Olof Johansson [Thu, 22 May 2014 05:45:52 +0000 (22:45 -0700)]
Merge tag 'samsung-dt' of git./linux/kernel/git/kgene/linux-samsung into next/dt
Samsung DT updates for v3.16
- exynos4
: add missing pinctrls
- exynos4412-trats2
: update camera nodes and add rear camera nodes
: rename alias for i2c_ak8975 label
Update camera nodes for exynos4 and exynos4412-trats2
- exynos5250
: update DWC3 usb controller and enable to use generic USB DRD phy
- exynos5250-snow
: enable dp-controller, fimd, hdmi and pwm backlight
: add sound node and Vbus regulator for USB 3.0
: add tps65090 power regulator
: add pinctrl for EC irq and i2c-arbitrator
- exynos5420
: change to correct compatible string for hdmi
: add PD entry to MFC codec and enable DWC3 and USB 3.0 PHY
: add MFC memory banks for smdk5420 and arndale-octa boards
- exynos5420-peach-pit
: add support exynos5420 based peach-pit board
: add sound node and Vbus regulatro for USB 3.0
: enable dp-controller, fimd
- exynos5420-smdk5420
: add Vbus regulatro for USB 3.0
- use generic DT bindings for map SYSRAM
[olof: Fixed up conflict with a fix for 4212 secondary CPU startup, carrying
over the fix to the reworked code]
* tag 'samsung-dt' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (32 commits)
ARM: dts: Add MFC memory banks to exynos5420 boards
ARM: dts: enable dp-controller for exynos5420-peach-pit board
ARM: dts: enable fimd for exynos5420 based peach-pit board
ARM: dts: enable dp-controller for exynos5250-snow board
ARM: dts: enable fimd for exynos5250-snow board
ARM: dts: enable pwm backlight for exynos5250-snow
ARM: dts: Add pwmX_out pinctrl nodes to exynos5250
ARM: dts: Add Vbus regulator for USB 3.0 on exynos5420-smdk5420
ARM: dts: Add Vbus regulator for USB 3.0 on exynos5420-peach-pit
ARM: dts: Add Vbus regulator for USB 3.0 on exynos5250-snow
ARM: dts: Add PD entry to MFC codec on exynos5420
ARM: dts: Add sound node for exynos5420-peach-pit board
ARM: dts: Add sound node for exynos5250-snow board
ARM: dts: Update DWC3 usb controller to use new phy driver for exynos5250
ARM: dts: Enable support for generic USB DRD phy for exynos5250
ARM: dts: Enable support for DWC3 controller for exynos5420
ARM: dts: Enable support for USB 3.0 PHY controller for exynos5420
ARM: dts: enable hdmi for exynos5420-peach-pit board
ARM: dts: change to correct compatible string for exynos5420 hdmi
ARM: dts: enable hdmi for exynos5250 based snow board
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Thu, 22 May 2014 05:41:50 +0000 (22:41 -0700)]
Merge commit '
702b691e4a71' into next/dt
Merging in Samsung fixes for 3.15-rc to avoid an annoying context conflict
with new DT code.
* commit '
702b691e4a71':
ARM: dts: Remove g2d_pd node for exynos5420
ARM: dts: Remove mau_pd node for exynos5420
ARM: exynos_defconfig: enable HS-I2C to fix for mmc partition mount
ARM: dts: disable MDMA1 node for exynos5420
ARM: EXYNOS: fix the secondary CPU boot of exynos4212
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Wed, 21 May 2014 22:06:16 +0000 (15:06 -0700)]
Merge tag 'tegra-for-3.16-dt' of git://git./linux/kernel/git/tegra/linux into next/dt
Merge "ARM: tegra: device tree changes for 3.16" from Stephen Warren:
The bulk of Tegra changes for 3.16 are to device trees. Highlights are:
- New board support for:
- Jetson TK1.
- SHIELD.
- Tegra Note 7.
- Colibri T30 module.
- HDMI support on Venice2.
- SD card write-protect GPIOs added to some boards.
- Numerous regulator cleanups.
* tag 'tegra-for-3.16-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: initial add of Colibri T30
ARM: tegra: add device tree for SHIELD
ARM: tegra: add SD wp-gpios to Venice2 DT
ARM: tegra: add Tegra Note 7 device tree
ARM: tegra: add SD wp-gpios to Dalmore DT
ARM: tegra: add SD wp-gpios to Jetson TK1 DT
ARM: tegra: use correct audio CODEC on Jetson TK1
ARM: tegra: dalmore - Add DSI power supply
ARM: tegra: dalmore - Add +5V HDMI supply
ARM: tegra: beaver - Add +5V HDMI supply
ARM: tegra: harmony - Add +5V HDMI supply
ARM: tegra: jetson-tk1 - Enable HDMI support
ARM: tegra: venice2 - Enable HDMI
ARM: tegra: Add Tegra124 HDMI support
ARM: tegra: fix Venice2 SD card VQMMC supply
ARM: tegra: make Venice's +3.3V_RUN regulator always on
ARM: tegra: fix Jetson TK1 SD card supply
ARM: tegra: define Jetson TK1 regulators
ARM: tegra: add Jetson TK1 device tree
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Wed, 21 May 2014 21:59:21 +0000 (14:59 -0700)]
Merge tag 'imx-dt-3.16' of git://git./linux/kernel/git/shawnguo/linux into next/dt
Merge "ARM: imx: device tree changes for 3.16" from Shawn Guo:
i.MX device tree changes for 3.16:
- New board support: imx35-pdk, imx51-digi-connectcore, imx6dl-phytec,
imx6dl-riotboard, and vf610-colibri.
