Linus Torvalds [Thu, 20 May 2010 16:37:45 +0000 (09:37 -0700)]
Merge branch 'v4l_for_2.6.35' of git://git./linux/kernel/git/mchehab/linux-2.6
* 'v4l_for_2.6.35' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (534 commits)
V4L/DVB (13554a): v4l: Use the video_drvdata function in drivers
V4L/DVB: vivi and mem2mem_testdev need slab.h to build
V4L/DVB: tm6000: bugfix image position
V4L/DVB: IR/imon: remove dead IMON_KEY_RELEASE_OFFSET
V4L/DVB: tm6000: README - add vbi
V4L/DVB: Fix unlock logic at medusa_video_init
V4L/DVB: fix dvb frontend lockup
V4L/DVB: s2255drv: remove dead code
V4L/DVB: s2255drv: return if vdev not found
V4L/DVB: ov511: cleanup: remove unneeded null check
V4L/DVB: media/mem2mem: dereferencing free memory
V4L/DVB: media/IR: Add missing include file to rc-map.c
V4L/DVB: dvb/stv6110x: cleanup error handling
V4L/DVB: ngene: Add lgdt3303 and mt2131 deps to Kconfig
V4L/DVB: ngene: start separating out DVB functions into separate file
V4L/DVB: ngene: split out card specific code into a separate file
V4L/DVB: ngene: split out i2c code into a separate file
V4L/DVB: ngene: add initial support for digital side of Avermedia m780
V4L/DVB: ngene: properly support boards where channel 0 isn't a TS input
V4L-DVB: ngene: make sure that tuner headers are included
...
Linus Torvalds [Thu, 20 May 2010 16:27:37 +0000 (09:27 -0700)]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (49 commits)
libata-sff: separate out BMDMA qc_issue
libata-sff: prd is BMDMA specific
libata-sff: ata_sff_[dumb_]qc_prep are BMDMA specific
libata-sff: separate out BMDMA EH
libata-sff: port_task is SFF specific
libata-sff: ap->[last_]ctl are SFF specific
libata-sff: rename ap->ops->drain_fifo() to sff_drain_fifo()
libata-sff: introduce ata_sff_init/exit() and ata_sff_port_init()
libata-sff: clean up BMDMA initialization
libata-sff: clean up inheritance in several drivers
libata-sff: reorder SFF/BMDMA functions
sata_inic162x: kill PORT_PRD_ADDR initialization
libata: kill ATA_FLAG_DISABLED
libata-sff: kill unused prototype and make ata_dev_select() static
libata-sff: update bmdma host bus error handling
sata_mv: remove unnecessary initialization
sata_inic162x: inic162x is not dependent on CONFIG_ATA_SFF
pata_sch: use ata_pci_sff_init_one()
pata_sil680: Do our own exec_command posting
libata: Remove excess delay in the tf_load path
...
Linus Torvalds [Thu, 20 May 2010 16:20:59 +0000 (09:20 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (44 commits)
vlynq: make whole Kconfig-menu dependant on architecture
add descriptive comment for TIF_MEMDIE task flag declaration.
EEPROM: max6875: Header file cleanup
EEPROM: 93cx6: Header file cleanup
EEPROM: Header file cleanup
agp: use NULL instead of 0 when pointer is needed
rtc-v3020: make bitfield unsigned
PCI: make bitfield unsigned
jbd2: use NULL instead of 0 when pointer is needed
cciss: fix shadows sparse warning
doc: inode uses a mutex instead of a semaphore.
uml: i386: Avoid redefinition of NR_syscalls
fix "seperate" typos in comments
cocbalt_lcdfb: correct sections
doc: Change urls for sparse
Powerpc: wii: Fix typo in comment
i2o: cleanup some exit paths
Documentation/: it's -> its where appropriate
UML: Fix compiler warning due to missing task_struct declaration
UML: add kernel.h include to signal.c
...
Linus Torvalds [Thu, 20 May 2010 16:09:46 +0000 (09:09 -0700)]
Merge git://git./linux/kernel/git/brodo/pcmcia-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (29 commits)
pcmcia: disable PCMCIA ioctl also for ARM
drivers/staging/comedi: dev_node removal (quatech_daqp_cs)
drivers/staging/comedi: dev_node removal (ni_mio_cs)
drivers/staging/comedi: dev_node removal (ni_labpc_cs)
drivers/staging/comedi: dev_node removal (ni_daq_dio24)
drivers/staging/comedi: dev_node removal (ni_daq_700)
drivers/staging/comedi: dev_node removal (das08_cs)
drivers/staging/comedi: dev_node removal (cb_das16_cs)
pata_pcmcia: get rid of extra indirection
pcmcia: remove suspend-related comment from yenta_socket.c
pcmcia: call pcmcia_{read,write}_cis_mem with ops_mutex held
pcmcia: remove pcmcia_add_device_lock
pcmcia: update gfp/slab.h includes
pcmcia: remove unused mem_op.h
pcmcia: do not autoadd root PCI bus resources
pcmcia: clarify alloc_io_space, move it to resource handlers
pcmcia: move all pcmcia_resource_ops providers into one module
pcmcia: move high level CIS access code to separate file
pcmcia: dev_node removal (core)
pcmcia: dev_node removal (remaining drivers)
...
