IB/hfi1: Allow remove MMU callbacks to free nodes

In order to allow the remove MMU callbacks to free the
RB nodes, it is necessary to prevent any references to
the nodes after the remove callback has been called.

Therefore, remove the node from the tree prior to calling
the callback. In other words, the MMU/RB API now guarantees
that all RB node operations it performs will be done prior
to calling the remove callback and that the RB node will
not be touched afterwards.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Prevent NULL pointer dereference

Prevent a potential NULL pointer dereference (found
by code inspection) when unregistering an MMU handler.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Allow MMU function execution in IRQ context

Future users of the MMU/RB functions might be searching or
manipulating the MMU RB trees in interrupt context. Therefore,
the MMU/RB functions need to be able to run in interrupt
context. This requires that we use the IRQ-aware API for
spin locks.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Re-factor MMU notification code

The MMU notification code added to the
expected receive side has been re-factored and
split into it's own file. This was done in
order to make the code more general and, therefore,
usable by other parts of the driver.

The caching behavior remains the same. However,
the handling of the RB tree (insertion, deletions,
and searching) as well as the MMU invalidation
processing is now handled by functions in the
mmu_rb.[ch] files.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rdmavt: Post receive for QP in ERR state

Accordingly IB Spec post WR to receive queue must
complete with error if QP is in Error state.
Please refer to C10-42, C10-97.2.1

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Enable adaptive pio by default

Set the piothreshold to the agreed upon default of 256B.

Reviewed-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Fix adaptive pio packet corruption

The adaptive pio heuristic missed a case that causes a corrupted
packet on the wire.

The case is if SDMA egress had been chosen for a pio-able packet and
then encountered a ring space wait, the packet is queued.   The sge
cursor had been incremented as part of the packet build out for SDMA.

After the send engine restart, the heuristic might now chose pio based
on the sdma count being zero and start the mmio copy using the already
incremented sge cursor.

Fix this by forcing SDMA egress when the SDMA descriptor has already
been built.

Additionally, the code to wait for a QPs pio count to zero when
switching to SDMA was missing.  Add it.

There is also an issue with UD QPs, in that the different SLs can pick
a different egress send context.  For now, just insure the UD/GSI
always go through SDMA.

Reviewed-by: Vennila Megavannan <vennila.megavannan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Fix panic in adaptive pio

The following panic occurs while running ib_send_bw -a with
adaptive pio turned on:

