Hendrik Brueckner [Tue, 28 Apr 2015 13:52:44 +0000 (15:52 +0200)]
s390/crc32-vx: add crypto API module for optimized CRC-32 algorithms
Add a crypto API module to access the vector extension based CRC-32
implementations. Users can request the optimized implementation through
the shash crypto API interface.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Hendrik Brueckner [Tue, 28 Apr 2015 10:29:06 +0000 (12:29 +0200)]
s390/crc32-vx: use vector instructions to optimize CRC-32 computation
Use vector instructions to optimize the computation of CRC-32 checksums.
An optimized version is provided for CRC-32 (IEEE 802.3 Ethernet) in
normal and bitreflected domain, as well as, for bitreflected CRC-32C
(Castagnoli).
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Hendrik Brueckner [Wed, 18 Feb 2015 13:46:00 +0000 (14:46 +0100)]
s390/vx: add support functions for in-kernel FPU use
Introduce the kernel_fpu_begin() and kernel_fpu_end() function
to enclose any in-kernel use of FPU instructions and registers.
In enclosed sections, you can perform floating-point or vector
(SIMD) computations. The functions take care of saving and
restoring FPU register contents and controls.
For usage details, see the guidelines in arch/s390/include/asm/fpu/api.h
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Tue, 14 Jun 2016 04:55:43 +0000 (06:55 +0200)]
s390/mm: fix compile for PAGE_DEFAULT_KEY != 0
The usual problem for code that is ifdef'ed out is that it doesn't
compile after a while. That's also the case for the storage key
initialisation code, if it would be used (set PAGE_DEFAULT_KEY to
something not zero):
./arch/s390/include/asm/page.h: In function 'storage_key_init_range':
./arch/s390/include/asm/page.h:36:2: error: implicit declaration of function '__storage_key_init_range'
Since the code itself has been useful for debugging purposes several
times, remove the ifdefs and make sure the code gets compiler
coverage. The cost for this is eight bytes.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Wed, 25 May 2016 07:53:07 +0000 (09:53 +0200)]
s390/topology: remove z10 special handling
I don't have a z10 to test this anymore, so I have no idea if the code
works at all or even crashes. I can try to emulate, but it is just
guess work.
Nor do we know if the z10 special handling is performance wise still
better than the generic handling. There have been a lot of changes to
the scheduler.
Therefore let's play safe and remove the special handling.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Wed, 25 May 2016 08:25:50 +0000 (10:25 +0200)]
s390/topology: add drawer scheduling domain level
The z13 machine added a fourth level to the cpu topology
information. The new top level is called drawer.
A drawer contains two books, which used to be the top level.
Adding this additional scheduling domain did show performance
improvements for some workloads of up to 8%, while there don't
seem to be any workloads impacted in a negative way.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Sat, 21 May 2016 09:10:13 +0000 (11:10 +0200)]
topology/sysfs: provide drawer id and siblings attributes
The s390 cpu topology gained another hierarchy level. The top level is
now called drawer and contains several books. A book used to be the
top level.
In order to expose the cpu topology to user space allow to create new
sysfs attributes dependent on CONFIG_SCHED_DRAWER which an
architecture may define and select.
These additional attributes will be available:
/sys/devices/system/cpu/cpuX/topology/drawer_id
/sys/devices/system/cpu/cpuX/topology/drawer_siblings
/sys/devices/system/cpu/cpuX/topology/drawer_siblings_list
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Sat, 11 Jun 2016 09:24:27 +0000 (11:24 +0200)]
s390/ipl: rename diagnose enums
Rename DIAG308_IPL and DIAG308_DUMP to DIAG308_LOAD_CLEAR and
DIAG308_LOAD_NORMAL_DUMP to better reflect the associated IPL
functions.
Suggested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Suggested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Fri, 10 Jun 2016 10:36:50 +0000 (12:36 +0200)]
s390/ipl: use load normal for LPAR re-ipl
Avoid clearing memory for CCW-type re-ipl within a logical
partition. This can save a significant amount of time if a logical
partition contains a lot of memory.
On the other hand we still clear memory if running within a second
level hypervisor, since the hypervisor can simply free all memory that
was used for the guest.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Fri, 10 Jun 2016 07:57:05 +0000 (09:57 +0200)]
s390: avoid extable collisions
We have some inline assemblies where the extable entry points to a
label at the end of an inline assembly which is not followed by an
instruction.
On the other hand we have also inline assemblies where the extable
entry points to the first instruction of an inline assembly.
If a first type inline asm (extable point to empty label at the end)
would be directly followed by a second type inline asm (extable points
to first instruction) then we would have two different extable entries
that point to the same instruction but would have a different target
address.
This can lead to quite random behaviour, depending on sorting order.
I verified that we currently do not have such collisions within the
kernel. However to avoid such subtle bugs add a couple of nop
instructions to those inline assemblies which contain an extable that
points to an empty label.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Mon, 13 Jun 2016 08:17:20 +0000 (10:17 +0200)]
s390/uaccess: use __builtin_expect for get_user/put_user
We always expect that get_user and put_user return with zero. Give the
compiler a hint so it can slightly optimize the code and avoid
branches.
This is the same what x86 got with commit
a76cf66e948a ("x86/uaccess:
Tell the compiler that uaccess is unlikely to fault").
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Fri, 10 Jun 2016 07:35:51 +0000 (09:35 +0200)]
s390/uaccess: fix whitespace damage
Fix some whitespace damage that was introduced by me with a
query-replace when removing 31 bit support.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Sebastian Ott [Fri, 3 Jun 2016 17:05:38 +0000 (19:05 +0200)]
s390/pci: ensure to not cross a dma segment boundary
When we use the iommu_area_alloc helper to get dma addresses
we specify the boundary_size parameter but not the offset (called
shift in this context).
As long as the offset (start_dma) is a multiple of the boundary
we're ok (on current machines start_dma always seems to be 4GB).
Don't leave this to chance and specify the offset for iommu_area_alloc.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Sebastian Ott [Fri, 3 Jun 2016 17:03:12 +0000 (19:03 +0200)]
s390/pci: ensure page aligned dma start address
We don't have an architectural guarantee on the value of
the dma offset but rely on it to be at least page aligned.
Enforce page alignemt of start_dma.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Sebastian Ott [Thu, 2 Jun 2016 12:57:17 +0000 (14:57 +0200)]
s390: use SPARSE_IRQ
Use dynamically allocated irq descriptors on s390 which allows
us to get rid of the s390 specific config option PCI_NR_MSI and
exploit more MSI interrupts. Also the size of the kernel image
is reduced by 131K (using performance_defconfig).
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Thomas Richter [Wed, 8 Jun 2016 11:58:22 +0000 (13:58 +0200)]
s390/Documentation: improve sort command for trace buffer
When s390 traces with hex_ascii or sprintf view are
extracted and sorted, use the sort option -s (stable)
to avoid multiple lines with the same time stamp being
sorted using the rest of the line as secondary key.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Tue, 7 Jun 2016 08:23:07 +0000 (10:23 +0200)]
s390: use __section macro everywhere
Small cleanup patch to use the shorter __section macro everywhere.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Tue, 7 Jun 2016 08:12:55 +0000 (10:12 +0200)]
s390: add proper __ro_after_init support
On s390 __ro_after_init is currently mapped to __read_mostly which
means that data marked as __ro_after_init will not be protected.
