Jiong Wang [Wed, 27 Feb 2013 14:58:18 +0000 (14:58 +0000)]
gdb/
* regformats/reg-tilegx.dat (name): Change abi name to "tilegx".
* regformats/reg-tilegx32.dat: New.
gdbserver/
* Makefile.in (clean): Remove reg-tilegx.c, reg-tilegx32.c.
(reg-tilegx32.c): New rule.
* configure.srv (tilegx-*-linux*): Add reg-tilegx32.o to srv_regobj.
* linux-tile-low.c (tile_arch_setup): New function. Invoke
different register info initializer according to elf class.
(init_registers_tilgx32): New function. The tilegx32 register info
initializer.
(tile_fill_gregset): Use "uint_reg_t" to represent register size.
(tile_store_gregset): Likewise.
Jiong Wang [Wed, 27 Feb 2013 14:49:15 +0000 (14:49 +0000)]
gdb/
* configure.tgt (tilegx-*-linux*): Enable gdbserver.
Jiong Wang [Wed, 27 Feb 2013 14:47:13 +0000 (14:47 +0000)]
gdb/
* configure.tgt (tilegx-*-linux*): Replace whitespace with tab.
Yao Qi [Wed, 27 Feb 2013 13:31:38 +0000 (13:31 +0000)]
gdb/gdbserver/
* server.c (process_point_options): Print debug message when
debug_threads is true.
Alan Modra [Wed, 27 Feb 2013 12:40:15 +0000 (12:40 +0000)]
PR binutils/15191
* readelf.c (offsetof): Define.
(CHECK_ENTSIZE_VALUES): Remove extraneous indefinite article.
(process_corefile_note_segment): Allow notes without name or
desc. Combine out-of-range checks. Disallow "negative"
notesz or descsz.
Nick Clifton [Wed, 27 Feb 2013 11:15:39 +0000 (11:15 +0000)]
* scripttempl/elf32msp430.sc: Add placement of .data.* sections.
Add alignment of .bss section.
* scripttempl/elf32msp430_3.sc: Likewise.
Alan Modra [Wed, 27 Feb 2013 03:00:44 +0000 (03:00 +0000)]
* rl78-decode.opc (rl78_decode_opcode): Fix typo.
* rl78-decode.c: Regenerate.
Yao Qi [Wed, 27 Feb 2013 01:39:26 +0000 (01:39 +0000)]
gdb/
2013-02-27 Yao Qi <yao@codesourcery.com>
Pedro Alves <palves@redhat.com>
* tracepoint.c (tfile_trace_find): For tfind
pc/tp/range/outside, look for the next trace frame instead of
always starting from frame 0.
gdbadmin [Wed, 27 Feb 2013 00:00:04 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Tue, 26 Feb 2013 23:00:06 +0000 (23:00 +0000)]
daily update
Anthony Green [Tue, 26 Feb 2013 22:12:47 +0000 (22:12 +0000)]
Add moxie-*-rtems* support.
Anthony Green [Tue, 26 Feb 2013 22:07:55 +0000 (22:07 +0000)]
Tweak moxie-rtems triplet recognition
Nick Clifton [Tue, 26 Feb 2013 16:59:52 +0000 (16:59 +0000)]
PR binutils/15191
* binutils-all/readelf.n: Updare expected output from readelf.
* readelf.c (process_corefile_note_segment): Prevent attempts to
read beyond the end of the note buffer.
Yao Qi [Tue, 26 Feb 2013 14:11:58 +0000 (14:11 +0000)]
gdb/gdbserver/
* tracepoint.c (cmd_qtbuffer): Don't set '\0' in OWN_BUF.
Nick Clifton [Tue, 26 Feb 2013 13:06:51 +0000 (13:06 +0000)]
PR ld/15188
* ld.texinfo: Fix typos.
gdbadmin [Tue, 26 Feb 2013 00:00:37 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Mon, 25 Feb 2013 23:06:52 +0000 (23:06 +0000)]
daily update
Nick Clifton [Mon, 25 Feb 2013 18:41:06 +0000 (18:41 +0000)]
* rl78-decode.opc: Fix encoding of DIVWU insn.
* rl78-decode.c: Regenerate.
* config/rl78-parse.y: Fix encoding of DIVWU insn.
Pedro Alves [Mon, 25 Feb 2013 17:32:06 +0000 (17:32 +0000)]
Tweak warning output on Linux kernels with broken i386 NX support.
The "you have broken" bit of this text reads to me as if I had broken
it myself somehow. This patch eliminates that ambiguity.
