Fred Fish [Fri, 11 Aug 1995 16:39:14 +0000 (16:39 +0000)]
* defs.h (strchr, strrchr, strstr, strtok, strerror): Enclose in
#ifndefs to protect against previous definitions as macros.
* HOW_TO_RELEASE: Continue updating...
Ken Raeburn [Fri, 11 Aug 1995 01:11:30 +0000 (01:11 +0000)]
* read.c (s_mri_sect) [BFD_ASSEMBLER]: Fix typos in choosing and setting
section flags.
Ken Raeburn [Thu, 10 Aug 1995 21:42:57 +0000 (21:42 +0000)]
put version number into doc from makefile
Ian Lance Taylor [Thu, 10 Aug 1995 21:18:21 +0000 (21:18 +0000)]
* doc/as.texinfo: Add documentation for MRI compatibility mode.
* doc/as.1: Likewise.
Ian Lance Taylor [Thu, 10 Aug 1995 20:12:11 +0000 (20:12 +0000)]
* coffgrok.c (do_type): Handle array dimensions the same way gdb
does.
Ian Lance Taylor [Thu, 10 Aug 1995 19:58:56 +0000 (19:58 +0000)]
* coffswap.h (coff_swap_aux_in): Swap the array dimensions
whenever x_fcnary is not being used for something else, rather
than only for an array.
(coff_swap_aux_out): Likewise.
PR 7373.
Ian Lance Taylor [Thu, 10 Aug 1995 16:43:00 +0000 (16:43 +0000)]
* config/tc-m68k.c (m68k_ip): When recognizing '#', use isbyte and
iword rather than expr8 and expr16. When recognizing 'M', use
issbyte rather than expr8. When recognizing 'Q' and 't', just
check for O_constant rather than using expr8.
* config/m68k-parse.h (expr8, expr16): Don't define.
* Makefile.in (m68k-parse.o): Depend upon m68k-parse.h, not
m68k-parse.y.
Ian Lance Taylor [Thu, 10 Aug 1995 16:19:34 +0000 (16:19 +0000)]
* read.c (potable): Add spc, ttl, xcom, xref.
(s_mri_sect): New function.
* read.h (s_mri_sect): Declare.
* config/obj-coff.c (obj_coff_section) (both versions): In MRI
mode, call s_mri_sect.
(obj_pseudo_table): Add sect.s and section.s. Move sect outside
of ifndef BFD_ASSEMBLER.
* config/obj-elf.c (elf_pseudo_table): Add section.s, sect,
sect.s.
(obj_elf_section): In MRI mode, call s_mri_sect.
* config/tc-m68k.c (md_pseudo_table): Add restore, save.
(struct save_opts): Define.
(save_stack): New static variable.
(s_save, s_restore): New static functions.
Ian Lance Taylor [Thu, 10 Aug 1995 04:47:20 +0000 (04:47 +0000)]
* gas/mri/char.d: Fix for little endian machines.
* gas/mri/float.d: Likewise.
Ian Lance Taylor [Thu, 10 Aug 1995 04:44:59 +0000 (04:44 +0000)]
* read.c (s_set): Remove unused local ptr.
(hex_float): Check target_big_endian.
(equals): Remove unused local p.
* config/tc-a29k.h (TARGET_BYTES_BIG_ENDIAN): Define.
* config/tc-h8500.h (TARGET_BYTES_BIG_ENDIAN): Define.
* config/tc-hppa.h (TARGET_BYTES_BIG_ENDIAN): Define.
* config/tc-i860.h (TARGET_BYTES_BIG_ENDIAN): Define.
* config/tc-m68k.h (TARGET_BYTES_BIG_ENDIAN): Define.
* config/tc-m88k.h (TARGET_BYTES_BIG_ENDIAN): Define.
* config/tc-tahoe.h (TARGET_BYTES_BIG_ENDIAN): Define.
* config/tc-sh.c (little): Set target_big_endian.
(md_begin): Likewise.
(md_parse_option): Likewise.
(build_relax): Check target_big_endian rather than shl.
(build_Mytes, md_atof): Likewise.
(md_convert_frag, md_apply_fix): Likewise.
(md_number_to_chars): Likewise.
Ian Lance Taylor [Wed, 9 Aug 1995 23:22:13 +0000 (23:22 +0000)]
* config/tc-m68k.c (m68k_abspcadd): New static variable.
(m68k_quick): New static variable.
(m68k_rel32): New static variable.
(md_pseudo_table): Add opt and reg.
(m68k_ip): Permit absolute symbols in 'l'/'L' recognition. Check
m68k_quick in 'M' and 'Q' recognition. Check m68k_abspcadd in
DISP handling. Check m68k_rel32 in BASE/POST/PRE handling.
(md_begin): In MRI mode, initialize m68k_abspcadd and m68k_rel32.
In MRI mode, change unsized branch aliases to be variable sized.
(struct opt_action): Define.
(opt_table): Define.
(s_opt): New static function.
(skip_to_comma): New static function.
(opt_chip): New static function.
(opt_list): New static function.
(opt_list_symbols): New static function.
(s_reg): New static function.
* as.h (flag_keep_locals): Change from unsigned char to int.
(flag_no_warnings): Likewise.
Ian Lance Taylor [Wed, 9 Aug 1995 23:16:06 +0000 (23:16 +0000)]
* read.c (mri_line_label): Make non-static.
