K. Richard Pixley [Thu, 23 May 1991 22:21:19 +0000 (22:21 +0000)]
added bfd, binutils, ld, gdb, gcc.
K. Richard Pixley [Thu, 23 May 1991 22:06:18 +0000 (22:06 +0000)]
First cut.
K. Richard Pixley [Thu, 23 May 1991 22:05:24 +0000 (22:05 +0000)]
Initial revision
K. Richard Pixley [Thu, 23 May 1991 21:57:03 +0000 (21:57 +0000)]
First cut.
K. Richard Pixley [Thu, 23 May 1991 21:49:14 +0000 (21:49 +0000)]
Initial revision
K. Richard Pixley [Thu, 23 May 1991 21:15:10 +0000 (21:15 +0000)]
Added bfd.
K. Richard Pixley [Thu, 23 May 1991 21:14:00 +0000 (21:14 +0000)]
Initial revision
K. Richard Pixley [Thu, 23 May 1991 17:44:08 +0000 (17:44 +0000)]
Initial revision
K. Richard Pixley [Thu, 23 May 1991 17:32:34 +0000 (17:32 +0000)]
Initial revision
K. Richard Pixley [Thu, 23 May 1991 17:18:12 +0000 (17:18 +0000)]
Initial revision
K. Richard Pixley [Thu, 23 May 1991 17:14:50 +0000 (17:14 +0000)]
Add sanitize trigger lines.
K. Richard Pixley [Thu, 23 May 1991 17:11:51 +0000 (17:11 +0000)]
No tc-sparc.c here.
K. Richard Pixley [Thu, 23 May 1991 17:10:40 +0000 (17:10 +0000)]
Initial revision
K. Richard Pixley [Thu, 23 May 1991 03:49:53 +0000 (03:49 +0000)]
Macro'd everything, tightened masks.
K. Richard Pixley [Thu, 23 May 1991 03:49:10 +0000 (03:49 +0000)]
new sparc-opcode, new pinsn.
Roland Pesch [Thu, 23 May 1991 01:22:06 +0000 (01:22 +0000)]
* Makefile.dist, doc/gdb.texinfo, doc/*-m4.texinfo: split up GDB
docn into separate sections---basically chapters, plus two loose
pieces that can be configured to go in different places. This
allows GNU m4 to preprocess the manual without coredumping.
* Makefile.dist: tell TeX where to find texinfo.
Roland Pesch [Thu, 23 May 1991 00:35:54 +0000 (00:35 +0000)]
Move definition of \manvers back into gdb.texinfo (had been captured
in gdb.top-m4 when files were split), for continuity in version
numbering: the version of the manual is the version of the layout file.
(By R. Pesch fiat).
Roland Pesch [Thu, 23 May 1991 00:14:26 +0000 (00:14 +0000)]
*** empty log message ***
Steve Chamberlain [Wed, 22 May 1991 15:04:00 +0000 (15:04 +0000)]
Not only compiles, but spells _do_getl64 right too
Steve Chamberlain [Wed, 22 May 1991 14:59:10 +0000 (14:59 +0000)]
* libbfd.c: Now compiles
* coffcode.h: removed all put_x_<sizes>
Steve Chamberlain [Wed, 22 May 1991 14:27:39 +0000 (14:27 +0000)]
*** empty log message ***
Steve Chamberlain [Wed, 22 May 1991 14:26:59 +0000 (14:26 +0000)]
Changed #ifdef __GNUC__ to #ifdef HOST_64_BIT
Added DEFUNS
K. Richard Pixley [Wed, 22 May 1991 01:44:06 +0000 (01:44 +0000)]
remove gdb until config issues resolve.
K. Richard Pixley [Wed, 22 May 1991 01:40:35 +0000 (01:40 +0000)]
Oops.
K. Richard Pixley [Wed, 22 May 1991 01:30:56 +0000 (01:30 +0000)]
Added stage stuff.
K. Richard Pixley [Wed, 22 May 1991 01:18:42 +0000 (01:18 +0000)]
v9 stuff.
