueing a SIGSTOP on the child, resuming
it, and then when that SIGSTOP is intercepted, because the LWP has
last_resume_kind set to resume_stop, gdbserver reports the stop to
GDB, as GDB_SIGNAL_0:
...
>>>> entering unstop_all_lwps
unstopping all lwps
proceed_one_lwp: lwp 1600
client wants LWP to remain 1600 stopped
proceed_one_lwp: lwp 1828
Client wants LWP 1828 to stop. Making sure it has a SIGSTOP pending
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Sending sigstop to lwp 1828
pc is 0x3615ebc7cc
Resuming lwp 1828 (continue, signal 0, stop expected)
continue from pc 0x3615ebc7cc
unstop_all_lwps done
sigchld_handler
<<<< exiting unstop_all_lwps
handling possible target event
>>>> entering linux_wait_1
linux_wait_1: [<all threads>]
my_waitpid (-1, 0x40000001)
my_waitpid (-1, 0x1): status(137f), 1828
LWFE: waitpid(-1, ...) returned 1828, ERRNO-OK
LLW: waitpid 1828 received Stopped (signal) (stopped)
pc is 0x3615ebc7cc
Expected stop.
LLW: resume_stop SIGSTOP caught for LWP 1828.1828.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
...
linux_wait_1 ret = LWP 1828.1828, 1, 0
<<<< exiting linux_wait_1
Writing resume reply for LWP 1828.1828:1
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Tested on x86_64 Fedora 20, extended-remote.
gdb/gdbserver/ChangeLog:
2015-07-30 Pedro Alves <palves@redhat.com>
* linux-low.c (handle_extended_wait): Set the child's last
reported status to TARGET_WAITKIND_STOPPED.
Pedro Alves [Wed, 22 Jul 2015 17:01:46 +0000 (18:01 +0100)]
PR threads/18600: Inferiors left around after fork+thread spawn
The new gdb.threads/fork-plus-threads.exp test exposes one more
problem. When one types "info inferiors" after running the program,
one see's a couple inferior left still, while there should only be
inferior #1 left. E.g.:
(gdb) info inferiors
Num Description Executable
4 process 8393 /home/pedro/bugs/src/test
2 process 8388 /home/pedro/bugs/src/test
* 1 <null> /home/pedro/bugs/src/test
(gdb) info threads
Calling prune_inferiors() manually at this point (from a top gdb) does
not remove them, because they still have inf->pid != 0 (while they
shouldn't). This suggests that we never mourned those inferiors.
Enabling logs (master + previous patch) we see:
...
WL: waitpid Thread 0x7ffff7fc2740 (LWP 9513) received Trace/breakpoint trap (stopped)
WL: Handling extended status 0x03057f
LHEW: Got clone event from LWP 9513, new child is LWP 9579
[New Thread 0x7ffff37b8700 (LWP 9579)]
WL: waitpid Thread 0x7ffff7fc2740 (LWP 9508) received 0 (exited)
WL: Thread 0x7ffff7fc2740 (LWP 9508) exited.
^^^^^^^^
[Thread 0x7ffff7fc2740 (LWP 9508) exited]
WL: waitpid Thread 0x7ffff7fc2740 (LWP 9499) received 0 (exited)
WL: Thread 0x7ffff7fc2740 (LWP 9499) exited.
[Thread 0x7ffff7fc2740 (LWP 9499) exited]
RSRL: resuming stopped-resumed LWP Thread 0x7ffff37b8700 (LWP 9579) at 0x3615ef4ce1: step=0
...
(gdb) info inferiors
Num Description Executable
5 process 9508 /home/pedro/bugs/src/test
^^^^
4 process 9503 /home/pedro/bugs/src/test
3 process 9500 /home/pedro/bugs/src/test
2 process 9499 /home/pedro/bugs/src/test
* 1 <null> /home/pedro/bugs/src/test
(gdb)
...
Note the "Thread 0x7ffff7fc2740 (LWP 9508) exited." line.
That's this in wait_lwp:
/* Check if the thread has exited. */
if (WIFEXITED (status) || WIFSIGNALED (status))
{
thread_dead = 1;
if (debug_linux_nat)
fprintf_unfiltered (gdb_stdlog, "WL: %s exited.\n",
target_pid_to_str (lp->ptid));
}
}
That was the leader thread reporting an exit, meaning the whole
process is gone. So the problem is that this code doesn't understand
that an WIFEXITED status of the leader LWP should be reported to
infrun as process exit.
gdb/ChangeLog:
2015-07-30 Pedro Alves <palves@redhat.com>
PR threads/18600
* linux-nat.c (wait_lwp): Report to the core when thread group
leader exits.
gdb/testsuite/ChangeLog:
2015-07-30 Pedro Alves <palves@redhat.com>
PR threads/18600
* gdb.threads/fork-plus-threads.exp: Test that "info inferiors"
only shows inferior 1.
Pedro Alves [Thu, 30 Jul 2015 17:50:29 +0000 (18:50 +0100)]
PR threads/18600: Threads left stopped after fork+thread spawn
When a program forks and another process start threads while gdb is
handling the fork event, newly created threads are left stuck stopped
by gdb, even though gdb presents them as "running", to the user.
This can be seen with the test added by this patch. The test has the
inferior fork a certain number of times and waits for all children to
exit. Each fork child spawns a number of threads that do nothing and
joins them immediately. Normally, the program should run unimpeded
(from the point of view of the user) and exit very quickly. Without
this fix, it doesn't because of some threads left stopped by gdb, so
inferior 1 never exits.