(potable): Add nopage, page, plen.
(s_org): Error if in MRI mode.
* read.h (mri_line_label): Declare.
* listing.c (listing_nopage): New function.
* listing.h (listing_nopage): Declare.
Ian Lance Taylor [Wed, 9 Aug 1995 23:13:30 +0000 (23:13 +0000)]
* symbols.c (symbol_begin): Set sy_frag of abs_symbol to
&zero_address_frag.
Kung Hsu [Wed, 9 Aug 1995 21:56:37 +0000 (21:56 +0000)]
* xcoffread.x (xcoff_symfile_offset): Revert an unwanted change gets
in accidentally from Aug 1 checkin.
Steve Chamberlain [Wed, 9 Aug 1995 20:41:16 +0000 (20:41 +0000)]
* remote-hms.c (hms_cmds): Get reg term right.
* monitor.c (monitor_fetch_register): If we see
a non-hex digit, just stop reading.
* remote.c (remote_wait): Change way $O is handled.
Ian Lance Taylor [Wed, 9 Aug 1995 19:38:01 +0000 (19:38 +0000)]
* gas/all/struct.s, gas/all/struct.d: New test.
* gas/all/gas.exp: Run it.
Ian Lance Taylor [Wed, 9 Aug 1995 19:36:25 +0000 (19:36 +0000)]
* read.c (abs_section_offset): New global variable.
(potable): Add offset, struct.
(do_org): New static function; handle changing the origin in the
absolute section.
(s_org): Use do_org.
(s_set): Likewise.
(equals): Likewise.
(s_space): In absolute_section, just increase abs_section_offset.
(s_struct): New function.
(emit_expr): Handle absolute_section specially.
* read.h (abs_section_offset): Declare.
(s_struct): Declare.
* read.c (potable): Add ifeq, ifge, ifgt, ifle, iflt, ifne.
Change if to pass O_ne to s_if.
(read_a_source_file): Don't define an label without a colon if
ignore_input returns true.
* read.c (potable): Add dcb, dcb.b, dcb.d, dcb.l, dcb.s, dcb.w,
dcb.x, ds.d, ds.p, ds.s, ds.x, elsec, endc, fail, format, llen,
noformat.
(read_a_source_file): If pseudo-op handler is s_end, quit
immediately.
(s_end): New function.
(s_fail): New function.
(s_float_space): New function.
(hex_float): New static function.
(float_cons): Use hex_float.
* read.h (s_fail): Declare.
(s_float_space): Declare.
Ian Lance Taylor [Wed, 9 Aug 1995 19:34:00 +0000 (19:34 +0000)]
* write.c (adjust_reloc_syms): Check that symbol is not NULL
before checking sy_mri_common.
(fixup_segment): Likewise.
* config/obj-coff.c (fixup_segment): Likewise.
Ian Lance Taylor [Wed, 9 Aug 1995 19:33:17 +0000 (19:33 +0000)]
* frags.c (frag_more): Warn if in absolute_section.
(frag_now_fix): In absolute_section, return abs_section_offset.
* subsegs.c (subseg_change): If switching to absolute_section,
just set now_seg and now_subseg.
(subseg_set_rest): Special handling when switching to or from
absolute_section.
Ian Lance Taylor [Wed, 9 Aug 1995 19:32:49 +0000 (19:32 +0000)]
* config/tc-m68k.c (m68k_float_copnum): New static variable.
(md_pseudo_table): Add fopt and mask2.
(m68k_ip): Use m68k_float_copnum, not COPNUM, when setting
coprocessor register to use. In case 'I' when checking operands,
correct coprocessor register numbers. In case 'I' when setting
operands, don't add 1.
(s_fopt): New static function.
* config/m68k-parse.h (COPNUM): Don't define.
Ian Lance Taylor [Wed, 9 Aug 1995 19:32:03 +0000 (19:32 +0000)]
* listing.c (listing_psize): Treat argument as indicating whether
a height is expected.
Jeff Law [Wed, 9 Aug 1995 18:59:48 +0000 (18:59 +0000)]
Fix typo in changelog entry.
Jeff Law [Wed, 9 Aug 1995 18:53:41 +0000 (18:53 +0000)]
* configure.in (powerpc-*-aix*): Recognize as a new gdb host
and target.
(powerpc-*-eabi*): Don't set configdirs.
(powerpcle-*-eabi*0: Likewise.
* configure: Updated.
* rs6000-nat.c (vmap_ldinfo): Don't relocate data addresses
for the main objfile if DONT_RELOCATE_SYMFILE_OBJFILE is
defined.
* config/powerpc/{aix.mh,aix.mh}: Host and target makefile fragments
for powerpc running aix4.
* config/powerpc/{nm-aix.h, tm-ppc-aix.h, xm-aix.h}: Native, target
and host include files for powerpc running aix4.
More of Mike's powerpc work + minor changes.
Ian Lance Taylor [Wed, 9 Aug 1995 15:44:05 +0000 (15:44 +0000)]
Add ChangeLog entry for accidental checkin of read.c.
Stan Shebs [Wed, 9 Aug 1995 15:16:33 +0000 (15:16 +0000)]
* top.c (target_output_hook): Really make it match defs.h (char *
is not the same as unsigned char *).