Reason for this is that the common code __ro_after_init implementation
is x86 centric: the ro_after_init data section was added to rodata,
since x86 enables write protection to kernel text and rodata very
late. On s390 we have write protection for these sections enabled with
the initial page tables. So adding the ro_after_init data section to
rodata does not work on s390.
In order to make __ro_after_init work properly on s390 move the
ro_after_init data, right behind rodata. Unlike the rodata section it
will be marked read-only later after all init calls happened.
This s390 specific implementation adds new __start_ro_after_init and
__end_ro_after_init labels. Everything in between will be marked
read-only after the init calls happened. In addition to the
__ro_after_init data move also the exception table there, since from a
practical point of view it fits the __ro_after_init requirements.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Tue, 7 Jun 2016 10:20:51 +0000 (12:20 +0200)]
vmlinux.lds.h: allow arch specific handling of ro_after_init data section
commit
c74ba8b3480d ("arch: Introduce post-init read-only memory")
introduced the __ro_after_init attribute which allows to add variables
to the ro_after_init data section.
This new section was added to rodata, even though it contains writable
data. This in turn causes problems on architectures which mark the
page table entries read-only that point to rodata very early.
This patch allows architectures to implement an own handling of the
.data..ro_after_init section.
Usually that would be:
- mark the rodata section read-only very early
- mark the ro_after_init section read-only within mark_rodata_ro
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Martin Schwidefsky [Wed, 25 May 2016 07:45:26 +0000 (09:45 +0200)]
s390/mm: simplify the TLB flushing code
ptep_flush_lazy and pmdp_flush_lazy use mm->context.attach_count to
decide between a lazy TLB flush vs an immediate TLB flush. The field
contains two 16-bit counters, the number of CPUs that have the mm
attached and can create TLB entries for it and the number of CPUs in
the middle of a page table update.
The __tlb_flush_asce, ptep_flush_direct and pmdp_flush_direct functions
use the attach counter and a mask check with mm_cpumask(mm) to decide
between a local flush local of the current CPU and a global flush.
For all these functions the decision between lazy vs immediate and
local vs global TLB flush can be based on CPU masks. There are two
masks: the mm->context.cpu_attach_mask with the CPUs that are actively
using the mm, and the mm_cpumask(mm) with the CPUs that have used the
mm since the last full flush. The decision between lazy vs immediate
flush is based on the mm->context.cpu_attach_mask, to decide between
local vs global flush the mm_cpumask(mm) is used.
With this patch all checks will use the CPU masks, the old counter
mm->context.attach_count with its two 16-bit values is turned into a
single counter mm->context.flush_count that keeps track of the number
of CPUs with incomplete page table updates. The sole user of this
counter is finish_arch_post_lock_switch() which waits for the end of
all page table updates.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Martin Schwidefsky [Wed, 25 May 2016 07:32:20 +0000 (09:32 +0200)]
bitmap: bitmap_equal memcmp optimization
The bitmap_equal function has optimized code for small bitmaps with less
than BITS_PER_LONG bits. For larger bitmaps the out-of-line function
__bitmap_equal is called.
For a constant number of bits divisible by BITS_PER_LONG the memcmp
function can be used. For s390 gcc knows how to optimize this function,
memcmp calls with up to 256 bytes / 2048 bits are translated into a
single instruction.
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Martin Schwidefsky [Mon, 6 Jun 2016 08:30:45 +0000 (10:30 +0200)]
s390/mm: fix vunmap vs finish_arch_post_lock_switch
The vunmap_pte_range() function calls ptep_get_and_clear() without any
locking. ptep_get_and_clear() uses ptep_xchg_lazy()/ptep_flush_direct()
for the page table update. ptep_flush_direct requires that preemption
is disabled, but without any locking this is not the case. If the kernel
preempts the task while the attach_counter is increased an endless loop
in finish_arch_post_lock_switch() will occur the next time the task is
scheduled.
Add explicit preempt_disable()/preempt_enable() calls to the relevant
functions in arch/s390/mm/pgtable.c.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Martin Schwidefsky [Tue, 31 May 2016 13:06:51 +0000 (15:06 +0200)]
s390/time: remove ETR support
The External-Time-Reference (ETR) clock synchronization interface has
been superseded by Server-Time-Protocol (STP). Remove the outdated
ETR interface.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Martin Schwidefsky [Tue, 31 May 2016 10:47:03 +0000 (12:47 +0200)]
s390/time: add leap seconds to initial system time
The PTFF instruction can be used to retrieve information about UTC
including the current number of leap seconds. Use this value to
convert the coordinated server time value of the TOD clock to a
proper UTC timestamp to initialize the system time. Without this
correction the system time will be off by the number of leap seonds
until it has been corrected via NTP.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Martin Schwidefsky [Tue, 31 May 2016 08:16:24 +0000 (10:16 +0200)]
s390/time: LPAR offset handling
It is possible to specify a user offset for the TOD clock, e.g. +2 hours.
The TOD clock will carry this offset even if the clock is synchronized
with STP. This makes the time stamps acquired with get_sync_clock()
useless as another LPAR migth use a different TOD offset.
Use the PTFF instrution to get the TOD epoch difference and subtract
it from the TOD clock value to get a physical timestamp. As the epoch
difference contains the sync check delta as well the LPAR offset value
to the physical clock needs to be refreshed after each clock
synchronization.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Martin Schwidefsky [Tue, 31 May 2016 07:23:37 +0000 (09:23 +0200)]
s390/time: move PTFF definitions
The PTFF instruction is not a function of ETR, rename and move the
PTFF definitions from etr.h to timex.h.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Martin Schwidefsky [Tue, 31 May 2016 07:09:57 +0000 (09:09 +0200)]
s390/time: STP sync clock correction
The sync clock operation of the channel subsystem call for STP delivers
the TOD clock difference as a result. Use this TOD clock difference
instead of the difference between the TOD timestamps before and after
the sync clock operation.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Tue, 31 May 2016 07:14:00 +0000 (09:14 +0200)]
s390/kexec: fix crash on resize of reserved memory
Reducing the size of reserved memory for the crash kernel will result
in an immediate crash on s390. Reason for that is that we do not
create struct pages for memory that is reserved. If that memory is
freed any access to struct pages which correspond to this memory will
result in invalid memory accesses and a kernel panic.
Fix this by properly creating struct pages when the system gets
initialized. Change the code also to make use of set_memory_ro() and
set_memory_rw() so page tables will be split if required.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Tue, 31 May 2016 07:13:59 +0000 (09:13 +0200)]
s390/kexec: fix update of os_info crash kernel size
Implement an s390 version of the weak crash_free_reserved_phys_range
function. This allows us to update the size of the reserved crash
kernel memory if it will be resized.
This was previously done with a call to crash_unmap_reserved_pages
from crash_shrink_memory which was removed with ("s390/kexec:
consolidate crash_map/unmap_reserved_pages() and
arch_kexec_protect(unprotect)_crashkres()")
Fixes: 7a0058ec7860 ("s390/kexec: consolidate crash_map/unmap_reserved_pages() and arch_kexec_protect(unprotect)_crashkres()")
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Sat, 28 May 2016 08:03:55 +0000 (10:03 +0200)]
s390/mm: align swapper_pg_dir to 16k
The segment/region table that is part of the kernel image must be
properly aligned to 16k in order to make the crdte inline assembly
work.
Otherwise it will calculate a wrong segment/region table start address
and access incorrect memory locations if the swapper_pg_dir is not
aligned to 16k.
