Sudip Mukherjee [Thu, 4 Jun 2015 13:34:52 +0000 (19:04 +0530)]
staging: fbtft: fix out of bound access
str was 16 bytes but was mentioned as 128 in snprintf.
again msg is 128 bytes but not sufficient to hold the complete debug
message of register values.
Now removed the use of str, msg and print the register values from the
loop.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Madhusudhanan Ravindran [Mon, 1 Jun 2015 12:34:56 +0000 (12:34 +0000)]
staging: fbtft: replace fbtft_dev_dbg with standard dev_dbg call
This patch attempts to simplify the debugging using standard
dev_dbg call so that individual debug prints can be enabled or
disbled by dynamic debugging rather than using module params.
Signed-off-by: Madhusudhanan Ravindran <mravindr@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Abhishek Sharma [Mon, 1 Jun 2015 06:06:53 +0000 (06:06 +0000)]
Staging: comedi: adv_pci1724: Remove redundant return statements
Replace unnecessary conditional checks for variable 'ret' and replace
by single return statement.
Signed-off-by: Abhishek Sharma <asharm14@visteon.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joglekar Tejas [Mon, 1 Jun 2015 04:14:51 +0000 (09:44 +0530)]
Staging: comedi: ni_at_a2150: remove extra spaces before tab
This patch fix warning given by checkpatch.pl abouts spaces given
before tab
Signed-off-by: Joglekar Tejas <joglekartejas@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Antonio Murdaca [Mon, 8 Jun 2015 19:48:41 +0000 (21:48 +0200)]
staging: lustre: cleanup not needed else clauses
cleanup checkpatch.pl warnings about not needed else
clauses after a break or return
Signed-off-by: Antonio Murdaca <antonio.murdaca@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Thu, 4 Jun 2015 08:59:34 +0000 (11:59 +0300)]
staging: wilc1000: prevent some overflows in debugfs
Add some limits here so we don't corrupt memory.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Abhishek Sharma [Wed, 3 Jun 2015 12:25:50 +0000 (12:25 +0000)]
staging: wilc1000: Remove commented code lines
Removing the commented code lines.
Signed-off-by: Abhishek Sharma <asharm14@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Abhishek Sharma [Wed, 3 Jun 2015 10:09:16 +0000 (10:09 +0000)]
staging: wilc1000: Remove commented variable declerations
Removing the commented static variable declerations.
Signed-off-by: Abhishek Sharma <asharm14@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hari Prasath Gujulan Elango [Wed, 3 Jun 2015 09:08:16 +0000 (09:08 +0000)]
staging: wilc1000: remove commented code
Remove commented code from this file.
Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hari Prasath Gujulan Elango [Wed, 3 Jun 2015 09:07:44 +0000 (09:07 +0000)]
staging: wilc1000: remove ununsed function
The function WILC_WFI_InitPriv() is not used anywhere in the
driver.Hence remove it.
Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hari Prasath Gujulan yyElango [Tue, 2 Jun 2015 12:50:37 +0000 (12:50 +0000)]
staging: wilc1000: use time_after_eq
use the time_after_eq macro for the comparison operation
Signed-off-by: Hari Prasath Gujulan yyElango <hgujulan@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hari Prasath Gujulan Elango [Tue, 2 Jun 2015 12:49:12 +0000 (12:49 +0000)]
staging: wilc1000: remove dead code
Remove dead code or commented code
Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hari Prasath Gujulan Elango [Tue, 2 Jun 2015 12:48:05 +0000 (12:48 +0000)]
staging: wilc1000: remove unnecessary typecast
Remove ununecessary typecast for kzalloc.This patch was generated by
coccinelle tool
Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chaitanya Dhere [Tue, 2 Jun 2015 09:58:50 +0000 (09:58 +0000)]
staging: wilc1000: Modification in code to use ARRAY_SIZE macro
In this patch, ARRAY_SIZE() macro is used to determine the
size. This change was detected with the help of coccinelle
tool.
Signed-off-by: Chaitanya Dhere <cvijaydh@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sudip Mukherjee [Tue, 2 Jun 2015 08:58:17 +0000 (14:28 +0530)]
staging: wilc1000: fix warning while printing
size_t should print using %zu and unsigned long int should use %lu
but here it was using %d and hence we were getting warning while
printing.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Julia Lawall [Mon, 8 Jun 2015 12:53:20 +0000 (14:53 +0200)]
lustre: lov: Drop rq_buflen field
The rq_buflen field of the lov_request structure is never initialized. It
is only used in the free of req->rq_oi.oi_md in lov_finish_set. But no
oi_md field is ever initialized to the result of calling OBD_ALLOC_LARGE.
So it seems that the call to OBD_FREE_LARGE in lov_finish_set and the
rq_buflen in the lov_request structure are simply not needed.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Julia Lawall [Mon, 8 Jun 2015 12:53:19 +0000 (14:53 +0200)]
lustre: lov: Drop unneeded set_oabufs and set_pga fields
The fields set_oabufs and set_pga fields in the lov_request_set structure
are never set, so drop them. Drop also the corresponding test and free in
lov_finish_set.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Julia Lawall [Mon, 8 Jun 2015 12:53:18 +0000 (14:53 +0200)]
lustre: lov: Drop lov_lock_handles structure
The lov_lock_handles structure is only used as the type of the field
set_lockh in the lov_request_set structure, and this field is never set to
any value. Drop a test and free of this field in lov_finish_set. This
change enables also removing the functions lov_handle2llh and lov_llh_put
that manipulate values of type lov_lock_handles, but are now never called.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Fri, 5 Jun 2015 09:23:31 +0000 (12:23 +0300)]
Staging: Lustre: lproc_fid: remove some dead code
We know "rc == 0" so there is no need to check.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Fri, 5 Jun 2015 09:22:57 +0000 (12:22 +0300)]
Staging: lustre: ptlrpc: signedness bug in high_priority_ratio_store()
We want to store a non-negative int here. The original code had a check
for unsigned long less than zero which is a mistake but also casting
from a positive long to an int can result in a negative number.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xavier Roche [Fri, 5 Jun 2015 08:19:20 +0000 (10:19 +0200)]
staging: lustre: fixed const warnings (struct seq_operations should be const in these contexts)
Minor warnings spotted by checkpatch.pl in lustre regarding const correctness: struct seq_operations should be const.
