Olof Johansson [Sat, 19 Jul 2014 18:49:16 +0000 (11:49 -0700)]
Merge tag 'keystone-dts' of git://git./linux/kernel/git/ssantosh/linux-keystone into next/dt
Merge "Keystone DTS update for 3.17" from Santosh Shilimkar:
Keystone DTS update for 3.17
- Ethernet clock tree fix.
- MDIO device tree node. Respective driver update is already queued.
- Ethernet phy node. Respective driver update is already queued.
* tag 'keystone-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
ARM: dts: keystone-evm: add 1g ethernet phys nodes
ARM: dts: keystone: add mdio devices entries
ARM: dts: keystone: fix netcp's clocks definitions
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 19 Jul 2014 05:16:15 +0000 (22:16 -0700)]
Merge tag 'omap-for-v3.17/dt-part1' of git://git./linux/kernel/git/tmlind/linux-omap into next/dt
Merge "omap dts changes for v3.17 merge window, part1" from Tony Lindgren:
First set of .dts changes for omaps for v3.17 merge window:
- Enable irqchip crossbar interrupt mapping. These changes
are based on an immutable irqchip branch set up by Jason
Cooper to make it easier to merge the related .dts changes.
- Removal of omap2 related static clock data that now comes
from device tree.
- Enabling of PHY regulators for various omaps
- Enabling of PCIe for dra7
- Add support for am437x starterkit
- Enable audio for for omap5
- Enable display and am335x-evmsk
* tag 'omap-for-v3.17/dt-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (43 commits)
ARM: DTS: omap5-uevm: Enable basic audio (McPDM <-> twl6040)
ARM: DTS: omap5-uevm: Add node for twl6040 audio codec
ARM: DTS: omap5-uevm: Enable palmas clk32kgaudio clock
ARM: dts: dra7: Add dt data for PCIe controller
ARM: dts: dra7: Add dt data for PCIe PHY
ARM: dts: dra7: Add dt data for PCIe PHY control module
ARM: dts: dra7xx-clocks: Add missing clocks for second PCIe PHY instance
ARM: dts: dra7xx-clocks: rename pcie clocks to accommodate second PHY instance
ARM: dts: dra7xx-clocks: Add missing 32KHz clocks used for PHY
ARM: dts: dra7xx-clocks: Change the parent of apll_pcie_in_clk_mux to dpll_pcie_ref_m2ldo_ck
ARM: dts: dra7xx-clocks: Add divider table to optfclk_pciephy_div clock
ARM: dts: dra7-evm: Add regulator information to USB2 PHYs
ARM: omap2plus_defconfig: enable TPS65218 configs
ARM: dts: AM437x: Add TPS65218 device tree nodes
ARM: dts: AM437x: Fix i2c nodes indentation
ARM: dts: AM43x: Add TPS65218 device tree nodes
ARM: dts: Add devicetree for Gumstix Pepper board
ARM: dts: dra7: add crossbar device binding
ARM: dts: dra7: add routable-irqs property for gic node
ARM: OMAP24xx: clock: remove legacy clock data
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 19 Jul 2014 04:39:29 +0000 (21:39 -0700)]
Merge tag 'renesas-dt3-for-v3.17' of git://git./linux/kernel/git/horms/renesas into next/dt
Merge "Third Round of Renesas ARM Based SoC DT Updates for v3.17" from Simon
Horman:
* Initialise SCI using DT when booting the kzm9g, armadillo800eva,
ape6evm and bockw boards without legacy-C code.
* tag 'renesas-dt3-for-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (24 commits)
ARM: shmobile: kzm9g-reference: Initialise SCIF device using DT
ARM: shmobile: sh73a0: Add SCIF nodes
ARM: shmobile: armadillo800eva-reference: Initialise SCIF device using DT
ARM: shmobile: r8a7740: Add SCIF nodes
ARM: shmobile: ape6evm-reference: Initialise SCIF device using DT
ARM: shmobile: r8a73a4: Add SCIF nodes
ARM: shmobile: bockw-reference: Initialise SCIF device using DT
ARM: shmobile: r8a7778: Add SCIF nodes
ARM: shmobile: sh73a0: add SCI clock support for DT
ARM: shmobile: r8a7740: correct SCI clock support for DT
ARM: shmobile: r8a73a4: add SCI clock support for DT
ARM: shmobile: r8a7778: add SCI clock support for DT
ARM: shmobile: r8a7790: lager: use iic cores instead of i2c
ARM: shmobile: Lager: Correct I2C bus for VDD MPU regulator
ARM: shmobile: kzm9g-reference: Remove early_printk from command line
ARM: shmobile: armadillo800eva-reference: Remove early_printk from command line
ARM: shmobile: r8a7779: Consistently use tabs for indentation
ARM: shmobile: henninger: Consistently use tabs for indentation
ARM: shmobile: henninger: enable internal PCI
ARM: shmobile: koelsch: enable internal PCI
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Grygorii Strashko [Wed, 9 Jul 2014 13:14:19 +0000 (16:14 +0300)]
ARM: dts: keystone-evm: add 1g ethernet phys nodes
Keystone EVMK2HX has two 1G Marvell
88E1111 Ethernet PHYs
installed, so add corresponding child nodes for 1G MDIO bus
and enable it.