[ 8551.143596] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 8551.152986] IP: [<ffffffffa0902a94>] pio_wait.isra.21+0x34/0x190 [hfi1]
[ 8551.160926] PGD 80db21067 PUD 80bb45067 PMD 0
[ 8551.166431] Oops: 0000 [#1] SMP
[ 8551.276725] task: ffff880816bf15c0 ti: ffff880812ac0000 task.ti: ffff880812ac0000
[ 8551.285705] RIP: 0010:[<ffffffffa0902a94>] pio_wait.isra.21+0x34/0x190 [hfi1]
[ 8551.296462] RSP: 0018:ffff880812ac3b58  EFLAGS: 00010282
[ 8551.303029] RAX: 000000000000002d RBX: 0000000000000000 RCX: 0000000000000800
[ 8551.311633] RDX: ffff880812ac3c08 RSI: 0000000000000000 RDI: ffff8800b6665e40
[ 8551.320228] RBP: ffff880812ac3ba0 R08: 0000000000001000 R09: ffffffffa09039a0
[ 8551.328820] R10: ffff880817a0c000 R11: 0000000000000000 R12: ffff8800b6665e40
[ 8551.337406] R13: ffff880817a0c000 R14: ffff8800b6665800 R15: ffff8800b6665e40
[ 8551.355640] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 8551.362674] CR2: 0000000000000000 CR3: 000000080abe8000 CR4: 00000000001406e0
[ 8551.371262] Stack:
[ 8551.374119]  ffff880812ac3bf0 ffff88080cf54010 ffff880800000800 ffff880812ac3c08
[ 8551.383036]  ffff8800b6665800 ffff8800b6665e40 0000000000000202 ffffffffa08e7b80
[ 8551.391941]  00000001007de431 ffff880812ac3bc8 ffffffffa0904645 ffff8800b6665800
[ 8551.400859] Call Trace:
[ 8551.404214]  [<ffffffffa08e7b80>] ? hfi1_del_timers_sync+0x30/0x30 [hfi1]
[ 8551.412417]  [<ffffffffa0904645>] hfi1_verbs_send+0x215/0x330 [hfi1]
[ 8551.420154]  [<ffffffffa08ec126>] hfi1_do_send+0x166/0x350 [hfi1]
[ 8551.427618]  [<ffffffffa055a533>] rvt_post_send+0x533/0x6a0 [rdmavt]
[ 8551.435367]  [<ffffffffa050760f>] ib_uverbs_post_send+0x30f/0x530 [ib_uverbs]
[ 8551.443999]  [<ffffffffa0501367>] ib_uverbs_write+0x117/0x380 [ib_uverbs]
[ 8551.452269]  [<ffffffff815810ab>] ? sock_recvmsg+0x3b/0x50
[ 8551.459071]  [<ffffffff81581152>] ? sock_read_iter+0x92/0xe0
[ 8551.466068]  [<ffffffff81212857>] __vfs_write+0x37/0x100
[ 8551.472692]  [<ffffffff81213532>] ? rw_verify_area+0x52/0xd0
[ 8551.479682]  [<ffffffff81213782>] vfs_write+0xa2/0x1a0
[ 8551.486089]  [<ffffffff81003176>] ? do_audit_syscall_entry+0x66/0x70
[ 8551.493891]  [<ffffffff812146c5>] SyS_write+0x55/0xc0
[ 8551.500220]  [<ffffffff816ae0ee>] entry_SYSCALL_64_fastpath+0x12/0x71
[ 8551.531284] RIP  [<ffffffffa0902a94>] pio_wait.isra.21+0x34/0x190 [hfi1]
[ 8551.539508]  RSP <ffff880812ac3b58>
[ 8551.544110] CR2: 0000000000000000

The priv s_sendcontext pointer was not setup properly.  Fix with this
patch by using the s_sendcontext and eliminating its send engine use.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Fix PIO wakeup timing hole

There is a timing hole if there had been greater than
PIO_WAIT_BATCH_SIZE waiters.  This code will dispatch the first
batch but leave the others in the queue.   If the restarted waiters
don't in turn wait on a buffer, there is a hang.

Fix by forcing a return when the QP queue is non-empty.

Reviewed-by: Vennila Megavannan <vennila.megavannan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Fix ordering of trace for accuracy

The postitioning of the sdma ibhdr trace was
causing an extra trace message when the tx send
returned -EBUSY.

Move the trace to just before the return
and handle negative return values to avoid
any trace.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Add unique trace point for pio and sdma send

This allows for separately enabling pio and sdma
tracepoints to cut the volume of trace information.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Fix issues with qp_stats print

The changes are to aid in coorelating trace information
with QPs between the trace and qp_stats information

Such changes include adds a space after QP and clarifying that the second
QP is actually the remote QP.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Report pid in qp_stats to aid debug

Tracking user/QP ownership is needed to debug issues with
user ULPs like OpenMPI.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Improve LED beaconing

The current LED beaconing code is unclear and uses the timer handler to
turn off the timer. This patch simplifies the code by removing the
special semantics of timeon = timeoff = 0 being interpreted as a request
to turn off the beaconing.

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Don't call cond_resched in atomic mode when sending packets

This patch fixed the problem where the driver might reschedule in atomic
mode when sending packets. This is due to the fact that the call to
cond_resched() in hfi1_do_send() might occur in atomic mode and a check is
required to avoid the warning message:
    "kernel: BUG: scheduling while atomic: swapper/2/0/0x10000100."