Signed-off-by: Xavier Roche <roche+git@httrack.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Simmons [Wed, 3 Jun 2015 22:38:06 +0000 (18:38 -0400)]
staging:lustre: cleanup libcfs lock handling
Previously with libcfs being built for user land and kernel
space wrappers were created to transparently handle locking.
Now that user land support has been removed we delete all
those locking wrappers with this patch. Many of those changes
landed upstream but some nice cleanups still remain that are
pushed in this patch.
Signed-off-by: James Simmons <uja.ornl@gmail.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6245
Reviewed-on: http://review.whamcloud.com/13793
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Simmons [Wed, 3 Jun 2015 20:43:21 +0000 (16:43 -0400)]
staging:lustre: fixup LNet resource container api
Both lnet_res_container_setup and lnet_res_container_create
have additional parameters that are no longer used with the
removal of the FREELIST code. This patch removes the no
longer needed function arguments.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John L. Hammond [Wed, 3 Jun 2015 20:43:20 +0000 (16:43 -0400)]
staging:lustre: assume a kernel build
In lnet/lnet/ and lnet/selftest/ assume a kernel build (assume that
__KERNEL__ is defined). Remove some common code only needed for user
space LNet.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2675
Reviewed-on: http://review.whamcloud.com/13121
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Amir Shehata <amir.shehata@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chris Hanna [Wed, 3 Jun 2015 14:28:26 +0000 (10:28 -0400)]
staging: lustre: ptlrpc: clean up whitespace and align function params
Minor changes to remove excessive whitespace and improve
readability of ptlrpc functions.
Signed-off-by: Chris Hanna <hannac@iu.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chris Hanna [Wed, 3 Jun 2015 14:23:42 +0000 (10:23 -0400)]
staging: lustre: osc: clean up whitespace and align function parameters
Minor changes to remove excessive whitespace and improve
readability of osc functions.
Signed-off-by: Chris Hanna <hannac@iu.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aparna Karuthodi [Wed, 3 Jun 2015 09:33:57 +0000 (15:03 +0530)]
staging: lustre: llite: Fix No space after the declaration
Added a new line
Signed-off-by: Aparna Karuthodi <kdasaparna@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Prasanna Karthik [Tue, 2 Jun 2015 10:38:29 +0000 (10:38 +0000)]
Staging: lustre: Clean up Coding style Fix
Preferred use of '*' is adjacent to the data name or function name
Signed-off-by: Prasanna Karthik <mkarthi3@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Antonio Murdaca [Mon, 1 Jun 2015 21:14:14 +0000 (23:14 +0200)]
staging: lustre: lov: remove unnecessary parentheses
fix checkpatch.pl warning about unnecessary parentheses
Signed-off-by: Antonio Murdaca <antonio.murdaca@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Mon, 8 Jun 2015 17:34:44 +0000 (10:34 -0700)]
Merge 4.1-rc7 into staging-testing
We want the staging tree fixes in here too to help with testing and
merge issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Mon, 8 Jun 2015 03:23:50 +0000 (20:23 -0700)]
Linux 4.1-rc7
Linus Torvalds [Sun, 7 Jun 2015 23:56:10 +0000 (16:56 -0700)]
Merge branch 'upstream' of git://git.linux-mips.org/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
"Eight fixes across arch/mips. Nothing stands particuarly out nor is
complicated but fixes keep coming in at a higher than comfortable
rate"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: KVM: Do not sign extend on unsigned MMIO load
MIPS: BPF: Fix stack pointer allocation
MIPS: Loongson-3: Fix a cpu-hotplug issue in loongson3_ipi_interrupt()
MIPS: Fix enabling of DEBUG_STACKOVERFLOW
MIPS: c-r4k: Fix typo in probe_scache()
MIPS: Avoid an FPE exception in FCSR mask probing
MIPS: ath79: Add a missing new line in log message
MIPS: ralink: Fix clearing the illegal access interrupt
Linus Torvalds [Sun, 7 Jun 2015 05:37:45 +0000 (22:37 -0700)]
Merge tag 'driver-core-4.1-rc7' of git://git./linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are two fixes for the driver core that resolve some reported
issues.
One is a regression from 4.0, the other a fixes a reported oops that
has been there since 3.19.
Both have been in linux-next for a while with no problems"
* tag 'driver-core-4.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
drivers/base: cacheinfo: handle absence of caches
drivers: of/base: move of_init to driver_init
Linus Torvalds [Sun, 7 Jun 2015 05:33:08 +0000 (22:33 -0700)]
Merge tag 'staging-4.1-rc7' of git://git./linux/kernel/git/gregkh/staging
Pull staging / IIO fixes from Greg KH:
"Here are some IIO driver fixes to resolve reported issues, some ozwpan
fixes for some reported CVE problems, and a rtl8712 driver fix for a
reported regression.
All have been in linux-next successfully"
* tag 'staging-4.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8712: fix stack dump
ozwpan: unchecked signed subtraction leads to DoS
ozwpan: divide-by-zero leading to panic
ozwpan: Use unsigned ints to prevent heap overflow
ozwpan: Use proper check to prevent heap overflow
iio: adc: twl6030-gpadc: Fix modalias
iio: adis16400: Fix burst transfer for adis16448
iio: adis16400: Fix burst mode
iio: adis16400: Compute the scan mask from channel indices
iio: adis16400: Use != channel indices for the two voltage channels
iio: adis16400: Report pressure channel scale
Linus Torvalds [Sun, 7 Jun 2015 05:14:23 +0000 (22:14 -0700)]
Merge tag 'tty-4.1-rc7' of git://git./linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are a few TTY and Serial driver fixes for reported regressions
and crashes.
