Arnd Bergmann [Tue, 9 Oct 2007 11:23:51 +0000 (13:23 +0200)]
compat_ioctl: move common block ioctls to compat_blkdev_ioctl
Make compat_blkdev_ioctl and blkdev_ioctl reflect the respective
native versions. This is somewhat more efficient and makes it easier
to keep the two in sync.
Also get rid of the bogus handling for broken_blkgetsize and the
duplicate entry for BLKRASET.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Grant Likely [Thu, 4 Oct 2007 06:52:40 +0000 (08:52 +0200)]
Sysace: Don't enable IRQ until after interrupt handler is registered
The previous patch to move the interrupt handler registration moved it
below enabling interrupts which could be a problem if the device is on
a shared interrupt line. This patch fixes the order.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Grant Likely [Thu, 4 Oct 2007 06:52:39 +0000 (08:52 +0200)]
Sysace: sparse fixes
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Grant Likely [Thu, 4 Oct 2007 06:52:38 +0000 (08:52 +0200)]
Sysace: Minor coding convention fixup
Put function call and return code test on separate lines.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Jeff Garzik [Thu, 27 Sep 2007 11:49:39 +0000 (07:49 -0400)]
drivers/block/umem: use DRIVER_NAME where appropriate
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Jeff Garzik [Thu, 27 Sep 2007 11:41:50 +0000 (07:41 -0400)]
drivers/block/umem: trim trailing whitespace
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Jeff Garzik [Thu, 27 Sep 2007 11:40:33 +0000 (07:40 -0400)]
drivers/block/umem: minor cleanups
* tab-align DRIVER_*, pci_driver entries
* reduced wasted memory by killing unused struct cardinfo members
* move free_irq() call above resource unmap, to fix tiny window where
irq handler may access recently-unmapped memory
* propagate pci_enable_device() return value
* use pci_request_regions, pci_release_regions() for resource reservation
* call pci_disable_device() in pci_driver::remove()
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Jeff Garzik [Thu, 27 Sep 2007 10:41:25 +0000 (06:41 -0400)]
drivers/block/umem: use dev_printk()
dev_printk() gives us a consistent prefix (driver name + PCI bus id),
which allows us to eliminate the hand-rolled one.
Also allows us to eliminate card->card_number, which was used solely in
printk() calls.
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Jeff Garzik [Thu, 27 Sep 2007 10:25:06 +0000 (06:25 -0400)]
drivers/block/umem: move private include away from include/linux
Move include/linux/umem.h to drivers/block, as umem.c is the only user,
and its not an exported header.
Move the PCI_{VENDOR,DEVICE}_ID_* constants to include/linux/pci_ids.h.
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Grant Likely [Mon, 1 Oct 2007 14:33:56 +0000 (16:33 +0200)]
Sysace: Labels in C code should not be indented.
Remove the indentation on labels
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Grant Likely [Mon, 1 Oct 2007 14:33:55 +0000 (16:33 +0200)]
Sysace: Add of_platform_bus binding
The of_platform bus binding is needed to make the device driver usable
under arch/powerpc.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Grant Likely [Mon, 1 Oct 2007 14:33:54 +0000 (16:33 +0200)]
Sysace: Move IRQ handler registration to occur after FSM is initialized
The FSM needs to be initialized before it is safe to call the ISR
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Grant Likely [Mon, 1 Oct 2007 14:33:54 +0000 (16:33 +0200)]
Sysace: minor rework and cleanup changes
Miscellanious rework to the sysace driver; Not critical, but makes the
subsequent addition of the of_platform bus binding a wee bit cleaner
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Grant Likely [Mon, 1 Oct 2007 14:33:53 +0000 (16:33 +0200)]
Sysace: Move structure allocation from bus binding into common code
Split the determination of device registers/irqs/etc from the actual
allocation and initialization of the device structure. This cleans
up the code a bit in preparation to add an of_platform bus binding
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Grant Likely [Mon, 1 Oct 2007 14:33:52 +0000 (16:33 +0200)]
Sysace: Use the established platform bus api
SystemACE uses the platform bus binding, but it doesn't use the
platform bus API. Move to using the correct API for consistency
sake and future proofing against platform bus changes.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Grant Likely [Mon, 1 Oct 2007 14:33:51 +0000 (16:33 +0200)]
Add Xilinx SystemACE entry to maintainers
I'm the author of the SystemACE driver
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
NeilBrown [Thu, 27 Sep 2007 10:47:43 +0000 (12:47 +0200)]
Drop 'size' argument from bio_endio and bi_end_io
As bi_end_io is only called once when the reqeust is complete,
the 'size' argument is now redundant. Remove it.
Now there is no need for bio_endio to subtract the size completed
from bi_size. So don't do that either.
While we are at it, change bi_end_io to return void.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
NeilBrown [Thu, 27 Sep 2007 10:46:13 +0000 (12:46 +0200)]
Don't decrement bi_size in bio_endio
The only caller of bio_endio that does not pass the full bi_size
is end_that_request_first. Also, no ->bi_end_io method is really
interested in bi_size being decremented.
So move the decrement and related code into ll_rw_blk and merge it
with order_bio_endio to form req_bio_endio which does endio functionality
specific to request completion.
As some ->bi_end_io methods do check bi_size of 0, we set it thus for
now, but that will go in the next patch.
Signed-off-by: Neil Brown <neilb@suse.de>
### Diffstat output
./block/ll_rw_blk.c | 42 +++++++++++++++++++++++++++---------------
./fs/bio.c | 23 +++++++++++------------
2 files changed, 38 insertions(+), 27 deletions(-)
diff .prev/block/ll_rw_blk.c ./block/ll_rw_blk.c
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
NeilBrown [Thu, 27 Sep 2007 10:46:12 +0000 (12:46 +0200)]
Only call bi_end_io once for any bio
Currently bi_end_io can be called multiple times as sub-requests
complete. However no ->bi_end_io function wants to know about that.