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Add adaptive cacheless verbs copy

The kernel memcpy is faster than a cacheless copy.  However,
if too much of the L3 cache is overwritten by one-time copies
then overall bandwidth suffers.  Implement an adaptive scheme
where full page copies are tracked and if the number of unique
entries are larger than a threshold, verbs will use a cacheless
copy.  Tracked entries are gradually cleaned, allowing memcpy to
resume once the larger copies have stopped.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Handle host handshake timeout

Host handshake timeout can occur during the verify capability
state. This is a LNI related failure and should be
handled in the same way as other LNI failures.

Reviewed-by: Dean Luick <dean.luick@intel.com>
Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Add ASIC flag view/clear

Different OSes using parts of the same hardware may leave
cross-device flags set.  Export a debugfs file to view and
clear these flags if needed.

Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Hold i2c resource across debugfs open/close

External i2c firmware updates are done in multiple steps and
cannot have other things done in between.  For debugfs files,
acquire the resource on open and release it on close.

Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Reduce hardware mutex timeout

The hardware mutex is now held only long enough to set
or clear flags.  Reduce the timeout to something more
reasonable.

Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Remove unused HFI1_DO_INIT_ASIC flag

The flag HFI1_DO_INIT_ASIC flag is no longer used.  Remove
the flag and the code that sets it.

Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Change thermal init to use resource reservation

Use the resource reservation system to flag that the ASIC
thermal has been initialized.

Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Change QSFP functions to use resource reservation

Remove the mutex guarding each operation in favor the ASIC
resource acquire/release.  Push the resource acquire/release,
above each operation call to allow exclusive access across
multiple operations.

Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Change SBus handling to use resource reservation

The SBus resource includes SBUS, PCIE, and THERM registers.
Change SBus handling to use the new ASIC resource reservation system.

Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Change EPROM handling to use resource reservation

Change EPROM handling to use the new ASIC resource reservation system.

Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Add ASIC resource reservation functions

The ASIC block is a shared hardware resource between two devices
on the chip.  Add functions to acquire and release these resources
in a way that is safe for both multiple users on the same OS
and multiple users on different OSes, while holding the hardware
mutex as little as possible.

Reservations are noted in a scratch register in the shared region.
There are two types of reservations: per-HFI dynamic and permanent.

Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Add shared ASIC structure

Create a shared structure to exist between devices that share the
same ASIC.

Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Remove ASIC block clear

The ASIC block is shared between two HFIs. Individual devices
should not initialize registers there. Retain the power-on values.
Individual users set registers as needed with one exception.
Clear sbus fast mode on "slow" calls.

Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Replace kmalloc and memcpy with a kmemdup

This change was recommended by Coccinelle tool when I ran the command:
-bash-4.2$ make coccicheck MODE=patch M=drivers/infiniband/hw/hfi1/

Reviewed-by: Jubin John <jubin.john@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Move constant to the right in bitwise operations

Implement changes recommended by the Coccinelle tool to move constant to
the right in bitwise operations

-bash-4.2$ make coccicheck MODE=report M=drivers/infiniband/hw/hfi1/

drivers/infiniband/hw/hfi1/pio.c:765:4-16: Move constant to right.
drivers/infiniband/hw/hfi1/rc.c:2503:19-29: Move constant to right.
drivers/infiniband/hw/hfi1/chip.c:9813:11-22: Move constant to right.
drivers/infiniband/hw/hfi1/chip.c:14468:29-40: Move constant to right.

Reviewed-by: Jubin John <jubin.john@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Add the break statement that was removed in an earlier patch

The break statement was unintentionally removed in this patch
commit 41ca419abc0ca7ee65d765408cdc1a7fed2897a3
("staging/rdma/hfi1: Remove hfi1 MR and hfi1 specific qp type")

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Fix memory leaks

Fix 3 memory leaks reported by the LeakCheck tool in the KEDR framework.

