Laurent Pinchart [Wed, 13 Mar 2013 02:23:50 +0000 (03:23 +0100)]
ARM: shmobile: kzm9g: Register pinctrl mappings for USB
Replace the GPIO-based USB pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 13 Mar 2013 02:21:36 +0000 (03:21 +0100)]
ARM: shmobile: kzm9g: Register pinctrl mappings for BSC
Replace the GPIO-based BSC pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 13 Mar 2013 02:23:50 +0000 (03:23 +0100)]
ARM: shmobile: kzm9g: Register pinctrl mappings for SDHI and MMCIF
Replace the GPIO-based SDHI and MMCIF pinmux configuration by pinctrl
mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 3 Jan 2013 11:54:28 +0000 (12:54 +0100)]
ARM: shmobile: kzm9g: Register pinctrl mappings for FSI
Replace the GPIO-based FSI pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 3 Jan 2013 11:54:28 +0000 (12:54 +0100)]
ARM: shmobile: kzm9g: Register pinctrl mappings for I2C
Replace the GPIO-based I2C pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 3 Jan 2013 11:54:28 +0000 (12:54 +0100)]
ARM: shmobile: kzm9g: Register pinctrl mappings for SCIF
Replace the GPIO-based SCIF pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 3 Jan 2013 11:54:28 +0000 (12:54 +0100)]
ARM: shmobile: kzm9g: Register pinctrl mappings for LCD
Replace the GPIO-based LCD pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Wed, 13 Mar 2013 02:52:31 +0000 (03:52 +0100)]
ARM: shmobile: kota2: Register pinctrl mappings for BSC
Replace the GPIO-based BSC pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 13 Mar 2013 02:52:31 +0000 (03:52 +0100)]
ARM: shmobile: kota2: Register pinctrl mappings for KEYSC
Replace the GPIO-based KEYSC pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 13 Mar 2013 02:52:31 +0000 (03:52 +0100)]
ARM: shmobile: kota2: Register pinctrl mappings for SDHI and MMCIF
Replace the GPIO-based SDHI and MMCIF pinmux configuration by pinctrl
mappings.
Board code used the non-pulled-up version of the function GPIOs, but
those are defined in the PFC driver as enabling the pull-ups anyway.
Enable pull-ups on the MMCIF data and command pins through the pinconf
API.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 3 Jan 2013 11:54:28 +0000 (12:54 +0100)]
ARM: shmobile: kota2: Register pinctrl mappings for SCIF
Replace the GPIO-based SCIF pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 3 Jan 2013 11:54:28 +0000 (12:54 +0100)]
ARM: shmobile: bonito: Register pinctrl mappings for LCDC0
Replace the GPIO-based LCDC0 pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 6 Mar 2013 13:34:23 +0000 (14:34 +0100)]
ARM: shmobile: armadillo800eva: Register pinctrl mappings for SDHI and MMCIF
Replace the GPIO-based SDHI and MMCIF pinmux configuration by pinctrl
mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 3 Jan 2013 11:54:28 +0000 (12:54 +0100)]
ARM: shmobile: armadillo800eva: Register pinctrl mappings for LCDC0
Replace the GPIO-based LCDC0 pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Wed, 6 Mar 2013 13:21:27 +0000 (14:21 +0100)]
ARM: shmobile: ap4evb: Register pinctrl mappings for SDHI and MMCIF
Replace the GPIO-based SDHI and MMCIF pinmux configuration by pinctrl
mappings
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 13 Mar 2013 02:52:31 +0000 (03:52 +0100)]
ARM: shmobile: ag5evm: Register pinctrl mappings for IrDA
Replace the GPIO-based IrDA pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 13 Mar 2013 02:52:31 +0000 (03:52 +0100)]
ARM: shmobile: ag5evm: Register pinctrl mappings for KEYSC
Replace the GPIO-based KEYSC pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 13 Mar 2013 02:52:31 +0000 (03:52 +0100)]
ARM: shmobile: ag5evm: Register pinctrl mappings for SDHI and MMCIF
Replace the GPIO-based SDHI and MMCIF pinmux configuration by pinctrl
mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 3 Jan 2013 11:54:28 +0000 (12:54 +0100)]
ARM: shmobile: ag5evm: Register pinctrl mappings for FSI
Replace the GPIO-based FSI pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 3 Jan 2013 11:54:28 +0000 (12:54 +0100)]