So only call when the bio is complete.
Signed-off-by: Neil Brown <neilb@suse.de>
### Diffstat output
./fs/bio.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff .prev/fs/bio.c ./fs/bio.c
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
NeilBrown [Thu, 27 Sep 2007 10:46:11 +0000 (12:46 +0200)]
Remove flush_dry_bio_endio
The entire function of flush_dry_bio_endio is to undo the effects
of bio_endio (when called on a barrier request). So remove the
function and the call to bio_endio.
This allows us to remove "bi_size" from "struct request_queue".
Signed-off-by: Neil Brown <neilb@suse.de>
### Diffstat output
./block/ll_rw_blk.c | 39 ++-------------------------------------
./include/linux/blkdev.h | 1 -
2 files changed, 2 insertions(+), 38 deletions(-)
diff .prev/block/ll_rw_blk.c ./block/ll_rw_blk.c
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Jens Axboe [Fri, 21 Sep 2007 07:19:54 +0000 (09:19 +0200)]
Fix warnings with !CONFIG_BLOCK
Hide everything in blkdev.h with CONFIG_BLOCK isn't set, and fixup
the (few) files that fail to build because they were relying on blkdev.h
pulling in extra includes for them.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Dhaval Giani [Thu, 23 Aug 2007 08:43:07 +0000 (10:43 +0200)]
Corrections in Documentation/block/ioprio.txt
The newer glibc does not allow system calls to be made via _syscallN()
wrapper. They have to be made through syscall(). The ionice code used
the older interface. Correcting it to use syscall.
Signed-off-by: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Satyam Sharma [Thu, 23 Aug 2007 07:29:40 +0000 (09:29 +0200)]
ll_rw_blk: blk_cpu_notifier should be __cpuinitdata
blk_cpu_notifier is marked as __devinitdata, but __devinitdata need not
be __init even if HOTPLUG_CPU=n, which wastes space. It should be marked
__cpuinitdata, and the callback itself as __cpuinit.
Signed-off-by: Satyam Sharma <satyam@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Jens Axboe [Thu, 16 Aug 2007 11:43:12 +0000 (13:43 +0200)]
Fixup rq_for_each_segment() indentation
Remove one level of nesting where appropriate.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
NeilBrown [Thu, 16 Aug 2007 11:31:30 +0000 (13:31 +0200)]
Share code between init_request_from_bio and blk_rq_bio_prep
These have very similar functions and should share code where
possible.
Signed-off-by: Neil Brown <neilb@suse.de>
diff .prev/block/ll_rw_blk.c ./block/ll_rw_blk.c
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
NeilBrown [Thu, 16 Aug 2007 11:31:28 +0000 (13:31 +0200)]
Stop exporting blk_rq_bio_prep
blk_rq_bio_prep is exported for use in exactly
one place. That place can benefit from using
the new blk_rq_append_bio instead.
So
- change dm-emc to call blk_rq_append_bio
- stop exporting blk_rq_bio_prep, and
- initialise rq_disk in blk_rq_bio_prep,
as dm-emc needs it.
Signed-off-by: Neil Brown <neilb@suse.de>
diff .prev/block/ll_rw_blk.c ./block/ll_rw_blk.c
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
NeilBrown [Thu, 16 Aug 2007 11:31:27 +0000 (13:31 +0200)]
New function blk_req_append_bio
ll_back_merge_fn is currently exported to SCSI where is it used,
together with blk_rq_bio_prep, in exactly the same way these
functions are used in __blk_rq_map_user.
So move the common code into a new function (blk_rq_append_bio), and
don't export ll_back_merge_fn any longer.
Signed-off-by: Neil Brown <neilb@suse.de>
diff .prev/block/ll_rw_blk.c ./block/ll_rw_blk.c
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
NeilBrown [Thu, 16 Aug 2007 11:31:26 +0000 (13:31 +0200)]
Fix various abuse of bio fields in umem.c
umem.c:
advances bi_idx and bi_sector to track where it is up to.
But it is only ever doing this on one bio, so the updated
fields can easily be kept elsewhere (current_*).
updates bi_size, but never uses the updated values, so
this isn't needed.
reuses bi_phys_segments to count how many iovecs have been
completely. As the completion happens sequentiually, we
can store this information outside the bio too.
Signed-off-by: Neil Brown <neilb@suse.de>
diff .prev/drivers/block/umem.c ./drivers/block/umem.c
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
NeilBrown [Tue, 25 Sep 2007 10:35:59 +0000 (12:35 +0200)]
Introduce rq_for_each_segment replacing rq_for_each_bio
Every usage of rq_for_each_bio wraps a usage of
bio_for_each_segment, so these can be combined into
rq_for_each_segment.
We define "struct req_iterator" to hold the 'bio' and 'index' that
are needed for the double iteration.
Signed-off-by: Neil Brown <neilb@suse.de>
Various compile fixes by me...
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
NeilBrown [Thu, 16 Aug 2007 11:27:52 +0000 (13:27 +0200)]
Merge blk_recount_segments into blk_recalc_rq_segments
blk_recalc_rq_segments calls blk_recount_segments on each bio,
then does some extra calculations to handle segments that overlap
two bios.
If we merge the code from blk_recount_segments into
blk_recalc_rq_segments, we can process the whole request one bio_vec
at a time, and not need the messy cross-bio calculations.