For more information see schematics:
http://wfcache.advantech.com/www/support/TI-EVM/download/Schematics/PDF/K2H_K2EVM-HK_SCH_A102_Rev1_0.pdf
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Grygorii Strashko [Thu, 17 Jul 2014 14:58:07 +0000 (17:58 +0300)]
ARM: dts: keystone: add mdio devices entries
The Keystone 2 has MDIO HW block which are compatible
to Davinci SoCs:
See "Gigabit Ethernet (GbE) Switch Subsystem"
See http://www.ti.com/lit/ug/sprugv9d/sprugv9d.pdf
Hence, add corresponding DT entry for Keystone 2.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Peter Ujfalusi [Thu, 10 Jul 2014 11:24:03 +0000 (14:24 +0300)]
ARM: DTS: omap5-uevm: Enable basic audio (McPDM <-> twl6040)
The board uses twl6040 codec connected via McPDM link. McBSP1 and McBSP2 can
be used for FM/BT.
At the same time move the pinctrl handling to the correct place - under the
corresponding nodes.
Audio connectors on the board:
Headset in/out
Stereo Line out
Stereo Line in.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Peter Ujfalusi [Thu, 10 Jul 2014 11:24:02 +0000 (14:24 +0300)]
ARM: DTS: omap5-uevm: Add node for twl6040 audio codec
The board uses twl6040 as audio codec. Move the corresponding pinctrl as
well under the node.
twl6040 needs 32k clock from palams.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Peter Ujfalusi [Thu, 10 Jul 2014 11:24:01 +0000 (14:24 +0300)]
ARM: DTS: omap5-uevm: Enable palmas clk32kgaudio clock
clk32kg-audio clock is needed for twl6040 codec.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Kishon Vijay Abraham I [Mon, 14 Jul 2014 10:42:23 +0000 (16:12 +0530)]
ARM: dts: dra7: Add dt data for PCIe controller
Added dt data for PCIe controller. This node contains dt data for
both the DRA7 part of designware controller and for the designware core.
The documention for this node can be found @ ../bindings/pci/ti-pci.txt.
Cc: Tony Lindgren <tony@atomide.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jingoo Han <jg1.han@samsung.com>
Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Kishon Vijay Abraham I [Mon, 14 Jul 2014 10:42:22 +0000 (16:12 +0530)]
ARM: dts: dra7: Add dt data for PCIe PHY
Added dt data for PCIe PHY as a child node of ocp2scp3.
The documention for this node can be found @ ../bindings/phy/ti-phy.txt.
26.3.3 PCIe Shared PHY Subsystem Integration in vE of DRA7xx ES1.0
describes the PCIe PHY subsystem-related components integrated in the device.
Cc: Tony Lindgren <tony@atomide.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Kumar Gala <galak@codeaurora.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Kishon Vijay Abraham I [Mon, 14 Jul 2014 10:42:21 +0000 (16:12 +0530)]
ARM: dts: dra7: Add dt data for PCIe PHY control module
Added dt data for PCIe PHY control module used by PCIe PHY.
The documention for this node can be found @ ../bindings/phy/ti-phy.txt
Cc: Tony Lindgren <tony@atomide.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Kumar Gala <galak@codeaurora.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Kishon Vijay Abraham I [Mon, 14 Jul 2014 10:42:20 +0000 (16:12 +0530)]
ARM: dts: dra7xx-clocks: Add missing clocks for second PCIe PHY instance
Added missing clocks used by second instance of PCIe PHY.
The documention for this nodes can be found @ ../bindings/clock/ti/gate.txt.
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Kumar Gala <galak@codeaurora.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Kishon Vijay Abraham I [Mon, 14 Jul 2014 10:42:19 +0000 (16:12 +0530)]
ARM: dts: dra7xx-clocks: rename pcie clocks to accommodate second PHY instance
There are two instances of PCIe PHY in DRA7xx. So renamed
optfclk_pciephy_32khz, optfclk_pciephy_clk and optfclk_pciephy_div_clk to
optfclk_pciephy1_32khz, optfclk_pciephy1_clk and optfclk_pciephy1_div_clk
respectively. This is needed for adding the clocks for second PCIe PHY
instance.