ARM: shmobile: ag5evm: Register pinctrl mappings for I2C
Replace the GPIO-based I2C pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 3 Jan 2013 11:54:28 +0000 (12:54 +0100)]
ARM: shmobile: ag5evm: Register pinctrl mappings for SCIF
Replace the GPIO-based SCIF pinmux configuration by pinctrl mappings.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 7 Mar 2013 12:38:51 +0000 (13:38 +0100)]
sh-pfc: r8a7779: Add INTC pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 7 Mar 2013 12:38:51 +0000 (13:38 +0100)]
sh-pfc: r8a7779: Add LBSC pin groups and functions
Only the CS pins and functions are currently handled.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 7 Mar 2013 12:38:51 +0000 (13:38 +0100)]
sh-pfc: r8a7779: Add USB pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 7 Mar 2013 12:36:36 +0000 (13:36 +0100)]
sh-pfc: r8a7779: Add USB0 and USB1 PENC pinmux support
The USB0 and USB1 PENC functions were missing. Add them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Wed, 6 Mar 2013 18:04:43 +0000 (19:04 +0100)]
sh-pfc: r8a7779: Add HSPI pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Wed, 6 Mar 2013 18:04:43 +0000 (19:04 +0100)]
sh-pfc: r8a7779: Add SCIF pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Wed, 6 Mar 2013 18:04:43 +0000 (19:04 +0100)]
sh-pfc: r8a7779: Add SDHI and MMCIF pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 3 Jan 2013 12:07:05 +0000 (13:07 +0100)]
sh-pfc: r8a7779: Add DU pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Guennadi Liakhovetski [Wed, 23 Jan 2013 16:37:44 +0000 (17:37 +0100)]
sh-pfc: r8a7740: Add SDHI and MMCIF pin groups and functions
Add pin groups for the first two SDHI interfaces and two alternative pin
groups for the MMCIF interface on the r8a7740 SoC.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 3 Jan 2013 12:07:05 +0000 (13:07 +0100)]
sh-pfc: r8a7740: Add LCDC0 and LCDC1 pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Tue, 12 Mar 2013 00:55:08 +0000 (01:55 +0100)]
sh-pfc: sh73a0: Add IrDA pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Tue, 12 Mar 2013 00:55:08 +0000 (01:55 +0100)]
sh-pfc: sh73a0: Add USB pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Tue, 12 Mar 2013 00:55:08 +0000 (01:55 +0100)]
sh-pfc: sh73a0: Add BSC pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Tue, 12 Mar 2013 00:55:08 +0000 (01:55 +0100)]
sh-pfc: sh73a0: Add KEYSC pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Guennadi Liakhovetski [Tue, 12 Feb 2013 15:50:03 +0000 (16:50 +0100)]
sh-pfc: sh73a0: Add SDHI and MMCIF pin groups and functions
Add pin group definitions for SDHI0, SDHI1, SDHI2 and MMCIF interfaces on
sh73a0.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 3 Jan 2013 12:07:05 +0000 (13:07 +0100)]
sh-pfc: sh73a0: Add FSI pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 3 Jan 2013 12:07:05 +0000 (13:07 +0100)]
sh-pfc: sh73a0: Add I2C2 and I2C3 pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 3 Jan 2013 12:07:05 +0000 (13:07 +0100)]
sh-pfc: sh73a0: Add SCIFA and SCIFB pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 3 Jan 2013 12:07:05 +0000 (13:07 +0100)]
sh-pfc: sh73a0: Add LCD and LCD2 pin groups and functions
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Wed, 13 Mar 2013 00:31:23 +0000 (01:31 +0100)]
sh-pfc: sh73a0: Add bias (pull-up/down) pinconf support
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Guennadi Liakhovetski [Wed, 23 Jan 2013 16:37:45 +0000 (17:37 +0100)]
sh-pfc: sh7372: Add SDHCI and MMCIF pin groups and functions
Add pin groups for all three SDHI interfaces and two alternative pin
groups for the MMCIF interface on the sh7372 SoC.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 13 Mar 2013 17:18:30 +0000 (18:18 +0100)]
sh-pfc: Return an error if a pin doesn't support the requested direction
When setting a pin direction verify that the requested direction is
supported, and return an error if it isn't.