All of these have been in linux-next with no reported problems"
* tag 'tty-4.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
n_tty: Fix auditing support for cannonical mode
serial: 8250_omap: provide complete custom startup & shutdown callbacks
n_tty: Fix calculation of size in canon_copy_from_read_buf
serial: imx: Fix DMA handling for IDLE condition aborts
serial/amba-pl011: Unconditionally poll for FIFO space before each TX char
Linus Torvalds [Sun, 7 Jun 2015 05:06:53 +0000 (22:06 -0700)]
Merge tag 'usb-4.1-rc7' of git://git./linux/kernel/git/gregkh/usb
Pull USB and PHY driver fixes from Greg KH:
"Here are some USB and PHY driver fixes that resolve some reported
regressions. Also in here are some new device ids.
All of the details are in the shortlog and these patches have been in
linux-next with no problems"
* tag 'usb-4.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits)
USB: cp210x: add ID for HubZ dual ZigBee and Z-Wave dongle
usb: renesas_usbhs: Don't disable the pipe if Control write status stage
usb: renesas_usbhs: Fix fifo unclear in usbhsf_prepare_pop
usb: gadget: f_fs: fix check in read operation
usb: musb: fix order of conditions for assigning end point operations
usb: gadget: f_uac1: check return code from config_ep_by_speed
usb: gadget: ffs: fix: Always call ffs_closed() in ffs_data_clear()
usb: gadget: g_ffs: Fix counting of missing_functions
usb: s3c2410_udc: correct reversed pullup logic
usb: dwc3: gadget: Fix incorrect DEPCMD and DGCMD status macros
usb: phy: tahvo: Pass the IRQF_ONESHOT flag
usb: phy: ab8500-usb: Pass the IRQF_ONESHOT flag
usb: renesas_usbhs: Revise the binding document about the dma-names
usb: host: xhci: add mutex for non-thread-safe data
usb: make module xhci_hcd removable
USB: serial: ftdi_sio: Add support for a Motion Tracker Development Board
usb: gadget: f_midi: fix segfault when reading empty id
phy: phy-rcar-gen2: Fix USBHS_UGSTS_LOCK value
phy: omap-usb2: invoke pm_runtime_disable on error path
phy: fix Kconfig dependencies
...
Linus Torvalds [Sun, 7 Jun 2015 04:43:29 +0000 (21:43 -0700)]
Merge tag 'devicetree-for-linus' of git://git./linux/kernel/git/glikely/linux
Pull devicetree fix from Grant Likely:
"Stupid typo fix for v4.1. One of the IS_ENABLED() macro calls forgot
the CONFIG_ prefix. Only affects a tiny number of platforms, but
still..."
* tag 'devicetree-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux:
of/dynamic: Fix test for PPC_PSERIES
Linus Torvalds [Sat, 6 Jun 2015 16:15:14 +0000 (09:15 -0700)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"i915 has a bunch of fixes, and Russell found a bug in sysfs writing
handling that results in userspace getting stuck"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm: fix writing to /sys/class/drm/*/status
drm/i915: Move WaBarrierPerformanceFixDisable:skl to skl code from chv code
drm/i915: Include G4X/VLV/CHV in self refresh status
drm/i915: Initialize HWS page address after GPU reset
drm/i915: Don't skip request retirement if the active list is empty
drm/i915/hsw: Fix workaround for server AUX channel clock divisor
Linus Torvalds [Sat, 6 Jun 2015 16:08:23 +0000 (09:08 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
Pull input subsystem fixes from Dmitry Torokhov:
"Just a couple touchpad drivers fixups"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: alps - do not reduce trackpoint speed by half
Input: elantech - add new icbody type
Input: elantech - fix detection of touchpads where the revision matches a known rate
Linus Torvalds [Sat, 6 Jun 2015 16:06:20 +0000 (09:06 -0700)]
Merge branch 'stable/for-linus-4.1' of git://git./linux/kernel/git/konrad/swiotlb
Pull swiotlb fix from Konrad Rzeszutek Wilk:
"Tiny little fix which just converts an function to be static. Really
tiny"
* 'stable/for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
swiotlb: do not export map_single function
Linus Torvalds [Sat, 6 Jun 2015 16:03:54 +0000 (09:03 -0700)]
Merge branch 'stable/for-linus-4.1' of git://git./linux/kernel/git/konrad/ibft
Pull iBFT fix from Konrad Rzeszutek Wilk:
"One single fix from Chris to workaround UEFI platforms failing with
iSCSI IBFT"
* 'stable/for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft:
iscsi_ibft: filter null v4-mapped v6 addresses
Nicholas Mc Guire [Thu, 7 May 2015 12:47:50 +0000 (14:47 +0200)]
MIPS: KVM: Do not sign extend on unsigned MMIO load
Fix possible unintended sign extension in unsigned MMIO loads by casting
to uint16_t in the case of mmio_needed != 2.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Tested-by: James Hogan <james.hogan@imgtec.com>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/9985/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Markos Chandras [Thu, 4 Jun 2015 10:56:13 +0000 (11:56 +0100)]
MIPS: BPF: Fix stack pointer allocation
Fix stack pointer offset which could potentially corrupt
argument registers in the previous frame. The calculated offset
reflects the size of all the registers we need to preserve so there
is no need for this erroneous subtraction.
[ralf@linux-mips.org: Fixed conflict due to only applying this fix part
of the entire series as part of 4.1 fixes.]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: netdev@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Daniel Borkmann <dborkman@redhat.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/10527/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Huacai Chen [Thu, 4 Jun 2015 06:53:47 +0000 (14:53 +0800)]
MIPS: Loongson-3: Fix a cpu-hotplug issue in loongson3_ipi_interrupt()
setup_per_cpu_areas() only setup __per_cpu_offset[] for each possible
cpu, but loongson_sysconf.nr_cpus can be greater than possible cpus
(due to reserved_cpus_mask). So in loongson3_ipi_interrupt(), percpu
access will touch the original varible in .data..percpu section which
has been freed. Without this patch, cpu-hotplug will cause memery
corruption.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: John Crispin <john@phrozen.org>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Patchwork: http://patchwork.linux-mips.org/patch/10524/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
James Hogan [Thu, 4 Jun 2015 12:25:27 +0000 (13:25 +0100)]
MIPS: Fix enabling of DEBUG_STACKOVERFLOW
Commit
334c86c494b9 ("MIPS: IRQ: Add stackoverflow detection") added
kernel stack overflow detection, however it only enabled it conditional
upon the preprocessor definition DEBUG_STACKOVERFLOW, which is never
actually defined. The Kconfig option is called DEBUG_STACKOVERFLOW,
which manifests to the preprocessor as CONFIG_DEBUG_STACKOVERFLOW, so
switch it to using that definition instead.