The program triggers when a new clone thread is found while inside the
linux_stop_and_wait_all_lwps call in linux-thread-db.c:
linux_stop_and_wait_all_lwps ();
ALL_LWPS (lp)
if (ptid_get_pid (lp->ptid) == pid)
thread_from_lwp (lp->ptid);
linux_unstop_all_lwps ();
Within linux_stop_and_wait_all_lwps, we reach
linux_handle_extended_wait with the "stopping" parameter set to 1, and
because of that we don't mark the new lwp as resumed. As consequence,
the subsequent resume_stopped_resumed_lwps, called from
linux_unstop_all_lwps, never resumes the new LWP.
There's lots of cruft in linux_handle_extended_wait that no longer
makes sense. On systems with CLONE events support, we don't rely on
libthread_db for thread listing anymore, so the code that preserves
stop_requested and the handling of last_resume_kind is all dead.
So the fix is to remove all that, and simply always mark the new LWP
as resumed, so that resume_stopped_resumed_lwps re-resumes it.
gdb/ChangeLog:
2015-07-30 Pedro Alves <palves@redhat.com>
Simon Marchi <simon.marchi@ericsson.com>
PR threads/18600
* linux-nat.c (linux_handle_extended_wait): On CLONE event, always
mark the new thread as resumed. Remove STOPPING parameter.
(wait_lwp): Adjust call to linux_handle_extended_wait.
(linux_nat_filter_event): Adjust call to
linux_handle_extended_wait.
(resume_stopped_resumed_lwps): Add debug output.
gdb/testsuite/ChangeLog:
2015-07-30 Simon Marchi <simon.marchi@ericsson.com>
Pedro Alves <palves@redhat.com>
PR threads/18600
* gdb.threads/fork-plus-threads.c: New file.
* gdb.threads/fork-plus-threads.exp: New file.
Pierre Langlois [Thu, 30 Jul 2015 17:05:00 +0000 (18:05 +0100)]
Remove isize output argument from fast_tracepoint_valid_at
This patch removes the isize output argument from the
fast_tracepoint_valid_at gdbarch hook. It was used to return the size
of the instruction that needs to be replaced when installing a fast
tracepoint. Instead of getting this value from the
fast_tracepoint_valid_at hook, we can call the gdb_insn_length function.
If we do not do this, then architectures which do not have a restriction
on where to install the fast tracepoint will send uninitialized memory
off to GDBserver. See remote_download_tracepoint:
~~~
int isize;
if (gdbarch_fast_tracepoint_valid_at (target_gdbarch (),
tpaddr, &isize, NULL))
xsnprintf (buf + strlen (buf), BUF_SIZE - strlen (buf), ":F%x",
isize);
~~~
The default implementation of fast_tracepoint_valid_at will not set
isize resulting in uninitialized memory being sent. Later on, GDBserver
could use this information to compute a jump offset.
gdb/ChangeLog:
* arch-utils.c (default_fast_tracepoint_valid_at): Remove unused
isize argument.
* arch-utils.h (default_fast_tracepoint_valid_at): Likewise.
* breakpoint.c (check_fast_tracepoint_sals): Adjust call to
gdbarch_fast_tracepoint_valid_at.
* gdbarch.sh (fast_tracepoint_valid_at): Remove isize argument.
* gdbarch.h: Regenerate.
* gdbarch.c: Regenerate.
* i386-tdep.c (i386_fast_tracepoint_valid_at): Remove isize
argument. Do not set it.
* remote.c (remote_download_tracepoint): Adjust call to
gdbarch_fast_tracepoint_valid_at. Call gdb_insn_length to get
the instruction length.
Yao Qi [Thu, 30 Jul 2015 14:07:39 +0000 (15:07 +0100)]
Remove global variable arm_hwcap
After previous patch, we don't need global variable arm_hwcap. This
patch is to remove it.
gdb/gdbserver:
2015-07-30 Yao Qi <yao.qi@linaro.org>
* linux-arm-low.c (arm_hwcap): Remove it.
(arm_read_description): New local variable arm_hwcap. Don't
set arm_hwcap to zero.
Yao Qi [Thu, 30 Jul 2015 14:07:39 +0000 (15:07 +0100)]
Use regcache->tdesc instead of arm_hwcap
arm_hwcap is a global variable, and we should avoid using it as much
as we can. Instead of checking arm_hwcap, we can check whether
regcache->tdesc is a certain kind of target description. This is
what this patch does.
gdb/gdbserver:
2015-07-30 Yao Qi <yao.qi@linaro.org>
* linux-arm-low.c (arm_fill_wmmxregset): Don't use arm_hwcap.
Use regcache->tdesc instead.
(arm_store_wmmxregset): Likewise.
(arm_fill_vfpregset): Likewise.
(arm_store_vfpregset): Likewise.
Yao Qi [Thu, 30 Jul 2015 14:07:38 +0000 (15:07 +0100)]
Don't use arm_regmap and arm_num_regs in arm_fill_gregset and arm_store_gregset
In order to align with arm-linux-nat.c counterparts, we don't use
arm_num_regs and arm_regmap in functions arm_fill_gregset and
arm_store_gregset. Instead, we use register numbers. With this
patch applied, arm_fill_gregset and arm_store_gregset don't need
arm_num_regs and arm_regmap, and they will be moved to a separate
file shared for both arm and aarch64 in the following patch.
gdb/gdbserver:
2015-07-30 Yao Qi <yao.qi@linaro.org>
* linux-arm-low.c: Include arch/arm.h.
(arm_fill_gregset): Don't use arm_num_regs and arm_regmap.
(arm_store_gregset): Likewise.
Yao Qi [Thu, 30 Jul 2015 14:07:38 +0000 (15:07 +0100)]
Move ARM register numbers enum to arch/arm.h
This patch moves ARM register numbers enum to arch/arm.h, so that it
can used by GDBserver too.
