Benjamin Romer [Fri, 5 Dec 2014 22:09:17 +0000 (17:09 -0500)]
staging: unisys: fix CamelCase global variables in file.c
Fix CamelCase names:
Cdev => file_cdev
PControlVm_channel => file_controlvm_channel
MajorDev => majordev
Registered => registered
Signed-off-by: Ken Depro <kenneth.depro@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Fri, 5 Dec 2014 22:09:16 +0000 (17:09 -0500)]
staging: unisys: refactor visorchipset_file_init()
Fix the declaration so it is a single line. Fix CamelCase parameter
names:
MajorDev => major_dev
pControlVm_channel => controlvm_channel
Remove the unnecessary gotos and just return directly in error cases.
Fix the last error condition so it returns the result of cdev_add()
instead of always zero.
Signed-off-by: Ken Depro <kenneth.depro@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Fri, 5 Dec 2014 22:09:15 +0000 (17:09 -0500)]
staging: unisys: refactor req_handler_add()
Fix the CamelCase parameter names:
Server_Channel_Ok => server_channel_ok
Server_Channel_Init => server_channel_init
clientStr => clientstr
clientStrLen => clientstr_len
And remove the extra parenthesis in the list_add_tail() call at the end.
Signed-off-by: Ken Depro <kenneth.depro@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Fri, 5 Dec 2014 22:09:14 +0000 (17:09 -0500)]
staging: unisys: fix CamelCase globals in uisutils.c
Rename CamelCase global variable names:
ReqHandlerInfo_list => req_handler_info_list
ReqHandlerInfo_list_lock => req_handler_info_list_lock
Update all references to use the new name.
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Fri, 5 Dec 2014 22:09:13 +0000 (17:09 -0500)]
staging: unisys: refactor uisctrl_unregister_req_handler_ex()
Get rid of the unnecessary goto statement and just return directly.
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Fri, 5 Dec 2014 22:09:12 +0000 (17:09 -0500)]
staging: unisys: refactor uisctrl_register_req_handler_ex()
Fix CamelCase local variable name:
pReqHandlerInfo => req_handler
Get rid of the useless goto and just return straight away on an error.
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Fri, 5 Dec 2014 22:09:11 +0000 (17:09 -0500)]
staging: unisys: fix brackets in uisctrl_register_req_handler_ex()
Add the missing brackets to the last if statement in this function.
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Fri, 5 Dec 2014 22:09:10 +0000 (17:09 -0500)]
staging: unisys: fix spacing in uisutils.c
Fix as many spacing problems as possible by indenting lines properly and
getting rid of spaces between typecasts and their targets.
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Fri, 5 Dec 2014 22:09:09 +0000 (17:09 -0500)]
staging: unisys: fix line spacing in uisutils.c
Just remove the couple of extra blank lines.
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Fri, 5 Dec 2014 22:09:08 +0000 (17:09 -0500)]
staging: unisys: fix line spacing in uisthread.c
Just remove the one extra blank line.
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Fri, 5 Dec 2014 22:09:07 +0000 (17:09 -0500)]
staging: unisys: fix CamelCase names in do_locked_client_insert()
Fix CamelCase names:
pSignal => signal
Remove unused parameters issueInterruptIfEmpty and interruptHandle, and update
callers of this function.
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Fri, 5 Dec 2014 22:09:06 +0000 (17:09 -0500)]
staging: unisys: fix spacing in uisqueue.c
Correct alignment for a couple of functions and remove the space between
a typecast and its target.
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Fri, 5 Dec 2014 22:09:05 +0000 (17:09 -0500)]
staging: unisys: fix CamelCase Work queue name in uislib.c
Fix CamelCase name:
Work_wakeup_polling_device_channels => work_wakeup_polling_device_channels
Update references to use the new name.
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Fri, 5 Dec 2014 22:09:04 +0000 (17:09 -0500)]
staging: unisys: rename Initialize_incoming_thread()
Fix the CamelCase name of this function:
Initialize_incoming_thread => initialize_incoming_thread
Update all references to use the new name.