Fixes: 334c86c494b9 ("MIPS: IRQ: Add stackoverflow detection")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Adam Jiang <jiang.adam@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 2.6.37+
Patchwork: http://patchwork.linux-mips.org/patch/10531/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Joshua Kinard [Tue, 2 Jun 2015 20:55:22 +0000 (16:55 -0400)]
MIPS: c-r4k: Fix typo in probe_scache()
Fixes a typo in arch/mips/mm/c-r4k.c's probe_scache().
Signed-off-by: Joshua Kinard <kumba@gentoo.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Chris Leech [Thu, 28 May 2015 19:51:51 +0000 (12:51 -0700)]
iscsi_ibft: filter null v4-mapped v6 addresses
I've had reports of UEFI platforms failing iSCSI boot in various
configurations, that ended up being caused by network initialization
scripts getting tripped up by unexpected null addresses (0.0.0.0) being
reported for gateways, dhcp servers, and dns servers.
The tianocore EDK2 iSCSI driver generates an iBFT table that always uses
IPv4-mapped IPv6 addresses for the NIC structure fields. This results
in values that are "not present or not specified" being reported as
::ffff:0.0.0.0 rather than all zeros as specified.
The iscsi_ibft module filters unspecified fields from the iBFT from
sysfs, preventing userspace from using invalid values and making it easy
to check for the presence of a value. This currently fails in regard to
these mapped null addresses.
In order to remain consistent with how the iBFT information is exposed,
we should accommodate the behavior of the tianocore iSCSI driver as it's
already in the wild in a large number of servers.
Tested under qemu using an OVMF build of tianocore EDK2.
Signed-off-by: Chris Leech <cleech@redhat.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Alexandre Courbot [Tue, 26 May 2015 09:02:54 +0000 (18:02 +0900)]
swiotlb: do not export map_single function
The map_single() function is not defined as static, even though it
doesn't seem to be used anywhere else in the kernel. Make it static to
avoid namespace pollution since this is a rather generic symbol.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Russell King [Fri, 5 Jun 2015 22:27:30 +0000 (08:27 +1000)]
drm: fix writing to /sys/class/drm/*/status
Writing to a file is supposed to return the number of bytes written.
Returning zero unfortunately causes bash to constantly spin trying
to write to the sysfs file, to such an extent that even ^c and ^z
have no effect. The only way out of that is to kill the shell and
log back in. This isn't nice behaviour.
Fix it by returning the number of characters written to sysfs files.
[airlied: used suggestion from Al Viro]
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Fri, 5 Jun 2015 21:14:13 +0000 (07:14 +1000)]
Merge tag 'drm-intel-fixes-2015-06-05' of git://anongit.freedesktop.org/drm-intel into drm-fixes
bunch of i915 fixes.
* tag 'drm-intel-fixes-2015-06-05' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Move WaBarrierPerformanceFixDisable:skl to skl code from chv code
drm/i915: Include G4X/VLV/CHV in self refresh status
drm/i915: Initialize HWS page address after GPU reset
drm/i915: Don't skip request retirement if the active list is empty
drm/i915/hsw: Fix workaround for server AUX channel clock divisor
Linus Torvalds [Fri, 5 Jun 2015 17:22:06 +0000 (10:22 -0700)]
Merge tag 'pci-v4.1-fixes-2' of git://git./linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
"Resource management
- Fix IOV sorting by alignment (Wei Yang)
- Preserve resource size during alignment reordering (Yinghai Lu)
Miscellaneous
- MAINTAINERS: Add Pratyush for SPEAr13xx and DesignWare PCIe (Pratyush Anand)"
* tag 'pci-v4.1-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: Preserve resource size during alignment reordering
PCI: Fix IOV resource sorting by alignment requirement
MAINTAINERS: Add Pratyush Anand as SPEAr13xx and DesignWare PCIe maintainer
Linus Torvalds [Fri, 5 Jun 2015 17:16:52 +0000 (10:16 -0700)]
Merge tag 'sound-4.1-rc7' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"It was a fairly calm week; here you can find only a few trivial quirks
and fixes for USB and HD-audio. All changes are pretty device
specific"
* tag 'sound-4.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: usb-audio: fix missing input volume controls in MAYA44 USB(+)
ALSA: usb-audio: add MAYA44 USB+ mixer control names
ALSA: hda/realtek - Add a fixup for another Acer Aspire 9420
ALSA: hda - Fix jack detection at resume with VT codecs
ALSA: usb-audio: don't try to get Outlaw RR2150 sample rate
ALSA: usb-audio: Add mic volume fix quirk for Logitech Quickcam Fusion
ALSA: hda/realtek - Suooprt Dell headset mode for ALC256
Linus Torvalds [Fri, 5 Jun 2015 17:14:51 +0000 (10:14 -0700)]
Merge tag 'iommu-fixes-v4.1-rc6' of git://git./linux/kernel/git/joro/iommu
Pull iommu fix from Joerg Roedel:
"Only one patch:
- Revert "iommu/amd: Don't allocate with __GFP_ZERO in
alloc_coherent".