- Improve device tree support for imx51-babbage and eukrea-cpuimx51 to
get the same level support as board files, so that we can kill the
board files.
- Quite some updates on imx27-phytec-phycore board support from
Alexander Shiyan
- Enable USB, sound and touchscreen on the eukrea imx25/35/51 boards,
from Denis Carikli
- Quite a lot of patches from Fabio Estevam, updating Freescale
imx25-pdk and imx27-pdk board support
- Correct USB device configuration for imx25/35
- Fixes i2c4 device node in imx6dl.dtsi regarding to compatible string
and clock data
- Enable HDMI, TVE, LVDS display support on a bunch of imx5/6 boards
- Update PCIe to the new binding and enable PCIe support on
imx6qdl-sabresd board
- A couple of imx6q-dmo-edmqmx6 updates from Lucas Stach, adding pfuze
irq gpio and SPI flash
- Enable CODA7541 VPU for i.MX53
- A series of updates on imx6qdl-phytec boards from Philipp Zabel
- Small cleanups and fixes on board imx28-duckbill - Michael Heimpold
- Add stdout-path property to i.MX boards
- Karo TX25 board updates from Sascha Hauer
- Enable pwm and sdhc devices for board vf610-twr
* tag 'imx-dt-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (105 commits)
ARM: dts: imx35-pdk: Fix memory region description
ARM: dts: imx51-eukrea-mbimxsd51-baseboard: Add CAN support
ARM: dts: imx6: add new board RIoTboard
ARM: dts: imx6: i2c4 cleanup
ARM: dts: imx6: edmqmx6: add vcc and vio power supplies to stmpe
ARM: dts: Karo TX25: use hardware ecc
ARM: dts: Karo TX25: Add phy reset gpio and supply for FEC
ARM: dts: Karo TX25: Add pinctrl nodes
ARM: dts: i.MX25: Add IRAM node
ARM: dts: i.MX25: Add mmc aliases
ARM: dts: i.MX51 babbage: Fix FEC pad ctrl settings
ARM: dts: imx6qdl-sabresd: Add USDHC4 support
ARM: imx: add HDMI support for SolidRun HummingBoard and Cubox-i
ARM: dts: imx6: edmqmx6: add SPI bus and flash
ARM: dts: imx6: edmqmx6: add pinctrl for pfuze irq gpio
ARM: dts: imx6q-udoo: Add HDMI support
ARM: dts: Add stdout-path property to i.MX boards
ARM: dts: imx: Fix LVDS mapping for Ventana GW52xx
ARM: dts: imx: add LVDS backlight for Ventana
ARM: dts: imx6qdl-sabresd: remove power-on gpio from pcie
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Wed, 21 May 2014 21:36:06 +0000 (14:36 -0700)]
Merge tag 'sunxi-dt-for-3.16' of https://github.com/mripard/linux into next/dt
Merge "Allwinner DT additions for 3.16" from Maxime Ripard:
- Introduction of the MMC controlers
- New board: A10s R7, Mele M9, APP4-EVB1
- Enabled the PMU on the Cortex A7-based SoCs
* tag 'sunxi-dt-for-3.16' of https://github.com/mripard/linux: (38 commits)
ARM: sunxi: dt: declare the r_pio pin controller for A31 SoC
ARM: sunxi: dt: add PRCM clk and reset controller subdevices
ARM: sunxi: dt: add APP4-EVB1 board support
ARM: sun6i: dt: Add support for the USB controllers
ARM: sun6i: Add the USB clocks to the DTSI
ARM: dts: sun5i: Add new A10s r7 hdmi tv dongle board
ARM: dts: sun7i: Add reg_vcc3v3 to sun7i board mmc nodes
ARM: dts: sun6i: Add reg_vcc3v3 to sun6i board mmc nodes
ARM: dts: sun5i: Add reg_vcc3v3 to sun5i board mmc nodes
ARM: dts: sun4i: Add reg_vcc3v3 to sun4i board mmc nodes
ARM: dts: sunxi: Add reg_vcc3v3 supply to sunxi-common-regulators.dtsi
ARM: dts: sun7i: Add basic support for the Cubietruck WiFi module
ARM: dts: sun7i: Enable mmc controller on various A20 boards
ARM: dts: sun7i: Add pin-muxing info for the mmc controllers
ARM: dts: sun7i: Add mmc controller nodes
ARM: dts: sun6i: Add new sun6i-a31-m9 dts file for Mele M9
ARM: dts: sun6i: Add mmc controller nodes
ARM: dts: sun6i: Add mmc clocks
ARM: dts: sun5i: Enable mmc controller on various A10s and A13 boards
ARM: dts: sun5i: Add mmc controller nodes
