Sage Weil [Tue, 22 Dec 2009 05:04:26 +0000 (21:04 -0800)]
ceph: only unregister registered bdi
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Tue, 22 Dec 2009 04:40:34 +0000 (20:40 -0800)]
ceph: do not touch_caps while iterating over caps list
Avoid confusing iterate_session_caps(), flag the session while we are
iterating so that __touch_cap does not rearrange items on the list.
All other modifiers of session->s_caps do so under the protection of
s_mutex.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Tue, 22 Dec 2009 00:02:37 +0000 (16:02 -0800)]
ceph: fix incremental osdmap pg_temp decoding bug
An incremental pg_temp wasn't being decoded properly (wrong bound on
for loop).
Also remove unused local variable, while we're at it.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Mon, 21 Dec 2009 22:49:37 +0000 (14:49 -0800)]
ceph: fix error paths for corrupt osdmap messages
Both osdmap_decode() and osdmap_apply_incremental() should never return
NULL.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Mon, 21 Dec 2009 19:48:44 +0000 (11:48 -0800)]
ceph: do not drop lease during revalidate
We need to hold session s_mutex for __ceph_mdsc_drop_dentry_lease(), which
we don't, so skip it. It was purely an optimization.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Mon, 21 Dec 2009 19:42:18 +0000 (11:42 -0800)]
ceph: ensure rename target dentry fails revalidation
This works around a bug in vfs_rename_dir() that rehashes the target
dentry. Ensure such dentries always fail revalidation by timing out the
dentry lease and kicking it out of the current directory lease gen.
This can be reverted when the vfs bug is fixed.
Signed-off-by: Sage Weil <sage@newdream.net>
Yehuda Sadeh [Fri, 18 Dec 2009 21:51:57 +0000 (13:51 -0800)]
ceph: writeback congestion control
Set bdi congestion bit when amount of write data in flight exceeds adjustable
threshold.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
Yehuda Sadeh [Wed, 16 Dec 2009 22:51:06 +0000 (14:51 -0800)]
ceph: writepage grabs and releases inode
Fixes a deadlock that is triggered due to kswapd,
while the page was locked and the iput couldn't tear
down the address space.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Yehuda Sadeh [Wed, 16 Dec 2009 22:22:17 +0000 (14:22 -0800)]
ceph: remove unaccessible code
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Sage Weil [Tue, 15 Dec 2009 22:44:32 +0000 (14:44 -0800)]
ceph: include link to bdi in debugfs
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Tue, 15 Dec 2009 18:27:48 +0000 (10:27 -0800)]
ceph: make mds ops interruptible
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Fri, 11 Dec 2009 17:48:05 +0000 (09:48 -0800)]
ceph: plug leak of incoming message during connection fault/close
If we explicitly close a connection, or there is a socket error, we need
to drop any partially received message.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Mon, 14 Dec 2009 23:13:47 +0000 (15:13 -0800)]
ceph: hex dump corrupt server data to KERN_DEBUG
Also, print fsid using standard format, NOT hex dump.
Signed-off-by: Sage Weil <sage@newdream.net>
Yehuda Sadeh [Tue, 15 Dec 2009 17:50:36 +0000 (09:50 -0800)]
ceph: fix msgpool reservation leak
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Sage Weil [Mon, 14 Dec 2009 22:58:11 +0000 (14:58 -0800)]
ceph: don't save sent messages on lossy connections
For lossy connections we drop all state on socket errors, so there is no
reason to keep sent ceph_msg's around.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Mon, 14 Dec 2009 22:56:56 +0000 (14:56 -0800)]
ceph: detect lossy state of connection
The server indicates whether a connection is lossy; set our LOSSYTX bit
appropriately. Do not set lossy bit on outgoing connections.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Mon, 14 Dec 2009 22:30:34 +0000 (14:30 -0800)]
ceph: plug msg leak in con_fault
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Mon, 14 Dec 2009 22:04:30 +0000 (14:04 -0800)]
ceph: carry explicit msg reference for currently sending message
Carry a ceph_msg reference for connection->out_msg. This will allow us to
make out_sent optional.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Fri, 11 Dec 2009 16:55:23 +0000 (08:55 -0800)]
ceph: fix leak of monc mutex
Fix leak of monc mutex on ENOMEM or bad fsid when receiving new mon map.