2013-02-25 Pedro Alves <palves@redhat.com>
* common/linux-ptrace.c (linux_ptrace_test_ret_to_nx): Change
warning text.
xuepeng guo [Mon, 25 Feb 2013 02:53:41 +0000 (02:53 +0000)]
2013-02-25 Terry Guo <terry.guo@arm.com>
* config/tc-arm.c (arm_cpus): Add cortex-r7 entry.
* doc/c-arm.texi: Add cortex-r7 and missing cortex-r5 to
list of accepted CPUs.
gdbadmin [Mon, 25 Feb 2013 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Sun, 24 Feb 2013 23:00:05 +0000 (23:00 +0000)]
daily update
Maciej W. Rozycki [Sun, 24 Feb 2013 12:54:04 +0000 (12:54 +0000)]
* mips-tdep.c (mips32_scan_prologue): Reset frame_offset to zero
if $fp is used as the virtual frame pointer.
gdbadmin [Sun, 24 Feb 2013 00:00:36 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Sat, 23 Feb 2013 23:00:07 +0000 (23:00 +0000)]
daily update
gdbadmin [Sat, 23 Feb 2013 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Fri, 22 Feb 2013 23:24:24 +0000 (23:24 +0000)]
* elfread.c (elf_symtab_read): Do not use udata.p here to find
symbol size.
* ppc64-tdep.c (ppc64_elf_make_msymbol_special): New function.
* ppc64-tdep.h (ppc64_elf_make_msymbol_special): Declare.
* ppc-linux-tdep.c (ppc_linux_init_abi): Set up to use the above.
* ppcfbsd-tdep.c (ppcfbsd_init_abi): Likewise.
Alan Modra [Fri, 22 Feb 2013 23:00:06 +0000 (23:00 +0000)]
daily update
Jan Kratochvil [Fri, 22 Feb 2013 16:40:56 +0000 (16:40 +0000)]
gdb/
Code cleanup.
* elfread.c (build_id_bfd_get): Make the return type const.
(build_id_verify): Make the check parameter const.
(build_id_to_debug_filename): Make the build_id parameter and variable
data const.
(find_separate_debug_file_by_buildid): Make the variable build_id const.
H.J. Lu [Fri, 22 Feb 2013 01:20:48 +0000 (01:20 +0000)]
Set unique_global only for definition
bfd/
PR ld/15167
* elf64-ia64-vms.c (elf64_vms_link_add_object_symbols): Set
unique_global only for definition.
* elflink.c (_bfd_elf_merge_symbol): Don't set unique_global
here.
(elf_link_add_object_symbols): Set unique_global only
for definition.
ld/testsuite/
PR ld/15167
* ld-unique/unique.exp: Add a test for shared library with
reference.
gdbadmin [Fri, 22 Feb 2013 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Thu, 21 Feb 2013 23:00:05 +0000 (23:00 +0000)]
daily update
Tom Tromey [Thu, 21 Feb 2013 19:08:10 +0000 (19:08 +0000)]
* gdb.texinfo: Remove bad @syncodeindex.
(Values From Inferior, Types In Python, Inferiors In Python)
(Events In Python, Threads In Python, Frames In Python, Blocks In
Python, Symbols In Python, Symbol Tables In Python): Remove
@tables.
(Packets, General Query Packets, Tracepoint Packets)
(Host I/O Packets): Use @w{} for empty @item.
Alan Modra [Thu, 21 Feb 2013 05:10:28 +0000 (05:10 +0000)]
* scripttempl/elf.sc (.init_array, .fini_array): Don't sort all
.init_array/.fini_array input sections before .ctors/.dtors input
sections.
(CTORS_IN_INIT_ARRAY, DTORS_IN_INIT_ARRAY): Adjust to suit.
Alan Modra [Thu, 21 Feb 2013 04:35:22 +0000 (04:35 +0000)]
bfd/
* elf-bfd.h (struct elf_build_id): Extracted from..
(struct elf_build_id_info): ..here. Delete.
(struct output_elf_obj_tdata): New, extracted from..
(struct elf_obj_tdata): ..here. Reorganize for better packing.
Add "o" field.
(elf_program_header_size): Reference tdata->o.
(elf_seg_map, elf_next_file_pos, elf_eh_frame_hdr, elf_linker,
elf_stack_flags, elf_shstrtab, elf_strtab_sec, elf_shstrtab_sec,
elf_section_syms, elf_num_section_syms, elf_flags_init): Likewise.
* elf.c (bfd_elf_allocate_object): Allocate output_elf_obj_tdata
when opening bfd in any mode that might write.