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Fri, 5 Dec 2014 22:09:03 +0000 (17:09 -0500)]
staging: unisys: rename Process_Incoming()
Fix the CamelCase function name:
Process_Incoming => process_incoming
Update all references to use the new name.
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Fri, 5 Dec 2014 22:09:02 +0000 (17:09 -0500)]
staging: unisys: refactor find_dev()
Fix the function definition so that it is a single line. Fix CamelCase
parameter names:
busNo => bus_no
devNo => dev_no
Get rid of the goto and just break out of the for loop, since that does
the exact same thing.
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Fri, 5 Dec 2014 22:09:01 +0000 (17:09 -0500)]
staging: unisys: refactor info_debugfs_read()
Fix the function declaration so the type is on the same line as the name,
and fix the CamelCase local variable name:
TotalBytes => total_bytes
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Fri, 5 Dec 2014 22:09:00 +0000 (17:09 -0500)]
staging: unisys: refactor delete_device_glue()
Fix the function declaration so it is a single line, and fix CamelCase
function parameter names:
busNo => bus_no
devNo => dev_no
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Fri, 5 Dec 2014 22:08:59 +0000 (17:08 -0500)]
staging: unisys: refactor delete_bus_glue()
Fix the function declaration to be a single line, and rename the CamelCase
parameter:
busNo => bus_no
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Fri, 5 Dec 2014 22:08:58 +0000 (17:08 -0500)]
staging: unisys: refactor destroy_device()
Fix the function declaration so it is a single line. Rename CamelCase local
variable names:
busNo => bus_no
devNo => dev_no
Fix use of uuid_le_cmp() to check for 0 instead of using !uuid_le_cmp(). Fix
spelling error DESTORY to correctly read DESTROY.
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Fri, 5 Dec 2014 22:08:57 +0000 (17:08 -0500)]
staging: unisys: refactor resume_device()
Fix the function declaration so it is a single line. Fix CamelCase local
variable names:
busNo => bus_no
devNo => dev_no
Fix use of uuid_le_cmp() to check for 0 instead of using !uuid_le_cmp().
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Fri, 5 Dec 2014 22:08:56 +0000 (17:08 -0500)]
staging: unisys: refactor pause_device()
Fix the function declaration so it is on a single line. Fix CamelCase local
variables:
busNo => bus_no
devNo => dev_no
Fix use of uuid_le_cmp() to check for 0 instead of using !uuid_le_cmp().
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Fri, 5 Dec 2014 22:08:55 +0000 (17:08 -0500)]
staging: unisys: refactor create_device()
OK, lets clean up this messy function. The entire thing is reflowed so spacing
and indentation is correct. Tests that created extra indentation were swapped
for equivalent negative tests that did not create extra indentation. Use of
cmp_uuid_le() were fixed to test specifically for the zero case, and not to
lazily use !cmp_uuid_le(). CamelCase local variable names were fixed:
busNo => bus_no
devNo => dev_no
minSize => min_size
pReqHandler => req_handler
Away => cleanup
Finally, the struct guest_msgs cmd declaration was moved to the beginning of
the function, and cringing and wincing at the function was significantly
reduced.
