Rafael J. Wysocki [Wed, 7 Jul 2010 22:42:51 +0000 (00:42 +0200)]
ACPI: Fix bogus GPE test in acpi_bus_set_run_wake_flags()
When we check if a GPE can be used for runtime signaling, we only
search the FADT GPE blocks, which is incorrect, becuase the GPE
may be located elsewhere. We really should be using the GPE device
information previously returned by _PRW here, so make that happen.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
Bob Moore [Tue, 6 Jul 2010 02:39:01 +0000 (10:39 +0800)]
ACPICA: Update version to
20100702
Version
20100702.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Bob Moore [Tue, 6 Jul 2010 02:37:13 +0000 (10:37 +0800)]
ACPICA: Fix for Alias references within Package objects
This fixes a problem where a reference to an Alias within the
definition of a Package was not always resolved properly. Aliases
to objects like Processors, ThermalZones, etc. were resolved to the
actual object instead of a reference to the object as it should be.
Package objects are only allowed to contain integer, string,
buffer, package, and reference objects.
https://bugzilla.redhat.com/show_bug.cgi?id=608648
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Bob Moore [Tue, 6 Jul 2010 02:35:55 +0000 (10:35 +0800)]
ACPICA: Fix lint warning for 64-bit constant
cast to u64.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Bob Moore [Tue, 6 Jul 2010 02:30:37 +0000 (10:30 +0800)]
ACPICA: Remove obsolete GPE function
Remove acpi_hw_write_gpe_enable_reg, it had been reduced down to a
single line of code, and called from only one place.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Bob Moore [Tue, 6 Jul 2010 02:02:16 +0000 (10:02 +0800)]
ACPICA: Update debug output components
Add data table compiler output component
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Bob Moore [Tue, 6 Jul 2010 01:58:11 +0000 (09:58 +0800)]
ACPICA: Add support for WDDT - Watchdog Descriptor Table
Header file support.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Rafael J. Wysocki [Thu, 1 Jul 2010 03:07:20 +0000 (11:07 +0800)]
ACPICA: Drop acpi_set_gpe
The acpi_set_gpe() function is a little awkward, because it doesn't
really work as advertised in the "disable" case. Namely, if a GPE
has been enabled with acpi_enable_gpe() and triggered a notification
to occur, and if acpi_set_gpe() is used to disable it before
acpi_ev_asynch_enable_gpe() runs, the GPE will be immediately enabled
by the latter as though the acpi_set_gpe() had no effect.
Thus, since it's been possible to make all of its callers use
alternative operations to disable or enable GPEs, acpi_set_gpe() can
be dropped.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
Rafael J. Wysocki [Thu, 1 Jul 2010 03:01:12 +0000 (11:01 +0800)]
ACPICA: Use low-level GPE enable during GPE block initialization
The GPE block initialization code in acpi_ev_initialize_gpe_block()
uses acpi_set_gpe() to make sure that the GPEs with nonzero
runtime counter will remain enabled, but since it already has
a struct acpi_gpe_event_info object for each GPE, it might use
the low-level GPE enabling function, acpi_clear_and_enable_gpe(),
for this purpose.
To make that happen, move acpi_clear_and_enable_gpe() to
drivers/acpi/acpica/evgpe.c and rename it to acpi_ev_enable_gpe(),
modify the two existing users of it accordingly and modify
acpi_ev_initialize_gpe_block() to use it instead of acpi_set_gpe()
and to check its return value.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Rafael J. Wysocki [Thu, 24 Jun 2010 23:21:42 +0000 (01:21 +0200)]
ACPI / EC: Do not use acpi_set_gpe
The EC driver is the last user of acpi_set_gpe() and since it is
guaranteed that the EC GPE will not be shared, acpi_disable_gpe()
and acpi_enable_gpe() may be used for disabling the GPE temporarilty
if a GPE storm is detected and re-enabling it during EC transactions.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
Rafael J. Wysocki [Thu, 24 Jun 2010 23:20:38 +0000 (01:20 +0200)]
ACPI / EC: Drop suspend and resume routines
The suspend and resume routines provided by the EC driver are not
really necessary, because the handler of the GPE disabled by them
is not going to be executed after suspend_device_irqs() and before
resume_device_irqs() anyway.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
Rafael J. Wysocki [Thu, 1 Jul 2010 02:11:45 +0000 (10:11 +0800)]
ACPICA: Remove wakeup GPE reference counting which is not used
After the previous patch that introduced acpi_gpe_wakeup() and
modified the ACPI suspend and wakeup code to use it, the third
argument of acpi_{enable|disable}_gpe() and the GPE wakeup
reference counter are not necessary any more. Remove them and
modify all of the users of acpi_{enable|disable}_gpe()
accordingly. Also drop GPE type constants that aren't used
any more.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Rafael J. Wysocki [Thu, 24 Jun 2010 23:18:39 +0000 (01:18 +0200)]
ACPICA: Introduce acpi_gpe_wakeup()
ACPICA uses reference counters to avoid disabling GPEs too early in
case they have been enabled for many times. This is done separately
for runtime and for wakeup, but the wakeup GPE reference counter is
not really necessary, because GPEs are only enabled to wake up the
system at the hardware level by acpi_enter_sleep_state(). Thus it
only is necessary to set the corresponding bits in the wakeup enable
masks of these GPEs' registers right before the system enters a sleep
state. Moreover, the GPE wakeup enable bits can only be set when the
target sleep state of the system is known and they need to be cleared
immediately after wakeup regardless of how many wakeup devices are
associated with a given GPE.
On the basis of the above observations, introduce function
acpi_gpe_wakeup() to be used for setting or clearing the enable bit
corresponding to a given GPE in its enable register's enable_for_wake
mask. Modify the ACPI suspend and wakeup code the use
acpi_gpe_wakeup() instead of acpi_{enable|disable}_gpe() to set
and clear GPE enable bits in their registers' enable_for_wake masks
during system transitions to a sleep state and back to the working
state, respectively. [This will allow us to drop the third
argument of acpi_{enable|disable}_gpe() and simplify the GPE
handling code.]