This patch caused problems with some drivers, so it is better to
revert it now until the drivers have been fixed"
* tag 'iommu-fixes-v4.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
Revert "iommu/amd: Don't allocate with __GFP_ZERO in alloc_coherent"
Linus Torvalds [Fri, 5 Jun 2015 17:03:48 +0000 (10:03 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Misc fixes:
- early_idt_handlers[] fix that fixes the build with bleeding edge
tooling
- build warning fix on GCC 5.1
- vm86 fix plus self-test to make it harder to break it again"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm/irq: Stop relying on magic JMP behavior for early_idt_handlers
x86/asm/entry/32, selftests: Add a selftest for kernel entries from VM86 mode
x86/boot: Add CONFIG_PARAVIRT_SPINLOCKS quirk to arch/x86/boot/compressed/misc.h
x86/asm/entry/32: Really make user_mode() work correctly for VM86 mode
Linus Torvalds [Fri, 5 Jun 2015 17:00:53 +0000 (10:00 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"The biggest chunk of the changes are two regression fixes: a HT
workaround fix and an event-group scheduling fix. It's been verified
with 5 days of fuzzer testing.
Other fixes:
- eBPF fix
- a BIOS breakage detection fix
- PMU driver fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/pt: Fix a refactoring bug
perf/x86: Tweak broken BIOS rules during check_hw_exists()
perf/x86/intel/pt: Untangle pt_buffer_reset_markers()
perf: Disallow sparse AUX allocations for non-SG PMUs in overwrite mode
perf/x86: Improve HT workaround GP counter constraint
perf/x86: Fix event/group validation
perf: Fix race in BPF program unregister
Linus Torvalds [Fri, 5 Jun 2015 16:58:36 +0000 (09:58 -0700)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Just two small fixes: one radeon, one amdkfd"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/amdkfd: fix topology bug with capability attr.
drm/radeon: use proper ACR regisiter for DCE3.2
Linus Torvalds [Fri, 5 Jun 2015 16:54:43 +0000 (09:54 -0700)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux
Pull i2c bug fixes from Wolfram Sang:
"Two small bugfixes for I2C"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: s3c2410: fix oops in suspend callback for non-dt platforms
i2c: hix5hd2: Fix modalias to make module auto-loading work
Greg Kroah-Hartman [Fri, 5 Jun 2015 14:19:45 +0000 (23:19 +0900)]
Merge tag 'usb-serial-4.1-rc7' of git://git./linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for v4.1-rc7
Here are a couple of new device ids.
Signed-off-by: Johan Hovold <johan@kernel.org>
Hans de Goede [Fri, 5 Jun 2015 05:31:43 +0000 (22:31 -0700)]
Input: alps - do not reduce trackpoint speed by half
On some v7 devices (e.g. Lenovo-E550) the deltas reported are typically
only in the 0-1 range dividing this by 2 results in a range of 0-0.
And even for v7 devices where this does not lead to making the trackstick
entirely unusable, it makes it twice as slow as before we added v7 support
and were using the ps/2 mouse emulation of the dual point setup.
If some kind of generic slowdown is actually necessary for some devices,
then that belongs in userspace, not in the kernel.
Cc: stable@vger.kernel.org
Reported-and-tested-by: Rico Moorman <rico.moorman@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
洪一竹 [Fri, 5 Jun 2015 05:00:24 +0000 (22:00 -0700)]
Input: elantech - add new icbody type
This adds new icbody type to the list recognized by Elantech PS/2 driver.
Cc: stable@vger.kernel.org
Signed-off-by: Sam Hung <sam.hung@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Geert Uytterhoeven [Thu, 4 Jun 2015 09:34:41 +0000 (11:34 +0200)]
of/dynamic: Fix test for PPC_PSERIES
"IS_ENABLED(PPC_PSERIES)" always evaluates to false, as IS_ENABLED() is
supposed to be used with the full Kconfig symbol name, including the
"CONFIG_" prefix.
Add the missing "CONFIG_" prefix to fix this.
Fixes: a25095d451ece23b ("of: Move dynamic node fixups out of powerpc and into common code")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: stable@vger.kernel.org #+3.17
Signed-off-by: Grant Likely <grant.likely@linaro.org>
Helge Deller [Thu, 4 Jun 2015 21:57:18 +0000 (23:57 +0200)]
compat: cleanup coding in compat_get_bitmap() and compat_put_bitmap()
In the functions compat_get_bitmap() and compat_put_bitmap() the
variable nr_compat_longs stores how many compat_ulong_t words should be
copied in a loop.
The copy loop itself is this:
if (nr_compat_longs-- > 0) {
if (__get_user(um, umask)) return -EFAULT;
} else {
um = 0;
}
Since nr_compat_longs gets unconditionally decremented in each loop and
since it's type is unsigned this could theoretically lead to out of
bounds accesses to userspace if nr_compat_longs wraps around to
(unsigned)(-1).
Although the callers currently do not trigger out-of-bounds accesses, we
should better implement the loop in a safe way to completely avoid such
warp-arounds.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
John D. Blair [Thu, 4 Jun 2015 20:18:19 +0000 (13:18 -0700)]
USB: cp210x: add ID for HubZ dual ZigBee and Z-Wave dongle
Added the USB serial device ID for the HubZ dual ZigBee
and Z-Wave radio dongle.
Signed-off-by: John D. Blair <johnb@candicontrols.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Linus Torvalds [Thu, 4 Jun 2015 17:19:34 +0000 (10:19 -0700)]
Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"We have two small fixes:
- pl330 termination hang fix by Krzysztof
- hsu memory leak fix by Peter"
* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: hsu: Fix memory leak when stopping a running transfer
dmaengine: pl330: Fix hang on dmaengine_terminate_all on certain boards
Alexander Shishkin [Thu, 4 Jun 2015 13:31:47 +0000 (16:31 +0300)]
perf/x86/intel/pt: Fix a refactoring bug
Commit
066450be41 ("perf/x86/intel/pt: Clean up the control flow
in pt_pmu_hw_init()") changed attribute initialization so that
only the first attribute gets initialized using
sysfs_attr_init(), which upsets lockdep.
This patch fixes the glitch so that all allocated attributes are
properly initialized thus fixing the lockdep warning reported by
Tvrtko and Imre.
