Mauro Carvalho Chehab [Sat, 22 Aug 2015 08:25:45 +0000 (05:25 -0300)]
[media] Docbook: Fix s_rx_carrier_range parameter description
Warning(.//include/media/rc-core.h:178): No description found for parameter 's_rx_carrier_range'
Warning(.//include/media/rc-core.h:178): Excess struct/union/enum/typedef member 's_rx_carrier' description in 'rc_dev'
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Sat, 22 Aug 2015 08:16:24 +0000 (05:16 -0300)]
[media] Docbook: Fix comments at v4l2-async.h
Warning(.//include/media/v4l2-async.h:62): No description found for parameter 'match_type'
Warning(.//include/media/v4l2-async.h:62): Excess struct/union/enum/typedef member 'bus_type' description in 'v4l2_async_subdev'
Warning(.//include/media/v4l2-async.h:76): cannot understand function prototype: 'struct v4l2_async_notifier '
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Sat, 22 Aug 2015 08:02:21 +0000 (05:02 -0300)]
[media] DocBook/media/Makefile: Avoid make htmldocs to fail
If make is called twice like that:
make V=1 DOCBOOKS=device-drivers.xml htmldocs
Make will fail with:
make -f ./scripts/Makefile.build obj=scripts/basic
rm -f .tmp_quiet_recordmcount
make -f ./scripts/Makefile.build obj=scripts build_docproc
make -f ./scripts/Makefile.build obj=Documentation/DocBook htmldocs
rm -rf Documentation/DocBook/index.html; echo '<h1>Linux Kernel HTML Documentation</h1>' >> Documentation/DocBook/index.html && echo '<h2>Kernel Version: 4.2.0-rc2</h2>' >> Documentation/DocBook/index.html && cat Documentation/DocBook/device-drivers.html >> Documentation/DocBook/index.html
cp ./Documentation/DocBook//bayer.png ./Documentation/DocBook//constraints.png ./Documentation/DocBook//crop.gif ./Documentation/DocBook//dvbstb.png ./Documentation/DocBook//fieldseq_bt.gif ./Documentation/DocBook//fieldseq_tb.gif ./Documentation/DocBook//nv12mt.gif ./Documentation/DocBook//nv12mt_example.gif ./Documentation/DocBook//pipeline.png ./Documentation/DocBook//selection.png ./Documentation/DocBook//vbi_525.gif ./Documentation/DocBook//vbi_625.gif ./Documentation/DocBook//vbi_hsync.gif ./Documentation/DocBook/media/*.svg ./Documentation/DocBook/media/v4l/*.svg ./Documentation/DocBook//media_api
cp: target './Documentation/DocBook//media_api' is not a directory
Documentation/DocBook/Makefile:53: recipe for target 'htmldocs' failed
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Sat, 22 Aug 2015 07:45:03 +0000 (04:45 -0300)]
[media] Docbook: Fix description of struct media_devnode
Warning(.//include/media/media-devnode.h:80): No description found for parameter 'fops'
Warning(.//include/media/media-devnode.h:80): No description found for parameter 'dev'
Warning(.//include/media/media-devnode.h:80): No description found for parameter 'cdev'
Warning(.//include/media/media-devnode.h:80): No description found for parameter 'release'
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Fri, 21 Aug 2015 17:17:13 +0000 (14:17 -0300)]
[media] DocBook/device-drivers: Add drivers/media core stuff
There are lots of docbook marks at the media subsystem, but
those aren't used.
Add the core headers/code in order to start generating docs.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Fri, 21 Aug 2015 16:37:54 +0000 (13:37 -0300)]
[media] DocBook: fix an unbalanced <para> tag
The </para> got lost on some change at the DVB docbook, making
the tag unbalanced and causing a warning. Fix it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Mon, 17 Aug 2015 14:51:35 +0000 (11:51 -0300)]
Revert "[media] ARM: DT: STi: STiH407: Add c8sectpfe LinuxDVB DT node"
There are some missing dependencies at the DT, as it looks for
an I2C bus named "ssc2", but this is not defined.
Probably, it misses some dependencies from some other tree.
For now, revert this patch, to avoid build breakages.
This reverts commit
5d8877b6ae0d47897b821b8a11a2e8dee9a22686.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Wed, 12 Aug 2015 07:14:28 +0000 (04:14 -0300)]
[media] horus3a: fix compiler warning
Shut up this compiler warning that I get during the daily build:
horus3a.c: In function 'horus3a_set_params':
horus3a.c:308:24: warning: 'rolloff' may be used uninitialized in this function [-Wmaybe-uninitialized]
symbol_rate * (100 + rolloff), 200000) + 5;
^
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Abhilash Jindal [Tue, 11 Aug 2015 15:22:57 +0000 (12:22 -0300)]
[media] bt8xxx: Use monotonic time
Wall time obtained from do_gettimeofday is susceptible to sudden jumps due to
user setting the time or due to NTP.
Monotonic time is constantly increasing time better suited for comparing two
timestamps.
Signed-off-by: Abhilash Jindal <klock.android@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Abhilash Jindal [Tue, 11 Aug 2015 15:09:49 +0000 (12:09 -0300)]
[media] zoran: Use monotonic time
Wall time obtained from do_gettimeofday is susceptible to sudden jumps due to
user setting the time or due to NTP.
