Andrew Burgess [Tue, 8 Oct 2019 09:13:54 +0000 (10:13 +0100)]
gdb/testsuite: Merge cvexpr.exp and ctf-cvexpr.exp
The recently added gdb.base/ctf-cvexpr.exp is just a copy of
gdb.base/cvexpr.exp but compiled with different options. This patch
merges these two tests together into a single test script.
I tested this change using a version of GCC with CTF support added.
gdb/testsuite/ChangeLog:
* gdb.base/ctf-cvexpr.exp: Delete.
* gdb.base/cvexpr.exp: Rewrite to compile as both dwarf and ctf.
Change-Id: If678c3e38cb444867defa970203d26563f15dba4
Andrew Burgess [Tue, 8 Oct 2019 09:09:31 +0000 (10:09 +0100)]
gdb/testsuite: Introduce skip_ctf_tests guard function
Most versions of GCC in the wild don't support CTF debug format right
now, so, rather than attempting to compile the tests and failing each
time, this patch introduces a guard function to check if the compiler
supports CTF. If we don't have CTF support then the CTF tests are
skipped.
This patch only updates 3 of the 4 CTF tests, the fourth will be
handled in the next patch.
gdb/testsuite/ChangeLog:
* gdb.base/ctf-constvars.exp: Skip test if CTF is not supported in
the compiler. Clean up header comment a little.
* gdb.base/ctf-ptype.exp: Likewise.
* gdb.base/ctf-whatis.exp: Likewise.
* lib/gdb.exp (skip_ctf_tests): New proc.
Change-Id: I505c11169a9bc9871a31fc0c61e119f92f32cc63
Sergio Durigan Junior [Wed, 30 Oct 2019 17:58:29 +0000 (13:58 -0400)]
Fix crash with core + TUI + run
Ref.: https://bugzilla.redhat.com/show_bug.cgi?id=
1765117
A segfault can happen in a specific scenario when using TUI + a
corefile, as explained in the bug mentioned above. The problem
happens when opening a corefile on GDB:
$ gdb ./core program
entering TUI (C-x a), and then issuing a "run" command. GDB segfaults
with the following stack trace:
(top-gdb) bt
#0 0x00000000004cd5da in target_ops::shortname (this=0x0) at ../../binutils-gdb/gdb/target.h:449
#1 0x0000000000ac08fb in target_shortname () at ../../binutils-gdb/gdb/target.h:1323
#2 0x0000000000ac09ae in tui_locator_window::make_status_line[abi:cxx11]() const (this=0x23e1fa0 <_locator>) at ../../binutils-gdb/gdb/tui/tui-stack.c:86
#3 0x0000000000ac1043 in tui_locator_window::rerender (this=0x23e1fa0 <_locator>) at ../../binutils-gdb/gdb/tui/tui-stack.c:231
#4 0x0000000000ac1632 in tui_show_locator_content () at ../../binutils-gdb/gdb/tui/tui-stack.c:369
#5 0x0000000000ac63b6 in tui_set_key_mode (mode=TUI_COMMAND_MODE) at ../../binutils-gdb/gdb/tui/tui.c:321
#6 0x0000000000aaf9be in tui_inferior_exit (inf=0x2d446a0) at ../../binutils-gdb/gdb/tui/tui-hooks.c:181
#7 0x000000000044cddf in std::_Function_handler<void (inferior*), void (*)(inferior*)>::_M_invoke(std::_Any_data const&, inferior*&&) (__functor=..., __args#0=@0x7fffffffd650: 0x2d446a0)
at /usr/include/c++/9/bits/std_function.h:300
#8 0x0000000000757db9 in std::function<void (inferior*)>::operator()(inferior*) const (this=0x2cf3168, __args#0=0x2d446a0) at /usr/include/c++/9/bits/std_function.h:690
#9 0x0000000000757876 in gdb::observers::observable<inferior*>::notify (this=0x23de0c0 <gdb::observers::inferior_exit>, args#0=0x2d446a0)
at ../../binutils-gdb/gdb/gdbsupport/observable.h:106
#10 0x000000000075532d in exit_inferior_1 (inftoex=0x2d446a0, silent=1) at ../../binutils-gdb/gdb/inferior.c:191
#11 0x0000000000755460 in exit_inferior_silent (inf=0x2d446a0) at ../../binutils-gdb/gdb/inferior.c:234
#12 0x000000000059f47c in core_target::close (this=0x2d68590) at ../../binutils-gdb/gdb/corelow.c:265
#13 0x0000000000a7688c in target_close (targ=0x2d68590) at ../../binutils-gdb/gdb/target.c:3293
#14 0x0000000000a63d74 in target_stack::push (this=0x23e1800 <g_target_stack>, t=0x23c38c8 <the_amd64_linux_nat_target>) at ../../binutils-gdb/gdb/target.c:568
#15 0x0000000000a63dbf in push_target (t=0x23c38c8 <the_amd64_linux_nat_target>) at ../../binutils-gdb/gdb/target.c:583
#16 0x0000000000748088 in inf_ptrace_target::create_inferior (this=0x23c38c8 <the_amd64_linux_nat_target>, exec_file=0x2d58d30 "/usr/bin/cat", allargs="", env=0x25f12b0, from_tty=1)
at ../../binutils-gdb/gdb/inf-ptrace.c:128
#17 0x0000000000795ccb in linux_nat_target::create_inferior (this=0x23c38c8 <the_amd64_linux_nat_target>, exec_file=0x2d58d30 "/usr/bin/cat", allargs="", env=0x25f12b0, from_tty=1)
at ../../binutils-gdb/gdb/linux-nat.c:1094
#18 0x000000000074eae9 in run_command_1 (args=0x0, from_tty=1, run_how=RUN_NORMAL) at ../../binutils-gdb/gdb/infcmd.c:639
...
The problem happens because 'tui_locator_window::make_status_line'
needs the value of 'target_shortname' in order to update the status
line. 'target_shortname' is a macro which expands to:
#define target_shortname (current_top_target ()->shortname ())
and, in our scenario, 'current_top_target ()' returns NULL, which
obviously causes a segfault. But why does it return NULL, since,
according to its comment on target.h, it should never do that?
What is happening is that we're being caught in the middle of a
"target switch". We had the 'core_target' on top, because we were
inspecting a corefile, but when the user decided to invoke "run" GDB
had to actually create the inferior, which ends up detecting that we
have a target already, and tries to close it (from target.c):
/* See target.h. */
void
target_stack::push (target_ops *t)
{
/* If there's already a target at this stratum, remove it. */
strata stratum = t->stratum ();
if (m_stack[stratum] != NULL)
{
target_ops *prev = m_stack[stratum];
m_stack[stratum] = NULL;
target_close (prev); // <-- here
}
...
When the current target ('core_target') is being closed, it checks for
possible observers registered with it and calls them. TUI is one of
those observers, it gets called, tries to update the status line, and
GDB crashes.
The real problem is that we are clearing 'm_stack[stratum]', but
forgetting to adjust 'm_top'. Interestingly, this scenario is covered
in 'target_stack::unpush', but Pedro said he forgot to call it here..
The fix, therefore, is to call '::unpush' if there's a target on the
stack.
This patch has been tested on the Buildbot and no regressions have
been found. I'm also submitting a testcase for it.
gdb/ChangeLog:
2019-11-18 Sergio Durigan Junior <sergiodj@redhat.com>
Pedro Alves <palves@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=
1765117
* target.c (target_stack::push): Call 'unpush' if there's a
target on top of the stack.
gdb/testsuite/ChangeLog:
2019-11-18 Sergio Durigan Junior <sergiodj@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=
1765117
* gdb.tui/corefile-run.exp: New file.
Change-Id: I39e2f8b538c580c8ea5bf1d657ee877e47746c8f
GDB Administrator [Tue, 19 Nov 2019 00:00:21 +0000 (00:00 +0000)]
Automatic date update in version.in
Alan Modra [Wed, 2 Oct 2019 01:11:01 +0000 (10:41 +0930)]
[GOLD] OSABI not set when STT_GNU_IFUNC or STB_GNU_UNIQUE symbols output
This patch arranges to have OSABI set to ELFOSABI_GNU (if not set to
some other non-zero value) when gold outputs an ifunc local or global
symbol, or a unique global symbol to either .dynsym or .symtab.
STT_GNU_IFUNC and STB_GNU_UNIQUE have values in the LOOS to HIOS range
and therefore require interpretation according to OSABI.
I'm not sure why parameters->target() is const Target& while
parameters->sized_target() is Sized_target*, but it's inconvenient to
use the latter in Symbol_table::finalize. So this patch adds another
const_cast complained about in layout.cc and gold.cc.
PR 24853
* symtab.h (set_has_gnu_output, has_gnu_output_): New.
* symtab.cc (Symbol_table::Symbol_table): Init has_gnu_output_.
(Symbol_table::finalize): Set ELFOSABI_GNU when has_gnu_output_.
(Symbol_table::set_dynsym_indexes, Symbol_table::sized_finalize):
Call set_has_gnu_output for STT_GNU_IFUNC and STB_GNU_UNIQUE globals.
* object.cc (Sized_relobj_file::do_finalize_local_symbols): Call
set_has_gnu_output when STT_GNU_IFUNC locals will be output.
Alan Modra [Mon, 18 Nov 2019 20:59:26 +0000 (07:29 +1030)]
PR25200, SIGSEGV in _bfd_elf_validate_reloc
PR 25200
* reloc.c (bfd_default_reloc_type_lookup): Don't BFD_FAIL.
* elf.c (_bfd_elf_validate_reloc): Don't segfault on NULL howto.
Philippe Waroquiers [Sun, 17 Nov 2019 21:48:48 +0000 (22:48 +0100)]
Fix a bunch of python leaks due to missing calls to tp_free in *_dealloc functions.
valgrind reports leaks in many python tests, such as:
==17162== VALGRIND_GDB_ERROR_BEGIN
==17162== 8,208 (5,472 direct, 2,736 indirect) bytes in 57 blocks are definitely lost in loss record 7,551 of 7,679
==17162== at 0x4835753: malloc (vg_replace_malloc.c:307)
==17162== by 0x6EAFD1: _PyObject_New (object.c:279)
==17162== by 0x4720E6: blpy_iter(_object*) (py-block.c:92)
==17162== by 0x698772: PyObject_GetIter (abstract.c:2577)
==17162== by 0x2343BE: _PyEval_EvalFrameDefault (ceval.c:3159)
==17162== by 0x22E9E2: function_code_fastcall (call.c:283)
==17162== by 0x2340A8: _PyObject_Vectorcall (abstract.h:127)
==17162== by 0x2340A8: call_function (ceval.c:4987)
==17162== by 0x2340A8: _PyEval_EvalFrameDefault (ceval.c:3486)
==17162== by 0x22E9E2: function_code_fastcall (call.c:283)
==17162== by 0x82172B: _PyObject_Vectorcall (abstract.h:127)
==17162== by 0x82172B: method_vectorcall (classobject.c:67)
==17162== by 0x6AF474: _PyObject_Vectorcall (abstract.h:127)
==17162== by 0x6AF474: _PyObject_CallNoArg (abstract.h:153)
==17162== by 0x6AF474: _PyObject_CallFunctionVa (call.c:914)
==17162== by 0x6B0673: callmethod (call.c:1010)
==17162== by 0x6B0673: _PyObject_CallMethod_SizeT (call.c:1103)
==17162== by 0x477DFE: gdb_PyObject_CallMethod<> (python-internal.h:182)
==17162== by 0x477DFE: get_py_iter_from_func(_object*, char const*) (py-framefilter.c:272)
==17162== by 0x4791B4: py_print_args (py-framefilter.c:706)
==17162== by 0x4791B4: py_print_frame(_object*, enum_flags<frame_filter_flag>, ext_lang_frame_args, ui_out*, int, htab*) (py-framefilter.c:960)
==17162== by 0x47A130: gdbpy_apply_frame_filter(extension_language_defn const*, frame_info*, enum_flags<frame_filter_flag>, ext_lang_frame_args, ui_out*, int, int) (py-framefilter.c:1236)
==17162== by 0x369C39: apply_ext_lang_frame_filter(frame_info*, enum_flags<frame_filter_flag>, ext_lang_frame_args, ui_out*, int, int) (extension.c:563)
==17162== by 0x4EC9C9: backtrace_command_1 (stack.c:2031)
==17162== by 0x4EC9C9: backtrace_command(char const*, int) (stack.c:2183)
...