Ian Lance Taylor [Wed, 9 Aug 1995 14:53:21 +0000 (14:53 +0000)]
* configure.in: Move random special target handling before
possible break.
* configure: Rebuild.
Ian Lance Taylor [Wed, 9 Aug 1995 03:46:15 +0000 (03:46 +0000)]
Tue Aug 8 23:41:25 1995 Alan Modra <alan@spri.levels.unisa.edu.au>
* configure.in: Consistently use ${target_cpu_type} rather than
${cpu_type} after the loop.
* configure: Rebuild.
* Makefile.in (targ-cpu.o): Use @target_cpu_type@ rather than
@cpu_type@.
Ken Raeburn [Wed, 9 Aug 1995 01:44:02 +0000 (01:44 +0000)]
* expr.h (operatorT): Remove comma after last enumerator value.
Ken Raeburn [Wed, 9 Aug 1995 01:39:47 +0000 (01:39 +0000)]
yet more vms work from pat rankin
Ken Raeburn [Wed, 9 Aug 1995 01:16:09 +0000 (01:16 +0000)]
* as.h (alloca): If __STDC__, declare void* instead of char*.
Steve Chamberlain [Wed, 9 Aug 1995 00:12:18 +0000 (00:12 +0000)]
* dlltool.c (mtable): New fields.
(ASM_RVA_BEFORE, ASM_RVA_AFTER): New.
(flush_page, gen_lib_file): Use new macros.
Steve Chamberlain [Tue, 8 Aug 1995 23:54:27 +0000 (23:54 +0000)]
Tue Aug 8 16:34:57 1995 steve chamberlain <sac@slash.cygnus.com>
* cofflink.c (_bfd_coff_generic_relocate_section): Remove most
of special case stuff for PE. Now handled by relocs.
* coff-i386.c (coff_i386_reloc): Special case of PE type 7s.
(howto_table): Type 7 is dir32-rva.
Ken Raeburn [Tue, 8 Aug 1995 23:31:28 +0000 (23:31 +0000)]
* emultempl/sunos.em (gld${EMULATION_NAME}_find_so): Use xmalloc instead of
alloca.
J.T. Conklin [Tue, 8 Aug 1995 22:25:36 +0000 (22:25 +0000)]
* Makefile.in (CC_FOR_TARGET, CXX_FOR_TARGET): Don't use
$r/../gcc/xgcc unless it is present.
J.T. Conklin [Tue, 8 Aug 1995 22:15:20 +0000 (22:15 +0000)]
* Makefile.in (CXX_FOR_TARGET): Don't use ${rootme}/../gcc/xgcc
unless it is present.
Ian Lance Taylor [Tue, 8 Aug 1995 21:49:12 +0000 (21:49 +0000)]
* binutils-all/objcopy.exp: Add setup_xfail for a29k-*-vxworks*
for simple copy test.
Ian Lance Taylor [Tue, 8 Aug 1995 21:46:37 +0000 (21:46 +0000)]
* config/tc-m68k.c (archs): Add
68ec000, 68hc000, 68hc001,
68ec020,
68ec030,
68ec040, and 68330.
(md_pseudo_table): Add chip and comline.
(m68k_init_after_args): Use strcasecmp when comparing default_cpu
against architectures.
(mri_chip, s_chip): New static functions.
Ian Lance Taylor [Tue, 8 Aug 1995 21:41:52 +0000 (21:41 +0000)]
* gas/mri/common.s, gas/mri/common.d: New test.
* gas/mri/mri.exp: Run it.
Ian Lance Taylor [Tue, 8 Aug 1995 21:41:30 +0000 (21:41 +0000)]
* struc-symbol.h (struct symbol): Add sy_mri_common bit.
* read.h (mri_comon_symbol): Declare.
(s_mri_common): Declare.
* read.c (mri_line_label): New static variable.
(mri_common_symbol): New global variable.
(potable): Add "common" and "common.s".
(read_a_source_file): In MRI mode, set mri_line_label for a label
at the start of a line.
(s_mri_common): New function.
(s_space): Handle mri_common_symbol.
* symbols.c (colon): Change return value from void to symbolS *,
and return new symbol. If mri_common_symbol is set, attach the
new symbol to it.
(resolve_symbol_value): Handle an sy_mri_common symbol.
* symbols.h (colon): Change return value in declaration.
* subsegs.c (subseg_set_rest): Clear mri_common_symbol.
(subseg_set (both versions)): Likewise.
* frags.c (frag_more): Warn if mri_common_symbol is not NULL.
* write.c (adjust_reloc_syms): Skip sy_mri_common symbols.
(write_object_file): Discard sy_mri_common symbols.
(fixup_segment): Change relocations against sy_mri_common symbols
to be against the common symbol itself.
* config/obj-coff.c (yank_symbols): Discard sy_mri_common symbols.
(fixup_segment): Change relocations against sy_mri_common symbols
to be against the common symbol itself.
* config/obj-aout.c (obj_crawl_symbol_chain): Discard
sy_mri_common symbols.
Jeff Law [Tue, 8 Aug 1995 18:01:46 +0000 (18:01 +0000)]
* top.c (target_output_hook): Make declaration match the one
in defs.h.
Jeff Law [Tue, 8 Aug 1995 17:53:58 +0000 (17:53 +0000)]
* symfile.c (add_psymbol_to_list): Initialize SYMBOL_SECTION.