Monotonic time is constantly increasing time better suited for comparing two
timestamps.
Signed-off-by: Abhilash Jindal <klock.android@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Mike Looijmans [Tue, 11 Aug 2015 12:21:07 +0000 (09:21 -0300)]
[media] i2c/adv7511: Fix license, set to GPL v2
Header claims GPL v2, so make the MODULE_LICENSE reflect that properly.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Rob Taylor [Thu, 23 Jul 2015 12:21:43 +0000 (09:21 -0300)]
[media] media: rcar_vin: Reject videobufs that are too small for current format
In videobuf_setup reject buffers that are too small for the configured
format. Fixes v4l2-compliance issue.
Signed-off-by: Rob Taylor <rob.taylor@codethink.co.uk>
Reviewed-by: William Towle <william.towle@codethink.co.uk>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Rob Taylor [Thu, 23 Jul 2015 12:21:42 +0000 (09:21 -0300)]
[media] media: rcar_vin: fill in bus_info field
Adapt rcar_vin_querycap() so that cap->bus_info is populated with
something meaningful/unique.
Signed-off-by: Rob Taylor <rob.taylor@codethink.co.uk>
Signed-off-by: William Towle <william.towle@codethink.co.uk>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
William Towle [Thu, 23 Jul 2015 12:21:36 +0000 (09:21 -0300)]
[media] media: soc_camera: rcar_vin: Add BT.709 24-bit RGB888 input support
This adds V4L2_MBUS_FMT_RGB888_1X24 input format support
which is used by the ADV7612 chip.
Modified to use MEDIA_BUS_FMT_* constants
Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Signed-off-by: William Towle <william.towle@codethink.co.uk>
Reviewed-by: Rob Taylor <rob.taylor@codethink.co.uk>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Ezequiel Garcia [Tue, 21 Jul 2015 13:09:10 +0000 (10:09 -0300)]
[media] tw68: Move PCI vendor and device IDs to pci_ids.h
This commits moves the Intersil/Techwell PCI vendor ID, and
the device IDs for the TW68 PCI video capture cards.
This will allow to support future Intersil/Techwell devices
without duplicating the IDs.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Sakari Ailus [Thu, 12 Feb 2015 13:43:11 +0000 (11:43 -0200)]
[media] media: Correctly notify about the failed pipeline validation
On the place of the source entity name, the sink entity name was printed.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Laurent Pinchart [Wed, 20 May 2015 07:08:30 +0000 (04:08 -0300)]
[media] v4l: omap3isp: Drop platform data support
Platforms using the OMAP3 ISP have all switched to DT, drop platform
data support.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Mauro Carvalho Chehab [Tue, 11 Aug 2015 15:18:33 +0000 (12:18 -0300)]
[media] sr030pc30: don't read a new pointer
sr030pc30_get_fmt() can only succeed if both info->curr_win and
info->curr_fmt are not NULL.
If one of those vars are null, the curent code would call:
ret = sr030pc30_set_params(sd);
If the curr_win is null, it will return -EINVAL, as it would be
expected. However, if curr_fmt is NULL, the function won't
set it.
The code will then try to read from it:
mf->code = info->curr_fmt->code;
mf->colorspace = info->curr_fmt->colorspace;
with obviouly won't work.
This got reported by smatch:
drivers/media/i2c/sr030pc30.c:505 sr030pc30_get_fmt() error: we previously assumed 'info->curr_win' could be null (see line 499)
drivers/media/i2c/sr030pc30.c:507 sr030pc30_get_fmt() error: we previously assumed 'info->curr_fmt' could be null (see line 499)
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Mauro Carvalho Chehab [Tue, 11 Aug 2015 15:18:32 +0000 (12:18 -0300)]
[media] ov2659: get rid of unused values
Why to store the chosed values for prediv, postdiv and mult if
those won't be used?
drivers/media/i2c/ov2659.c: In function 'ov2659_pll_calc_params':
drivers/media/i2c/ov2659.c:912:35: warning: variable 's_mult' set but not used [-Wunused-but-set-variable]
u32 s_prediv = 1, s_postdiv = 1, s_mult = 1;
^
drivers/media/i2c/ov2659.c:912:20: warning: variable 's_postdiv' set but not used [-Wunused-but-set-variable]
u32 s_prediv = 1, s_postdiv = 1, s_mult = 1;
^
drivers/media/i2c/ov2659.c:912:6: warning: variable 's_prediv' set but not used [-Wunused-but-set-variable]
u32 s_prediv = 1, s_postdiv = 1, s_mult = 1;
^
This is likely some leftover from some past change.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Mauro Carvalho Chehab [Tue, 11 Aug 2015 15:18:31 +0000 (12:18 -0300)]
[media] ov9650: remove an extra space
drivers/media/i2c/ov9650.c:1439 ov965x_detect_sensor() warn: inconsistent indenting
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Mauro Carvalho Chehab [Tue, 11 Aug 2015 15:18:30 +0000 (12:18 -0300)]
[media] tc358743: don't use variable length array for I2C writes
drivers/media/i2c/tc358743.c:148:19: warning: Variable length array is used.