Most of the leaks in python tests are due to the fact that many
PyObject xxxxx_dealloc functions are missing the line to free self
or obj such as:
Py_TYPE (self)->tp_free (self);
or
Py_TYPE (obj)->tp_free (obj);
With this patch, the number of python tests leaking decreases from 52 to 12.
gdb/ChangeLog
2019-11-18 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* python/py-block.c (blpy_dealloc): Call tp_free.
(blpy_block_syms_dealloc): Likewise.
* python/py-finishbreakpoint.c (bpfinishpy_dealloc): Likewise.
* python/py-inferior.c (infpy_dealloc): Likewise.
* python/py-lazy-string.c (stpy_dealloc): Likewise.
* python/py-linetable.c (ltpy_iterator_dealloc): Likewise.
* python/py-symbol.c (sympy_dealloc): Likewise.
* python/py-symtab.c (stpy_dealloc): Likewise.
* python/py-type.c (typy_iterator_dealloc): Likewise.
Christian Biesinger [Mon, 18 Nov 2019 01:13:49 +0000 (19:13 -0600)]
Don't use class-initialization for the owner union
As reported by PhilippeW, valgrind reports that symtab is uninitialized
when compiling with GCC 4.8.5, which is the default compiler on CentOS 7.
This is apparently a compiler bug fixed in later versions, but to keep
CentOS 7 working, this patch initializes the union explicitly instead of
using a class initializer.
gdb/ChangeLog:
2019-11-18 Christian Biesinger <cbiesinger@google.com>
* symtab.h (struct symbol) <owner>: Initialize explicitly in the
constructor instead of using a class initializer.
Change-Id: I94f48afeae5d29cf81a280295e2d02e2d7e1c1f1
Alan Modra [Mon, 18 Nov 2019 06:39:40 +0000 (17:09 +1030)]
elf_backend_init_file_header
This patch renames elf_backend_post_process_headers and moves the
prep_headers code into the new function. Naming the backend functions
elf_backend_init_file_header and elf_backend_modify_headers makes it
clear which function is called first.
* elf-bfd.h (struct elf_backend_data <elf_backend_init_file_header>):
Rename from elf_backend_post_process_headers.
(_bfd_elf_post_process_headers): Delete.
(_bfd_elf_init_file_header): Declare.
* elf.c (_bfd_elf_compute_section_file_positions): Call new function
in place of prep_headers and elf_backend_post_process_headers.
(_bfd_elf_init_file_header): Renamed from prep_headers with
updated args and made global. Delete dead code.
(_bfd_elf_post_process_headers): Delete.
* elf32-arm.c (elf32_arm_init_file_header): Rename from
elf32_arm_post_process_headers and call _bfd_elf_init_file_header.
Return status.
(elf_backend_init_file_header): Define.
(elf_backend_post_process_headers): Don't define.
* elf32-i386.c (elf_i386_fbsd_init_file_header): Similarly.
* elf32-m68hc1x.c (elf32_m68hc11_init_file_header): Similarly.
* elf32-metag.c (elf_metag_init_file_header): Similarly.
* elf32-spu.c (spu_elf_init_file_header
* elf32-visium.c (visium_elf_init_file_header
* elf64-alpha.c (elf64_alpha_fbsd_init_file_header
* elf64-hppa.c (elf64_hppa_init_file_header
* elf64-ia64-vms.c (elf64_vms_init_file_header
* elfnn-aarch64.c (elfNN_aarch64_init_file_header
* elfnn-ia64.c (elfNN_hpux_init_file_header
* elfxx-mips.c (_bfd_mips_init_file_header
* elfxx-mips.h (_bfd_mips_post_process_headers): Delete.
(_bfd_mips_init_file_header): Declare.
(elf_backend_post_process_headers): Delete.
(elf_backend_init_file_header): Define.
* elfxx-target.h (elf_backend_post_process_headers): Delete.
(elf_backend_init_file_header): Define and use.
* elf32-m68hc12.c (elf_backend_init_file_header): Define.
(elf_backend_post_process_headers): Don't define.
* elf32-m68hc1x.h (elf32_m68hc11_post_process_headers): Delete.
(elf32_m68hc11_init_file_header): Declare.
* elf32-ppc.c (elf_backend_post_process_headers): Remove
unnecessary undef.
Alan Modra [Mon, 18 Nov 2019 06:39:01 +0000 (17:09 +1030)]
elf_backend_modify_headers
This patch renames elf_backend_modify_program_headers and moves the
elf.c code tweaking the ELF file header for -pie -Ttext-segment to a
new function, _bfd_elf_modify_headers, which then becomes the default
elf_backed_modify_headers and is called from any other target
elf_backed_modify_headers.
* elf-bfd.h (struct elf_backend_data <elf_backend_modify_headers>):
Rename from elf_backend_modify_program_headers.
(_bfd_elf_modify_headers): Declare.
* elf.c (assign_file_positions_except_relocs): Set
elf_program_header_size. Always call elf_backend_modify_headers.
Extract code modifying file header..
(_bfd_elf_modify_headers): ..to here. New function.
* elf32-arm.c (elf_backend_modify_headers): Renamed from
elf_backend_modify_program_headers.
* elf32-i386.c: Similarly.
* elf64-x86-64.c: Similarly.
* elfxx-target.h: Similarly. Default elf_backend_modify_headers
to _bfd_elf_modify_headers.
* elf-nacl.h (nacl_modify_headers): Rename from
nacl_modify_program_headers.
* elf-nacl.c (nacl_modify_headers): Rename from
nacl_modify_program_headers and call _bfd_elf_modify_headers.
* elf32-rx.c (elf32_rx_modify_headers): Similarly.
* elf32-spu.c (spu_elf_modify_headers): Similarly.
* elfnn-ia64.c (elfNN_ia64_modify_headers): Similarly.
* elf32-sh.c (elf_backend_modify_program_headers): Don't undef.
Alan Modra [Mon, 18 Nov 2019 02:01:55 +0000 (12:31 +1030)]
PR25196, abort in rewrite_elf_program_header
This patch introduces a new "sorry, cannot handle this file" bfd error
status. The idea is to use this error in cases where bfd hasn't found
a bfd_bad_value error, ie. an input file or set of options that are
invalid, but rather an input file that is simply too difficult to
process. Typically this might happen with fuzzed object files such as
the one in the PR, a wildly improbable core file. Some things are
just not worth wasting time over to fix "properly".
PR 25196
* bfd.c (bfd_error_type): Add bfd_error_sorry.
(bfd_errmsgs): Likewise.
* elf.c (rewrite_elf_program_header): Don't abort on confused
lma/alignment. Replace bfd_error_bad_value with bfd_error_sorry.
(_bfd_elf_validate_reloc): Use bfd_error_sorry.
(_bfd_elf_final_write_processing): Likewise.
* bfd-in2.h: Regenerate.
Andrew Burgess [Mon, 4 Nov 2019 12:27:45 +0000 (12:27 +0000)]
gas: Add --gdwarf-cie-version command line flag
Add a flag to control the version of CIE that is generated. By
default gas produces CIE version 1, and this continues to be the
default after this patch.
However, a user can now provide --gdwarf-cie-version=NUMBER to switch
to either version 3 or version 4 of CIE, version 2 was never released,
and so causes an error as does any number less than 1 or greater than
4.
Producing version 4 CIE requires two new fields to be added to the
CIE, an address size field, and an segment selector field. For a flat
address space the DWARF specification indicates that the segment
selector should be 0, and the address size fields just contains the
address size in bytes. For now we support 4 or 8 byte addresses, and
the segment selector is always produced as 0. At some future time we
might need to allow targets to override this.
gas/ChangeLog:
* as.c (parse_args): Parse --gdwarf-cie-version option.
(flag_dwarf_cie_version): New variable.
* as.h (flag_dwarf_cie_version): Declare.
* dw2gencfi.c (output_cie): Switch from DW_CIE_VERSION to
flag_dwarf_cie_version.
* doc/as.texi (Overview): Document --gdwarf-cie-version.
* NEWS: Likewise.
* testsuite/gas/cfi/cfi.exp: Add new tests.
* testsuite/gas/cfi/cie-version-0.d: New file.
* testsuite/gas/cfi/cie-version-1.d: New file.
* testsuite/gas/cfi/cie-version-2.d: New file.
* testsuite/gas/cfi/cie-version-3.d: New file.
* testsuite/gas/cfi/cie-version-4.d: New file.
* testsuite/gas/cfi/cie-version.s: New file.
include/ChangeLog:
* dwarf2.h (DW_CIE_VERSION): Delete.
Change-Id: I9de19461aeb8332b5a57bbfe802953d0725a7ae8
GDB Administrator [Mon, 18 Nov 2019 00:00:27 +0000 (00:00 +0000)]
Automatic date update in version.in
Alan Modra [Sun, 17 Nov 2019 22:46:19 +0000 (09:16 +1030)]
PR25198, use of out of date pointer
PR 25198
* prdbg.c (tg_start_class_type): Correct scope of idbuf.
GDB Administrator [Sun, 17 Nov 2019 00:01:15 +0000 (00:01 +0000)]
Automatic date update in version.in
GDB Administrator [Sat, 16 Nov 2019 00:00:17 +0000 (00:00 +0000)]
Automatic date update in version.in
Christian Biesinger [Wed, 13 Nov 2019 03:55:15 +0000 (21:55 -0600)]
Use gnulib's strerror_r on MinGW
There is no need to keep mingw-strerror around; we can just always use
the code from posix-strerror. The main reason we had that code, it
seems, is to handle winsock error codes, but gnulib's version
handles those.
Unfortunately the code can't be moved into common-utils.c because
libinproctrace.so uses common-utils but not gnulib.
gdb/ChangeLog:
2019-11-15 Christian Biesinger <cbiesinger@google.com>
* Makefile.in: Replace {posix,mingw}-strerror.c with safe-strerror.c.
* configure: Regenerate.
* configure.ac: Don't source common.host.
* gdbsupport/common.host: Remove.
* gdbsupport/mingw-strerror.c: Remove.
* gdbsupport/posix-strerror.c: Rename to...
* gdbsupport/safe-strerror.c: ...this.
gdb/gdbserver/ChangeLog:
2019-11-15 Christian Biesinger <cbiesinger@google.com>
* Makefile.in: Add safe-strerror.c.
* configure: Regenerate.
* configure.ac: Don't source common.host.
Change-Id: I9e6d8a752fc398784201f370cafee65e0ea05474
Tom Tromey [Fri, 15 Nov 2019 20:48:27 +0000 (13:48 -0700)]
Add no-dist to gnulib configure
This adds the no-dist option to the gnulib configure script. gdb
doesn't use "make dist", so there's no need for this. Adding this
option makes the Makefiles less verbose.
gnulib/ChangeLog
2019-11-15 Tom Tromey <tromey@adacore.com>
* aclocal.m4, configure, Makefile.in, import/Makefile.in:
Rebuild.
* configure.ac: Remove obsolete comment. Add no-dist.