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Fri, 5 Dec 2014 22:08:54 +0000 (17:08 -0500)]
staging: unisys: fix CamelCase in destroy_bus()
Fix the CamelCase local variable:
busNo => bus_no
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Fri, 5 Dec 2014 22:08:53 +0000 (17:08 -0500)]
staging: unisys: fix CamelCase in create_bus()
Fix CamelCase local variable names:
busNo => bus_no
deviceCount => dev_count
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Fri, 5 Dec 2014 22:08:52 +0000 (17:08 -0500)]
staging: unisys: refactor init_vbus_channel()
Clean up the function definition so it's a single line. Remove the unnecessary
goto statements and just return directly. Remove the unneeded local variable
for the return result. Fix CamelCase parameters and local variable names:
channelAddr => ch_addr
channelBytes => ch_bytes
pChan => ch
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Fri, 5 Dec 2014 22:08:51 +0000 (17:08 -0500)]
staging: unisys: fix CamelCase global variable names in uislib.c
Fix CamelCase names:
ProcReadBufferValid => debug_buf_valid
ProcReadBuffer => debug_buf
BusListHead => bus_list
BusListLock => bus_list_lock
BusListCount => bus_list_count
MaxBusCount => max_bus_count
PhysicalDataChan => phys_data_chan
PlatformNumber => platform_no
Incoming_ThreadInfo => incoming_ti
Incoming_Thread_Started => incoming_started
List_Polling_Device_Channels => poll_dev_chan
Lock_Polling_Device_Channels => poll_dev_lock
Wakeup_Polling_Device_Channels => poll_dev_wake_q
Go_Polling_Device_Channels => poll_dev_start
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Fri, 5 Dec 2014 22:08:50 +0000 (17:08 -0500)]
staging: unisys: get rid of doubled assignment in uislib_mod_init()
Split the doubled assignment in uislib_mod_init() into two separate assignments.
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Fri, 5 Dec 2014 22:08:49 +0000 (17:08 -0500)]
staging: unisys: remove extra parens from uislib_enable_channel_interrupts()
Get rid of the extra parenthesis in uislib_enable_channel_interrupts().
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Fri, 5 Dec 2014 22:08:48 +0000 (17:08 -0500)]
staging: unisys: add missing brackets in Process_Incoming()
Fix the brackets in the else clause in Process_Incoming().
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Fri, 5 Dec 2014 22:08:47 +0000 (17:08 -0500)]
staging: unisys: add missing brackets in info_debugfs_read()
The if statement in info_debugfs_read() needs another set of brackets for the
else clause.
Signed-off-by: Ken Depro <kenneth.depro@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Fri, 5 Dec 2014 22:08:46 +0000 (17:08 -0500)]
staging: unisys: remove extraneous blank lines in uislib.c
Fix the line spacing errors in uislib.c.
Signed-off-by: Ken Depro <kenneth.depro@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Fri, 5 Dec 2014 22:08:45 +0000 (17:08 -0500)]
staging: unisys: fix strict checks in create_device()
Use the variable name rather than the type, and add a set of missing brackets
to the if statement in create_device().
Signed-off-by: Ken Depro <kenneth.depro@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Fri, 5 Dec 2014 22:08:44 +0000 (17:08 -0500)]
staging: unisys: refactor create_bus()
Fix the missing braces and logical continuation problems in create_bus().
Signed-off-by: Ken Depro <kenneth.depro@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Fri, 5 Dec 2014 22:08:43 +0000 (17:08 -0500)]
staging: unisys: fix alignment in uislib.c
Fix almost all of the parenthesis alignment problems in uislib.c. The 2
remaining issues are in create_device(), which is heavily indented and needs
to be refactored entirely anyway.
Signed-off-by: Ken Depro <kenneth.depro@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Fri, 5 Dec 2014 22:08:42 +0000 (17:08 -0500)]
staging: unisys: clean up typecasts in uislib.c
Remove all extraneous spaces from typecasts in uislib.c.
Signed-off-by: Ken Depro <kenneth.depro@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Fri, 5 Dec 2014 22:08:41 +0000 (17:08 -0500)]
staging: unisys: add comment to spinlock in struct charqueue
Add a comment to the charqueue's spinlock to explain that it is a lock for the
structure.
Signed-off-by: Ken Depro <kenneth.depro@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Fri, 5 Dec 2014 22:08:40 +0000 (17:08 -0500)]
staging: unisys: remove unused types from visorchipset.h
Delete the following unused types, and unused function prototypes:
VISORCHIPSET_SWITCH_INFO
VISORCHIPSET_EXTERNALPORT_INFO
VISORCHIPSET_INTERNALPORT_INFO
visorchipset_get_switch_info()
visorchipset_get_externalport_info()
Signed-off-by: Ken Depro <kenneth.depro@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Fri, 5 Dec 2014 22:08:39 +0000 (17:08 -0500)]
staging: unisys: get rid of channel stub
The functions in channels/* aren't used in a lot of places. In fact, the
functions in channel.c can be moved to uislib/uisqueue.c, and the rest
of the files in channels can be eliminated.