As the maximum size is 1026, we can't use dynamic var, as it
would otherwise spend 1056 bytes of the stack at i2c_wr() function.
So, allocate a buffer with the allowed maximum size together with
the state var.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Mats Randgaard <matrandg@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Mauro Carvalho Chehab [Tue, 11 Aug 2015 22:24:05 +0000 (19:24 -0300)]
[media] c8sectpfe: use a new Kconfig menu for DVB platform drivers
While this is the first DVB platform drivers, let's keep the
Kconfig options well organized, adding it on its own DVB menu.
Of course, it should depend on MEDIA_DIGITAL_TV_SUPPORT, as
this enables all DVB-related menus.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Mauro Carvalho Chehab [Tue, 11 Aug 2015 22:08:59 +0000 (19:08 -0300)]
[media] tda10071: use div_s64() when dividing a s64 integer
Otherwise, it will break on 32 bits archs.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Mauro Carvalho Chehab [Tue, 11 Aug 2015 21:58:31 +0000 (18:58 -0300)]
[media] c8sectpfe: fix pinctrl dependencies
compiling on some archs fail with:
drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c:540:8: error: implicit declaration of function ‘pinctrl_select_state’ [-Werror=implicit-function-declaration]
ret = pinctrl_select_state(fei->pinctrl, tsin->pstate);
That's due the need of including pinctrl.h header and because
CONFIG_PINCTRL needs to be true.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Shraddha Barke [Thu, 6 Aug 2015 09:54:22 +0000 (06:54 -0300)]
[media] Staging: media: lirc: use USB API functions rather than constants
This patch introduces the use of the function usb_endpoint_type.
The Coccinelle semantic patch that makes these changes is as follows:
@@ struct usb_endpoint_descriptor *epd; @@
- (epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\))
+ usb_endpoint_type(epd)
Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
pradheep [Mon, 3 Aug 2015 07:56:31 +0000 (04:56 -0300)]
[media] staging:media:lirc Remove the extra braces in if statement of lirc_imon
This patche removes the extra braces found in
drivers/staging/media/lirc/lirc_imon.c to fix the warning thrown by
checkpatch.pl
Signed-off-by: Pradheep Shrinivasan <pradheep.sh@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Zahari Doychev [Mon, 3 Aug 2015 11:57:19 +0000 (08:57 -0300)]
[media] coda: drop zero payload bitstream buffers
The buffers with zero payload are now dumped in coda_fill_bitstream and not
passed to coda_bitstream_queue. This avoids unnecessary fifo addition and
buffer sequence counter increment.
Signed-off-by: Zahari Doychev <zahari.doychev@linux.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Javier Martinez Canillas [Thu, 30 Jul 2015 16:18:36 +0000 (13:18 -0300)]
[media] staging: media: lirc: Export I2C module alias information
The I2C core always reports the MODALIAS uevent as "i2c:<client name"
regardless if the driver was matched using the I2C id_table or the
of_match_table. So the driver needs to export the I2C table and this
be built into the module or udev won't have the necessary information
to auto load the correct module when the device is added.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Javier Martinez Canillas [Thu, 30 Jul 2015 16:18:29 +0000 (13:18 -0300)]
[media] Export I2C module alias information in missing drivers
The I2C core always reports the MODALIAS uevent as "i2c:<client name"
regardless if the driver was matched using the I2C id_table or the
of_match_table. So the driver needs to export the I2C table and this
be built into the module or udev won't have the necessary information
to auto load the correct module when the device is added.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Mauro Carvalho Chehab [Tue, 11 Aug 2015 19:13:54 +0000 (16:13 -0300)]
[media] c8sectpfe: don't go past channel_data array
As reported by smatch:
drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c:365 find_channel() error: buffer overflow 'fei->channel_data' 8 <= 63
It seems that a cut-and-paste type of error occurred here:
the channel_data array size is C8SECTPFE_MAX_TSIN_CHAN, and not
C8SECTPFE_MAXCHANNEL.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Mauro Carvalho Chehab [Tue, 11 Aug 2015 19:09:21 +0000 (16:09 -0300)]
[media] c8sectpfe: Allow compiling it with COMPILE_TEST
While it won't work, it is good to allow it to build with
COMPILE_TEST, as we can check if other patches would break
compilation for this driver.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Peter Griffin [Thu, 30 Jul 2015 17:09:01 +0000 (14:09 -0300)]
[media] MAINTAINERS: Add c8sectpfe driver directory to STi section
Add the new c8sectpfe demux driver to the STi section of the
MAINTAINERS file.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Peter Griffin [Thu, 30 Jul 2015 17:09:00 +0000 (14:09 -0300)]
[media] c8sectpfe: Add Kconfig and Makefile for the driver
This patch adds the Kconfig and Makefile for the c8sectpfe driver
so it will be built. It also selects additional demodulator and tuners
which are required by the supported NIM cards.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Peter Griffin [Thu, 30 Jul 2015 17:08:59 +0000 (14:08 -0300)]
[media] c8sectpfe: Add c8sectpfe debugfs support
Some basic debugfs support to dump the IP registers. Further
statistics could easily be added in the future for example for
each enabled tsin channel we could expose number of corrupt packets
received etc.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Peter Griffin [Thu, 30 Jul 2015 17:08:58 +0000 (14:08 -0300)]
[media] c8sectpfe: Add support for various ST NIM cards
This patch adds support for the following 2 NIM cards: -
1) B2100A (2x stv0367 demods & 2x NXP tda18212 tuners)
2) STV0903-6110NIM (stv0903 demod + 6110 tuner, lnb24)
A NIM card is a cold plugable expansion card which usually
features a demodulator / tuner combination.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Peter Griffin [Thu, 30 Jul 2015 17:08:57 +0000 (14:08 -0300)]
[media] c8sectpfe: Add LDVB helper functions
These functions are used by the core code for creating the LDVB
devices and adapter.