The following resources were allocated memory during their respective
initializations but not freed during cleanup:
1. SDMA map elements
2. PIO map elements
3. HW send context to SW index map

This patch fixes the memory leaks by freeing the allocated memory in the
cleanup path.

Reviewed-by: Dean Luick <dean.luick@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Fix reporting of LED status in Get(LedInfo) and Get(PortInfo)

The LedInfo SMA attribute is redefined to control the LED beaconing
state machine instead of the LED directly. In accordance, we now
return the state of LED beaconing, represented by whether the beaconing
timer is active, instead of the state of the LED itself for SMA queries
Get(LedInfo) and Get(PortInfo). While we are at it, we fix the beaconing
timer control code so that the state of the timer is accurately updated.

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Check interrupt registers mapping

This patch tests the interrupt registers when the driver has no access to
its upstream component. In this case, it is highly likely that it is
running in a virtual machine (eg, Qemu-kvm guest). If the interrupt
registers are not mapped properly by the virtual machine monitor, an
error message will be printed and the probing will be terminated. This
will help the user identify the issue. On the other hand, if the driver
is running in a host or has access to its upstream component in some
other VM, it will do nothing.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Avoid using upstream component if it is not accessible

When the hfi1 device is assigned to a VM (eg KVM), the hfi1 driver has
no access to the upstream component and therefore cannot use it to perform
some operations, such as secondary bus reset. As a result, the hfi1 driver
cannot perform the pcie Gen3 transition. Instead, those operation should
be done in the host environment, preferrably done during the Option ROM
initialization. Similarly, the hfi1 driver cannot support ASPM and tune
the pcie capability under this circumstance.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Fix header size calculation for RC/UC QPs with GRH enabled

There is a header size counter in both the QP struture and the txreq
structure. The counter in the txreq structure is not updated properly
for RC and UC queue pairs with GRH enabled, and thus causing SDMA
send to fail. This patch fixes the RC and UC path.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Dean Luick <dean.luick@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rdmavt: Check lkey_table_size value before use

The lkey_table_size driver specific parameter value is used before its
value is sanity checked and restricted to RVT_MAX_LKEY_TABLE_BITS.

This causes a vmalloc allocation failure for large values. Fix this
by moving the value check before the first usage of the value.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Fix counter read for cp

A cp or cat of /sys/kernel/debug/hfi1/hfi1_0/port1counters
produces the following message:

hfi1 0000:81:00.0: hfi1_0: index not supported
hfi1 0000:81:00.0: hfi1_0: read_cntrs does not support indexing

Fix by removing the file position logic and the associated messages
and make the file positioning the responsibility of the caller.

The port counter read function argument is changed to the per port
data structure since the counters are relative to the port and not
the device.

Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Guard i2c access against cp

An attempt to cp or cat /sys/kernel/debug/hfi1/hfi1_0/i2c1
produces this message:

hfi1 0000:81:00.0: hfi1_0: IB0:1 I2C failed even retrying

Fix the issue by explicitly rejecting a simple cat/cp with an
-EINVAL error return.

Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rdamvt: fix cross build with rdmavt

The new check routine causes a larger than supported frame size
on s390.

Changing the check routine to noinline fixes the issue.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Disclose more information when i2c fails

Improve logging messages when there are i2c failures.
Clean i2c read error handling.

Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Fix debugfs access race

Debugfs access races with the driver being ready.  Make sure the
driver is ready before debugfs files appear and debufs files are
gone before the driver starts tearing down.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Cleanup comments and logs in PHY code

This is a set of minor fixes including comment and log message cleanups
and improvements to the PHY layer code.

Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Fix xmit discard error weight

Count only the errors that apply to xmit discards.  Update
the comment to better explain the limitations of the count.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: fix 0-day syntax error

Setting CONFIG_HFI1_DEBUG_SDMA_ORDER causes a syntax error:
sdma.c: In function ‘complete_tx’:
sdma.c:370: error: ‘txp’ undeclared (first use in
this function)
sdma.c:370: error: (Each undeclared identifier is reported only once
sdma.c:370: error: for each function it appears in.)

Adjust code under ifdef to reference the tx properly.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Fix header

Fix the header by moving the copyright notice out of the license text
and to the top of the header. Also, update the copyright date.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Remove else after break

Remove else after break to fix checkpatch warning:
WARNING: else is not generally useful after a break or return

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Add braces on all arms of statement

Add braces on all arms of statements to fix checkpatch check:
CHECK: braces {} should be used on all arms of this statement

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Fix code alignment

Fix code alignment to fix checkpatch check:
CHECK: Alignment should match open parenthesis

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Fix block comments

Fix block comments with proper formatting to fix checkpatch warnings:
WARNING: Block comments use * on subsequent lines
WARNING: Block comments use a trailing */ on a separate line

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Add comment for spinlock_t definition

Add comments describing the spinlock for spinlock_t definitions to
fix checkpatch check:
CHECK: spinlock_t definition without comment

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Remove void function return statement

Remove return statement at the end of a void function to fix
checkpatch warning:
WARNING: void function return statements are not generally useful

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Use pointer instead of struct name

Use sizeof(*p) instead of sizeof(struct foo) to fix checkpatch check:
CHECK: Prefer alloc(sizeof(*p)...) over alloc(sizeof(struct foo)...)

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Remove CamelCase

Remove CamelCase to fix checkpatch check:
CHECK: Avoid CamelCase: <PLS_CONFIGPHY_ESTcOMM_LOCAL_COMPLETE>

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Fix misspellings

Fix misspelled word based on checkpatch check:
CHECK: 'ffoo' may be misspelled - perhaps 'foo'?

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Split multiple assignments

Split multiple assignments into individual assignments to fix
checkpatch check:
CHECK: multiple assignments should be avoided

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Use BIT_ULL macro

Use BIT_ULL macro to fix checkpatch check:
CHECK: Prefer using the BIT_ULL macro

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Remove unnecessary parentheses

Remove unnecessary parentheses around addressof single $Lvals to fix
checkpatch check:
CHECK: Unnecessary parentheses around $var

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Add blank link after declarations

Add blank line after declarations to fix checkpatch check:
CHECK: Please use a blank line after function/struct/union/enum
declarations

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Fix logical continuations

Move logical continuations to previous line to fix checkpatch check:
CHECK: Logical continuations should be on the previous line

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Remove blank line before close brace

Remove extra blank line before close brace to fix checkpatch check:
CHECK: Blank lines aren't necessary before a close brace '}'

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Remove blank line after an open brace

Remove blank line after an open brace to fix checkpatch check:
CHECK: Blank lines aren't necessary after an open brace '{'

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Fix comparison to NULL

Convert pointer comparisons to NULL to !pointer
to fix checkpatch check:
CHECK: Comparison to NULL could be written "!pointer"

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Remove space after cast

Remove the space after a cast to fix checkpatch check:
CHECK: No space is necessary after a cast

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Remove multiple blank lines

Remove multiple blank lines to fix checkpatch check:
CHECK: Please don't use multiple blank lines

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Add spaces around binary operators

Add spaces around binary operators.

Fixes checkpatch check:
CHECK: spaces preferred around that 'x'
where x is a binary operator

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: add cq head and tail information to qpstats

This enables debugging issues related to cq event signalling mechanism

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Vennila Megavannan <vennila.megavannan@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Add send context sw index

Print the qp's send context sw index in the qpstats

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Determine actual operational VLs

Use shared credits and dedicated credits for each VL to determine
the actual number of operational VLs.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Add qp to send context mapping for PIO

PIO send context mapping is changed from per-VL to QPN based.

qp to send context mapping is done using a mapping infrastructure
similar to the current vl to sdma engine mapping.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi: fix CQ completion order issue

The current implementation of the sdma_wait variable
has a timing hole that can cause a completion Q entry
to be returned from a pio send prior to an older
sdma packets completion queue entry.