Then blk_recount_segments can be implemented by calling
blk_recalc_rq_segments, passing it a simple on-stack request which
stores just the bio.
Signed-off-by: Neil Brown <neilb@suse.de>
diff .prev/block/ll_rw_blk.c ./block/ll_rw_blk.c
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Linus Torvalds [Tue, 9 Oct 2007 20:31:38 +0000 (13:31 -0700)]
Linux 2.6.23
Linus Torvalds [Tue, 9 Oct 2007 19:38:44 +0000 (12:38 -0700)]
Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
[MIPS] Au1000: set the PCI controller IO base
[MIPS] Alchemy: Fix USB initialization.
[MIPS] IP32: Fix fatal typo in address computation.
Trond Myklebust [Tue, 9 Oct 2007 15:04:57 +0000 (11:04 -0400)]
NLM: Fix a memory leak in nlmsvc_testlock
The recent fix for a circular lock dependency unfortunately introduced a
potential memory leak in the event where the call to nlmsvc_lookup_host
fails for some reason.
Thanks to Roel Kluin for spotting this.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Garzik [Tue, 9 Oct 2007 17:51:57 +0000 (13:51 -0400)]
sata_mv: correct S/G table limits
The recent mv_fill_sg() rewrite, to fix a data corruption problem
related to IOMMU virtual merging, forgot to account for the
potentially-increased size of the scatter/gather table after its run.
Additionally, the DMA boundary is reduced from 0xffffffff to 0xffff
to more closely match the needs of mv_fill_sg().
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Florian Fainelli [Tue, 25 Sep 2007 15:07:30 +0000 (17:07 +0200)]
[MIPS] Au1000: set the PCI controller IO base
The PCI controller IO base was not set in the au1000 pci code.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Florian Fainelli [Tue, 25 Sep 2007 15:07:24 +0000 (17:07 +0200)]
[MIPS] Alchemy: Fix USB initialization.
This patch fixes a wrong ifdef in the board setup code, leading to the GPIO
pin not being pulled high, and thus the USB switch not being powered at all.
This finishes the rename of CONFIG_USB_OHCI to CONFIG_USB_OHCI_HCD, which
started in 2005 (before 2.6.12-rc2), then probably because things were
working anyway for most people got forgotten.
[Ralf: Paolo's original patch didn't fix the module case, Florian's patch
only fixed MTX1 etc. so this is a combined patch plus some cleanups.]
Cc: Giuseppe Patanè <giuseppe.patane@tvblob.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Giuseppe Sacco [Sat, 6 Oct 2007 17:55:03 +0000 (19:55 +0200)]
[MIPS] IP32: Fix fatal typo in address computation.
Signed-off-by: Giuseppe Sacco <eppesuig@debian.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Maarten Bressers [Mon, 8 Oct 2007 22:59:13 +0000 (15:59 -0700)]
Correct Makefile rule for generating custom keymap
When building a custom keymap, after setting GENERATE_KEYMAP := 1 in
drivers/char/Makefile, the kernel build fails like this:
CC drivers/char/vt.o
make[2]: *** No rule to make target `drivers/char/%.map', needed by `drivers/char/defkeymap.c'. Stop.
make[1]: *** [drivers/char] Error 2
make: *** [drivers] Error 2
This was caused by commit
af8b128719f5248e542036ea994610a29d0642a6, which
deleted a necessary colon from the Makefile rule that generates the keymap,
since that rule contains both a target and a target-pattern. The following
patch puts the colon back:
Signed-off-by: Maarten Bressers <mbres@gentoo.org>
Cc: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Karsten Keil [Mon, 8 Oct 2007 10:52:09 +0000 (12:52 +0200)]
ISDN: Fix data access out of array bounds
Fix against access random data bytes outside the dev->chanmap array.
Thanks to Oliver Neukum for pointing me to this issue.
Signed-off-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 8 Oct 2007 19:59:10 +0000 (12:59 -0700)]
Merge branch 'master' of /linux/kernel/git/davem/net-2.6
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
[IPv6]: Fix ICMPv6 redirect handling with target multicast address
[PKT_SCHED] cls_u32: error code isn't been propogated properly
[ROSE]: Fix rose.ko oops on unload
[TCP]: Fix fastpath_cnt_hint when GSO skb is partially ACKed
Yan Zheng [Mon, 8 Oct 2007 19:16:20 +0000 (12:16 -0700)]
AIO: fix cleanup in io_submit_one(...)
When IOCB_FLAG_RESFD flag is set and iocb->aio_resfd is incorrect,
statement 'goto out_put_req' is executed. At label 'out_put_req',
aio_put_req(..) is called, which requires 'req->ki_filp' set.
Signed-off-by: Yan Zheng<yanzheng@21cn.com>
Cc: Zach Brown <zach.brown@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yan Zheng [Mon, 8 Oct 2007 17:08:37 +0000 (10:08 -0700)]
fix page release issue in filemap_fault
find_lock_page increases page's usage count, we should decrease it
before return VM_FAULT_SIGBUS
Signed-off-by: Yan Zheng<yanzheng@21cn.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yan Zheng [Mon, 8 Oct 2007 17:05:48 +0000 (10:05 -0700)]
fix VM_CAN_NONLINEAR check in sys_remap_file_pages
The test for VM_CAN_NONLINEAR always fails
Signed-off-by: Yan Zheng<yanzheng@21cn.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Peter Zijlstra [Mon, 8 Oct 2007 16:54:37 +0000 (18:54 +0200)]
mm: set_page_dirty_balance() vs ->page_mkwrite()
All the current page_mkwrite() implementations also set the page dirty. Which
results in the set_page_dirty_balance() call to _not_ call balance, because the
page is already found dirty.