This requires pin configuration information to be supplied by SoC data.
The check is a no-op if the information is not supplied.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Sun, 10 Mar 2013 17:00:02 +0000 (18:00 +0100)]
sh-pfc: Convert message printing from pr_* to dev_*
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Sun, 10 Mar 2013 16:25:29 +0000 (17:25 +0100)]
sh-pfc: Clean up pin configuration type handling
Set pin configuration type to
- PINMUX_TYPE_NONE at initialization time and when disabling a function
or freeing a GPIO
- PINMUX_TYPE_FUNCTION when enabling a function
- PINMUX_TYPE_INPUT or PINMUX_TYPE_OUTPUT when setting the GPIO
direction
Verify that the type is PINMUX_TYPE_NONE when enabling a function or
requesting a GPIO and return -EBUSY if it isn't.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Sun, 10 Mar 2013 15:55:19 +0000 (16:55 +0100)]
sh-pfc: Merge sh_pfc_reconfig_pin() into sh_pfc_gpio_set_direction()
The sh_pfc_reconfig_pin() is only called from a single location. Merge
it into its call site to make the code easier to follow.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Sun, 10 Mar 2013 15:44:02 +0000 (16:44 +0100)]
sh-pfc: Implement generic pinconf support
The existing PFC pinconf implementation, tied to the PFC-specific pin
types, isn't used by drivers or boards. Replace it with the generic
pinconf types to implement bias (pull-up/down) setup. Other pin
configuration options can be implemented later if needed.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Sun, 10 Mar 2013 15:38:23 +0000 (16:38 +0100)]
sh-pfc: Use proper error codes
Return proper error codes instead of -1, and propagate the error codes.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Sat, 16 Feb 2013 17:47:05 +0000 (18:47 +0100)]
sh-pfc: Constify all SoC data
None of the SoC data need to be modified. Constify it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Sun, 10 Mar 2013 14:29:14 +0000 (15:29 +0100)]
sh-pfc: Remove configuration dry-run and free
The purpose of the dry-run is to ensure that a pin about to be
configured isn't in use. However, the current implementation is a no-op.
This proves that the dry-run isn't essential. Remove it.
Freeing configuration then becomes a no-op as well. Remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Fri, 8 Mar 2013 16:43:54 +0000 (17:43 +0100)]
sh-pfc: Don't modify sh_pfc_pin SoC data
The sh_pfc_pin structure supplied in SoC data contains information about
pin configuration and name. It's abused to store GPIO data registers
information and pin config type. Move those fields out of the
pinmux_data_reg structure into the new sh_pfc_gpio_pin and
sh_pfc_pin_config structures.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Sat, 16 Feb 2013 17:34:32 +0000 (18:34 +0100)]
sh-pfc: Don't modify pinmux_data_reg SoC data
The pinmux_data_reg structure supplied in SoC data contains information
about data registers. It's abused to store per-device mapped iomem and
shadow values. Move those fields out of the pinmux_data_reg structure
into the per-device sh_pfc_chip structure.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Sat, 16 Feb 2013 22:39:07 +0000 (23:39 +0100)]
sh-pfc: Drop unused support for 1:1 physical to virtual memory mappings
Now that all PFC platform devices provide memory resources support for
registers without an associated memory resource isn't used anymore. Drop
it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Sat, 16 Feb 2013 23:26:33 +0000 (00:26 +0100)]
sh-pfc: Don't map data registers individually
All data registers are located in the same memory resource. Locate the
mapped resource at initializat time and use it directly instead of
computing a mapped address for each register. This gets rid of the
mapped_reg field of the pinmux_data_reg structure.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Fri, 15 Feb 2013 01:04:55 +0000 (02:04 +0100)]
sh-pfc: Move GPIO registers access functions to gpio.c
Move the sh_pfc_setup_data_regs(), sh_pfc_setup_data_reg(),
sh_pfc_get_data_reg(), sh_pfc_read_bit() and sh_pfc_write_bit()
function to gpio.c as they belong to the GPIO implementation. Inline
sh_pfc_read_bit() and sh_pfc_write_bit() in their only call location.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Wei Yongjun [Mon, 11 Mar 2013 14:08:12 +0000 (22:08 +0800)]
sh-pfc: Fix return value check in sh_pfc_register_pinctrl()
In case of error, the function pinctrl_register() returns NULL not
ERR_PTR(). The IS_ERR() test in the return value check should be
replaced with NULL test.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Sat, 16 Feb 2013 18:23:58 +0000 (19:23 +0100)]
sh: shx3: Add pin control resources
Add memory resources for the pin control platform device to let the
sh-pfc driver ioremap() registers properly instead of evily casting
register physical addresses to virtual addresses.