Audited all other users.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Wed, 9 Dec 2009 20:34:01 +0000 (12:34 -0800)]
ceph: do not feed bad device ids to crush
Do not feed bad (large) device ids to CRUSH.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Mon, 7 Dec 2009 23:55:05 +0000 (15:55 -0800)]
ceph: use kref for ceph_msg
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Mon, 7 Dec 2009 21:37:03 +0000 (13:37 -0800)]
ceph: use kref for ceph_osd_request
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Mon, 7 Dec 2009 20:31:09 +0000 (12:31 -0800)]
ceph: use kref for struct ceph_mds_request
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Mon, 7 Dec 2009 20:17:17 +0000 (12:17 -0800)]
ceph: simplify ceph_buffer interface
We never allocate the ceph_buffer and buffer separtely, so use a single
constructor.
Disallow put on NULL buffer; make the caller check.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Sat, 5 Dec 2009 18:13:33 +0000 (10:13 -0800)]
ceph: use kref for ceph_buffer
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Fri, 4 Dec 2009 18:27:17 +0000 (10:27 -0800)]
ceph: mark v0.18 release
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Thu, 3 Dec 2009 23:04:08 +0000 (15:04 -0800)]
ceph: update MAINTAINERS entry with correct git URL
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Wed, 2 Dec 2009 22:42:39 +0000 (14:42 -0800)]
ceph: allow preferred osd to be get/set via layout ioctl
There is certainly no reason not to report this.
The only real downside to allowing the user to set it is that you don't
get default values by zeroing the layout struct (the default is -1).
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Wed, 2 Dec 2009 19:54:25 +0000 (11:54 -0800)]
ceph: hide /.ceph from readdir results
We need to skip /.ceph in (cached) readdir results, and exclude "/.ceph"
from the cached ENOENT lookup check.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Tue, 1 Dec 2009 22:12:07 +0000 (14:12 -0800)]
ceph: whitespace cleanup
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Tue, 1 Dec 2009 20:23:54 +0000 (12:23 -0800)]
ceph: plug leak of request_mutex
Fix leak of osd client request_mutex on receiving dup ack.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Sat, 21 Nov 2009 21:08:14 +0000 (13:08 -0800)]
ceph: remove useless IS_ERR checks
ceph_lookup_snap_realm either returns a valid pointer or NULL; there is no
need to check IS_ERR(result).
Reported-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Sage Weil <sage@newdream.net>
Julia Lawall [Sat, 21 Nov 2009 15:53:16 +0000 (16:53 +0100)]
fs/ceph: Move a dereference below a NULL test
If the NULL test is necessary, then the dereference should be moved below
the NULL test.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/).
// <smpl>
@@
type T;
expression E;
identifier i,fld;
statement S;
@@
- T i = E->fld;
+ T i;
... when != E
when != i
if (E == NULL) S
+ i = E->fld;
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Sage Weil <sage@newdream.net>
Julia Lawall [Sat, 21 Nov 2009 11:53:08 +0000 (12:53 +0100)]
fs/ceph: introduce missing kfree
Error handling code following a kmalloc should free the allocated data.
The semantic match that finds this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@r exists@
local idexpression x;
statement S;
expression E;
identifier f,f1,l;
position p1,p2;
expression *ptr != NULL;
@@
x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
...
if (x == NULL) S
<... when != x
when != if (...) { <+...x...+> }
(
x->f1 = E
|
(x->f1 == NULL || ...)
|
f(...,x->f1,...)
)
...>
(
return \(0\|<+...x...+>\|ptr\);
|
return@p2 ...;
)
@script:python@
p1 << r.p1;
p2 << r.p2;
@@
print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Fri, 20 Nov 2009 22:44:18 +0000 (14:44 -0800)]
ceph: remove dead code
Left over from mount/auth protocol changes.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Fri, 20 Nov 2009 23:14:15 +0000 (15:14 -0800)]
ceph: reset msgr backoff during open, not after successful handshake
Reset the backoff delay when we reopen the connection, so that the delays
for any initial connection problems are reasonable. We were resetting only
after a successful handshake, which was of limited utility.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Fri, 20 Nov 2009 21:43:45 +0000 (13:43 -0800)]
ceph: reset requested max_size after mds reconnect
The max_size increase request to the MDS can get lost during an MDS
restart and reconnect. Reset our requested value after the MDS recovers,
so that any blocked writes will re-request a larger max_size upon waking.