This allows us to dirty a _lot_ of pages without ever hitting
balance_dirty_pages(). Not good (tm).
Force a balance call if ->page_mkwrite() was successful.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Brian Haley [Mon, 8 Oct 2007 07:12:05 +0000 (00:12 -0700)]
[IPv6]: Fix ICMPv6 redirect handling with target multicast address
When the ICMPv6 Target address is multicast, Linux processes the
redirect instead of dropping it. The problem is in this code in
ndisc_redirect_rcv():
if (ipv6_addr_equal(dest, target)) {
on_link = 1;
} else if (!(ipv6_addr_type(target) & IPV6_ADDR_LINKLOCAL)) {
ND_PRINTK2(KERN_WARNING
"ICMPv6 Redirect: target address is not
link-local.\n");
return;
}
This second check will succeed if the Target address is, for example,
FF02::1 because it has link-local scope. Instead, it should be checking
if it's a unicast link-local address, as stated in RFC 2461/4861 Section
8.1:
- The ICMP Target Address is either a link-local address (when
redirected to a router) or the same as the ICMP Destination
Address (when redirected to the on-link destination).
I know this doesn't explicitly say unicast link-local address, but it's
implied.
This bug is preventing Linux kernels from achieving IPv6 Logo Phase II
certification because of a recent error that was found in the TAHI test
suite - Neighbor Disovery suite test 206 (v6LC.2.3.6_G) had the
multicast address in the Destination field instead of Target field, so
we were passing the test. This won't be the case anymore.
The patch below fixes this problem, and also fixes ndisc_send_redirect()
to not send an invalid redirect with a multicast address in the Target
field. I re-ran the TAHI Neighbor Discovery section to make sure Linux
passes all 245 tests now.
Signed-off-by: Brian Haley <brian.haley@hp.com>
Acked-by: David L Stevens <dlstevens@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen Hemminger [Mon, 8 Oct 2007 06:57:45 +0000 (23:57 -0700)]
[PKT_SCHED] cls_u32: error code isn't been propogated properly
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexey Dobriyan [Mon, 8 Oct 2007 06:44:17 +0000 (23:44 -0700)]
[ROSE]: Fix rose.ko oops on unload
Commit
a3d384029aa304f8f3f5355d35f0ae274454f7cd aka
"[AX.25]: Fix unchecked rose_add_loopback_neigh uses"
transformed rose_loopback_neigh var into statically allocated one.
However, on unload it will be kfree's which can't work.
Steps to reproduce:
modprobe rose
rmmod rose
BUG: unable to handle kernel NULL pointer dereference at virtual address
00000008
printing eip:
c014c664
*pde =
00000000
Oops: 0000 [#1]
PREEMPT DEBUG_PAGEALLOC
Modules linked in: rose ax25 fan ufs loop usbhid rtc snd_intel8x0 snd_ac97_codec ehci_hcd ac97_bus uhci_hcd thermal usbcore button processor evdev sr_mod cdrom
CPU: 0
EIP: 0060:[<
c014c664>] Not tainted VLI
EFLAGS:
00210086 (2.6.23-rc9 #3)
EIP is at kfree+0x48/0xa1
eax:
00000556 ebx:
c1734aa0 ecx:
f6a5e000 edx:
f7082000
esi:
00000000 edi:
f9a55d20 ebp:
00200287 esp:
f6a5ef28
ds: 007b es: 007b fs: 0000 gs: 0033 ss: 0068
Process rmmod (pid: 1823, ti=
f6a5e000 task=
f7082000 task.ti=
f6a5e000)
Stack:
f9a55d20 f9a5200c 00000000 00000000 00000000 f6a5e000 f9a5200c f9a55a00
00000000 bf818cf0 f9a51f3f f9a55a00 00000000 c0132c60 65736f72 00000000
f69f9630 f69f9528 c014244a f6a4e900 00200246 f7082000 c01025e6 00000000
Call Trace:
[<
f9a5200c>] rose_rt_free+0x1d/0x49 [rose]
[<
f9a5200c>] rose_rt_free+0x1d/0x49 [rose]
[<
f9a51f3f>] rose_exit+0x4c/0xd5 [rose]
[<
c0132c60>] sys_delete_module+0x15e/0x186
[<
c014244a>] remove_vma+0x40/0x45
[<
c01025e6>] sysenter_past_esp+0x8f/0x99
[<
c012bacf>] trace_hardirqs_on+0x118/0x13b
[<
c01025b6>] sysenter_past_esp+0x5f/0x99
=======================
Code: 05 03 1d 80 db 5b c0 8b 03 25 00 40 02 00 3d 00 40 02 00 75 03 8b 5b 0c 8b 73 10 8b 44 24 18 89 44 24 04 9c 5d fa e8 77 df fd ff <8b> 56 08 89 f8 e8 84 f4 fd ff e8 bd 32 06 00 3b 5c 86 60 75 0f
EIP: [<
c014c664>] kfree+0x48/0xa1 SS:ESP 0068:
f6a5ef28
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ilpo Järvinen [Mon, 8 Oct 2007 06:43:10 +0000 (23:43 -0700)]
[TCP]: Fix fastpath_cnt_hint when GSO skb is partially ACKed
When only GSO skb was partially ACKed, no hints are reset,
therefore fastpath_cnt_hint must be tweaked too or else it can
corrupt fackets_out. The corruption to occur, one must have
non-trivial ACK/SACK sequence, so this bug is not very often
that harmful. There's a fackets_out state reset in TCP because
fackets_out is known to be inaccurate and that fixes the issue
eventually anyway.
In case there was also at least one skb that got fully ACKed,
the fastpath_skb_hint is set to NULL which causes a recount for
fastpath_cnt_hint (the old value won't be accessed anymore),
thus it can safely be decremented without additional checking.