Therefore define BSS_FIRST_SECTIONS in order to put the swapper_pg_dir
at the beginning of the bss section and also align the bss section to
16k just like other architectures did.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Christian Borntraeger [Tue, 24 May 2016 13:23:20 +0000 (15:23 +0200)]
s390: dump_stack: fill in arch description
Lets provide the basic machine information for dump_stack on
s390. This enables the "Hardware name:" line and results in
output like
[...]
Oops: 0004 ilc:2 [#1] SMP
Modules linked in:
CPU: 1 PID: 74 Comm: sh Not tainted 4.5.0+ #205
Hardware name: IBM 2964 NC9 704 (KVM)
[...]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Daniel van Gerpen [Mon, 23 May 2016 13:19:38 +0000 (15:19 +0200)]
s390: use canonical include guard style
Signed-off-by: Daniel van Gerpen <daniel@vangerpen.de>
Acked-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Thu, 14 Apr 2016 10:35:22 +0000 (12:35 +0200)]
s390/cpuinfo: show dynamic and static cpu mhz
Show the dynamic and static cpu mhz of each cpu. Since these values
are per cpu this requires a fundamental extension of the format of
/proc/cpuinfo.
Historically we had only a single line per cpu and a summary at the
top of the file. This format is hardly extendible if we want to add
more per cpu information.
Therefore this patch adds per cpu blocks at the end of /proc/cpuinfo:
cpu : 0
cpu Mhz dynamic : 5504
cpu Mhz static : 5504
cpu : 1
cpu Mhz dynamic : 5504
cpu Mhz static : 5504
cpu : 2
cpu Mhz dynamic : 5504
cpu Mhz static : 5504
cpu : 3
cpu Mhz dynamic : 5504
cpu Mhz static : 5504
Right now each block contains only the dynamic and static cpu mhz,
but it can be easily extended like on every other architecture.
This extension is supposed to be compatible with the old format.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Thu, 14 Apr 2016 06:57:19 +0000 (08:57 +0200)]
s390/cpuinfo: print cache info and all single cpu lines on first iteration
Change the code to print all the current output during the first
iteration. This is a preparation patch for the upcoming per cpu block
extension to /proc/cpuinfo.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Jason Baron [Fri, 20 May 2016 21:16:35 +0000 (17:16 -0400)]
s390: add explicit <linux/stringify.h> for jump label
Ensure that we always have __stringify().
Signed-off-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Fri, 20 May 2016 06:08:14 +0000 (08:08 +0200)]
s390/pgtable: add mapping statistics
Add statistics that show how memory is mapped within the kernel
identity mapping. This is more or less the same like git
commit
ce0c0e50f94e ("x86, generic: CPA add statistics about state
of direct mapping v4") for x86.
I also intentionally copied the lower case "k" within DirectMap4k vs
the upper case "M" and "G" within the two other lines. Let's have
consistent inconsistencies across architectures.
The output of /proc/meminfo now contains these additional lines:
DirectMap4k: 2048 kB
DirectMap1M:
3991552 kB
DirectMap2G:
4194304 kB
The implementation on s390 is lockless unlike the x86 version, since I
assume changes to the kernel mapping are a very rare event. Therefore
it really doesn't matter if these statistics could potentially be
inconsistent if read while kernel pages tables are being changed.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Tue, 10 May 2016 14:28:28 +0000 (16:28 +0200)]
s390/vmem: simplify vmem code for read-only mappings
For the kernel identity mapping map everything read-writeable and
subsequently call set_memory_ro() to make the ro section read-only.
This simplifies the code a lot.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Tue, 17 May 2016 08:50:15 +0000 (10:50 +0200)]
s390/pageattr: allow kernel page table splitting
set_memory_ro() and set_memory_rw() currently only work on 4k
mappings, which is good enough for module code aka the vmalloc area.
However we stumbled already twice into the need to make this also work
on larger mappings:
- the ro after init patch set
- the crash kernel resize code
Therefore this patch implements automatic kernel page table splitting
if e.g. set_memory_ro() would be called on parts of a 2G mapping.
This works quite the same as the x86 code, but is much simpler.
In order to make this work and to be architecturally compliant we now
always use the csp, cspg or crdte instructions to replace valid page
table entries. This means that set_memory_ro() and set_memory_rw()
will be much more expensive than before. In order to avoid huge
latencies the code contains a couple of cond_resched() calls.
The current code only splits page tables, but does not merge them if
it would be possible. The reason for this is that currently there is
no real life scenarion where this would really happen. All current use
cases that I know of only change access rights once during the life
time. If that should change we can still implement kernel page table
merging at a later time.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Tue, 10 May 2016 08:34:47 +0000 (10:34 +0200)]
s390/pgtable: make pmd and pud helper functions available
Make pmd_wrprotect() and pmd_mkwrite() available independently from
CONFIG_TRANSPARENT_HUGEPAGE and CONFIG_HUGETLB_PAGE so these can be
used on the kernel mapping.
Also introduce a couple of pud helper functions, namely pud_pfn(),
pud_wrprotect(), pud_mkwrite(), pud_mkdirty() and pud_mkclean()
which only work on the kernel mapping.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Thu, 19 May 2016 14:25:30 +0000 (16:25 +0200)]
s390/mm: always use PAGE_KERNEL when mapping pages
Always use PAGE_KERNEL when re-enabling pages within the kernel
mapping due to debug pagealloc. Without using this pgprot value
pte_mkwrite() and pte_wrprotect() won't work on such mappings after an
unmap -> map cycle anymore.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Tue, 17 May 2016 10:17:51 +0000 (12:17 +0200)]
s390/vmem: make use of pte_clear()
Use pte_clear() instead of open-coding it.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Fri, 20 May 2016 11:34:58 +0000 (13:34 +0200)]
s390/pgtable: get rid of _REGION3_ENTRY_RO
_REGION3_ENTRY_RO is a duplicate of _REGION_ENTRY_PROTECT.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Wed, 11 May 2016 08:52:07 +0000 (10:52 +0200)]
s390/vmem: introduce and use SEGMENT_KERNEL and REGION3_KERNEL
Instead of open-coded SEGMENT_KERNEL and REGION3_KERNEL assignments use
defines. Also to make e.g. pmd_wrprotect() work on the kernel mapping
a couple more flags must be set. Therefore add the missing flags also.
In order to make everything symmetrical this patch also adds software
dirty, young, read and write bits for region 3 table entries.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Fri, 13 May 2016 09:10:09 +0000 (11:10 +0200)]
s390/vmem: align segment and region tables to 16k
Usually segment and region tables are 16k aligned due to the way the
buddy allocator works. This is not true for the vmem code which only
asks for a 4k alignment. In order to be consistent enforce a 16k
alignment here as well.
This alignment will be assumed and therefore is required by the
pageattr code.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Sat, 14 May 2016 08:46:33 +0000 (10:46 +0200)]
s390/pgtable: introduce and use generic csp inline asm
We have already two inline assemblies which make use of the csp
instruction. Since I need a third instance let's introduce a generic
inline assmebly which can be used by everyone.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Muhammad Falak R Wani [Fri, 20 May 2016 13:21:20 +0000 (18:51 +0530)]
s390/keyboard: use memdup_user_nul()
Use memdup_user_nul to duplicate a memory region from user-space
to kernel-space and terminate with a NULL, instead of open coding
using kmalloc + copy_from_user and explicitly NULL terminating.
Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
[heiko.carstens@de.ibm.com: remove comment]
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Christian Borntraeger [Mon, 13 Jun 2016 11:14:56 +0000 (13:14 +0200)]
KVM: s390/mm: Fix CMMA reset during reboot
commit
1e133ab296f ("s390/mm: split arch/s390/mm/pgtable.c") factored
out the page table handling code from __gmap_zap and __s390_reset_cmma
into ptep_zap_unused and added a simple flag that tells which one of the
function (reset or not) is to be made. This also changed the behaviour,
as it also zaps unused page table entries on reset.
Turns out that this is wrong as s390_reset_cmma uses the page walker,
which DOES NOT take the ptl lock.
The most simple fix is to not do the zapping part on reset (which uses
the walker)
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Fixes: 1e133ab296f ("s390/mm: split arch/s390/mm/pgtable.c")
Cc: stable@vger.kernel.org # 4.6+
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Linus Torvalds [Sun, 12 Jun 2016 14:20:35 +0000 (07:20 -0700)]
Linux 4.7-rc3
Linus Torvalds [Sun, 12 Jun 2016 13:30:39 +0000 (06:30 -0700)]
Merge branch 'for-rc' of git://git./linux/kernel/git/rzhang/linux
Pull thermal management fixes from Zhang Rui:
- fix an ordering issue in cpu cooling that cooling device is
registered before it's ready (freq_table being populated).
(Lukasz Luba)
- fix a missing comment update (Caesar Wang)
* 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
thermal: add the note for set_trip_temp
thermal: cpu_cooling: fix improper order during initialization
Linus Torvalds [Sun, 12 Jun 2016 01:42:59 +0000 (18:42 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block layer fixes from Jens Axboe:
"A small collection of fixes for the current series. This contains:
- Two fixes for xen-blkfront, from Bob Liu.
- A bug fix for NVMe, releasing only the specific resources we
requested.
- Fix for a debugfs flags entry for nbd, from Josef.
- Plug fix from Omar, fixing up a case of code being switched between
two functions.
- A missing bio_put() for the new discard callers of
submit_bio_wait(), fixing a regression causing a leak of the bio.
From Shaun.
- Improve dirty limit calculation precision in the writeback code,
fixing a case where setting a limit lower than 1% of memory would
end up being zero. From Tejun"
* 'for-linus' of git://git.kernel.dk/linux-block:
NVMe: Only release requested regions
xen-blkfront: fix resume issues after a migration
xen-blkfront: don't call talk_to_blkback when already connected to blkback
nbd: pass the nbd pointer for flags debugfs
block: missing bio_put following submit_bio_wait
blk-mq: really fix plug list flushing for nomerge queues
writeback: use higher precision calculation in domain_dirty_limits()
Linus Torvalds [Sun, 12 Jun 2016 01:03:39 +0000 (18:03 -0700)]
Merge tag 'gpio-v4.7-3' of git://git./linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"A new bunch of GPIO fixes for v4.7.
This time I am very grateful that Ricardo Ribalda Delgado went in and
fixed my stupid refcounting mistakes in the removal path for GPIO
chips. I had a feeling something was wrong here and so it was. It
exploded on OMAP and it fixes their problem. Now it should be (more)
solid.
The rest i compilation, Kconfig and driver fixes. Some tagged for
stable.
Summary:
- Fix a NULL pointer dereference when we are searching the GPIO
device list but one of the devices have been removed (struct
gpio_chip pointer is NULL).
- Fix unaligned reference counters: we were ending on +3 after all
said and done. It should be 0. Remove an extraneous get_device(),
and call cdev_del() followed by device_del() in gpiochip_remove()
instead and the count goes to zero and calls the release() function
properly.
- Fix a compile warning due to a missing #include in the OF/device
tree portions.
- Select ANON_INODES for GPIOLIB, we're using that for our character
device. Some randconfig tests disclosed the problem.
- Make sure the Zynq driver clock runs also without CONFIG_PM enabled
- Fix an off-by-one error in the 104-DIO-48E driver
- Fix warnings in bcm_kona_gpio_reset()"
* tag 'gpio-v4.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: bcm-kona: fix bcm_kona_gpio_reset() warnings
gpio: select ANON_INODES
gpio: include <linux/io-mapping.h> in gpiolib-of
gpiolib: Fix unaligned used of reference counters
gpiolib: Fix NULL pointer deference
gpio: zynq: initialize clock even without CONFIG_PM
gpio: 104-dio-48e: Fix control port offset computation off-by-one error
Linus Torvalds [Sat, 11 Jun 2016 18:42:08 +0000 (11:42 -0700)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two current fixes:
- one affects Qemu CD ROM emulation, which stopped working after the
updates in SCSI to require VPD pages from all conformant devices.
Fix temporarily by blacklisting Qemu (we can relax later when they
come into compliance).
- The other is a fix to the optimal transfer size. We set up a
minefield for ourselves by being confused about whether the limits
are in bytes or sectors (SCSI optimal is in blocks and the queue
parameter is in bytes).
This tries to fix the problem (wrong setting for queue limits
max_sectors) and make the problem more obvious by introducing a
wrapper function"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
sd: Fix rw_max for devices that report an optimal xfer size
scsi: Add QEMU CD-ROM to VPD Inquiry Blacklist
Linus Torvalds [Sat, 11 Jun 2016 18:24:54 +0000 (11:24 -0700)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- a bigger fix for i801 to finally be able to be loaded on some
machines again
- smaller driver fixes
- documentation update because of a renamed file
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mux: reg: Provide of_match_table
i2c: mux: refer to i2c-mux.txt
i2c: octeon: Avoid printk after too long SMBUS message
i2c: octeon: Missing AAK flag in case of I2C_M_RECV_LEN
i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR
Linus Torvalds [Sat, 11 Jun 2016 18:08:57 +0000 (11:08 -0700)]
Merge tag 'devicetree-fixes-for-4.7' of git://git./linux/kernel/git/robh/linux
Pull DeviceTree fixes from Rob Herring:
- fix unflatten_dt_nodes when dad parameter is set.
- add vendor prefixes for TechNexion and UniWest
- documentation fix for Marvell BT
- OF IRQ kerneldoc fixes
- restrict CMA alignment adjustments to non dma-coherent
- a couple of warning fixes in reserved-memory code
- DT maintainers updates
* tag 'devicetree-fixes-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
drivers: of: add definition of early_init_dt_alloc_reserved_memory_arch
drivers/of: Fix depth for sub-tree blob in unflatten_dt_nodes()
drivers: of: Fix of_pci.h header guard
dt-bindings: Add vendor prefix for TechNexion
of: add vendor prefix for UniWest
dt: bindings: fix documentation for MARVELL's bt-sd8xxx wireless device
of: add missing const for of_parse_phandle_with_args() in !CONFIG_OF
of: silence warnings due to max() usage
drivers: of: of_reserved_mem: fixup the CMA alignment not to affect dma-coherent
of: irq: fix of_irq_get[_byname]() kernel-doc
MAINTAINERS: DeviceTree maintainer updates
Linus Torvalds [Sat, 11 Jun 2016 17:55:30 +0000 (10:55 -0700)]
Merge tag '20160610_uvc_compat_for_linus' of git://git./linux/kernel/git/luto/linux
Pull uvc compat XU ioctl fixes from Andy Lutomirski:
"uvc's compat XU ioctls go through tons of potentially buggy
indirection. The first patch removes the indirection. The second one
cleans up the code.