Also, explicit wake session caps after the reconnect. Normally the cap
renewal catches this, but not in the cases where the caps didn't go stale
in the first place, which would leave writers waiting on max_size asleep.
Signed-off-by: Sage Weil <sage@newdream.net>
Yehuda Sadeh [Fri, 20 Nov 2009 21:59:13 +0000 (13:59 -0800)]
ceph: mount fails immediately on error
Signed-off-by: Yehuda Sadeh <yehuda@newdream.net>
Sage Weil [Thu, 19 Nov 2009 23:31:50 +0000 (15:31 -0800)]
ceph: decode updated mdsmap format
The mds map now uses the global_id as the 'key' (instead of the addr,
which was a poor choice).
This is protocol change.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Thu, 19 Nov 2009 00:50:41 +0000 (16:50 -0800)]
ceph: fix debugfs entry, simplify fsid checks
We may first learn our fsid from any of the mon, osd, or mds maps
(whichever the monitor sends first). Consolidate checks in a single
helper. Initialize the client debugfs entry then, since we need the
fsid (and global_id) for the directory name.
Also remove dead mount code.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Thu, 19 Nov 2009 00:50:55 +0000 (16:50 -0800)]
ceph: small cleanup in hash function
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Wed, 18 Nov 2009 23:08:44 +0000 (15:08 -0800)]
ceph: move mempool creation to ceph_create_client
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Thu, 19 Nov 2009 00:19:57 +0000 (16:19 -0800)]
ceph: negotiate authentication protocol; implement AUTH_NONE protocol
When we open a monitor session, we send an initial AUTH message listing
the auth protocols we support, our entity name, and (possibly) a previously
assigned global_id. The monitor chooses a protocol and responds with an
initial message.
Initially implement AUTH_NONE, a dummy protocol that provides no security,
but works within the new framework. It generates 'authorizers' that are
used when connecting to (mds, osd) services that simply state our entity
name and global_id.
This is a wire protocol change.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Wed, 18 Nov 2009 22:52:18 +0000 (14:52 -0800)]
ceph: handle errors during osd client init
Unwind initializing if we get ENOMEM during client initialization.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Wed, 18 Nov 2009 19:27:06 +0000 (11:27 -0800)]
ceph: remove unnecessary ceph_con_shutdown
We require that ceph_con_close be called before we drop the connection,
so this is unneeded. Just BUG if con->sock != NULL.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Wed, 18 Nov 2009 19:22:36 +0000 (11:22 -0800)]
ceph: remove bad calls to ceph_con_shutdown
We want to ceph_con_close when we're done with the connection, before
the ref count reaches 0. Once it does, do not call ceph_con_shutdown,
as that takes the con mutex and may sleep, and besides that is
unnecessary.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Thu, 12 Nov 2009 23:07:24 +0000 (15:07 -0800)]
ceph: fix page invalidation deadlock
We occasionally want to make a best-effort attempt to invalidate cache
pages without fear of blocking. If this fails, we fall back to an async
invalidate in another thread.
Use invalidate_mapping_pages instead of invalidate_inode_page2, as that
will skip locked pages, and not deadlock.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Thu, 12 Nov 2009 23:05:52 +0000 (15:05 -0800)]
ceph: build cleanly without CONFIG_DEBUG_FS
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Wed, 11 Nov 2009 23:50:12 +0000 (15:50 -0800)]
ceph: pr_info when mds reconnect completes
This helps the user know what's going on during the (involved) reconnect
process. They already see when the mds fails and reconnect starts.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Wed, 11 Nov 2009 23:22:37 +0000 (15:22 -0800)]
ceph: initialize i_size/i_rbytes on snapdir
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Wed, 11 Nov 2009 23:21:27 +0000 (15:21 -0800)]
ceph: exclude snapdir from readdir results
It was hidden from sync readdir, but not the cached dcache version.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Wed, 11 Nov 2009 00:02:23 +0000 (16:02 -0800)]
ceph: remove recon_gen logic
We don't get an explicit affirmative confirmation that our caps reconnect,
nor do we necessarily want to pay that cost. So, take all this code out
for now.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Tue, 10 Nov 2009 22:34:36 +0000 (14:34 -0800)]
ceph: separate banner and connect during handshake into distinct stages
We need to make sure we only swab the address during the banner once. So
break process_banner out of process_connect, and clean up the surrounding
code so that these are distinct phases of the handshake.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Mon, 9 Nov 2009 20:05:48 +0000 (12:05 -0800)]
ceph: do not confuse stale and dead (unreconnected) caps
We were using the cap_gen to track both stale caps (caps that timed out
due to temporarily losing touch with the mds) and dead caps that did not
reconnect after an MDS failure. Introduce a recon_gen counter to track
reconnections to restarted MDSs and kill dead caps based on that instead.