This patch deletes the channels directory and files, removes it from all
Kconfigs that referenced them, removes the reference in the Makefile,
and moves the functions inside of channels.c to uislib/uisqueue.c.
Signed-off-by: Ken Depro <kenneth.depro@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Fri, 5 Dec 2014 22:08:38 +0000 (17:08 -0500)]
staging: unisys: remove testing.h
Nobody is using this file so remove it and the reference to it in
visorchipset_main.c.
Signed-off-by: Ken Depro <kenneth.depro@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Fri, 5 Dec 2014 22:08:37 +0000 (17:08 -0500)]
staging: unisys: fix line spacing in globals.h
Get rid of the extra blank lines in globals.h.
Signed-off-by: Ken Depro <kenneth.depro@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Fri, 5 Dec 2014 22:08:36 +0000 (17:08 -0500)]
staging: unisys: fix line spacing in visorchipset_umode.h
Just get rid of the extra blank lines in this file.
Signed-off-by: Ken Depro <kenneth.depro@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 8 Jan 2015 00:19:33 +0000 (17:19 -0700)]
staging: comedi: aio_iiro_16: update the MODULE_DESCRIPTION
Update the MODULE_DESCRIPTION to something more useful than the generic
"Comedi low-level driver".
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 8 Jan 2015 00:19:32 +0000 (17:19 -0700)]
staging: comedi: aio_iiro_16: add command support for change of state detection
This board supports interrupts on change of state of the digital inputs.
Add the necessary subdevice support and interrupt handler to allow async
commands to detect the change of state.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 8 Jan 2015 00:19:31 +0000 (17:19 -0700)]
staging: comedi: aio_iiro_16: introduce aio_iiro_enable_irq()
This board supports interrupts on change of state of the digital inputs.
Introduce a helper function to enable/disable the interrupt. Use the new
helper function to ensure that interrupts are initially disabled during
the driver (*attach).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 8 Jan 2015 00:19:30 +0000 (17:19 -0700)]
staging: comedi: aio_iiro_16: read intial state of the digital outputs
The relay registers are readable. Read them during the attach to get
the initial state of the digital outputs.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 8 Jan 2015 00:19:29 +0000 (17:19 -0700)]
staging: comedi: aio_iiro_16: tidy up multi-line comments
Tidy up the multi-line comments to follow the kernel CodingStyle.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 8 Jan 2015 00:19:28 +0000 (17:19 -0700)]
staging: comedi: aio_iiro_16: tidy up subdevice init
For aesthetics, add some white space to the subdevice initialization.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 8 Jan 2015 00:19:27 +0000 (17:19 -0700)]
staging: comedi: aio_iiro_16: fix subdevice 1 'type'
Subdevice 1 is a digial input not a digital I/O subdevice.
Fix the type and, for aesthetics, rename the (*insn_bits) function used
to read the inputs.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 8 Jan 2015 00:19:26 +0000 (17:19 -0700)]
staging: comedi: aio_iiro_16: fix subdevice 0 'type'
Subdevice 0 is a digial output not a digital I/O subdevice.