Change-Id: I5224e18af9acd5284acb79d5756b0e84b00406e9
Tom Tromey [Fri, 15 Nov 2019 20:40:53 +0000 (13:40 -0700)]
Minor updates to readline configury
Christian's recent patches to gnulib made me realize that readline
should be changed to use AC_CONFIG_MACRO_DIRS (ACLOCAL_AMFLAGS is
deprecated) and that it can put the automake options into
configure.ac. I also added no-define to the automake options. This
doesn't matter much (we don't generate a config.h here), but gnulib
does it, and it does make configure slightly smaller.
readline/ChangeLog
2019-11-15 Tom Tromey <tromey@adacore.com>
* configure, Makefile.in: Rebuild.
* configure.ac: Use AC_CONFIG_MACRO_DIRS. Pass options to
AM_INIT_AUTOMAKE.
* Makefile.am (AUTOMAKE_OPTIONS, ACLOCAL_AMFLAGS): Remove.
Change-Id: If421599cc9dd9c4c3c37b9b439ab2c22c01742ed
Christian Biesinger [Thu, 31 Oct 2019 21:02:41 +0000 (16:02 -0500)]
Use ctime_r and localtime_r for threadsafety
To make these calls threadsafe. localtime_r is provided by gnulib if
necessary, and for ctime_r we can just use it because it is in a linux-
specific file.
gdb/ChangeLog:
2019-11-15 Christian Biesinger <cbiesinger@google.com>
* maint.c (scoped_command_stats::print_time): Use localtime_r
instead of localtime (provided through gnulib if necessary).
* nat/linux-osdata.c (time_from_time_t): Use ctime_r instead
of ctime.
Change-Id: I329bbdc39d5b576f51859ba00f1617e024c30cbd
Christian Biesinger [Fri, 8 Nov 2019 17:25:17 +0000 (11:25 -0600)]
Import the time_r gnulib module
This allows GDB to use localtime_r unconditionally.
See https://lists.gnu.org/archive/html/bug-gnulib/2019-11/msg00022.html
for details on the compile error mentioned below.
gdb/ChangeLog:
2019-11-15 Christian Biesinger <cbiesinger@google.com>
* gdbsupport/common-defs.h: Include time.h before pathmax.h to
avoid compile errors.
gnulib/ChangeLog:
2019-11-15 Christian Biesinger <cbiesinger@google.com>
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* config.in: Regenerate.
* configure: Regenerate.
* import/Makefile.am: Update.
* import/Makefile.in: Regenerate.
* import/m4/gnulib-cache.m4: Update.
* import/m4/gnulib-comp.m4: Update.
* import/m4/time_r.m4: New file.
* import/time_r.c: New file.
* update-gnulib.sh: Import time_r.
Change-Id: I53fc861b192940d613ca97f2910b4533c730f667
Christian Biesinger [Wed, 6 Nov 2019 18:49:52 +0000 (12:49 -0600)]
Import the strerror_r-posix module and use it in GDB.
Makes sure to assign the return value of strerror_r to an int,
so that we get a compile error if we accidentally get the
wrong version.
gdb/ChangeLog:
2019-11-15 Christian Biesinger <cbiesinger@google.com>
* config.in: Regenerate.
* configure: Regenerate.
* gdbsupport/common.m4: No longer check for strerror_r.
* gdbsupport/posix-strerror.c (safe_strerror): Always call the
POSIX version of strerror_r, now that gnulib provides it if
necessary.
gdb/gdbserver/ChangeLog:
2019-11-15 Christian Biesinger <cbiesinger@google.com>
* config.in: Regenerate.
* configure: Regenerate.
gnulib/ChangeLog:
2019-11-15 Christian Biesinger <cbiesinger@google.com>
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* config.in: Regenerate.
* configure: Regenerate.
* import/Makefile.am: Update.
* import/Makefile.in: Regenerate.
* import/extra/config.rpath: New file.
* import/glthread/lock.c: New file.
* import/glthread/lock.h: New file.
* import/glthread/threadlib.c: New file.
* import/m4/gnulib-cache.m4: Update.
* import/m4/gnulib-comp.m4: Update.
* import/m4/lib-ld.m4: New file.
* import/m4/lib-link.m4: New file.
* import/m4/lib-prefix.m4: New file.
* import/m4/lock.m4: New file.
* import/m4/strerror_r.m4: New file.
* import/m4/threadlib.m4: New file.
* import/strerror_r.c: New file.
* update-gnulib.sh: Import strerror_r-posix.
Change-Id: I5cfeb12a5203a4cd94a78581541e6085a68685c3
Christian Biesinger [Fri, 15 Nov 2019 00:17:59 +0000 (16:17 -0800)]
Generate gnulib's toplevel Makefile.in using automake
This is a lot simpler and as a side-effect this will correctly
regenerate import/Makefile and config.h during rebuilds if
necessary.
gnulib/ChangeLog:
2019-11-15 Christian Biesinger <cbiesinger@google.com>
* Makefile.am: New file.
* Makefile.in: Replace with generated file.
* aclocal-m4-deps.mk: Remove.
* configure.ac: Use the foreign option for automake and specify
the aclocal search path here.
* update-gnulib.sh: Don't generate aclocal-m4-deps.mk anymore.
Also don't specify the aclocal include path here, now that it
is in configure.ac.
Change-Id: I6a2c4d41cf4f0e21d5c813197bad63ed5c08e408
Nick Clifton [Fri, 15 Nov 2019 11:52:50 +0000 (11:52 +0000)]
Revert previous delta.
PR 2587
* Makefile.am: Revert change from 2019-11-13.
* Makefile.in: Regenerate.
Christian Biesinger [Mon, 11 Nov 2019 18:39:31 +0000 (10:39 -0800)]
Update README
Adds descriptions for some recent-ish configure options to README.
Also updates the minimum Python version per commit
6c28e44a359e9f6cf455ddff0009ca99406f7224.
2019-11-14 Christian Biesinger <cbiesinger@google.com>
* README (`configure' options): Update.
Change-Id: I8ce8ca6935afbd130295e143802c585cf1e735f9
GDB Administrator [Fri, 15 Nov 2019 00:00:24 +0000 (00:00 +0000)]
Automatic date update in version.in
Tom Tromey [Tue, 5 Nov 2019 17:12:27 +0000 (10:12 -0700)]
Allow re-assigning to convenience variables
A customer reported somewhat odd gdb behavior, where re-assigning an
array or string to a convenience variable would yield "Too many array
elements". A test case is:
(gdb) p $x = "x"
(gdb) p $x = "xyz"
This patch fixes the problem by making a special case in the evaluator
for assignment to convenience variables, which seems like the correct
behavior.
Note that a previous patch implemented this for Ada, see commit
f411722cb ("Allow re-assigning to convenience variables").
gdb/ChangeLog
2019-11-14 Tom Tromey <tromey@adacore.com>
* eval.c (evaluate_subexp_standard) <BINOP_ASSIGN>: Do not pass an
expected type for the RHS if the LHS is a convenience variable.
gdb/testsuite/ChangeLog
2019-11-14 Tom Tromey <tromey@adacore.com>
* gdb.base/gdbvars.exp (test_convenience_variables): Add
regression tests.
Change-Id: I5e66a2d243931a5c43c7af4bc9f6717464c2477e
Tom de Vries [Thu, 14 Nov 2019 13:43:11 +0000 (14:43 +0100)]
[gdb/doc] Fix typos
Fix typos in gdb docs.
gdb/doc/ChangeLog:
2019-11-14 Tom de Vries <tdevries@suse.de>
* gdb.texinfo: Fix typos.
* python.texi: Same.
* stabs.texinfo: Same.
Change-Id: I044d6788eeea48e4a9b73ee752e5aaf333e56a46
Nick Clifton [Thu, 14 Nov 2019 12:11:43 +0000 (12:11 +0000)]
Another attempt at fixing building gprof with gmake.
PR 2587
* Makefile.am (SUFFIXES): Add .c.
* Makefile.in: Regenerate.
Simon Marchi [Thu, 14 Nov 2019 11:50:20 +0000 (06:50 -0500)]
gdb: fix build error in unittests/vec-utils-selftests.c
When building with gcc 9.2.0, I get the following build error:
In file included from /home/simark/src/binutils-gdb/gdb/unittests/vec-utils-selftests.c:23:
/home/simark/src/binutils-gdb/gdb/gdbsupport/gdb_vecs.h: In instantiation of ‘T unordered_remove(std::__debug::vector<T>&, typename std::__debug::vector<T>::iterator) [with T = selftests::vector_utils_tests::unordered_remove_tests()::obj; typename std::__debug::vector<T>::iterator = __gnu_debug::_Safe_iterator<__gnu_cxx::__normal_iterator<selftests::vector_utils_tests::unordered_remove_tests()::obj*, std::__cxx1998::vector<selftests::vector_utils_tests::unordered_remove_tests()::obj, std::allocator<selftests::vector_utils_tests::unordered_remove_tests()::obj> > >, std::__debug::vector<selftests::vector_utils_tests::unordered_remove_tests()::obj>, std::random_access_iterator_tag>]’:
/home/simark/src/binutils-gdb/gdb/unittests/vec-utils-selftests.c:53:26: required from here
/home/simark/src/binutils-gdb/gdb/gdbsupport/gdb_vecs.h:53:5: error: implicitly-declared ‘selftests::vector_utils_tests::unordered_remove_tests()::obj::obj(const selftests::vector_utils_tests::unordered_remove_tests()::obj&)’ is deprecated [-Werror=deprecated-copy]
53 | T removed = std::move (*it);
| ^~~~~~~
/home/simark/src/binutils-gdb/gdb/unittests/vec-utils-selftests.c:41:10: note: because ‘selftests::vector_utils_tests::unordered_remove_tests()::obj’ has user-provided ‘selftests::vector_utils_tests::unordered_remove_tests()::obj& selftests::vector_utils_tests::unordered_remove_tests()::obj::operator=(const selftests::vector_utils_tests::unordered_remove_tests()::obj&)’
41 | obj &operator= (const obj &other)
| ^~~~~~~~
In file included from /home/simark/src/binutils-gdb/gdb/unittests/vec-utils-selftests.c:23:
/home/simark/src/binutils-gdb/gdb/gdbsupport/gdb_vecs.h:58:10: error: implicitly-declared ‘selftests::vector_utils_tests::unordered_remove_tests()::obj::obj(const selftests::vector_utils_tests::unordered_remove_tests()::obj&)’ is deprecated [-Werror=deprecated-copy]
58 | return removed;
| ^~~~~~~
/home/simark/src/binutils-gdb/gdb/unittests/vec-utils-selftests.c:41:10: note: because ‘selftests::vector_utils_tests::unordered_remove_tests()::obj’ has user-provided ‘selftests::vector_utils_tests::unordered_remove_tests()::obj& selftests::vector_utils_tests::unordered_remove_tests()::obj::operator=(const selftests::vector_utils_tests::unordered_remove_tests()::obj&)’
41 | obj &operator= (const obj &other)
| ^~~~~~~~
I think gcc is just trying to be nice and recommends the good practice
of providing a copy constructor if an assignment operator is provided.
Silence the warning by providing that copy constructor.
gdb/ChangeLog:
* unittests/vec-utils-selftests.c (unordered_remove_tests::obj):
Provide explicit default and copy constructor.
Change-Id: I323361b1c120bf8525613b74e7e5983910e002df
Jan Beulich [Thu, 14 Nov 2019 07:48:22 +0000 (08:48 +0100)]
x86: drop redundant SYSCALL/SYSRET templates
The Cpu64 forms are no different in their attributes except for the CPU
flags; there's no need to key these off of anything other than
CpuSYSCALL even for the 64-bit forms. Dropping these improves the
diagnostic on SYSRETQ used in 32-bit code from "unsupported instruction
`sysret'" to "invalid instruction suffix for `sysret'".
Jan Beulich [Thu, 14 Nov 2019 07:47:44 +0000 (08:47 +0100)]
x86: fold individual Jump* attributes into a single Jump one
..., taking just 3 bits instead of 5. No two of them are used together.