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Kumar Gala <galak@codeaurora.org>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Kishon Vijay Abraham I [Mon, 14 Jul 2014 10:42:18 +0000 (16:12 +0530)]
ARM: dts: dra7xx-clocks: Add missing 32KHz clocks used for PHY
Added missing 32KHz clock used by PCIe PHY.
Figure 26-19. PCIe PHY Subsystem Integration in vE of DRA7xx ES1.0 TRM shows
32KHz is used by PCIe PHY.
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Kumar Gala <galak@codeaurora.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Keerthy [Mon, 14 Jul 2014 10:42:17 +0000 (16:12 +0530)]
ARM: dts: dra7xx-clocks: Change the parent of apll_pcie_in_clk_mux to dpll_pcie_ref_m2ldo_ck
Change the parent of apll_pcie_in_clk_mux to dpll_pcie_ref_m2ldo_ck
from dpll_pcie_ref_ck.
Figure 26-22. DPLL_PCIE_REF Functional Block Diagram in vE of DRA7xx ES1.0 TRM
shows the signal name for the output of post divider (M2) is CLKOUTLDO.
Figure 26-21. PCIe PHY Clock Generator Overview shows CLKOUTLDO is used as
input to apll mux.
So the actual output of dpll is dpll_pcie_ref_m2ldo_ck which is also the input
of apll.
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Keerthy [Mon, 14 Jul 2014 10:42:16 +0000 (16:12 +0530)]
ARM: dts: dra7xx-clocks: Add divider table to optfclk_pciephy_div clock
Add divider table to optfclk_pciephy_div clock. The 8th bit of
CM_CLKMODE_APLL_PCIE can be programmed to either 0x0 or 0x1
based on if the divider value is 0x2 or 0x1.
Figure 26-21. PCIe PHY Clock Generator Overview in vE of DRA7xx ES1.0 shows the
block diagram of Clock Generator Subsystem of PCIe PHY module. The divider
value if '1' should be programmed in order to get the correct
PCIE_PHY_DIV_GCLK frequency (2.5GHz).
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Vince Bridgers [Mon, 23 Jun 2014 18:32:11 +0000 (13:32 -0500)]
ARM: socfpga: Add missing #reset-cells to socfpga device tree
add #reset-cells to socfpga.dtsi. This was missing from the
latest updates and caused the socfpga reset controller to fail
to load like so:
ffd05000.rstmgr: /soc/rstmgr@
ffd05000 missing #reset-cells property
probe of
ffd05000.rstmgr failed with error -22
Signed-off-by: Vince Bridgers <vbridgers2013@gmail.com>
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 13 Jul 2014 04:36:50 +0000 (21:36 -0700)]
Merge tag 'ux500-devicetree-v3.16-1' of git://git./linux/kernel/git/linusw/linux-stericsson into next/dt
Merge "Ux500 devicetree changes for v3.17" from Linus Walleij:
Ux500 device tree patches for v3.17:
- Add regulators to STMPE expanders
- Add proper DMA channels for all SD/MMC blocks
- Add sensors to the device tree
* tag 'ux500-devicetree-v3.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
ARM: ux500: add misc sensors to the device trees
ARM: ux500: add some DB8500 DMA channel info
ARM: ux500: add VCC and VIO regulators to STMPE IC
+ Linux 3.16-rc4
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 13 Jul 2014 04:34:22 +0000 (21:34 -0700)]
Merge tag 'at91-dt' of git://github.com/at91linux/linux-at91 into next/dt
Merge "at91: dt for 3.17 #1" from Nicolas Ferre:
First DT update for 3.17:
- move of crystals DT definitions to the /clocks node
- addition of clock entries for sound for CCF enabled platforms
- addition of DMA and DMA + nand on at91sam9rl
- move to CCF for all not-converted-yet AT91 SoCs: at91rm9200, at91sam9260/9g20,
at91sam9g45 family and at91sam9263
* tag 'at91-dt' of git://github.com/at91linux/linux-at91: (43 commits)
ARM: at91/dt: usb_a9263: define crystals frequencies
ARM: at91/dt: tny_a9263: define crystals frequencies
ARM: at91/dt: sam9263ek: define crystals frequencies
ARM: at91: move at91sam9263 SoC to the CCF
ARM: at91/dt: sam9263: define clocks
ARM: at91: prepare common clk transition for sam9263
ARM: at91/dt: cosino define crystals frequencies
ARM: at91/dt: pm9g45: crystals frequencies
ARM: at91/dt: sam9m10g45ek: define crystals frequencies
ARM: at91: move at91sam9g45 SoC to the CCF
ARM: at91/dt: sam9g45: define clocks
ARM: at91: prepare common clk transition for sam9g45
ARM: at91/dt: kizbox: define main crystal frequency
ARM: at91/dt: animeo_ip: define crystals frequencies
ARM: at91/dt: ethernut5: define crystals frequencies
ARM: at91/dt: evk-pro3: define slow crytal frequency
ARM: at91/dt: aks-cdu: define slow crytal frequency
ARM: at91/dt: ge863-pro3: define main crystal frequency
ARM: at91/dt: mpa1600: define crytals frequencies
ARM: at91/dt: qil_a9260: define crystals frequencies