Steve Chamberlain [Tue, 21 May 1991 20:19:08 +0000 (20:19 +0000)]
Removed #define obstack_alloc xmalloc pending correct solution
Steve Chamberlain [Tue, 21 May 1991 20:18:12 +0000 (20:18 +0000)]
Fixed multiple definition of put_16 and get_16
K. Richard Pixley [Tue, 21 May 1991 19:55:06 +0000 (19:55 +0000)]
Initial revision
Steve Chamberlain [Tue, 21 May 1991 16:05:19 +0000 (16:05 +0000)]
Removed the V9 comment
Steve Chamberlain [Tue, 21 May 1991 16:04:48 +0000 (16:04 +0000)]
Removed bfd_h_get_x
Steve Chamberlain [Tue, 21 May 1991 15:59:33 +0000 (15:59 +0000)]
Changed obstack_chunk_alloc to xmalloc
Steve Chamberlain [Tue, 21 May 1991 15:57:42 +0000 (15:57 +0000)]
*** empty log message ***
John Gilmore [Tue, 21 May 1991 03:08:37 +0000 (03:08 +0000)]
Add target_defaulted to bfd struct. Fix formatting in various places.
Fix some obsolete comments. Remove macros for obsolete bfd_symbol_value,
bfd_symbol_name, bfd_get_first_symbol, bfd_get_next_symbol,
bfd_classify_symbol, bfd_symbol_hasclass.
Steve Chamberlain [Tue, 21 May 1991 00:14:16 +0000 (00:14 +0000)]
*** empty log message ***
Steve Chamberlain [Mon, 20 May 1991 23:15:15 +0000 (23:15 +0000)]
Mon May 20 16:14:07 1991 Steve Chamberlain (steve at cygint.cygnus.com)
* Changed some types to work with 64 bit object files
Roland Pesch [Mon, 20 May 1991 19:19:41 +0000 (19:19 +0000)]
* Makefile.dist, doc/gdb.texinfo: respectively create, and use,
the new target "rdl-apps.texinfo" which captures the Makefile
variable that records where to find the Readline libraries.
Roland Pesch [Mon, 20 May 1991 19:17:48 +0000 (19:17 +0000)]
*** empty log message ***
John Gilmore [Mon, 20 May 1991 01:37:08 +0000 (01:37 +0000)]
The one that shipped with 3.5.
John Gilmore [Mon, 20 May 1991 01:25:36 +0000 (01:25 +0000)]
Final versions used to make gdb-3.95 release.
John Gilmore [Mon, 20 May 1991 00:15:48 +0000 (00:15 +0000)]
More prep for final 3.95 release.
John Gilmore [Mon, 20 May 1991 00:08:39 +0000 (00:08 +0000)]
Fix nits found in attempting a Tahoe port.
John Gilmore [Sun, 19 May 1991 22:34:40 +0000 (22:34 +0000)]
Initial revision
John Gilmore [Sun, 19 May 1991 22:30:22 +0000 (22:30 +0000)]
Add Vax-BSD and Tahoe-BSD support.
John Gilmore [Sun, 19 May 1991 17:18:55 +0000 (17:18 +0000)]
Update for release 3.95. Readline is independent. Add assorted
files that were missed since the last release.
John Gilmore [Sun, 19 May 1991 17:13:32 +0000 (17:13 +0000)]
Update comment; these are for SVR3.2, not SVR2.
John Gilmore [Sun, 19 May 1991 17:11:52 +0000 (17:11 +0000)]
Add tahoe and i386sco targets; update comments in i386v32 targets.
John Gilmore [Sun, 19 May 1991 17:11:51 +0000 (17:11 +0000)]
Initial revision
John Gilmore [Sun, 19 May 1991 16:09:01 +0000 (16:09 +0000)]
Add rev #
John Gilmore [Sun, 19 May 1991 16:01:39 +0000 (16:01 +0000)]
update for release
John Gilmore [Sun, 19 May 1991 15:26:27 +0000 (15:26 +0000)]
Initial revision
John Gilmore [Sun, 19 May 1991 15:21:15 +0000 (15:21 +0000)]
* config.gdb: Don't create readline dir in subdir builds.
* main.c: Include with "..." form for non-system include files,
so "gcc -MM" for "make depend" works.
Include readline files with "...h" rather than <readline/...h>.
John Gilmore [Sun, 19 May 1991 15:08:57 +0000 (15:08 +0000)]
Update from Rich's damage and try for a releasable directory.
Minor Bothner changes.