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Lin Ming [Thu, 1 Jul 2010 02:07:17 +0000 (10:07 +0800)]
ACPICA: Rename acpi_hw_gpe_register_bit
Rename acpi_hw_gpe_register_bit to acpi_hw_get_gpe_register_bit
in order to be same with ACPICA code base.
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Bob Moore [Mon, 31 May 2010 01:23:22 +0000 (09:23 +0800)]
ACPICA: Update version to
20100528
Version
20100528.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Bob Moore [Mon, 31 May 2010 01:22:12 +0000 (09:22 +0800)]
ACPICA: Add signatures for undefined tables: ATKG, GSCI, IEIT
These ACPI tables have been seen in the field, but the actual
table definitions are unkown at this time.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Alexey Starikovskiy [Wed, 26 May 2010 05:59:51 +0000 (13:59 +0800)]
ACPICA: Optimization: Reduce the number of namespace walks
On control method exit, only walk the namespace if the method is
known to have created namespace objects outside of its local scope.
Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Bob Moore [Thu, 27 May 2010 01:27:34 +0000 (09:27 +0800)]
ACPICA: Update flags for operand object
Remove obsolete AOPOBJ_SINGLE_DATUM. Add AOPOBJ_INVALID for
use if the host OS rejects the address of an operation region
(currently only used by Linux.)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Alexey Starikovskiy [Wed, 26 May 2010 03:53:07 +0000 (11:53 +0800)]
ACPICA: Performance enhancement for namespace search and access
This change enhances the performance of namespace searches and
walks by adding a backpointer to the parent in each namespace
node. On large namespaces, this change can improve overall ACPI
performance by up to 9X. Adding a pointer to each namespace node
increases the overall size of the internal namespace by about 5%,
since each namespace entry usually consists of both a namespace
node and an ACPI operand object.
Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Bob Moore [Wed, 26 May 2010 03:48:22 +0000 (11:48 +0800)]
ACPICA: Expand device initialization counters to 32 bits
Expand the various device initialization counters from 16-bit
to 32-bit. Allows for very large namespaces.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Bob Moore [Wed, 26 May 2010 03:47:13 +0000 (11:47 +0800)]
ACPICA: Core: Replace all %d format specifiers with %u (unsigned)
With only a few exceptions, ACPICA does not use signed integers.
Therefore, %d is incorrect.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Alexey Starikovskiy [Wed, 26 May 2010 03:20:47 +0000 (11:20 +0800)]
ACPICA: Expand initialization counters to 32 bits
Expand the various initialization counters from 16-bit to 32-bit.
Allows for very large namespaces.
Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Bob Moore [Wed, 26 May 2010 03:18:35 +0000 (11:18 +0800)]
ACPICA: iASL/Core: Add support for _WDG/_WED MS methods
These objects are defined by "Windows Instrumentation", and are
not part of the ACPI spec. Adds compiler support and runtime
typechecking support in the ACPICA core. ACPICA BZ 860.
http://www.acpica.org/bugzilla/show_bug.cgi?id=860
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Bob Moore [Wed, 26 May 2010 03:03:56 +0000 (11:03 +0800)]
ACPICA: Add comment: _BCL cannot be sorted on the fly
Because of package index values used for _BQC and _BCM.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Linus Torvalds [Mon, 5 Jul 2010 03:22:50 +0000 (20:22 -0700)]
Linux 2.6.35-rc4
Linus Torvalds [Mon, 5 Jul 2010 03:21:39 +0000 (20:21 -0700)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
ARM: 6205/1: perf: ensure counter delta is treated as unsigned
ARM: 6202/1: Do not ARM_DMA_MEM_BUFFERABLE on RealView boards with L210/L220
ARM: 6201/1: RealView: Do not use outer_sync() on ARM11MPCore boards with L220
ARM: 6195/1: OMAP3: pmu: make CPU_HAS_PMU dependent on OMAP3_EMU
ARM: 6194/1: change definition of cpu_relax() for ARM11MPCore
ARM: 6193/1: RealView: Align the machine_desc.phys_io to 1MB section
ARM: 6192/1: VExpress: Align the machine_desc.phys_io to 1MB section
ARM: 6188/1: Add a config option for the ARM11MPCore DMA cache maintenance workaround
ARM: 6187/1: The v6_dma_inv_range() function must preserve data on SMP
ARM: 6186/1: Avoid the CONSISTENT_DMA_SIZE warning on noMMU builds
ARM: mx3: mx31lilly: fix build error for !CONFIG_USB_ULPI
[ARM] mmp: fix build failure due to IRQ_PMU depends on ARCH_PXA
[ARM] pxa/mioa701: fix camera regression
[ARM] pxa/z2: fix flash layout to final version
[ARM] pxa/z2: fix missing include in battery driver
[ARM] pxa: fix incorrect gpio type in udc_pxa2xx.h
Linus Torvalds [Mon, 5 Jul 2010 03:20:53 +0000 (20:20 -0700)]
Merge branch 'perf-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf, x86: Fix incorrect branches event on AMD CPUs
perf tools: Fix find tids routine by excluding "." and ".."