Linus Torvalds [Thu, 20 May 2010 16:03:55 +0000 (09:03 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/rafael/suspend-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
PM: PM QOS update fix
Freezer / cgroup freezer: Update stale locking comments
PM / platform_bus: Allow runtime PM by default
i2c: Fix bus-level power management callbacks
PM QOS update
PM / Hibernate: Fix block_io.c printk warning
PM / Hibernate: Group swap ops
PM / Hibernate: Move the first_sector out of swsusp_write
PM / Hibernate: Separate block_io
PM / Hibernate: Snapshot cleanup
FS / libfs: Implement simple_write_to_buffer
PM / Hibernate: document open(/dev/snapshot) side effects
PM / Runtime: Add sysfs debug files
PM: Improve device power management document
PM: Update device power management document
PM: Allow runtime_suspend methods to call pm_schedule_suspend()
PM: pm_wakeup - switch to using bool
Linus Torvalds [Thu, 20 May 2010 16:03:02 +0000 (09:03 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tj/wq
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: change cancel_work_sync() to clear work->data
workqueue: warn about flush_scheduled_work()
Linus Torvalds [Thu, 20 May 2010 16:02:49 +0000 (09:02 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tj/percpu
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
ia64: add sparse annotation to __ia64_per_cpu_var()
percpu: implement kernel memory based chunk allocation
percpu: move vmalloc based chunk management into percpu-vm.c
percpu: misc preparations for nommu support
percpu: reorganize chunk creation and destruction
percpu: factor out pcpu_addr_in_first/reserved_chunk() and update per_cpu_ptr_to_phys()
Linus Torvalds [Thu, 20 May 2010 16:00:34 +0000 (09:00 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
IB/core: Use kmemdup() instead of kmalloc()+memcpy()
IB/iser: Fix error flow in iser_create_ib_conn_res()
IB/iser: Enhance disconnection logic for multi-pathing
IB/iser: Remove buggy back-pointer setting
IB/iser: Add asynchronous event handler
MAINTAINERS: Add cxgb4 and iw_cxgb4 entries
RDMA/cxgb3: Shrink .text with compile-time init of handlers arrays
IPoIB: Allow disabling/enabling TSO on the fly through ethtool
IB/mlx4: Add support for masked atomic operations
IB/core: Add support for masked atomic operations
RDMA/cma: Randomize local port allocation
RDMA/nes: Make unnecessarily global functions static
RDMA/nes: Make nesadapter->phy_lock usage consistent
RDMA/cxgb4: Add driver for Chelsio T4 RNIC
IB/mthca: Use the dma state API instead of pci equivalents
RDMA/amso1100: Use the dma state API instead of pci equivalents
RDMA/cxgb3: Don't free skbs on NET_XMIT_* indications from LLD
RDMA/cxgb3: Use the dma state API instead of pci equivalents
IB: Explicitly rule out llseek to avoid BKL in default_llseek()
Linus Torvalds [Thu, 20 May 2010 15:55:50 +0000 (08:55 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/security-testing-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (61 commits)
KEYS: Return more accurate error codes
LSM: Add __init to fixup function.
TOMOYO: Add pathname grouping support.
ima: remove ACPI dependency
TPM: ACPI/PNP dependency removal
security/selinux/ss: Use kstrdup
TOMOYO: Use stack memory for pending entry.
Revert "ima: remove ACPI dependency"
Revert "TPM: ACPI/PNP dependency removal"
KEYS: Do preallocation for __key_link()
TOMOYO: Use mutex_lock_interruptible.
KEYS: Better handling of errors from construct_alloc_key()
KEYS: keyring_serialise_link_sem is only needed for keyring->keyring links
TOMOYO: Use GFP_NOFS rather than GFP_KERNEL.
ima: remove ACPI dependency
TPM: ACPI/PNP dependency removal
selinux: generalize disabling of execmem for plt-in-heap archs
LSM Audit: rename LSM_AUDIT_NO_AUDIT to LSM_AUDIT_DATA_NONE
CRED: Holding a spinlock does not imply the holding of RCU read lock
SMACK: Don't #include Ext2 headers
...
Linus Torvalds [Thu, 20 May 2010 00:24:54 +0000 (17:24 -0700)]
Merge branch 'for-2.6.35' of git://linux-nfs.org/~bfields/linux
* 'for-2.6.35' of git://linux-nfs.org/~bfields/linux: (45 commits)
Revert "nfsd4: distinguish expired from stale stateids"
nfsd: safer initialization order in find_file()
nfs4: minor callback code simplification, comment
NFSD: don't report compiled-out versions as present
nfsd4: implement reclaim_complete
nfsd4: nfsd4_destroy_session must set callback client under the state lock
nfsd4: keep a reference count on client while in use
nfsd4: mark_client_expired
nfsd4: introduce nfs4_client.cl_refcount
nfsd4: refactor expire_client
nfsd4: extend the client_lock to cover cl_lru
nfsd4: use list_move in move_to_confirmed
nfsd4: fold release_session into expire_client
nfsd4: rename sessionid_lock to client_lock
nfsd4: fix bare destroy_session null dereference
nfsd4: use local variable in nfs4svc_encode_compoundres
nfsd: further comment typos
sunrpc: centralise most calls to svc_xprt_received
nfsd4: fix unlikely race in session replay case
nfsd4: fix filehandle comment
...
Linus Torvalds [Thu, 20 May 2010 00:24:05 +0000 (17:24 -0700)]
Merge branch 'nfs-for-2.6.35' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6
* 'nfs-for-2.6.35' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (78 commits)
SUNRPC: Don't spam gssd with upcall requests when the kerberos key expired
SUNRPC: Reorder the struct rpc_task fields
SUNRPC: Remove the 'tk_magic' debugging field
SUNRPC: Move the task->tk_bytes_sent and tk_rtt to struct rpc_rqst
NFS: Don't call iput() in nfs_access_cache_shrinker
NFS: Clean up nfs_access_zap_cache()
NFS: Don't run nfs_access_cache_shrinker() when the mask is GFP_NOFS
SUNRPC: Ensure rpcauth_prune_expired() respects the nr_to_scan parameter
SUNRPC: Ensure memory shrinker doesn't waste time in rpcauth_prune_expired()
SUNRPC: Dont run rpcauth_cache_shrinker() when gfp_mask is GFP_NOFS
NFS: Read requests can use GFP_KERNEL.