Reported by Cedric Le Goater <clg@fr.ibm.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Torokhov [Sun, 7 Oct 2007 16:22:21 +0000 (12:22 -0400)]
Driver core: fix SYSF_DEPRECATED breakage for nested classdevs
We should only reparent to a class former class devices that
form the base of class hierarchy. Nested devices should still
grow from their real parents.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Tested-by: Andrey Borzenkov <arvidjaar@mail.ru>
Tested-by: Anssi Hannula <anssi.hannula@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 7 Oct 2007 23:41:09 +0000 (16:41 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ieee1394/linux1394-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
firewire: point to migration document
Attila Kinali [Sun, 7 Oct 2007 07:24:38 +0000 (00:24 -0700)]
Add manufacturer and card id of teltonica pcmcia modems
Add the manufacturer and card id of teltonica pcmcia modems to serial_cs.c
Signed-off-by: Attila Kinali <attila@kinali.ch>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pavel Machek [Sun, 7 Oct 2007 07:24:37 +0000 (00:24 -0700)]
sysrq docs: document sequence that actually works
Document sequence of keypresses that actually works. Yes, this changed
year-or-so ago.
Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Sun, 7 Oct 2007 07:24:36 +0000 (00:24 -0700)]
fix bogus reporting of signals by audit
Async signals should not be reported as sent by current in audit log. As
it is, we call audit_signal_info() too early in check_kill_permission().
Note that check_kill_permission() has that test already - it needs to know
if it should apply current-based permission checks. So the solution is to
move the call of audit_signal_info() between those.
Bogosity in question is easily reproduced - add a rule watching for e.g.
kill(2) from specific process (so that audit_signal_info() would not
short-circuit to nothing), say load_policy, watch the bogus OBJ_PID entry
in audit logs claiming that write(2) on selinuxfs file issued by
load_policy(8) had somehow managed to send a signal to syslogd...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Steve Grubb <sgrubb@redhat.com>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexey Dobriyan [Sun, 7 Oct 2007 07:24:34 +0000 (00:24 -0700)]
Move kasprintf.o to obj-y
Modulat lguest started giving linking errors
MODPOST 1 modules
ERROR: "kasprintf" [drivers/lguest/lg.ko] undefined!
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Peter Zijlstra [Sun, 7 Oct 2007 07:24:33 +0000 (00:24 -0700)]
lockstat: documentation
Provide some documentation for CONFIG_LOCK_STAT.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Cc: Rob Landley <rob@landley.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rafal Bilski [Sun, 7 Oct 2007 07:24:32 +0000 (00:24 -0700)]
Longhaul: add auto enabled "revid_errata" option
VIA C3 Ezra-T has RevisionID equal to 1, but it needs RevisionKey to be 0
or CPU will ignore new frequency and will continue to work at old
frequency. New "revid_errata" option will force RevisionKey to be set to
0, whatever RevisionID is.
Additionaly "Longhaul" will not silently ignore unsuccessful transition.
It will try to check if "revid_errata" or "disable_acpi_c3" options need to
be enabled for this processor/system.
Same for Longhaul ver. 2 support. It will be disabled if none of above
options will work.
Best case scenario (with patch apllied and v2 enabled):
longhaul: VIA C3 'Ezra' [C5C] CPU detected. Longhaul v2 supported.
longhaul: Using northbridge support.
longhaul: VRM 8.5
longhaul: Max VID=1.350 Min VID=1.050, 13 possible voltage scales
longhaul: f: 300000 kHz, index: 0, vid: 1050 mV
[...]
longhaul: Voltage scaling enabled.
Worst case scenario:
longhaul: VIA C3 'Ezra-T' [C5M] CPU detected. Powersaver supported.
longhaul: Using northbridge support.
longhaul: Using ACPI support.
longhaul: VRM 8.5
longhaul: Claims to support voltage scaling but min & max are both 1.250. Voltage scaling disabled
longhaul: Failed to set requested frequency!
longhaul: Enabling "Ignore Revision ID" option.
longhaul: Failed to set requested frequency!
longhaul: Disabling ACPI C3 support.
longhaul: Disabling "Ignore Revision ID" option.
longhaul: Failed to set requested frequency!
longhaul: Enabling "Ignore Revision ID" option.
[akpm@linux-foundation.org: coding-style cleanups]
Signed-off-by: Rafal Bilski <rafalbilski@interia.pl>
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Anton Blanchard [Sun, 7 Oct 2007 07:24:31 +0000 (00:24 -0700)]
Fix timer_stats printout of events/sec
When using /proc/timer_stats on ppc64 I noticed the events/sec field wasnt
accurate. Sometimes the integer part was incorrect due to rounding (we
werent taking the fractional seconds into consideration).
The fraction part is also wrong, we need to pad the printf statement and
take the bottom three digits of 1000 times the value.
Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 7 Oct 2007 23:17:38 +0000 (16:17 -0700)]
Don't do load-average calculations at even 5-second intervals
It turns out that there are a few other five-second timers in the
kernel, and if the timers get in sync, the load-average can get
artificially inflated by events that just happen to coincide.
So just offset the load average calculation it by a timer tick.
Noticed by Anders Boström, for whom the coincidence started triggering
on one of his machines with the JBD jiffies rounding code (JBD is one of
the subsystems that also end up using a 5-second timer by default).
Tested-by: Anders Boström <anders@bostrom.dyndns.org>
Cc: Chuck Ebbert <cebbert@redhat.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 7 Oct 2007 23:02:55 +0000 (16:02 -0700)]
VT_WAITACTIVE: Avoid returning EINTR when not necessary
We should generally prefer to return ERESTARTNOHAND rather than EINTR,
so that processes with unhandled signals that get ignored don't return
EINTR.