This patch also creates a new directory gdb/arch in which arch-specific
or target-specific files are placed.
gdb:
2015-07-30 Yao Qi <yao.qi@linaro.org>
* arm-tdep.h (enum gdb_regnum): Move it to ...
* arch/arm.h: ... here. New file.
* Makefile.in (HFILES_NO_SRCDIR): Add arch/arm.h.
Pierre Langlois [Thu, 30 Jul 2015 11:40:49 +0000 (12:40 +0100)]
[AArch64] Rename boolean arguments in decoding functions
This patch cleans up the decoding functions using booleans when they can
decode two instructions. The boolean argument is used to know which of
the two instructions was decoded.
The instructions affected are BR/BLR, B/BL, CBZ/CBNZ and TBZ/TBNZ.
These arguments would be named after a named bit in the instruction
encoding, this patch renames them to 'is_XXX'. Furthermore, the
'unsigned' type would be used to describe a boolean while
aarch64_decode_cb would use 'int' (see the 'is64' argument). This patch
makes all booleans be 'int' and decoded bitfields be 'unsigned'.
gdb/ChangeLog:
* aarch64-tdep.c (decode_b): Rename link argument to is_bl.
Change its type to int *.
(decode_br): Rename link argument to is_blr. Change its type to
int *.
(decode_cb): Rename op argument to is_cbnz. Change its type to
int *.
(decode_tb): Rename op argument to is_tbnz. Change its type to
int *. Set is_tbnz to either 1 or 0.
(aarch64_analyze_prologue): Change type of is_link to int. Add
new variables is_cbnz and is_tbnz. Adjust call to
aarch64_decode_cb and aarch64_decode_tb.
H.J. Lu [Thu, 30 Jul 2015 11:17:02 +0000 (04:17 -0700)]
Properly disassemble movnti in Intel mode
gas/testsuite/
PR binutils/13571
* gas/i386/i386.exp: Run i386-intel and x86_64-intel.
* gas/i386/i386-intel.d: New file.
* gas/i386/x86_64-intel.d: Likewise.
opcodes/
PR binutils/13571
* i386-dis.c (MOD_0FC3): New.
(PREFIX_0FC3): Renamed to ...
(PREFIX_MOD_0_0FC3): This.
(dis386_twobyte): Replace PREFIX_0FC3 with MOD_0FC3.
(prefix_table): Replace Ma with Ev on movntiS.
(mod_table): Add MOD_0FC3.
H.J. Lu [Thu, 30 Jul 2015 10:27:44 +0000 (03:27 -0700)]
Don't change the default symbol for relocatable link
We should change the default symbol for the versioned symbol only when
not performing a relocatable link.
bfd/
PR ld/18735
* elflink.c (_bfd_elf_add_default_symbol): Add the default
symbol if not performing a relocatable link.
(elf_link_add_object_symbols): Adjust the default symbol if
not performing a relocatable link.
ld/testsuite/
PR ld/18735
* ld-elf/pr18735.d: New file.
* ld-elf/pr18735.s: Likewise.
GDB Administrator [Thu, 30 Jul 2015 00:00:08 +0000 (00:00 +0000)]
Automatic date update in version.in
Simon Marchi [Wed, 29 Jul 2015 21:15:46 +0000 (17:15 -0400)]
MIPS ptrace build fixes
Since Pedro's ptrace cleanups, the MIPS buildbot compilation fails.
Code in MIPS native uses ptrace with 3 arguments, where ptrace requires
4. When looking at the definition of ptrace in
/usr/include/sys/ptrace.h, it shows that it takes a variable number of
arguments. The wrapper macro in nat/gdb_ptrace.h takes a fixed number
of arguments (4). That would explain why it used to work and stopped.
I am pushing this as obvious, tell me if there is any problem.
I built-tested this with a MIPS toolchain (ct-ng), but I don't have any
setup to test it. At least it should put back the buildbot builder in a
better shape.
gdb/ChangeLog:
* mips-linux-nat.c (write_watchpoint_regs): Add NULL as ptrace's 4th
parameter.
(mips_linux_new_thread): Likewise.
* nat/mips-linux-watch.c (mips_linux_read_watch_registers): Likewise.
gdb/gdbserver/ChangeLog:
* linux-mips-low.c (mips_linux_prepare_to_resume): Add NULL as
ptrace's 4th parameter.
Patrick Palka [Wed, 29 Jul 2015 16:44:21 +0000 (12:44 -0400)]
batch-preserve-term-settings.exp: use send_quit_command some more
Just a slight cleanup. Committed as obvious.
gdb/testsuite/ChangeLog:
* gdb.base/batch-preserve-term-settings.exp
(test_terminal_settings_preserved_after_cli_exit): Use
send_quit_command.
H.J. Lu [Wed, 29 Jul 2015 18:20:04 +0000 (11:20 -0700)]
Use noclone attribute only for GCC 4.5 or newer
noclone attribute was added to GCC 4.5. We should check GCC version
before using it.
* ld-elf/pr18718.c (bar): Use noclone attribute only for GCC
4.5 or newer.
H.J. Lu [Wed, 29 Jul 2015 17:51:08 +0000 (10:51 -0700)]
Move run-time support check for size relocation
We must check run-time support for size relocation first before running
the tests.
* ld-size/size.exp: Move run-time support check.
Patrick Palka [Wed, 29 Jul 2015 15:59:25 +0000 (11:59 -0400)]
Test that terminal settings are restored after quitting via SIGTERM
Tested on x86_64 Debian Stretch, native, gdbserver and
extended-gdbserver. Also tested that the various error paths, like if
$PPID is empty or if SIGTERM did not not kill GDB, function correctly.
gdb/testsuite/ChangeLog:
* gdb.base/batch-preserve-term-settings.exp (send_quit_command):
New proc.