(add_psymbol_addr_to_list): Likewise.
* symfile.h (ADD_PSYMBOL_VT_TO_LIST): Likewise.
Jeff Law [Tue, 8 Aug 1995 17:31:52 +0000 (17:31 +0000)]
* configure.host: Recognize aix4 explicitly.
* rs6000-core.c (CORE_DATA_SIZE_FIELD): New macro to get a the size
of a core dump's data section. Provide alternate definition for aix4.
(SAVE_FIELD): Similarly for save state field (register info).
(STACK_END_ADDR): Provide definition suitable for aix4.
* config/{aix4.mh,aix4.mt}: New configuration files.
* hosts/aix4.h: Likewise.
Mike's aix4 changes, slightly modified.
Ian Lance Taylor [Tue, 8 Aug 1995 17:12:22 +0000 (17:12 +0000)]
* doc/c-m68k.texi: Add documentation for CPU specific options, and
for Motorola syntax.
Ian Lance Taylor [Tue, 8 Aug 1995 17:09:10 +0000 (17:09 +0000)]
* config/m68k-parse.y (motorola_operand): For (%pc), set mode to
DISP, not BASE.
Ken Raeburn [Tue, 8 Aug 1995 06:54:30 +0000 (06:54 +0000)]
* write.c (relax_align): Add extra padding for linkrelax only if
LINKER_RELAXING_SHRINKS_ONLY is defined.
* config/tc-i960.h (LINKER_RELAXING_SHRINKS_ONLY): Define it.
* doc/internals.texi (Relaxation): Write up some stuff on linker relaxing and
LINKER_RELAXING_SHRINKS_ONLY.
Ian Lance Taylor [Tue, 8 Aug 1995 03:48:22 +0000 (03:48 +0000)]
* gas/mri/mri.exp: Add setup_xfail for a29k*-*-* for constants
test.
Ian Lance Taylor [Tue, 8 Aug 1995 03:38:59 +0000 (03:38 +0000)]
* gasp/crash1.out, gasp/macro.out, gasp/sfunc.out: Complete
truncated files, so that the tests pass.
Ian Lance Taylor [Tue, 8 Aug 1995 03:35:44 +0000 (03:35 +0000)]
Move testsuite ChangeLog entries to testsuite/ChangeLog.
Ian Lance Taylor [Tue, 8 Aug 1995 03:22:47 +0000 (03:22 +0000)]
* gas/mri/mri.exp: Add setup_xfail for hppa*-*-* for equ,
constants, and expr.
Ian Lance Taylor [Tue, 8 Aug 1995 03:17:41 +0000 (03:17 +0000)]
* gas/m68k/all.exp: Run schwab test on hpux*, not just hpux. Run
on vxworks*, not just vxworks5.1.
Ian Lance Taylor [Tue, 8 Aug 1995 03:05:16 +0000 (03:05 +0000)]
* som.c (som_bfd_copy_private_symbol_data): Cast initializations
to avoid warnings.
Ian Lance Taylor [Tue, 8 Aug 1995 02:56:44 +0000 (02:56 +0000)]
* lib/gas-defs.exp (fail_phase, pass_phase): Remove.
(run_dump_test): Just call pass or fail.
Ian Lance Taylor [Tue, 8 Aug 1995 02:43:30 +0000 (02:43 +0000)]
* gas/m68k/operands.s, gas/m68k/operands.d: New test.
* gas/m68k/op68000.d: New test.
* gas/m68k/cas.s, gas/m68k/cas.d: New test.
* gas/m68k/bitfield.s, gas/m68k/bitfield.d: New test.
* gas/m68k/schwab.d: Run objdump with -j .text. Adjust for
changes to disassembler.
* gas/m68k/all.exp: Run new tests. Run schwab test for
m68k-*-coff*.
Ian Lance Taylor [Tue, 8 Aug 1995 02:36:10 +0000 (02:36 +0000)]
* config/m68k-parse.y: New file: bison grammar for m68k operands,
including support for Motorola syntax.
* config/m68k-parse.h: New file; definitions shared between
m68k-parse.y and tc-m68k.c.
* config/tc-m68k.c: Include m68k-parse.h.
(enum operand_type): Move to m68k-parse.h, where it is named
m68k_operand_type. Rename all uses. Rearrange somewhat. Add
FPREG. Rename AOFF to DISP. Rename AINDX to BASE. Rename APODX
to POST. Rename APRDX to PRE. Remove AMIND. Rename MSCR to
CONTROL. Remove DINDR.
(struct m68k_exp): Move to m68k-parse.h. Remove e_beg, e_end and
e_seg fields. Rename e_exp to exp. Rename e_siz to size, and
change type to enum m68k_size. Change all uses.
(enum _register): Move to m68k-parse.h, where it is named
m68k_register. Rename all uses. Add ZDATA0-7 and ZADDR0-7.
(struct m68k_op): Move to m68k-parse.h. Change all fields.
(seg): Don't define.
(add_exp): Remove.
(FAIL, OK): Remove.
(m68k_reg_parse): Move to m68k-parse.y, and rewrite.
(SKIP_WHITE, SKIP_W): Remove.
(try_moto_index, try_index): Remove.
(m68k_ip_op): Move to m68k-parse.y, and rewrite to use grammar.
(main): Remove obsolete test function.