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reported-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: <linux-kernel@vger.kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ville Syrjälä [Tue, 2 Jun 2015 12:37:35 +0000 (15:37 +0300)]
drm/i915: Move WaBarrierPerformanceFixDisable:skl to skl code from chv code
commit
65ca7514e21adbee25b8175fc909759c735d00ff
Author: Damien Lespiau <damien.lespiau@intel.com>
Date: Mon Feb 9 19:33:22 2015 +0000
drm/i915/skl: Implement WaBarrierPerformanceFixDisable
got misapplied and the code landed in chv_init_workarounds() instead of
the intended skl_init_workarounds(). Move it over to the right place.
Cc: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Ander Conselvan de Oliveira [Tue, 2 Jun 2015 11:17:47 +0000 (14:17 +0300)]
drm/i915: Include G4X/VLV/CHV in self refresh status
Add all missing platforms handled by intel_set_memory_cxsr() to the
i915_sr_status debugfs entry.
v2: Add G4X too. (Ville)
Clarify the change also affects CHV. (Ander)
References: https://bugs.freedesktop.org/show_bug.cgi?id=89792
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Arun Siluvery [Tue, 2 Jun 2015 19:06:59 +0000 (20:06 +0100)]
drm/i915: Initialize HWS page address after GPU reset
After GPU reset, HW is losing the address of HWS page in the register.
The page itself is valid except that HW is not aware of its location.
[ 64.368623] [drm:gen8_init_common_ring [i915]] *ERROR* HWS Page address = 0x00000000
[ 64.368655] [drm:gen8_init_common_ring [i915]] *ERROR* HWS Page address = 0x00000000
[ 64.368681] [drm:gen8_init_common_ring [i915]] *ERROR* HWS Page address = 0x00000000
[ 64.368704] [drm:gen8_init_common_ring [i915]] *ERROR* HWS Page address = 0x00000000
This patch reloads this value into the register during ring init.
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Dave Airlie [Thu, 4 Jun 2015 02:29:04 +0000 (12:29 +1000)]
Merge tag 'drm-amdkfd-fixes-2015-06-03' of git://people.freedesktop.org/~gabbayo/linux into drm-fixes
One minor fix for last -rc of 4.1. The fix moves the update of an attribute in
topology to *after* it is actually initialized.
* tag 'drm-amdkfd-fixes-2015-06-03' of git://people.freedesktop.org/~gabbayo/linux:
drm/amdkfd: fix topology bug with capability attr.
Dave Airlie [Thu, 4 Jun 2015 02:28:41 +0000 (12:28 +1000)]
Merge branch 'drm-fixes-4.1' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
One more small r7xx audio regression fix for 4.1
* 'drm-fixes-4.1' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: use proper ACR regisiter for DCE3.2
Linus Torvalds [Wed, 3 Jun 2015 23:35:00 +0000 (16:35 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block layer fixes from Jens Axboe:
"Sending this off now, as I'm not aware of other current bugs, nor do I
expect further fixes before 4.1 final. This contains two fixes:
- a fix for a bdi unregister warning that gets spewed on md, due to a
regression introduced earlier in this cycle. From Neil Brown.
- a fix for a compile warning for NVMe on 32-bit platforms, also a
regression introduced in this cycle. From Arnd Bergmann"
* 'for-linus' of git://git.kernel.dk/linux-block:
NVMe: fix type warning on 32-bit
block: discard bdi_unregister() in favour of bdi_destroy()
Stephen Hemminger [Wed, 3 Jun 2015 20:32:02 +0000 (13:32 -0700)]
MAINTAINERS - remove OSDL reference
OSDL has been gone for many years, looks like there still was
one reference to it.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexey Skidanov [Sun, 30 Nov 2014 13:03:51 +0000 (15:03 +0200)]
drm/amdkfd: fix topology bug with capability attr.
This patch fixes a bug where the number of watch points
was shown before it was actually calculated
Signed-off-by: Alexey Skidanov <Alexey.Skidanov@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Jan Kara [Wed, 3 Jun 2015 13:50:35 +0000 (15:50 +0200)]
lib: Clarify the return value of strnlen_user()
strnlen_user() can return a number in a range 0 to count +
sizeof(unsigned long) - 1. Clarify the comment at the top of the
function so that users don't think the function returns at most count+1.
Signed-off-by: Jan Kara <jack@suse.cz>
[ Also added commentary about preferably not using this function ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Clemens Ladisch [Wed, 3 Jun 2015 09:36:51 +0000 (11:36 +0200)]
ALSA: usb-audio: fix missing input volume controls in MAYA44 USB(+)
The driver worked around an error in the MAYA44 USB(+)'s mixer unit
descriptor by aborting before parsing the missing field. However,
aborting parsing too early prevented parsing of the other units
connected to this unit, so the capture mixer controls would be missing.
Fix this by moving the check for this descriptor error after the parsing
of the unit's input pins.
Reported-by: nightmixes <nightmixes@gmail.com>
Tested-by: nightmixes <nightmixes@gmail.com>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Clemens Ladisch [Wed, 3 Jun 2015 09:36:42 +0000 (11:36 +0200)]
ALSA: usb-audio: add MAYA44 USB+ mixer control names
Add mixer control names for the ESI Maya44 USB+ (which appears to be
identical width the AudioTrak Maya44 USB).
Reported-by: nightmixes <nightmixes@gmail.com>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Maciej W. Rozycki [Tue, 2 Jun 2015 16:50:59 +0000 (17:50 +0100)]
MIPS: Avoid an FPE exception in FCSR mask probing
Use the default FCSR value in mask probing, avoiding an FPE exception
where reset has left any exception enable and their corresponding cause
bits set and the register is then rewritten with these bits active.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Joshua Kinard <kumba@gentoo.org>
Cc: linux-mips@linux-mips.org
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Linus Torvalds [Tue, 2 Jun 2015 17:58:34 +0000 (10:58 -0700)]
Merge tag 'please-pull-rusty' of git://git./linux/kernel/git/aegl/linux
Pull ia64 fix from Tony Luck:
"Fix some build warnings for ia64 - cpu_callin_map doesn't need to be
volatile"
* tag 'please-pull-rusty' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
ia64: make cpu_callin_map non-volatile.