Jan Beulich [Thu, 14 Nov 2019 07:47:03 +0000 (08:47 +0100)]
x86: make JumpAbsolute an insn attribute
... instead of an operand one: There's only ever one operand here
anyway.
Jan Beulich [Thu, 14 Nov 2019 07:46:19 +0000 (08:46 +0100)]
x86: make AnySize an insn attribute
... instead of an operand one. Which operand it applies to can be
determined from other operand properties, but as it turns out the only
place it is actually used at doesn't even need further qualification.
Jan Beulich [Thu, 14 Nov 2019 07:45:26 +0000 (08:45 +0100)]
x86/Intel: correct CMPSD test cases' regexp closing paren placement
The CMPS test case derivation from their MOVS counterparts I did in
d241b91073 ("x86/Intel: correct MOVSD and CMPSD handling") ended up
with misplaced closing parentheses in som regexps. Correct this.
Jan Beulich [Thu, 14 Nov 2019 07:44:57 +0000 (08:44 +0100)]
x86/Intel: extend MOVSD/CMPSD testsuite coverage
This is still in the context of PR/gas 25167.
Philippe Waroquiers [Tue, 12 Nov 2019 19:33:29 +0000 (20:33 +0100)]
Fix python gdbpy_breakpoint_object leak.
valgrind reports a leak when a breakpoint is created then deleted:
==1313== 40 bytes in 1 blocks are definitely lost in loss record 1,115 of 8,596
==1313== at 0x4835753: malloc (vg_replace_malloc.c:307)
==1313== by 0x6E05BC: _PyObject_New (object.c:255)
==1313== by 0x470E4B: gdbpy_breakpoint_created(breakpoint*) (py-breakpoint.c:1023)
==1313== by 0x2946D9: operator() (std_function.h:687)
==1313== by 0x2946D9: notify (observable.h:106)
==1313== by 0x2946D9: install_breakpoint(int, std::unique_ptr<breakpoint, std::default_delete<breakpoint> >&&, int) (breakpoint.c:8136)
==1313== by 0x295BCA: create_breakpoint_sal (breakpoint.c:8878)
==1313== by 0x295BCA: create_breakpoints_sal (breakpoint.c:8919)
==1313== by 0x295BCA: create_breakpoints_sal_default (breakpoint.c:13671)
...
The leak is due to a superfluous Py_INCREF when the python object
is allocated inside gdbpy_breakpoint_created, when the python object
is allocated locally: this object has already a refcount of 1, and
the only reference is the reference from the C breakpoint object.
The Py_INCREF is however needed when the python object was created from
python: the python object was stored in bppy_pending_object, and
gdbpy_breakpoint_created creates a new reference to this object.
Solve the leak by calling 'Py_INCREF (newbp);' only in the bppy_pending_object
case.
Regression tested on debian/amd64 natively and under valgrind on centos/amd64.
Before the patch, 795 tests have a definite leak.
After the patch, 197 have a definite leak.
Thanks to Tom, that helped on irc with the python refcount logic.
gdb/ChangeLog
2019-11-14 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* python/py-finishbreakpoint.c (gdbpy_breakpoint_created):
only call Py_INCREF (newbp) in the bppy_pending_object case.
GDB Administrator [Thu, 14 Nov 2019 00:00:21 +0000 (00:00 +0000)]
Automatic date update in version.in
Tom Tromey [Mon, 11 Nov 2019 14:43:13 +0000 (07:43 -0700)]
Remove symbol-related static asserts
commit
3573abe1d added static asserts to ensure that symbol sizes
don't vary. However, this failed to build on Windows, on at least one
ARM platform (see PR build/25182) and internally at AdaCore for PPC.
So, I think it is probably best to just remove these assertions,
effectively reverting
3573abe1d.
gdb/ChangeLog
2019-11-13 Tom Tromey <tromey@adacore.com>
PR build/25182:
* psympriv.h (partial_symbol): Remove static assert.
* symtab.h (general_symbol_info, symbol): Remove static assert.
Change-Id: I51940fb2240c474838b48494b5072081701789bb
Nick Clifton [Wed, 13 Nov 2019 11:21:39 +0000 (11:21 +0000)]
Fix the rule for building C files in the gprof makefile.
PR 2587
* Makefile.am: Fix rule to build .c files from .m files.
Christian Biesinger [Wed, 13 Nov 2019 02:11:37 +0000 (20:11 -0600)]
gnulib: Fix path to import/Makefile{,.in}
I don't know why this path is what it is but it is clearly wrong.
gnulib/ChangeLog:
2019-11-12 Christian Biesinger <cbiesinger@google.com>
* Makefile.in: Fix path to say import/ instead of gnulib/.
Change-Id: Ib7f6a319ee764d20072e38911766ca7032d6ca8e
Jim Wilson [Wed, 13 Nov 2019 00:13:00 +0000 (16:13 -0800)]
RISC-V: Support the INSN_CLASS.*F.* classes for .insn directive.
We have to enable the f extension through -march or ELF attribute if we use the
FPR in .insn directive. The behavior is same as the riscv_opcodes.
2019-11-12 Nelson Chu <nelson.chu@sifive.com>
opcodes/
* riscv-opc.c (riscv_insn_types): Replace the INSN_CLASS_I with
INSN_CLASS_F and the INSN_CLASS_C with INSN_CLASS_F_AND_C if we
use the floating point register (FPR).
gas/
* testsuite/gas/riscv/insn.d: Add the f extension to -march option.
Change-Id: I4f59d04c82673ef84c56ecd2659ad8ce164dd626
GDB Administrator [Wed, 13 Nov 2019 00:00:20 +0000 (00:00 +0000)]
Automatic date update in version.in
Jim Wilson [Tue, 12 Nov 2019 23:50:48 +0000 (15:50 -0800)]
RISC-V: Fix ld relax failure with calls and align directives.
Make _bfd_riscv_relax_call handle section alignment padding same as
the _bfd_riscv_relax_lui and _bfd_riscv_relax_pc functions already
do. Use the max section alignment if section boundaries are crossed,
otherwise the alignment of the containing section.
bfd/
PR 25181
* elfnn-riscv.c (_bfd_riscv_relax_call): Always add max_alignment to
foff. If sym_sec->output_section and sec->output_section are the same
and not *ABS* then set max_alignment to that section's alignment.
ld/
PR 25181
* testsuite/ld-riscv-elf/call-relax-0.s: New file.
* testsuite/ld-riscv-elf/call-relax-1.s: New file.
* testsuite/ld-riscv-elf/call-relax-2.s: New file.
* testsuite/ld-riscv-elf/call-relax-3.s: New file.
* testsuite/ld-riscv-elf/call-relax.d: New test.
* testsuite/ld-riscv-elf/ld-riscv-elf.exp: Run call-relax test.
Change-Id: Iaf65cee52345abf1955f36e8e72c4f6cc0db8d9a
Andrew Burgess [Tue, 5 Nov 2019 14:24:17 +0000 (14:24 +0000)]
gdb: Support printf 'z' size modifier
The gdb format mechanism doesn't currently support the 'z' size
modifier, there are a few places in GDB where this is used. Instead
of removing these uses lets just add support to GDB for using 'z'.
I found this issue when trying to use some of the debug output.
Before this commit:
(gdb) set debug dwarf-line 9
(gdb) file test
Reading symbols from test...
Unrecognized format specifier 'z' in printf
(No debugging symbols found in test)
(gdb)
After this commit:
(gdb) set debug dwarf-line 9
(gdb) file test
Reading symbols from test...
Adding dir 1: /usr/include
Adding file 1: test.c
Adding file 2: stdc-predef.h
Processing actual line 3: file 1, address 0x4004a0, is_stmt 1, discrim 0
Processing actual line 4: file 1, address 0x4004a0, is_stmt 1, discrim 0
.... lots of debug output ...
Processing actual line 10: file 1, address 0x4003b7, is_stmt 0, discrim 0
(gdb)
I've added a self test to cover the integer format size modifiers,
including the 'z' modifier.
gdb/ChangeLog:
* gdbsupport/format.c (format_pieces::format_pieces): Support
printf 'z' size modifier.
* gdbsupport/format.h (enum argclass): Add size_t_arg.
* printcmd.c (ui_printf): Handle size_t_arg.
* ui-out.c (ui_out::vmessage): Likewise.
* unittests/format_pieces-selftests.c (test_format_int_sizes): New
function.
(run_tests): Call test_format_int_sizes.
gdb/gdbserver/ChangeLog:
* ax.c (ax_printf): Handle size_t_arg.
Change-Id: Ib6c44d88aa5bce265d757e4c0698881803dd186f
Christian Biesinger [Mon, 4 Nov 2019 19:12:09 +0000 (13:12 -0600)]
Make struct symbol inherit from general_symbol_info
Since this is now no longer a POD, also give it a constructor that
initializes all fields. (I have considered overloading operator new
to zero-initialize the memory instead; let me know if you prefer that)
gdb/ChangeLog:
2019-11-12 Christian Biesinger <cbiesinger@google.com>
* ada-exp.y (write_ambiguous_var): Update.
* buildsym.c (add_symbol_to_list): Update.
* dwarf2read.c (read_variable): Update.
(new_symbol): Update.
* jit.c (finalize_symtab): Update.
* language.c (language_alloc_type_symbol): Update.
* symtab.c (fixup_symbol_section): Update.
(initialize_objfile_symbol_1): Move code to...
(initialize_objfile_symbol): ...here. Remove now-unnecessary memset.
(allocate_symbol): Update.
(allocate_template_symbol): Update.
(get_symbol_address): Update.
* symtab.h (struct symbol): Inherit from general_symbol_info instead
of having as a field, and add a constructor.
(SYMBOL_VALUE): Update.
(SYMBOL_VALUE_ADDRESS): Update.
(SET_SYMBOL_VALUE_ADDRESS): Update.
(SYMBOL_VALUE_BYTES): Update.
(SYMBOL_VALUE_COMMON_BLOCK): Update.
(SYMBOL_BLOCK_VALUE): Update.
(SYMBOL_VALUE_CHAIN): Update.
(SYMBOL_LANGUAGE): Update.
(SYMBOL_SECTION): Update.
(SYMBOL_OBJ_SECTION): Update.
(SYMBOL_SET_LANGUAGE): Update.
(SYMBOL_SET_LINKAGE_NAME): Update.
(SYMBOL_SET_NAMES): Update.
(SYMBOL_NATURAL_NAME): Update.
(SYMBOL_LINKAGE_NAME): Update.
(SYMBOL_DEMANGLED_NAME): Update.
(SYMBOL_SEARCH_NAME): Update.
(SYMBOL_MATCHES_SEARCH_NAME): Update.
(struct symbol): Update.
(struct template_symbol): Update.
(struct rust_vtable_symbol): Update.
* xcoffread.c (SYMBOL_DUP): Update.
Change-Id: I05b1628455bcce3efaa101e65ef051708d17eb07
Tom Tromey [Wed, 9 Oct 2019 02:06:09 +0000 (20:06 -0600)]
Consolidate setting of current_layout
Currently several functions in tui-layout.c set current_layout after
their work is done. This moves this assignment to show_layout,
instead.
gdb/ChangeLog
2019-11-12 Tom Tromey <tom@tromey.com>
* tui/tui-layout.c (show_layout): Set current_layout.
(show_source_disasm_command, show_data)
(show_source_or_disasm_and_command): Don't set current_layout.
Change-Id: Id8b23797d68e607f0fcd6d29b8801869d40d1869
Tom Tromey [Tue, 8 Oct 2019 21:44:18 +0000 (15:44 -0600)]
Move _initialize_tui_layout to end of file
This moves _initialize_tui_layout to the end of the file, conforming
to the typical gdb style.
gdb/ChangeLog
2019-11-12 Tom Tromey <tom@tromey.com>
* tui/tui-layout.c (_initialize_tui_layout): Move to end.
