Ricardo Cerqueira [Thu, 17 Aug 2006 21:40:28 +0000 (18:40 -0300)]
V4L/DVB (4504): Enable audio DMA restart on channel change even when cx88-alsa is compiled
cx88-alsa can be compiled in (in distro built kernels, for example), but
not used. In those cases, the audio DMA restart is needed for proper sound
on NICAM channels.
This patch enables the DMA restart even with ALSA, but the functions now
check if cx88-alsa is really active.
Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Christoph Pfister [Sat, 12 Aug 2006 12:13:35 +0000 (09:13 -0300)]
V4L/DVB (4501): Add support for knc one dvb-s plus with 1894:0011
Apparently there are two types of knc1 dvb-s plus cards with different tuners
(as for the knc1 dvb-s ones). This patch adds support for those cards with
subsystem id 1894:0011.
Successfully tested by: Benjamin Weber <benny1990@gmail.com>
Signed-off-by: Christoph Pfister <christophpfister@gmail.com>
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Andrew de Quincey [Sat, 12 Aug 2006 12:09:44 +0000 (09:09 -0300)]
V4L/DVB (4500): Fix KNC1 DVBC support
This actually needs the same configuration as the other DVBC cards; simply
no one had managed to test before to find out.
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Alexey Dobriyan [Sun, 13 Aug 2006 01:01:27 +0000 (22:01 -0300)]
V4L/DVB (4499): CONFIG_PM=n slim: drivers/media/video/*
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Sun, 13 Aug 2006 00:59:19 +0000 (21:59 -0300)]
V4L/DVB (4498): Offset parameter permission were 0x666, instead of 0x664
Although not dangerous, it may allow a normal user with access to a machine
to untune a TV channel.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Chris Pascoe [Thu, 10 Aug 2006 06:22:21 +0000 (03:22 -0300)]
V4L/DVB (4497): Reset USB part of DViCO Dual Digital during PCI driver attach
If the FX2 does not reset properly during reboot, it can present an
invalid USB device ID and fail to attach. Prevent this situation
from occuring by resetting the USB part of the card when the PCI part
probes.
Also fix the GPIO configurations so that analog capture will not
inadvertantly reset the USB part.
Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Chris Pascoe [Thu, 10 Aug 2006 06:17:42 +0000 (03:17 -0300)]
V4L/DVB (4496): Tuning tweaks for ZL10353
More register setup which improves the ZL10353's tuning characteristics.
Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Chris Pascoe [Thu, 10 Aug 2006 06:17:16 +0000 (03:17 -0300)]
V4L/DVB (4495): Fix "no data from ZL10353 based USB tuner" problem
Force parallel transport stream output on the ZL10353 attached to a
bluebird device.
Addresses the problem where a frontend lock was observed, but no MPEG
transport data was received.
Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Oliver Endriss [Tue, 8 Aug 2006 22:58:27 +0000 (19:58 -0300)]
V4L/DVB (4493): [lnbp21] release callback fixed
lnbp21 module must use fe->ops.release_sec, not fe->ops.release.
The release function of the frontend driver was never called for cards
with lnbp21...
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Oliver Endriss [Tue, 8 Aug 2006 22:51:04 +0000 (19:51 -0300)]
V4L/DVB (4492): [dvb_attach] dvb_frontend_detach fix
dvb_frontend_detach() used invalid config option CONFIG_DVB_DETACH,
so dvb_frontend_detach() did not call symbol_put_addr().
Replaced CONFIG_DVB_DETACH by CONFIG_DVB_CORE_ATTACH.