(m68k_ip): Extensive changes to use new grammar.
(get_regs): Remove.
(crack_operand): m68k_ip_op now returns 0 on success.
(init_table): Add ssp, zd0-7 and za0-7.
(md_assemble): Make er const. Correct loop over operands when
looking for error message.
(md_begin): Set alt_notend_table for '(' and '@'.
(get_num): Expression is already parsed. Don't set seg.
* configure.in: If cpu_type is m68k, put m68k-parse.o in
extra-objects.
* configure: Rebuild.
* Makefile.in (DISTSTUFF): Add m68k-parse.c.
(BISON): Use ../bison/bison if it exists.
(BISONFLAGS): Define as empty.
(TARG_CPU_DEP_m68k): Depend upon $(srcdir)/config/m68k-parse.h.
(m68k-parse.c, m68k-parse.o): New targets.
Steve Chamberlain [Mon, 7 Aug 1995 22:42:19 +0000 (22:42 +0000)]
* top.c (target_output_hook): New definition.
Steve Chamberlain [Mon, 7 Aug 1995 22:39:00 +0000 (22:39 +0000)]
* stack.c (gdb_string.h): Include after defs.h
* defs.h (target_output_hook): New declaration.
* source.c (mod_path): Fix Win32 \ handling.
Jeff Law [Mon, 7 Aug 1995 20:53:29 +0000 (20:53 +0000)]
* som.c (som_decode_symclass): Handle absolute symbols by checking
the SOM type (since they will rarely if ever be in the absolute
section).
Something Ian noticed.
Ian Lance Taylor [Mon, 7 Aug 1995 20:22:13 +0000 (20:22 +0000)]
* m68k-dis.c: (fpcr_names): Add % before all register names.
(reg_names): Likewise.
(print_insn_arg): Don't explicitly print % before register names.
Add % before register names in static array names. In case 'r',
print data registers as `@(Dn)', not `Dn@'. When printing a
memory address, don't print @# before it.
(print_indexed): Change base_disp and outer_disp from int to
bfd_vma. Print using MIT syntax, not mutant invalid Motorola
syntax. Sign extend 8 byte displacement correctly.
(print_base): Print using MIT syntax. Print zpc when appropriate.
Change parameter disp from int to bfd_vma.
David Edelsohn [Mon, 7 Aug 1995 16:24:42 +0000 (16:24 +0000)]
* configure.in (i386-go32 host): Fix typo (deja-gnu -> dejagnu).
(i386-win32 host): Likewise. Don't build readline.
Jeff Law [Mon, 7 Aug 1995 09:04:27 +0000 (09:04 +0000)]
* gas/sh/*: New tests for the hitachi-sh.
Sanitized away for now...
Jeff Law [Mon, 7 Aug 1995 08:58:12 +0000 (08:58 +0000)]
* config/tc-sh.c (parse_reg): Handle new FP registers.
(get_specific): Handle new operand types.
Sanitized away for now.
Jeff Law [Mon, 7 Aug 1995 08:48:22 +0000 (08:48 +0000)]
* gdb.disasm/sh3.s: Source for sh3 disassembler tests.
* gdb.disasm/sh3.exp: Run the sh3 disassembler tests.
* gdb.disasm/configure.in (sh-*-*): Use sh3.mt makefile fragment.
* gdb.disasm/sh3.mt: Makefile fragment for sh3 ests.
sh3e disassembler tests. Sanitized out for now.
Jeff Law [Mon, 7 Aug 1995 08:39:42 +0000 (08:39 +0000)]
* sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
* sh-opc.h (sh_arg_type): Add new operand types.
(sh_table): Add new opcodes from SH3E Floating Point ISA.
sh3e stuff. Sanitized out for now.
Fred Fish [Mon, 7 Aug 1995 07:20:02 +0000 (07:20 +0000)]
* gdb.base/corefile.exp: Change xfail for backtrace in
corefile.exp from linuxaout to all linux.
* gdb.base/sigall.exp (test_one_sig): Specifically deal with
cases where we miss the breakpoint at the signal handler
for some reason. Setup xfail for linuxoldld/linuxaout and
getting SIGIO. Setup xfail for linuxoldld/linuxaout for
hitting SIGURG breakpoint.
* gdb.base/signals.exp: Setup xfail for "next" acting like
continue to add linuxoldld. Setup xfail for all linux for
"next to handler in signals_tests_1", "backtrace in
signals_tests_1", "continue to func1", "pass SIGUSR1",
and continue to handler".
Jeff Law [Mon, 7 Aug 1995 04:17:24 +0000 (04:17 +0000)]
* hppa-tdep.c (frame_saved_pc): Don't try to dig a return pointer
out of a long branch stub.
hpux10 _start is incorrectly marked as a long-branch stub.
Fred Fish [Sun, 6 Aug 1995 19:18:27 +0000 (19:18 +0000)]
* Makefile.in (GDBTK_SUPPORT_DIRS): Define and pass as part of
SUPPORT_FILES to submakes.
Fred Fish [Sun, 6 Aug 1995 19:16:15 +0000 (19:16 +0000)]
Remove traces of gdbtk from Makefile.in if --lose-gdbtk arg seen.
Jeff Law [Sat, 5 Aug 1995 06:18:31 +0000 (06:18 +0000)]
* objcopy.c (mark_symbols_used_in_relocations): Handle sections
with no relocations.