x86: Send a SIGTRAP for user icebp traps
Yehuda Sadeh [Sat, 3 Jul 2010 03:07:35 +0000 (13:07 +1000)]
module: initialize module dynamic debug later
We should initialize the module dynamic debug datastructures
only after determining that the module is not loaded yet. This
fixes a bug that introduced in 2.6.35-rc2, where when a trying
to load a module twice, we also load it's dynamic printing data
twice which causes all sorts of nasty issues. Also handle
the dynamic debug cleanup later on failure.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (removed a #ifdef)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 5 Jul 2010 03:13:31 +0000 (20:13 -0700)]
Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs
* 'for-linus' of git://oss.sgi.com/xfs/xfs:
xfs: remove block number from inode lookup code
xfs: rename XFS_IGET_BULKSTAT to XFS_IGET_UNTRUSTED
xfs: validate untrusted inode numbers during lookup
xfs: always use iget in bulkstat
xfs: prevent swapext from operating on write-only files
Linus Torvalds [Mon, 5 Jul 2010 03:12:31 +0000 (20:12 -0700)]
Merge branch 'merge-devicetree' of git://git.secretlab.ca/git/linux-2.6
* 'merge-devicetree' of git://git.secretlab.ca/git/linux-2.6:
of/dma: fix build breakage in ppc4xx adma driver
Linus Torvalds [Mon, 5 Jul 2010 03:12:06 +0000 (20:12 -0700)]
Merge branch 'for_linus' of git://git./linux/kernel/git/mchehab/i7core
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/i7core:
MAINTAINERS: Add an entry for i7core_edac
i7core_edac: Avoid doing multiple probes for the same card
i7core_edac: Properly discover the first QPI device
Linus Torvalds [Mon, 5 Jul 2010 02:55:23 +0000 (19:55 -0700)]
Merge branch 'rc-fixes' of git://git./linux/kernel/git/mmarek/kbuild-2.6
* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
kbuild: Propagate LOCALVERSION= down to scripts/setlocalversion
kbuild: Clean up and speed up the localversion logic
Will Deacon [Fri, 2 Jul 2010 15:41:52 +0000 (16:41 +0100)]
ARM: 6205/1: perf: ensure counter delta is treated as unsigned
Hardware performance counters on ARM are 32-bits wide but atomic64_t
variables are used to represent counter data in the hw_perf_event structure.
The armpmu_event_update function right-shifts a signed 64-bit delta variable
and adds the result to the event count. This can lead to shifting in sign-bits
if the MSB of the 32-bit counter value is set. This results in perf output
such as:
Performance counter stats for 'sleep 20':
18446744073460670464 cycles <-- 0xFFFFFFFFF12A6000
7783773 instructions # 0.000 IPC
465 context-switches
161 page-faults
1172393 branches
20.
154242147 seconds time elapsed
This patch ensures that the delta value is treated as unsigned so that the
right shift sets the upper bits to zero.
Cc: <stable@kernel.org>
Acked-by: Jamie Iles <jamie.iles@picochip.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Vince Weaver [Thu, 1 Jul 2010 19:30:16 +0000 (15:30 -0400)]
perf, x86: Fix incorrect branches event on AMD CPUs
While doing some performance counter validation tests on some
assembly language programs I noticed that the "branches:u"
count was very wrong on AMD machines.
It looks like the wrong event was selected.
Signed-off-by: Vince Weaver <vweaver1@eecs.utk.edu>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: <stable@kernel.org>
LKML-Reference: <alpine.DEB.2.00.
1007011526010.23160@cl320.eecs.utk.edu>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Dan Williams [Fri, 2 Jul 2010 21:46:17 +0000 (15:46 -0600)]
of/dma: fix build breakage in ppc4xx adma driver
Convert ppc4xx adma driver to use new node pointer location
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Mauro Carvalho Chehab [Wed, 30 Jun 2010 04:45:28 +0000 (01:45 -0300)]
MAINTAINERS: Add an entry for i7core_edac
While here, fixes the mailing list for i5400_edac
Acked-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 30 Jun 2010 04:42:21 +0000 (01:42 -0300)]
i7core_edac: Avoid doing multiple probes for the same card
As Nehalem/Nehalem-EP/Westmere devices uses several devices for the same
functionality (memory controller), the default way of proping devices doesn't
work. So, instead of a per-device probe, all devices should be probed at once.
This means that we should block any new attempt of probe, otherwise, it will
try to register the same device several times.
Acked-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 30 Jun 2010 04:41:35 +0000 (01:41 -0300)]
i7core_edac: Properly discover the first QPI device
On Nehalem/Nehalem-EP/Westmere, the first QPI device is the last PCI bus.
The last bus is generally at 0x3f or 0xff, but there are also other systems
using different setups. For example, HP Z800 has 0x7f as the last bus.
This patch adds a logic to discover the last bus, dynamically detecting it
at runtime.
Acked-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Linus Torvalds [Fri, 2 Jul 2010 16:52:58 +0000 (09:52 -0700)]
Merge branch 'sched-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sched: Cure nr_iowait_cpu() users
init: Fix comment
init, sched: Fix race between init and kthreadd
Linus Torvalds [Fri, 2 Jul 2010 16:52:31 +0000 (09:52 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/bp/bp
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
amd64_edac: Fix syndrome calculation on K8
Borislav Petkov [Fri, 2 Jul 2010 15:02:43 +0000 (17:02 +0200)]
amd64_edac: Fix syndrome calculation on K8
When calculating the DCT channel from the syndrome we need to know the
syndrome type (x4 vs x8). On F10h, this is read out from extended PCI
cfg space register F3x180 while on K8 we only support x4 syndromes and
don't have extended PCI config space anyway.
Make the code accessing F3x180 F10h only and fall back to x4 syndromes
on everything else.
Cc: <stable@kernel.org> # .33.x .34.x
Reported-by: Jeffrey Merkey <jeffmerkey@gmail.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Michal Marek [Fri, 2 Jul 2010 09:56:52 +0000 (11:56 +0200)]
Merge branch 'setlocalversion-speedup' into kbuild/rc-fixes
Conflicts:
Makefile
Catalin Marinas [Thu, 1 Jul 2010 12:22:48 +0000 (13:22 +0100)]
ARM: 6202/1: Do not ARM_DMA_MEM_BUFFERABLE on RealView boards with L210/L220
RealView boards with certain revisions of the L210/L220 cache controller
may have issues (hardware deadlock) with the mandatory barriers (DSB
followed by an L2 cache sync) when ARM_DMA_MEM_BUFFERABLE is enabled.