(_bfd_elf_write_object_contents): Use build_id field in
output_elf_obj_tdata.
(_bfd_elf_close_and_cleanup): Tweak elf_shstrtab test.
(elfobj_grok_gnu_build_id): Adjust for elf_tdata changes.
gdb/
* elfread.c (build_id_bfd_get): Adjust for elf_tdata changes.
ld/
* emultempl/elf32.em (write_build_id, setup_build_id): Adjust
for elf_tdata changes.
Alan Modra [Thu, 21 Feb 2013 03:02:30 +0000 (03:02 +0000)]
* elf-bfd.h (struct core_elf_obj_tdata): New.
(struct elf_obj_tdata): Delete core_signal, core_pid, core_lwpid,
core_program, and core_command. Add "core".
* elf.c (bfd_elf_mkcorefile): Allocate "core" struct.
Update all refs to tdata core fields.
* elf32-am33lin.c, * elf32-arm.c, * elf32-cris.c, * elf32-frv.c,
* elf32-hppa.c, * elf32-i386.c, * elf32-m68k.c, * elf32-mips.c,
* elf32-nios2.c, * elf32-ppc.c, * elf32-s390.c, * elf32-score.c,
* elf32-score7.c, * elf32-sh.c, * elf32-sparc.c, * elf32-tilegx.c,
* elf32-tilepro.c, * elf32-xtensa.c, * elf64-aarch64.c,
* elf64-hppa.c, * elf64-mips.c, * elf64-ppc.c, * elf64-tilegx.c,
* elf64-x86-64.c, * elfcore.h, * elfn32-mips.c: Update all refs
to tdata core fields.
Alan Modra [Thu, 21 Feb 2013 02:29:11 +0000 (02:29 +0000)]
bfd/
* elf-bfd.h (struct elf_obj_tdata): Rename segment_map to seg_map.
Delete num_locals and num_globals.
(elf_num_locals, elf_num_globals): Don't define.
(elf_seg_map, elf_next_file_pos, elf_eh_frame_hdr, elf_linker,
elf_stack_flags, elf_strtab_sec, elf_shstrtab_sec): Define.
* bfd.c, * elf-eh-frame.c, * elf-nacl.c, * elf-vxworks.c, * elf.c,
* elf32-arm.c, * elf32-lm32.c, * elf32-ppc.c, * elf32-rx.c,
* elf32-spu.c, * elf64-hppa.c, * elfcode.h, * elflink.c,
* elfnn-ia64.c, * elfxx-mips.c: Use newly defined elf_obj_tdata
accessor macros.
* elf.c (elf_map_symbols): Add pnum_locals param. Return
number of locals syms via new param.
(swap_out_syms): Adjust to suit elf_map_symbols change.
ld/
* emultempl/elf-generic.em: Use newly defined elf_obj_tdata
accessor macros.
Siva Chandra Reddy [Thu, 21 Feb 2013 01:46:57 +0000 (01:46 +0000)]
Add a new method 'disassemble' to gdb.Architecture class.
* python/py-arch.c (archpy_disassmble): Implementation of the
new method gdb.Architecture.disassemble.
(arch_object_methods): Add entry for the new method.
* doc/gdb.texinfo (Architectures In Python): Add description
about the new method gdb.Architecture.disassemble.
* testsuite/gdb.python/py-arch.c: New test case
* testsuite/gdb.python/py-arch.exp: New tests to test
gdb.Architecture.disassemble
* testsuite/gdb.python/Makefile.in: Add py-arch to the list of
EXECUTABLES.
gdbadmin [Thu, 21 Feb 2013 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Wed, 20 Feb 2013 23:00:06 +0000 (23:00 +0000)]
daily update
Alan Modra [Wed, 20 Feb 2013 10:24:11 +0000 (10:24 +0000)]
* Makefile.am: Use $(ELF_DEPS) on a number of eelf*.c rules.
* Makefile.in: Regenerate.
Jiong Wang [Wed, 20 Feb 2013 07:45:14 +0000 (07:45 +0000)]
gdb/
* MAINTAINERS (Write After Approval): Add myself to the list.
gdbadmin [Wed, 20 Feb 2013 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Tue, 19 Feb 2013 23:00:05 +0000 (23:00 +0000)]
daily update
Maciej W. Rozycki [Tue, 19 Feb 2013 21:58:46 +0000 (21:58 +0000)]
* elfxx-mips.c (_bfd_mips_elf_finish_dynamic_symbol): Also clear
STO_MICROMIPS annotation.