(test_terminal_settings_preserved_after_sigterm): New test.
H.J. Lu [Wed, 29 Jul 2015 16:11:15 +0000 (09:11 -0700)]
Don't set link_info.executable for "ld -r"
This patch changes "ld -r" not to set link_info.executable. It
removes !info->relocatable check for info->executable and adds it
for !info->executable in elflink.c.
bfd/
* elflink.c (elf_link_add_object_symbols): Remove
!info->relocatable check for info->executable. Add
!info->relocatable check for !info->executable.
(elf_link_output_extsym): Remove
!info->relocatable check for info->executable.
ld/
* lexsup.c (parse_args): Don't set link_info.executable to
TRUE for link_info.relocatable.
Pedro Alves [Wed, 29 Jul 2015 15:24:53 +0000 (16:24 +0100)]
Make gdb.base/multi-forks.exp work with the native-extended-gdbserver board
Now that we can expect inferior output with the gdbserver boards, this
is all it takes to have the test pass against extended-remote
gdbserver.
Don Breazeal originally wrong something like this:
https://sourceware.org/ml/gdb-patches/2015-03/msg00506.html
which was what originally inspired the introduction of
$inferior_spawn_id.
gdb/testsuite/ChangeLog:
2015-07-29 Pedro Alves <palves@redhat.com>
Don Breazeal <donb@codesourcery.com>
* gdb.base/multi-forks.exp (continue_to_exit_bp_loc): Expect
output from both inferior_spawn_id and gdb_spawn_id.
Sergio Durigan Junior [Wed, 29 Jul 2015 15:10:49 +0000 (11:10 -0400)]
Uniquefy gdb.threads/attach-into-signal.exp
Hi,
While examining BuildBot's logs, I noticed:
<https://sourceware.org/ml/gdb-testers/2015-q3/msg03767.html>
gdb.threads/attach-into-signal.exp has two nested loops and don't use
unique messages. This commit fixes that. Pushed under the obvious
rule.
gdb/testsuite/ChangeLog:
2015-07-29 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.threads/attach-into-signal.exp (corefunc): Use
with_test_prefix on nested loops, uniquefying the test messages.
Sergio Durigan Junior [Wed, 29 Jul 2015 14:16:38 +0000 (10:16 -0400)]
Fix typo in gdb.python/py-objfile.exp
My last commit
d60a92216e5d599fed6b37c58c744debe38a0b24 introduced a
regression caused by a typo. This fixes it. Checked in as obvious.
Thanks to Pedro for reporting.
gdb/testsuite/ChangeLog:
2015-07-29 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.python/py-objfile.exp: Fix typo that snuck in from my last
commit.
Patrick Palka [Mon, 27 Jul 2015 15:54:07 +0000 (11:54 -0400)]
Make sure terminal settings are restored before exiting
When exiting GDB -- whether it's via the "quit" command, via a SIGTERM,
or otherwise -- we should leave the terminal in the state we acquired
it. To that end, we have to undo any modifications that may have been
made by the TUI (ncurses) or by the CLI (readline).
Tested on x86_64 Debian Stretch.
gdb/ChangeLog:
* top.c: Include "tui/tui.h".
(undo_terminal_modifications_before_exit): New static function.
(quit_force): Use it.
gdb/testsuite/ChangeLog:
* gdb.base/batch-preserve-term-settings.exp
(test_terminal_settings_preserved_after_cli_exit): New test.
Patrick Palka [Tue, 28 Jul 2015 17:58:17 +0000 (13:58 -0400)]
Initialize terminal_state to terminal_is_ours
Right now this variable is initialized to 0 i.e. terminal_is_inferior
and does not get set to terminal_is_ours until target_terminal_init() is
called. This function however only gets called when an inferior is
first created. In the meantime, terminal_state would wrongly remain set
to terminal_is_inferior.
Tested on x86_64 Debian Stretch -- native, gdbserver and
extended-gdbserver.
gdb/ChangeLog:
* target.c (terminal_state): Initialize to terminal_is_ours.
Patrick Palka [Tue, 28 Jul 2015 02:10:13 +0000 (22:10 -0400)]
Clean up batch-preserve-term-settings.exp
See ChangeLog for details. No functional change intended.
Tested on x86_64 Debian Stretch by verifying that the gdb.log output
remains unchanged for native, gdbserver and extended-gdbserver.
gdb/testsuite/ChangeLog:
* gdb.base/batch-preserve-term-settings.exp: Remove top-level
manipulation of saved_gdbflags.
(test_terminal_settings_preserved): Remove global declaration of
the unused variable pagination_prompt. Remove manipulation of
saved_gdbflags. Use a local variable EXTRA_GDBFLAGS instead of
GDBFLAGS.
Yao Qi [Wed, 29 Jul 2015 11:43:10 +0000 (12:43 +0100)]
PR record/18691: Fix fails in solib-precsave.exp
We see the following regressions in testing on x86_64-linux,
reverse-step^M
Cannot access memory at address 0x2aaaaaed26c0^M
(gdb) FAIL: gdb.reverse/solib-precsave.exp: reverse-step into solib function one
when GDB reverse step into a function, GDB wants to skip prologue so
it requests TARGET_OBJECT_CODE_MEMORY to read some code memory in
memory_xfer_partial_1. However in dcache_read_memory_partial, the object
becomes TARGET_OBJECT_MEMORY
return ops->to_xfer_partial (ops, TARGET_OBJECT_MEMORY, NULL,
myaddr, NULL, memaddr, len,
xfered_len);
in reverse debugging, ops->to_xfer_partial is record_full_core_xfer_partial
and it will return TARGET_XFER_E_IO because it can't find any records.