The patch disables ARM_DMA_MEM_BUFFERABLE for these boards.
Tested-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Catalin Marinas [Thu, 1 Jul 2010 12:21:47 +0000 (13:21 +0100)]
ARM: 6201/1: RealView: Do not use outer_sync() on ARM11MPCore boards with L220
RealView boards with certain revisions of the L220 cache controller (ARM11*
processors only) may have issues (hardware deadlock) with the recent changes to
the mb() barrier implementation (DSB followed by an L2 cache sync). The patch
redefines the RealView ARM11MPCore mandatory barriers without the outer_sync()
call.
Cc: <stable@kernel.org>
Tested-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Linus Torvalds [Fri, 2 Jul 2010 01:48:11 +0000 (18:48 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/anholt/drm-intel
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel:
drm/i915: fix page flip finish vs. prepare on plane B
drm/i915: change default panel fitting mode to preserve aspect ratio
drm/i915: fix uninitialized variable warning in i915_setup_compression()
drm/i915: take struct_mutex in i915_dma_cleanup()
drm/i915: Fix CRT hotplug regression in 2.6.35-rc1
i915: fix ironlake edp panel setup (v4)
drm/i915: don't access FW_BLC_SELF on 965G
drm/i915: Account for space on the ring buffer consumed whilst wrapping.
drm/i915: gen3 page flipping fixes
drm/i915: don't queue flips during a flip pending event
drm/i915: Fix incorrect intel_ring_begin size in BSD ringbuffer.
drm/i915: Turn on 945 self-refresh only if single CRTC is active
drm/i915/gen4: Fix interrupt setup ordering
drm/i915: Use RSEN instead of HTPLG for tfp410 monitor detection.
drm/i915: Move non-phys cursors into the GTT
Revert "drm/i915: Don't enable pipe/plane/VCO early (wait for DPMS on)."
(Included the "fix page flip finish vs. prepare on plane B" patch from
Jesse on top of the pull request from Eric. -- Linus)
Jesse Barnes [Thu, 1 Jul 2010 11:45:43 +0000 (04:45 -0700)]
drm/i915: fix page flip finish vs. prepare on plane B
The refreshed patch had a copy & paste bug.
Reported-by: Simon Farnsworth <simon.farnsworth@onelan.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 2 Jul 2010 01:40:54 +0000 (18:40 -0700)]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
ata_generic: implement ATA_GEN_* flags and force enable DMA on MBP 7,1
ahci,ata_generic: let ata_generic handle new MBP w/ MCP89
libahci: Fix bug in storing EM messages
Daniel J Blueman [Thu, 1 Jul 2010 22:27:11 +0000 (23:27 +0100)]
correct console log level when ERST ACPI table is not found
When booting 2.6.35-rc3 on a x86 system without an ERST ACPI table with
the 'quiet' option, we still observe an "ERST: Table is not found!"
warning.
Quiesce it to the same info log level as the other 'table not found'
warnings.
Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 2 Jul 2010 00:04:42 +0000 (10:04 +1000)]
drm/i915: fix hibernation since i915 self-reclaim fixes
Since commit
4bdadb9785696439c6e2b3efe34aa76df1149c83 ("drm/i915:
Selectively enable self-reclaim"), we've been passing GFP_MOVABLE to the
i915 page allocator where we weren't before due to some over-eager
removal of the page mapping gfp_flags games the code used to play.
This caused hibernate on Intel hardware to result in a lot of memory
corruptions on resume. See for example
http://bugzilla.kernel.org/show_bug.cgi?id=13811
Reported-by: Evengi Golov (in bugzilla)
Signed-off-by: Dave Airlie <airlied@redhat.com>
Tested-by: M. Vefa Bicakci <bicave@superonline.com>
Cc: stable@kernel.org
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jesse Barnes [Thu, 24 Jun 2010 18:05:10 +0000 (11:05 -0700)]
drm/i915: change default panel fitting mode to preserve aspect ratio
We did this a long time ago in the DDX driver, but now this fix belongs
in the kernel.
Preserving the aspect ratio is a nicer default.
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=18033.
Tested-by: Josh Triplett <josh@freedesktop.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Prarit Bhargava [Thu, 27 May 2010 17:37:56 +0000 (13:37 -0400)]
drm/i915: fix uninitialized variable warning in i915_setup_compression()
Fixes:
drivers/gpu/drm/i915/i915_dma.c: In function ‘i915_setup_compression’:
drivers/gpu/drm/i915/i915_dma.c:1311: error: ‘compressed_llb’ may be used uninitialized in this function
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Dan Carpenter [Wed, 23 Jun 2010 11:19:55 +0000 (13:19 +0200)]
drm/i915: take struct_mutex in i915_dma_cleanup()
intel_cleanup_ring_buffer() calls drm_gem_object_unreference() (as
opposed to drm_gem_object_unreference_unlocked()) so it needs to be
called with "struct_mutex" held. If we don't hold the lock, it triggers
a BUG_ON(!mutex_is_locked(&dev->struct_mutex));
I also audited the other places that call intel_cleanup_ring_buffer()
and they all hold the lock so they're OK.
This was introduced in:
8187a2b70e3 "drm/i915: introduce
intel_ring_buffer structure (V2)" and it's a regression from v2.6.34.
Addresses: https://bugzilla.kernel.org/show_bug.cgi?id=16247
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reported-by: Benny Halevy <bhalevy@panasas.com>
Tested-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Andy Lutomirski [Sat, 12 Jun 2010 09:21:18 +0000 (05:21 -0400)]
drm/i915: Fix CRT hotplug regression in 2.6.35-rc1
Commit
7a772c492fcfffae812ffca78a628e76fa57fe58 has two bugs which
made the hotplug problems on my laptop worse instead of better.
First, it did not, in fact, disable the CRT plug interrupt -- it
disabled all the other hotplug interrupts. It seems rather doubtful
that that bit of the patch fixed anything, so let's just remove it.