Compile-tested only. I have the hardware, but I have absolutely no
idea what XU does, how to use it, what software to recompile as
32-bit, or what to test in that software"
* tag '20160610_uvc_compat_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/luto/linux:
uvc_v4l2: Simplify compat ioctl implementation
uvc: Forward compat ioctls to their handlers directly
Andy Lutomirski [Thu, 12 May 2016 00:41:27 +0000 (17:41 -0700)]
uvc_v4l2: Simplify compat ioctl implementation
The uvc compat ioctl implementation seems to have copied user data
for no good reason. Remove a bunch of copies.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Andy Lutomirski [Tue, 24 May 2016 22:13:02 +0000 (15:13 -0700)]
uvc: Forward compat ioctls to their handlers directly
The current code goes through a lot of indirection just to call a
known handler. Simplify it: just call the handlers directly.
Cc: stable@vger.kernel.org
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Linus Torvalds [Fri, 10 Jun 2016 21:13:27 +0000 (14:13 -0700)]
Merge branch 'for-linus-4.7' of git://git./linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
"Has some fixes and some new self tests for btrfs. The self tests are
usually disabled in the .config file (unless you're doing btrfs dev
work), and this bunch is meant to find problems with the 64K page size
patches.
Jeff has a patch to help people see if they are using the hardware
assist crc32c module, which really helps us nail down problems when
people ask why crcs are using so much CPU.
Otherwise, it's small fixes"
* 'for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: self-tests: Fix extent buffer bitmap test fail on BE system
Btrfs: self-tests: Fix test_bitmaps fail on 64k sectorsize
Btrfs: self-tests: Use macros instead of constants and add missing newline
Btrfs: self-tests: Support testing all possible sectorsizes and nodesizes
Btrfs: self-tests: Execute page straddling test only when nodesize < PAGE_SIZE
btrfs: advertise which crc32c implementation is being used at module load
Btrfs: add validadtion checks for chunk loading
Btrfs: add more validation checks for superblock
Btrfs: clear uptodate flags of pages in sys_array eb
Btrfs: self-tests: Support non-4k page size
Btrfs: Fix integer overflow when calculating bytes_per_bitmap
Btrfs: test_check_exists: Fix infinite loop when searching for free space entries
Btrfs: end transaction if we abort when creating uuid root
btrfs: Use __u64 in exported linux/btrfs.h.
Linus Torvalds [Fri, 10 Jun 2016 19:23:49 +0000 (12:23 -0700)]
Merge tag 'powerpc-4.7-3Michael Ellerman:' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from
- ptrace: Fix out of bounds array access warning from Khem Raj
- pseries: Fix PCI config address for DDW from Gavin Shan
- pseries: Fix IBM_ARCH_VEC_NRCORES_OFFSET since POWER8NVL was added
from Michael Ellerman
- of: fix autoloading due to broken modalias with no 'compatible' from
Wolfram Sang
- radix: Fix always false comparison against MMU_NO_CONTEXT from Aneesh
Kumar K.V
- hash: Compute the segment size correctly for ISA 3.0 from Aneesh
Kumar K.V
- nohash: Fix build break with 64K pages from Michael Ellerman
* tag 'powerpc-4.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/nohash: Fix build break with 64K pages
powerpc/mm/hash: Compute the segment size correctly for ISA 3.0
powerpc/mm/radix: Fix always false comparison against MMU_NO_CONTEXT
of: fix autoloading due to broken modalias with no 'compatible'
powerpc/pseries: Fix IBM_ARCH_VEC_NRCORES_OFFSET since POWER8NVL was added
powerpc/pseries: Fix PCI config address for DDW
powerpc/ptrace: Fix out of bounds array access warning
Linus Torvalds [Fri, 10 Jun 2016 19:18:34 +0000 (12:18 -0700)]
Merge tag 'hwmon-for-linus-v4.7-rc3' of git://git./linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- fix regression in fam15h_power driver
- minor variable type fix in lm90 driver
- document compatible statement for ina2xx driver
* tag 'hwmon-for-linus-v4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (lm90) use proper type for update_interval
hwmon: (ina2xx) Document compatible for INA231
hwmon: (fam15h_power) Disable preemption when reading registers
Linus Torvalds [Fri, 10 Jun 2016 19:10:02 +0000 (12:10 -0700)]
Merge branch 'stacking-fixes' (vfs stacking fixes from Jann)
Merge filesystem stacking fixes from Jann Horn.
* emailed patches from Jann Horn <jannh@google.com>:
sched: panic on corrupted stack end
ecryptfs: forbid opening files without mmap handler
proc: prevent stacking filesystems on top
Jann Horn [Wed, 1 Jun 2016 09:55:07 +0000 (11:55 +0200)]
sched: panic on corrupted stack end
Until now, hitting this BUG_ON caused a recursive oops (because oops
handling involves do_exit(), which calls into the scheduler, which in
turn raises an oops), which caused stuff below the stack to be
overwritten until a panic happened (e.g. via an oops in interrupt
context, caused by the overwritten CPU index in the thread_info).
Just panic directly.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jann Horn [Wed, 1 Jun 2016 09:55:06 +0000 (11:55 +0200)]
ecryptfs: forbid opening files without mmap handler
This prevents users from triggering a stack overflow through a recursive
invocation of pagefault handling that involves mapping procfs files into
virtual memory.
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Tyler Hicks <tyhicks@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jann Horn [Wed, 1 Jun 2016 09:55:05 +0000 (11:55 +0200)]
proc: prevent stacking filesystems on top
This prevents stacking filesystems (ecryptfs and overlayfs) from using
procfs as lower filesystem. There is too much magic going on inside
procfs, and there is no good reason to stack stuff on top of procfs.
(For example, procfs does access checks in VFS open handlers, and
ecryptfs by design calls open handlers from a kernel thread that doesn't
drop privileges or so.)