Rename gen to cap_gen while we're at it to make it more clear which is
which.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Sun, 8 Nov 2009 04:18:22 +0000 (20:18 -0800)]
ceph: make CRUSH hash function a bucket property
Make the integer hash function a property of the bucket it is used on. This
allows us to gracefully add support for new hash functions without starting
from scatch.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Sat, 7 Nov 2009 05:55:25 +0000 (21:55 -0800)]
ceph: make object hash a pg_pool property
The object will be hashed to a placement seed (ps) based on the pg_pool's
hash function. This allows new hashes to be introduced into an existing
object store, or selection of a hash appropriate to the objects that
will be stored in a particular pool.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Sat, 7 Nov 2009 00:44:05 +0000 (16:44 -0800)]
ceph: use strong hash function for mapping objects to pgs
We were using the (weak) dcache hash function, but it was leaving lower
bits consecutive for consecutive (inode) objects. We really want to make
the object to pg mapping random and uniform, so use a proper hash function
here.
This is Robert Jenkin's public domain hash function (with some minor
cleanup):
http://burtleburtle.net/bob/hash/evahash.html
This is a protocol revision.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Sat, 7 Nov 2009 00:39:26 +0000 (16:39 -0800)]
ceph: make CRUSH hash functions non-inline
These are way to big to be inline. I missed crush/* when doing the inline
audit for akpm's review.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Fri, 6 Nov 2009 21:57:49 +0000 (13:57 -0800)]
ceph: clean up 'osd%d down' console msg
No ceph prefix.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Wed, 4 Nov 2009 19:46:35 +0000 (11:46 -0800)]
ceph: convert port endianness
The port is informational only, but we should make it correct.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Wed, 4 Nov 2009 19:40:05 +0000 (11:40 -0800)]
ceph: fix sparse endian warning
Use the __le macro, even though for -1 it doesn't matter.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Wed, 4 Nov 2009 19:39:12 +0000 (11:39 -0800)]
ceph: fix endian conversions for ceph_pg
The endian conversions don't quite work with the old union ceph_pg. Just
make it a regular struct, and make each field __le. This is simpler and it
has the added bonus of actually working.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Tue, 3 Nov 2009 23:17:56 +0000 (15:17 -0800)]
ceph: use fixed endian encoding for ceph_entity_addr
We exchange struct ceph_entity_addr over the wire and store it on disk.
The sockaddr_storage.ss_family field, however, is host endianness. So,
fix ss_family endianness to big endian when sending/receiving over the
wire.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Mon, 2 Nov 2009 17:32:47 +0000 (09:32 -0800)]
ceph: init/destroy bdi in client create/destroy helpers
This keeps bdi setup/teardown in line with client life cycle.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Mon, 2 Nov 2009 01:53:24 +0000 (17:53 -0800)]
crush: always return a value from crush_bucket_choose
Even when we encounter a corrupt bucket. We still BUG(). This fixes
the warning
fs/ceph/crush/mapper.c: In function 'crush_choose':
fs/ceph/crush/mapper.c:352: warning: control may reach end of non-void function
'crush_bucket_choose' being inlined
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Mon, 2 Nov 2009 01:51:15 +0000 (17:51 -0800)]
ceph: fix uninitialized err variable
Fixes warning
fs/ceph/xattr.c: In function '__build_xattrs':
fs/ceph/xattr.c:353: warning: 'err' may be used uninitialized in this function
Signed-off-by: Sage Weil <sage@newdream.net>
Noah Watkins [Fri, 30 Oct 2009 19:57:30 +0000 (12:57 -0700)]
ceph: fix intra strip unit length calculation
Commit
645a102581b3639836b17d147c35d574fd6e8267 fixes calculation of object
offset for layouts with multiple stripes per object. This updates the
calculation of the length written to take into account multiple stripes per
object.