Fix the type and, for aesthetics, rename the (*insn_bits) function used
to set the outputs.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:55:13 +0000 (17:55 +0000)]
staging: comedi: vm80xx: rewrite comedi driver comment block
Rewrite the comedi "driver" comment block to conform to the usual format
for comedi driver comment blocks and reformat it to use the usual block
comment style. In particular, the "Devices:" line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Note that the comedi board names I've added to the "Devices:" line don't
quite match the board names reported by the driver itself, as they
contain parentheses and I don't want nested parentheses on the
"Devices:" line (mostly because it confuses a script I use to extract
supported devices from the driver comments).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:55:12 +0000 (17:55 +0000)]
staging: comedi: usbduxsigma: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Also change "USB-DUX" to "USB-DUX-SIGMA" to distinguish it from the
other USB-DUX models.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:55:11 +0000 (17:55 +0000)]
staging: comedi: usbduxfast: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Also change "USB-DUX" to "USB-DUX-FAST" to distinguish it from the other
USB-DUX models.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:55:10 +0000 (17:55 +0000)]
staging: comedi: usbdux: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:55:09 +0000 (17:55 +0000)]
staging: comedi: rti802: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:55:08 +0000 (17:55 +0000)]
staging: comedi: rti800: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:55:07 +0000 (17:55 +0000)]
staging: comedi: rtd520: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:55:06 +0000 (17:55 +0000)]
staging: comedi: pcmuio: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:55:05 +0000 (17:55 +0000)]
staging: comedi: pcmmio: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:55:04 +0000 (17:55 +0000)]
staging: comedi: pcmda12: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:55:03 +0000 (17:55 +0000)]
staging: comedi: pcmad: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:55:02 +0000 (17:55 +0000)]
staging: comedi: pcl730: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Group boards from the same manufacturer together on the "Devices:" line
to avoid repeating the "[Manufacturer]" tag unnecessarily.
Also fix a couple of typos in the board names on the "Devices:" line:
"p16r16dio" was used twice, but one of them should be "p8r8dio";
"prearl-mm-p" should be "pearl-mm-p".
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:55:01 +0000 (17:55 +0000)]
staging: comedi: pcl726: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:55:00 +0000 (17:55 +0000)]
staging: comedi: pcl724: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:59 +0000 (17:54 +0000)]
staging: comedi: pcl711: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:58 +0000 (17:54 +0000)]
staging: comedi: ni_tiocmd: change comedi "driver" comment to "module"
This module contains support code for some other comedi drivers, but
isn't a comedi driver itself, so doesn't need a comedi "driver" comment.
To preserve the details in the original comment, change it into a comedi
"module" comment (which I've just invented) by changing the "Driver:"
line into a "Module:" line and removing the "Devices:" line.
Also reformat it to use the usual block comment style.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:57 +0000 (17:54 +0000)]
staging: comedi: ni_tio: change comedi "driver" comment to "module"
This module contains support code for some other comedi drivers, but
isn't a comedi driver itself, so doesn't need a comedi "driver" comment.
To preserve the details in the original comment, change it into a comedi
"module" comment (which I've just invented) by changing the "Driver:"
line into a "Module:" line and removing the "Devices:" line.
Also reformat it to use the usual block comment style.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:56 +0000 (17:54 +0000)]
staging: comedi: ni_labpc_pci: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:55 +0000 (17:54 +0000)]
staging: comedi: ni_labpc: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:54 +0000 (17:54 +0000)]
staging: comedi: ni_at_ao: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:53 +0000 (17:54 +0000)]
staging: comedi: ni_65xx: use board names on "Devices:" line
All the supported devices listed on the "Devices:" line currently use
the comedi driver name as the comedi board name. Historically, this
documented the name that should be passed to the "comedi_config" program
to "attach" the device via the COMEDI_DEVCONFIG ioctl. Some drivers
expected the driver name and others expected the board name. Since this
driver no longer supports the legacy "attach" mechanism, change the
"Devices:" list to show the board names, as that is probably more
useful.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:52 +0000 (17:54 +0000)]
staging: comedi: ni_65xx: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:51 +0000 (17:54 +0000)]
staging: comedi: ni_6527: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:50 +0000 (17:54 +0000)]
staging: comedi: mf6x4: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:49 +0000 (17:54 +0000)]
staging: comedi: me_daq: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:48 +0000 (17:54 +0000)]
staging: comedi: ke_counter: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:47 +0000 (17:54 +0000)]
staging: comedi: ii_pci20kc: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:46 +0000 (17:54 +0000)]
staging: comedi: dyna_pci10xx: rewrite comedi driver comment block
Rewrite the comedi "driver" comment block to conform to the usual format
for comedi driver comment blocks and reformat it to use the usual block
comment style. In particular, the "Devices:" line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Change the original "Devices:" line to a "Description:" line.