NFS: Clean up nfs_create_request()
NFS: Don't use GFP_KERNEL in rpcsec_gss downcalls
NFSv4: Don't use GFP_KERNEL allocations in state recovery
SUNRPC: Fix xs_setup_bc_tcp()
SUNRPC: Replace jiffies-based metrics with ktime-based metrics
ktime: introduce ktime_to_ms()
SUNRPC: RPC metrics and RTT estimator should use same RTT value
NFS: Calldata for nfs4_renew_done()
NFS: Squelch compiler warning in nfs_add_server_stats()
...
Linus Torvalds [Thu, 20 May 2010 00:23:28 +0000 (17:23 -0700)]
Merge branch 'bkl/procfs' of git://git./linux/kernel/git/frederic/random-tracing
* 'bkl/procfs' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing:
sunrpc: Include missing smp_lock.h
procfs: Kill the bkl in ioctl
procfs: Push down the bkl from ioctl
procfs: Use generic_file_llseek in /proc/vmcore
procfs: Use generic_file_llseek in /proc/kmsg
procfs: Use generic_file_llseek in /proc/kcore
procfs: Kill BKL in llseek on proc base
Linus Torvalds [Thu, 20 May 2010 00:11:10 +0000 (17:11 -0700)]
Merge branch 'timers-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
clocksource: Add clocksource_register_hz/khz interface
posix-cpu-timers: Optimize run_posix_cpu_timers()
time: Remove xtime_cache
mqueue: Convert message queue timeout to use hrtimers
hrtimers: Provide schedule_hrtimeout for CLOCK_REALTIME
timers: Introduce the concept of timer slack for legacy timers
ntp: Remove tickadj
ntp: Make time_adjust static
time: Add xtime, wall_to_monotonic to feature-removal-schedule
timer: Try to survive timer callback preempt_count leak
timer: Split out timer function call
timer: Print function name for timer callbacks modifying preemption count
time: Clean up warp_clock()
cpu-timers: Avoid iterating over all threads in fastpath_timer_check()
cpu-timers: Change SIGEV_NONE timer implementation
cpu-timers: Return correct previous timer reload value
cpu-timers: Cleanup arm_timer()
cpu-timers: Simplify RLIMIT_CPU handling
Linus Torvalds [Thu, 20 May 2010 00:10:57 +0000 (17:10 -0700)]
Merge branch 'timers-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
cs5535-clockevt: Free timer in IRQ setup error path
Linus Torvalds [Thu, 20 May 2010 00:10:24 +0000 (17:10 -0700)]
Merge branch 'timers-for-linus-hpet' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'timers-for-linus-hpet' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, hpet: Add reference to chipset erratum documentation for disable-hpet-msi-quirk
x86, hpet: Restrict read back to affected ATI chipsets
Linus Torvalds [Thu, 20 May 2010 00:10:06 +0000 (17:10 -0700)]
Merge branch 'timers-for-linus-cleanups' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'timers-for-linus-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
avr32: Fix typo in read_persistent_clock()
sparc: Convert sparc to use read/update_persistent_clock
cris: Convert cris to use read/update_persistent_clock
m68k: Convert m68k to use read/update_persistent_clock
m32r: Convert m32r to use read/update_peristent_clock
blackfin: Convert blackfin to use read/update_persistent_clock
ia64: Convert ia64 to use read/update_persistent_clock
avr32: Convert avr32 to use read/update_persistent_clock
h8300: Convert h8300 to use read/update_persistent_clock
frv: Convert frv to use read/update_persistent_clock
mn10300: Convert mn10300 to use read/update_persistent_clock
alpha: Convert alpha to use read/update_persistent_clock
xtensa: Fix unnecessary setting of xtime
time: Clean up direct xtime usage in xen
Linus Torvalds [Thu, 20 May 2010 00:09:40 +0000 (17:09 -0700)]
Merge branch 'irq-core-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
genirq: Clear CPU mask in affinity_hint when none is provided
genirq: Add CPU mask affinity hint
genirq: Remove IRQF_DISABLED from core code
genirq: Run irq handlers with interrupts disabled
genirq: Introduce request_any_context_irq()
genirq: Expose irq_desc->node in proc/irq
Fixed up trivial conflicts in Documentation/feature-removal-schedule.txt
Linus Torvalds [Wed, 19 May 2010 20:35:07 +0000 (13:35 -0700)]
Merge branch 'msm-core' of git://codeaurora.org/quic/kernel/dwalker/linux-msm
* 'msm-core' of git://codeaurora.org/quic/kernel/dwalker/linux-msm: (72 commits)
msm: 7x30 Kconfig and makefile changes
msm: clock support for the MSM7x30 CPU.
msm: physical offset for MSM7X30
msm: io: add io support for 7x30
msm: Add extern for 7x30 clock list.
msm: dma: add 7x30 security domain abstraction
msm: update basic board layout for MSM7x30
msm: add devices-msm7x30.c
msm: add msm_iomap-7x30.h for MSM7x30 support
msm: irqs: add irqs-7x30.h for MSM7x30 support
msm: 8x50 Kconfig changes
msm: physical offset for QSD8x50
msm: io: add io support for 8x50
msm: add extern for 8x50 clock list.
msm: add devices-qsd8x50.c
msm: update basic board layout for QSD8x50
msm: add msm_iomap-8x50.h for QSD8x50 support
msm: irqs: add irqs-8x50.h for QSD8x50 support
msm: timer: allow MSM_DGT_BASE to be overriden
msm: add Qualcomm 7x30 interrupt controller driver.