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 12 Jul 2014 16:34:38 +0000 (09:34 -0700)]
Merge tag 'renesas-dt2-for-v3.17' of git://git./linux/kernel/git/horms/renesas into next/dt
Merge "Second Round of Renesas ARM Based SoC DT Updates for v3.17" from Simon
Horman:
- Extend hardware coverage
* Add DVC support for sound nodes on r8a7791 and r8a7790
* Enable internal PCI on r8a7790/lager
* tag 'renesas-dt2-for-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: r8a7791: add DVC support for sound node on DTSI
ARM: shmobile: r8a7790: add DVC support for sound node on DTSI
ARM: shmobile: lager: enable internal PCI
ARM: shmobile: r8a7790: add internal PCI bridge nodes
Signed-off-by: Olof Johansson <olof@lixom.net>
Simon Horman [Mon, 7 Jul 2014 07:54:52 +0000 (09:54 +0200)]
ARM: shmobile: kzm9g-reference: Initialise SCIF device using DT
Initialise SCIF device using DT when booting armadillo800eva
using DT reference.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Mon, 7 Jul 2014 07:54:51 +0000 (09:54 +0200)]
ARM: shmobile: sh73a0: Add SCIF nodes
This describes all of the SCIF hardware of the sh73a0.
Each node is disabled and may be enabled as necessary
by board DTS files.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Mon, 7 Jul 2014 07:54:42 +0000 (09:54 +0200)]
ARM: shmobile: armadillo800eva-reference: Initialise SCIF device using DT
Initialise SCIF device using DT when booting armadillo800eva
using DT reference.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Mon, 7 Jul 2014 07:54:41 +0000 (09:54 +0200)]
ARM: shmobile: r8a7740: Add SCIF nodes
This describes all of the SCIF hardware of the r8a7740.
Each node is disabled and may be enabled as necessary
by board DTS files.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Mon, 7 Jul 2014 07:54:34 +0000 (09:54 +0200)]
ARM: shmobile: ape6evm-reference: Initialise SCIF device using DT
Initialise SCIF device using DT when booting ape6evm
using DT reference.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Mon, 7 Jul 2014 07:54:33 +0000 (09:54 +0200)]
ARM: shmobile: r8a73a4: Add SCIF nodes
This describes all of the SCIF hardware of the r8a73a4.
Each node is disabled and may be enabled as necessary
by board DTS files.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Mon, 7 Jul 2014 07:54:28 +0000 (09:54 +0200)]
ARM: shmobile: bockw-reference: Initialise SCIF device using DT
Initialise SCIF device using DT when booting bockw
using DT reference.
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Mon, 7 Jul 2014 07:54:27 +0000 (09:54 +0200)]
ARM: shmobile: r8a7778: Add SCIF nodes
This describes all of the SCIF hardware of the r8a7778.
Each node is disabled and may be enabled as necessary
by board DTS files.
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Sat, 12 Jul 2014 13:16:37 +0000 (15:16 +0200)]
Merge branch 'clock-for-v3.17' into dt-for-v3.17
Simon Horman [Mon, 7 Jul 2014 07:54:50 +0000 (09:54 +0200)]
ARM: shmobile: sh73a0: add SCI clock support for DT
This will be used when initialising SCI devices using DT
until common clock framework support is added.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Mon, 7 Jul 2014 07:54:40 +0000 (09:54 +0200)]
ARM: shmobile: r8a7740: correct SCI clock support for DT
When initialising SCI devices their names will be .serial
not .sci.
This will be used when initialising SCI devices using DT
until common clock framework support is added.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Mon, 7 Jul 2014 07:54:32 +0000 (09:54 +0200)]
ARM: shmobile: r8a73a4: add SCI clock support for DT
This will be used when initialising SCI devices using DT
until common clock framework support is added.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Mon, 7 Jul 2014 07:54:26 +0000 (09:54 +0200)]
ARM: shmobile: r8a7778: add SCI clock support for DT
This will be used when initialising SCI devices using DT
until common clock framework support is added.
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Wolfram Sang [Thu, 10 Jul 2014 10:50:56 +0000 (12:50 +0200)]
ARM: shmobile: r8a7790: lager: use iic cores instead of i2c
On Lager board, i2c and iic cores can be interchanged since they can be
muxed to the same wires. Commit
e489c2a9bc82713167d9f721ca764f4b0d37e543
("ARM: shmobile: lager: enable i2c devices") activated the i2c cores,
yet the iic cores should be default since they have the more interesting
features for generic use cases, i.e. SMBUS_QUICK and DMA (yet to be
supported).