This can help with X startup issues:
Fatal server error:
xf86OpenConsole: VT_WAITACTIVE failed: Interrupted system call
although the real fix is having the X server always retry EINTR
regardless (since EINTR does happen for signals that have handlers
installed). Keithp has a patch for that.
Regardless, ERESTARTNOHAND is the correct thing to use.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stefan Richter [Sun, 7 Oct 2007 10:31:22 +0000 (12:31 +0200)]
firewire: point to migration document
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Linus Torvalds [Sat, 6 Oct 2007 22:47:16 +0000 (15:47 -0700)]
Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
[MIPS] IP32: Enable PCI bridges
Kyle McMartin [Sat, 6 Oct 2007 05:42:34 +0000 (01:42 -0400)]
Revert "intel_agp: fix stolen mem range on G33"
This reverts commit
f443675affe3f16dd428e46f0f7fd3f4d703eeab, which
breaks horribly if you aren't running an unreleased xf86-video-intel
driver out of git.
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Zhenyu Wang <zhenyu.z.wang@intel.com>
Acked-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Benjamin Herrenschmidt [Sat, 6 Oct 2007 08:52:27 +0000 (18:52 +1000)]
Fix non-terminated PCI match table in PowerMac IDE
The PCI device table in the powermac IDE driver isn't properly
terminated. Depending on how your kernel is linked and other random
factors, you can end up with this driver matched against any other PCI
device in your system, possibly crashing at boot.
Thanks to Heikki for tracking this down with me, the bug have been there
for some time, though it rarely hurts due to luck. In this case, the
switch from .22 to .23-rc9 is causing it to show up due to differences
in the resulting layout of .data I suppose.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <pmac@au1.ibm.com>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Heikki Lindholm <holindho@cs.helsinki.fi>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeremy Fitzhardinge [Sat, 6 Oct 2007 00:19:35 +0000 (17:19 -0700)]
xen: disable split pte locks for now
When pinning and unpinning pagetables, we must protect them against
being used by other CPUs, lest they see the pagetable in an
intermediate read-only-but-not-pinned state.
When using split pte locks, doing this properly would require taking
all the pte locks for the pagetable while pinning, but this may overflow
the PREEMPT_BITS part of the preempt counter if the process has mapped
more than about 512M of memory.
However, failing to take the pte locks causes write-protect faults when
the pageout code is trying to clear the Access bit on a pte which is part
of a freshy created and still being pinned process after fork.
This is a short-term fix until the problem is solved properly.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Hugh Dickins <hugh@veritas.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andi Kleen <ak@suse.de>
Cc: Keir Fraser <keir@xensource.com>
Cc: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 5 Oct 2007 21:09:10 +0000 (14:09 -0700)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
[ARM] 4598/2: OSIRIS: Ensure we do not get nRSTOUT during suspend
[ARM] 4597/2: OSIRIS: ensure CPLD0 is preserved after suspend
Ben Dooks [Thu, 4 Oct 2007 22:18:08 +0000 (23:18 +0100)]
[ARM] 4598/2: OSIRIS: Ensure we do not get nRSTOUT during suspend
Ensure nRSTOUT is not asserted during or on resume.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Ben Dooks [Thu, 4 Oct 2007 22:16:42 +0000 (23:16 +0100)]
[ARM] 4597/2: OSIRIS: ensure CPLD0 is preserved after suspend
Ensure that CPLD is restored to the original state
on resume, and that before going into suspend we
select the NAND bank we booted from for restarting.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Francois Romieu [Wed, 3 Oct 2007 22:42:50 +0000 (00:42 +0200)]
r8169: revert part of
6dccd16b7c2703e8bbf8bca62b5cf248332afbe2
The 8169/8110SC currently announces itself as:
[...]
eth0: RTL8169sc/8110sc at 0x........, ..:..:..:..:..:.., XID
18000000 IRQ ..
^^^^^^^^
It uses RTL_GIGA_MAC_VER_05 and this part of the changeset can cut
its performance by a factor of 2~2.5 as reported by Timo.
(the driver includes code just before the hunk to write the ChipCmd
register when mac_version == RTL_GIGA_MAC_VER_0[1-4])
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Timo Jantunen <jeti@welho.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Linus Torvalds [Fri, 5 Oct 2007 15:08:08 +0000 (08:08 -0700)]
Merge branch 'master' of /linux/kernel/git/davem/sparc-2.6
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
[SPARC64]: Fix 'niu' complex IRQ probing.
[SPARC64]: check fork_idle() error
[SPARC64]: Temporary workaround for PCI-E slot on T1000.
[SPARC64]: VIO device addition log message level is too high.
[SPARC64]: Fix domain-services port probing.
[SPARC64]: Don't use in/local regs for ldx/stx data in N1 memcpy.
Serge Belyshev [Thu, 4 Oct 2007 21:10:04 +0000 (23:10 +0200)]
Remove unnecessary cast in prefetch()
It is ok to call prefetch() function with NULL argument, as specifically
commented in include/linux/prefetch.h. But in standard C, it is invalid
to dereference NULL pointer (see C99 standard 6.5.3.2 paragraph 4 and
note #84).
prefetch() has a memory reference for its argument.
Newer gcc versions (4.3 and above) will use that to conclude that "x"
argument is non-null and thus wreaking havok everywhere prefetch() was
inlined.
Fixed by removing cast and changing asm constraint.