The memory resource address range has been extracted from the config and
data registes lists in the sh-pfc driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Sat, 16 Feb 2013 18:23:58 +0000 (19:23 +0100)]
sh: sh7786: Add pin control resources
Add memory resources for the pin control platform device to let the
sh-pfc driver ioremap() registers properly instead of evily casting
register physical addresses to virtual addresses.
The memory resource address range has been extracted from the config and
data registes lists in the sh-pfc driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Sat, 16 Feb 2013 18:23:58 +0000 (19:23 +0100)]
sh: sh7785: Add pin control resources
Add memory resources for the pin control platform device to let the
sh-pfc driver ioremap() registers properly instead of evily casting
register physical addresses to virtual addresses.
The memory resource address range has been extracted from the config and
data registes lists in the sh-pfc driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Sat, 16 Feb 2013 18:23:58 +0000 (19:23 +0100)]
sh: sh7757: Add pin control resources
Add memory resources for the pin control platform device to let the
sh-pfc driver ioremap() registers properly instead of evily casting
register physical addresses to virtual addresses.
The memory resource address range has been extracted from the config and
data registes lists in the sh-pfc driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Sat, 16 Feb 2013 18:23:58 +0000 (19:23 +0100)]
sh: sh7724: Add pin control resources
Add memory resources for the pin control platform device to let the
sh-pfc driver ioremap() registers properly instead of evily casting
register physical addresses to virtual addresses.
The memory resource address range has been extracted from the config and
data registes lists in the sh-pfc driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Sat, 16 Feb 2013 18:23:58 +0000 (19:23 +0100)]
sh: sh7723: Add pin control resources
Add memory resources for the pin control platform device to let the
sh-pfc driver ioremap() registers properly instead of evily casting
register physical addresses to virtual addresses.
The memory resource address range has been extracted from the config and
data registes lists in the sh-pfc driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Sat, 16 Feb 2013 18:23:58 +0000 (19:23 +0100)]
sh: sh7722: Add pin control resources
Add memory resources for the pin control platform device to let the
sh-pfc driver ioremap() registers properly instead of evily casting
register physical addresses to virtual addresses.
The memory resource address range has been extracted from the config and
data registes lists in the sh-pfc driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Sat, 16 Feb 2013 18:23:58 +0000 (19:23 +0100)]
sh: sh7720: Add pin control resources
Add memory resources for the pin control platform device to let the
sh-pfc driver ioremap() registers properly instead of evily casting
register physical addresses to virtual addresses.
The memory resource address range has been extracted from the config and
data registes lists in the sh-pfc driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Sat, 16 Feb 2013 18:23:58 +0000 (19:23 +0100)]
sh: sh7269: Add pin control resources
Add memory resources for the pin control platform device to let the
sh-pfc driver ioremap() registers properly instead of evily casting
register physical addresses to virtual addresses.