John Gilmore [Sun, 19 May 1991 14:58:25 +0000 (14:58 +0000)]
Check in one built with "config.gdb none" rather than "config.gdb sparc".
Also includes a few changes around readline dependencies.
John Gilmore [Sun, 19 May 1991 14:57:22 +0000 (14:57 +0000)]
* Makefile.dist: Fix Rich damage; undo "configure" changes in
favor of keeping the (working) config.gdb. Move readline
library up a notch.
John Gilmore [Sun, 19 May 1991 14:52:42 +0000 (14:52 +0000)]
Update for readline split.
John Gilmore [Sun, 19 May 1991 12:51:09 +0000 (12:51 +0000)]
Undo rich's "avoid compiling the module that doesn't compile, so I
can claim that it configures and builds" change.
John Gilmore [Sun, 19 May 1991 12:49:37 +0000 (12:49 +0000)]
* sparc-xdep.c (deferred_stores): Repair minor damage by Rich.
Move deferred_stores to top of file, but don't separate its
#define's from its variable. Add commentary.
K. Richard Pixley [Sun, 19 May 1991 08:44:48 +0000 (08:44 +0000)]
Config polish.
K. Richard Pixley [Sun, 19 May 1991 08:05:16 +0000 (08:05 +0000)]
Merged in gdb changes.
K. Richard Pixley [Sun, 19 May 1991 08:00:57 +0000 (08:00 +0000)]
Updated to relect a gdb change in sparc-opcode.h.
K. Richard Pixley [Sun, 19 May 1991 08:00:11 +0000 (08:00 +0000)]
Added gdb.
K. Richard Pixley [Sun, 19 May 1991 07:27:02 +0000 (07:27 +0000)]
configure changes and -opcode.h movement.
K. Richard Pixley [Sun, 19 May 1991 00:36:45 +0000 (00:36 +0000)]
Added gdb.
K. Richard Pixley [Sun, 19 May 1991 00:32:13 +0000 (00:32 +0000)]
Changes to deal with missing subdirs gracefully, and changes dictated
from dropping configure over gdb.
K. Richard Pixley [Sun, 19 May 1991 00:19:54 +0000 (00:19 +0000)]
Initial revision
K. Richard Pixley [Sun, 19 May 1991 00:16:46 +0000 (00:16 +0000)]
Configure for gdb.
Steve Chamberlain [Sat, 18 May 1991 03:08:59 +0000 (03:08 +0000)]
*** empty log message ***
Steve Chamberlain [Sat, 18 May 1991 02:58:02 +0000 (02:58 +0000)]
Initial revision
Steve Chamberlain [Sat, 18 May 1991 02:57:45 +0000 (02:57 +0000)]
*** empty log message ***
K. Richard Pixley [Sat, 18 May 1991 02:44:28 +0000 (02:44 +0000)]
Gas buys into ../include. Files merged.
K. Richard Pixley [Sat, 18 May 1991 02:15:32 +0000 (02:15 +0000)]
Buying into ../include and ../libiberty.
K. Richard Pixley [Sat, 18 May 1991 01:01:09 +0000 (01:01 +0000)]
mkdep is not a standard tool nor do we support or install it.
Assuming it's existence kills config, make, and install.
K. Richard Pixley [Sat, 18 May 1991 00:53:02 +0000 (00:53 +0000)]
Using gcc here screws config and debugging something awful.
Roland Pesch [Fri, 17 May 1991 23:19:08 +0000 (23:19 +0000)]
*** empty log message ***
Roland Pesch [Fri, 17 May 1991 23:17:56 +0000 (23:17 +0000)]
Added readline/inc-readline.texinfo and readline/inc-history.texinfo
to the list of dependencies for the target "gdb.dvi".