...
Linus Torvalds [Wed, 19 May 2010 20:34:20 +0000 (13:34 -0700)]
Merge git://git./linux/kernel/git/davem/sparc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
sparc: Define ARCH_SLAB_MINALIGN
drivers/sbus/char/flash.c: flash_read should update ppos instead of file->f_pos
sparc64: Fix stack dumping and tracing when function graph is enabled.
sparc64: Show stack backtrace from show_regs() just like other platforms.
Linus Torvalds [Wed, 19 May 2010 19:08:50 +0000 (12:08 -0700)]
Merge branch 'davinci-for-linus' of git://git./linux/kernel/git/khilman/linux-davinci
* 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: (48 commits)
Revert "rtc: omap: let device wakeup capability be configured from chip init logic"
DM365: Added more PINMUX configurations for AEMIF
DM365: Make CLKOUTx available
DM365: Added PINMUX definitions for GPIO30..32
Davinci: iotable based ioremap() interception
Davinci: pinmux - use ioremap()
Davinci: aintc/cpintc - use ioremap()
Davinci: psc - use ioremap()
Davinci: timer - use ioremap()
Davinci: jtag_id - use ioremap()
Davinci: da8xx: rtc - use ioremap
Davinci: gpio - use ioremap()
davinci: edma: fix coding style issue related to breaking lines
davinci: edma: use BIT() wherever possible
davinci: edma: fix coding style issue related to usage of braces
davinci: edma: use a more intuitive name for edma_info
Davinci: serial - conditional reset via pwremu
Davinci: serial - use ioremap()
Davinci: serial - remove unnecessary define
Davinci: watchdog reset separation across socs
...
Fix up trivial conflict in arch/arm/Kconfig due to removal of "select
GENERIC_TIME"
Linus Torvalds [Wed, 19 May 2010 18:49:33 +0000 (11:49 -0700)]
Merge branch 'for-linus/samsung4' of git://git.fluff.org/bjdooks/linux
* 'for-linus/samsung4' of git://git.fluff.org/bjdooks/linux: (98 commits)
Input: s3c24xx_ts - depend on SAMSUNG_DEV_TS and update menu entry
Input: s3c24xx_ts - Add FEAT for Samsung touchscreen support
Input: s3c24xx_ts - Implement generic GPIO configuration callback
ARM: SAMSUNG: Move s3c64xx dev-ts.c to plat-samsung and rename configuration
ARM: SAMSUNG: Implements cfg_gpio function for Samsung touchscreen
ARM: S3C64XX: Add touchscreen platform device definition
ARM: SAMSUNG: Move mach/ts.h to plat/ts.h
ARM: S5PC100: Move i2c helpers from plat-s5pc1xx to mach-s5pc100
ARM: S5PC100: Move frame buffer helpers from plat-s5pc1xx to mach-s5pc100
ARM: S5PC100: gpio.h cleanup
ARM: S5PC100: Move gpio support from plat-s5pc1xx to mach-s5pc100
ARM: S5PC100: Use common functions for gpiolib implementation
drivers: serial: S5PC100 serial driver cleanup
ARM: S5PC100: Pre-requisite clock patch for plat-s5pc1xx to plat-s5p move
ARM: SAMSUNG: Copy common I2C0 device helpers to machine directories
ARM: SAMSUNG: move driver strength gpio configuration helper to common dir
ARM: S5PV210: Add GPIOlib support
ARM: SAMSUNGy: fix broken timer irq base
ARM: SMDK6440: Add audio devices on board
ARM: S5P6440: Add audio platform devices
...
KOSAKI Motohiro [Wed, 19 May 2010 00:37:41 +0000 (09:37 +0900)]
cpumask: fix compat getaffinity
Commit
a45185d2d "cpumask: convert kernel/compat.c" broke libnuma, which
abuses sched_getaffinity to find out NR_CPUS in order to parse
/sys/devices/system/node/node*/cpumap.
On NUMA systems with less than 32 possibly CPUs, the current
compat_sys_sched_getaffinity now returns '4' instead of the actual
NR_CPUS/8, which makes libnuma bail out when parsing the cpumap.
The libnuma call sched_getaffinity(0, bitmap, 4096) at first. It mean
the libnuma expect the return value of sched_getaffinity() is either len
argument or NR_CPUS. But it doesn't expect to return nr_cpu_ids.
Strictly speaking, userland requirement are
1) Glibc assume the return value mean the lengh of initialized
of mask argument. E.g. if sched_getaffinity(1024) return 128,
glibc make zero fill rest 896 byte.
2) Libnuma assume the return value can be used to guess NR_CPUS
in kernel. It assume len-arg<NR_CPUS makes -EINVAL. But
it try len=4096 at first and 4096 is always bigger than
NR_CPUS. Then, if we remove strange min_length normalization,
we never hit -EINVAL case.
sched_getaffinity() already solved this issue. This patch adapts
compat_sys_sched_getaffinity() to match the non-compat case.