Reported-by: Khiem Nguyen <khiem.nguyen.xt@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Khiem Nguyen [Fri, 4 Jul 2014 00:19:51 +0000 (09:19 +0900)]
ARM: shmobile: Lager: Correct I2C bus for VDD MPU regulator
I2C bus for VDD MPU regulator is IIC3, not I2C3.
Signed-off-by: Khiem Nguyen <khiem.nguyen.xt@renesas.com>
Reviewed-by: Wolfram Sang <wsa@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Nicolas Ferre [Wed, 9 Jul 2014 17:14:31 +0000 (19:14 +0200)]
Merge tag 'CCF-for-3.17' of git://github.com/at91linux/linux-at91 into at91-3.17-dt
Pull "CCF migration for 3.17" from Alexandre Belloni:
"This is the switch to CCF for all the remaining at91 SoCs and boards"
Alexandre Belloni [Tue, 24 Jun 2014 06:23:42 +0000 (08:23 +0200)]
ARM: at91/dt: usb_a9263: define crystals frequencies
Define Calao USB-A9263 main and slow crystals frequencies.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Tue, 24 Jun 2014 06:22:51 +0000 (08:22 +0200)]
ARM: at91/dt: tny_a9263: define crystals frequencies
Define Calao TNY-A9263 main and slow crystals frequencies.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Tue, 24 Jun 2014 06:21:46 +0000 (08:21 +0200)]
ARM: at91/dt: sam9263ek: define crystals frequencies
Define at91sam9263ek main and slow crystals frequencies.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Tue, 24 Jun 2014 06:09:44 +0000 (08:09 +0200)]
ARM: at91: move at91sam9263 SoC to the CCF
This patch removes the selection of AT91_USE_OLD_CLK when selecting
at91sam9263 SoC support. This will automatically enable COMMON_CLK_AT91
option and add support for at91 common clock implementation.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Mon, 23 Jun 2014 04:03:37 +0000 (06:03 +0200)]
ARM: at91/dt: sam9263: define clocks
Define the at91sam9263 clocks in the SoC dtsi file.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Thu, 10 Apr 2014 18:19:05 +0000 (20:19 +0200)]
ARM: at91: prepare common clk transition for sam9263
Enclose the sam9263 old clk registration in "#if defined(CONFIG_OLD_CLK_AT91)
#endif"
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Sat, 14 Jun 2014 00:14:32 +0000 (02:14 +0200)]
ARM: at91/dt: cosino define crystals frequencies
Define Cosino boards main and slow crystals frequencies.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Sat, 14 Jun 2014 00:13:16 +0000 (02:13 +0200)]
ARM: at91/dt: pm9g45: crystals frequencies
Define Ronetix pm9g45 main and slow crystals frequencies.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Fri, 13 Jun 2014 18:01:51 +0000 (20:01 +0200)]
ARM: at91/dt: sam9m10g45ek: define crystals frequencies
Define at91sam9m10g45ek main and slow crystals frequencies.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Wed, 11 Jun 2014 20:35:59 +0000 (22:35 +0200)]
ARM: at91: move at91sam9g45 SoC to the CCF
This patch removes the selection of AT91_USE_OLD_CLK when selecting at91sam9g45
SoC support. This will automatically enable COMMON_CLK_AT91 option and add
support for at91 common clock implementation.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Wed, 11 Jun 2014 20:39:06 +0000 (22:39 +0200)]
ARM: at91/dt: sam9g45: define clocks
Define the at91sam9g45 clocks in the SoC dtsi file.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Thu, 10 Apr 2014 18:19:33 +0000 (20:19 +0200)]
ARM: at91: prepare common clk transition for sam9g45
Enclose the sam9g45 old clk registration in "#if defined(CONFIG_OLD_CLK_AT91)
#endif"
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Wed, 18 Jun 2014 19:05:05 +0000 (21:05 +0200)]
ARM: at91/dt: kizbox: define main crystal frequency
Define kizbox board's main crystal frequency.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Wed, 18 Jun 2014 19:13:54 +0000 (21:13 +0200)]
ARM: at91/dt: animeo_ip: define crystals frequencies
Define Somfy Animeo IP main and slow crystals frequencies.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Wed, 18 Jun 2014 19:09:19 +0000 (21:09 +0200)]
ARM: at91/dt: ethernut5: define crystals frequencies
Define egnite Ethernut 5 main and slow crystals frequencies.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Wed, 9 Jul 2014 13:23:05 +0000 (15:23 +0200)]
ARM: at91/dt: evk-pro3: define slow crytal frequency
Define Telit EVK-PRO3 slow crystal frequency
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Wed, 9 Jul 2014 13:22:15 +0000 (15:22 +0200)]
ARM: at91/dt: aks-cdu: define slow crytal frequency
Define AK signal CDU slow crystal frequency