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 20 May 2014 06:00:25 +0000 (23:00 -0700)]
Merge tag 'renesas-dt3-for-v3.16' of git://git./linux/kernel/git/horms/renesas into next/dt
Merge "Third Round of Renesas ARM Based SoC DT Updates for v3.16" from Simon
Horman:
r8a7791 (R-Car M2), r8a7779 (R-Car H1), r8a7778 (R-Car M1),
r8a7740 (R-Mobile A1) and r8a73a4 (R-Mobile APE6) SoCs
* Move interrupt-parent property to root node
r8a7791 (R-Car M2) and r8a7790 (R-Car H2) SoCs
* Add GPIO clocks
r8a7791 (R-Car M2) based Henninger board
* Add MSIOF0, QSPI and SDHI0/2 support
* Specify EXTAL frequency
r8a7779 (R-Car H1) based Marzen board
* Set SMSC lan to use irq-push-pull
r8a7740 (R-Mobile A1) SoC
* Remove duplicate interrupt-parent property
r8a7740 (R-Mobile A1) based Armadillo800 EVA board
* Add Ethernet support
* tag 'renesas-dt3-for-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: r8a7740 dtsi: Remove duplicate interrupt-parent property
ARM: shmobile: marzen-reference: Set SMSC lan to use irq-push-pull
ARM: shmobile: r8a7791 dtsi: Add GPIO clocks
ARM: shmobile: r8a7790 dtsi: Add GPIO clocks
ARM: shmobile: dts: Move interrupt-parent property to root node
ARM: shmobile: armadillo-reference dts: Add Ethernet support
ARM: shmobile: r8a7740 dtsi: Add Ethernet support
ARM: shmobile: henninger: add MSIOF0 DT support
ARM: shmobile: henninger: add QSPI DT support
ARM: shmobile: henninger: add SDHI0/2 DT support
ARM: shmobile: henninger: specify EXTAL frequency
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 20 May 2014 05:46:00 +0000 (22:46 -0700)]
Merge tag 'at91-dt2' of git://github.com/at91linux/linux-at91 into next/dt
Merge "at91: DT for 3.16 #2" from Nicolas Ferre:
3.16: second DT series:
- at91sam9rl and at91sam9261 fixes about PLL ranges
- at91sam9261 more comprehensive support for SSC
- sama5d3 Xplained: addition of pull-ups, PWM and PMIC (regulator)
* tag 'at91-dt2' of git://github.com/at91linux/linux-at91:
ARM: at91/dt: at91-sama5d3_xplained: add the regulator device node
ARM: at91: add 2 PWM outputs to SAMA5D3 Xplained
ARM: at91: add PWM pinctrl to SAMA5D3
ARM: at91: add pull-up to i2c[02] on SAMA5D3 Xplained
ARM: at91/dt: sam9rl: Fix PLL output range and mck divisors
ARM: at91/dt: sam9261: Add ssc2, SSC clocks and pcks
ARM: at91/dt: sam9261: Fix PLL output ranges and other clocks divisors
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 20 May 2014 05:23:48 +0000 (22:23 -0700)]
Merge tag 'keystone-dts' of git://git./linux/kernel/git/ssantosh/linux-keystone into next/dt
Merge "ARM: Keystone DTS updates for 3.16" from Santosh Shilimkar:
Keystone DTS updates for 3.16
- Few of address cell warning fixes.
- Add Lamarr and Edision EVM NOR flash and NAND devices.
- Update dts to make use of dma-ranges and dma-coherent properties.
* tag 'keystone-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
ARM: dts: keystone-evm: add spi nor flash support
ARM: dts: k2l-evm: add AEMIF/NAND device entry
ARM: dts: k2e-evm: add AEMIF/NAND device entry
ARM: dts: keystone: Update USB node for dma properties
ARM: dts: keystone: Use dma-ranges property
ARM: dts: keystone: add cell's information to spi nodes
ARM: dts: keystone: move i2c0 device node from SoC to board files
ARM: dts: keystone: add cell's information to i2c nodes
ARM: dts: keystone: drop address and size cells from GIC node
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 20 May 2014 05:02:16 +0000 (22:02 -0700)]
Merge tag 'v3.16-rockchip-dt' of git://git./linux/kernel/git/mmind/linux-rockchip into next/dt
Merge "ARM: rockchip: devicetree changes for v3.16" from Heiko Stübner:
Addition of missing board compatible names and their vendor-prefixes
as well as the dts portions of the pinctrl rework.