Change-Id: I667f741b44b2bc470878a36f093a96d89fa31893
Tom Tromey [Fri, 16 Aug 2019 21:16:12 +0000 (15:16 -0600)]
Make TUI resizing tests more robust
As Sergio pointed out, the TUI resizing tests are flaky. Debugging
this showed three main problems.
1. expect's "stty" command processes its arguments one-by-one. So,
rather than requesting a single resize, it sends two separate resize
requests (one for rows and one for columns). This means gdb sees two
SIGWINCH signals and resizes the terminal twice.
I consider this a bug in expect, but I couldn't readily see how to
report a bug; and anyway the fix wouldn't propagate very quickly.
This patch works around this problem by explicitly doing two separate
resizes (so it will be robust if expect ever does change); and then by
waiting for each resize to complete before continuing.
2. gdb uses curses to drive the console rendering. Currently the test
suite looks for terminal text insertion sequences to decide when a
command has completed. However, it turns out that, sometimes, curses
can output things in non-obvious ways. I didn't debug into curses but
I guess this can happen due to output optimizations. No matter the
reason, sometimes the current approach of only tracking text
insertions is not enough to detect that gdb has finished rendering.
This patch fixes this problem by arranging to detect the termination
output after any curses command, not just insertion.
3. Detecting when a resize has completed is tricky. In fact, I could
not find a way to reliably do this.
This patch fixes this problem by adding a special maint
"tui-resize-message" setting to gdb. When this is enabled, gdb will
print a message after each SIGWINCH has been fully processed. The
test suite enables this mode and then waits for the message in order
to know when control can be returned to the calling test.
This patch also adds a timeout, to avoid the situation where the
terminal code fails to notice a change for some reason. This lets the
test at least try to continue.
gdb/ChangeLog
2019-11-12 Tom Tromey <tom@tromey.com>
* tui/tui-win.c (resize_message): New global.
(show_tui_resize_message): New function.
(tui_async_resize_screen): Print message if requested.
(_initialize_tui_win): Add tui-resize-message setting.
* NEWS: Add entry for new commands.
gdb/doc/ChangeLog
2019-11-12 Tom Tromey <tom@tromey.com>
* gdb.texinfo (Maintenance Commands): Document new command.
gdb/testsuite/ChangeLog
2019-11-12 Tom Tromey <tom@tromey.com>
* lib/tuiterm.exp (_accept): Add wait_for parameter. Check output
after any command. Expect prompt after WAIT_FOR is seen.
(enter_tui): Enable resize messages.
(command): Expect command in output.
(get_line): Avoid error when cursor appears to be off-screen.
(dump_screen): Include screen size in title.
(_do_resize): New proc, from "resize".
(resize): Rewrite. Do resize in two steps.
* gdb.tui/empty.exp (layouts): Fix entries.
(check_boxes): Remove xfail.
(check_text): Dump screen on failure.
Change-Id: I420e0259cb99b21adcd28f671b99161eefa7a51d
Mihail Ionescu [Tue, 12 Nov 2019 13:57:20 +0000 (13:57 +0000)]
[gas][arm] Enable VLDM, VSTM, VPUSH, VPOP for MVE
This patch enables a few instructions for Armv8.1-M MVE. Currently VLDM,
VSTM, VSTR, VLDR, VPUSH and VPOP are enabled only when the Armv8-M
Floating-point Extension is enabled. According to the ARMv8.1-M ARM,
section A.1.4.2[1], they can be enabled by having "Armv8-M Floating-point
Extension and/or Armv8.1-M MVE".
[1]https://developer.arm.com/docs/ddi0553/bh/armv81-m-architecture-reference-manual
2019-11-12 Mihail Ionescu <mihail.ionescu@arm.com>
* config/tc-arm.c (do_vfp_nsyn_push): Move in order to enable it for
both fpu_vfp_ext_v1xd and mve_ext and add call to the aliased vstm
instruction for mve_ext.
(do_vfp_nsyn_pop): Move in order to enable it for both
fpu_vfp_ext_v1xd and mve_ext and add call to the aliased vldm
instruction for mve_ext.
(do_neon_ldm_stm): Add fpu_vfp_ext_v1 and mve_ext checks.
(insns): Enable vldm, vldmia, vldmdb, vstm, vstmia, vstmdb, vpop,
vpush, and fldd, fstd, flds, fsts for arm_ext_v6t2 instead
of fpu_vfp_ext_v1xd.
* testsuite/gas/arm/v8_1m-mve.s: New.
* testsuite/gas/arm/v8_1m-mve.d: New.
Mihail Ionescu [Tue, 12 Nov 2019 13:55:37 +0000 (13:55 +0000)]
[binutils][arm] Update the decoding of MVE VMOV, VMVN
This patch updates the decoding of the VMOV and VMVN instructions which depend on cmode.
Previously VMOV and VMVN with cmode 1101 were not allowed.
The cmode changes also required updating of the MVE conflict checking.
Now instructions with opcodes 0xef800d50 and 0xef800e70 correctly get decoded as VMOV
and VMVN, respectively.
2019-11-12 Mihail Ionescu <mihail.ionescu@arm.com>
* opcodes/arm-dis.c (mve_opcodes): Enable VMOV imm to vec with
cmode 1101.
(is_mve_encoding_conflict): Update cmode conflict checks for
MVE_VMVN_IMM.
2019-11-12 Mihail Ionescu <mihail.ionescu@arm.com>
* gas/config/tc-arm.c (do_neon_mvn): Allow mve_ext cmode=0xd.
* testsuite/gas/arm/mve-vmov-vmvn-vorr-vbic.s: New test.
* testsuite/gas/arm/mve-vmov-vmvn-vorr-vbic.d: Likewise.
Mihail Ionescu [Tue, 12 Nov 2019 13:53:06 +0000 (13:53 +0000)]
[gas][arm] Make .fpu reset the FPU/Coprocessor feature bits
This patch is fixes the '.fpu' behaviour.
Currently, using '.fpu' resets the previously selected '.fpu' options (by overwriting them),
but does not reset previous FPU options selected by other means (ie. when using
'.arch_extension fp' in conjunction with '.fpu <x>', the FPU is not reset).
Example:
.arch armv8-a @ SET BASE
.arch_extension fp @ ADD FP-ARMV8
.fpu vfpv2 @ ADD (already existing bits, does not reset)
vfms.f32 s0, s1, s2 @ OK
.arch armv8-a @ RESET
.fpu fp-armv8 @ ADD FP-ARMV8
vfms.f32 s0, s1, s2 @ OK
.fpu vfpv2 @ RESET to VFPV2
vfms.f32 s0, s1, s2 @ ERROR
After the patch this becomes:
.arch armv8-a @ SET BASE
.arch_extension fp @ ADD FP-ARMV8
.fpu vfpv2 @ RESET TO VFPV2
vfms.f32 s0, s1, s2 @ ERROR
.arch armv8-a @ RESET
.fpu fp-armv8 @ ADD FP-ARMV8
vfms.f32 s0, s1, s2 @ OK
.fpu vfpv2 @ RESET to VFPV2
vfms.f32 s0, s1, s2 @ ERROR
gas/ChangeLog:
2019-11-11 Mihail Ionescu <mihail.ionescu@arm.com>
* config/tc-arm.c (s_arm_fpu): Clear selected_cpu fpu bits.
(fpu_any): Remove OBJ_ELF guards.
* gas/testsuite/gas/arm/fpu-rst.s: New.
* gas/testsuite/gas/arm/fpu-rst.d: New.
* gas/testsuite/gas/arm/fpu-rst.l: New.
Jan Beulich [Tue, 12 Nov 2019 08:09:31 +0000 (09:09 +0100)]
x86: fold EsSeg into IsString
EsSeg (a per-operand bit) is used with IsString (a per-insn attribute)
only. Extend the attribute to 2 bits, thus allowing to encode
- not a string insn,
- string insn with neither operand requiring use of %es:,
- string insn with 1st operand requiring use of %es:,
- string insn with 2nd operand requiring use of %es:,
which covers all possible cases, allowing to drop EsSeg.
The (transient) need to comment out the OTUnused #define did uncover an
oversight in the earlier OTMax -> OTNum conversion, which is being taken
care of here.
Jan Beulich [Tue, 12 Nov 2019 08:08:32 +0000 (09:08 +0100)]
x86: eliminate ImmExt abuse
Drop the remaining instances left in place by commit
c3949f432f ("x86:
limit ImmExt abuse), now that we have a way to specify specific GPRs.
Take the opportunity and also introduce proper 16-bit forms of
applicable SVME insns as well as 1-operand forms of CLZERO.
Jan Beulich [Tue, 12 Nov 2019 08:07:34 +0000 (09:07 +0100)]
x86: introduce operand type "instance"
Special register "class" instances can't be combined with one another
(neither in templates nor in register entries), and hence it is not a
good use of resources (memory as well as execution time) to represent
them as individual bits of a bit field.
Furthermore the generalization becoming possible will allow
improvements to the handling of insns accepting only individual
registers as their operands.
GDB Administrator [Tue, 12 Nov 2019 00:00:28 +0000 (00:00 +0000)]
Automatic date update in version.in
Tom Tromey [Sat, 9 Nov 2019 18:54:39 +0000 (11:54 -0700)]
Document and extend readline-bindable functions
This adds readline-bindable function names to a few gdb functions that
already had key bindings. This lets users change the bindings.
This also removes the gdb-command function. Due to how this function
is implemented, it doesn't make sense to allow binding it.
Finally, this updates the documentation to reflect these changes.
gdb/ChangeLog
2019-11-11 Tom Tromey <tom@tromey.com>
* tui/tui.c (tui_initialize_readline): Add new bindable readline
functions.
gdb/doc/ChangeLog
2019-11-11 Tom Tromey <tom@tromey.com>
* gdb.texinfo (TUI Keys): Document readline function names.
Change-Id: I2233779b7aefe372f19bd03c8f325733c3385e72
Tom Tromey [Sat, 9 Nov 2019 18:38:05 +0000 (11:38 -0700)]
Document operate-and-get-next
This adds some documentation for the operate-and-get-next readline
function that gdb supplies. The text is largely taken from the Bash
manual.
gdb/doc/ChangeLog
2019-11-11 Tom Tromey <tom@tromey.com>
* gdb.texinfo (Editing): Document operate-and-get-next.
Change-Id: I9adb16d9ce84bfbda5fe8a2828f668ea878c080c
Christian Biesinger [Sat, 2 Nov 2019 18:16:09 +0000 (13:16 -0500)]
Use getpwuid_r instead of getpwuid
gdb/ChangeLog:
2019-11-11 Christian Biesinger <cbiesinger@google.com>
* nat/linux-osdata.c (user_from_uid): Use getpwuid_r.
Change-Id: I587359267f8963ef1da6ba0223a1525807a721de
Tom Tromey [Mon, 11 Nov 2019 19:45:35 +0000 (12:45 -0700)]
Fix typo in vFile:pwrite documentation
A user on irc noticed that the remote protocol documentation mentioned
"vFile:write" -- but this is a typo, there is only "vFile:pwrite".
This patch fixes the bug. Tested by rebuilding, committing as
obvious.
gdb/doc/ChangeLog
2019-11-11 Tom Tromey <tromey@adacore.com>
* gdb.texinfo (Host I/O Packets): Fix typo in "vFile:pwrite".
Change-Id: I2f668a691eed7883ba6bc092471739f44c82301b
Jan Beulich [Mon, 11 Nov 2019 12:28:35 +0000 (13:28 +0100)]
Arm64: SVE2's smaxp/sminp require operands 1 and 3 to be the same register
This is just like for their umaxp/uminp and fmaxp/fminp counterparts.
Jan Beulich [Mon, 11 Nov 2019 12:27:47 +0000 (13:27 +0100)]
Arm64: fix build with old glibc
Some old glibc versions have string.h surface "index", which some
compilers then warn about if shadowed by a local variable. Re-use an
existing variable instead.