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Wed, 18 Jun 2014 19:07:22 +0000 (21:07 +0200)]
ARM: at91/dt: ge863-pro3: define main crystal frequency
Define Telit GE863-PRO3 main crystal frequency.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Wed, 18 Jun 2014 19:03:19 +0000 (21:03 +0200)]
ARM: at91/dt: mpa1600: define crytals frequencies
Define Phontech MPA 1600 main and slow crystals frequencies.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Wed, 18 Jun 2014 19:12:26 +0000 (21:12 +0200)]
ARM: at91/dt: qil_a9260: define crystals frequencies
Define Calao QIL-A9260 main and slow crystals frequencies.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Wed, 18 Jun 2014 19:01:51 +0000 (21:01 +0200)]
ARM: at91/dt: tny_a9260: define crystals frequencies
Define Calao TNY-A9260 and TNY-A9G20 main and slow crystals frequencies.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Mon, 16 Jun 2014 18:12:19 +0000 (20:12 +0200)]
ARM: at91/dt: usb_a9260: define crystals frequencies
Define Calao USB-A9260, USB-A9G20 and USB-A9G20-LPW main and slow crystals
frequencies.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Tue, 17 Jun 2014 09:12:11 +0000 (11:12 +0200)]
ARM: at91/dt: foxg20: define crystals frequencies
Define Acme Systems srl Fox G20 main and slow crystals frequencies.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Wed, 18 Jun 2014 19:10:25 +0000 (21:10 +0200)]
ARM: at91/dt: at91sam9g20ek: define crystals frequencies
Define at91sam9g20ek main and slow crystals frequencies.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Thu, 29 May 2014 18:42:30 +0000 (20:42 +0200)]
ARM: at91: move at91sam9260 SoCs to the CCF
This patch removes the selection of AT91_USE_OLD_CLK when selecting at91sam9260
SoCs support. This will automatically enable COMMON_CLK_AT91 option and add
support for at91 common clk implementation.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Mon, 16 Jun 2014 17:22:40 +0000 (19:22 +0200)]
ARM: at91/dt: sam9g20: define clocks
Define the at91sam9g20 clocks that differ from at91sam9260 in the SoC dtsi file.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Fri, 18 Apr 2014 10:44:20 +0000 (12:44 +0200)]
ARM: at91/dt: sam9260: define clocks
Define the at91sam9260 clocks in the SoC dtsi file.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Thu, 10 Apr 2014 18:18:47 +0000 (20:18 +0200)]
ARM: at91: prepare common clk transition for sam9260
Enclose the sam9260 old clk registration in "#if defined(CONFIG_OLD_CLK_AT91)
#endif"
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Wed, 18 Jun 2014 19:11:37 +0000 (21:11 +0200)]
ARM: at91/dt: at91rm9200ek: define crystals frequencies
Define at91rm9200ek main and slow crystals frequencies.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Thu, 29 May 2014 18:44:44 +0000 (20:44 +0200)]
ARM: at91: move at91rm9200 SoC to the CCF
This patch removes the selection of AT91_USE_OLD_CLK when selecting at91rm9200
SoC support. This will automatically enable COMMON_CLK_AT91 option and add
support for at91 common clk implementation.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Fri, 2 May 2014 22:46:36 +0000 (00:46 +0200)]
ARM: at91/dt: rm9200: define clocks
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Thu, 10 Apr 2014 18:18:19 +0000 (20:18 +0200)]
ARM: at91: prepare common clk transition for rm9200
Enclose the rm9200 old clk registration in "#if defined(CONFIG_OLD_CLK_AT91)
#endif"
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Sat, 14 Jun 2014 00:18:24 +0000 (02:18 +0200)]
ARM: at91/dt: ariag25: define crystals frequencies
Define Acme Systems Aria G25 board main and slow crystals frequencies.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Tue, 1 Jul 2014 13:44:01 +0000 (15:44 +0200)]
Documentation: dt: document all the atmel pmc compatibles
Documentation for atmel-pmc only list one compatible, add the remaining
compatible strings.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Nicolas Ferre [Thu, 15 May 2014 15:09:28 +0000 (17:09 +0200)]
ARM: at91/dt: add NAND + DMA property for at91sam9rl
Add the "atmel,nand-has-dma" property to NAND node
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Nicolas Ferre [Thu, 15 May 2014 15:08:32 +0000 (17:08 +0200)]
ARM: at91/dt: add DMA controller node to at91sam9rl
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Bo Shen [Mon, 9 Jun 2014 03:31:47 +0000 (11:31 +0800)]
ARM: at91: at91sam9n12ek: switch sound to CCF