* tag 'v3.16-rockchip-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: convert pinctrl nodes to new bindings
ARM: dts: rockchip: add root compatible properties
of: add mundoreader and radxa vendor prefixes
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 20 May 2014 04:55:03 +0000 (21:55 -0700)]
Merge tag 'mvebu-dt-3.16' of git://git.infradead.org/linux-mvebu into next/dt
Merge "ARM: mvebu: DT changes for v3.16" from Jason Cooper:
mvebu DT changes for v3.16
- kirkwood
- rework nsa3x0 board to add nsa320
- large cleanup to facilitate use in barebox
- guruplug phy updates
- audio updates for t5325
- mvebu
- use clocks vice clock-frequency for uart nodes
- armada 375/380/385
- add watchdog node
- add coherency fabric
- add smp support
- add sdhci
- add ahci
- add thermal sensor
- armada 370/XP
- and pmsu
* tag 'mvebu-dt-3.16' of git://git.infradead.org/linux-mvebu: (35 commits)
ARM: Kirkwood: t5325: Use simple card to instantiate audio
ARM: Kirkwood: DT: Add missing #sound-dai-cells property
ARM: Kirkwood: Add node for audio codec
ARM: dts: kirkwood: set Guruplug phy-connection-type to rgmii-id
ARM: dts: kirkwood: set Guruplug ethernet PHY compatible
ARM: dts: kirkwood: set default pinctrl for I2C1 on 6282
ARM: dts: kirkwood: set default pinctrl for I2C0
ARM: dts: kirkwood: set default pinctrl for NAND
ARM: dts: kirkwood: set default pinctrl for SPI0
ARM: dts: kirkwood: set default pinctrl for UART0/1
ARM: dts: kirkwood: set default pinctrl for GBE1
ARM: dts: kirkwood: consolidate common pinctrl settings
ARM: dts: kirkwood: add pinctrl node to common SoC include
ARM: dts: kirkwood: rename pin-controller nodes
ARM: dts: kirkwood: remove clock-frequency properties from UART nodes
ARM: dts: kirkwood: add stdout-path property to all boards
ARM: dts: kirkwood: add node labels
ARM: mvebu: Enable the thermal sensor in Armada 380/385 SoC
ARM: mvebu: Enable the thermal sensor in Armada 375 SoC
ARM: mvebu: don't use clocks property in UART node for Netgear RN2120
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Sachin Kamat [Mon, 19 May 2014 16:04:13 +0000 (01:04 +0900)]
ARM: dts: Add MFC memory banks to exynos5420 boards
Add MFC memory banks to Exynos5420 based SMDK and Arndale-octa boards.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Rahul Sharma [Mon, 19 May 2014 14:01:46 +0000 (23:01 +0900)]
ARM: dts: enable dp-controller for exynos5420-peach-pit board
Enable dp-controller for peach-pit board.
Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Rahul Sharma [Mon, 19 May 2014 14:01:18 +0000 (23:01 +0900)]
ARM: dts: enable fimd for exynos5420 based peach-pit board
Enable fimd for peach-pit board.
Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Rahul Sharma [Mon, 19 May 2014 13:58:47 +0000 (22:58 +0900)]
ARM: dts: enable dp-controller for exynos5250-snow board
Enable dp-controller for snow board.
Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Rahul Sharma [Mon, 19 May 2014 13:56:49 +0000 (22:56 +0900)]
ARM: dts: enable fimd for exynos5250-snow board
Enable fimd node for snow board.
Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Ajay Kumar [Mon, 19 May 2014 13:38:18 +0000 (22:38 +0900)]
ARM: dts: enable pwm backlight for exynos5250-snow
Add PWM backlight node for exynos5250 based snow board.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Ajay Kumar [Mon, 19 May 2014 13:38:17 +0000 (22:38 +0900)]
ARM: dts: Add pwmX_out pinctrl nodes to exynos5250
Adds the PWM nodes to 5250 pinctrl dtsi file.
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Vivek Gautam [Mon, 19 May 2014 13:30:48 +0000 (22:30 +0900)]
ARM: dts: Add Vbus regulator for USB 3.0 on exynos5420-smdk5420
Add required fixed-regulator for VBUS supply for USB 3.0
controller phy.
Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Vivek Gautam [Mon, 19 May 2014 13:29:42 +0000 (22:29 +0900)]
ARM: dts: Add Vbus regulator for USB 3.0 on exynos5420-peach-pit
Add required fixed-regulator for VBUS supply for USB 3.0
controller phy.
Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Vivek Gautam [Mon, 19 May 2014 13:23:43 +0000 (22:23 +0900)]
ARM: dts: Add Vbus regulator for USB 3.0 on exynos5250-snow
Add required fixed-regulator for VBUS supply for USB 3.0
controller phy.
Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Sachin Kamat [Fri, 16 May 2014 22:57:10 +0000 (07:57 +0900)]
ARM: dts: Add PD entry to MFC codec on exynos5420
PD entry was missing in MFC codec node.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Reviewed-by : Arun Kumar K <arun.kk@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Tushar Behera [Fri, 16 May 2014 22:44:10 +0000 (07:44 +0900)]
ARM: dts: Add sound node for exynos5420-peach-pit board
The audio setup on Peach-pit board is similar to Snow board, hence the
sound-card driver used on Snow board can be reused on Peach-pit board.
Peach-pit board uses MAX98090 audio codec.
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Tushar Behera [Fri, 16 May 2014 22:43:18 +0000 (07:43 +0900)]
ARM: dts: Add sound node for exynos5250-snow board
The audio codec on Snow board, MAX98095 is connected on I2C7 bus.
Also it requires the GPX1-7 line to be pulled up.
Updated Snow DTS file to incorporate above changes and added a
sound node to instantiate the I2S-based sound card.
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Vivek Gautam [Thu, 15 May 2014 21:38:15 +0000 (06:38 +0900)]
ARM: dts: Update DWC3 usb controller to use new phy driver for exynos5250
Removing the dt node for older usb3 phy driver from Exynos5250
device tree and updating the dt node for DWC3 controller to
use new phy driver based on generic phy framework.
Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Vivek Gautam [Thu, 15 May 2014 21:38:10 +0000 (06:38 +0900)]
ARM: dts: Enable support for generic USB DRD phy for exynos5250
Add device tree node for new usbdrd-phy driver, which
is based on generic phy framework.
Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Vivek Gautam [Thu, 15 May 2014 21:38:01 +0000 (06:38 +0900)]
ARM: dts: Enable support for DWC3 controller for exynos5420
Add device tree nodes for DWC3 controller present on
Exynos 5420 SoC, to enable support for USB 3.0.
Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Vivek Gautam [Thu, 15 May 2014 21:37:03 +0000 (06:37 +0900)]
ARM: dts: Enable support for USB 3.0 PHY controller for exynos5420
Add device tree nodes for USB 3.0 PHY present alongwith
USB 3.0 controller Exynos 5420 SoC. This phy driver is
based on generic phy framework.
Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Rahul Sharma [Thu, 15 May 2014 20:23:21 +0000 (05:23 +0900)]
ARM: dts: enable hdmi for exynos5420-peach-pit board
Enable hdmi for exynos5420 based peach-pit board.
Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Acked-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Rahul Sharma [Thu, 15 May 2014 20:23:16 +0000 (05:23 +0900)]
ARM: dts: change to correct compatible string for exynos5420 hdmi
Replace compatible string for HDMI node in Exynos5420. Since
latest restructring in Drm hdmi driver, it is agreed to use
a seperate compatible string for Exynos5420 HDMI IP siince it
uses APB mapped Phy.
Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Acked-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Rahul Sharma [Thu, 15 May 2014 20:22:41 +0000 (05:22 +0900)]
ARM: dts: enable hdmi for exynos5250 based snow board
Enable support for HDMI for exynos5250 based Snow board.
Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Acked-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Olof Johansson [Fri, 16 May 2014 23:07:37 +0000 (16:07 -0700)]
Merge tag 'socfpga-dt-updates-for-3.16_v3' of git://git.rocketboards.org/linux-socfpga-next into next/dt
Merge "dts: socfpga: general updates for the socfpga platform" from Dinh
Nguyen:
Mostly DTS additions to the SOCFPGA platform from Steffan Trumtrar, and a
couple of device tree documentation updates/typo fix.
This one does not the GPIO binding patch, as that is pending further
discussion. Also, v3 fixes a rebase artifact and compile tested.
* tag 'socfpga-dt-updates-for-3.16_v3' of git://git.rocketboards.org/linux-socfpga-next:
ARM: socfpga: dts: Add div-reg to the main_pll clocks
ARM: socfpga: dts: add reset-controller
Documentation: dt: reset: move socfpga-reset
Documentation: dt: socfpga: add reset-cells property
ARM: socfpga: dts: Add DTS entries for USB
ARM: socfpga: dts: Remove hard coded clock-frequency property
ARM: socfpga: dts: add eeprom and rtc on i2c0
ARM: socfpga: dts: convert to preprocessor includes
ARM: socfpga: dts: add rtc on i2c0 to socrates
ARM: socfpga: dts: add support for EBV SOCrates
ARM: socfpga: dts: add can0+1
ARM: socfpga: dts: add i2c busses
ARM: socfpga: dts: add remaining interrupts for pdma
ARM: socfpga: dts: fix pdma interrupt
Signed-off-by: Olof Johansson <olof@lixom.net>
Fabio Estevam [Tue, 13 May 2014 01:04:24 +0000 (22:04 -0300)]
ARM: dts: imx35-pdk: Fix memory region description
On imx35pdk there are two DRAM chip selects that are used:
CS0 at 0x80000000
CS1 at 0x90000000
Each bank is connected to 128MB of DRAM, giving a total of 256MB of system DRAM.
Fix the memory layout to describe the hardware appropriately.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Sat, 10 May 2014 15:47:35 +0000 (12:47 -0300)]
ARM: dts: imx51-eukrea-mbimxsd51-baseboard: Add CAN support
Add support for CAN based on a MCP2515 connected to ECSPI1.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Iain Paton [Fri, 9 May 2014 15:02:11 +0000 (16:02 +0100)]
ARM: dts: imx6: add new board RIoTboard
add element14s RIoTboard http://www.riotboard.org which is an i.MX6Solo
based design targeted at makers.
Signed-off-by: Iain Paton<ipaton0@gmail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Iain Paton [Fri, 9 May 2014 15:01:56 +0000 (16:01 +0100)]
ARM: dts: imx6: i2c4 cleanup
add missing i2c4 clock and correct the compatible string to match other
imx6 i2c blocks
Signed-off-by: Iain Paton<ipaton0@gmail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Silvio Fricke [Thu, 17 Apr 2014 13:28:06 +0000 (15:28 +0200)]
ARM: dts: imx6: edmqmx6: add vcc and vio power supplies to stmpe
Signed-off-by: Silvio Fricke <silvio.fricke@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Sascha Hauer [Fri, 9 May 2014 06:11:19 +0000 (08:11 +0200)]
ARM: dts: Karo TX25: use hardware ecc
We should use hardware ecc on i.MX. While at it, add the optional
nand-bus-width property.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Sascha Hauer [Fri, 9 May 2014 11:59:55 +0000 (19:59 +0800)]
ARM: dts: Karo TX25: Add phy reset gpio and supply for FEC
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Sascha Hauer [Fri, 9 May 2014 06:11:17 +0000 (08:11 +0200)]
ARM: dts: Karo TX25: Add pinctrl nodes
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Sascha Hauer [Fri, 9 May 2014 06:11:16 +0000 (08:11 +0200)]
ARM: dts: i.MX25: Add IRAM node
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Sascha Hauer [Fri, 9 May 2014 06:11:14 +0000 (08:11 +0200)]
ARM: dts: i.MX25: Add mmc aliases
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Sascha Hauer [Thu, 8 May 2014 06:17:30 +0000 (08:17 +0200)]
ARM: dts: i.MX51 babbage: Fix FEC pad ctrl settings
The dts relied on the FEC pad ctrl settings from the bootloader by
using the NO_PAD_CTRL option. This breaks once the bootloader starts
initializing the pad ctrl settings from the same dts file. Change
to real pad ctrl settings taken from the platform based babbage
support.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Thu, 8 May 2014 14:10:56 +0000 (11:10 -0300)]
ARM: dts: imx6qdl-sabresd: Add USDHC4 support
USDHC4 is connected to a DDR MMC. Add support for it.