The memory resource address range has been extracted from the config and
data registes lists in the sh-pfc driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Sat, 16 Feb 2013 18:23:58 +0000 (19:23 +0100)]
sh: sh7264: Add pin control resources
Add memory resources for the pin control platform device to let the
sh-pfc driver ioremap() registers properly instead of evily casting
register physical addresses to virtual addresses.
The memory resource address range has been extracted from the config and
data registes lists in the sh-pfc driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Sat, 16 Feb 2013 18:23:58 +0000 (19:23 +0100)]
sh: sh7203: Add pin control resources
Add memory resources for the pin control platform device to let the
sh-pfc driver ioremap() registers properly instead of evily casting
register physical addresses to virtual addresses.
The memory resource address range has been extracted from the config and
data registes lists in the sh-pfc driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 3 Jan 2013 13:33:13 +0000 (14:33 +0100)]
sh-pfc: Expose real groups and functions in pinctrl/pinmux operations
The sh-pfc driver exposes one fake group and function per GPIO pin. As
the pinctrl and pinmux APIs are not used by any SuperH and SH Mobile
board or driver, drop the fake groups and functions and replace them by
a real pinctrl and pinmux implementation.
Groups and functions must now be explicitly provided by PFC SoC-specific
data.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Sat, 16 Feb 2013 06:38:50 +0000 (07:38 +0100)]
ARM: shmobile: mackerel: Replace GPIO_PORTx enum with GPIO port numbers
The PFC GPIO API implementation moved to using port numbers. Replace all
GPIO_PORTx enum usage with the corresponding port number. The GPIO_PORTx
enum values are identical to the port number on this platform.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Sat, 16 Feb 2013 06:38:50 +0000 (07:38 +0100)]
ARM: shmobile: bonito: Replace GPIO_PORTx enum with GPIO port numbers
The PFC GPIO API implementation moved to using port numbers. Replace all
GPIO_PORTx enum usage with the corresponding port number. The GPIO_PORTx
enum values are identical to the port number on this platform.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Sat, 16 Feb 2013 06:38:50 +0000 (07:38 +0100)]
ARM: shmobile: armadillo: Replace GPIO_PORTx enum with GPIO port numbers
The PFC GPIO API implementation moved to using port numbers. Replace all
GPIO_PORTx enum usage with the corresponding port number. The GPIO_PORTx
enum values are identical to the port number on this platform.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Sat, 16 Feb 2013 06:38:50 +0000 (07:38 +0100)]
ARM: shmobile: ap4-evb: Replace GPIO_PORTx enum with GPIO port numbers
The PFC GPIO API implementation moved to using port numbers. Replace all
GPIO_PORTx enum usage with the corresponding port number. The GPIO_PORTx
enum values are identical to the port number on this platform.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Guennadi Liakhovetski [Tue, 12 Feb 2013 15:50:02 +0000 (16:50 +0100)]
ARM: shmobile: sh73a0: Support sparse GPIO numbers
The SH73A0 SoC has sparse GPIO numbers. Declare the pin numbers ranges
in the PFC SoC data and use the pin numbers in the GPIO API.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Fri, 15 Feb 2013 00:33:38 +0000 (01:33 +0100)]
sh-pfc: Add support for sparse pin numbers
The PFC driver assumes that the value of the GPIO_PORTxxx enumeration
names are equal to the port number. This isn't true when the port number
space is sparse, as with the SH73A0.
Fix the issue by adding support for pin numbers ranges specified through
SoC data. When no range is specified the driver considers that the PFC
implements a single contiguous range for all pins.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 7 Mar 2013 23:45:12 +0000 (00:45 +0100)]
sh-pfc: Replace pinctrl_add_gpio_range() with gpiochip_add_pin_range()
Adding a GPIO range to a pinctrl device logically belongs to the GPIO
driver. Switch to the right API.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 14 Feb 2013 21:35:09 +0000 (22:35 +0100)]
sh-pfc: Add function to retrieve a pin instance from its pin number
This prepares support for sparse pin numbering. The function currently
just performs and indexed lookup in the pins array.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 14 Feb 2013 21:12:11 +0000 (22:12 +0100)]
sh-pfc: Simplify the sh_pfc_gpio_is_pin() logic
The function is guaranteed to be called with a gpio number smaller than
nr_pins. The condition can the be simplified, and the function inlined.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 14 Feb 2013 16:36:56 +0000 (17:36 +0100)]
sh-pfc: Use pinmux identifiers in the pin muxing API
The PFC core exposes a sh_pfc_config_gpio() function that configures
pinmuxing for a given GPIO (either a real GPIO or a function GPIO).