Miguel Saldivar [Sun, 10 Nov 2019 08:04:25 +0000 (00:04 -0800)]
PR24996, Gold fix for ternary operator within linker scripts
PR 24996
* expression.cc (Trinary_expression::arg2_value): Use correct integer
expression when calling "eval_maybe_dot" method.
(Trinary_expression::arg3_value): Likewise.
GDB Administrator [Mon, 11 Nov 2019 00:00:24 +0000 (00:00 +0000)]
Automatic date update in version.in
Andrew Burgess [Tue, 15 Oct 2019 15:18:26 +0000 (16:18 +0100)]
gdb/python: Introduce gdb.lookup_static_symbols
If gdb.lookup_static_symbol is going to return a single symbol then it
makes sense (I think) for it to return a context sensitive choice of
symbol, that is the global static symbol that would be visible to the
program at that point.
However, if the user of the python API wants to instead get a
consistent set of global static symbols, no matter where they stop,
then they have to instead consider all global static symbols with a
given name - there could be many. That is what this new API function
offers, it returns a list (possibly empty) of all global static
symbols matching a given name (and optionally a given symbol domain).
gdb/ChangeLog:
* python/py-symbol.c (gdbpy_lookup_static_symbols): New
function.
* python/python-internal.h (gdbpy_lookup_static_symbols):
Declare new function.
* python/python.c (python_GdbMethods): Add
gdb.lookup_static_symbols method.
* NEWS: Mention gdb.lookup_static_symbols.
gdb/testsuite/ChangeLog:
* gdb.python/py-symbol.exp: Add test for
gdb.lookup_static_symbols.
gdb/doc/ChangeLog:
* python.texi (Symbols In Python): Add documentation for
gdb.lookup_static_symbols.
Change-Id: I1153b0ae5bcbc43b3dcf139043c7a48bf791e1a3
Andrew Burgess [Mon, 23 Sep 2019 15:59:08 +0000 (16:59 +0100)]
gdb/python: smarter symbol lookup for gdb.lookup_static_symbol
When using gdb.lookup_static_symbol I think that GDB should find
static symbols (global symbol with static linkage) from the current
object file ahead of static symbols from other object files.
This means that if we have two source files f1.c and f2.c, and both
files contains 'static int foo;', then when we are stopped in f1.c a
call to 'gdb.lookup_static_symbol ("foo")' will find f1.c::foo, and if
we are stopped in f2.c we would find 'f2.c::foo'.
Given that gdb.lookup_static_symbol always returns a single symbol,
but there can be multiple static symbols with the same name GDB is
always making a choice about which symbols to return. I think that it
makes sense for the choice GDB makes in this case to match what a user
would get on the command line if they asked to 'print foo'.
gdb/testsuite/ChangeLog:
* gdb.python/py-symbol.c: Declare and call function from new
py-symbol-2.c file.
* gdb.python/py-symbol.exp: Compile both source files, and add new
tests for gdb.lookup_static_symbol.
* gdb.python/py-symbol-2.c: New file.
gdb/doc/ChangeLog:
* python.texi (Symbols In Python): Extend documentation for
gdb.lookup_static_symbol.
gdb/ChangeLog:
* python/py-symbol.c (gdbpy_lookup_static_symbol): Lookup in
static block of current object file first. Also fix typo in
header comment.
Change-Id: Ie55dbeb8806f35577b46015deecde27a0ca2ab64
Andrew Burgess [Fri, 8 Nov 2019 16:18:43 +0000 (16:18 +0000)]
gdb: Add a class to track last display symtab and line information
In stack.c we currently have a set of static global variables to track
the last displayed symtab and line. This commit moves all of these
into a class and adds an instance of the class to track the same
information.
The API into stack.c is unchanged after this cleanup.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* stack.c (set_last_displayed_sal): Delete.
(last_displayed_sal_valid): Delete.
(last_displayed_pspace): Delete.
(last_displayed_addr): Delete.
(last_displayed_symtab): Delete.
(last_displayed_line): Delete.
(class last_displayed_symtab_info_type): New.
(last_displayed_symtab_info): New static global variable.
(print_frame_info): Call methods on last_displayed_symtab_info.
(clear_last_displayed_sal): Update header comment, and make use of
last_displayed_symtab_info.
(last_displayed_sal_is_valid): Likewise.
(get_last_displayed_pspace): Likewise.
(get_last_displayed_addr): Likewise.
(get_last_displayed_symtab): Likewise.
(get_last_displayed_line): Likewise.
(get_last_displayed_sal): Likewise.
* stack.h (clear_last_displayed_sal): Update header comment.
(last_displayed_sal_is_valid): Likewise.
(get_last_displayed_pspace): Likewise.
(get_last_displayed_addr): Likewise.
(get_last_displayed_symtab): Likewise.
(get_last_displayed_line): Likewise.
(get_last_displayed_sal): Likewise.
Change-Id: Ia3dbfe267feec03108c5c8ed8bd94fc0a030c3ed
Andrew Burgess [Fri, 8 Nov 2019 15:15:29 +0000 (15:15 +0000)]
gdb: Convert frame_show_address to return a bool
Just a clean up, should be no user visible changes after this commit.
gdb/ChangeLog:
* stack.c (frame_show_address): Convert return type to bool.
* stack.h (frame_show_address): Likewise, and update header
comment.
Change-Id: Iaaa9ebd4ff6534db19c5329f1c604932c747bd7f
Andrew Burgess [Fri, 8 Nov 2019 23:39:14 +0000 (23:39 +0000)]
gdb_vecs.h: Avoid self move assign
While working on another patch I ran into an issue with
unordered_remove (in gdb_vecs.h), where removing the last item of the
vector can cause a self move assign.
When compiling the C++ standard library in debug mode (with
-D_GLIBCXX_DEBUG=1) this causes an error to trigger.
I've fixed the issue in this patch and provided a unit test.
The provided unit test includes an assignment operator which checks
for self move assign, this removes the need to compile with
-D_GLIBCXX_DEBUG=1 in order to spot the bug. If you're keen to see
the error reported from the C++ standard library then remove operator=
from the unit test and recompile GDB with -D_GLIBCXX_DEBUG=1.
gdb/ChangeLog:
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add new file to the list.
* unittests/vec-utils-selftests.c: New file.
* gdbsupport/gdb_vecs.h (unordered_remove): Avoid self move assign.
Change-Id: I80247b20cd5212038117db7412865f5e6a9257cd
Tom Tromey [Sun, 10 Nov 2019 17:33:07 +0000 (10:33 -0700)]
Remove can_highlight from TUI windows
Each TUI window has a "can_highlight" member. However, this has the
same meaning as "can_box" -- a window can be highlighted if and only
if it can be boxed. So, this patch removes can_highlight in favor of
simply using can_box.
gdb/ChangeLog
2019-11-10 Tom Tromey <tom@tromey.com>
* tui/tui-wingeneral.c (tui_unhighlight_win): Use can_box.
(tui_highlight_win): Likewise.
(tui_win_info::check_and_display_highlight_if_needed): Likewise.
* tui/tui-data.h (struct tui_win_info) <can_highlight>: Remove.
* tui/tui-command.h (struct tui_cmd_window) <tui_cmd_window>:
Don't set can_highlight.
Change-Id: I35916859070efcdfcc6e692c71cc6070956dcfce
Tom Tromey [Sun, 10 Nov 2019 16:48:42 +0000 (09:48 -0700)]
Remove unused constructor declaration from cli_style_option
I noticed that cli_style_option declares a constructor that is never
defined. This removes it.
gdb/ChangeLog
2019-11-10 Tom Tromey <tom@tromey.com>
* cli/cli-style.h (class cli_style_option) <cli_style_option>:
Remove unused declaration.
Change-Id: Ic59ec7eab4d7183d9392b58709354b2d4449b7be
GDB Administrator [Sun, 10 Nov 2019 00:01:10 +0000 (00:01 +0000)]
Automatic date update in version.in
GDB Administrator [Sat, 9 Nov 2019 00:00:20 +0000 (00:00 +0000)]
Automatic date update in version.in
H.J. Lu [Fri, 8 Nov 2019 17:31:06 +0000 (09:31 -0800)]
i386: Only check suffix in instruction mnemonic
We should check suffix in instruction mnemonic when matching instruction.
In Intel syntax, normally we check for memory operand size. But the same
mnemonic with 2 different encodings can have the same memory operand
size and i.suffix is set to LONG_DOUBLE_MNEM_SUFFIX from memory operand
size in Intel syntax to distinguish them. When there is no suffix in
mnemonic, we check LONG_DOUBLE_MNEM_SUFFIX in i.suffix for mnemonic
suffix.
gas/
PR gas/25167
* config/tc-i386.c (match_template): Don't check instruction
suffix set from operand.
* testsuite/gas/i386/code16.d: New file.
* testsuite/gas/i386/code16.s: Likewise.
* testsuite/gas/i386/i386.exp: Run code16.
* testsuite/gas/i386/x86-64-branch-4.l: Updated.
opcodes/
PR gas/25167
* i386-opc.tbl: Remove IgnoreSize from cmpsd and movsd.
* i386-tbl.h: Regenerated.
Tom Tromey [Tue, 22 Oct 2019 19:32:39 +0000 (13:32 -0600)]
Constify command_line_input
This changes command_line_input to return a "const char *", which is
appropriate because the memory is owned by command_line_input. Then
it fixes up the users.
I looked at making command_line_input transfer ownership to its caller
instead, but this is complicated due to the way read_next_line is
called, so I decided against it.
Tested by rebuilding.
gdb/ChangeLog
2019-11-08 Tom Tromey <tromey@adacore.com>
* top.c (read_command_file): Update.
(command_line_input): Make return type const.
* python/py-gdb-readline.c: Update.
* linespec.c (decode_line_2): Update.
* defs.h (command_line_input): Make return type const.
* cli/cli-script.c (read_next_line): Make return type const.
* ada-lang.c (get_selections): Update.
Change-Id: I27e6c9477fd1005ab5b16e0d337e4c015b6e6248
Alan Modra [Fri, 8 Nov 2019 10:27:07 +0000 (20:57 +1030)]
Revert "GENERATE_SHLIB_SCRIPT vs. EMBEDDED."
This reverts commit
f2aaebdb97977ee7a5c83c02af871e758e7d594b.
My reasons for making that change were just plain wrong.
Jan Beulich [Fri, 8 Nov 2019 08:06:24 +0000 (09:06 +0100)]
x86: convert RegMask and RegBND from bitfield to enumerator
This is to further shrink the operand type representation.
Jan Beulich [Fri, 8 Nov 2019 08:05:36 +0000 (09:05 +0100)]
x86: convert RegSIMD and RegMMX from bitfield to enumerator
This is to further shrink the operand type representation.
Jan Beulich [Fri, 8 Nov 2019 08:04:53 +0000 (09:04 +0100)]
x86: convert Control/Debug/Test from bitfield to enumerator
This is to further shrink the operand type representation.
Jan Beulich [Fri, 8 Nov 2019 08:04:09 +0000 (09:04 +0100)]
x86: convert SReg from bitfield to enumerator
This is to further shrink the operand type representation.
Jan Beulich [Fri, 8 Nov 2019 08:03:23 +0000 (09:03 +0100)]
x86: introduce operand type "class"
Many operand types, in particular the various kinds of registers, can't
be combined with one another (neither in templates nor in register
entries), and hence it is not a good use of resources (memory as well as
execution time) to represent them as individual bits of a bit field.
Alan Modra [Fri, 8 Nov 2019 03:32:05 +0000 (14:02 +1030)]
PR25172, Wrong description of --stop-address=ADDR switch
PR 25172
* objdump.c (usage): Correct --stop-address description.