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Trent Piepho [Mon, 7 Aug 2006 23:01:01 +0000 (20:01 -0300)]
V4L/DVB (4490): Whitespace cleanup
from whitespace cleaning script
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Trent Piepho [Mon, 7 Aug 2006 22:43:21 +0000 (19:43 -0300)]
V4L/DVB (4488): Fix possible crash in Hauppauge eeprom reading
If an eeprom defined two tuners and they supported more than eight
standards combined (as opposed to each), it would overflow an array.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Tue, 8 Aug 2006 18:21:47 +0000 (15:21 -0300)]
V4L/DVB (4485): Fix a warning on PPC64
drivers/media/video/pvrusb2/pvrusb2-i2c-cmd-v4l2.c: In function 'set_standard':
drivers/media/video/pvrusb2/pvrusb2-i2c-cmd-v4l2.c:33: warning: format '%llx' expects type 'long long unsigned int', but argument 2 has type 'v4l2_std_id'
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Andrew Morton [Tue, 8 Aug 2006 13:52:22 +0000 (10:52 -0300)]
V4L/DVB (4484): Git-dvb: cadet build fix
drivers/media/radio/radio-cadet.c: In function 'cadet_do_ioctl':
drivers/media/radio/radio-cadet.c:362: warning: implicit declaration of function 'KERNEL_VERSION'
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Patrick Boettcher [Sun, 6 Aug 2006 11:49:09 +0000 (08:49 -0300)]
V4L/DVB (4481): Make the dibx000-common-module GPL
Forget to put the MODULE-define and thus to give the license. Now GPL
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Dave Jones [Mon, 7 Aug 2006 16:18:56 +0000 (13:18 -0300)]
V4L/DVB (4480): Remove null chars from dvb names
DVB null terminates its device names, which seems odd, and should be
unnecessary.
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Yeasah Pell [Tue, 26 Sep 2006 15:30:14 +0000 (12:30 -0300)]
V4L/DVB (4479): LNB voltage control was inverted for the benefit of geniatech cards on Kworld
1) It sets LNBDCPol differently based on the card type. Now it should
work properly for both the kworld and geniatech cards.
2) It stops returning an error for the SEC_VOLTAGE_OFF voltage command
(the cx88-dvb level handles the actual voltage on/off, but it still
passes the ioctl down to the cx24123 level, which previously rejected
the OFF as invalid so the ioctl would report failure)
Acked-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Yeasah Pell <yeasah@schwide.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Oliver Endriss [Mon, 7 Aug 2006 05:04:26 +0000 (02:04 -0300)]
V4L/DVB (4478): [av7110] Support Grundig DVB-T tuner for sub-system 13c2:0001
Some DVB-T cards with Grundig 29504-401 tuner use subsystem id 13c2:0001
(reported by Stuart Butterfield).
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Sun, 6 Aug 2006 20:03:50 +0000 (17:03 -0300)]
V4L/DVB (4477): Improve hardware algorithm by setting the appropriate registers
Hardware algorithm needs to be configured to:
1) Increase timeout constants, to detect weaker signals;
2) do a wider zigzag search.
Acked-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Sun, 6 Aug 2006 13:16:27 +0000 (10:16 -0300)]
V4L/DVB (4475): Fix most Compat32 stuff on V4L2
Tested on x64 with a bttv board. Most Get ioctls are fixed. The only
non-completely working one is VIDIOCGAUDIO. All other IOR ioctls give the
same results on x86_64 and i386 architectures.
Thanks to Alastair Poole <netstar@gatheringofgray.com> for part of this
patch and tests on ppc64.
Signed-off-by: Alastair Poole <netstar@gatheringofgray.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Sun, 6 Aug 2006 12:10:06 +0000 (09:10 -0300)]
V4L/DVB (4474): On some cases, depth were not returned.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Patrick Boettcher [Sun, 6 Aug 2006 09:40:58 +0000 (06:40 -0300)]
V4L/DVB (4472): Remove debug-print from dib3000mc
Removed and commented a small debug function.
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
matthieu castet [Thu, 3 Aug 2006 09:36:17 +0000 (06:36 -0300)]
V4L/DVB (4470): MT2060: turn on the VGA
The VGA was not turned on after calling sleep. This lead to bad performance in difficult areas.
Signed-off-by: matthieu castet <castet.matthieu@free.fr>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Patrick Boettcher [Thu, 3 Aug 2006 09:04:16 +0000 (06:04 -0300)]
V4L/DVB (4468): Another fix for attaching the DiB3000MC
Another stupid fix for attaching the DiB3000MC. == 0 instead of != 0.