Addtionally some older SoC's (and potentially newer ones) have different
frontend HW which would allow those devices to be easily supported
in the future by keeping the code specific to the IP separate from the
more generic code.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Peter Griffin [Thu, 30 Jul 2015 17:08:56 +0000 (14:08 -0300)]
[media] c8sectpfe: STiH407/10 Linux DVB demux support
This patch adds support for the c8sectpfe input HW found on
STiH407/410 SoC's.
It currently supports the TS input block, memdma engine
and hw PID filtering blocks of the C8SECTPFE subsystem.
The driver creates one LinuxDVB adapter, and a
demux/dvr/frontend set of devices for each tsin channel
which is specificed in the DT. It has been tested with
multiple tsin channels tuned, locked, and grabbing TS
simultaneously.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Peter Griffin [Thu, 30 Jul 2015 17:08:55 +0000 (14:08 -0300)]
[media] ARM: DT: STi: STiH407: Add c8sectpfe LinuxDVB DT node
This patch adds in the required DT node for the c8sectpfe
Linux DVB demux driver which allows the tsin channels
to be used on an upstream kernel.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Peter Griffin [Thu, 30 Jul 2015 17:08:54 +0000 (14:08 -0300)]
[media] c8sectpfe: Add DT bindings documentation for c8sectpfe driver
This patch adds the DT bindings documentation for the c8sectpfe LinuxDVB
demux driver whose IP is in the STiH407 family silicon SoC's.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Joe Perches [Thu, 30 Jul 2015 17:08:53 +0000 (14:08 -0300)]
[media] dvb-pll: Convert struct dvb_pll_desc uses to const
Convert the struct dvb_pll_desc uses to const and
change the "entries" fixed array size from 12 to []
It saves a couple KB overall and remove ~5KB of data.
$ size drivers/media/dvb-frontends/dvb-pll.o*
text data bss dec hex filename
8520 1552 2120 12192 2fa0 drivers/media/dvb-frontends/dvb-pll.o.new
5624 6363 2120 14107 371b drivers/media/dvb-frontends/dvb-pll.o.old
[PG] Patch taken from https://lkml.org/lkml/2015/6/24/721 with
commit message updated.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Michael Ira Krufky <m.krufky@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Peter Griffin [Thu, 30 Jul 2015 17:08:52 +0000 (14:08 -0300)]
[media] stv0367: Add support for 16Mhz reference clock
The B2100A dvb NIM card from ST has 2x stv0367 demodulators
and 2x TDA18212 silicon tuners, with a 16Mhz crystal. To
get this working properly with the upstream driver we need
to add support for the 16Mhz reference clock.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Peter Griffin [Thu, 30 Jul 2015 17:08:51 +0000 (14:08 -0300)]
[media] stv0367: Refine i2c error trace to include i2c address
When using stv0367 demodulator with STi STB platforms,
we can have easily have four or more stv0367 demods running
in the system at one time.
As typically the b2120 reference design ships with a b2004a daughter
board, which can accept two dvb NIM cards, and each b2100A NIM
has 2x stv0367 demods and 2x NXPs tuner on it.
In such circumstances it is useful to print the i2c address
on error messages to know which one is failing due to I2C issues.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Mauro Carvalho Chehab [Tue, 11 Aug 2015 18:36:15 +0000 (15:36 -0300)]
[media] ascot2e: don't use variable length arrays
The Linux stack is short; we need to be able to count the number
of bytes used at stack on each function. So, we don't like to
use variable-length arrays, as complained by smatch:
drivers/media/dvb-frontends/horus3a.c:57:19: warning: Variable length array is used.
The max usecase of the driver seems to be 10 bytes + 1 for the
register.
So, let's be safe and allocate 11 bytes for the write buffer.
This should be enough to cover all cases. If not, let's print
an error message.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Mauro Carvalho Chehab [Tue, 11 Aug 2015 18:29:54 +0000 (15:29 -0300)]
[media] horus3a: don't use variable length arrays
The Linux stack is short; we need to be able to count the number
of bytes used at stack on each function. So, we don't like to
use variable-length arrays, as complained by smatch:
drivers/media/dvb-frontends/horus3a.c:57:19: warning: Variable length array is used.
The max usecase of the driver seems to be 5 bytes + 1 for the
register.
So, let's be safe and allocate 6 bytes for the write buffer.