Takashi Iwai [Tue, 2 Jun 2015 17:57:08 +0000 (19:57 +0200)]
ALSA: hda/realtek - Add a fixup for another Acer Aspire 9420
Acer Aspire 9420 with ALC883 (1025:0107) needs the fixup for EAPD to
make the sound working like other Aspire models.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=94111
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Hans de Goede [Tue, 2 Jun 2015 17:40:50 +0000 (10:40 -0700)]
Input: elantech - fix detection of touchpads where the revision matches a known rate
Make the check to skip the rate check more lax, so that it applies
to all hw_version 4 models.
This fixes the touchpad not being detected properly on Asus PU551LA
laptops.
Cc: stable@vger.kernel.org
Reported-and-tested-by: David Zafra Gómez <dezeta@klo.es>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Sasha Levin [Wed, 28 Jan 2015 20:30:43 +0000 (15:30 -0500)]
vfs: read file_handle only once in handle_to_path
We used to read file_handle twice. Once to get the amount of extra
bytes, and once to fetch the entire structure.
This may be problematic since we do size verifications only after the
first read, so if the number of extra bytes changes in userspace between
the first and second calls, we'll have an incoherent view of
file_handle.
Instead, read the constant size once, and copy that over to the final
structure without having to re-read it again.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Tue, 2 Jun 2015 15:10:28 +0000 (17:10 +0200)]
lib: Fix strnlen_user() to not touch memory after specified maximum
If the specified maximum length of the string is a multiple of unsigned
long, we would load one long behind the specified maximum. If that
happens to be in a next page, we can hit a page fault although we were
not expected to.
Fix the off-by-one bug in the test whether we are at the end of the
specified range.
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rusty Russell [Mon, 1 Jun 2015 06:23:53 +0000 (15:53 +0930)]
ia64: make cpu_callin_map non-volatile.
cpumask_test_cpu() doesn't take volatile, unlike the obsoleted
cpu_isset. The only place ia64 really cares is the spin waiting for a
bit; udelay() is probably a barrier but insert barrier() to be sure.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Alban Bedel [Sun, 19 Apr 2015 12:30:01 +0000 (14:30 +0200)]
MIPS: ath79: Add a missing new line in log message
The memory setup log is missing a new line.
Signed-off-by: Alban Bedel <albeu@free.fr>
Cc: linux-mips@linux-mips.org
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: Qais Yousef <qais.yousef@imgtec.com>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Cc: Gabor Juhos <juhosg@openwrt.org>
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/9771/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Peter Ujfalusi [Tue, 26 May 2015 10:11:28 +0000 (13:11 +0300)]
dmaengine: hsu: Fix memory leak when stopping a running transfer
The vd->node is removed from the lists when the transfer started so the
vchan_get_all_descriptors() will not find it. This results memory leak.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
[andy: fix the typo to prevent a compilation error]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Andy Lutomirski [Fri, 22 May 2015 23:15:47 +0000 (16:15 -0700)]
x86/asm/irq: Stop relying on magic JMP behavior for early_idt_handlers
The early_idt_handlers asm code generates an array of entry
points spaced nine bytes apart. It's not really clear from that
code or from the places that reference it what's going on, and
the code only works in the first place because GAS never
generates two-byte JMP instructions when jumping to global
labels.
Clean up the code to generate the correct array stride (member size)
explicitly. This should be considerably more robust against
screw-ups, as GAS will warn if a .fill directive has a negative
count. Using '. =' to advance would have been even more robust
(it would generate an actual error if it tried to move
backwards), but it would pad with nulls, confusing anyone who
tries to disassemble the code. The new scheme should be much
clearer to future readers.
While we're at it, improve the comments and rename the array and
common code.
Binutils may start relaxing jumps to non-weak labels. If so,
this change will fix our build, and we may need to backport this
change.
Before, on x86_64:
0000000000000000 <early_idt_handlers>:
0: 6a 00 pushq $0x0
2: 6a 00 pushq $0x0
4: e9 00 00 00 00 jmpq 9 <early_idt_handlers+0x9>
5: R_X86_64_PC32 early_idt_handler-0x4
...
48: 66 90 xchg %ax,%ax
4a: 6a 08 pushq $0x8
4c: e9 00 00 00 00 jmpq 51 <early_idt_handlers+0x51>
4d: R_X86_64_PC32 early_idt_handler-0x4
...
117: 6a 00 pushq $0x0
119: 6a 1f pushq $0x1f
11b: e9 00 00 00 00 jmpq 120 <early_idt_handler>
11c: R_X86_64_PC32 early_idt_handler-0x4
After:
0000000000000000 <early_idt_handler_array>:
0: 6a 00 pushq $0x0
2: 6a 00 pushq $0x0
4: e9 14 01 00 00 jmpq 11d <early_idt_handler_common>
...
48: 6a 08 pushq $0x8
4a: e9 d1 00 00 00 jmpq 120 <early_idt_handler_common>
4f: cc int3
50: cc int3
...
117: 6a 00 pushq $0x0
119: 6a 1f pushq $0x1f
11b: eb 03 jmp 120 <early_idt_handler_common>
11d: cc int3
11e: cc int3
11f: cc int3
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Binutils <binutils@sourceware.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H.J. Lu <hjl.tools@gmail.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/ac027962af343b0c599cbfcf50b945ad2ef3d7a8.1432336324.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Joerg Roedel [Mon, 1 Jun 2015 15:30:57 +0000 (17:30 +0200)]
Revert "iommu/amd: Don't allocate with __GFP_ZERO in alloc_coherent"
This reverts commit
5fc872c7323534e8f7dc21bab635e7a9b9659e07.