Signed-off-by: Dong Aisheng <b29396@freescale.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Russell King [Fri, 18 Apr 2014 10:01:27 +0000 (11:01 +0100)]
ARM: imx: add HDMI support for SolidRun HummingBoard and Cubox-i
Add the HDMI DT configuration for the SolidRun HummingBoard and Cubox-i.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Lucas Stach [Wed, 7 May 2014 18:09:05 +0000 (20:09 +0200)]
ARM: dts: imx6: edmqmx6: add SPI bus and flash
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Lucas Stach [Wed, 7 May 2014 18:09:04 +0000 (20:09 +0200)]
ARM: dts: imx6: edmqmx6: add pinctrl for pfuze irq gpio
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Tue, 6 May 2014 16:34:19 +0000 (13:34 -0300)]
ARM: dts: imx6q-udoo: Add HDMI support
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Sascha Hauer [Wed, 7 May 2014 13:19:00 +0000 (15:19 +0200)]
ARM: dts: Add stdout-path property to i.MX boards
This adds the stdout-path property to various i.MX boards. Values
of the property have been taken from barebox, so they should be
correct. Also, the older linux,stdout-path property is converted
to stdout-path.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Tim Harvey [Thu, 1 May 2014 06:34:04 +0000 (23:34 -0700)]
ARM: dts: imx: Fix LVDS mapping for Ventana GW52xx
The GW52xx supports LVDS on channel 0. Remove the obsolete crtcs node and
add display timings for the HanStar HSD100PXN1 display.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Tim Harvey [Thu, 1 May 2014 06:32:30 +0000 (23:32 -0700)]
ARM: dts: imx: add LVDS backlight for Ventana
The GW54xx/GW53xx/GW52xx all support LVDS with a PWM controlled backlight.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Lucas Stach [Wed, 30 Apr 2014 10:47:09 +0000 (12:47 +0200)]
ARM: dts: imx6qdl-sabresd: remove power-on gpio from pcie
This isn't compatible with the new binding and should be
handled via a proper regulator. It shouldn't be needed as
the driver has always ignored this property.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Lucas Stach [Wed, 30 Apr 2014 05:58:15 +0000 (13:58 +0800)]
ARM: dts: imx6: update pcie to bring in line with new binding
The new bindings drops one clock, renames the others and
drops the old interrupt mapping.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Tue, 29 Apr 2014 04:59:36 +0000 (01:59 -0300)]
ARM: dts: imx53-qsb-common: Add TVE support
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Alexander Shiyan [Sat, 26 Apr 2014 04:52:11 +0000 (08:52 +0400)]
ARM: dts: imx27-phytec-phycore-rdk: Fix "reg" property for USBH2 PHY
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Alexander Shiyan [Sat, 26 Apr 2014 04:52:10 +0000 (08:52 +0400)]
ARM: dts: imx27-phytec-phycore-rdk: Add CSI enable switch
This patch adds a GPIO fixed regulator which used on RDK to
enable CSI bus.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Alexander Shiyan [Sat, 26 Apr 2014 04:52:09 +0000 (08:52 +0400)]
ARM: dts: imx: Remove excess entries for PMIC
This patch removes excess "#address-cells" and "#size-cells" entries
for PMIC, since these entries is not used.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Alexander Shiyan [Sat, 26 Apr 2014 04:52:08 +0000 (08:52 +0400)]
ARM: dts: imx27-phytec-phycore-som: Disable PM pins for USB OTG
USB PWR and OC pins are used as GPIOs for different purposes,
so add "disable-over-current" property for OTG node to indicate this.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Alexander Shiyan [Sat, 26 Apr 2014 04:52:07 +0000 (08:52 +0400)]
ARM: dts: imx27-phytec-phycore-som: Fix active level for FEC reset
FEC reset GPIO is active low. Fix this typo.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Alexander Shiyan [Sat, 26 Apr 2014 04:52:06 +0000 (08:52 +0400)]
ARM: dts: imx27-phytec-phycore-rdk: Remove duplicate entries for USB PHY
"compatible", "#address-cells" and "#size-cells" for USB PHY are
already described in the SOM DTS. Remove these duplicate entries.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Tim Harvey [Wed, 23 Apr 2014 07:47:51 +0000 (00:47 -0700)]
ARM: dts: ventana: Add HDMI support
Configure ddc and enable HDMI
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Marek Vasut [Mon, 21 Apr 2014 20:56:49 +0000 (22:56 +0200)]
ARM: dts: imx6qdl-sabresd: Add PCIe support
Add support for the PCI express bus available on MX6 SabreSDP.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Tue, 22 Apr 2014 14:26:22 +0000 (11:26 -0300)]
ARM: dts: imx6qdl-wandboard: Add HDMI support
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Tue, 22 Apr 2014 13:04:59 +0000 (10:04 -0300)]
ARM: dts: imx6qdl-sabresd: Add HDMI support
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Thu, 17 Apr 2014 18:23:31 +0000 (15:23 -0300)]
ARM: dts: imx27-pdk: Add keypad support
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Thu, 17 Apr 2014 18:23:30 +0000 (15:23 -0300)]
ARM: dts: imx27-pdk: Add NAND support
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Philipp Zabel [Wed, 16 Apr 2014 21:23:50 +0000 (23:23 +0200)]
ARM: dts: imx6q-gk802: Enable HDMI
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Wed, 16 Apr 2014 17:53:20 +0000 (14:53 -0300)]
ARM: dts: imx27-pdk: Add USB OTG support
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Wed, 16 Apr 2014 17:53:19 +0000 (14:53 -0300)]
ARM: dts: imx27: Place the usb phy nodes in the board dts files
It is not a good approach to have the USB PHY nodes inside imx27.dtsi since
the USB PHYs on mx27 are not internal to the SoC.