GDB Administrator [Fri, 8 Nov 2019 00:00:14 +0000 (00:00 +0000)]
Automatic date update in version.in
Matthew Malcomson [Thu, 7 Nov 2019 17:22:45 +0000 (17:22 +0000)]
[gas][aarch64] Add the v8.6 Data Gathering Hint mnemonic [10/X]
Hi,
This patch is part of a series that adds support for Armv8.6-A
to binutils.
In this last patch, the new Data Gathering Hint mnemonic is introduced.
Committed on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* testsuite/gas/aarch64/dgh.s: New test.
* testsuite/gas/aarch64/dgh.d: New test.
opcodes/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* opcodes/aarch64-tbl.h (V8_6_INSN): New macro for v8.6 instructions.
(aarch64_opcode_table): Add data gathering hint mnemonic.
* opcodes/aarch64-dis-2.c: Account for new instruction.
Is it ok for trunk?
Regards,
Mihail
Matthew Malcomson [Thu, 7 Nov 2019 17:20:08 +0000 (17:20 +0000)]
[Patch][binutils][arm] Armv8.6-A Matrix Multiply extension [9/10]
Hi,
This patch is part of a series that adds support for Armv8.6-A
(Matrix Multiply and BFloat16 extensions) to binutils.
This patch introduces the Matrix Multiply (Int8, F32, F64) extensions
to the arm backend.
The following Matrix Multiply instructions are added: vummla, vsmmla,
vusmmla, vusdot, vsudot[1].
[1]https://developer.arm.com/docs/ddi0597/latest/simd-and-floating-point-instructions-alphabetic-order
Committed on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* config/tc-arm.c (arm_ext_i8mm): New feature set.
(do_vusdot): New.
(do_vsudot): New.
(do_vsmmla): New.
(do_vummla): New.
(insns): Add vsmmla, vummla, vusmmla, vusdot, vsudot mnemonics.
(armv86a_ext_table): Add i8mm extension.
(arm_extensions): Move bf16 extension to context sensitive table.
(armv82a_ext_table, armv84a_ext_table, armv85a_ext_table):
Move bf16 extension to context sensitive table.
(armv86a_ext_table): Add i8mm extension.
* doc/c-arm.texi: Document i8mm extension.
* testsuite/gas/arm/i8mm.s: New test.
* testsuite/gas/arm/i8mm.d: New test.
* testsuite/gas/arm/bfloat17-cmdline-bad-3.d: Update test.
include/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* opcode/arm.h (ARM_EXT2_I8MM): New feature macro.
opcodes/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* arm-dis.c (neon_opcodes): Add i8mm SIMD instructions.
Regression tested on arm-none-eabi.
Is this ok for trunk?
Regards,
Mihail
Matthew Malcomson [Thu, 7 Nov 2019 17:10:01 +0000 (17:10 +0000)]
[binutils][aarch64] Matrix Multiply extension enablement [8/X]
Hi,
This patch is part of a series that adds support for Armv8.6-A
(Matrix Multiply and BFloat16 extensions) to binutils.
This patch introduces the Matrix Multiply (Int8, F32, F64) extensions
to the aarch64 backend.
The following instructions are added: {s/u}mmla, usmmla, {us/su}dot,
fmmla, ld1rob, ld1roh, d1row, ld1rod, uzip{1/2}, trn{1/2}.
Committed on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* config/tc-aarch64.c: Add new arch fetures to suppport the mm extension.
(parse_operands): Add new operand.
* testsuite/gas/aarch64/i8mm.s: New test.
* testsuite/gas/aarch64/i8mm.d: New test.
* testsuite/gas/aarch64/f32mm.s: New test.
* testsuite/gas/aarch64/f32mm.d: New test.
* testsuite/gas/aarch64/f64mm.s: New test.
* testsuite/gas/aarch64/f64mm.d: New test.
* testsuite/gas/aarch64/sve-movprfx-mm.s: New test.
* testsuite/gas/aarch64/sve-movprfx-mm.d: New test.
include/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_I8MM): New.
(AARCH64_FEATURE_F32MM): New.
(AARCH64_FEATURE_F64MM): New.
(AARCH64_OPND_SVE_ADDR_RI_S4x32): New.
(enum aarch64_insn_class): Add new instruction class "aarch64_misc" for
instructions that do not require special handling.
opcodes/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* aarch64-tbl.h (aarch64_feature_i8mm_sve, aarch64_feature_f32mm_sve,
aarch64_feature_f64mm_sve, aarch64_feature_i8mm, aarch64_feature_f32mm,
aarch64_feature_f64mm): New feature sets.
(INT8MATMUL_INSN, F64MATMUL_SVE_INSN, F64MATMUL_INSN,
F32MATMUL_SVE_INSN, F32MATMUL_INSN): New macros to define matrix multiply
instructions.
(I8MM_SVE, F32MM_SVE, F64MM_SVE, I8MM, F32MM, F64MM): New feature set
macros.
(QL_MMLA64, OP_SVE_SBB): New qualifiers.
(OP_SVE_QQQ): New qualifier.
(INT8MATMUL_SVE_INSNC, F64MATMUL_SVE_INSNC,
F32MATMUL_SVE_INSNC): New feature set for bfloat16 instructions to support
the movprfx constraint.
(aarch64_opcode_table): Support for SVE_ADDR_RI_S4x32.
(aarch64_opcode_table): Define new instructions smmla,
ummla, usmmla, usdot, sudot, fmmla, ld1rob, ld1roh, ld1row, ld1rod
uzip{1/2}, trn{1/2}.
* aarch64-opc.c (operand_general_constraint_met_p): Handle
AARCH64_OPND_SVE_ADDR_RI_S4x32.
(aarch64_print_operand): Handle AARCH64_OPND_SVE_ADDR_RI_S4x32.
* aarch64-dis-2.c (aarch64_opcode_lookup_1, aarch64_find_next_opcode):
Account for new instructions.
* opcodes/aarch64-asm-2.c (aarch64_insert_operand): Support the new
S4x32 operand.
* aarch64-opc-2.c (aarch64_operands): Support the new S4x32 operand.
Regression tested on arm-none-eabi.
Is it ok for trunk?
Regards,
Mihail
Matthew Malcomson [Thu, 7 Nov 2019 17:07:32 +0000 (17:07 +0000)]
[Patch][binutils][aarch64] .bfloat16 directive for AArch64 [7/10]
Hi,
This patch is part of a series that adds support for Armv8.6-A
(Matrix Multiply and BFloat16 extensions) to binutils.
This patch implements the '.bfloat' directive for the AArch64 backend.
The syntax for the directive is:
.bfloat16 <0-n numbers>
e.g.
.bfloat16 12.0
.bfloat16 0.123, 1.0, NaN, 5
This is implemented by utilizing the ieee_atof_detail function in order
to encode the slightly
different bfloat16 format.
Added testcases to verify the correct encoding for various bfloat16
values (NaN, Infinity (+ & -), normals, subnormals etc...).
Cross compiled and tested on aarch64-none-elf and aarch64-none-linux-gnu
with no issues.
Committed on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-10-29 Mihail Ionescu <mihail.ionescu@arm.com>
2019-10-29 Barnaby Wilks <barnaby.wilks@arm.com>
* config/tc-aarch64.c (md_atof): Add encoding for the bfloat16 format.
* testsuite/gas/aarch64/bfloat16-directive-le.d: New test.
* testsuite/gas/aarch64/bfloat16-directive-be.d: New test.
* testsuite/gas/aarch64/bfloat16-directive.s: New test.
Is it ok for trunk?
Regards,
Mihail
Matthew Malcomson [Thu, 7 Nov 2019 17:03:54 +0000 (17:03 +0000)]
[Patch][binutils][arm] .bfloat16 directive for Arm [6/X]
Hi,
This patch is part of a series that adds support for Armv8.6-A
(Matrix Multiply and BFloat16 extensions) to binutils.
This patch implements the '.bfloat16' directive for the Arm backend.
The syntax for the directive is:
.bfloat16 <0-n numbers>
e.g.
.bfloat16 12.0
.bfloat16 0.123, 1.0, NaN, 5
This is implemented by utilizing the ieee_atof_detail function (included
in the previous patch) in order to encode the slightly different
bfloat16 format.
Added testcases to verify the correct encoding for various bfloat16
values (NaN, Infinity (+ & -), normals, subnormals etc...).
Cross compiled and tested on arm-none-eabi and arm-none-linux-gnueabihf
with no issues.
Committed on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-10-21 Mihail Ionescu <mihail.ionescu@arm.com>
2019-10-21 Barnaby Wilks <barnaby.wilks@arm.com>
* config/tc-arm.c (md_atof): Add encoding for bfloat16
* testsuite/gas/arm/bfloat16-directive-le.d: New test.
* testsuite/gas/arm/bfloat16-directive-be.d: New test.
* testsuite/gas/arm/bfloat16-directive.s: New test.
Is it ok for trunk?
Regards,
Mihail
Matthew Malcomson [Thu, 7 Nov 2019 17:01:04 +0000 (17:01 +0000)]
[Patch][binutils] Generic support for parsing numbers in bfloat16 format [5/X]
Hi,
This patch is part of a series that adds support for Armv8.6-A
(Matrix Multiply and BFloat16 extensions).
This patch contains some general refactoring of the atof_ieee
function, exposing a function that allows a higher level of control
over the format of IEEE-like floating point numbers.
This has been done in order to be able to add a directive for assembling
floating point literals in the bfloat16 format in the following patches.
Committed on behalf of Mihail Ionescu.
Tested on arm-none-eabi, arm-none-linux-gnueabihf, aarch64-none-elf
and aarch64-none-linux-gnuwith no issues.
gas/ChangeLog:
2019-10-21 Mihail Ionescu <mihail.ionescu@arm.com>
2019-10-21 Barnaby Wilks <barnaby.wilks@arm.com>
* as.h (atof_ieee_detail): Add prototype for atof_ieee_detail function.
(atof_ieee): Move some code into the atof_ieee_detail function.
(atof_ieee_detail): Add function that provides a higher level of control over generating
IEEE-like numbers.
Is it ok for trunk?
Regards,
Mihail
Matthew Malcomson [Thu, 7 Nov 2019 16:56:12 +0000 (16:56 +0000)]
[binutils][arm] BFloat16 enablement [4/X]
Hi,
This patch is part of a series that adds support for Armv8.6-A
(Matrix Multiply and BFloat16 extensions) to binutils.
This patch introduces BFloat16 instructions to the arm backend.
The following BFloat16 instructions are added: vdot, vfma{l/t},
vmmla, vfmal{t/b}, vcvt, vcvt{t/b}.
gas/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-arm.c (arm_archs): Add armv8.6-a option.
(cpu_arch_ver): Add TAG_CPU_ARCH_V8 tag for Armv8.6-a.
* doc/c-arm.texi (-march): New armv8.6-a arch.
* config/tc-arm.c (arm_ext_bf16): New feature set.
(enum neon_el_type): Add NT_bfloat value.
(B_MNEM_vfmat, B_MNEM_vfmab): New bfloat16 encoder
helpers.
(BAD_BF16): New message.
(parse_neon_type): Add bf16 type specifier.
(enum neon_type_mask): Add N_BF16 type.
(type_chk_of_el_type): Account for NT_bfloat.
(el_type_of_type_chk): Account for N_BF16.
(neon_three_args): Split out from neon_three_same.
(neon_three_same): Part split out into neon_three_args.
(CVT_FLAVOUR_VAR): Add bf16_f32 cvt flavour.
(do_neon_cvt_1): Account for vcvt.bf16.f32.
(do_bfloat_vmla): New.
(do_mve_vfma): New function to deal with the mnemonic clash between the BF16
vfmat and the MVE vfma in a VPT block with a 't'rue condition.
(do_neon_cvttb_1): Account for vcvt{t,b}.bf16.f32.
(do_vdot): New
(do_vmmla): New
(insns): Add vdot and vmmla mnemonics.