Pedro Alves [Tue, 19 Feb 2013 20:52:57 +0000 (20:52 +0000)]
gdbserver:server.c - use unpack_varlen_hex to extract hex numbers.
Addresses, as most numbers in the RSP are hex encoded, with variable
length (that just means the width isn't specified, and there's no top
cap. So they should be extracted with unpack_varlen_hex.
A couple spots in server.c are using strto(u)l, which doesn't work on
LLP64 targets.
This patch fixes it.
Tested on x86_64 Fedora 17.
2013-02-19 Pedro Alves <palves@redhat.com>
Kai Tietz <ktietz@redhat.com>
PR gdb/15161
* server.c (handle_query) <CRC check>: Use unpack_varlen_hex
instead of strtoul to extract address from packet.
(process_serial_event) <'z'>: Likewise.
Pedro Alves [Tue, 19 Feb 2013 19:41:28 +0000 (19:41 +0000)]
Garbage collect struct monitor_ops::load_routine.
While touching monitor_load in a previous patch, I noticed this method
is no longer set to anything other than NULL in the tree, so we can
remove it.
Tested by building with --enable-targets=all.
2013-02-19 Pedro Alves <palves@redhat.com>
Garbage collect 'struct monitor_ops'::load_routine.
* monitor.h (struct monitor_ops) <load_routine>: Remove field.
* monitor.c (monitor_load): No longer call
current_monitor->load_routine.
* dbug-rom.c (init_dbug_cmds): Don't set 'load_routine'.
* m32r-rom.c (init_m32r_cmds): Don't set 'load_routine'.
* ppcbug-rom.c (init_ppc_cmds): Don't set 'load_routine'.
Pedro Alves [Tue, 19 Feb 2013 19:27:21 +0000 (19:27 +0000)]
Harmonize this monitor_load with generic_load.
Harmonize this old-looking code with generic_load, which fixes several
issues.
2013-02-19 Pedro Alves <palves@redhat.com>
PR gdb/15161
Harmonize with generic_load.
* monitor.c: Include "readline/readline.h".
(monitor_load): Rename parameter 'file' to 'args'. Use build_argv
instead of sscanf. Use CORE_ADDR/strtoulst instead of unsigned
long/strtol for the 'load_offset' local. Error out if no argument
is given or if too many arguments are given. Tilde expand the
passed in file name.
H.J. Lu [Tue, 19 Feb 2013 19:10:31 +0000 (19:10 +0000)]
Implement Intel SMAP instructions
gas/
PR gas/15159
* config/tc-i386.c (cpu_arch): Add ".smap".
* doc/c-i386.texi: Document smap.
gas/testsuite/
PR gas/15159
* gas/i386/i386.exp: Run smap and x86-64-smap.
* gas/i386/smap.d: New file.
* gas/i386/smap.s: likewise.
* gas/i386/x86-64-smap.d: likewise.
opcodes/
PR gas/15159
* i386-dis.c (rm_table): Add clac and stac to RM_0F01_REG_1.
* i386-gen.c (cpu_flag_init): Add CPU_SMAP_FLAGS.
(cpu_flags): Add CpuSMAP.
* i386-opc.h (CpuSMAP): New.
(i386_cpu_flags): Add cpusmap.
* i386-opc.tbl: Add clac and stac.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
Kai Tietz [Tue, 19 Feb 2013 18:31:49 +0000 (18:31 +0000)]
PR gdb/15161
* symfile.c (load_section_data): Change type of load_offset
to CORE_ADDR.
(generic_load): User strtoulst instead of strtoul for conversion
of load_offset.
Walter Lee [Tue, 19 Feb 2013 16:22:42 +0000 (16:22 +0000)]
* tilegx-tdep.c (tilegx_analyze_prologue): add check for
for return address, "lr" register, saved on stack.
* tilegx-tdep.c (tilegx_frame_cache): update "PC" reg
after we invoke tilegx_analyze_prologue.
Walter Lee [Tue, 19 Feb 2013 16:21:29 +0000 (16:21 +0000)]
* tilegx-tdep.c (itilegx_gdbarch_init): char type should be signed.
Walter Lee [Tue, 19 Feb 2013 16:20:47 +0000 (16:20 +0000)]
* tilegx-tdep.c (tilegx_skip_prologue): Use skip_prologue_using_sal.
Walter Lee [Tue, 19 Feb 2013 16:19:33 +0000 (16:19 +0000)]
* tilegx-tdep.c (INT_SWINT_1_SIGRETURN): New macro.