The test fails.
At this moment, the delegate relationship is like
dcache -> record-core -> core -> exec
and we want to GDB read memory across targets, which means if the
requested memory isn't found in record-core, GDB can read memory from
core, and exec even further if needed. I find raw_memory_xfer_partial
is exactly what I want.
gdb:
2015-07-29 Yao Qi <yao.qi@linaro.org>
PR record/18691
* dcache.c (dcache_read_memory_partial): Call
raw_memory_xfer_partial.
* target.c (raw_memory_xfer_partial): Make it non-static.
* target.h (raw_memory_xfer_partial): Declare.
Pedro Alves [Wed, 29 Jul 2015 10:09:46 +0000 (11:09 +0100)]
Don't set gdb,noinferiorio on gdbserver boards
As all tests that check gdb,noinferiorio have been adjusted to expect
inferior output with "-i $inferior_spawn_id", we can remove this now,
and thus enable those tests against gdbserver.
gdb/testsuite/ChangeLog:
2015-07-29 Pedro Alves <palves@redhat.com>
* boards/gdbserver-base.exp: Don't set gdb,noinferiorio.
Pedro Alves [Wed, 29 Jul 2015 10:09:46 +0000 (11:09 +0100)]
interrupt.exp: Revert back to checking gdb,noinferiorio at the top
The following patch will remove the gdb,noinferiorio setting from the
gdbserver boards, so this bit can be reverted.
gdb/testsuite/ChangeLog:
2015-07-29 Pedro Alves <palves@redhat.com>
* gdb.base/interrupt.exp: Revert back to checking gdb,noinferiorio
at the top.
Pedro Alves [Wed, 29 Jul 2015 10:09:45 +0000 (11:09 +0100)]
Unbuffer all tests that rely on stdio
This forces all tests that rely on stdio to be unbuffered, like
interrupt.exp was adjusted in
6f98576f.
To recap, in some scenarios, GDB or GDBserver can be spawned with
input _not_ connected to a tty, and then tests that rely on stdio fail
with timeouts, because the inferior's stdout and stderr streams end up
fully buffered. Calling gdb_unbuffer_output forces output to be
unbuffered.
See https://sourceware.org/ml/gdb-patches/2015-02/msg00809.html and
https://sourceware.org/ml/gdb-patches/2015-02/msg00819.html.
Tested on x86_64 Fedora 20, native, and against a remote gdbserver
board file that connects to the target with ssh, with and without -t
(create pty).
gdb/testsuite/ChangeLog:
2015-07-29 Pedro Alves <palves@redhat.com>
* gdb.base/call-ar-st.c: Include "../lib/unbuffer_output.c".
(main): Call gdb_unbuffer_output.
* gdb.base/call-rt-st.c: Include "../lib/unbuffer_output.c".
(main): Call gdb_unbuffer_output.
* gdb.base/call-strs.c: Include "../lib/unbuffer_output.c".
(main): Call gdb_unbuffer_output.
* gdb.base/call-strs.exp: Adjust to step over the
gdb_unbuffer_output call.
* gdb.base/catch-gdb-caused-signals.c: Include
"../lib/unbuffer_output.c".
(main): Call gdb_unbuffer_output.
* gdb.base/dprintf.c: Include "../lib/unbuffer_output.c".
(main): Call gdb_unbuffer_output.
* gdb.base/ending-run.c: Include "../lib/unbuffer_output.c".
(main): Call gdb_unbuffer_output.
* gdb.base/run.c: Include "../lib/unbuffer_output.c".
(main): Call gdb_unbuffer_output.
* gdb.base/shlib-call.exp: Adjust to step over the
gdb_unbuffer_output call.
* gdb.base/shmain.c: Include "../lib/unbuffer_output.c".
(main): Call gdb_unbuffer_output.
* gdb.base/sizeof.c: Include "../lib/unbuffer_output.c".
(main): Call gdb_unbuffer_output.
* gdb.base/varargs.c: Include "../lib/unbuffer_output.c".
(main): Rename to ...
(test): ... this.
(main): Reimplement.
* gdb.base/varargs.exp: Run to test instead of to main.
* gdb.mi/mi-dprintf.c: Include "../lib/unbuffer_output.c".
(main): Call gdb_unbuffer_output.
Pedro Alves [Wed, 29 Jul 2015 10:09:45 +0000 (11:09 +0100)]
Make gdb.mi/mi-dprintf.exp use $inferior_spawn_id
gdb/testsuite/ChangeLog:
2015-07-29 Pedro Alves <palves@redhat.com>
* gdb.mi/mi-dprintf.exp (mi_expect_dprintf): New procedure,
factore out from mi_continue_dprintf. For call-style dprintfs,
expect dprintf output out of $inferior_spawn_id.
(mi_continue_dprintf): Use mi_expect_dprintf.
* gdb.mi/mi-dprintf.c: Include "../lib/unbuffer_output.c".
(main): Call gdb_unbuffer_output.
Pedro Alves [Wed, 29 Jul 2015 10:09:44 +0000 (11:09 +0100)]
Adjust MI to $inferior_spawn_id
Rather than trying to determine where (which spawn id) the inferior
output comes out from, which depends on e.g., remote that supports
file i/o remote protocol extension, vs remote that sends inferior
output through a separate $inferior_spawn_id, vs native debugging,
which sends output through $gdb_spawn_id, vs native debugging with a
test that uses "separate-inferior-tty" (like mi-console.exp does),
always expect inferior output from both $inferior_spawn_id and
$gdb_spawn_id.
mi-console.exp itself already copes with different possible outputs in
a similar way:
# Combine both outputs in a single pattern.
set output "($semihosted_output|$native_output)"
Fixes:
FAIL: gdb.mi/mi-console.exp: Testing console output inferior output (timeout)
when testing against local gdbserver with gdb,noinferiorio removed
from the board file.
gdb/testsuite/ChangeLog:
2015-07-29 Pedro Alves <palves@redhat.com>
* lib/mi-support.exp (mi_inferior_spawn_id): Delete.