[ It seems in theory gcc 4.2 could miscompile this too; although no
cases known. In 2.6.24 we should probably switch to
__builtin_prefetch() instead, but this is a simpler fix for now.
-- AK ]
Signed-off-by: Serge Belyshev <belyshev@depni.sinp.msu.ru>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Giuseppe Sacco [Thu, 4 Oct 2007 21:09:12 +0000 (23:09 +0200)]
[MIPS] IP32: Enable PCI bridges
Fixe MACE PCI addressing by adding the bus number parameter.
Remove check of the used slot since every slot should be valid.
Converted mkaddr from #define to inline function.
Signed-off-by: Giuseppe Sacco <eppesuig@debian.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David S. Miller [Thu, 4 Oct 2007 22:03:35 +0000 (15:03 -0700)]
[SPARC64]: Fix 'niu' complex IRQ probing.
They should be computed the same as how we compute
them under 'virtual-devices'.
Signed-off-by: David S. Miller <davem@davemloft.net>
Akinobu Mita [Thu, 4 Oct 2007 21:55:59 +0000 (14:55 -0700)]
[SPARC64]: check fork_idle() error
Check the return value of fork_idle() to catch error.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 4 Oct 2007 17:29:19 +0000 (10:29 -0700)]
Merge /linux/kernel/git/jejb/scsi-rc-fixes-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
[SCSI] megaraid_old: fix READ_CAPACITY
Hugh Dickins [Thu, 4 Oct 2007 15:56:06 +0000 (16:56 +0100)]
Fix sys_remap_file_pages BUG at highmem.c:15!
Gurudas Pai reports kernel BUG at arch/i386/mm/highmem.c:15! below
sys_remap_file_pages, while running Oracle database test on x86 in 6GB
RAM: kunmap thinks we're in_interrupt because the preempt count has
wrapped.
That's because __do_fault expected to unmap page_table, but one of its
two callers do_nonlinear_fault already unmapped it: let do_linear_fault
unmap it first too, and then there's no need to pass the page_table arg
down.
Why have we been so slow to notice this? Probably through forgetting
that the mapping_cap_account_dirty test means that sys_remap_file_pages
nowadays only goes the full nonlinear vma route on a few memory-backed
filesystems like ramfs, tmpfs and hugetlbfs.
[ It also depends on CONFIG_HIGHPTE, so it becomes even harder to
trigger in practice. Many who have need of large memory have probably
migrated to x86-64..
Problem introduced by commit
d0217ac04ca6591841e5665f518e38064f4e65bd
("mm: fault feedback #1") -- Linus ]
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: gurudas pai <gurudas.pai@oracle.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
FUJITA Tomonori [Wed, 3 Oct 2007 00:00:58 +0000 (09:00 +0900)]
[SCSI] megaraid_old: fix READ_CAPACITY
The bulk transfer mode got eleminated by
3f6270ef76f2ce5c134615a470685d6c2a66c07e. Unfortunately, this mode is
required for READ_CAPACITY commands on certain cards, so put it back
again. This fixes a boot failure regression reported by Burton
Windle.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
David S. Miller [Thu, 4 Oct 2007 04:37:57 +0000 (21:37 -0700)]
[SPARC64]: Temporary workaround for PCI-E slot on T1000.
The PCI-E slot on T1000 connects directly to the Fire PCI chip with no
intervening bridges visible in the OBP tree.
Unfortunately the bus numbering of the device in that slot is
different (2) from the PCI host controller (0), and thus the
pci_bus_{read,write}_config_*() calls don't work out.
Complicating things further the Fire PCI controller has no config
space it responds to either.
For now treat this case specially so that devices in the slot work.
Longer term we need to perhaps cons up a dummy bridge between the Fire
and the PCI-E slot so that the bus hierarchy is complete inside of the
kernel and thus the bus numbering all works out right.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 4 Oct 2007 04:23:40 +0000 (21:23 -0700)]
[SPARC64]: VIO device addition log message level is too high.
There is no reason this should be KERN_ERR, KERN_INFO is
just fine.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 4 Oct 2007 04:08:11 +0000 (21:08 -0700)]
[SPARC64]: Fix domain-services port probing.
We should only use ports underneath "domain-services", other DS ports
in the MDESC aren't for us to use.
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Wed, 3 Oct 2007 22:44:10 +0000 (15:44 -0700)]
Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
drivers/ata/pata_ixp4xx_cf.c: ioremap return code check
Ata: pata_marvell, use ioread* for iomap-ped memory
libata: fix for sata_mv >64KB DMA segments
Linus Torvalds [Wed, 3 Oct 2007 22:43:36 +0000 (15:43 -0700)]
Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/netdev-2.6
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
sky2: jumbo frame regression fix
[PATCH] softmac: Fix compiler-warning
[PATCH] bcm43xx: Correct printk with PFX before KERN_
Linus Torvalds [Wed, 3 Oct 2007 22:43:17 +0000 (15:43 -0700)]
Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
[MIPS] Terminally fix local_{dec,sub}_if_positive
[MIPS] Type proof reimplementation of cmpxchg.
[MIPS] pg-r4k.c: Fix a typo in an R4600 v2 erratum workaround
Linus Torvalds [Wed, 3 Oct 2007 22:34:07 +0000 (15:34 -0700)]
Merge branch 'for-linus' of /linux/kernel/git/cooloney/blackfin-2.6
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6:
Blackfin arch: fix PORT_J BUG for BF537/6 EMAC driver reported by Kalle Pokki <kalle.pokki@iki.fi>
Blackfin arch: gpio pinmux and resource allocation API required by BF537 on chip ethernet mac driver
Blackfin arch: add some missing syscall
binfmt_flat: checkpatch fixing minimum support for the blackfin relocations
Binfmt_flat: Add minimum support for the Blackfin relocations
Scott Thompson [Tue, 2 Oct 2007 20:53:01 +0000 (13:53 -0700)]
drivers/ata/pata_ixp4xx_cf.c: ioremap return code check
Add missing ioremap return checks.