Signed-off-by: Noah Watkins <noah@noahdesu.com>
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Wed, 28 Oct 2009 22:15:05 +0000 (15:15 -0700)]
ceph: fix object striping calculation for non-default striping schemes
We were incorrectly calculationing of object offset. If we have multiple
stripe units per object, we need to shift to the start of the current
su in addition to the offset within the su.
Also rename bno to ono (object number) to avoid some variable naming
confusion.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Wed, 28 Oct 2009 21:57:25 +0000 (14:57 -0700)]
ceph: correct comment to match striping calculation
The object extent offset is the file offset _modulo_ the stripe unit.
The code was correct, the comment was wrong.
Reported-by: Noah Watkins <jayhawk@soe.ucsc.edu>
Signed-off-by: Sage Weil <sage@newdream.net>
Noah Watkins [Wed, 28 Oct 2009 21:04:48 +0000 (14:04 -0700)]
ceph: remove redundant use of le32_to_cpu
Using stripe unit size calculated and saved on the stack to avoid
a redundant call to le32_to_cpu.
Signed-off-by: Noah Watkins <noah@noahdesu.com>
Signed-off-by: Sage Weil <sage@newdream.net>
Noah Watkins [Wed, 28 Oct 2009 18:54:49 +0000 (11:54 -0700)]
ceph: replace list_entry with container_of
Usage of non-list.h list_entry function for container_of
functionality replaced with direct use of container_of.
Signed-off-by: Noah Watkins <noah@noahdesu.com>
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Tue, 27 Oct 2009 18:50:50 +0000 (11:50 -0700)]
ceph: allocate and parse mount args before client instance
This simplifies much of the error handling during mount. It also means
that we have the mount args before client creation, and we can initialize
based on those options.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Tue, 27 Oct 2009 17:19:28 +0000 (10:19 -0700)]
ceph: fix, clean up string mount arg parsing
Clearly demark int and string argument options, and do not try to convert
string arguments to ints.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Tue, 27 Oct 2009 05:06:22 +0000 (22:06 -0700)]
ceph: silence uninitialized variable warning
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Tue, 27 Oct 2009 05:07:53 +0000 (22:07 -0700)]
ceph: reduce parse_mount_args stack usage
Since we've increased the max mon count, we shouldn't put the addr array
on the parse_mount_args stack. Put it on the heap instead.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Thu, 22 Oct 2009 17:53:02 +0000 (10:53 -0700)]
ceph: remove small mon addr limit; use CEPH_MAX_MON where appropriate
Get rid of separate max mon limit; use the system limit instead. This
allows mounts when there are lots of mon addrs provided by mount.ceph (as
with a host with lots of A/AAAA records).
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Wed, 21 Oct 2009 18:21:49 +0000 (11:21 -0700)]
ceph: move directory size logic to ceph_getattr
We can't fill i_size with rbytes at the fill_file_size stage without
adding additional checks for directories. Notably, we want st_blocks
to remain 0 on directories so that 'du' still works.
Fill in i_blocks, i_size specially in ceph_getattr instead.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Mon, 19 Oct 2009 23:17:31 +0000 (16:17 -0700)]
ceph: v0.17 of client
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Mon, 19 Oct 2009 18:41:51 +0000 (11:41 -0700)]
ceph: include preferred osd in placement seed
Mix the preferred osd (if any) into the placement seed that is fed into
the CRUSH object placement calculation. This prevents all the placement
pgs from peering with the same osds.
Rev the osd client protocol with this change.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Fri, 16 Oct 2009 21:44:35 +0000 (14:44 -0700)]
ceph: enable readahead
Initialized bdi->ra_pages to enable readahead. Use 512KB default.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Fri, 16 Oct 2009 01:13:53 +0000 (18:13 -0700)]
ceph: move dirty caps code around
Cleanup only.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Thu, 15 Oct 2009 00:36:07 +0000 (17:36 -0700)]
ceph: warn on allocation from msgpool with larger front_len
Pass the front_len we need when pulling a message off a msgpool,
and WARN if it is greater than the pool's size. Then try to
allocate a new message (to continue without failing).