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Patrick Boettcher [Tue, 8 Aug 2006 18:48:11 +0000 (15:48 -0300)]
V4L/DVB: DiB3000MC: set FE to NULL after being freed
DiB3000MC: set FE to NULL after being freed
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Klaus Frahm [Sat, 29 Jul 2006 21:49:36 +0000 (18:49 -0300)]
V4L/DVB (4464): FIX_ AverTV A800 trouble
A new revision of the Avermedia A800 does not reenumerate after download the firmware.
Signed-off-by: Klaus Frahm <frahm@irsamc.ups-tlse.fr>
Signed-off-by: Martin Habbecke <M.Habbecke@gmx.de>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Patrick Boettcher [Sat, 29 Jul 2006 21:24:21 +0000 (18:24 -0300)]
V4L/DVB (4463): New firmware for Nova-t-usb2
Thomas Rokamp and others are reporting:
"I have now with success extracted a working firmware for the 93004 rev. C1A2."
This patch increments the firmware version to 2.
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Patrick Boettcher [Wed, 2 Aug 2006 11:44:31 +0000 (08:44 -0300)]
V4L/DVB (4465): Attach the dib3000mc correctly
Flynn Marquardt found out that there is problem with the new dib3000mc-driver
when using with the real dib3000mc. It resulted in a segfault.
Fixed two things: use the correct I2C address and do not attach a tuner, when
the demod was previously failing.
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Patrick Boettcher [Sat, 29 Jul 2006 20:33:44 +0000 (17:33 -0300)]
V4L/DVB (4461): Added missing dibx000-common code and headers
The first commit omitted the common-code and header-files.
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Patrick Boettcher [Tue, 8 Aug 2006 18:48:10 +0000 (15:48 -0300)]
V4L/DVB: Complete rewrite of the DiB3000mc-driver
A complete rewrite of the DiB3000MC/P driver has been done. It is now much more
easy to maintain and to get improvements inside.
Additionally the tuning time has been reduced and the usage of the driver is
much more understandable now.
Signed-off-by: Patrick Boettcher <pboettcher@dibcom.fr>
Signed-off-by: Francois KANOUNNIKOFF <fkanounnikoff@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Patrick Boettcher [Tue, 4 Jul 2006 16:47:16 +0000 (13:47 -0300)]
V4L/DVB (4457): Remove dib3000-common-module
removing the dib3000-common-module. The common stuff is not common anymore - it will be only used by the 3000mb-driver.
A new 3000mc/p-driver will be added which will share common stuff with dib7000.
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Olivier DANET [Tue, 8 Aug 2006 18:48:10 +0000 (15:48 -0300)]
V4L/DVB: Update for MT2060 to use dvb_tuner_ops
new tuner api
minor fixes for tuning
Signed-off-by: Olivier DANET <odanet@caramail.com>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Patrick Boettcher [Sun, 14 May 2006 13:49:42 +0000 (10:49 -0300)]
V4L/DVB (4454): Corrected debugging output of the mt2060
When debugging was disabled at lot of empty lines where printed anyway.
Reported by Rolf Ahrenberg and Sergei Haller.
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Patrick Boettcher [Tue, 8 Aug 2006 18:48:10 +0000 (15:48 -0300)]
V4L/DVB: MT2060: Code cleanups, adding to new build-mechanism
Some minor code cleanups and added the MT2060 to new v4l-dvb-build-system, preliminarily under dvb/frontends.
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Sergei Haller [Sun, 14 May 2006 13:47:21 +0000 (10:47 -0300)]
V4L/DVB (4453): [PATCH] dibcom mod3000p + mt2060 -- remote control
+ Added support for the remote control shipped with the pen drive size
DVB-T receiver
[ID 10b8:0bc7 DiBcom DiBcom USB2.0 DVB-T reference design (MOD3000P)]
Signed-off-by: Sergei Haller <sergei@sergei-haller.de>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Patrick Boettcher [Mon, 17 Apr 2006 16:22:15 +0000 (13:22 -0300)]
V4L/DVB (4451): MT2060: IF1 Offset from EEPROM, several updates
- AGC gain set to 3
- The tuning sequence has been changed to match the DibCom driver ( from I2C
spy captures )
- For LITE-ON adapters : The IF1 frequency is now tuned according to the
calibration values stored in EEPROM.