Place the USB PHY nodes in the board dts files instead.
Also, each board may have a different clock source for the USB PHY, so do not
hardcode it.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Wed, 16 Apr 2014 17:53:18 +0000 (14:53 -0300)]
ARM: dts: imx27: Use the correct usb clock gate
USB Host1, Host2 and OTG are gated via 'usb_ipg_gate' clock, so fix it in order
to avoid the following kernel oops:
usbcore: registered new interface driver usb-storage
10024000.usb supply vbus not found, using dummy regulator
Unhandled fault: external abort on non-linefetch (0x808) at 0xf4424184
Internal error: : 808 [#1] PREEMPT ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted
3.15.0-rc1-26325-g971f9fd-dirty #64
task:
c7829aa0 ti:
c7836000 task.ti:
c7836000
PC is at ci_hdrc_probe+0x3a4/0x634
LR is at ci_hdrc_probe+0x100/0x634
pc : [<
c036cc78>] lr : [<
c036c9d4>] psr:
60000013
sp :
c7837d48 ip :
00000001 fp :
00000000
r10:
00000000 r9 :
00000000 r8 :
c791b6c0
r7 :
c7945000 r6 :
f4424000 r5 :
c7945010 r4 :
c794e010
r3 :
f4424184 r2 :
00000000 r1 :
8c000004 r0 :
0c000004
Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel
Control:
0005317f Table:
a0004000 DAC:
00000017
Process swapper (pid: 1, stack limit = 0xc78361c0)
Stack: (0xc7837d48 to 0xc7838000)
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Wed, 16 Apr 2014 11:25:56 +0000 (08:25 -0300)]
ARM: dts: imx27-phytec-phycore-som: Move PMIC IRQ GPIO into a separate pin group
The hardware is better described if we place the PMIC IRQ GPIO into its own
pingroup.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Tue, 15 Apr 2014 21:55:12 +0000 (18:55 -0300)]
ARM: dts: imx27-pdk: Add PMIC support
imx27-pdk has a MC13783 PMIC connected to CSPI2 port.
Add support for it.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Alexander Shiyan [Wed, 16 Apr 2014 07:24:57 +0000 (11:24 +0400)]
ARM: dts: imx51-babbage: Use predefined constants for clock definition
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Alexander Shiyan [Wed, 16 Apr 2014 07:24:56 +0000 (11:24 +0400)]
ARM: dts: imx51-babbage: Add devicetree node for I2C1
This patch adds devicetree node and pinctrl group for I2C1.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Alexander Shiyan [Wed, 16 Apr 2014 07:24:55 +0000 (11:24 +0400)]
ARM: dts: imx51-babbage: Sort nodes by name
This patch sorts nodes by name and moves "iomux" configuration at
the bottom of file.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Alexander Shiyan [Wed, 16 Apr 2014 07:24:54 +0000 (11:24 +0400)]
ARM: dts: imx51-babbage: Add USB OTG regulator node
This patch adds a regulator node and pinctrl group for USB OTG.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Alexander Shiyan [Wed, 16 Apr 2014 07:24:53 +0000 (11:24 +0400)]
ARM: dts: imx51-babbage: Use predefined constants for keys definition
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Alexander Shiyan [Wed, 16 Apr 2014 07:24:52 +0000 (11:24 +0400)]
ARM: dts: imx51-babbage: Add missing pingroup for PMIC
This patch adds missing pin definition for PMIC IRQ GPIO.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Alexander Shiyan [Wed, 16 Apr 2014 07:24:51 +0000 (11:24 +0400)]
ARM: dts: imx51-babbage: Move "hog" pins into corresponded pin groups
Move "hog" pins into corresponded pin groups for eSDHC1, eSDHC2,
eCSPI1, gpio-keys, regulator-fixed and codec clock.