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Ken Werner <ken.werner@web.de>
Cc: stable@kernel.org
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 19 May 2010 18:41:52 +0000 (11:41 -0700)]
Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
[IA64] Drop duplicated "config IOMMU_HELPER"
[IA64] invoke oom-killer from page fault
[IA64] use __ratelimit
[IA64] Use set_cpus_allowed_ptr
[IA64] Use set_cpus_allowed_ptr
[IA64] arch/ia64/hp/common/sba_iommu.c: Rename dev_info to adi
[IA64] removing redundant ifdef
Linus Torvalds [Wed, 19 May 2010 18:37:22 +0000 (11:37 -0700)]
Merge branch 'devel' of /home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (224 commits)
ARM: remove 'select GENERIC_TIME'
ARM: 6136/1: ARCH_REQUIRE_GPIOLIB selects GENERIC_GPIO
ARM: 6074/1: oprofile: convert from sysdev to platform device
ARM: 6073/1: oprofile: remove old files and update KConfig
ARM: 6072/1: oprofile: use perf-events framework as backend
ARM: 6071/1: perf-events: allow modules to query the number of hardware counters
ARM: 6070/1: perf-events: add support for xscale PMUs
ARM: 6069/1: perf-events: use numeric ID to identify PMU
ARM: 6064/1: pmu: register IRQs at runtime
ARM: Optionally allow ARMv6 to use 'normal, bufferable' memory for DMA
ARM: 6134/1: Handle instruction cache maintenance fault properly
ARM: nwfpe: allow debugging output to be configured at runtime
ARM: rename mach_cpu_disable() to platform_cpu_disable()
ARM: 6132/1: PL330: Add common core driver
ARM: 6094/1: Extend cache-l2x0 to support the 16-way PL310
ARM: Move memory mapping into mmu.c
ARM: Ensure meminfo is sorted prior to sanity_check_meminfo
ARM: Remove useless linux/bootmem.h includes
ARM: convert /proc/cpu/aligment to seq_file
arm: use asm-generic/scatterlist.h
...
Kevin Hilman [Wed, 19 May 2010 18:37:20 +0000 (11:37 -0700)]
Revert "rtc: omap: let device wakeup capability be configured from chip init logic"
This reverts commit
9c0a342c45b2d98209ac473ea7a429ddd5c1b473 because
it was included without proper signoffs from RTC maintainers.
Linus Torvalds [Wed, 19 May 2010 18:36:03 +0000 (11:36 -0700)]
Merge git://git./linux/kernel/git/lethal/sh-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (127 commits)
sh: update defconfigs.
sh: Fix up the NUMA build for recent LMB changes.
sh64: provide a stub per_cpu_trap_init() definition.
sh: fix up CONFIG_KEXEC=n build.
sh: fixup the docbook paths for clock framework shuffling.
driver core: Early dev_name() depends on slab_is_available().
sh: simplify WARN usage in SH clock driver
sh: Check return value of clk_get on ms7724
sh: Check return value of clk_get on ecovec24
sh: move sh clock-cpg.c contents to drivers/sh/clk-cpg.c
sh: move sh clock.c contents to drivers/sh/clk.
sh: move sh asm/clock.h contents to linux/sh_clk.h V2
sh: remove unused clock lookup
sh: switch boards to clkdev
sh: switch sh4-202 to clkdev
sh: switch shx3 to clkdev
sh: switch sh7757 to clkdev
sh: switch sh7763 to clkdev
sh: switch sh7780 to clkdev
sh: switch sh7786 to clkdev
...
Linus Torvalds [Wed, 19 May 2010 18:35:30 +0000 (11:35 -0700)]
Merge branch 'for-linus' of git://git390.marist.edu/linux-2.6
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (24 commits)
[S390] drivers/s390/char: Use kmemdup
[S390] drivers/s390/char: Use kstrdup
[S390] debug: enable exception-trace debug facility
[S390] s390_hypfs: Add new attributes
[S390] qdio: remove API wrappers
[S390] qdio: set correct bit in dsci
[S390] qdio: dont convert timestamps to microseconds
[S390] qdio: remove memset hack
[S390] qdio: prevent starvation on PCI devices
[S390] qdio: count number of qdio interrupts
[S390] user space fault: report fault before calling do_exit
[S390] topology: expose core identifier
[S390] dasd: remove uid from devmap
[S390] dasd: add dynamic pav toleration
[S390] vdso: add missing vdso_install target
[S390] vdso: remove redundant check for CONFIG_64BIT
[S390] avoid default_llseek in s390 drivers
[S390] vmcp: disallow modular build
[S390] add breaking event address for user space
[S390] virtualization aware cpu measurement
...
Tejun Heo [Mon, 10 May 2010 19:41:42 +0000 (21:41 +0200)]
libata-sff: separate out BMDMA qc_issue
Separate out ata_bmdma_qc_issue() from ata_sff_qc_issue() such that
ata_sff_qc_issue() only deals with non-BMDMA SFF protocols (PIO and
nodata) while ata_bmdma_qc_issue() deals with the BMDMA protocols and
uses ata_sff_qc_issue() for non-DMA commands. All the users are
updated accordingly.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Tejun Heo [Mon, 10 May 2010 19:41:41 +0000 (21:41 +0200)]
libata-sff: prd is BMDMA specific
struct ata_prd and ap->prd are BMDMA specific. Add bmdma_ prefix to
them and move them inside CONFIG_ATA_SFF.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Tejun Heo [Mon, 10 May 2010 19:41:40 +0000 (21:41 +0200)]
libata-sff: ata_sff_[dumb_]qc_prep are BMDMA specific
Both qc_prep functions deal only with BMDMA PRD setup and PIO only SFF
drivers don't need them. Rename to ata_bmdma_[dumb_]qc_prep() and
relocate.
All usages are renamed except for pdc_adma and sata_qstor. Those two
drivers are not BMDMA drivers and don't need to call BMDMA qc_prep
functions. Calls to ata_sff_qc_prep() in the two drivers are removed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Tejun Heo [Mon, 10 May 2010 19:41:39 +0000 (21:41 +0200)]
libata-sff: separate out BMDMA EH
Some of error handling logic in ata_sff_error_handler() and all of
ata_sff_post_internal_cmd() are for BMDMA. Create
ata_bmdma_error_handler() and ata_bmdma_post_internal_cmd() and move
BMDMA part into those.