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Olivier DANET <odanet@caramail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Olivier DANET [Tue, 8 Aug 2006 18:48:09 +0000 (15:48 -0300)]
V4L/DVB: Added support for LeadTek DVB-T USB clone
Adding the USB ids for the LeadTek clone of the STK3000P-ref-design.
Signed-off-by: Olivier DANET <odanet@caramail.com>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Patrick Boettcher [Fri, 31 Mar 2006 21:48:39 +0000 (18:48 -0300)]
V4L/DVB (4446): Add support for the Artec T14
Adding the USB IDs to dibusb-mc.c for the Artec T14 USB Stick based on STK3000P reference design.
Thanks to Thomas Rabe testing.
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Patrick Boettcher [Tue, 8 Aug 2006 18:48:09 +0000 (15:48 -0300)]
V4L/DVB: Cleanups for mt2060-integration
- some coding style fixes for newly added mt2060
- moved agc-config from fixed values in dib3000mc to configurable ones
- whitespace clean-ups for usb-id-file
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Olivier DANET [Tue, 8 Aug 2006 18:48:09 +0000 (15:48 -0300)]
V4L/DVB: Adding support for MT2060 and thus for some DVB-USB-devices based on it
- MT2060 tuner driver
- Added support for some USB DVB-T devices based on Dib3000P
Signed-off-by: Olivier DANET <odanet@caramail.com>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Chris Pascoe [Sun, 6 Aug 2006 02:47:16 +0000 (23:47 -0300)]
V4L/DVB (4441): Flexcop/nxt200x attach fix
Address another case where the test in dvb-pll to see if a tuner's
PLL responds when attaching may fail.
Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Michael Krufky [Tue, 8 Aug 2006 18:48:08 +0000 (15:48 -0300)]
V4L/DVB (4439): Whitespace cleanups for cx88-dvb and saa7134-dvb
This patch cleans up some whitespace problems after the dvb_attach changes
in cx88-dvb.c and saa7134-dvb.c, and converts some capitalized i2c address
constants to lowercase.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Michael Krufky [Tue, 8 Aug 2006 18:48:08 +0000 (15:48 -0300)]
V4L/DVB (4438): Fix dvb_pll_attach for nxt2004-based cards
The test in dvb-pll to see if a tuner's PLL responds when attaching fails
on NXT2004 based boards before the firmware is loaded.
This patch allows us to avoid this test by not passing an I2C bus handle to
the dvb_pll_attach routine, just as Chris Pascoe has done for MT352 and
ZL10353 based boards when used in cx88-dvb.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Chris Pascoe [Tue, 8 Aug 2006 18:48:08 +0000 (15:48 -0300)]
V4L/DVB (4436): Dvb-pll support for MT352/ZL10353 based tuners.
Typical wiring of MT352 and ZL10353 based tuners differs from dvb-pll's
expectation that the PLL is directly accessible. On these boards, the
PLL is actually hidden behind the demodulator, and as such can only be
accessed via the demodulator's interface. It was failing to communicate
with the PLL during an attach test and subsequently not connecting the
tuner ops.
By passing a NULL I2C bus handle to dvb_pll_attach, this accessibility
check can be bypassed. Do this for the affected boards. Also fix a
possible NULL dereference at sleep time, which would otherwise be
exposed by this change.
Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Acked-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Acked-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Yeasah Pell [Tue, 8 Aug 2006 18:48:08 +0000 (15:48 -0300)]
V4L/DVB (4435): HW algo
Change this card to use HW ALGO tuning
Signed-off-by: Yeasah Pell <yeasah@schwide.com>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Yeasah Pell [Tue, 8 Aug 2006 18:48:08 +0000 (15:48 -0300)]
V4L/DVB (4434): Change BER config
Change the bit error counter configuration to be the actual BER.
Originally it was reporting UCB.