(tilegx_write_pc): New function.
(tilegx_cannot_reference_register): Return zero if REGNO
is TILEGX_FAULTNUM_REGNUM.
(tilegx_gdbarch_init): Add call to set_gdbarch_write_pc.
(tilegx_register_name): Add handling of "faultnum" register.
* tilegx-tdep.h (enum tilegx_regnum): Add TILEGX_FAULTNUM_REGNUM.
* tilegx-linux-tdep.c (tilegx_linux_supply_regset): Add
handling of TILEGX_FAULTNUM_REGNUM.
* tilegx-linux-nat.c (regmap): Add entry for TILEGX_FAULTNUM_REGNUM.
Walter Lee [Tue, 19 Feb 2013 16:09:13 +0000 (16:09 +0000)]
* tilegx-tdep.c (tilegx_push_dummy_call): args pushed on stack
should be aligned to 64bit.
Kai Tietz [Tue, 19 Feb 2013 15:46:32 +0000 (15:46 +0000)]
* windows-nat.c (windows_xfer_memory): Fix debug-output
for LLP64.
Lei Liu [Tue, 19 Feb 2013 07:50:30 +0000 (07:50 +0000)]
2013-02-19 Lei Liu <lei.liu2@windriver.com>
* mips-linux-nat.c (mips64_linux_regsets_store_registers):
Don't check DSP register number if HAVE_DSP is not set.
Lei Liu [Tue, 19 Feb 2013 07:01:07 +0000 (07:01 +0000)]
2013-02-19 Lei Liu <lei.liu2@windriver.com>
* MAINTAINERS (Write After Approval): Add myself to the list.
Sandra Loosemore [Tue, 19 Feb 2013 03:59:08 +0000 (03:59 +0000)]
2013-02-19 Sandra Loosemore <sandra@codesourcery.com>
PR ld/15146
ld/
* plugin.c (plugin_notice): Add null check before dereferencing
pointer.
Maciej W. Rozycki [Tue, 19 Feb 2013 01:10:06 +0000 (01:10 +0000)]
* lib/ld-lib.exp (run_ld_link_tests): Add another argument, pass
its contents to ar_simple_create and ld_simple_link after
objfiles.
* ld-aarch64/aarch64-elf.exp: Adjust accordingly.
* ld-alpha/alpha.exp: Likewise.
* ld-arm/arm-elf.exp: Likewise.
* ld-arm/export-class.exp: Likewise.
* ld-elf/comm-data.exp: Likewise.
* ld-elf/eh-group.exp: Likewise.
* ld-elf/elf.exp: Likewise.
* ld-elf/export-class.exp: Likewise.
* ld-elfvers/vers.exp: Likewise.
* ld-frv/tls.exp: Likewise.
* ld-i386/export-class.exp: Likewise.
* ld-i386/i386.exp: Likewise.
* ld-ia64/ia64.exp: Likewise.
* ld-libs/libs.exp: Likewise.
* ld-m68k/m68k.exp: Likewise.
* ld-metag/metag.exp: Likewise.
* ld-mips-elf/comm-data.exp: Likewise.
* ld-mips-elf/export-class.exp: Likewise.
* ld-mips-elf/mips-elf.exp: Likewise.
* ld-mn10300/mn10300.exp: Likewise.
* ld-pe/pe-compile.exp: Likewise.
* ld-pe/pe.exp: Likewise.
* ld-plugin/plugin.exp: Likewise.
* ld-powerpc/aix52.exp: Likewise.
* ld-powerpc/export-class.exp: Likewise.
* ld-powerpc/powerpc.exp: Likewise.
* ld-s390/s390.exp: Likewise.
* ld-sh/sh-vxworks.exp: Likewise.
* ld-sh/sh64/sh64.exp: Likewise.
* ld-sparc/sparc.exp: Likewise.
* ld-tic6x/tic6x.exp: Likewise.
* ld-tilegx/tilegx.exp: Likewise.
* ld-tilepro/tilepro.exp: Likewise.
* ld-undefined/entry.exp: Likewise.
* ld-vax-elf/vax-elf.exp: Likewise.
* ld-x86-64/dwarfreloc.exp: Likewise.
* ld-x86-64/export-class.exp: Likewise.
* ld-x86-64/x86-64.exp: Likewise.
* ld-xc16x/xc16x.exp: Likewise.
* ld-xstormy16/xstormy16.exp: Likewise.