Signed-off-by: Jann Horn <jannh@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 10 Jun 2016 18:57:17 +0000 (11:57 -0700)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fix from Will Deacon:
"A fix for an issue that Alex saw whilst swapping with hardware
access/dirty bit support enabled in the kernel: Fix a failure to fault
in old pages on a write when CONFIG_ARM64_HW_AFDBM is enabled"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mm: always take dirty state from new pte in ptep_set_access_flags
Linus Torvalds [Fri, 10 Jun 2016 18:36:04 +0000 (11:36 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Misc fixes from all around the map, plus a commit that introduces a
new header of Intel model name symbols (unused) that will make the
next merge window easier"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ioapic: Fix incorrect pointers in ioapic_setup_resources()
x86/entry/traps: Don't force in_interrupt() to return true in IST handlers
x86/cpu/AMD: Extend X86_FEATURE_TOPOEXT workaround to newer models
x86/cpu/intel: Introduce macros for Intel family numbers
x86, build: copy ldlinux.c32 to image.iso
x86/msr: Use the proper trace point conditional for writes
Linus Torvalds [Fri, 10 Jun 2016 18:24:39 +0000 (11:24 -0700)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Two scheduler debugging fixes"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/debug: Fix 'schedstats=enable' cmdline option
sched/debug: Fix /proc/sched_debug regression
Linus Torvalds [Fri, 10 Jun 2016 18:15:41 +0000 (11:15 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"A handful of tooling fixes, two PMU driver fixes and a cleanup of
redundant code that addresses a security analyzer false positive"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Remove a redundant check
perf/x86/intel/uncore: Remove SBOX support for Broadwell server
perf ctf: Convert invalid chars in a string before set value
perf record: Fix crash when kptr is restricted
perf symbols: Check kptr_restrict for root
perf/x86/intel/rapl: Fix pmus free during cleanup
Linus Torvalds [Fri, 10 Jun 2016 17:53:46 +0000 (10:53 -0700)]
Merge branch 'locking-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull locking fixes from Ingo Molnar:
"Misc fixes:
- a file-based futex fix
- one more spin_unlock_wait() fix
- a ww-mutex deadlock detection improvement/fix
- and a raw_read_seqcount_latch() barrier fix"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Calculate the futex key based on a tail page for file-based futexes
locking/qspinlock: Fix spin_unlock_wait() some more
locking/ww_mutex: Report recursive ww_mutex locking early
locking/seqcount: Re-fix raw_read_seqcount_latch()
Linus Torvalds [Fri, 10 Jun 2016 17:47:22 +0000 (10:47 -0700)]
Merge branch 'efi-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull EFI fixes from Ingo Molnar:
"Two fixes: a regression/crash fix, and a message output fix"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/arm: Fix the format of EFI debug messages
efi: Fix for_each_efi_memory_desc_in_map() for empty memmaps
Linus Torvalds [Fri, 10 Jun 2016 17:37:01 +0000 (10:37 -0700)]
Merge branch 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull objtool fix from Ingo Molnar:
"Addresses a false positive warning in the GPU/DRM code"
[ Technically it's not a "false positive", but it's the virtual GPU
interface that needs the frame pointer for its own internal purposes ]
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool, drm/vmwgfx: Fix "duplicate frame pointer save" warning
Linus Torvalds [Fri, 10 Jun 2016 15:32:24 +0000 (08:32 -0700)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) nfnetlink timestamp taken from wrong skb, fix from Florian Westphal.
2) Revert some msleep conversions in rtlwifi as these spots are in
atomic context, from Larry Finger.
3) Validate that NFTA_SET_TABLE attribute is actually specified when we
call nf_tables_getset(). From Phil Turnbull.
4) Don't do mdio_reset in stmmac driver with spinlock held as that can
sleep, from Vincent Palatin.
5) sk_filter() does things other than run a BPF filter, so we should
not elide it's call just because sk->sk_filter is NULL. Fix from
Eric Dumazet.
6) Fix missing backlog updates in several packet schedulers, from Cong
Wang.
7) bnx2x driver should allow VLAN add/remove while the interface is
down, from Michal Schmidt.
8) Several RDS/TCP race fixes from Sowmini Varadhan.
9) fq_codel scheduler doesn't return correct queue length in dumps,
from Eric Dumazet.
10) Fix TCP stats for tail loss probe and early retransmit in ipv6, from
Yuchung Cheng.
11) Properly initialize udp_tunnel_socket_cfg in l2tp_tunnel_create(),
from Guillaume Nault.
12) qfq scheduler leaks SKBs if a kzalloc fails, fix from Florian
Westphal.
13) sock_fprog passed into PACKET_FANOUT_DATA needs compat handling,
from Willem de Bruijn.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (85 commits)
vmxnet3: segCnt can be 1 for LRO packets
packet: compat support for sock_fprog
stmmac: fix parameter to dwmac4_set_umac_addr()
net/mlx5e: Fix blue flame quota logic
net/mlx5e: Use ndo_stop explicitly at shutdown flow
net/mlx5: E-Switch, always set mc_promisc for allmulti vports
net/mlx5: E-Switch, Modify node guid on vf set MAC
net/mlx5: E-Switch, Fix vport enable flow
net/mlx5: E-Switch, Use the correct error check on returned pointers
net/mlx5: E-Switch, Use the correct free() function
net/mlx5: Fix E-Switch flow steering capabilities check
net/mlx5: Fix flow steering NIC capabilities check
net/mlx5: Fix root flow table update
net/mlx5: Fix MLX5_CMD_OP_MAX to be defined correctly
net/mlx5: Fix masking of reserved bits in XRCD number
net/mlx5: Fix the size of modify QP mailbox
mlxsw: spectrum: Don't sleep during ndo_get_phys_port_name()
mlxsw: spectrum: Make split flow match firmware requirements
wext: Fix 32 bit iwpriv compatibility issue with 64 bit Kernel
cfg80211: remove get/set antenna and tx power warnings
...
Linus Torvalds [Fri, 10 Jun 2016 15:27:30 +0000 (08:27 -0700)]
Merge tag 'sound-4.7-rc3' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"We have only few, mainly HD-audio device-specific fixes. Realtek
codec driver got a slightly more LOC, but they are all for the new
codec chip, and won't affect others at all"
* tag 'sound-4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Add PCI ID for Kabylake
ALSA: hda/realtek: Add T560 docking unit fixup
ALSA: hda - Fix headset mic detection problem for Dell machine
ALSA: uapi: Add three missing header files to Kbuild file
ALSA: hda/realtek - Add support for new codecs ALC700/ALC701/ALC703
ALSA: hda/realtek - ALC256 speaker noise issue
Linus Torvalds [Fri, 10 Jun 2016 15:21:06 +0000 (08:21 -0700)]
Merge tag 'drm-fixes-for-v4.7-rc3' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"This weeks instalment of fixes:
amdgpu:
Lots of memory leak and firmware leak fixes
nouveau:
Collection of display fixes, KASAN fixes
vc4:
vblank/pageflipping fixes
fsl-dcu:
Regmap cache fix
omap:
Unused variable warning fix.
Nothing too surprising so far"
* tag 'drm-fixes-for-v4.7-rc3' of git://people.freedesktop.org/~airlied/linux: (46 commits)
drm/amdgpu: fix warning with powerplay disabled.
drm/amd/powerplay: delete useless code as pptable changed in vbios.
drm/amd/powerplay: fix bug visit array out of bounds
drm/amdgpu: fix smu ucode memleak (v2)
drm/amdgpu: add release firmware for cgs
drm/amdgpu: fix tonga smu_fini mem leak
drm/amdgpu: fix fiji smu fini mem leak
drm/amdgpu: fix cik sdma ucode memleak
drm/amdgpu: fix sdma24 ucode mem leak
drm/amdgpu: fix sdma3 ucode mem leak
drm/amdgpu: fix uvd fini mem leak
drm/amdgpu: fix gfx 7 ucode mem leak
drm/amdgpu: fix gfx8 ucode mem leak
drm/amdgpu: fix missing free wb for cond_exec
drm/amdgpu: fix memleak in pptable_init
drm/amdgpu: fix mem leak in atombios
drm/amdgpu: fix mem leak in pplib/hwmgr
drm/amdgpu: fix mem leak in smumgr
drm/amdgpu: add pipeline sync while vmid switch in same ctx
drm/amdgpu: vBIOS post only call when mem_size zero
...
Linus Torvalds [Fri, 10 Jun 2016 15:15:37 +0000 (08:15 -0700)]
Merge tag 'acpi-4.7-rc3' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"A recently introduced boot regression related to the ACPI EC
initialization is addressed by restoring the previous behavior (Lv
Zheng)"
* tag 'acpi-4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / EC: Fix a boot EC regresion by restoring boot EC support for the DSDT EC
Linus Torvalds [Fri, 10 Jun 2016 15:09:12 +0000 (08:09 -0700)]
Merge tag 'pm-4.7-rc3' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Stable-candidate fixes for the intel_pstate driver and the cpuidle
core.