This should be enough to cover all cases. If not, let's print
an error message.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Mauro Carvalho Chehab [Tue, 11 Aug 2015 18:22:36 +0000 (15:22 -0300)]
[media] cxd2841er: don't use variable length arrays
The Linux stack is short; we need to be able to count the number
of bytes used at stack on each function. So, we don't like to
use variable-length arrays, as complained by smatch:
drivers/media/dvb-frontends/cxd2841er.c:205:19: warning: Variable length array is used.
The max usecase of the driver seems to be 15 bytes + 1 for the
register.
So, let's be safe and allocate 17 bytes for the write buffer.
This should be enough to cover all cases. If not, let's print
an error message.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Kozlov Sergey [Tue, 28 Jul 2015 14:33:04 +0000 (11:33 -0300)]
[media] netup_unidvb: NetUP Universal DVB-S/S2/T/T2/C PCI-E card driver
Add NetUP Dual Universal CI PCIe board driver.
The board has
- two CI slots
- two I2C adapters
- SPI master bus for accessing flash memory containing
FPGA firmware
No changes required.
Signed-off-by: Kozlov Sergey <serjk@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Mauro Carvalho Chehab [Tue, 11 Aug 2015 18:08:47 +0000 (15:08 -0300)]
[media] cxd2841er: declare static functions as such
drivers/media/dvb-frontends/cxd2841er.c:992:5: warning: no previous prototype for 'cxd2841er_get_carrier_offset_t2' [-Wmissing-prototypes]
int cxd2841er_get_carrier_offset_t2(
^
drivers/media/dvb-frontends/cxd2841er.c:1032:5: warning: no previous prototype for 'cxd2841er_get_carrier_offset_c' [-Wmissing-prototypes]
int cxd2841er_get_carrier_offset_c(
^
drivers/media/dvb-frontends/cxd2841er.c:1360:5: warning: no previous prototype for 'cxd2841er_read_snr_t2' [-Wmissing-prototypes]
int cxd2841er_read_snr_t2(struct cxd2841er_priv *priv, u32 *snr)
^
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Kozlov Sergey [Tue, 28 Jul 2015 14:33:03 +0000 (11:33 -0300)]
[media] cxd2841er: Sony CXD2841ER DVB-S/S2/T/T2/C demodulator driver
Add DVB-C/T/T2/S/S2 demodulator frontend driver Sony CXD2841ER chip.
Signed-off-by: Kozlov Sergey <serjk@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Kozlov Sergey [Tue, 28 Jul 2015 14:33:02 +0000 (11:33 -0300)]
[media] lnbh25: LNBH25 SEC controller driver
Add DVB SEC frontend driver for STM LNBH25PQR chip.
[mchehab@osg.samsung.com: fix merge conflict:
fe_sec_voltage_t should not be used in kernelspace anymore.
instead, it should use enum fe_sec_voltage]
Signed-off-by: Kozlov Sergey <serjk@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Kozlov Sergey [Tue, 28 Jul 2015 14:33:01 +0000 (11:33 -0300)]
[media] ascot2e: Sony Ascot2e DVB-C/T/T2 tuner driver
Add DVB-T/T2/C frontend driver for Sony Ascot2e (CXD2861ER) chip.
Signed-off-by: Kozlov Sergey <serjk@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Kozlov Sergey [Tue, 28 Jul 2015 14:33:00 +0000 (11:33 -0300)]
[media] horus3a: Sony Horus3A DVB-S/S2 tuner driver
Add DVB-S/S2 frontend driver for Sony Horus3A (CXD2832AER) chip
Signed-off-by: Kozlov Sergey <serjk@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Christian Löpke [Sat, 18 Jul 2015 07:15:01 +0000 (04:15 -0300)]
[media] Technisat SkyStar USB HD,(DVB-S/S2) too much URBs for arm devices
Using 8 URBs results in a consecutive buffer allocation of too much
memory for some arm devices.
As we use isochronuous transfers the number of URBs can be reduced
without risking data-loss.
Signed-off-by: Christian Loepke <loepke@edfritsch.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
David Härdeman [Wed, 22 Jul 2015 20:55:24 +0000 (17:55 -0300)]
[media] rc-core: improve the lirc protocol reporting
Commit
275ddb40bcf686d210d86c6718e42425a6a0bc76 removed the lirc
"protocol" but kept backwards compatibility by always listing
the protocol as present and enabled. This patch further improves
the logic by only listing the protocol if the lirc module is loaded
(or if lirc is builtin).
Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Krzysztof Kozlowski [Fri, 10 Jul 2015 06:34:28 +0000 (03:34 -0300)]
[media] staging: Drop owner assignment from i2c_driver
i2c_driver does not need to set an owner because i2c_register_driver()
will set it.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Krzysztof Kozlowski [Fri, 10 Jul 2015 06:34:26 +0000 (03:34 -0300)]
[media] staging: iio: Drop owner assignment from i2c_driver
i2c_driver does not need to set an owner because i2c_register_driver()
will set it.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Krzysztof Kozlowski [Fri, 10 Jul 2015 06:34:27 +0000 (03:34 -0300)]
[media] staging: media: Drop owner assignment from i2c_driver
i2c_driver does not need to set an owner because i2c_register_driver()
will set it.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Krzysztof Kozlowski [Fri, 10 Jul 2015 06:19:48 +0000 (03:19 -0300)]
[media] Drop owner assignment from i2c_driver
i2c_driver does not need to set an owner because i2c_register_driver()
will set it.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Krzysztof Kozlowski [Fri, 10 Jul 2015 06:19:47 +0000 (03:19 -0300)]
[media] tuners: Drop owner assignment from i2c_driver
i2c_driver does not need to set an owner because i2c_register_driver()
will set it.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Krzysztof Kozlowski [Fri, 10 Jul 2015 06:19:46 +0000 (03:19 -0300)]
[media] radio: Drop owner assignment from i2c_driver
i2c_driver does not need to set an owner because i2c_register_driver()
will set it.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Krzysztof Kozlowski [Fri, 10 Jul 2015 06:19:44 +0000 (03:19 -0300)]
[media] i2c: Drop owner assignment from i2c_driver
i2c_driver does not need to set an owner because i2c_register_driver()
will set it.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Krzysztof Kozlowski [Fri, 10 Jul 2015 06:19:43 +0000 (03:19 -0300)]
[media] dvb-frontends: Drop owner assignment from platform_driver
platform_driver does not need to set an owner because
platform_driver_register() will set it.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Krzysztof Kozlowski [Fri, 10 Jul 2015 06:19:42 +0000 (03:19 -0300)]
[media] dvb-frontends: Drop owner assignment from i2c_driver
i2c_driver does not need to set an owner because i2c_register_driver()
will set it.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Vaishali Thakkar [Fri, 26 Jun 2015 04:34:37 +0000 (01:34 -0300)]
[media] pctv452e: Replace memset with eth_zero_addr
Use eth_zero_addr to assign the zero address to the given address
array instead of memset when second argument is address of zero.
Note that the 6 in the third argument of memset appears to represent
an ethernet address size (ETH_ALEN).
The Coccinelle semantic patch that makes this change is as follows:
// <smpl>
@eth_zero_addr@
expression e;
@@
-memset(e,0x00,6);
+eth_zero_addr(e);
// </smpl>
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Geert Uytterhoeven [Mon, 29 Jun 2015 13:46:49 +0000 (10:46 -0300)]
[media] tuners: Make all TV tuners visible if COMPILE_TEST=y
Make the TV tuners menu visible when compile-testing, to allow
selecting additional drivers on top of the drivers that are already
automatically selected if MEDIA_SUBDRV_AUTOSELECT is enabled.
Without this, many drivers stay disabled during e.g. allmodconfig.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Vaishali Thakkar [Fri, 26 Jun 2015 04:47:49 +0000 (01:47 -0300)]
[media] ttpci: Replace memset with eth_zero_addr
Use eth_zero_addr to assign the zero address to the given address
array instead of memset when second argument is address of zero.
Note that the 6 in the third argument of memset appears to represent
an ethernet address size (ETH_ALEN).
The Coccinelle semantic patch that makes this change is as follows:
// <smpl>
@eth_zero_addr@
expression e;
@@
-memset(e,0x00,6);
+eth_zero_addr(e);
// </smpl>
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Maninder Singh [Thu, 25 Jun 2015 09:58:58 +0000 (06:58 -0300)]
[media] usb/airspy: removing unneeded goto
This patch removes unneded goto,
reported by coccinelle.
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Reviewed-by: Akhilesh Kumar <akhilesh.k@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Geert Uytterhoeven [Mon, 29 Jun 2015 13:46:48 +0000 (10:46 -0300)]
[media] i2c: Make all i2c devices visible if COMPILE_TEST=y
Make the i2c devices menu visible when compile-testing, to allow
selecting additional drivers on top of the drivers that are already
automatically selected if MEDIA_SUBDRV_AUTOSELECT is enabled.
Without this, many drivers stay disabled during e.g. allmodconfig.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Geert Uytterhoeven [Mon, 29 Jun 2015 13:46:47 +0000 (10:46 -0300)]
[media] dvb-frontends: Make all DVB Frontends visible if COMPILE_TEST=y
Make the DVB Frontends menu visible when compile-testing, to allow
selecting additional drivers on top of the drivers that are already
automatically selected if MEDIA_SUBDRV_AUTOSELECT is enabled.
Without this, many drivers stay disabled during e.g. allmodconfig.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Luis R. Rodriguez [Wed, 24 Jun 2015 17:23:20 +0000 (14:23 -0300)]
[media] x86/mm/pat, drivers/media/ivtv: move pat warn and replace WARN() with pr_warn()
On built-in kernels this warning will always splat as this is part
of the module init. Fix that by shifting the PAT requirement check
out under the code that does the "quasi-probe" for the device. This
device driver relies on an existing driver to find its own devices,
it looks for that device driver and its own found devices, then
uses driver_for_each_device() to try to see if it can probe each of
those devices as a frambuffer device with ivtvfb_init_card(). We
tuck the PAT requiremenet check then on the ivtvfb_init_card()
call making the check at least require an ivtv device present
before complaining.