* ld-xtensa/xtensa.exp: Likewise.
gdbadmin [Tue, 19 Feb 2013 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Mon, 18 Feb 2013 23:50:32 +0000 (23:50 +0000)]
include/
* bfdlink.h (struct bfd_link_info): Delete emit_note_gnu_build_id.
bfd/
* configure.in: Bump version to 2.23.52.
* elf-bfd.h (struct elf_build_id_info): New.
(struct elf_obj_tdata): Delete after_write_object_contents,
after_write_object_contents_info and build_id_size. Make build_id
a pointer to struct elf_build_id_info.
* elf.c (_bfd_elf_write_object_contents): Style. Update
after_write_ibject_contents invocation.
(elfobj_grok_gnu_build_id): Update for new build_id struct. Don't
allow zero size notes.
* configure: Regenerate.
gdb/
* elfread.c (struct build_id): Delete. Use struct elf_build_id
throughout file instead.
(build_id_bfd_get): Update to use new elf_tdata build_id field.
Don't xmalloc return value.
(build_id_verify): Similarly. Don't xfree.
(build_id_to_debug_filename): Update.
(find_separate_debug_file_by_buildid): Update, don't xfree.
ld/
* emultempl/elf32.em (emit_note_gnu_build_id): New static var.
Replace all info->emit_note_gnu_build_id refs.
(id_note_section_size): Rename from
gld${EMULATION_NAME}_id_note_section_size.
(struct build_id_info): Delete.
(write_build_id): Rename from
gld${EMULATION_NAME}_write_build_id_section.
Update elf_tdata usage. Style, formatting.
(setup_build_id): New function.
(gld${EMULATION_NAME}_after_open): Use setup_build_id.
Maciej W. Rozycki [Mon, 18 Feb 2013 23:35:17 +0000 (23:35 +0000)]
* ld-mips-elf/jalx-2.ld: Include .rel.plt in output, give .plt a
mapping.
* ld-mips-elf/jalx-2.dd: Adjust disassembly accordingly.
Maciej W. Rozycki [Mon, 18 Feb 2013 23:27:23 +0000 (23:27 +0000)]
* config/tc-mips.c (s_cpload): Call mips_mark_labels and set
mips_assembling_insn appropriately.
(s_cpsetup, s_cprestore, s_cpreturn, s_cpadd): Likewise.
Maciej W. Rozycki [Mon, 18 Feb 2013 23:20:45 +0000 (23:20 +0000)]
* elf64-mips.c (micromips_elf64_howto_table_rel): Add
R_MICROMIPS_SCN_DISP and R_MICROMIPS_JALR.
(micromips_elf64_howto_table_rela): Likewise.
(micromips_reloc_map): Add BFD_RELOC_MICROMIPS_JALR.
* elfn32-mips.c (elf_micromips_howto_table_rel): Add
R_MICROMIPS_SCN_DISP and R_MICROMIPS_JALR.
(elf_micromips_howto_table_rela): Likewise.
(micromips_reloc_map): Add BFD_RELOC_MICROMIPS_JALR.
Maciej W. Rozycki [Mon, 18 Feb 2013 23:18:16 +0000 (23:18 +0000)]
* elfxx-mips.c (MICROMIPS_P): New macro.
(_bfd_mips_elf_symbol_processing): Use it.
Maciej W. Rozycki [Mon, 18 Feb 2013 23:16:35 +0000 (23:16 +0000)]
* elfxx-mips.c (_bfd_mips_elf_create_dynamic_sections): Clarify
comment on _PROCEDURE_LINKAGE_TABLE_ creation.
Alan Modra [Mon, 18 Feb 2013 23:00:04 +0000 (23:00 +0000)]
daily update
Tom Tromey [Mon, 18 Feb 2013 21:04:28 +0000 (21:04 +0000)]
PR gdb/15102:
* dwarf2read.c (read_subrange_type): Use result of
'check_typedef'.
gdb/testsuite
* gdb.dwarf2/subrange.exp: New file.
Yao Qi [Mon, 18 Feb 2013 14:54:57 +0000 (14:54 +0000)]
gdb/gdbserver
* linux-bfin-low.c (the_low_target): Use NULL instead of 0.
Maciej W. Rozycki [Mon, 18 Feb 2013 14:02:47 +0000 (14:02 +0000)]
Fix ChangeLog typo.
Maciej W. Rozycki [Mon, 18 Feb 2013 14:02:02 +0000 (14:02 +0000)]
* config/tc-mips.c (append_insn): Correcting indentation, remove
extraneous braces.
Alan Modra [Mon, 18 Feb 2013 10:40:19 +0000 (10:40 +0000)]
PR ld/12549
* elf-bfd.h (_bfd_elf_strtab_clear_refs): Delete.