Signed-off-by: Yeasah Pell <yeasah@schwide.com>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Yeasah Pell [Tue, 8 Aug 2006 18:48:08 +0000 (15:48 -0300)]
V4L/DVB (4433): Soft decision threshold
Set the Soft decision threshold properly for the specified FEC
Signed-off-by: Yeasah Pell <yeasah@schwide.com>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Manu Abraham [Tue, 8 Aug 2006 18:48:08 +0000 (15:48 -0300)]
V4L/DVB (4432): Fix Circular dependencies
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Andrew de Quincey [Tue, 8 Aug 2006 18:48:07 +0000 (15:48 -0300)]
V4L/DVB (4428): Fix tda826x detection
The tda826x detection was (correctly) cleaned up earlier, but unfortunately
changing the number of received i2c messages from 2 -> 1 was missed. This
fixes it.
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Andrew de Quincey [Tue, 8 Aug 2006 18:48:07 +0000 (15:48 -0300)]
V4L/DVB (4424): Add missing dvb-pll Kconfig infrastructure
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Tue, 8 Aug 2006 18:48:07 +0000 (15:48 -0300)]
V4L/DVB (4422): Improved comment for AR device and fix some typos
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Tue, 8 Aug 2006 18:48:07 +0000 (15:48 -0300)]
V4L/DVB (4421): V4L2 Conversion: saa5246a, saa5249, vino, hexium_orion, hexium_gemini
Just a few adjustments were required on those drivers to be V4L2 compliant.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Hans Verkuil [Tue, 8 Aug 2006 18:48:07 +0000 (15:48 -0300)]
V4L/DVB (4417): Add support for PAL-Nc in cx24850.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Dmitry Torokhov [Tue, 8 Aug 2006 18:48:06 +0000 (15:48 -0300)]
V4L/DVB (4413): Konicawc - handle errors from input_register_device()
Compile-tested only (no hardware)
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Alan Cox [Tue, 8 Aug 2006 18:47:50 +0000 (15:47 -0300)]
V4L/DVB (4410): Cleanups and fixes for dsbr100
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Hans J. Koch [Tue, 8 Aug 2006 12:10:12 +0000 (09:10 -0300)]
V4L/DVB (4406): Convert radio-cadet to V4L2 API
This is a card with RDS capabilities.
RDS specifications didn't change from V4L1 to V4L2, so that part should be OK.
This patch changed the following stuff:
* The device can be opened multiple times. That's necessary because there are
at least a radio application and an RDS application (rdsd) that want to
open() the device.
* Added a poll() function. Every character device should have that, and rdsd
expects it as it uses select() on that file descriptor.
* Converted the ioctls to V4L2. MUTE is not implemented correctly as the
card doesn't seem to have a special bit for that. Probably there are a few
more ioctls that should at least return 0 or an error.
As I do not own such a card, I couldn't test anything. If there is anybody out
there who owns such an ancient card, please test and report.
I just checked that the code compiles.
Signed-off-by: Hans J. Koch <koch@hjk-az.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Andrew de Quincey [Tue, 8 Aug 2006 12:10:11 +0000 (09:10 -0300)]
V4L/DVB (4405): Add missing KConfig I2C dependencies
This was breaking the build if i2c was not previously set
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Andrew de Quincey [Tue, 8 Aug 2006 12:10:11 +0000 (09:10 -0300)]
V4L/DVB (4403): Use dprintk in tda826x.
As opposed to printk() at the moment, which will fill logs uselessly
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Andrew de Quincey [Tue, 8 Aug 2006 12:10:11 +0000 (09:10 -0300)]
V4L/DVB (4402): Fix budget-ci to use dvb_frontend_detach()
I missed one call during the dvb_attach() development.
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Andrew de Quincey [Tue, 8 Aug 2006 12:10:11 +0000 (09:10 -0300)]
V4L/DVB (4401): Disable tda10086 debug by default.
Left on by accident.
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Trent Piepho [Tue, 8 Aug 2006 12:10:11 +0000 (09:10 -0300)]
V4L/DVB (4400): Tda826x: Remove 0-byte I2C write; put tuner_ops info in static struct
Remove the 0-byte write that precedes 2-byte read.