* coffgrok.c (do_sections_p1): Likewise.
Fix for net bug.
Jeff Law [Sat, 5 Aug 1995 06:07:33 +0000 (06:07 +0000)]
* som (som_get_reloc_upper_bound): Return -1 on error. Compute
return value with sizeof (arelent *), not sizeof (arelent).
Net bug and something I noticed while fixing it.
Fred Fish [Sat, 5 Aug 1995 01:13:26 +0000 (01:13 +0000)]
* ch-exp.y (write_lower_upper_value): Add prototype so bison
generated parser will insert prototype before first func usage.
Bison and byacc order the output sections differently. Also
make function static.
Fred Fish [Sat, 5 Aug 1995 01:04:06 +0000 (01:04 +0000)]
* Makefile.in (GDB_SUPPORT_DIRS): Add utils.
(DEVO_SUPPORT): Add mpw-README, mpw-build.in, mpw-config.h and
mpw-configure.
Jeff Law [Fri, 4 Aug 1995 20:40:44 +0000 (20:40 +0000)]
* xcoffread.c (process_linenos): Fix typo in last change.
Stan Shebs [Fri, 4 Aug 1995 00:47:13 +0000 (00:47 +0000)]
Lose EST-only files (now part of generic m68k monitor config)
Fred Fish [Thu, 3 Aug 1995 18:42:27 +0000 (18:42 +0000)]
Document FSF address updating of all files with FSF addresses,
except for the COPYING* files.
Fred Fish [Thu, 3 Aug 1995 17:07:55 +0000 (17:07 +0000)]
Remove Sanitize reference.
Fred Fish [Thu, 3 Aug 1995 17:07:16 +0000 (17:07 +0000)]
Add ChangeLog, pr-5984.ch, pr-5984.exp.
Fred Fish [Thu, 3 Aug 1995 17:06:45 +0000 (17:06 +0000)]
Add hppro.exp, monitor.exp.
Fred Fish [Thu, 3 Aug 1995 16:56:36 +0000 (16:56 +0000)]
Remove keep-chill stuff from .Sanitize and add gdb.chill to things to
keep. Remove sanitize references in ChangeLog. Remove start/end
sanitize-chill lines in Makefile.in.
Fred Fish [Thu, 3 Aug 1995 16:48:48 +0000 (16:48 +0000)]
Add configure to r16_files and arc_files in .Sanitize
Remove references to .Sanitize in ChangeLogs, start updating
always sanitized away file HOW_TO_RELEASE.
Fred Fish [Thu, 3 Aug 1995 16:45:21 +0000 (16:45 +0000)]
Remove reference to config/.Sanitize
Fred Fish [Thu, 3 Aug 1995 16:44:20 +0000 (16:44 +0000)]
Remove tcl and tk from static list of things to keep. They are dynamically
added to either the keep or loose list depending upon the presence of the
-lose-gdbtk option.
Peter Schauer [Thu, 3 Aug 1995 09:17:51 +0000 (09:17 +0000)]
* config/alpha/tm-alpha.h (EXTRA_FRAME_INFO): Add pc_reg field.
(SKIP_TRAMPOLINE_CODE): Define.
* alpha-tdep.c (alpha_frame_saved_pc): Use pc_reg field from
frame to find the saved pc register.
(alpha_saved_pc_after_call): Skip over shared library trampoline
before trying to find the saved pc register.
(find_proc_desc): Copy PROC_PC_REG from found proc_desc
to heuristic proc_desc.
(init_extra_frame_info): Initialize pc_reg field in frame.
Stan Shebs [Thu, 3 Aug 1995 01:07:32 +0000 (01:07 +0000)]
* configure.in (m68*-est-*): Use monitor target config.
* configure: Update.
* config/m68k/est.mt, config/m68k/tm-est.h: Delete.
* config/m68k/monitor.mt, config/m68k/tm-monitor.h: Fix comments.
Ian Lance Taylor [Wed, 2 Aug 1995 22:48:21 +0000 (22:48 +0000)]
* m68kmri.h: Remove.
Ian Lance Taylor [Wed, 2 Aug 1995 22:42:21 +0000 (22:42 +0000)]
* config/tc-m68k.c: Remove BREAK_UP_BIG_DECL stuff.
(struct m68k_incant): Change m_operands field to be const.
(struct m68k_it): Change args field to be const.
(m68k_ip): Change local variable s to be const.
(opcode_ptr): Remove.
(md_begin): Use m68k_numopcodes, not numopcodes. Use
m68k_opcodes, not removed opcode_ptr. Use m68k_numaliases, not
numaliases.
Ian Lance Taylor [Wed, 2 Aug 1995 22:38:58 +0000 (22:38 +0000)]
* m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
Clean up tables.
* m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
(opcode): Remove.
(print_insn_m68k): Change d to be const. Use m68k_numopcodes
rather than numopcodes. Use m68k_opcodes rather than removed
opcode function. Don't check F_ALIAS.
(print_insn_arg): Change first parameter to be const char *.
* Makefile.in (ALL_MACHINES): Add m68k-opc.o.
(m68k-opc.o): New target.
* configure.in: Build m68k-opc.o for bfd_m68k_arch.
* configure: Rebuild.