(arm_extensions): Add "bf16" extension.
* doc/c-arm.texi: Document "bf16" extension.
* testsuite/gas/arm/attr-march-armv8_6-a.d: New test.
* testsuite/gas/arm/bfloat16-bad.d: New test.
* testsuite/gas/arm/bfloat16-bad.l: New test.
* testsuite/gas/arm/bfloat16-bad.s: New test.
* testsuite/gas/arm/bfloat16-cmdline-bad-2.d: New test.
* testsuite/gas/arm/bfloat16-cmdline-bad-3.d: New test.
* testsuite/gas/arm/bfloat16-cmdline-bad.d: New test.
* testsuite/gas/arm/bfloat16-neon.s: New test.
* testsuite/gas/arm/bfloat16-non-neon.s: New test.
* testsuite/gas/arm/bfloat16-thumb-bad.d: New test.
* testsuite/gas/arm/bfloat16-thumb-bad.l: New test.
* testsuite/gas/arm/bfloat16-thumb.d: New test.
* testsuite/gas/arm/bfloat16-vfp.d: New test.
* testsuite/gas/arm/bfloat16.d: New test.
* testsuite/gas/arm/bfloat16.s: New test.
include/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/arm.h (ARM_EXT2_V8_6A, ARM_AEXT2_V8_6A,
ARM_ARCH_V8_6A): New.
* opcode/arm.h (ARM_EXT2_BF16): New feature macro.
(ARM_AEXT2_V8_6A): Include above macro in definition.
opcodes/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* arm-dis.c (select_arm_features): Update bfd_march_arm_8 with
Armv8.6-A.
(coprocessor_opcodes): Add bfloat16 vcvt{t,b}.
(neon_opcodes): Add bfloat SIMD instructions.
(print_insn_coprocessor): Add new control character %b to print
condition code without checking cp_num.
(print_insn_neon): Account for BFloat16 instructions that have no
special top-byte handling.
Regression tested on arm-none-eabi.
Is it ok for trunk?
Regards,
Mihail
Matthew Malcomson [Thu, 7 Nov 2019 16:53:40 +0000 (16:53 +0000)]
[Patch][binutils][arm] Create a new generic coprocessor array [3/10]
Hi,
This patch is part of a series that adds support for Armv8.6-A
(Matrix Multiply and BFloat16 extensions) to binutils.
Some generic instructions match a large range of encoding space (e.g.
stc, mcr, mrc).
Currently these instructions are in the coprocessor_opcodes array, which
means they are checked before many other instructions when disassembling
arm and thumb32 codes.
This patch moves the generic instructions into a separate array to be
checked later on.
This is done in order to avoid instruction conflict between the generic
instructions and newer ones -- this has already been seen with MVE, and
is also a problem with BFloat16.
One way to avoid the conflict could be to swap the search order between
coprocessor_opcodes and neon_opcodes.
We avoid this since it's a larger change that may introduce extra bugs
(that aren't caught by the testsuite).
We have decided against searching the generic array after searching the
arm specific and thumb32 specific arrays with a similar reasoning about
keeping the change small.
Regression tested with arm-none-linux-gnueabihf.
Committed on behalf of Mihail Ionescu.
opcodes/ChangeLog:
2019-10-29 Mihail Ionescu <mihail.ionescu@arm.com>
2019-10-29 Matthew Malcomson <matthew.malcomson@arm.com>
* arm-dis.c (print_insn_coprocessor,
print_insn_generic_coprocessor): Create wrapper functions around
the implementation of the print_insn_coprocessor control codes.
(print_insn_coprocessor_1): Original print_insn_coprocessor
function that now takes which array to look at as an argument.
(print_insn_arm): Use both print_insn_coprocessor and
print_insn_generic_coprocessor.
(print_insn_thumb32): As above.
Is it ok for trunk?
Regards,
Mihail
Matthew Malcomson [Thu, 7 Nov 2019 16:38:59 +0000 (16:38 +0000)]
[binutils][aarch64] Bfloat16 enablement [2/X]
Hi,
This patch is part of a series that adds support for Armv8.6-A
(Matrix Multiply and BFloat16 extensions) to binutils.
This patch introduces the following BFloat16 instructions to the
aarch64 backend: bfdot, bfmmla, bfcvt, bfcvtnt, bfmlal[t/b],
bfcvtn2.
Committed on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-aarch64.c (vectype_to_qualifier): Special case the
S_2H operand qualifier.
* doc/c-aarch64.texi: Document bf16 and bf16mmla4 extensions.
* testsuite/gas/aarch64/bfloat16.d: New test.
* testsuite/gas/aarch64/bfloat16.s: New test.
* testsuite/gas/aarch64/illegal-bfloat16.d: New test.
* testsuite/gas/aarch64/illegal-bfloat16.l: New test.
* testsuite/gas/aarch64/illegal-bfloat16.s: New test.
* testsuite/gas/aarch64/sve-bfloat-movprfx.s: New test.
* testsuite/gas/aarch64/sve-bfloat-movprfx.d: New test.
include/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_BFLOAT16): New feature macros.
(AARCH64_ARCH_V8_6): Include BFloat16 feature macros.
(enum aarch64_opnd_qualifier): Introduce new operand qualifier
AARCH64_OPND_QLF_S_2H.
(enum aarch64_insn_class): Introduce new class "bfloat16".
(BFLOAT16_SVE_INSNC): New feature set for bfloat16
instructions to support the movprfx constraint.
opcodes/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm.c (aarch64_ins_reglane): Use AARCH64_OPND_QLF_S_2H
in reglane special case.
* aarch64-dis-2.c (aarch64_opcode_lookup_1,
aarch64_find_next_opcode): Account for new instructions.
* aarch64-dis.c (aarch64_ext_reglane): Use AARCH64_OPND_QLF_S_2H
in reglane special case.
* aarch64-opc.c (struct operand_qualifier_data): Add data for
new AARCH64_OPND_QLF_S_2H qualifier.
* aarch64-tbl.h (QL_BFDOT QL_BFDOT64, QL_BFDOT64I, QL_BFMMLA2,
QL_BFCVT64, QL_BFCVTN64, QL_BFCVTN2_64): New qualifiers.
(aarch64_feature_bfloat16, aarch64_feature_bfloat16_sve,
aarch64_feature_bfloat16_bfmmla4): New feature sets.
(BFLOAT_SVE, BFLOAT): New feature set macros.
(BFLOAT_SVE_INSN, BFLOAT_BFMMLA4_INSN, BFLOAT_INSN): New macros
to define BFloat16 instructions.
(aarch64_opcode_table): Define new instructions bfdot,
bfmmla, bfcvt, bfcvtnt, bfdot, bfdot, bfcvtn, bfmlal[b/t]
bfcvtn2, bfcvt.
Regression tested on aarch64-elf.
Is it ok for trunk?
Regards,
Mihail
Matthew Malcomson [Thu, 7 Nov 2019 16:18:51 +0000 (16:18 +0000)]
[gas][aarch64] Armv8.6-a option [1/X]
Hi,
This patch is part of a series that adds support for Armv8.6-A
to binutils.
This first patch adds the Armv8.6-A flag to binutils.
No instructions are behind it at the moment.
Commited on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-aarch64.c (armv8.6-a): New arch.
* doc/c-aarch64.texi (armv8.6-a): Document new arch.
include/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_V8_6): New.
(AARCH64_ARCH_V8_6): New.
opcodes/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-tbl.h (ARMV8_6): New macro.
Is it ok for trunk?
Regards,
Mihail
Nick Clifton [Thu, 7 Nov 2019 11:56:54 +0000 (11:56 +0000)]
Allow the --output option of the "ar" prorgam to extract files to locations outside of the current directory.
* ar.c (open_output_file): Check for filename validity before
prefixing with output directory.
Display the constructed output filename if in verbose mode.
(extract_file): Let open_output_file display the filename.
Nick Clifton [Thu, 7 Nov 2019 11:36:06 +0000 (11:36 +0000)]
Fix bug merging notes with objcopy when no merging results in zeroes being written back into the note section.
* objcopy.c (copy_object): Skip note sections that do not have
an output section. Always copy note sections, even if no
changes are made.
Tom de Vries [Thu, 7 Nov 2019 09:49:56 +0000 (10:49 +0100)]
[gdb/contrib] Add words.sh script
Add a script that takes a list of files as arguments and output a list of
words from the C comments with their frequencies.
For:
...
$ ./gdb/contrib/words.sh $(find gdb -type f -name "*.c" -o -name "*.h")
...
it generates a list of ~15000 words prefixed with frequency.
This could be used to generate a dictionary that is kept as part of the
sources, against which new code can be checked, generating a warning or
error. The hope is that misspellings would trigger this frequently, and rare
words rarely, otherwise the burden of updating the dictionary would be too
much.
And for:
...
$ ./gdb/contrib/words.sh -f 1 $(find gdb -type f -name "*.c" -o -name "*.h")
...
it generates a list of ~5000 words with frequency 1.
This can be used to scan for misspellings manually.
Change-Id: I7b119c9a4519cdbf62a3243d1df2927c80813e8b
Alan Modra [Thu, 7 Nov 2019 03:02:16 +0000 (13:32 +1030)]
Remove CR16C support
I think it is past time to remove CR16C support. CR16C was added in
2004, and only for ld. gas and binutils support is lacking, and there
have been no commits to bfd/elf32-cr16c.c other than warning fixes or
global maintainers making changes to all targets. I see no maintainer
listed for CR16C, and no commits from anyone at NSC supporting the
target. Furthermore, at the time the CR16 support was added in 2007,
config.sub was changed upstream to no longer recognise cr16c as a
valid cpu. That means the CR16C ld support is only available as a
secondary target by configuring with, for example,
--enable-targets=all or --enable-targets=cr16c-unknown-elf. No
testing of the CR16C target is possible.
include/
* elf/cr16c.h: Delete.
bfd/
* cpu-cr16c.c: Delete.
* elf32-cr16c.c: Delete.
* Makefile.am,
* archures.c,
* config.bfd,
* configure.ac,
* reloc.c,
* targets.c: Remove cr16c support.
* Makefile.in,
* bfd-in2.h,
* configure,
* libbfd.h,
* po/SRC-POTFILES.in: Regenerate.
ld/
* emulparams/elf32cr16c.sh: Delete.
* scripttempl/elf32cr16c.sc: Delete.
* Makefile.am,
* configure.tgt: Remove cr16c support.
* NEWS: Mention removal of cr16c.
* Makefile.in,
* po/BLD-POTFILES.in: Regenerate.
Alan Modra [Wed, 6 Nov 2019 07:20:27 +0000 (17:50 +1030)]
Order targets in ld/configure.tgt
The target list was supposed to be more or less alphabetically sorted,
but this wasn't anywhere near the case. The comment about keeping
architecture variants together seems odd to me, and is no doubt the
reason why ix86 and x86_64 were grouped together, so I removed that
comment. The patch doesn't change order of entries for a given cpu.
* configure.tgt: Order targets by cpu.
Jan Beulich [Thu, 7 Nov 2019 08:29:14 +0000 (09:29 +0100)]
x86: support further AMD Zen2 instructions
Both RDPRU and MCOMMIT have been publicly documented meanwhile:
https://www.amd.com/system/files/TechDocs/24594.pdf.
Jan Beulich [Thu, 7 Nov 2019 08:28:20 +0000 (09:28 +0100)]
x86: adjust register names printed for MONITOR/MWAIT
As the comments (here: almost, in the opcode table: fully) correctly
state - all register operands except MONITOR's address one are fixed
at 32 bit size. Don't print 64-bit registers there.
Also adjust x86-64-suffix.d's name such that it wouldn't be identical to
x86-64-rep-suffix.d's, but instead resemble that of its sibling
x86-64-suffix-intel.d.
This page took 0.054151 seconds and 4 git commands to generate.