(default_mi_gdb_start): Set inferior_spawn_id instead of
mi_inferior_spawn_id. If $inferior_spawn_id is not set, set it to
gdb_spawn_id.
(mi_gdb_test): Always expect inferior output from both
$inferior_spawn_id and $gdb_spawn_id.
Pedro Alves [Wed, 29 Jul 2015 10:09:44 +0000 (11:09 +0100)]
Make gdb.gdb/selftest.exp use '-i $inferior_spawn_id'
gdb/testsuite/ChangeLog:
2015-07-29 Pedro Alves <palves@redhat.com>
* gdb.gdb/selftest.exp (test_with_self): Update comment. Use
send_inferior and $inferior_spawn_id.
Pedro Alves [Wed, 29 Jul 2015 10:09:43 +0000 (11:09 +0100)]
Make gdb.gdb/complaints.exp use '-i $inferior_spawn_id' and gdb_test_stdio
gdb/testsuite/ChangeLog:
2015-07-29 Pedro Alves <palves@redhat.com>
* gdb.gdb/complaints.exp (test_initial_complaints)
(test_serial_complaints, test_short_complaints): Use
gdb_test_stdio.
(test_empty_complaint): Handle $inferior_spawn_id !=
$gdb_spawn_id.
Pedro Alves [Wed, 29 Jul 2015 10:09:43 +0000 (11:09 +0100)]
Make gdb.base/varargs.exp use gdb_test_stdio
gdb/testsuite/ChangeLog:
2015-07-29 Pedro Alves <palves@redhat.com>
* gdb.base/varargs.exp: Use gdb_test_stdio.
Pedro Alves [Wed, 29 Jul 2015 10:09:42 +0000 (11:09 +0100)]
Make gdb.base/shlib-call.exp use gdb_test_stdio
gdb/testsuite/ChangeLog:
2015-07-29 Pedro Alves <palves@redhat.com>
* gdb.base/shlib-call.exp: Use gdb_test_stdio.
Pedro Alves [Wed, 29 Jul 2015 10:09:42 +0000 (11:09 +0100)]
Make gdb.base/ending-run.exp use gdb_test_stdio
gdb/testsuite/ChangeLog:
2015-07-29 Pedro Alves <palves@redhat.com>
* gdb.base/ending-run.exp: Use gdb_test_stdio.
Pedro Alves [Wed, 29 Jul 2015 10:09:41 +0000 (11:09 +0100)]
Make gdb.base/call-rt-st.exp use $inferior_spawn_id
gdb/testsuite/ChangeLog:
2015-07-29 Pedro Alves <palves@redhat.com>
* gdb.base/call-rt-st.exp (print_struct_call): Split "result"
parameter into two new parameters, "inf_result" and "gdb_result".
Expect inferior output and gdb output from $inferior_spawn_id and
$gdb_spawn_id, respectively. Adjust all callers.
Pedro Alves [Wed, 29 Jul 2015 10:09:40 +0000 (11:09 +0100)]
Make gdb.base/call-ar-st.exp use gdb_test_stdio
gdb/testsuite/ChangeLog:
2015-07-29 Pedro Alves <palves@redhat.com>
* gdb.base/call-ar-st.exp: Use gdb_test_stdio+multi_line instead
of gdb_test_sequence.
Pedro Alves [Wed, 29 Jul 2015 10:09:40 +0000 (11:09 +0100)]
Make gdb.base/a2-run.exp use $inferior_spawn_id and gdb_test_stdio
This one is a little more complicated than the other patches in this
series, because of the exit status wrapper handling, requiring a
little state machine.
gdb/testsuite/ChangeLog:
2015-07-29 Pedro Alves <palves@redhat.com>
* gdb.base/a2-run.exp (saw_usage, saw_exit_wrapper)
(saw_spurious_output): Expect inferior output from
$inferior_spawn_id. Use gdb_test_stdio.
Pedro Alves [Wed, 29 Jul 2015 10:09:39 +0000 (11:09 +0100)]
Make gdb.base/dprintf.exp use gdb_test_stdio
This one needed a larger revamp. The issue is that the "info
breakpoints" test at the bottom of the file is broken on targets that
can do both server-side dprintf, and inferior I/O, because then
neither the breakpoint numbers match nor the "already hit N times"
output.
Address that by making the test restart gdb from scratch when
switching between dprintf styles. Test groups are factored into
procedures, and we now use with_test_prefix. While we're changing
test messages, lowercase a few test messages, and then while at it,
modernize a couple things here and there.
gdb/testsuite/ChangeLog:
2015-07-29 Pedro Alves <palves@redhat.com>
* gdb.base/dprintf.exp: Use standard_testfile. Change
prepare_for_testing call.
(srcfile): Don't set.
(restart): New procedure.
(test_dprintf): New procecure, use to continue over dprintfs.
(test_call, test_agent): New procedures, tests moved here.
Restart gdb and recreate dprintfs. Adjust expected output.
Pedro Alves [Wed, 29 Jul 2015 10:09:39 +0000 (11:09 +0100)]
Make gdb.base/catch-gdb-caused-signals.exp use gdb_test_stdio
gdb/testsuite/ChangeLog:
2015-07-29 Pedro Alves <palves@redhat.com>
* gdb.base/catch-gdb-caused-signals.exp: Use gdb_test_stdio.