(If you want to add it back, you probably meant ~CRT_HOTPLUG_INT_EN.)
Second, on at least my GM45, setting CRT_HOTPLUG_ACTIVATION_PERIOD_64
and CRT_HOTPLUG_VOLTAGE_COMPARE_50 (when they were previously unset)
causes a hotplug interrupt about three seconds later. The old code
never restored PORT_HOTPLUG_EN so this could only happen once, but
they new code restores those registers. So just set those bits when
we set up the interrupt in the first place.
Signed-off-by: Andy Lutomirski <luto@mit.edu>
Signed-off-by: Eric Anholt <eric@anholt.net>
Dave Airlie [Wed, 30 Jun 2010 01:46:17 +0000 (11:46 +1000)]
i915: fix ironlake edp panel setup (v4)
The eDP spec claims a 20% overhead for the 8:10 encoding scheme used
on the wire. Take this into account when picking the lane/clock speed
for the panel.
v3: some panels are out of spec, try our best to deal with them, don't
refuse modes on eDP panels, and try the largest allowed settings if
all else fails on eDP.
v4: fix stupid typo, forgot to git add before amending.
Fixes several reports in bugzilla:
https://bugs.freedesktop.org/show_bug.cgi?id=28070
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Jesse Barnes [Wed, 30 Jun 2010 20:49:37 +0000 (13:49 -0700)]
drm/i915: don't access FW_BLC_SELF on 965G
The register offset for FW_BLC_SELF is a totally different set of bits
on Broadwater (it's actually MI_RDRET_STATE), so don't treat it like
FW_BLC_SELF on 965G chips.
Fixes bug https://bugs.freedesktop.org/show_bug.cgi?id=26874.
Cc: stable@kernel.org
Tested-by: Norman Yarvin <yarvin@yarchive.net>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Chris Wilson [Thu, 1 Jul 2010 16:53:00 +0000 (17:53 +0100)]
drm/i915: Account for space on the ring buffer consumed whilst wrapping.
If we fill the tail of the physical ring buffer with NOOP when wrapping,
we need to account for the reduction in available space.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>
Tejun Heo [Tue, 22 Jun 2010 10:27:26 +0000 (12:27 +0200)]
ata_generic: implement ATA_GEN_* flags and force enable DMA on MBP 7,1
IDE mode of MCP89 on MBP 7,1 doesn't set DMA enable bits in the BMDMA
status register. Make the following changes to work around the problem.
* Instead of using hard coded 1 in id->driver_data as class code
match, use ATA_GEN_CLASS_MATCH and carry the matched id in
host->private_data.
* Instead of matching PCI_VENDOR_ID_CENATEK, use ATA_GEN_FORCE_DMA
flag in id instead.
* Add ATA_GEN_FORCE_DMA to the id entry of MBP 7,1.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Peer Chen <pchen@nvidia.com>
Cc: stable@kernel.org
Reported-by: Anders Østhus <grapz666@gmail.com>
Reported-by: Andreas Graf <andreas_graf@csgraf.de>
Reported-by: Benoit Gschwind <gschwind@gnu-log.net>
Reported-by: Damien Cassou <damien.cassou@gmail.com>
Reported-by: tixetsal@juno.com
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Tejun Heo [Thu, 17 Jun 2010 09:42:22 +0000 (11:42 +0200)]
ahci,ata_generic: let ata_generic handle new MBP w/ MCP89
For yet unknown reason, MCP89 on MBP 7,1 doesn't work w/ ahci under
linux but the controller doesn't require explicit mode setting and
works fine with ata_generic. Make ahci ignore the controller on MBP
7,1 and let ata_generic take it for now.
Reported in bko#15923.
https://bugzilla.kernel.org/show_bug.cgi?id=15923
NVIDIA is investigating why ahci mode doesn't work.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Peer Chen <pchen@nvidia.com>
Cc: stable@kernel.org
Reported-by: Anders Østhus <grapz666@gmail.com>
Reported-by: Andreas Graf <andreas_graf@csgraf.de>
Reported-by: Benoit Gschwind <gschwind@gnu-log.net>
Reported-by: Damien Cassou <damien.cassou@gmail.com>
Reported-by: tixetsal@juno.com
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Harry Zhang [Thu, 24 Jun 2010 03:34:23 +0000 (11:34 +0800)]
libahci: Fix bug in storing EM messages
In function ahci_store_em_buffer(), if the input (signed char*) buffer
contains negative data, the constructed 32-bit long message data may
be wrong.
Signed-off-by: Harry Zhang <harry.zhang@amd.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Gui Jianfeng [Wed, 16 Jun 2010 05:21:44 +0000 (13:21 +0800)]
perf tools: Fix find tids routine by excluding "." and ".."
Introduce a filter function to skip "." and ".." directories when calculating
tid number, otherwise tid 0 will be included in the all_tid result array.
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <
4C185F68.
1020505@cn.fujitsu.com>
Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus Torvalds [Thu, 1 Jul 2010 16:37:12 +0000 (09:37 -0700)]
Merge git://git./linux/kernel/git/wim/linux-2.6-watchdog
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
watchdog: docs: add an entry for imx2_wdt
Linus Torvalds [Thu, 1 Jul 2010 16:36:49 +0000 (09:36 -0700)]
Merge branch 'drm-fixes' of git://git./linux/kernel/git/airlied/drm-2.6
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (27 commits)
drm/radeon/kms: remove rv100 bios connector quirk
drm/radeon/kms/pm: fix power state indexing on igp chips in dynpm mode
DRM / radeon / KMS: Fix hibernation regression related to radeon PM (was: Re: [Regression, post-2.6.34] Hibernation broken on machines with radeon/KMS and r300)
drm/radeon/kms/igp: fix possible divide by 0 in bandwidth code (v2)
drm/radeon: add quirk to make HP nx6125 laptop resume.