Ian Lance Taylor [Wed, 2 Aug 1995 22:37:40 +0000 (22:37 +0000)]
* m68k.h: Move tables into opcodes/m68k-opc.c, leaving just the
declarations. Remove F_ALIAS and flag field of struct
m68k_opcode. Change arch field of struct m68k_opcode to unsigned
int. Make name and args fields of struct m68k_opcode const.
David Edelsohn [Wed, 2 Aug 1995 22:35:22 +0000 (22:35 +0000)]
Rewritten so table is only sorted/hashed once, even if switching
between sparc32/sparc64 in one executable.
Ken Raeburn [Wed, 2 Aug 1995 20:39:02 +0000 (20:39 +0000)]
* configure.in (appdirs): Use =, not ==, in test expression when trying to
build the text to print in the warning message for Solaris users.
David Edelsohn [Wed, 2 Aug 1995 17:15:07 +0000 (17:15 +0000)]
(build_hash_table): Fix memory leak.
(print_insn_sparc, print_insn_sparc64): Clean up comments regarding
switching between sparc32 and sparc64.
David Edelsohn [Wed, 2 Aug 1995 16:48:02 +0000 (16:48 +0000)]
(build_hash_table): Allocate all entries at once.
David Edelsohn [Wed, 2 Aug 1995 16:06:17 +0000 (16:06 +0000)]
* sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
(opcode_bits, opcode_hash_table, sparc64_p): New variables.
(opcodes_initialized): Renamed from opcodes_sorted.
(build_hash_table): New function.
(is_delayed_branch): Use hash table.
(print_insn): Renamed from print_insn_sparc, made static.
Build and use hash table.
(print_insn_sparc, print_insn_sparc64): New functions.
(compare_opcodes): If !sparc64, move sparc64 opcodes to end,
and vice-versa if sparc64.
* sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
David Edelsohn [Wed, 2 Aug 1995 15:18:52 +0000 (15:18 +0000)]
* sparc.h (F_NOTV9): Define.
Fred Fish [Wed, 2 Aug 1995 05:55:49 +0000 (05:55 +0000)]
* Makefile.in (VERSION): Bump to 4.14.2
Fred Fish [Wed, 2 Aug 1995 03:41:12 +0000 (03:41 +0000)]
Update FSF address.
Kung Hsu [Tue, 1 Aug 1995 23:09:20 +0000 (23:09 +0000)]
* xcoffread.c (process_linenos): The value in include file symbol
should point to line number table. Currently this value is not
set correctly by AIX ld. A fix to get around this bug.
Ian Lance Taylor [Tue, 1 Aug 1995 22:10:10 +0000 (22:10 +0000)]
* gas/mri/*: New tests for MRI mode.
Ian Lance Taylor [Tue, 1 Aug 1995 22:02:07 +0000 (22:02 +0000)]
* config/tc-m68k.c (init_table): Add "control", "status", "iaddr",
"sfcr", and "dfcr" as synonyms for existing entries.
(md_begin): In MRI mode, force flag_reg_prefix_optional to 1.
(md_parse_option): Removed unused locals i and arch. Change type
of arch (another one) to unsigned long.
(tc_coff_sizemachdep): Add return after abort to avoid warning.
Ian Lance Taylor [Tue, 1 Aug 1995 22:01:01 +0000 (22:01 +0000)]
Initial support for MRI style labels and expressions.
* as.h (flag_mri): Declare/define.
* as.c (show_usage): Mention -M and its synonym --mri.
(parse_args): Add 'M' to std_shortopts. Add "mri" to
std_longopts. Set flag_mri if -M is seen.
(main): Call parse_args before input_scrub_begin. Call
expr_begin.
* app.c (do_scrub_begin): Don't set lex for '"' or '\'' in MRI
mode. Do set lex for ';', '*', and '!' in MRI mode.
(do_scrub_next_char): Remove MRI ifdef in LEX_IS_WHITESPACE case.
In MRI mode, keep spaces between labels and colons. Remove MRI
ifndef around LEX_IS_ONECHAR_QUOTE case. In MRI mode, don't use
'!' or '*' as comment characters even if they are in
comment_chars.
* read.h (lex_type): No longer const.
* read.c: Include libiberty.h.
(lex_type): No longer const.
(read_begin): In MRI mode, set lex_type of '?' to 3.
(potable): Add dc, dc.b, dc.d, dc.l, dc.s, dc.w, dc.x, ds, ds.b,
ds.l, ds.w, and xdef.
(read_a_source_file): Change LABELS_WITHOUT_COLON ifdef to check
for MRI mode at runtime rather than compile time. Handle the EQU
pseudo-op in MRI mode. Remove bogus MRI ifdef around done_pseudo.
Change NO_PSEUDO_DOT ifdef to also take effect for MRI mode at
runtime.
(cons): In MRI mode, always call parse_mri_cons rather than
TC_PARSE_CONS_EXPRESSION.
(parse_mri_cons): Always compile, not just when MRI is defined.
Call TC_PARSE_CONS_EXPRESSION, not expression, when the input is
not a string constant. Handle A and E modifiers.
(float_cons): Accept :xxxx, where the x's are hex digits.
* expr.h (operatorT): Add O_eq, O_ne, O_lt, O_le, O_ge, O_gt.
(expr_begin): Declare.
* expr.c (integer_constant): In MRI mode, if the base was not
specified, look for a suffix on the number to set the base.