The DMA-API does not strictly require that the memory
returned by dma_alloc_coherent is zeroed out. For that
another function (dma_zalloc_coherent) should be used. But
all other x86 DMA-API implementation I checked zero out the
memory, so that some drivers rely on it and break when it is
not.
It seems the (driver-)world is not yet ready for this
change, so revert it.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Nicholas Mc Guire [Fri, 29 May 2015 15:31:16 +0000 (17:31 +0200)]
staging: unisys: use schedule_timeout_interruptible()
API consolidation with coccinelle found:
./drivers/staging/unisys/visorbus/periodic_work.c:196:3-19:
consolidation with schedule_timeout_*() recommended
This is a 1:1 conversion with respect to schedule_timeout() to the
schedule_timeout_interruptible() helper only - so only an API
consolidation to improve readability. The hard coded timeout of 10
jiffies is HZ dependent which it should not be, so it is converted
with msecs_to_jiffies.
Patch was compile tested with x86_64_defconfig + CONFIG_STAGING=y,
CONFIG_UNISYSSPAR=y, CONFIG_UNISYS_VISORBUS=m
Patch is against 4.1-rc5 (localversion-next is -next-
20150529)
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Don Zickus [Mon, 1 Jun 2015 17:00:28 +0000 (13:00 -0400)]
staging: unisys: Prepare vbus_hdr_info to be public
In order to remove bus_info, we need to migrate vbus_hdr_info into
the public namespace of visor_device. Because the struct is private,
we use a void * to hide the contents.
As a result, we need to allocate vbus_hdr_info and manage it.
Also work around vbus_valid, as that variable will not be used
in the public namespace.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Don Zickus [Mon, 1 Jun 2015 17:00:27 +0000 (13:00 -0400)]
staging: unisys: Convert pending_msg_hdr to a pointer
In order for bus/dev_info structs to become public structs, one
element, pending_msg_hdr, needs to become opaque. This is to keep
all the internals of the controlvm struct private to the bus layer.
So a simple conversion of embedding the pending_msg_hdr struct into
a pointer is done. The rest of the patch is the fallout.
The rules are modified slightly. Instead of relying on the 'id' to be
CONTROLVM_INVALID to indicate invalid, just use the pointer set to NULL.
In addition, because bus/dev_info can be NULL and we still need to send
a
response, pass pending_msg_hdr to all 'responders' instead of bus/
That change causes some fallout in the success case. Instead of setting
state
bits and clearing info in the responders, do all that magic in the
responder
wrappers.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Don Zickus [Mon, 1 Jun 2015 17:00:26 +0000 (13:00 -0400)]
staging: unisys: Move channel creation up the stack
Instead of creating a channel struct to temporarily hold the channel
info and passing it through multiple functions until the device is
created, just create the channel from the start.
This allows us to remove the channel_info struct.
I noticed 'chan_info.addr_type' was not being used, so I just deleted it.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 2 Jun 2015 05:16:04 +0000 (14:16 +0900)]
staging: wilc1000: remove WILC_Uint8
Just use u8, as that's what you really want in a kernel driver.
Cc: Johnny Kim <johnny.kim@atmel.com>
Cc: Rachel Kim <rachel.kim@atmel.com>
Cc: Dean Lee <dean.lee@atmel.com>
Cc: Chris Park <chris.park@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 2 Jun 2015 05:11:12 +0000 (14:11 +0900)]
staging: wilc100: remove WILC_NULL usage
Use the "real" NULL value, don't try to be cute and define your own
value for something that the compiler obviously supports.
Cc: Johnny Kim <johnny.kim@atmel.com>
Cc: Rachel Kim <rachel.kim@atmel.com>
Cc: Dean Lee <dean.lee@atmel.com>
Cc: Chris Park <chris.park@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 2 Jun 2015 05:03:03 +0000 (14:03 +0900)]
staging: wilc1000: remove unused data types
There's some "custom" data types defined that are never used in the
driver, so remove them before we work on converting the rest to be
"standard" data types.
Cc: Johnny Kim <johnny.kim@atmel.com>
Cc: Rachel Kim <rachel.kim@atmel.com>
Cc: Dean Lee <dean.lee@atmel.com>
Cc: Chris Park <chris.park@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Mon, 1 Jun 2015 19:20:11 +0000 (21:20 +0200)]
staging: wilc1000: update TODO list
I have crossed off one item on the list, but found a few others that should
not get lost, so here is an update of the wilc1000 list
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Mon, 1 Jun 2015 19:06:45 +0000 (21:06 +0200)]
staging: wilc1000: fix compiler warnings
This avoids the remaining warnings that one gets on a normal
build: unused variables, unused labels, and invalid printk
format strings.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Mon, 1 Jun 2015 19:06:44 +0000 (21:06 +0200)]
staging: wilc1000: fix const cast warnings
The wilc1000 driver produces a lot of warnings about invalid
casts between const and non-const variables. This reworks
the code to avoid all those warnings, by marking variables
and function arguments const.
A lot of the types use WILC_Uint8, I change them to const u8
for style reasons, as I'm touching them anyway.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Mon, 1 Jun 2015 19:06:43 +0000 (21:06 +0200)]
staging: wilc1000: remove semaphore wrapper
The various semaphore functions all directly translate into
sema_init(), down() and up(), so we can just remove the API.
This is a mostly automated conversion using simple sed scripts,
plus some manual changes to account for down() returning no
error.
As a positive side-effect, down() no longer hangs after
receiving a signal, as the original code did by looping around
down_interruptible.
The semaphores still need to be turned into mutexes as a
follow-up step.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Mon, 1 Jun 2015 19:06:42 +0000 (21:06 +0200)]
staging: wilc1000: remove EXPORT_SYMTAB
The EXPORT_SYMTAB symbol has not been used in Linux for a very
long time, the driver does not need to set it.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Mon, 1 Jun 2015 19:06:41 +0000 (21:06 +0200)]
staging: wilc1000: remove unused OS abstraction features
All the remaining features from the OS abstraction layer
are not used at all in the driver, so we can just remove
the remaining references to them.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This page took 0.048259 seconds and 5 git commands to generate.