While at it, change DMA protocol check to ata_is_dma(), fix
post_internal_cmd to call ap->ops->bmdma_stop instead of directly
calling ata_bmdma_stop() and open code hardreset selection so that
ata_std_error_handler() doesn't have to know about sff hardreset.
As these two functions are BMDMA specific, there's no reason to check
for bmdma_addr before calling bmdma methods if the protocol of the
failed command is DMA. sata_mv and pata_mpc52xx now don't need to set
.post_internal_cmd to ATA_OP_NULL and pata_icside and sata_qstor don't
need to set it to their bmdma_stop routines.
ata_sff_post_internal_cmd() becomes noop and is removed.
This fixes p3 described in clean-up-BMDMA-initialization patch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Tejun Heo [Mon, 10 May 2010 19:41:38 +0000 (21:41 +0200)]
libata-sff: port_task is SFF specific
port_task is tightly bound to the standard SFF PIO HSM implementation.
Using it for any other purpose would be error-prone and there's no
such user and if some drivers need such feature, it would be much
better off using its own. Move it inside CONFIG_ATA_SFF and rename it
to sff_pio_task.
The only function which is exposed to the core layer is
ata_sff_flush_pio_task() which is renamed from ata_port_flush_task()
and now also takes care of resetting hsm_task_state to HSM_ST_IDLE,
which is possible as it's now specific to PIO HSM.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Tejun Heo [Mon, 10 May 2010 19:41:37 +0000 (21:41 +0200)]
libata-sff: ap->[last_]ctl are SFF specific
ap->[last_]ctl are specific to SFF controllers. Put them inside
CONFIG_ATA_SFF and move initialization into ata_sff_port_init().
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Tejun Heo [Mon, 10 May 2010 19:41:36 +0000 (21:41 +0200)]
libata-sff: rename ap->ops->drain_fifo() to sff_drain_fifo()
->drain_fifo() is SFF specific. Rename and relocate it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Tejun Heo [Mon, 10 May 2010 19:41:35 +0000 (21:41 +0200)]
libata-sff: introduce ata_sff_init/exit() and ata_sff_port_init()
In preparation of proper SFF/BMDMA separation, introduce
ata_sff_init/exit() and ata_sff_port_init(). These functions
currently don't do anything.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Tejun Heo [Mon, 10 May 2010 19:41:34 +0000 (21:41 +0200)]
libata-sff: clean up BMDMA initialization
When BMDMA initialization failed or BMDMA was not available for
whatever reason, bmdma_addr was left at zero and used as an indication
that BMDMA shouldn't be used. This leads to the following problems.
p1. For BMDMA drivers which don't use traditional BMDMA register,
ata_bmdma_mode_filter() incorrectly inhibits DMA modes. Those
drivers either have to inherit from ata_sff_port_ops or clear
->mode_filter explicitly.
p2. non-BMDMA drivers call into BMDMA PRD table allocation. It
doesn't actually allocate PRD table if bmdma_addr is not
initialized but is still confusing.
p3. For BMDMA drivers which don't use traditional BMDMA register, some
methods might not be invoked as expected (e.g. bmdma_stop from
ata_sff_post_internal_cmd()).
p4. SFF drivers w/ custom DMA interface implement noop BMDMA ops
worrying libata core might call into one of them.
These problems are caused by the muddy line between SFF and BMDMA and
the assumption that all BMDMA controllers initialize bmdma_addr.
This patch fixes p1 and p2 by removing the bmdma_addr assumption and
moving prd allocation to BMDMA port start. Later patches will fix the
remaining issues.
This patch improves BMDMA initialization such that
* When BMDMA register initialization fails, falls back to PIO instead
of failing. ata_pci_bmdma_init() never fails now.
* When ata_pci_bmdma_init() falls back to PIO, it clears
ap->mwdma_mask and udma_mask instead of depending on
ata_bmdma_mode_filter(). This makes ata_bmdma_mode_filter()
unnecessary thus resolving p1.
* ata_port_start() which actually is BMDMA specific is moved to
ata_bmdma_port_start(). ata_port_start() and ata_sff_port_start()
are killed.
* ata_sff_port_start32() is moved and renamed to
ata_bmdma_port_start32().
Drivers which no longer call into PRD table allocation are...
pdc_adma, sata_inic162x, sata_qstor, sata_sx4, pata_cmd640 and all
drivers which inherit from ata_sff_port_ops.
pata_icside sets ->port_start to ATA_OP_NULL as it doesn't need PRD
but is a BMDMA controller and doesn't have custom port_start like
other such controllers.
Note that with the previous patch which makes all and only BMDMA
drivers inherit from ata_bmdma_port_ops, this change doesn't break
drivers which need PRD table.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Tejun Heo [Mon, 10 May 2010 19:41:33 +0000 (21:41 +0200)]
libata-sff: clean up inheritance in several drivers
1. pata_cmd640 is PIO only. Inherit from sff.
2. pata_macio is BMDMA. Inherit from bmdma and drop explicit
bmdma_mode_filter() setting.
3. In sata_mv, unlike mv5, mv6 is BMDMA. Inherit from bmdma and
don't clear ->post_internal_cmd().
4. bf54x and icside are quasi-BMDMA controllers which don't use the
standard BMDMA registers so they don't initialize bmdma_addr and
inherit from sff to avoid the default mode_filter which disables
DMA modes if bmdma_addr is not initialized.
For 2 and 3, this patch makes the drivers explicitly specify
->mode_filter to ATA_OP_NULL while inheriting from ata_bmdma_port_ops.