As the at91sam9n12ek has switch to CCF, so add clock for wm8904
Signed-off-by: Bo Shen <voice.shen@atmel.com>
Reviwed-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Bo Shen [Mon, 9 Jun 2014 03:31:46 +0000 (11:31 +0800)]
ARM: at91: sama5d3xek: switch sound to CCF
As the sama5d3xek board has switch to CCF, so add clock for wm8904
Signed-off-by: Bo Shen <voice.shen@atmel.com>
Reviwed-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Tue, 17 Jun 2014 13:30:20 +0000 (15:30 +0200)]
ARM: at91/dt: sama5d3 crystals under the clocks node
Having clocks grouped in a subnode is common practice, so move the crystals
under a clocks node for the sama5d3 SoC and sama5d3 based boards.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Tue, 17 Jun 2014 13:30:19 +0000 (15:30 +0200)]
ARM: at91/dt: sam9x5 crystals under the clocks node
Having clocks grouped in a subnode is common practice, so move the crystals and
the ADC clock under a clocks node for the at91sam9x5 SoC and at91sam9x5 based
boards.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Tue, 17 Jun 2014 13:30:19 +0000 (15:30 +0200)]
ARM: at91/dt: sam9rl crystals under the clocks node
Having clocks grouped in a subnode is common practice, so move the crystals
under a clocks node for the at91sam9rl SoC and at91sam9rl based boards.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Tue, 17 Jun 2014 13:30:18 +0000 (15:30 +0200)]
ARM: at91/dt: sam9n12 crystals under the clocks node
Having clocks grouped in a subnode is common practice, so move the crystals
under a clocks node for the at91sam9n12 SoC and at91sam9n12 based boards.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Tue, 17 Jun 2014 13:30:18 +0000 (15:30 +0200)]
ARM: at91/dt: sam9261 crystals under the clocks node
Having clocks grouped in a subnode is common practice, so move the crystals
under a clocks node for the at91sam9261 SoC and at91sam9261 based boards.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Tony Lindgren [Wed, 9 Jul 2014 11:58:54 +0000 (04:58 -0700)]
Merge branch 'for-v3.17/omap2-use-dt-clks' of github.com/t-kristo/linux-pm into omap-for-v3.17/dt
Roger Quadros [Mon, 30 Jun 2014 11:00:38 +0000 (14:00 +0300)]
ARM: dts: dra7-evm: Add regulator information to USB2 PHYs
The ldousb_reg regulator provides power to the USB1 and USB2
High Speed PHYs.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Keerthy [Wed, 9 Jul 2014 05:36:33 +0000 (11:06 +0530)]
ARM: omap2plus_defconfig: enable TPS65218 configs
Enable TPS65218 config options.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Keerthy [Wed, 9 Jul 2014 05:36:32 +0000 (11:06 +0530)]
ARM: dts: AM437x: Add TPS65218 device tree nodes
Add TPS65218 device tree nodes. i2c clock frequency setting
also added as part of tps65218 nodes addition. As i2c clock
enabling is required.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Keerthy [Wed, 9 Jul 2014 05:36:31 +0000 (11:06 +0530)]
ARM: dts: AM437x: Fix i2c nodes indentation
Fix i2c nodes indentation.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Keerthy [Wed, 9 Jul 2014 05:36:30 +0000 (11:06 +0530)]
ARM: dts: AM43x: Add TPS65218 device tree nodes
Add TPS65218 device tree nodes. i2c clock frequency setting
also added as part of tps65218 nodes addition. As i2c clock
enabling is required.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Ash Charles [Tue, 10 Jun 2014 22:22:00 +0000 (15:22 -0700)]
ARM: dts: Add devicetree for Gumstix Pepper board
This adds the Gumstix Pepper[1] single-board computer based on the
TI AM335x processor. Schematics are available [2].
[1] https://store.gumstix.com/index.php/products/344/
[2] https://pubs.gumstix.com/boards/PEPPER/
Signed-off-by: Ash Charles <ashcharles@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Wed, 9 Jul 2014 11:02:09 +0000 (04:02 -0700)]
Merge branch 'dts-crossbar' into omap-for-v3.17/dt
R Sricharan [Thu, 26 Jun 2014 07:25:31 +0000 (12:55 +0530)]
ARM: dts: dra7: add crossbar device binding
There is a IRQ crossbar device in the soc, which
maps the irq requests from the peripherals to the
mpu interrupt controller's inputs. The Peripheral irq
requests are connected to only one crossbar
input and the output of the crossbar is connected to only one
controller's input line. The crossbar device is used to map
a peripheral input to a free mpu's interrupt controller line.
Here, adding a new crossbar device node and replacing all the peripheral
interrupt numbers with its fixed crossbar input lines.