drm/radeon/kms: add some missing regs to evergreen gpu init
drm/radeon/kms: fix typos in evergreen command checker
drm/radeon/kms: avoid oops on mac r4xx cards
fb: fix colliding defines for fb flags.
drm/radeon/kms: Force HDP_NONSURF to maximum size
drm/radeon/kms: disable frac fb dividers for rs6xx
drm/radeon/kms: don't read attempt to read bios from VRAM on unposted GPU.
drm/radeon/kms: fix typo in evergreen_gpu_init
drm/radeon/kms: return ret in cursor_set failure path
drm/ttm: non pooled page allocation should have GFP_USER set
drm/radeon/r100/r200: fix calculation of compressed cube maps
drm/radeon/r200: handle more hw tex coord types
drm/radeon/kms: CS checker texture fixes for r1xx/r2xx/r3xx
drm/radeon: add fake RN50 table for powerpc
drm/fb: Fix video= mode computation
...
Linus Torvalds [Thu, 1 Jul 2010 16:36:15 +0000 (09:36 -0700)]
Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
[IA64] Fix spinaphore down_spin()
Fabio Estevam [Thu, 24 Jun 2010 16:43:25 +0000 (09:43 -0700)]
watchdog: docs: add an entry for imx2_wdt
Add an entry for imx2_wdt in watchdog-parameters.txt
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Russell King [Thu, 1 Jul 2010 10:01:33 +0000 (11:01 +0100)]
Merge branch 'imx-for-2.6.35' of git://git.pengutronix.de/git/imx/linux-2.6
Russell King [Thu, 1 Jul 2010 09:16:00 +0000 (10:16 +0100)]
Merge branch 'fix' of git://git./linux/kernel/git/ycmiao/pxa-linux-2.6
Will Deacon [Mon, 21 Jun 2010 14:32:54 +0000 (15:32 +0100)]
ARM: 6195/1: OMAP3: pmu: make CPU_HAS_PMU dependent on OMAP3_EMU
CPU performance event counters on v7 cores will only operate
if either the NIDEN or DBGEN signals are driven high.
For the OMAP3 platform, these signals are driven low by default
but DBGEN can be asserted by selecting the OMAP3_EMU Kconfig option,
which enables the virtual clock for hardware debugging peripherals.
Acked-by: Jean Pihet <jpihet@mvista.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Will Deacon [Mon, 21 Jun 2010 14:29:03 +0000 (15:29 +0100)]
ARM: 6194/1: change definition of cpu_relax() for ARM11MPCore
Linux expects that if a CPU modifies a memory location, then that
modification will eventually become visible to other CPUs in the system.
On an ARM11MPCore processor, loads are prioritised over stores so it is
possible for a store operation to be postponed if a polling loop immediately
follows it. If the variable being polled indirectly depends on the outstanding
store [for example, another CPU may be polling the variable that is pending
modification] then there is the potential for deadlock if interrupts are
disabled. This deadlock occurs in the KGDB testsuire when executing on an
SMP ARM11MPCore configuration.
This patch changes the definition of cpu_relax() to smp_mb() for ARMv6 cores,
forcing a flushing of the write buffer on SMP systems before the next load
takes place. If the Kernel is not compiled for SMP support, this will expand
to a barrier() as before.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Catalin Marinas [Mon, 21 Jun 2010 14:12:40 +0000 (15:12 +0100)]
ARM: 6193/1: RealView: Align the machine_desc.phys_io to 1MB section
When not aligned, random bits could be written in the initial page table
by the __create_page_tables() function.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Catalin Marinas [Mon, 21 Jun 2010 14:12:09 +0000 (15:12 +0100)]
ARM: 6192/1: VExpress: Align the machine_desc.phys_io to 1MB section
When not aligned, random bits could be written in the initial page table
by the __create_page_tables() function.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Catalin Marinas [Mon, 21 Jun 2010 14:10:07 +0000 (15:10 +0100)]
ARM: 6188/1: Add a config option for the ARM11MPCore DMA cache maintenance workaround
Commit
f4d6477f introduced a workaround for the lack of hardware
broadcasting of the cache maintenance operations on ARM11MPCore.
However, the workaround is only valid on CPUs that do not do speculative
loads into the D-cache.
This patch adds a Kconfig option with the corresponding help to make the
above clear. When the DMA_CACHE_RWFO option is disabled, the kernel
behaviour is that prior to the
f4d6477f commit. This also allows ARMv6
UP processors with speculative loads to work correctly.
For other processors, a different workaround may be needed.
Cc: Ronen Shitrit <rshitrit@marvell.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Catalin Marinas [Mon, 21 Jun 2010 14:09:36 +0000 (15:09 +0100)]
ARM: 6187/1: The v6_dma_inv_range() function must preserve data on SMP
A recent patch for DMA cache maintenance on ARM11MPCore added a write
for ownership trick to the v6_dma_inv_range() function. Such operation
destroys data already present in the buffer. However, this function is
used with with dma_sync_single_for_device() which is supposed to
preserve the existing data transfered into the buffer. This patch adds a
combination of read/write for ownership to preserve the original data.
Reported-by: Ronen Shitrit <rshitrit@marvell.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Catalin Marinas [Mon, 21 Jun 2010 14:09:06 +0000 (15:09 +0100)]
ARM: 6186/1: Avoid the CONSISTENT_DMA_SIZE warning on noMMU builds
This macro is not defined when !CONFIG_MMU so this patch moves the
CONSISTENT_* definitions to the CONFIG_MMU section.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Daniel Mack [Tue, 25 May 2010 14:46:55 +0000 (16:46 +0200)]
ARM: mx3: mx31lilly: fix build error for !CONFIG_USB_ULPI
arch/arm/mach-mx3/built-in.o: In function `mx31lilly_board_init':
mach-kzm_arm11_01.c:(.init.text+0x674): undefined reference to `otg_ulpi_create'
mach-kzm_arm11_01.c:(.init.text+0x68c): undefined reference to `otg_ulpi_create'
mach-kzm_arm11_01.c:(.init.text+0x744): undefined reference to `mxc_ulpi_access_ops'
make: *** [.tmp_vmlinux1] Error 1
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Peter Zijlstra [Thu, 1 Jul 2010 07:07:17 +0000 (09:07 +0200)]
sched: Cure nr_iowait_cpu() users
Commit
0224cf4c5e (sched: Intoduce get_cpu_iowait_time_us())
broke things by not making sure preemption was indeed disabled
by the callers of nr_iowait_cpu() which took the iowait value of
the current cpu.