(mri_char_constant): New static function.
(operand): Remove MRI ifdef. In MRI mode, do various things: Pass
0 as the base when calling integer_constant if there was no
prefix. Check for a hex constant suffix if when a leading '0' is
seen. Don't accept 0x or 0b as a prefix. Check for E'chars' and
A'chars'. Handle MRI character constants. Treat '"' as the
unary bitwise not operator. Treat $ as the program counter, or as
the prefix for a hex constant. Treat % as the prefix for a binary
constant and @ as the prefix for an octal constant. Treat : as
the prefix for a hex constant.
(op_encoding): Set '"' to O_bit_not, '<' to O_lt, and '>' to O_gt.
(op_rank): No longer const. Change rank values.
(expr_begin): New function.
(operator): New static function.
(expr): Use operator. Don't bother to mention the operator in
warnings. Remove bogus #if 0 code. Handle new operatorT values.
* atof-generic.c (atof_generic): In MRI mode, accept underscores
around the exponent in floating point numbers.
* symbols.h (symbols_case_sensitive): Declare.
* symbols.c (symbols_case_sensitive): New global variable.
(symbol_create): Check symbols_case_sensitive.
(symbol_find_base): Likewise.
(resolve_symbol_value): Handle new operatorT values.
(print_expr_1): Likewise.
(S_IS_LOCAL): In MRI mode, names beginning with two '?' characters
are local.
J.T. Conklin [Tue, 1 Aug 1995 20:14:27 +0000 (20:14 +0000)]
* configure.in: Check for working mmap, ansi headers, string.h,
strings.h, and memory.h.
* configure: Regenerated.
* gdb_stat.h: New file, "portable" <sys/stat.h>.
* gdb_string.h: New file, "portable" <string.h>.
* altos-xdep.c, arm-tdep.c, arm-xdep.c, convex-tdep.c,
convex-xdep.c, coredep.c, cxux-nat.c, dbxread.c, exec.c,
gould-xdep.c, hppa-tdep.c, i386aix-nat.c, i386b-nat.c,
i386mach-nat.c, i386v-nat.c, infptrace.c, m88k-nat.c, main.c,
mdebugread.c, objfiles.c, os9kread.c, procfs.c, pyr-xdep.c,
rs6000-nat.c, source.c, standalone.c, stuff.c, sun386-nat.c,
symfile.c, symm-nat.c, symm-tdep.c, symtab.c, top.c, ultra3-nat.c,
ultra3-xdep.c, umax-xdep.c, xcoffread.c: Include "gdb_stat.h"
instead of <sys/stat.h>.
* alpha-tdep.c, breakpoint.c, buildsym.c, c-typeprint.c,
ch-typeprint.c, coffread.c, command.c, core-sol2.c, core-svr4.c,
core.c, corelow.c, cp-valprint.c, dbxread.c, dcache.c, demangle.c,
dpx2-nat.c, dstread.c, dwarfread.c, elfread.c, environ.c, eval.c,
exec.c, f-lang.c, f-typeprint.c, f-valprint.c, findvar.c,
fork-child.c, gdbtypes.c, hpread.c, i386-tdep.c, infcmd.c,
inflow.c, infptrace.c, infrun.c, irix5-nat.c, language.c,
m2-typeprint.c, main.c, mdebugread.c, minsyms.c, mipsread.c,
monitor.c, nlmread.c, objfiles.c, os9kread.c, osfsolib.c, parse.c,
printcmd.c, procfs.c, regex.c, remote-adapt.c, remote-arc.c,
remote-array.c, remote-bug.c, remote-e7000.c, remote-eb.c,
remote-es.c, remote-hms.c, remote-mm.c, remote-os9k.c,
remote-pa.c, remote-sim.c, remote-st.c, remote-udi.c,
remote-utils.c, remote-vx.c, remote-vx29k.c, remote-vx68.c,
remote-vx960.c, remote-vxmips.c, remote-vxsparc.c, remote.c,
solib.c, somread.c, source.c, stabsread.c, stack.c, symfile.c,
symmisc.c, symtab.c, target.c, top.c, typeprint.c, utils.c,
valarith.c, valops.c, valprint.c, values.c, xcoffread.c: Include
"gdb_string.h" instead of <string.h>.
* gdbtk.c: Likewise.
* config/xm-sysv4.h, i386/xm-ptx.h, m68k/xm-sun3os4.h,
sparc/xm-sun4os4.h (HAVE_MMAP): Removed.
* config/xm-lynx.h, config/i386/xm-ptx.h,
config/m68k/nm-apollo68b.h, config/m68k/xm-hp300hpux.h,
config/mips/xm-irix3.h, config/mips/xm-mips.h,
config/mips/xm-news-mips.h, config/mips/xm-riscos.h,
config/pa/hppah.h, config/rs6000/xm-rs6000.h,
config/sparc/xm-sun4os4.h, config/sparc/xm-sun4sol2.h,
config/vax/xm-vaxbsd.h, config/vax/xm-vaxult.h,
config/vax/xm-vaxult2.h (MEM_FNS_DECLARED): Removed.
* config/mips/xm-irix3.h, config/mips/xm-mips.h,
config/pa/xm-hppah.h (memcpy, memset): Removed declarations.
This page took 0.041163 seconds and 4 git commands to generate.