The sdma_wait variable used to be decremented prior to
calling the packet complete routine.  The hole is between decrement
and the verbs completion where send engine using pio could return
a out of order completion in that window.

This patch closes the hole by allowing an API option to
specify an sdma_drained callback.   The atomic dec
is positioned after the complete callback to avoid the
window as long as the pio path doesn't execute when
there is a non-zero sdma count.

Reviewed-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/qib, staging/rdma/hfi1, IB/rdmavt: progress selection changes

The non-rdamvt versions of qib and hfi1 allow for a differing
heuristic to override a schedule progress in favor of a direct
call the the progress routine.

This patch adds that for both drivers and rdmavt.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Adaptive PIO for short messages

The change requires a new pio_busy field in the iowait structure to
track the number of outstanding pios.  The new counter together
with the sdma counter serve as the basis for a packet by packet decision
as to which egress mechanism to use.  Since packets given to different
egress mechanisms are not ordered, this scheme will preserve the order.

The iowait drain/wait mechanisms are extended for a pio case.  An
additional qp wait flag is added for the PIO drain wait case.

Currently the only pio wait is for buffers, so the no_bufs_available()
routine name is changed to pio_wait() and a third argument is passed
with one of the two pio wait flags to generalize the routine.  A module
parameter is added to hold a configurable threshold. For now, the
module parameter is zero.

A heuristic routine is added to return the func pointer of the proper
egress routine to use.

The heuristic is as follows:
- SMI always uses pio
- GSI,UD qps <= threshold use pio
- UD qps > threadhold use sdma
  o No coordination with sdma is required because order is not required
    and this qp pio count is not maintained for UD
- RC/UC ONLY packets <= threshold chose as follows:
  o If sdmas pending, use SDMA
  o Otherwise use pio and enable the pio tracking count at
    the time the pio buffer is allocated
- RC/UC ONLY packets > threshold use SDMA
  o If pio's are pending the pio_wait with the new wait flag is
    called to delay for pios to drain

The threshold is potentially reduced by the QP's mtu.

The sc_buffer_alloc() has two additional args (a callback, a void *)
which are exploited by the RC/UC cases to pass a new complete routine
and a qp *.

When the shadow ring completes the credit associated with a packet,
the new complete routine is called.  The verbs_pio_complete() will then
decrement the busy count and trigger any drain waiters in qp destroy
or reset.

Reviewed-by: Jubin John <jubin.john@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: use u8 for vl/sl

The use should match the universal container size.

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: fix panic in send engine

The send engine wasn't correctly handling
pre-built packets, and worse, the pointer to
a packet state's txreq wasn't initialized correctly.

To fix:
- all waiters need to save any prebuilt packets
  (smda waits already did)
- the progress routine needs to handle a QPs prebuilt packet
  and initialize the txreq pointer properly

To keep SDMA working, the dma send code needs to see if
a packet has been built already. If not the code will build
it.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: avoid passing pmtu

It is in the qp.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Add s_sendcontext priv field

s_sendcontext will be used to map the QPs to the send contexts
for PIO.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: remove s_rdma_mr

It can be conveyed in the verbs_txreq.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Remove header memcpy from sdma send path.

Instead of writing the header into a buffer then copying it into another
buffer to be sent, remove that memcpy and instead build the header directly
into the tx request that will be sent.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Vennila Megavannan <vennila.megavannan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: move txreq header code

The patch separates the txreq defines into new files, one for
verbs and one for sdma.

The verbs_txreq implementation handles the setup and teardown
of the txreq cache, so the register routine is changed to call
the new init/exit routines.