Pedro Alves [Wed, 29 Jul 2015 10:09:38 +0000 (11:09 +0100)]
Make gdb.base/call-strs.exp use gdb_test_stdio
gdb/testsuite/ChangeLog:
2015-07-29 Pedro Alves <palves@redhat.com>
* gdb.base/call-strs.exp: Use gdb_test_stdio instead of gdb_test.
Pedro Alves [Wed, 29 Jul 2015 10:09:38 +0000 (11:09 +0100)]
Make gdb.base/sizeof.exp use gdb_test_stdio
gdb/testsuite/ChangeLog:
2015-07-29 Pedro Alves <palves@redhat.com>
* gdb.base/sizeof.exp (check_sizeof, check_valueof): Use
gdb_test_stdio.
Pedro Alves [Wed, 29 Jul 2015 10:09:37 +0000 (11:09 +0100)]
Introduce gdb_test_stdio
This adds a new helper procedure to be used by tests that rely on
stdio.
gdb/testsuite/ChangeLog:
2015-07-29 Pedro Alves <palves@redhat.com>
* lib/gdb.exp (gdb_test_stdio): New procedure.
Pedro Alves [Wed, 29 Jul 2015 10:09:37 +0000 (11:09 +0100)]
Don't rely on inferior I/O in gdb.base/restore.exp
There seems to be no point in relying on stdio here. Simply use
gdb_continue_to_end instead.
(not removing the printf calls, as the .c file is half generated.)
gdb/testsuite/ChangeLog:
2015-07-29 Pedro Alves <palves@redhat.com>
* gdb.base/restore.exp (restore_tests): Use gdb_continue_to_end.
Pedro Alves [Wed, 29 Jul 2015 10:09:36 +0000 (11:09 +0100)]
Don't rely on inferior I/O in {call-signal-resume, unwindonsignal}.exp
These tests rely on inferior I/O, but that seems pointless and
unrelated here. Simply remove the printf calls, and don't expect
them.
gdb/testsuite/ChangeLog:
2015-07-29 Pedro Alves <palves@redhat.com>
* gdb.base/call-signal-resume.exp: Remove check for
gdb,noinferiorio. Don't expect "no signal". Use gdb_test.
* gdb.base/unwindonsignal.exp: Likewise.
* gdb.base/call-signals.c (gen_signal): Remove printf call.
* gdb.base/unwindonsignal.c (gen_signal): Likewise.
Pedro Alves [Wed, 29 Jul 2015 10:09:36 +0000 (11:09 +0100)]
Don't rely on inferior I/O in gdb.base/siginfo-addr.exp
No point in relying on stdio in this test. Simply run to a breakpoint
instead.
gdb/testsuite/ChangeLog:
2015-07-29 Pedro Alves <palves@redhat.com>
* gdb.base/siginfo-addr.c (pass): New function.
(handler): Call it iff si_addr is correct.
* gdb.base/siginfo-addr.exp: Remove gdb_skip_stdio_test check.
Set a breakpoint at "pass" and continue to it.
Hans-Peter Nilsson [Wed, 29 Jul 2015 03:39:27 +0000 (05:39 +0200)]
bfd/mmo.c (MMIX): Fix massive gcc LTO testsuite failures.
* mmo.c (mmo_write_symbols_and_terminator): Skip symbol-type
assignment loop for bfd plugin objects.
GDB Administrator [Wed, 29 Jul 2015 00:00:09 +0000 (00:00 +0000)]
Automatic date update in version.in
Sergio Durigan Junior [Tue, 28 Jul 2015 21:38:14 +0000 (17:38 -0400)]
Uniquify test names from gdb.python/{py-objfile.exp,py-pp-registration.exp}
While running some regression tests, I noticed that the two Python
tests mentioned in the $SUBJECT contain non-unique names. This is a
violation of our guidelines:
<https://sourceware.org/gdb/wiki/GDBTestcaseCookbook#Make_sure_test_messages_are_unique>
And also makes things harder for BuildBot. So I hacked both testcases
and made every test name unique. I guess this could be considered an
obvious patch, but I decided to post it before pushing because others
may have different opinions about the names.
OK to apply?
gdb/testsuite/ChangeLog:
2015-07-28 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.python/py-objfile.exp: Make some tests have unique names.
* gdb.python/py-pp-registration.exp: Likewise.
Pedro Alves [Tue, 28 Jul 2015 17:04:07 +0000 (18:04 +0100)]
Fix gdb.server/server-exec-info.exp with the extended-remote board
This test fails with --target_board=native-extended-gdbserver because
it misses the usual "disconnect":
(gdb) spawn ../gdbserver/gdbserver --once :2347 /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.server/server-exec-info
Process /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.server/server-exec-info created; pid = 4736
Listening on port 2347
target extended-remote localhost:2347
Already connected to a remote target. Disconnect? (y or n) ^CsQuit
(gdb) et sysroot remote:
Undefined command: "et". Try "help".
(gdb) n
The program is not being run.
(gdb) FAIL: gdb.server/server-exec-info.exp: set sysroot remote: (got interactive prompt)
info files
(gdb) FAIL: gdb.server/server-exec-info.exp: info files
gdb/testsuite/ChangeLog:
2015-07-28 Pedro Alves <palves@redhat.com>
* gdb.server/server-exec-info.exp: Issue a "disconnect".
Simon Marchi [Tue, 28 Jul 2015 15:01:50 +0000 (11:01 -0400)]
Consider addressable memory unit size in various value functions
This patch updates various value handling functions to make them
consider the addressable memory unit size of the current architecture.