Move initialize the info field in the static tuner_ops definition, so
that it doesn't need to be done manually.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Igor M. Liplianin [Tue, 8 Aug 2006 12:10:10 +0000 (09:10 -0300)]
V4L/DVB (4398): Add support for Acorp TV134DS + FlyDVB-S cards.
Add support for Acorp TV134DS and FlyDVB-S cards (both based on
tda10086+tda826x)
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Andrew de Quincey [Tue, 8 Aug 2006 12:10:10 +0000 (09:10 -0300)]
V4L/DVB (4397): Add tda10086 support for TT DVB-S-1401
Add the necessary code and makefile infrastructure
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Andrew de Quincey [Tue, 8 Aug 2006 12:10:10 +0000 (09:10 -0300)]
V4L/DVB (4396): Add drivers for tda10086 + tda826x chips
TDA10086 is a new DVB-S demodulator
TDA826x is a DVB-S Silicon Tuner
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Andrew Morton [Tue, 8 Aug 2006 12:10:09 +0000 (09:10 -0300)]
V4L/DVB (4394): Git-dvb: radio-sf16fmi build fix
drivers/media/radio/radio-sf16fmi.c: In function 'fmi_do_ioctl':
drivers/media/radio/radio-sf16fmi.c:147: warning: implicit declaration of function 'KERNEL_VERSION'
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Andrew de Quincey [Tue, 8 Aug 2006 12:10:09 +0000 (09:10 -0300)]
V4L/DVB (4392): Fix dst_ca attach
Move the call to dst_attach into the dst_attach function to eliminate
problems caused with dvb_attach.
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Acked-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Andrew de Quincey [Tue, 8 Aug 2006 12:10:09 +0000 (09:10 -0300)]
V4L/DVB (4391): Refactor dvb_detach calls into a single dvb_frontend_detach function.
Remove buggy dvb_detach() macro and replace with unified
dvb_frontend_detach() call.
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Acked-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Andrew de Quincey [Tue, 8 Aug 2006 12:10:09 +0000 (09:10 -0300)]
V4L/DVB (4389): Remove duplication _release() op.
I added a duplicate method during one of the previous dvb_attach attempts.
This removes the unnecessary duplication.
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Acked-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Andrew de Quincey [Tue, 8 Aug 2006 12:10:09 +0000 (09:10 -0300)]
V4L/DVB (4388): Remove frontend selection from cx88/saa7134 drivers
Replaced with dvb_attach()
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Acked-by: Michael Krufky <mkrufky@linuxtv.org>
Acked-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Andrew de Quincey [Tue, 8 Aug 2006 12:10:08 +0000 (09:10 -0300)]
V4L/DVB (4387): Add Kconfig infrastructure for dvb_attach
Allow it to be en/disabled
Disable it in < 2.6.17 due to symbol_xxx() bug
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Acked-by: Michael Krufky <mkrufky@linuxtv.org>
Acked-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Andrew de Quincey [Tue, 8 Aug 2006 12:10:08 +0000 (09:10 -0300)]
V4L/DVB (4386): Convert DVB devices to use dvb_attach()
Only devices using > 1 frontend were ported; ones which did not are left
using static binding.
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Acked-by: Michael Krufky <mkrufky@linuxtv.org>
Acked-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Andrew de Quincey [Tue, 8 Aug 2006 12:10:08 +0000 (09:10 -0300)]
V4L/DVB (4385): Add dvb_attach() macro and supporting routines
Add dvb_attach() macro and supporting routines
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Acked-by: Michael Krufky <mkrufky@linuxtv.org>
Acked-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Andrew de Quincey [Tue, 8 Aug 2006 12:10:08 +0000 (09:10 -0300)]
V4L/DVB (4384): Remove remaining static function calls
Rewrote _write() calls to use write() op.