This patch allows for followup patches enhance the send engine.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rdmvt: close send engine struct holes

pahole noted the wasted 4 bytes after s_lock and r_lock.

Move s_flags and r_psn to fill the holes.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: add s_avail to qp_stats

This diagnostic capability was missed in the dual lock series.

Signed-off-by: Vennila Megavannan <vennila.megavannan@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/qib: Destroy SMI AH before de-allocating the protection domain

If SMI AH is not destroyed before de-allocating the PD, it would result in
non-zero PD use count when de-allocating the PD, triggering a WARN_ON() at
drivers/infiniband/core/verbs.c:284 ib_dealloc_pd+0x69/0xb0 [ib_core]()
when unloading the qib driver on systems with dual-port card.

This problem has always been there in qib and was detected only after the
commit 7dd78647a2c2 ("IB/core: Make ib_dealloc_pd return void") introduced
a WARN_ON in ib_dealloc_pd() that triggers if a PD's use count is non-zero
before de-allocating the PD.

Below is the call trace from the dmesg log.

[ 7264.966129] Call Trace:
[ 7264.969652]  [<ffffffff81338470>] dump_stack+0x44/0x64
[ 7264.976181]  [<ffffffff81086bb6>] warn_slowpath_common+0x86/0xc0
[ 7264.983656]  [<ffffffff81086cfa>] warn_slowpath_null+0x1a/0x20
[ 7264.990961]  [<ffffffffa025c2d9>] ib_dealloc_pd+0x69/0xb0 [ib_core]
[ 7264.998717]  [<ffffffffa0044de8>] ib_mad_port_close+0xb8/0x120 [ib_mad]
[ 7265.006866]  [<ffffffffa0044ebf>] ib_mad_remove_device+0x6f/0xc0 [ib_mad]
[ 7265.015224]  [<ffffffffa025fc87>] ib_unregister_device+0xa7/0x140 [ib_core]
[ 7265.023738]  [<ffffffffa04b5b79>] rvt_unregister_device+0x29/0x80 [rdmavt]
[ 7265.032181]  [<ffffffffa088d2a2>] qib_unregister_ib_device+0x22/0x210 [ib_qib]
[ 7265.040993]  [<ffffffffa085f73f>] qib_remove_one+0x1f/0x250 [ib_qib]
[ 7265.048823]  [<ffffffff8137a319>] pci_device_remove+0x39/0xc0
[ 7265.055984]  [<ffffffff81466a1a>] __device_release_driver+0x9a/0x140
[ 7265.063821]  [<ffffffff81466bc8>] driver_detach+0xb8/0xc0
[ 7265.070579]  [<ffffffff81465a15>] bus_remove_driver+0x55/0xd0
[ 7265.077717]  [<ffffffff8146732c>] driver_unregister+0x2c/0x50
[ 7265.084849]  [<ffffffff813789ba>] pci_unregister_driver+0x2a/0x80
[ 7265.092366]  [<ffffffffa08921bd>] qib_ib_cleanup+0x37/0x65 [ib_qib]
[ 7265.100068]  [<ffffffff811096d0>] SyS_delete_module+0x190/0x220
[ 7265.107379]  [<ffffffff816a7bae>] entry_SYSCALL_64_fastpath+0x12/0x71

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rdmavt: Remove unnecessary exported functions

Remove exported functions which are no longer required as the
functionality has moved into rdmavt. This also requires re-ordering some
of the functions since their prototype no longer appears in a header
file. Rather than add forward declarations it is just cleaner to
re-order some of the functions.

Reviewed-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rdmavt: Remove signal_supported and comments

Initially it was intended that rdmavt would support some signaling
between the underlying driver and itself. However this turned out to be
unnecessary for qib and hfi1. If we need to add something like this in
later to support another driver we should do it then. As of now this
essentially dead code so remove it.