This allows to correctly extract and print values on architectures whose
addressable memory unit is not 8 bits.
The patch doesn't cover all the code that would ideally need to be
adjusted, only the code paths that we happen to use, plus a few obvious
ones. Specifically, those areas are not covered by this patch:
- Management of unavailable bits
- Bitfields
- C++ stuff
Regression-tested on x86-64 Ubuntu 14.04. I saw no related test result
change.
gdb/ChangeLog:
* c-valprint.c (c_val_print_array): Consider addressable memory
unit size.
(c_val_print_ptr): Likewise.
(c_val_print_int): Likewise.
* findvar.c (read_frame_register_value): Likewise.
* valarith.c (find_size_for_pointer_math): Likewise.
(value_ptrdiff): Likewise.
(value_subscripted_rvalue): Likewise.
* valops.c (read_value_memory): Likewise (and rename variables).
(value_assign): Likewise.
(value_repeat): Likewise.
(value_array): Likewise.
(value_slice): Likewise.
* valprint.c (generic_val_print_ptr): Likewise.
(generic_val_print_enum): Likewise.
(generic_val_print_bool): Likewise.
(generic_val_print_int): Likewise.
(generic_val_print_char): Likewise.
(generic_val_print_float): Likewise.
(generic_val_print_decfloat): Likewise.
(generic_val_print_complex): Likewise.
(val_print_scalar_formatted): Likewise.
(val_print_array_elements): Likewise.
* value.c (set_value_parent): Likewise.
(value_contents_copy_raw): Likewise.
(set_internalvar_component): Likewise.
(value_primitive_field): Likewise.
(value_fetch_lazy): Likewise.
* value.h (read_value_memory): Update comment.
Simon Marchi [Tue, 28 Jul 2015 15:01:50 +0000 (11:01 -0400)]
Introduce get_value_arch
Similar to get_type_arch, used to get the gdbarch associated to a
struct value.
gdb/ChangeLog:
* value.c (get_value_arch): New function.
* value.h (get_value_arch): New declaration.
Simon Marchi [Tue, 28 Jul 2015 15:01:49 +0000 (11:01 -0400)]
Update comments in struct value for non-8-bits architectures
gdb/ChangeLog:
* value.c (struct value): Update comments.
Simon Marchi [Tue, 28 Jul 2015 15:01:49 +0000 (11:01 -0400)]
Update comment for struct type's length field, introduce type_length_units
This patch tries to clean up a bit the blur around the length field in
struct type, regarding its use with architectures with non-8-bits
addressable memory. It clarifies that the field is expressed in host
bytes, which is what is the closest to the current reality.
It also introduces a new function to get the length of the type in
target addressable memory units.
gdb/ChangeLog:
* gdbtypes.c (type_length_units): New function.
* gdbtypes.h (type_length_units): New declaration.
(struct type) <length>: Update comment.
Robert Suchanek [Tue, 28 Jul 2015 10:26:39 +0000 (11:26 +0100)]
Add cores for M5100 series
gas/
* config/tc-mips.c (mips_cpu_info_table): Add m5100 and m5101 entries.
* doc/c-mips.texi: Document m5100 and m5101 for -march=.
Robert Suchanek [Tue, 28 Jul 2015 10:26:31 +0000 (11:26 +0100)]
Add -march=interaptiv
gas/
* config/tc-mips.c (mips_cpu_info_table): Add interaptiv entry.
* doc/c-mips.text: Document -march=interaptiv.
Alan Modra [Tue, 28 Jul 2015 01:33:57 +0000 (11:03 +0930)]
Fallout from "Reorder more powerpc64 sections for -z relro"
Commit
23283c1b changed the layout of some bss style sections on
powerpc64, but neglected to add a page gap before the third PT_LOAD
segment created by this reording. Without a page gap we get two
PT_LOAD headers that overlap by one page in memory. That shouldn't be
allowed because the dynamic loader will load garbage from the first
page of the last segment over the last page of the previous segment.
bfd/
* elf.c (_bfd_elf_map_sections_to_segments): Do not make a new
segment for loaded sections after nonloaded sections if the
sections are on the same page.
ld/testsuite/
* ld-powerpc/elfv2so.d: Update
Iain Buclaw [Tue, 28 Jul 2015 07:57:32 +0000 (09:57 +0200)]
Check for asprintf and vasprintf during configure stage.
This should fix some build errors seen on AIX, MinGW, and possibly other
non-GNU systems too due to missing asprintf().
bfd/
* configure.in: Add asprintf and vasprintf to AC_CHECK_DECLS.
* config.in, configure: Regenerate.
GDB Administrator [Tue, 28 Jul 2015 00:00:08 +0000 (00:00 +0000)]
Automatic date update in version.in
H.J. Lu [Mon, 27 Jul 2015 23:16:17 +0000 (16:16 -0700)]
Set NOPIE_CFLAGS and NOPIE_LDFLAGS
GCC 6 can be configured to generate PIE by default. But some linker
size tests expect non-PIE. This patch defines NOPIE_CFLAGS to
"-fno-PIE" and NOPIE_LDFLAGS to "-no-pie" if target compiler supports
them. Add $NOPIE_CFLAGS and $NOPIE_LDFLAGS to linker size tests if
needed.
* config/default.exp (NOPIE_CFLAGS): New.
(NOPIE_LDFLAGS): Likewise.
* ld-size/size.exp (run_cc_link_tests): Add $NOPIE_CFLAGS and
$NOPIE_LDFLAGS if needed.
(run_ld_link_exec_tests): Add $NOPIE_CFLAGS if needed.
This page took 0.052624 seconds and 4 git commands to generate.