(_bfd_elf_strtab_clear_all_refs): Declare.
(_bfd_elf_strtab_resize): Declare.
* elf-strtab.c (_bfd_elf_strtab_clear_refs): Delete.
(_bfd_elf_strtab_clear_all_refs): New function.
(_bfd_elf_strtab_resize): Likewise.
* elflink.c (elf_link_add_object_symbols): Use _bfd_elf_strtab_resize.
Alan Modra [Mon, 18 Feb 2013 09:13:11 +0000 (09:13 +0000)]
* ld-plugin/lto.exp (Build pr15146b.so) Add -Wl,--no-as-needed.
(PR ld/15146 (1), (2)): Likewise.
(LTO 7): Likewise.
Alan Modra [Mon, 18 Feb 2013 04:44:16 +0000 (04:44 +0000)]
missed from last commit
Alan Modra [Mon, 18 Feb 2013 02:56:58 +0000 (02:56 +0000)]
* elf-bfd.h (struct elf_obj_tdata): Move find_line_info, local_stubs,
local_call_stubs, elf_data_symbol, elf_text_symbol, elf_data_section,
and elf_text_section to..
* elfxx-mips.c (struct mips_elf_obj_tdata): ..here. Update all refs.
* elf64-alpha.c (struct mips_elf_find_line): Rename to..
(struct alpha_elf_find_line): ..this.
(struct alpha_elf_obj_tdata): Add find_line_info, update refs.
gdbadmin [Mon, 18 Feb 2013 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Sun, 17 Feb 2013 23:00:06 +0000 (23:00 +0000)]
daily update
gdbadmin [Sun, 17 Feb 2013 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Sat, 16 Feb 2013 23:00:05 +0000 (23:00 +0000)]
daily update
H.J. Lu [Sat, 16 Feb 2013 17:54:37 +0000 (17:54 +0000)]
Don't add DT_NEEDED for references from the dummy bfd
bfd/
PR ld/15146
* elflink.c (elf_link_add_object_symbols): Don't add DT_NEEDED
for references from the dummy bfd.
ld/
PR ld/15146
* plugin.c (plugin_notice): Replace the undefined dummy bfd with
the real one.
ld/testsuite/
PR ld/15146
* ld-plugin/pr15146.d: New file.
* ld-plugin/pr15146a.c: Likewise.
* ld-plugin/pr15146b.c: Likewise.
* ld-plugin/pr15146c.c: Likewise.
* ld-plugin/pr15146d.c: Likewise.
* ld-plugin/lto.exp: Add tests for PR ld/15146.
H.J. Lu [Sat, 16 Feb 2013 17:50:20 +0000 (17:50 +0000)]
Also trace symbol from the IR bfd
PR ld/15141
* plugin.c (plugin_notice): Also trace symbol from the IR bfd.
H.J. Lu [Sat, 16 Feb 2013 17:48:57 +0000 (17:48 +0000)]
Also track weak references
PR ld/15149
* elflink.c (elf_link_add_object_symbols): Also track weak
references.
Yao Qi [Sat, 16 Feb 2013 08:57:48 +0000 (08:57 +0000)]
gdb/
2013-02-16 Yuanhui Zhang <asmwarrior@gmail.com>
* frame.c: Remove one extra white space after #include
directive.
gdbadmin [Sat, 16 Feb 2013 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Fri, 15 Feb 2013 23:00:05 +0000 (23:00 +0000)]
daily update
Jan Kratochvil [Fri, 15 Feb 2013 20:30:16 +0000 (20:30 +0000)]
gdb/
* contrib/cc-with-tweaks.sh: Extend the comment for -p option.
Jan Kratochvil [Fri, 15 Feb 2013 20:28:24 +0000 (20:28 +0000)]
gdb/
* gdb-gdb.gdb.in: Wrap set complaints, b internal_error, b info_command
and dir commands into an if block.
H.J. Lu [Fri, 15 Feb 2013 18:26:06 +0000 (18:26 +0000)]
Don't allow a nested archive pointing to itself
PR binutils/15151
* archive.c (_bfd_find_nested_archive): Don't allow a nested
archive pointing to itself.
(_bfd_get_elt_at_filepos): Revert the last 2 changes.
Yufeng Zhang [Fri, 15 Feb 2013 17:55:25 +0000 (17:55 +0000)]
* configure.ac: Sync with GCC repo.
* configure: Ditto.