Reported-by: Fengguang Wu <fengguang.wu@intel.com> [0-day test robot]
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Antonio Borneo [Tue, 23 Jun 2015 14:53:19 +0000 (11:53 -0300)]
[media] s5c73m3: Remove redundant spi driver bus initialization
In ancient times it was necessary to manually initialize the bus
field of an spi_driver to spi_bus_type. These days this is done in
spi_register_driver(), so we can drop the manual assignment.
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Krzysztof Hałasa [Fri, 19 Jun 2015 10:20:40 +0000 (07:20 -0300)]
[media] pci/Kconfig: don't use MEDIA_ANALOG_TV_SUPPORT for grabber cards
I noticed certain cards are currently under MEDIA_ANALOG_TV_SUPPORT
but it seems they are frame grabbers (with CVBS, Svideo etc. inputs)
rather than TV receivers (with analog TV tuners).
MEDIA_CAMERA_SUPPORT maybe isn't the best name (only "meye" driver seems
to drive a real camera in a laptop) but it at least doesn't select the
TUNERs.
Perhaps the following patch would make sense.
Signed-off-by: Krzysztof Ha?asa <khalasa@piap.pl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Mauro Carvalho Chehab [Tue, 11 Aug 2015 13:30:24 +0000 (10:30 -0300)]
[media] mantis: remove an uneeded goto
Gotos makes a little harder to check the code. In this
particular case, the goto is doing nothing but jumping into
a return.
Instead, just replace the goto by the return, making it
simpler.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Fabio Estevam [Mon, 10 Aug 2015 17:11:41 +0000 (14:11 -0300)]
[media] mantis: Fix error handling in mantis_dma_init()
Current code assigns 0 to variable 'err', which makes mantis_dma_init()
to return success even if mantis_alloc_buffers() fails.
Fix it by checking the return value from mantis_alloc_buffers() and
propagating it in the case of error.
Reported-by: RUC_Soft_Sec <zy900702@163.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Tue, 28 Jul 2015 08:33:55 +0000 (05:33 -0300)]
[media] mt9v032: fix uninitialized variable warning
drivers/media/i2c/mt9v032.c: In function ‘mt9v032_probe’:
CC [M] drivers/media/i2c/s5k4ecgx.o
drivers/media/i2c/mt9v032.c:996:20: warning: ‘pdata’ may be used uninitialized in this function [-Wmaybe-uninitialized]
if (pdata && pdata->link_freqs) {
^
It can indeed be uninitialized in one corner case. Initialize to NULL.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Philipp Zabel [Thu, 6 Aug 2015 12:38:02 +0000 (09:38 -0300)]
[media] v4l2: move tracepoint generation into separate file
To compile videobuf2-core as a module, the vb2_* tracepoints must be
exported from the videodev module. Instead of exporting vb2 tracepoint
symbols from v4l2-ioctl.c, move the tracepoint generation into a separate
file. This patch fixes the following build error in the modpost stage,
introduced by
2091f5181c66 ("[media] videobuf2: add trace events"):
ERROR: "__tracepoint_vb2_buf_done" undefined!
ERROR: "__tracepoint_vb2_dqbuf" undefined!
ERROR: "__tracepoint_vb2_qbuf" undefined!
ERROR: "__tracepoint_vb2_buf_queue" undefined!
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Prashant Laddha [Mon, 3 Aug 2015 08:36:43 +0000 (05:36 -0300)]
[media] vivid: support cvt, gtf timings for video out
The generation of cvt, gtf timings is already supported by v4l2-ctl.
This patch adds support for setting cvt,gtf timings for video out.
While enabling cvt,gtf in vivid capture, the vivid video out was
missed out. Adding it now.
Signed-off-by: Prashant Laddha <prladdha@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
William Towle [Thu, 23 Jul 2015 12:21:34 +0000 (09:21 -0300)]
[media] media: adv7604: reduce support to first (digital) input
Using adv7611_read_cable_det() for ADV7612 means that full
support for '.max_port = ADV7604_PAD_HDMI_PORT_B,' isn't available
due to the need for multiple port reads to determine cable detection,
and an agreed mechanism for communicating the separate statuses.
This patch replaces adv7611_read_cable_det() with a functionally
identical copy, commented appropriately.
Earlier submissions [leading to commit
8331d30b] also set .cp_csc,
which is used in a cp_read() call within adv76xx_log_status().
Signed-off-by: William Towle <william.towle@codethink.co.uk>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
William Towle [Thu, 23 Jul 2015 12:21:33 +0000 (09:21 -0300)]
[media] media: adv7604: fix probe of ADV7611/7612
Prior to commit
f862f57d ("[media] media: i2c: ADV7604: Migrate to
regmap"), the local variable 'val' contained the combined register
reads used in the chipset version ID test. Restore this expectation
so that the comparison works as it used to.
Signed-off-by: William Towle <william.towle@codethink.co.uk>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 15 Jun 2015 11:33:40 +0000 (08:33 -0300)]
[media] soc_camera: always release queue for queue owner
Always release the queue if the owner closes its filehandle and not when
it is the last open filehandle.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 15 Jun 2015 11:33:39 +0000 (08:33 -0300)]
[media] soc_camera: pass on streamoff error
If streamoff returned an error, then pass that on to the caller.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 15 Jun 2015 11:33:38 +0000 (08:33 -0300)]
[media] soc_camera: compliance fixes
- REQBUFS(0) will stop streaming, free buffers and release the file ownership.