This resulted in a heap of preempt warnings. Cure this by making
nr_iowait_cpu() take a cpu number and fix up the callers to pass
in the right number.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: linux-pm@lists.linux-foundation.org
LKML-Reference: <
1277968037.1868.120.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Alex Deucher [Wed, 30 Jun 2010 17:04:08 +0000 (13:04 -0400)]
drm/radeon/kms: remove rv100 bios connector quirk
Some RV100 cards with 2 VGA ports show up with DVI+VGA, however
some boards with DVI+VGA have the same subsystem ids. Better
to have a VGA port show up as DVI than having a non-useable
DVI port.
reported by DHR in irc.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Fri, 25 Jun 2010 20:21:27 +0000 (16:21 -0400)]
drm/radeon/kms/pm: fix power state indexing on igp chips in dynpm mode
Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=28745
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Tested-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Rafael J. Wysocki [Thu, 17 Jun 2010 23:02:27 +0000 (23:02 +0000)]
DRM / radeon / KMS: Fix hibernation regression related to radeon PM (was: Re: [Regression, post-2.6.34] Hibernation broken on machines with radeon/KMS and r300)
There is a regression from 2.6.34 related to the recent radeon power
management changes, caused by attempting to cancel a delayed work
item that's never been scheduled. However, the code as is has some
other issues potentially leading to visible problems.
First, the mutex around cancel_delayed_work() in radeon_pm_suspend()
doesn't really serve any purpose, because cancel_delayed_work() only
tries to delete the work's timer. Moreover, it doesn't prevent the
work handler from running, so the handler can do some wrong things if
it wins the race and in that case it will rearm itself to do some
more wrong things going forward. So, I think it's better to wait for
the handler to return in case it's already been queued up for
execution. Also, it should be prevented from rearming itself in that
case.
Second, in radeon_set_pm_method() the cancel_delayed_work() is not
sufficient to prevent the work handler from running and queing up
itself for the next run (the failure scenario is that
cancel_delayed_work() returns 0, so the handler is run, it waits on
the mutex and then rearms itself after the mutex has been released),
so again the work handler should be prevented from rearming itself in
that case..
Finally, there's a potential deadlock in radeon_pm_fini(), because
cancel_delayed_work_sync() is called under rdev->pm.mutex, but the
work handler tries to acquire the same mutex (if it wins the race).
Fix the issues described above.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Wed, 30 Jun 2010 16:02:03 +0000 (12:02 -0400)]
drm/radeon/kms/igp: fix possible divide by 0 in bandwidth code (v2)
Some IGP systems specify the system memory clock in the Firmware
table rather than the IGP info table. Check both and make sure
we have a value system memory clock value.
v2: make sure rs690_pm_info is called on rs780/rs880 as well.
fixes a regression since
07d4190327b02ab3aaad25a2d168f79d92e8f8c2.
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Wed, 30 Jun 2010 03:26:11 +0000 (13:26 +1000)]
drm/radeon: add quirk to make HP nx6125 laptop resume.
For some reason on resume, executing the BIOS scripts locks up the whole chipset, by avoiding the dynclk table the machine resumes properly and seems to function okay.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Tue, 29 Jun 2010 21:03:35 +0000 (17:03 -0400)]
drm/radeon/kms: add some missing regs to evergreen gpu init
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Wed, 23 Jun 2010 22:27:11 +0000 (18:27 -0400)]
drm/radeon/kms: fix typos in evergreen command checker
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Wed, 23 Jun 2010 01:58:26 +0000 (21:58 -0400)]
drm/radeon/kms: avoid oops on mac r4xx cards
They don't have an atombios so don't attempt to use it for
eng/mem clocks.
Reported by spoonb on #radeon
fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=28671
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Wed, 23 Jun 2010 01:35:41 +0000 (11:35 +1000)]
fb: fix colliding defines for fb flags.
When I added the flags I must have been using a 25 line terminal and missed the following flags.
The collided with flag has one user in staging despite being in-tree for 5 years.
I'm happy to push this via my drm tree unless someone really wants to do it.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Cc: stable@kernel.org
Jerome Glisse [Thu, 3 Jun 2010 17:34:48 +0000 (19:34 +0200)]
drm/radeon/kms: Force HDP_NONSURF to maximum size
HDP non surface should cover the whole VRAM but we were misscomputing
the size and we endup in some case not covering the VRAM at all (if
VRAM size were > 1G). Covering more than the VRAM size shouldn't be
an issue.
Fix : https://bugs.freedesktop.org/show_bug.cgi?id=28016
[airlied: add evergreen fix]
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Tue, 8 Jun 2010 23:44:36 +0000 (19:44 -0400)]
drm/radeon/kms: disable frac fb dividers for rs6xx
Should fix fdo bug 28331:
https://bugs.freedesktop.org/show_bug.cgi?id=28331
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Mon, 21 Jun 2010 03:31:38 +0000 (13:31 +1000)]
drm/radeon/kms: don't read attempt to read bios from VRAM on unposted GPU.