Handling of real and function GPIOs belong to the GPIO layer, move the
GPIO number to mark translation to the caller and rename the function to
sh_pfc_config_mux().
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Wed, 13 Feb 2013 21:09:27 +0000 (22:09 +0100)]
sh-pfc: Share the PORT_10_REV, PORT_32 and PORT_32_REV definitions
The macros are defined identically and used in two SoC-specific files,
share them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 3 Jan 2013 13:12:14 +0000 (14:12 +0100)]
sh-pfc: Look up IRQ table entries by GPIO number
Instead of converting the GPIO number to an enum_id and looking up IRQ
table entries by enum_id, replace the pinmux_irq enum_ids field with a
gpios field and lookup entries using the GPIO number.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Wed, 2 Jan 2013 13:53:37 +0000 (14:53 +0100)]
sh-pfc: Rename struct pinmux_pin to struct sh_pfc_pin
And drop the pinmux_flag_t typedef.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 6 Dec 2012 13:49:25 +0000 (14:49 +0100)]
sh-pfc: Split pins and functions into separate gpio_chip instances
Register two GPIO chips, one for the real GPIOs and one for the function
GPIOs.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 29 Nov 2012 12:24:07 +0000 (13:24 +0100)]
sh-pfc: Split pins and functions definition tables
Split the GPIOs table into a pins table for real GPIOs and a functions
table for function GPIOs.
Only register pins with the pinctrl core. The function GPIOs remain
accessible as GPIOs.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 29 Nov 2012 17:00:32 +0000 (18:00 +0100)]
sh-pfc: Don't needlessly check GPIO type in sh_gpio_free()
The GPIO type is always PINMUX_TYPE_FUNCTION when freeing a function
GPIO. Hardcode the type value.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 29 Nov 2012 12:03:53 +0000 (13:03 +0100)]
sh-pfc: Shrink the pinctrl GPIO range to include real GPIOs only
As a step towards GPIO function removal, shorten the GPIO range
registered with the pinctrl core. Function GPIOs are now handled in the
GPIO handlers directly instead of going through the pinctrl API.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Wed, 28 Nov 2012 18:22:18 +0000 (19:22 +0100)]
sh-pfc: Make struct pinmux_gpio enum_id field const
This ensures that the field is not modified, which is a prerequisite for
the rest of the PFC refactoring work.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 29 Nov 2012 01:23:26 +0000 (02:23 +0100)]
sh-pfc: Initialize pinmux_gpio flags statically
All function GPIO entries are initialized with the GPIO_FN macro that
expands to the PINMUX_GPIO macro, used to initialize real GPIOs. Create
a PINMUX_GPIO_FN macro that duplicates PINMUX_GPIO and sets flags to
PINMUX_TYPE_FUNCTION and use it in GPIO_FN, and make PINMUX_GPIO set
flags to PINMUX_TYPE_GPIO.
This removes the need to initialize GPIO flags at runtime and thus
simplifies the code, preparing for the GPIO and functions split.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 29 Nov 2012 15:18:24 +0000 (16:18 +0100)]
sh-pfc: Remove unused sh_pfc_soc_info reserved_id field
The field is unused, remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Thu, 29 Nov 2012 11:24:51 +0000 (12:24 +0100)]
sh-pfc: Replace SoC info data and mark ranges with a number of pins
The data and mark ranges are only used to check whether a GPIO
corresponds to a real pin or a function. As pins come first in the list
of GPIOs and in the platform-specific GPIO enumerations, we can replace
the data and mark ranges by a number of pins.