Tom Tromey [Fri, 15 Feb 2013 17:12:29 +0000 (17:12 +0000)]
2013-02-15 Sanimir Agovic <sanimir.agovic@intel.com>
* python/py-breakpoint (struct pybp_code): Use int instead of
enum type_code.
Nick Clifton [Fri, 15 Feb 2013 15:53:42 +0000 (15:53 +0000)]
Allow for some recursion when scanning archives.
Ian Lance Taylor [Fri, 15 Feb 2013 15:44:03 +0000 (15:44 +0000)]
* options.h (DEFINE_uint64_alias): Define.
(class General_options): Add -Ttext-segment as an alias for
-Ttext.
Nick Clifton [Fri, 15 Feb 2013 14:54:28 +0000 (14:54 +0000)]
* metag-dis.c: Initialize outf->bytes_per_chunk to 4
which also makes the disassembler output be in little
endian like it should be.
* metag/labelarithmetic.d: Fix the expected disassembler
output to be in little endian format
* metag/metacore12.d: likewise
* metag/metacore21.d: likewise
* metag/metacore21ext.d: likewise
* metag/metadsp21.d: likewise
* metag/metadsp21ext.d: likewise
* metag/metafpu.d: likewise
* metag/metafpuext.d: likewise
* metag/tls.d: likewise
* ld-metag/pcrel.d: Fix the expected disassembler
output to be in little endian format
* ld-metag/shared.d: likewise
* ld-metag/stub.d: likewise
* ld-metag/stub_pic_app.d: likewise
* ld-metag/stub_pic_shared.d: likewise
* ld-metag/stub_shared.d: likewise
Nick Clifton [Fri, 15 Feb 2013 14:37:39 +0000 (14:37 +0000)]
PR binutils/15140
* ar.c (open_inarch): Fail on attempts to convert a normal archive
to a thin archive or vice versa.
* elfcomm.c (make_qualified_name): Handle corrupted thin
archives.
* readelf.c (process_archive): Likewise.
* doc/binutils.texi: Clarify documentation describing thin
archives.
* archive.c (_bfd_get_elt_at_filepos): Prevent an infinite loop
accessing a corrupt nested archive.
Kai Tietz [Fri, 15 Feb 2013 14:25:34 +0000 (14:25 +0000)]
* objcopy.c (copy_main): Initialize context variable.
Alan Modra [Fri, 15 Feb 2013 12:59:15 +0000 (12:59 +0000)]
* powerpc.cc (Stub_table::plt_off): New function, extracted from..
(Stub_table::do_write): ..here, two places.
(Stub_table::plt_call_size): Use it here too.
Kai Tietz [Fri, 15 Feb 2013 11:08:01 +0000 (11:08 +0000)]
* scripttempl/pep.sc (.xdata): Merge .xdata* into .xdata section.
(.pdata): Merge .pdata* into .pdata section.
Nick Clifton [Fri, 15 Feb 2013 10:07:47 +0000 (10:07 +0000)]
* gas/arm/neon-vmov-bad.d: New file.
* gas/arm/neon-vmov-bad.s: Likewise.
* gas/arm/neon-vmov-bad.l: Likewise.
* config/tc-arm.c (do_neon_mov): Break on NS_NULL.
Hafiz Abid Qadeer [Fri, 15 Feb 2013 09:47:50 +0000 (09:47 +0000)]
2013-02-15 Pedro Alves <pedro@codesourcery.com>
Hafiz Abid Qadeer <abidh@codesourcery.com>
gdb/
* NEWS: Mention new field "trace-file".
* tracepoint.c (trace_status_mi): Output "trace-file" field.
(tfile_open): Record the trace file's filename in the trace
status.
(tfile_files_info): Mention the name of the trace file.
Check the "filename" field explicitely.
(trace_status_command): Explicitely check "filename" field.
(trace_find_command): Ditto.
(trace_find_pc_command): Ditto.
(trace_find_tracepoint_command): Ditto.
(trace_find_line_command): Ditto.
(trace_find_range_command): Ditto.
(trace_find_outside_command): Ditto.
* tracepoint.h (struct trace_status) <from_file>: Rename it
to "filename" and make it hold the trace file's filename
instead of a boolean.
* remote.c (remote_get_trace_status): Initialize "filename"
field with NULL instead of 0.
gdb/doc/
* gdb.texinfo (GDB/MI Tracepoint Commands) <-trace-status>:
Document the "trace-file" field.
gdb/testsuite/
* gdb.trace/tfile.exp: Add test for -trace-status command.
This page took 0.041577 seconds and 4 git commands to generate.