Remove the "Version:" line as we don't care about driver version numbers
in the kernel.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:45 +0000 (17:54 +0000)]
staging: comedi: dt282x: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:44 +0000 (17:54 +0000)]
staging: comedi: dmm32at: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:43 +0000 (17:54 +0000)]
staging: comedi: das6402: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:42 +0000 (17:54 +0000)]
staging: comedi: das16: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:41 +0000 (17:54 +0000)]
staging: comedi: das08_pci: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:40 +0000 (17:54 +0000)]
staging: comedi: das08_isa: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:39 +0000 (17:54 +0000)]
staging: comedi: das08: remove comedi driver comment block
This is a module containing common code for the "das08_cs", "das08_isa"
and "das08_pci" comedi drivers. It does not need its own comedi
"driver" comment block, so remove it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:38 +0000 (17:54 +0000)]
staging: comedi: dac02: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:37 +0000 (17:54 +0000)]
staging: comedi: comedi_parport: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:36 +0000 (17:54 +0000)]
staging: comedi: cb_pcidda: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:35 +0000 (17:54 +0000)]
staging: comedi: c6xdigio: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:34 +0000 (17:54 +0000)]
staging: comedi: adv_pci1724: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:33 +0000 (17:54 +0000)]
staging: comedi: adv_pci1723: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:32 +0000 (17:54 +0000)]
staging: comedi: adl_pci8164: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:31 +0000 (17:54 +0000)]
staging: comedi: adl_pci7x3x: rewrite comedi driver comment block
Rewrite the comedi "driver" comment block to conform to the usual format
for comedi driver comment blocks and reformat it to use the usual block
comment style. In particular, the "Devices:" line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
The original comment indicated the number of input and output channels
in each item on the "Devices:" line. Move this information into a
separate paragraph moved from a block comment found elsewhere in the
driver.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:30 +0000 (17:54 +0000)]
staging: comedi: adl_pci6208: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:29 +0000 (17:54 +0000)]
staging: comedi: 8255_pci: rewrite comedi driver comment block
Rewrite the comedi "driver" comment block to conform to the usual format
for comedi driver comment blocks and reformat it to use the usual block
comment style. In particular, the "Devices:" line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
The original comment indicated the number of DIO channels in each item
on the "Devices:" line. Move this information into separate paragraphs.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Decotigny [Thu, 25 Dec 2014 20:28:28 +0000 (12:28 -0800)]
staging: comedi: dmm32at: fix style issues
Before:
1 ERROR: code indent should use tabs where possible
1 WARNING: please, no spaces at the start of a line
After:
(none)
Signed-off-by: David Decotigny <ddecotig@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Frederic Jacob [Thu, 18 Dec 2014 05:15:07 +0000 (00:15 -0500)]
Staging: comedi: fix blank line coding style in comedi_bond.c
This is a patch to the comedi_bond.c file that fixes up a blank line after
declaration warning found by the checkpatch.pl tool
Signed-off-by: Frederic Jacob <frederic.jacob.78@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drumber-1 [Wed, 3 Dec 2014 13:33:57 +0000 (13:33 +0000)]
Staging: comedi: fix spacing coding style issue in s626.c
This is a patch to the s626.c file that fixes a spacing error found by the checkpatch.pl tool
Signed-off-by: Jacob L Close <drumber01@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 3 Dec 2014 18:25:42 +0000 (11:25 -0700)]
staging: comedi: addi_apci_1500: handle shared interrupt
The interrupt used by this driver is shared. If the board did not cause
the interrupt the driver should return IRQ_NONE so that another driver
can handle it. Fix the interrupt handler so this happens.
Tidy up the interrupt handler a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 3 Dec 2014 18:25:41 +0000 (11:25 -0700)]
staging: comedi: addi_apci_1500: remove APCI1500_ADDRESS_RANGE
This define is not used by the driver. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This page took 0.047639 seconds and 5 git commands to generate.