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Acked-by: Michael Krufky <mkrufky@linuxtv.org>
Acked-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Andrew de Quincey [Tue, 8 Aug 2006 12:10:08 +0000 (09:10 -0300)]
V4L/DVB (4383): Convert SEC drivers to new frontend API
Convert SEC drivers to new frontend API
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Acked-by: Michael Krufky <mkrufky@linuxtv.org>
Acked-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Andrew de Quincey [Tue, 8 Aug 2006 12:10:07 +0000 (09:10 -0300)]
V4L/DVB (4382): Dvb_attach modifications to dvb frontend structures
Add write() op
Add release_sec() op
Add change misc_priv->sec_priv data field
Acked-by: Michael Krufky <mkrufky@linuxtv.org>
Acked-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Adrian Bunk [Tue, 8 Aug 2006 12:10:07 +0000 (09:10 -0300)]
V4L/DVB (4378): Ttpci/: remove unneeded #include <linux/byteorder/swabb.h>'s
Since av7110.c is the only file actually using something from this
header, there's no reson for other files to
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mike Isely [Tue, 8 Aug 2006 12:10:07 +0000 (09:10 -0300)]
V4L/DVB (4377): Force horizontal resolution limits in the pvrusb2 driver
This change causes the pvrusb2 driver to limit horizontal resolution
to be only 720 if 24xxx device hardware is being used. This is a
workaround for an unsolved problem in the driver where if the
resolution is set to something other than 720 the video quality will
be _seriously_ degraded. It only happens on 24xxx devices (29xxx are
unaffected by the problem and unaffected by this change). Once the
problem is finally solved, this small change can be removed.
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mike Isely [Tue, 8 Aug 2006 12:10:07 +0000 (09:10 -0300)]
V4L/DVB (4376): Make it possible for run-time calculation of control min/max in pvrusb2
The internal control implementation in the pvrusb2 driver normally
encodes integer range limits using literal values in a const
structure. This change adds two function pointers, which if not null
will be called through in order to determine integer min / max
values.
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mike Isely [Tue, 8 Aug 2006 12:10:07 +0000 (09:10 -0300)]
V4L/DVB (4375): Eliminate hardcoded limits in VIDIOC_[S|TRY]_FMT for pvrusb2
The pvrusb2 implementation for VIDIOC_[S|TRY]_FMT was hardcoding
limits on the range for allowed resolution, but it would be much
better if we instead just queried the internal control for these
values. This then opens the door for the driver to adjust these
limits based on the detected hardware.
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mike Isely [Tue, 8 Aug 2006 12:10:06 +0000 (09:10 -0300)]
V4L/DVB (4372): Clean up some post mpeg-controls issues in pvrusb2
Fix a few miscellaneous issues in the pvrusb2 driver related to use of
the new mpeg controls. This also should fix problems involving
update of the saa7115 / cx25840 configuration as control changes are made.
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Tue, 8 Aug 2006 12:10:06 +0000 (09:10 -0300)]
V4L/DVB (4371): Included missing linux/version.h
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Tue, 8 Aug 2006 12:10:06 +0000 (09:10 -0300)]
V4L/DVB (4370): Fix some typos on ioctl handling function
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Trent Piepho [Tue, 8 Aug 2006 12:10:05 +0000 (09:10 -0300)]
V4L/DVB (4366): Remove of couple of useless lines
A buffer was set just before an if block, and then again in both branches
of the if. Obvious coding error.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Tue, 8 Aug 2006 12:10:05 +0000 (09:10 -0300)]
V4L/DVB (4364): V4L2 conversion: radio-maxiradio
Driver conversion to V4L2 API.
Require some testing, since this obsolete hardware is not
common those days.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Tue, 8 Aug 2006 12:10:05 +0000 (09:10 -0300)]
V4L/DVB (4363): V4L2 conversion: radio-trust
Driver conversion to V4L2 API.