These will be removed by the next patch.
This patch makes all and only BMDMA drivers inherit from
ata_bmdma_port_ops to ease further SFF/BMDMA separation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Mauro Carvalho Chehab [Tue, 18 May 2010 07:27:27 +0000 (04:27 -0300)]
V4L/DVB (13554a): v4l: Use the video_drvdata function in drivers
Fix all device drivers to use the video_drvdata function instead of
maintaining a local list of minor to private data mappings. Call
video_set_drvdata to register the driver private pointer when not
already done.
Where applicable, the local list of mappings is completely removed when
it becomes unused.
[mchehab.redhat.com: patch broke into two. This one changes just tm6000]
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Randy Dunlap [Fri, 7 May 2010 18:22:26 +0000 (15:22 -0300)]
V4L/DVB: vivi and mem2mem_testdev need slab.h to build
Fix vivi and mem2mem_testdev build errors: need to #include <linux/slab.h>:
drivers/media/video/vivi.c:1144: error: implicit declaration of function 'kfree'
drivers/media/video/vivi.c:1156: error: implicit declaration of function 'kzalloc'
drivers/media/video/vivi.c:1156: warning: assignment makes pointer from integer without a cast
drivers/media/video/mem2mem_testdev.c:862: error: implicit declaration of function 'kzalloc'
drivers/media/video/mem2mem_testdev.c:862: warning: assignment makes pointer from integer without a cast
drivers/media/video/mem2mem_testdev.c:874: error: implicit declaration of function 'kfree'
drivers/media/video/mem2mem_testdev.c:944: warning: assignment makes pointer from integer without a cast
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Stefan Ringel [Fri, 7 May 2010 15:29:04 +0000 (12:29 -0300)]
V4L/DVB: tm6000: bugfix image position
bugfix incorrect image and line position in videobuffer
Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jarod Wilson [Tue, 4 May 2010 19:17:05 +0000 (16:17 -0300)]
V4L/DVB: IR/imon: remove dead IMON_KEY_RELEASE_OFFSET
On Tue, May 04, 2010 at 06:06:41PM +0200, Dan Carpenter wrote:
> On Tue, May 04, 2010 at 10:03:18AM -0400, Jarod Wilson wrote:
> > @@ -1205,7 +1204,7 @@ static u32 imon_panel_key_lookup(u64 hw_code)
> > if (imon_panel_key_table[i].hw_code == (code | 0xffee))
> > break;
> >
> > - keycode = imon_panel_key_table[i % IMON_KEY_RELEASE_OFFSET].keycode;
> > + keycode = imon_panel_key_table[i].keycode;
> >
> > return keycode;
> > }
>
> There is still potentially a problem here because if we don't hit the
> break statement, then we're one past the end of the array.
D'oh. Okay, here's v2, should fix that buglet too.
This hack was used when the imon driver was using internal key lookup
routines, but became dead weight when the driver was converted to use
ir-core's key lookup routines. These bits simply didn't get removed,
drop 'em now.
Pointed out by Dan Carpenter.
v2: fix possible attempt to access beyond end of key table array,
also pointed out by Dan.
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Stefan Ringel [Thu, 6 May 2010 14:25:52 +0000 (11:25 -0300)]
V4L/DVB: tm6000: README - add vbi
Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 5 May 2010 15:30:01 +0000 (12:30 -0300)]
V4L/DVB: Fix unlock logic at medusa_video_init
As reported by Dan Carpenter:
> This was my patch: "cx25821: fix double unlock in medusa_video_init()"
>
> It accidentally got merged two times. The version from the staging tree
> is not correct. Please can you revert it:
>
7a02f549fcc30fe6be0c0024beae9a3db22e1af6 "Staging: cx25821: fix double
> unlock in medusa_video_init()"
After reviewing the logic at the function, instead of just adding a patch to
revert the wrong one, the better is to apply a different logic: add a goto
that will always unlock and return the error.
This simplifies the code a little bit, and, instead of just return -EINVAL,
it will return the error condition reported by the called functions.
This patch is folded with another patch from Dan that added one missing
goto.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
matthieu castet [Wed, 5 May 2010 18:59:20 +0000 (15:59 -0300)]
V4L/DVB: fix dvb frontend lockup
If my dvb device is removed while in use, I got the following oops:
[ 4920.484084] Call Trace:
[ 4920.484102] [<
c102daad>] ? default_wake_function+0x0/0x8
[ 4920.484147] [<
f8cb09e1>] ? dvb_unregister_frontend+0x95/0xcc [dvb_core]
[ 4920.484157] [<
c1044412>] ? autoremove_wake_function+0x0/0x2d
[ 4920.484168] [<
f8dd1af2>] ? dvb_usb_adapter_frontend_exit+0x12/0x21 [dvb_usb]
[ 4920.484176] [<
f8dd12f1>] ? dvb_usb_exit+0x26/0x88 [dvb_usb]
[ 4920.484184] [<
f8dd138d>] ? dvb_usb_device_exit+0x3a/0x4a [dvb_usb]
[ 4920.484217] [<
f7fe1b08>] ? usb_unbind_interface+0x3f/0xb4 [usbcore]
[ 4920.484227] [<
c11a4178>] ? __device_release_driver+0x74/0xb7
[ 4920.484233] [<
c11a4247>] ? device_release_driver+0x15/0x1e
[ 4920.484243] [<
c11a3a33>] ? bus_remove_device+0x6e/0x87
[ 4920.484249] [<
c11a26d6>] ? device_del+0xfa/0x152
[ 4920.484264] [<
f7fdf609>] ? usb_disable_device+0x59/0xb9 [usbcore]
[ 4920.484279] [<
f7fdb9ee>] ? usb_disconnect+0x70/0xdc [usbcore]
[ 4920.484294] [<
f7fdc728>] ? hub_thread+0x521/0xe1d [usbcore]
[ 4920.484301] [<
c1044412>] ? autoremove_wake_function+0x0/0x2d
[ 4920.484316] [<
f7fdc207>] ? hub_thread+0x0/0xe1d [usbcore]
[ 4920.484321] [<
c10441e0>] ? kthread+0x61/0x66
[ 4920.484327] [<
c104417f>] ? kthread+0x0/0x66
[ 4920.484336] [<
c1003d47>] ? kernel_thread_helper+0x7/0x10
If there are users (for example users == -2) :
- dvb_unregister_frontend :
- stop kernel thread with dvb_frontend_stop :
- fepriv->exit = 1;
- thread loop catch stop event and break while loop
- fepriv->thread = NULL; and fepriv->exit = 0;
- dvb_unregister_frontend wait on "fepriv->dvbdev->wait_queue" that fepriv->dvbdev->users==-1.