Specifics:
- Fix two intel_pstate initialization issues, one of which was
introduced during the 4.4 cycle (Srinivas Pandruvada)
- Fix kernel build with CONFIG_UBSAN set and CONFIG_CPU_IDLE unset
(Catalin Marinas)"
* tag 'pm-4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Fix ->set_policy() interface for no_turbo
cpufreq: intel_pstate: Fix code ordering in intel_pstate_set_policy()
cpuidle: Do not access cpuidle_devices when !CONFIG_CPU_IDLE
Linus Torvalds [Fri, 10 Jun 2016 15:00:47 +0000 (08:00 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"7 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/fadvise.c: do not discard partial pages with POSIX_FADV_DONTNEED
mm: introduce dedicated WQ_MEM_RECLAIM workqueue to do lru_add_drain_all
kernel/relay.c: fix potential memory leak
mm: thp: broken page count after commit
aa88b68c3b1d
revert "mm: memcontrol: fix possible css ref leak on oom"
kasan: change memory hot-add error messages to info messages
mm/hugetlb: fix huge page reserve accounting for private mappings
Rui Wang [Wed, 8 Jun 2016 06:59:52 +0000 (14:59 +0800)]
x86/ioapic: Fix incorrect pointers in ioapic_setup_resources()
On a 4-socket Brickland system, hot-removing one ioapic is fine.
Hot-removing the 2nd one causes panic in mp_unregister_ioapic()
while calling release_resource().
It is because the iomem_res pointer has already been released
when removing the first ioapic.
To explain the use of &res[num] here: res is assigned to ioapic_resources,
and later in ioapic_insert_resources() we do:
struct resource *r = ioapic_resources;
for_each_ioapic(i) {
insert_resource(&iomem_resource, r);
r++;
}
Here 'r' is treated as an arry of 'struct resource', and the r++ ensures
that each element of the array is inserted separately. Thus we should call
release_resouce() on each element at &res[num].
Fix it by assigning the correct pointers to ioapics[i].iomem_res in
ioapic_setup_resources().
Signed-off-by: Rui Wang <rui.y.wang@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: tony.luck@intel.com
Cc: linux-pci@vger.kernel.org
Cc: rjw@rjwysocki.net
Cc: linux-acpi@vger.kernel.org
Cc: bhelgaas@google.com
Link: http://lkml.kernel.org/r/1465369193-4816-3-git-send-email-rui.y.wang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Andy Lutomirski [Tue, 24 May 2016 22:54:04 +0000 (15:54 -0700)]
x86/entry/traps: Don't force in_interrupt() to return true in IST handlers
Forcing in_interrupt() to return true if we're not in a bona fide
interrupt confuses the softirq code. This fixes warnings like:
NOHZ: local_softirq_pending 282
... which can happen when running things like selftests/x86.
This will change perf's static percpu buffer usage in IST context.
I think this is okay, and it's changing the behavior to match
historical (pre-4.0) behavior.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Fixes: 959274753857 ("x86, traps: Track entry into and exit from IST context")
Link: http://lkml.kernel.org/r/cdc215f94d118d691d73df35275022331156fb45.1464130360.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Shrikrishna Khare [Wed, 8 Jun 2016 14:40:53 +0000 (07:40 -0700)]
vmxnet3: segCnt can be 1 for LRO packets
The device emulation may send segCnt of 1 for LRO packets.
Signed-off-by: Shrikrishna Khare <skhare@vmware.com>
Signed-off-by: Jin Heo <heoj@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Tue, 7 Jun 2016 16:06:34 +0000 (12:06 -0400)]
packet: compat support for sock_fprog
Socket option PACKET_FANOUT_DATA takes a struct sock_fprog as argument
if PACKET_FANOUT has mode PACKET_FANOUT_CBPF. This structure contains
a pointer into user memory. If userland is 32-bit and kernel is 64-bit
the two disagree about the layout of struct sock_fprog.
Add compat setsockopt support to convert a 32-bit compat_sock_fprog to
a 64-bit sock_fprog. This is analogous to compat_sock_fprog support for
SO_REUSEPORT added in commit
1957598840f4 ("soreuseport: add compat
case for setsockopt SO_ATTACH_REUSEPORT_CBPF").
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Dooks [Wed, 8 Jun 2016 18:21:17 +0000 (19:21 +0100)]
stmmac: fix parameter to dwmac4_set_umac_addr()
The dwmac4_set_umac_addr() takes a struct mac_device_info as
the first parameter, but is being passed a ioaddr instead from
dwmac4_set_filter(). Fix the warning/bug by changing the first
parameter.
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c:159:46: warning: incorrect type in argument 1 (different address spaces)
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c:159:46: expected struct mac_device_info *hw
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c:159:46: got void [noderef] <asn:2>*ioaddr
Note, only compile tested this as do not have any
hardware with it in.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 10 Jun 2016 05:06:27 +0000 (22:06 -0700)]
Merge branch 'mlx5-fixes'
Saeed Mahameed says:
====================
Mellanox 100G mlx5 fixes for 4.7-rc
The following series provides some small fixes for mlx5 driver.
Two small fixes for the mlx5e netdev, the 1st is for the blue flame
quota accounting and the 2nd is a small refactoring in shutdown flow.
Five trivial fixes for mlx5 E-Switch.
- Allmulti mc_promisc flag was not set in a specific flow.
- Modify VF node guid when admin mac is changed.
- Race in vport enable flow.
- Misc code fixes (kvfree when needed and error pointers checking).
Three in mlx5 steering area. Correct capabilities checking and root flow table update.
Three misc fixes in mlx5 commands enum and layouts.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Eli Cohen [Thu, 9 Jun 2016 21:07:40 +0000 (00:07 +0300)]
net/mlx5e: Fix blue flame quota logic
Blue flame is a latency enhancement feature that allows the driver to
write the packet data directly to the NIC's registers thus making the
read of the packet data from host memory redundant.
We maintain a quota for the blue flame which is reloaded whenever we
identify that the hardware is processing send requests and processes
them fast enough so by the time we post the next send request it was
able to process all the pending ones. This indicates that the hardware
is capable of processing more blue flame requests efficiently. The blue
flame quota is decremented whenever we send using blue flame.
The current code erroneously clears the budget if we did not use blue
flame for the current post send operation and we fix it here.
Fixes: 88a85f99e51f ('net/mlx5e: TX latency optimization to save DMA reads')
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eran Ben Elisha [Thu, 9 Jun 2016 21:07:39 +0000 (00:07 +0300)]
net/mlx5e: Use ndo_stop explicitly at shutdown flow
The current implementation copies the flow of ndo_stop instead of
calling it explicitly, Fixed it.
Fixes: 5fc7197d3a25 ("net/mlx5: Add pci shutdown callback")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mohamad Haj Yahia [Thu, 9 Jun 2016 21:07:38 +0000 (00:07 +0300)]
net/mlx5: E-Switch, always set mc_promisc for allmulti vports
Set the mc_promisc flag also in the case of adding new mc address to
existing allmulti vport.
Fixes: a35f71f27a61 ('net/mlx5: E-Switch, Implement promiscuous rx modes vf request handling')
Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Noa Osherovich [Thu, 9 Jun 2016 21:07:37 +0000 (00:07 +0300)]
net/mlx5: E-Switch, Modify node guid on vf set MAC
In RoCE, the RDMA-CM needs the node guid to establish connection
between nodes.
Today, the node guid exposed to mlx5 Ethernet VFs is zero, therefore
RDMA-CM on the VF is broken.