Require some testing, since this obsolete hardware is not
common those days.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
David Bussenschutt [Tue, 8 Aug 2006 12:10:05 +0000 (09:10 -0300)]
V4L/DVB (4362): Cx88: Shenzhen Tungsten Ages Tech TE-DTV-250 / Swann PCI TV Tuner card support
Add support for Shenzhen Tungsten Ages Tech TE-DTV-250 OEM for
Swann PCI TV Tuner Card
Signed-off-by: David Bussenschutt <buzz@oska.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Peter Naulls [Tue, 8 Aug 2006 12:10:05 +0000 (09:10 -0300)]
V4L/DVB (4361): Cx88: add support for Norwood PCI TV Tuner (non-pro)
This patch adds support for Norwood PCI TV Tuner (non-pro)
Signed-off-by: Peter Naulls <peter@chocky.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Michael Krufky [Tue, 8 Aug 2006 12:10:04 +0000 (09:10 -0300)]
V4L/DVB (4360): Cx88: add autodetection support for AverMedia M150-D
This patch adds autodetection support for the AverMedia M150-D
blackbird MPEG encoder / analog video capture card.
This board is known to work with the ASUS PVR 416 configuration.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Eric Thomas [Tue, 8 Aug 2006 12:10:04 +0000 (09:10 -0300)]
V4L/DVB (4359): Cx88: add initial support for Hauppauge HVR3000 trimode card
add initial support for Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T
only analog is working for now
Signed-off-by: Eric Thomas <ethomas@claranet.fr>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Tue, 8 Aug 2006 12:10:04 +0000 (09:10 -0300)]
V4L/DVB (4358): V4L2 conversion: radio-zoltrix
Driver conversion to V4L2 API.
Require some testing, since this obsolete hardware is not
common those days.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Tue, 8 Aug 2006 12:10:04 +0000 (09:10 -0300)]
V4L/DVB (4357): V4L2 conversion: radio-typhoon
Driver conversion to V4L2 API.
Require some testing, since this obsolete hardware is not
common those days.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Tue, 8 Aug 2006 12:10:03 +0000 (09:10 -0300)]
V4L/DVB (4356): V4L2 conversion: radio-terratec
Driver conversion to V4L2 API.
Require some testing, since this obsolete hardware is not
common those days.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Tue, 8 Aug 2006 12:10:02 +0000 (09:10 -0300)]
V4L/DVB (4355): V4L2 conversion: radio-sf16fmr2
Driver conversion to V4L2 API.
Require some testing, since this obsolete hardware is not
common those days.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Tue, 8 Aug 2006 12:10:02 +0000 (09:10 -0300)]
V4L/DVB (4354): A small fix at fmi->flags logic
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Tue, 8 Aug 2006 12:10:02 +0000 (09:10 -0300)]
V4L/DVB (4353): V4L2 conversion: radio-sf16fmi
Driver conversion to V4L2 API.
Require some testing, since this obsolete hardware is not
common those days.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Tue, 8 Aug 2006 12:10:02 +0000 (09:10 -0300)]
V4L/DVB (4352): V4L2 conversion: radio-rtrack2
Driver conversion to V4L2 API.
Require some testing, since this obsolete hardware is not
common those days.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Tue, 8 Aug 2006 12:10:02 +0000 (09:10 -0300)]
V4L/DVB (4351): V4L2 conversion: radio-maestro
Driver conversion to V4L2 API.
Require some testing, since I don't have such hardware
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Tue, 8 Aug 2006 12:10:01 +0000 (09:10 -0300)]
V4L/DVB (4350): V4L2 conversion: radio_gemtek-pci
Driver conversion to V4L2 API.
Require some testing, since this obsolete hardware is not
common those days.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Tue, 8 Aug 2006 12:10:01 +0000 (09:10 -0300)]
V4L/DVB (4349): V4L2 conversion: radio_gemtek
Driver conversion to V4L2 API.
Require some testing, since this obsolete hardware is not
common those days.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Tue, 8 Aug 2006 12:10:01 +0000 (09:10 -0300)]
V4L/DVB (4348): Fix: compile for radio aimslab and aztech with V4L2 only
All radio devices use an obsolete mode of opening/release driver.
Since this is not V4L1 core, better to keep the method available for more
time than to rewrite open/release without a radio device to test, since the
newer method is much more complex than the previous one (although providing
support for multiple opens and multiple devices).
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
This page took 0.042149 seconds and 5 git commands to generate.