Signed-off-by: Sricharan R <r.sricharan@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Cc: Benoit Cousson <bcousson@baylibre.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
R Sricharan [Thu, 26 Jun 2014 07:25:30 +0000 (12:55 +0530)]
ARM: dts: dra7: add routable-irqs property for gic node
There is a IRQ crossbar device in the soc, which maps the
irq requests from the peripherals to the mpu interrupt
controller's inputs. The gic provides the support for such
IPs in the form of routable-irqs. So adding the property
here to gic node.
Signed-off-by: Sricharan R <r.sricharan@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Cc: Benoit Cousson <bcousson@baylibre.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Simon Horman [Mon, 7 Jul 2014 06:50:09 +0000 (08:50 +0200)]
ARM: shmobile: kzm9g-reference: Remove early_printk from command line
As early printk is not supported when devices are initialised
using DT, so remove it from the command line.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Mon, 7 Jul 2014 06:50:08 +0000 (08:50 +0200)]
ARM: shmobile: armadillo800eva-reference: Remove early_printk from command line
As early printk is not supported when devices are initialised
using DT, so remove it from the command line.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Mon, 7 Jul 2014 06:47:38 +0000 (08:47 +0200)]
ARM: shmobile: r8a7779: Consistently use tabs for indentation
Unify white space usage by consistently using tabs for indentation.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Mon, 7 Jul 2014 06:47:36 +0000 (08:47 +0200)]
ARM: shmobile: henninger: Consistently use tabs for indentation
Unify white space usage by consistently using tabs for indentation.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Grygorii Strashko [Tue, 8 Jul 2014 16:23:42 +0000 (12:23 -0400)]
ARM: dts: keystone: fix netcp's clocks definitions
The clocks tree for Keystone 2 NTCP devices should be
defined as following:
[refclk] - board dependent
|- <papllclk> - PLL clock
|- <paclk13> - fixed factor clock div=3 mul=1
|- <clkpa> - gated clock
|- <clkcpgmac> - gated clock
|- <clksa> - gated clock
Hence, update Keystone 2 DT to follow HW specification.
Signed-off-by: WingMan Kwok <w-kwok2@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Sergei Shtylyov [Tue, 24 Jun 2014 18:13:38 +0000 (22:13 +0400)]
ARM: shmobile: henninger: enable internal PCI
Enable internal AHB-PCI bridges for the USB EHCI/OHCI controllers attached to
them.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
[horms+renesas@verge.net.au: minor witespace changes]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Sergei Shtylyov [Tue, 24 Jun 2014 18:11:44 +0000 (22:11 +0400)]
ARM: shmobile: koelsch: enable internal PCI
Enable internal AHB-PCI bridges for the USB EHCI/OHCI controllers attached to
them.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
[horms+renesas@verge.net.au: minor witespace changes]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Sergei Shtylyov [Tue, 24 Jun 2014 18:10:05 +0000 (22:10 +0400)]
ARM: shmobile: r8a7791: add internal PCI bridge nodes
Add device nodes for the R8A7791 internal PCI bridge devices.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
[horms+renesas@verge.net.au: minor witespace changes]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Olof Johansson [Tue, 8 Jul 2014 05:39:47 +0000 (22:39 -0700)]
Merge tag 'berlin-dt-3.17-1' of git://git.infradead.org/users/hesselba/linux-berlin into next/dt
Merge "Berlin DT changes for v3.17" from Sebastian Hesselbarth:
- L2CC latency properties for BG2Q
- DW i2c nodes for BG2Q and corresponding dev board
- SMP related nodes for BG2 and BG2Q
* tag 'berlin-dt-3.17-1' of git://git.infradead.org/users/hesselba/linux-berlin:
ARM: dts: berlin: add SMP related nodes and properties for BG2Q
ARM: dts: berlin: add SMP related nodes and properties for BG2
Documentation: bindings: add the marvell,berlin-smp CPU enable method
Documentation: bindings: add the Berlin CPU control doc
ARM: dts: berlin: enable i2c0 and i2c2
ARM: dts: berlin: add I2C nodes for BG2Q
ARM: dts: berlin2q: set L2CC tag and data latency to 2 cycles
Signed-off-by: Olof Johansson <olof@lixom.net>
Linus Walleij [Sat, 12 Apr 2014 15:13:23 +0000 (17:13 +0200)]
ARM: ux500: add misc sensors to the device trees
This adds the STMicroelectonics MEMS sensor devices to the Ux500
family device trees:
- Accelerometer
- Magnetometer
- Gyroscope
- Pressure (barometer)
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Denis CIOCCA <denis.ciocca@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Linus Walleij [Wed, 11 Jun 2014 08:45:50 +0000 (10:45 +0200)]
ARM: ux500: add some DB8500 DMA channel info
This adds some missing DMA channel information to the disabled
MMC/SD/SDIO blocks number 3 and 5, and notes that the assignment
of MSP channels vary with ASIC variant.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This page took 0.045795 seconds and 5 git commands to generate.