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Thu, 15 Oct 2009 00:26:40 +0000 (17:26 -0700)]
ceph: correct subscribe_ack msgpool payload size
Defined a struct for the SUBSCRIBE_ACK, and use that to size
the msgpool.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Wed, 14 Oct 2009 21:27:38 +0000 (14:27 -0700)]
ceph: flush dirty caps via the cap_dirty list
Previously we were flushing dirty caps by passing an extra flag
when traversing the delayed caps list. Besides being a bit ugly,
that can also miss caps that are dirty but didn't result in a
cap requeue: notably, mark_caps_dirty().
Separate the flushing into a separate helper, and traverse the
cap_dirty list.
This also brings i_dirty_item in line with i_dirty_caps: we are
on the list IFF caps != 0. We carry an inode ref IFF
dirty_caps|flushing_caps != 0.
Lose the unused return value from __ceph_mark_caps_dirty().
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Wed, 14 Oct 2009 21:24:19 +0000 (14:24 -0700)]
ceph: move generic flushing code into helper
Both callers of __mark_caps_flushing() do the same work; move it
into the helper.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Wed, 14 Oct 2009 21:09:07 +0000 (14:09 -0700)]
ceph: initialize sb->s_bdi, bdi_unregister after kill_anon_super
Writeback doesn't work without the bdi set, and writeback on
umount doesn't work if we unregister the bdi too early.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Wed, 14 Oct 2009 16:59:09 +0000 (09:59 -0700)]
ceph: convert encode/decode macros to inlines
This avoids the fugly pass by reference and makes the code a bit easier
to read.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Tue, 13 Oct 2009 19:55:26 +0000 (12:55 -0700)]
ceph: add version field to message header
This makes it easier for individual message types to indicate
their particular encoding, and make future changes backward
compatible.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Sat, 10 Oct 2009 04:52:34 +0000 (21:52 -0700)]
ceph: remove unused CEPH_MSG_{OSD,MDS}_GETMAP
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Mon, 12 Oct 2009 17:28:13 +0000 (10:28 -0700)]
ceph: ignore trailing data in monamp
This lets us extend the format more easily.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Fri, 9 Oct 2009 23:38:45 +0000 (16:38 -0700)]
ceph: add file layout validation
This tracks updates to code shared with userspace.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Fri, 9 Oct 2009 23:36:34 +0000 (16:36 -0700)]
ceph: update to mon client protocol v15
The mon request headers now include session_mon information that must
be properly initialized.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Fri, 9 Oct 2009 17:31:32 +0000 (10:31 -0700)]
ceph: cancel osd requests before resending them
This ensures we don't submit the same request twice if we are kicking a
specific osd (as with an osd_reset), or when we hit a transient error and
resend.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Fri, 9 Oct 2009 17:29:18 +0000 (10:29 -0700)]
ceph: reset osd session on fault, not peer_reset
The peer_reset just takes longer (until we reconnect and discover the osd
dropped the session... which it will).
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Fri, 9 Oct 2009 05:22:37 +0000 (22:22 -0700)]
ceph: fail gracefully on corrupt osdmap (bad pg_temp mapping)
Return an error and report a corrupt map instead of crying BUG().
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Thu, 8 Oct 2009 23:57:16 +0000 (16:57 -0700)]
ceph: revoke osd request message on request completion
If an osd has failed or returned and a request has been sent twice, it's
possible to get a reply and unregister the request while the request
message is queued for delivery. Since the message references the caller's
page vector, we need to revoke it before completing.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Thu, 8 Oct 2009 23:55:47 +0000 (16:55 -0700)]
ceph: fix osd request submission race
The osd request submission path registers the request, drops and retakes
the request_mutex, then sends it to the OSD. A racing kick_requests could
sent it during that interval, causing the same msg to be sent twice and
BUGing in the msgr.
Fix by only sending the message if it hasn't been touched by other
threads.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Thu, 8 Oct 2009 17:25:46 +0000 (10:25 -0700)]
ceph: renew mon subscription before it expires
Be conservative: renew subscription once half the interval has expired.
Do not reuse sub expiration to control hunting.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Wed, 7 Oct 2009 23:38:19 +0000 (16:38 -0700)]
ceph: fix mdsmap decoding when multiple mds's are present
A misplaced sizeof() around namelen was throwing things off.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Wed, 7 Oct 2009 17:59:34 +0000 (10:59 -0700)]
ceph: gracefully avoid empty crush buckets
This avoids a divide by zero when the input and/or map are
malformed.
Signed-off-by: Sage Weil <sage@newdream.net>
This page took 0.042622 seconds and 5 git commands to generate.