- Return ENOTTY for create_bufs for a vb1 driver
- Return EBUSY if there is a different streaming owner and set the new owner on
success.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 15 Jun 2015 11:33:37 +0000 (08:33 -0300)]
[media] soc_camera: fix expbuf support
- For vb1 drivers just return -ENOTTY.
- For vb2 drivers allow vb2_expbuf without there being a stream owner:
the vb2_expbuf function will return the correct error message in that case.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 15 Jun 2015 11:33:36 +0000 (08:33 -0300)]
[media] soc_camera: fix enum_input
Fill in the std field from the video_device tvnorms field.
This fixes a v4l2-compliance failure.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Rob Taylor <rob.taylor@codethink.co.uk>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 15 Jun 2015 11:33:35 +0000 (08:33 -0300)]
[media] sh_mobile_ceu_camera: set field to FIELD_NONE
Make sure that 'field' isn't FIELD_ANY when the driver is
first loaded. Fixes a v4l2-compliance failure.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 15 Jun 2015 11:33:34 +0000 (08:33 -0300)]
[media] sh_mobile_ceu_camera: fix querycap
Fill in the bus_info and driver fields. Found by v4l2-compliance.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 15 Jun 2015 11:33:33 +0000 (08:33 -0300)]
[media] mt9t112: JPEG -> SRGB
The JPEG colorspace should only be used for JPEG encoded images. This is
just a regular sRGB sensor.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 15 Jun 2015 11:33:32 +0000 (08:33 -0300)]
[media] ak881x: simplify standard checks
Simplify confusing conditions. This also swaps the checks for NTSC and PAL:
to be consistent with other drivers check for NTSC first. So if the user
sets both NTSC and PAL bits, then NTSC wins.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 15 Jun 2015 11:33:31 +0000 (08:33 -0300)]
[media] tw9910: init priv->scale and update standard
When the standard changes the VACTIVE and VDELAY values need to be updated.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 15 Jun 2015 11:33:30 +0000 (08:33 -0300)]
[media] tw9910: don't use COLORSPACE_JPEG
This is an SDTV video receiver, so the colorspace should be SMPTE170M.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 15 Jun 2015 11:33:28 +0000 (08:33 -0300)]
[media] sh-veu: initialize timestamp_flags and copy timestamp info
This field wasn't set, causing WARN_ON's from the vb2 core.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Antti Palosaari [Tue, 21 Apr 2015 14:14:44 +0000 (11:14 -0300)]
[media] tda10071: implement DVBv5 statistics
Implement DVBv5 CNR, signal strength, BER and block errors.
Wrap legacy DVBv3 statistics to DVBv5 internally.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Antti Palosaari [Tue, 21 Apr 2015 14:16:44 +0000 (11:16 -0300)]
[media] tda10071: do not get_frontend() when not ready
This is a bit hack, but returning error when driver is not tuned yet
causes DVBv5 zap stop polling DVBv5 statistics. Thus return 0 even
callback is called during invalid device state.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Antti Palosaari [Tue, 21 Apr 2015 12:58:15 +0000 (09:58 -0300)]
[media] tda10071: protect firmware command exec with mutex
There should be clearly some lock in order to make sure firmware
command in execution is not disturbed by another command. It has
worked as callbacks are serialized somehow pretty well and command
execution happens usually without any delays.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Antti Palosaari [Tue, 21 Apr 2015 01:21:44 +0000 (22:21 -0300)]
[media] tda10071: convert to regmap I2C API
Use regmap API for I2C operations.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Antti Palosaari [Mon, 20 Apr 2015 23:04:00 +0000 (20:04 -0300)]
[media] tda10071: rename device state struct to dev
Rename device state struct from 'priv' to 'dev'.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Antti Palosaari [Mon, 20 Apr 2015 22:54:56 +0000 (19:54 -0300)]
[media] tda10071: remove legacy media attach
All users are now using I2C binding and old attach could be removed.
Use I2C client for proper logging at the same.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Antti Palosaari [Mon, 20 Apr 2015 21:57:03 +0000 (18:57 -0300)]
[media] a8293: coding style issues
Remove FSF address from license. Indent parameter correctly.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Antti Palosaari [Mon, 20 Apr 2015 21:47:44 +0000 (18:47 -0300)]
[media] a8293: improve LNB register programming logic
On power-on LNB power supply voltage is disabled, due to that no
need to disable it during probe. Tone is supply is hard-coded as
external tone coming from the demodulator. Program both voltage
and tone on set_voltage(). Use register cache to prevent unneeded
programming.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Antti Palosaari [Mon, 20 Apr 2015 21:16:19 +0000 (18:16 -0300)]
[media] a8293: use i2c_master_send / i2c_master_recv for I2C I/O
As driver is now proper I2C client driver, we could use correct
functions for I2C I/O. Also rename state from priv to dev. Fix
logging too.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Antti Palosaari [Mon, 20 Apr 2015 20:39:33 +0000 (17:39 -0300)]
[media] a8293: remove legacy media attach
Remove legacy media attach as all users are on I2C bindings now.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This page took 0.044777 seconds and 5 git commands to generate.