Whenever the administrator sets a MAC for a VF, derive the node guid
from it and set it as well in the following way:
MAC: e4:1d:2d:b3:f4:01 -> node_guid: e4:1d:2d:ff:fe:b3:f4:01
Fixes: 77256579c6b43 ('net/mlx5: E-Switch, Introduce Vport...')
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mohamad Haj Yahia [Thu, 9 Jun 2016 21:07:36 +0000 (00:07 +0300)]
net/mlx5: E-Switch, Fix vport enable flow
Reorder vport enable flow to mark the vport as enabled before calling
the vport change handler which was modified to handle the case for
when vport is not enabled.
This fixes the case for when the PF netdev is open before sriov is
enabled, once sriov is enabled at esw_enable_vport,
esw_vport_change_handle_locked didn't read the PF context since it
thought the PF vport was not enabled.
When we enable the vport, arming for events is not required anymore,
since it's done on the vport change handle
Fixes: 586cfa7f1d58 ('net/mlx5: E-Switch, Use vport event handler for vport cleanup')
Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Or Gerlitz [Thu, 9 Jun 2016 21:07:35 +0000 (00:07 +0300)]
net/mlx5: E-Switch, Use the correct error check on returned pointers
The mlx5 flow-steering API (mlx5_create_flow_table/group/rule) never
returns null pointer on error. Even if it was doing that, checking
for IS_ERR_OR_NULL(p) and then returning PTR_ERR(p) would have cause
bugs, since PTR_ERR(NULL) --> success, crash.
To make things more robust and protect against related future bugs,
convert all IS_ERR_OR_NULL checks on returned values to IS_ERR.
Fixes: 5742df0f7dbe ('net/mlx5: E-Switch, Introduce VST vport ingress/egress ACLs')
Fixes: 86d722ad2c3b ('net/mlx5: Use flow steering infrastructure for mlx5_en')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reported-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Or Gerlitz [Thu, 9 Jun 2016 21:07:34 +0000 (00:07 +0300)]
net/mlx5: E-Switch, Use the correct free() function
We must use kvfree() for something that could have been allocated with vzalloc(),
do that.
Fixes: 5742df0f7dbe ('net/mlx5: E-Switch, Introduce VST vport ingress/egress ACLs')
Fixes: 86d722ad2c3b ('net/mlx5: Use flow steering infrastructure for mlx5_en')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reported-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Maor Gottlieb [Thu, 9 Jun 2016 21:07:33 +0000 (00:07 +0300)]
net/mlx5: Fix E-Switch flow steering capabilities check
Add missing capabilities check for E-Switch FDB and ACLs flow
tables before creating their namespace in flow steering.
Fixes: efdc810ba39d ('net/mlx5: Flow steering, Add vport ACL support')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Maor Gottlieb [Thu, 9 Jun 2016 21:07:32 +0000 (00:07 +0300)]
net/mlx5: Fix flow steering NIC capabilities check
Flow steering infrastructure is currently used only on link layer
ethernet, therefore the driver should initialize the flow steering
when the device link layer is ethernet.
In addition, add missing capability check before initializing the
namespace of NIC RX flow tables.
Fixes: 2530236303d9 ('net/mlx5_core: Flow steering tree initialization')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Maor Gottlieb [Thu, 9 Jun 2016 21:07:31 +0000 (00:07 +0300)]
net/mlx5: Fix root flow table update
When we destroy the last flow table we need to update
the root_ft to NULL.
It fixes an issue for when the last flow table is destroyed
and recreated again, root_ft pointer will not be updated,
as a result traffic will be dropped.
Fixes: 2cc43b494a6c ('net/mlx5_core: Managing root flow table')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shahar Klein [Thu, 9 Jun 2016 21:07:30 +0000 (00:07 +0300)]
net/mlx5: Fix MLX5_CMD_OP_MAX to be defined correctly
Having MLX5_CMD_OP_MAX on another file causes us to repeatedly miss
accounting new commands added to the driver and hence there're no entries
for them in debugfs. To solve that, we integrate it into the commands enum
as the last entry.
Fixes: 34a40e689393 ('net/mlx5_core: Introduce modify flow table command')
Signed-off-by: Shahar Klein <shahark@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Majd Dibbiny [Thu, 9 Jun 2016 21:07:29 +0000 (00:07 +0300)]
net/mlx5: Fix masking of reserved bits in XRCD number
Mask the reserved bits when reading the number of newly
created XRCD.
Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters')
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Majd Dibbiny [Thu, 9 Jun 2016 21:07:28 +0000 (00:07 +0300)]
net/mlx5: Fix the size of modify QP mailbox
Add 16 reserved bytes at the end of mlx5_modify_qp_mbox_in to
match the hardware spec definition.
Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters')
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Ellerman [Wed, 8 Jun 2016 11:50:50 +0000 (21:50 +1000)]
powerpc/nohash: Fix build break with 64K pages
Commit
74701d5947a6 "powerpc/mm: Rename function to indicate we are
allocating fragments" renamed page_table_free() to pte_fragment_free().
One occurrence was mistyped as pte_fragment_fre().
This only breaks the nohash 64K page build, which is not the default or
enabled in any defconfig.
Fixes: 74701d5947a6 ("powerpc/mm: Rename function to indicate we are allocating fragments")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Dave Airlie [Fri, 10 Jun 2016 02:17:46 +0000 (12:17 +1000)]
Merge branch 'fixes-for-v4.7-rc3' of git.agner.ch/git/linux-drm-fsl-dcu into drm-fixes
* 'fixes-for-v4.7-rc3' of http://git.agner.ch/git/linux-drm-fsl-dcu:
drm/fsl-dcu: use flat regmap cache
Dave Airlie [Fri, 10 Jun 2016 01:40:49 +0000 (11:40 +1000)]
drm/amdgpu: fix warning with powerplay disabled.
This just fixes a warning when you disable powerplay.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Thu, 9 Jun 2016 23:46:59 +0000 (09:46 +1000)]
Merge branch 'drm-fixes-4.7' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
Mostly memory leak and firmware leak fixes for amdgpu. A bit bigger than
usual since this is several weeks worth of fixes.
* 'drm-fixes-4.7' of git://people.freedesktop.org/~agd5f/linux: (28 commits)
drm/amd/powerplay: delete useless code as pptable changed in vbios.
drm/amd/powerplay: fix bug visit array out of bounds
drm/amdgpu: fix smu ucode memleak (v2)
drm/amdgpu: add release firmware for cgs
drm/amdgpu: fix tonga smu_fini mem leak
drm/amdgpu: fix fiji smu fini mem leak
drm/amdgpu: fix cik sdma ucode memleak
drm/amdgpu: fix sdma24 ucode mem leak
drm/amdgpu: fix sdma3 ucode mem leak
drm/amdgpu: fix uvd fini mem leak
drm/amdgpu: fix gfx 7 ucode mem leak
drm/amdgpu: fix gfx8 ucode mem leak
drm/amdgpu: fix missing free wb for cond_exec
drm/amdgpu: fix memleak in pptable_init
drm/amdgpu: fix mem leak in atombios
drm/amdgpu: fix mem leak in pplib/hwmgr
drm/amdgpu: fix mem leak in smumgr
drm/amdgpu: add pipeline sync while vmid switch in same ctx
drm/amdgpu: vBIOS post only call when mem_size zero
drm/amdgpu: modify sdma start sequence
...
This page took 0.051059 seconds and 5 git commands to generate.