Add an nr_pins field to struct sh_pfc_soc_info to store the number of
pins implemented by the SoC, remove the data and mark range fields and
introduce sh_pfc_gpio_is_pin() and sh_pfc_gpio_is_function() functions
to replace range-based checks.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Wed, 28 Nov 2012 16:51:00 +0000 (17:51 +0100)]
sh-pfc: Replace first_gpio and last_gpio with nr_gpios
The SoC information first_gpio field is always equal to 0, and the
last_gpio field is the index of the last entry in the pinmux_gpios
array. Replace the first_gpio and last_gpio fields by a nr_gpios field,
and initialize it to ARRAY_SIZE(pinmux_gpios).
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Wed, 28 Nov 2012 21:05:49 +0000 (22:05 +0100)]
sh-pfc: Use GPIO_FN instead of PINMUX_GPIO where possible
The GPIO_FN macro expands to the PINMUX_GPIO macro. The regular
expression to 'unexpand' PINMUX_GPIO to GPIO_FN is
s/\tPINMUX_GPIO(GPIO_FN_\([A-Z0-9_]*\),[ \t]*\1_MARK)/\tGPIO_FN(\1)/
This consolidates SoC-specific PFC information to use the same macros
for all SoCs.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Wed, 28 Nov 2012 19:56:48 +0000 (20:56 +0100)]
sh-pfc: Don't take the sh_pfc spinlock in sh_pfc_map_gpios()
The sh_pfc_map_gpios() function is only called at initialization time
when no other task can access the sh_pfc fields. Don't protect the
operation with a spinlock.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Wed, 28 Nov 2012 19:52:53 +0000 (20:52 +0100)]
sh-pfc: Drop the sh_pfc_pinctrl spinlock
The spinlock is used to protect data that is only accessed sequentially
during initialization. Remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Guennadi Liakhovetski [Tue, 12 Feb 2013 15:34:31 +0000 (16:34 +0100)]
sh-pfc: Fix a typo and simplify a definition on sh73a0
Fix definition of the SDHIWP0 function and simplify the CPU_ALL_PORT
definition on sh73a0.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Sat, 16 Feb 2013 15:38:30 +0000 (16:38 +0100)]
sh-pfc: Don't define the per-device pinctrl struct instances as global
The pinctrl_desc and pinctrl_gpio_range structures registered with the
pinctrl core are per-device instances. Move them to the dynamically
allocated sh_pfc_pinctrl structure and initialize them at runtime.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Fri, 15 Feb 2013 15:04:47 +0000 (16:04 +0100)]
sh-pfc: Declare operation structures as const
The pinconf, pinctrl and pinmux operation structures hold function
pointers that are never modified. Declare them as const.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Simon Horman [Fri, 15 Mar 2013 06:16:28 +0000 (07:16 +0100)]
Merge branch 'fixes' of git://git./linux/kernel/git/linusw/linux-pinctrl into pinmux-base
Sachin Kamat [Wed, 13 Mar 2013 11:43:46 +0000 (17:13 +0530)]
pinctrl: generic: Fix compilation error
The function definition of pinconf_generic_dump_config is defined
under CONFIG_DEBUG_FS macro. Define the declaration too under this macro.
Without this patch we get the following build error:
drivers/built-in.o: In function `pcs_pinconf_config_dbg_show':
drivers/pinctrl/pinctrl-single.c:726: undefined reference to
`pinconf_generic_dump_config'
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Laurent Pinchart [Wed, 13 Mar 2013 02:18:18 +0000 (03:18 +0100)]
pinctrl: Print the correct information in debugfs pinconf-state file
A bad copy&paste resulted in the debugfs pinconf-state file printing the
pin name instead of the state name. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Axel Lin [Tue, 5 Mar 2013 06:58:53 +0000 (14:58 +0800)]
pinctrl: abx500: Fix checking if pin use AlternateFunction register
It's pointless to check "af.alt_bit1 == UNUSED" twice.
This looks like a copy-paste bug, I think what we want is to check if *both*
af.alt_bit1 and af.alt_bit2 are UNUSED.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This page took 0.042358 seconds and 5 git commands to generate.