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rdmavt: Remove RVT_FLAGs

While hfi1 and qib were still supporting bits and pieces of core verbs
components there needed to be a way to convey if rdmavt should handle
allocation and initialize of resources like the queue pair table. Now
that all of this is moved into rdmavt there is no need for these flags.
They are no longer used in the drivers.

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/qib,rdmavt: Move smi_ah to qib

Rdmavt adopted an smi_ah from qib which is not needed by hfi1. Move this
back to qib and get it out of the common library.

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/qib: Setup notify free/create mad agent callbacks for rdmavt

Qib needs to be notified when mad agents are created and freed, there is
some counter maintenance that needs to be performed. Add those callbacks at
registration time with rdmavt.

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rdmavt: Add per verb driver callback checking

For each verb validate that all requirements for driver callbacks are met.
If a function is called without checking for a valid pointer, it is a
required function. Also document what each callback function does.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rdmavt: Clean up comments and add more documentation

Add, remove, and otherwise clean up existing comments that are leftover
from the initial code postings of rdmavt. Many of the comments were added
to provide an idea on the direction we were thinking of going. Now that the
design is solidified make a pass over and clean everything up. Also add
details where lacking.

Ensure all non static functions have nano comments.

Reviewed-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Put QPs into error state after SL->SC table changes

If an SL->SC mapping table change occurs after an RC/UC QP is created,
there is no mechanism to change the SC nor the VL for that QP. The fix
is to place the QP into error state so that ULP can recreate the QP with
the new SL->SC mapping.

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rdmavt: Add trace and error print statements in post_one_wr

These trace and error print statements would help in debugging issues which
are caused due to messed up QP ring buffer pointers.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/qib, staging/rdma/hfi1: add s_hlock for use in post send

This patch adds an additional lock to reduce contention on the s_lock.

This lock is used in post_send() so that the post_send is not
serialized with the send engine and other send related processing.

To do this the s_next_psn is now maintained on post_send() while
post_send() related fields are moved to a new cache line.  There is
an s_avail maintained for the post_send() to mitigate trading cache
lines with the send engine.  The lock is released/acquired around
releasing the just built packet to the egress mechanism.

Reviewed-by: Jubin John <jubin.john@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/qib: Rename several functions by adding a "qib_" prefix

This would avoid conflict with the functions in hfi1 that have similar
names when both qib and hfi1 drivers are configured to be built into
the kernel. This issue came up in the 0-day build report.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rdmavt, staging/rdma/hfi1: use qps to dynamically scale timeout value

A busy_jiffies variable is maintained and updated when rc qps are
created and deleted. busy_jiffies is a scaled value of the number
of rc qps in the device. busy_jiffies is incremented every rc qp
scaling interval. busy_jiffies is added to the rc timeout
in add_retry_timer and mod_retry_timer. The rc qp scaling interval
is selected based on extensive performance evaluation of targeted
workloads.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Vennila Megavannan <vennila.megavannan@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Turning off LED without checking if stepping is Ax

It prevents the LED from staying on when the QSFP module is
not present.

Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: actually use new RNR timer API in loopback path

The patch series which added a new API for the RNR timer did not include an
updated call in the loopback path. RC/UC RNR loopback would be broken
without this.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Tune for unknown channel if configuration file is absent

Currently, the driver fails to tune the SerDes and therefore prevents
link up if the configuration file is missing or fails parsing or
validation. This patch adds a fallback option so that the 8051 is asked
to tune for an unknown channel and possibly get the link up if tuning
succeeds. It also adds a user-friendly message to update the
configuration file if it is out-of-date.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Fetch platform configuration data from EFI variable

The platform configuration data has been moved into the EFI variable
store where it is populated by the HFI1 option ROM. This patch pulls
the configuration data from the new location, retaining a fallback to
request_firmware.

Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/qib,staging/rdma/hfi1: use setup_timer api

Replace the timer API's to initialize a timer & then assign the callback
function by the setup_timer() API.

Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>