Roland Pesch [Fri, 17 May 1991 22:53:05 +0000 (22:53 +0000)]
*** empty log message ***
Roland Pesch [Fri, 17 May 1991 22:52:47 +0000 (22:52 +0000)]
* readline/inc-history.texinfo, readline/inc-readline.texinfo:
applied various small fixes due to or inspired by RMS comments
Roland Pesch [Fri, 17 May 1991 21:43:25 +0000 (21:43 +0000)]
*** empty log message ***
Roland Pesch [Fri, 17 May 1991 21:43:01 +0000 (21:43 +0000)]
* doc/gdb.texinfo: finished using all RMS comments, save those for
appendices on readline and cmd history (which are in other source
files)
John Gilmore [Fri, 17 May 1991 19:49:37 +0000 (19:49 +0000)]
Bothner
Roland Pesch [Fri, 17 May 1991 01:14:04 +0000 (01:14 +0000)]
*** empty log message ***
Roland Pesch [Fri, 17 May 1991 01:10:52 +0000 (01:10 +0000)]
* doc/gdb.texinfo: (1) Updated w/ref to RMS comments through
chapter 9; (2) documented 'break' command's menu mode for
overloaded names, in response to hgs problem report C++ p-31
Roland Pesch [Thu, 16 May 1991 04:09:54 +0000 (04:09 +0000)]
*** empty log message ***
Roland Pesch [Thu, 16 May 1991 04:09:30 +0000 (04:09 +0000)]
Divert specialized startup
instructions to "Targets" chapter for generic manuals, while
leaving them up front for manuals specific to specialized
environments; apply fixes from RMS comments through chapter 4.
Roland Pesch [Thu, 16 May 1991 02:20:20 +0000 (02:20 +0000)]
*** empty log message ***
Roland Pesch [Thu, 16 May 1991 02:16:27 +0000 (02:16 +0000)]
(1) new Appendix, Renamed Commands;
(2) new leading subsection, Contributors to GDB
Roland Pesch [Thu, 16 May 1991 00:46:44 +0000 (00:46 +0000)]
*** empty log message ***
Roland Pesch [Thu, 16 May 1991 00:46:09 +0000 (00:46 +0000)]
* gdb.texinfo: (1) better introductory example; (2) more
consistent use of @code, @samp, @file, @kbd throughout; small
cleanups to first three nodes.
Roland Pesch [Wed, 15 May 1991 18:11:10 +0000 (18:11 +0000)]
*** empty log message ***
Roland Pesch [Wed, 15 May 1991 18:10:40 +0000 (18:10 +0000)]
Wed May 15 11:02:48 1991 Roland H. Pesch (pesch at fowanton.cygnus.com)
* pretex.m4: modify explanatory text slightly (and redefine
"regexp") to keep GNU m4 from complaining. (It still crashes
later, but one step at a time...)
John Gilmore [Wed, 15 May 1991 17:36:32 +0000 (17:36 +0000)]
readline update
John Gilmore [Wed, 15 May 1991 17:30:02 +0000 (17:30 +0000)]
Fix duplicated entry in ChangeLog.
Roland Pesch [Tue, 14 May 1991 23:34:41 +0000 (23:34 +0000)]
* Makefile.dist: put gdb.dvi stuff (updated to use M4 preprocessor
stuff for config manual) here where it counts; updated
to use new subdir structure (gdb/doc/).
* Makefile: generated from above via
config.gdb none
before checkin
Roland Pesch [Tue, 14 May 1991 22:34:12 +0000 (22:34 +0000)]
(1) removed "gdb.info*" files (just introduced) from CVS;
(2) instead,
* gdbint.texinfo: added instructions on generating gdb.info* files
locally for release.
Roland Pesch [Tue, 14 May 1991 22:07:52 +0000 (22:07 +0000)]
* gdb.info*: added to distribution. These are ordinary info
files, formatted from gdb.texinfo (via gdb-all.texinfo, see
Makefile)---but due to use of texinfo 2, can't count on makeinfo
to generate these, so we distribute them already formatted.
* gdb.texinfo: included full Info node and menu crud (as generated
by C-u M-x texinfo-master-menu using the texinfo-2 elisp code).
* Makefile: updated "gdb.dvi" target to use M4 preprocessor;
put in comments-for-future gdb.info target (one day makeinfo will
work again).
Roland Pesch [Tue, 14 May 1991 22:01:19 +0000 (22:01 +0000)]
*** empty log message ***
Roland Pesch [Tue, 14 May 1991 20:55:08 +0000 (20:55 +0000)]
*** empty log message ***
Steve Chamberlain [Tue, 14 May 1991 18:53:33 +0000 (18:53 +0000)]
Added make dep
Made filenames suitable for PCs
Steve Chamberlain [Tue, 14 May 1991 18:52:40 +0000 (18:52 +0000)]
Fixed problem with default output filename
This page took 0.036938 seconds and 4 git commands to generate.