Since the VGA switcheroo, we'd attempt to read the BIOS from VRAM on startup
but on some unposted cards this can cause hangs/crashes.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=28592
(further problem pointed out by agd5f on IGP systems)
Reported-by: Reilithion on #radeon
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Wed, 16 Jun 2010 16:24:07 +0000 (12:24 -0400)]
drm/radeon/kms: fix typo in evergreen_gpu_init
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Matt Turner [Sat, 19 Jun 2010 18:13:45 +0000 (14:13 -0400)]
drm/radeon/kms: return ret in cursor_set failure path
We were returning 0 in both the success and failure paths. Noticed while
investigating FDO bug 26403.
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Jerome Glisse [Wed, 16 Jun 2010 08:45:22 +0000 (10:45 +0200)]
drm/ttm: non pooled page allocation should have GFP_USER set
Non pooled page allocation should have GFP_USER set so allocation
can wait and reclaim page from other process (ie non atomic).
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Roland Scheidegger [Sat, 12 Jun 2010 17:31:11 +0000 (13:31 -0400)]
drm/radeon/r100/r200: fix calculation of compressed cube maps
This needs similar handling to other compressed textures.
Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=26428
Signed-off-by: sroland@vmware.com
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Roland Scheidegger [Sat, 12 Jun 2010 17:31:10 +0000 (13:31 -0400)]
drm/radeon/r200: handle more hw tex coord types
Code did not handle projected 2d and depth coordinates, meaning potentially
set 3d or cube special handling might stick.
(Not sure what depth coord actually does, but I guess handling it
like a normal coordinate is the right thing to do.)
Might be related to https://bugs.freedesktop.org/show_bug.cgi?id=26428
Signed-off-by: sroland@vmware.com
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Roland Scheidegger [Sat, 12 Jun 2010 16:12:37 +0000 (12:12 -0400)]
drm/radeon/kms: CS checker texture fixes for r1xx/r2xx/r3xx
fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=28459
agd5f: apply to r1xx/r2xx as well.
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
Cc: stable@kernel.org
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Fri, 11 Jun 2010 05:09:05 +0000 (01:09 -0400)]
drm/radeon: add fake RN50 table for powerpc
This works well enough on a js21, but it would be nice if IBM could supply
more tables for the later Power6/7 machines.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Adam Jackson [Thu, 10 Jun 2010 17:33:26 +0000 (13:33 -0400)]
drm/fb: Fix video= mode computation
Reduced blanking is valid only when doing CVT modes. Also, generate GTF
modes unless CVT was requested; CVT devices are required to support GTF,
but the reverse is not true.
[airlied: fix typo]
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Thu, 10 Jun 2010 21:06:01 +0000 (17:06 -0400)]
drm/radeon/kms: fix DP after DPMS cycle
The transmitter needs to be enabled before the link is trained.
Reported-By: Lars Doelle <lars.doelle@on-line.de>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Cedric Godin [Fri, 11 Jun 2010 18:40:56 +0000 (14:40 -0400)]
drm/radeon/kms: fix dpms state on resume
When suspending, we turn the display hw off, at resume the screen will stay black.
This patch turn it on. Fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=16180
Signed-off-by: Cedric Godin <cedric.godin@skynet.be>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Sat, 12 Jun 2010 15:50:13 +0000 (11:50 -0400)]
drm/radeon/kms: fix bandwidth calculation when sideport is present
Fixes fdo bug 27529:
https://bugs.freedesktop.org/show_bug.cgi?id=27529
Reported-by: steckdenis@yahoo.fr
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Linus Torvalds [Wed, 30 Jun 2010 22:45:59 +0000 (15:45 -0700)]
Merge git://git./linux/kernel/git/gregkh/staging-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
Staging: rtl8192u_usb: Add LG device ID 043e:7a01
Staging: rtl8192s_usb: Remove duplicate device ID
Staging: rt2870: add device id for Zyxel NWD-270N
Staging: comedi: fix read past end of array in cb_pcidda_attach()
Staging: rtl8192su: add device ids
Staging: rtl8192su: remove device ids
Staging: rtl8187se: Fix compile warnings in 2.6.35-rc2
Staging: wlags49_h2: Fix build error when CONFIG_SYSFS is not set
Staging: wlags49_h2: add missing <linux/string.h> for strlen
Staging: hv: fix hv_utils module to properly autoload
staging: hv: Fix race condition on vmbus channel initialization
Staging: comedi: drivers: adl_pci9111: Fix AI commands in TRIG_FOLLOW case
Staging: mrst-touchscreen: fix dereferencing free memory
Staging: batman-adv: fix function prototype
Staging: batman-adv: return -EFAULT on copy_to_user errors
staging: usbip: usbip_common: kill rx thread on tx thread creation error.
Linus Torvalds [Wed, 30 Jun 2010 22:45:28 +0000 (15:45 -0700)]
Merge git://git./linux/kernel/git/gregkh/usb-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (22 commits)
USB: gadget: f_mass_storage: stale common->fsg value bug fix
USB: gadget: f_mass_storage: fixed fs descriptors not being updated
USB: musb: Enable the maximum supported burst mode for DMA
USB: musb: fix Blackfin ulpi stubs
USB: MUSB: make non-OMAP platforms build with CONFIG_PM=y
USB: musb_core: make disconnect and suspend interrupts work again
USB: obey the sysfs power/wakeup setting
USB: gadget eth: Fix calculate CRC32 in EEM
USB: qcserial: fix a memory leak in qcprobe error path
USB: gadget/printer, fix sleep inside atomic
USB: isp1362-hcd, fix double lock
USB: serial: ftdi: correct merge conflict with CONTEC id
USB: fix oops in usb_sg_init()
USB: s3c2410: deactivate endpoints before gadget unbinding
USB: ehci-mxc: bail out on transceiver problems
USB: otg/ulpi: bail out on read errors
usb: musb: Fix a bug by making suspend interrupt available in device mode
USB: r8a66597: Fix failure in change of status
USB: xHCI: Fix bug in link TRB activation change.
USB: gadget: g_fs: possible invalid pointer reference bug fixed
...
This page took 0.047642 seconds and 5 git commands to generate.