Signed-off-by: Scott Thompson <postfail <at> hushmail.com>
Acked-by: Tejun Heo <htejun@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Jiri Slaby [Tue, 2 Oct 2007 20:53:01 +0000 (13:53 -0700)]
Ata: pata_marvell, use ioread* for iomap-ped memory
pata_marvell, use ioread* for iomap-ped memory
read* on pci_iomapped memory is incorrect, fix it
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Olof Johansson [Wed, 3 Oct 2007 01:45:27 +0000 (20:45 -0500)]
libata: fix for sata_mv >64KB DMA segments
Fix bug in sata_mv for cases where the IOMMU layer has merged SG entries
to larger than 64KB. They need to be split up before being sent to
the driver.
Just for simplicity's sake, split up at 64K boundary instead of 64K size,
since that's what the common code does anyway.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Sunil Mushran [Fri, 21 Sep 2007 18:41:43 +0000 (11:41 -0700)]
ocfs2: Unlock mutex in local alloc failure case
The fs was not unlocking the local alloc inode mutex in the code path in
which it failed to find a window of free bits in the global bitmap.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Stephen Hemminger [Wed, 3 Oct 2007 01:02:09 +0000 (18:02 -0700)]
sky2: jumbo frame regression fix
Remove unneeded check that caused problems with jumbo frame sizes.
The check was recently added and is wrong.
When using jumbo frames the sky2 driver does fragmentation, so
rx_data_size is less than mtu.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Jeff Garzik [Wed, 3 Oct 2007 17:39:16 +0000 (13:39 -0400)]
Merge branch 'fixes-jgarzik' of git://git./linux/kernel/git/linville/wireless-2.6 into upstream-fixes
Michael Hennerich [Wed, 3 Oct 2007 16:36:18 +0000 (00:36 +0800)]
Blackfin arch: fix PORT_J BUG for BF537/6 EMAC driver reported by Kalle Pokki <kalle.pokki@iki.fi>
Cc: Kalle Pokki <kalle.pokki@iki.fi>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Michael Hennerich [Wed, 3 Oct 2007 16:35:05 +0000 (00:35 +0800)]
Blackfin arch: gpio pinmux and resource allocation API required by BF537 on chip ethernet mac driver
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Ralf Baechle [Wed, 3 Oct 2007 13:29:19 +0000 (14:29 +0100)]
[MIPS] Terminally fix local_{dec,sub}_if_positive
They contain 64-bit instructions so wouldn't work on 32-bit kernels or
32-bit hardware. Since there are no users, blow them away. They
probably were only ever created because there are atomic_sub_if_positive
and atomic_dec_if_positive which exist only for sake of semaphores.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Mon, 1 Oct 2007 03:15:00 +0000 (04:15 +0100)]
[MIPS] Type proof reimplementation of cmpxchg.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Maciej W. Rozycki [Tue, 2 Oct 2007 13:47:22 +0000 (14:47 +0100)]
[MIPS] pg-r4k.c: Fix a typo in an R4600 v2 erratum workaround
Restore a load from KSEG1 done as a workaround for an R4600 v2
erratum, dropped with
211be16de99a7424e66c0b6c0d00e2c970508ac2.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Richard Knutsson [Mon, 1 Oct 2007 00:24:38 +0000 (02:24 +0200)]
[PATCH] softmac: Fix compiler-warning
CC net/ieee80211/softmac/ieee80211softmac_wx.o
/home/kernel/src/net/ieee80211/softmac/ieee80211softmac_wx.c: In function â
\80\98ieee80211softmac_wx_set_essidâ
\80\99:
/home/kernel/src/net/ieee80211/softmac/ieee80211softmac_wx.c:117: warning: label â
\80\98outâ
\80\99 defined but not used
due to commit:
efe870f9f4ad74410a18ecbf0d9ba7c14b50a0fb. Removing the label.
Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
David S. Miller [Tue, 2 Oct 2007 23:17:17 +0000 (16:17 -0700)]
[SPARC64]: Don't use in/local regs for ldx/stx data in N1 memcpy.
It doesn't matter for use in 64-bit objects, but when used in
32-bit environments the top 32-bits of the local and in
registers will get chopped off on the next register window
spill/restore which leads to difficult to track down and
subtle bugs.
Signed-off-by: David S. Miller <davem@davemloft.net>
Joe Perches [Tue, 2 Oct 2007 19:57:11 +0000 (12:57 -0700)]
[PATCH] bcm43xx: Correct printk with PFX before KERN_
Correct printk with PFX before KERN_ in bcm43xx_wx.c
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Linus Torvalds [Tue, 2 Oct 2007 17:41:06 +0000 (10:41 -0700)]
Merge branch 'sas-fixes' of /linux/kernel/git/jgarzik/misc-2.6
* 'sas-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6:
aic94xx: fix DMA data direction for SMP requests
Linus Torvalds [Tue, 2 Oct 2007 17:40:40 +0000 (10:40 -0700)]
Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/netdev-2.6
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
dm9601: Fix receive MTU
mv643xx_eth: Do not modify struct netdev tx_queue_len
qla3xxx: bugfix: Fix VLAN rx completion handling.
qla3xxx: bugfix: Add memory barrier before accessing rx completion.
Linus Torvalds [Tue, 2 Oct 2007 17:40:20 +0000 (10:40 -0700)]
Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
ata_piix: add another TECRA M3 entry to broken suspend list
This page took 0.048777 seconds and 5 git commands to generate.