Additionally, this patch fixes GPIO active level definition for
USB regulator.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Alexander Shiyan [Wed, 16 Apr 2014 07:24:50 +0000 (11:24 +0400)]
ARM: dts: i.MX51: Allow to define partitions onto NFC
This patch allow to define partitions onto NFC in user defined
devicetrees.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Philipp Zabel [Mon, 14 Apr 2014 15:37:32 +0000 (17:37 +0200)]
ARM: dts: pbab01: Enable DVI
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Philipp Zabel [Mon, 14 Apr 2014 15:37:31 +0000 (17:37 +0200)]
ARM: dts: pbab01: Enable UART1
This patch enables UART1 on the phyFLEX connector (i.MX6 uart3).
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Philipp Zabel [Mon, 14 Apr 2014 15:37:30 +0000 (17:37 +0200)]
ARM: dts: pfla02: Add UART1 (uart3)
The pins labeled UART1 on the module connector are wired to i.MX6 uart3.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Philipp Zabel [Mon, 14 Apr 2014 15:37:29 +0000 (17:37 +0200)]
ARM: dts: pbab01: Add I2C devices
This patch adds the TLV320, STMPE811, RTC8564, and MX1037 ICs to the I2C2 bus.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Philipp Zabel [Mon, 14 Apr 2014 15:37:28 +0000 (17:37 +0200)]
ARM: dts: pbab01: Add I2C2 and I2C3
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Philipp Zabel [Mon, 14 Apr 2014 15:37:27 +0000 (17:37 +0200)]
ARM: dts: pbab01: Set linux,stdout-path to UART4
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Philipp Zabel [Mon, 14 Apr 2014 15:37:26 +0000 (17:37 +0200)]
ARM: dts: pfla02: PHY reset is active-low
Note that the fec driver code currently hard-codes an active-low
reset, regardless of the flags in the device tree.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Philipp Zabel [Mon, 14 Apr 2014 15:37:25 +0000 (17:37 +0200)]
ARM: dts: pfla02: Add GPIO LEDs
This patch enables the red and green GPIO LEDs on Phytec phyFLEX i.MX6 modules.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Philipp Zabel [Mon, 14 Apr 2014 15:37:24 +0000 (17:37 +0200)]
ARM: dts: Add Phytec pbab01 with i.MX6 DualLite/Solo
The PBA-B-01 carrier board can be equipped with either Quad or DualLite/Solo
phyFLEX i.MX6 modules (PFL-A-02).
This moves all common devices into imx6qdl-phytec-pbab01.dtsi. The SoC specific
device trees then just include the pfla01 and pbab01 dtsi files corresponding
to the SoC variant.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Philipp Zabel [Mon, 14 Apr 2014 15:37:23 +0000 (17:37 +0200)]
ARM: dts: Add Phytec pfla02 with i.MX6 DualLite/Solo
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Sun, 13 Apr 2014 14:48:43 +0000 (11:48 -0300)]
ARM: dts: imx27-pdk: Pass the FEC pin configuration
Provide an entry for the FEC pin muxing.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Sun, 13 Apr 2014 14:48:42 +0000 (11:48 -0300)]
ARM: dts: imx27-pdk: Pass the UART1 pin configuration
Provide an entry for the UART1 pin muxing.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Sun, 13 Apr 2014 14:48:41 +0000 (11:48 -0300)]
ARM: dts: imx27-pdk: Keep the dt nodes sorted
For better readability keep the dt nodes sorted.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Alexander Shiyan [Sat, 12 Apr 2014 05:29:05 +0000 (09:29 +0400)]
ARM i.MX51: Add Digi ConnectCore devicetree
This patch adds support for Digi ConnectCore® i.MX51/Wi-i.MX51 SOM
and basic support for the ConnectCore for i.MX51 JumpStart Kit.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Alexander Shiyan [Wed, 9 Apr 2014 15:08:16 +0000 (19:08 +0400)]
ARM: dts: i.MX: Use single naming style for i.MX WEIM device
This patch converts all i.MX WEIM users to use single naming style
for devices.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Denis Carikli [Tue, 8 Apr 2014 16:22:42 +0000 (18:22 +0200)]
ARM: dts: cpuimx51 Add touchscreen support.
Signed-off-by: Denis Carikli <denis@eukrea.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Denis Carikli [Tue, 8 Apr 2014 16:22:41 +0000 (18:22 +0200)]
ARM: dts: cpuimx35 Add touchscreen support.
Signed-off-by: Denis Carikli <denis@eukrea.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Denis Carikli [Mon, 7 Apr 2014 16:04:00 +0000 (18:04 +0200)]
ARM: dts: mbimxsd51 baseboard: Add USB support.
Signed-off-by: Denis Carikli <denis@eukrea.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Stefan Agner [Thu, 3 Apr 2014 15:47:10 +0000 (17:47 +0200)]
ARM: dts: add initial Colibri VF61 board support
Add initial Toradex Colibri VF61 board support. Ethernet, UART
and SDHC cards are working. Cache latencies need to be a bit
higher than vf610.dtsi suggests. Those values are validated
by running multiple memory tests.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Stefan Agner [Thu, 3 Apr 2014 15:47:09 +0000 (17:47 +0200)]
of: add vendor prefix for Toradex AG
Adds toradex to the list of DT vendor prefixes.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Wed, 2 Apr 2014 22:25:44 +0000 (19:25 -0300)]
ARM: dts: imx27-pdk: Pass the memory range
imx27-pdk has 128 MB of DRAM. Pass the memory range in dt.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
This page took 0.045462 seconds and 5 git commands to generate.