The user finish :
- dvb_frontend_release - set users to -1
- don't wait wait_queue because fepriv->exit != 1
=> dvb_unregister_frontend never exit the wait queue.
Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Dan Carpenter [Wed, 5 May 2010 06:00:47 +0000 (03:00 -0300)]
V4L/DVB: s2255drv: remove dead code
My concern initially was we dereference "dev" in the parameter list to
s2255_dev_err() but it turns out that code path is never used.
The s2255_stop_readpipe() is only called from one place and "dev" is
never null. So this patch just removes the whole condition here.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Cc: linux-dev@sensoray.com
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Dan Carpenter [Wed, 5 May 2010 06:01:30 +0000 (03:01 -0300)]
V4L/DVB: s2255drv: return if vdev not found
The original code didn't handle the case where vdev was not found so I
added a check for that.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Cc: linux-dev@sensoray.com
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Dan Carpenter [Wed, 5 May 2010 05:59:48 +0000 (02:59 -0300)]
V4L/DVB: ov511: cleanup: remove unneeded null check
We dereference "ov" unconditionally throughout the function so there is
no way it can be NULL here. This code has been around for ages so if
it were possible for "ov" to be NULL someone would have complained.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Dan Carpenter [Wed, 5 May 2010 05:58:57 +0000 (02:58 -0300)]
V4L/DVB: media/mem2mem: dereferencing free memory
We dereferenced "ctx" on the error path.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Peter Huewe [Wed, 5 May 2010 15:20:21 +0000 (12:20 -0300)]
V4L/DVB: media/IR: Add missing include file to rc-map.c
This patch adds a missing include linux/delay.h to prevent
build failures[1-5]
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Dan Carpenter [Wed, 5 May 2010 05:58:18 +0000 (02:58 -0300)]
V4L/DVB: dvb/stv6110x: cleanup error handling
The "stv6110x" is NULL so we can just return directly without calling
kfree(). Also I changed the printk() to make checkpatch.pl happy.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Devin Heitmueller [Sun, 21 Mar 2010 20:09:44 +0000 (17:09 -0300)]
V4L/DVB: ngene: Add lgdt3303 and mt2131 deps to Kconfig
Add the demod and tuner dependencies required for the Avermedia m780 to the
Kconfig for the ngene driver.
Thanks to Oliver Endriss for pointing this out.
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Devin Heitmueller [Sun, 14 Mar 2010 02:10:13 +0000 (23:10 -0300)]
V4L/DVB: ngene: start separating out DVB functions into separate file
Start moving the dvb specific code to ngene-dvb.c. Note that there is still
stuff in ngene-core.c which could potentially be moved out, but it will require
considerable reworking of the logic in order to continue to properly support
DVB while also being able to support transport streams coming from analog MPEG
encoders.
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Devin Heitmueller [Sat, 13 Mar 2010 20:53:58 +0000 (17:53 -0300)]
V4L/DVB: ngene: split out card specific code into a separate file
Split out the card profiles into a new file called ngene-cards.c. This is
part of a larger refactoring of the driver in preparation for adding analog
support.
Note that this patch makes *no* functional change - all I did was cut/paste the
code and add the function prototypes to ngene.h as needed.
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Devin Heitmueller [Sat, 13 Mar 2010 20:10:24 +0000 (17:10 -0300)]
V4L/DVB: ngene: split out i2c code into a separate file
Split out the i2c related code from the ngene-core.c into a new file called
ngene-i2c.c. This is part of a larger refactoring of the driver in preparation
for adding analog support.
Note that this patch makes *no* functional change - all I did was cut/paste the
code and add the function prototypes to ngene.h as needed.
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Devin Heitmueller [Sat, 13 Mar 2010 19:43:18 +0000 (16:43 -0300)]
V4L/DVB: ngene: add initial support for digital side of Avermedia m780
Add ATSC/QAM support for the Avermedia m780. Note that this patch does
not include any analog support for the board, as the ngene bridge driver does
not yet have analog implemented
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Devin Heitmueller [Sat, 13 Mar 2010 19:40:46 +0000 (16:40 -0300)]
V4L/DVB: ngene: properly support boards where channel 0 isn't a TS input
The current code assumes that channel zero is always a TS input, which would
result in an oops if the "one_adapter" modprobe option is 1 (which it is by
default) and the board in question has something else on channel zero (which
is the case for the Avermedia m780, which has it's analog input wired to UVI1)
The code now explicitly tracks the first adapter created and ensures that
other channels cannot accidentially be associated with a NULL adapter.
Also, eliminate what appears to be a typo where all of the channel parameters
are getting associated with stream zero's properties, which will work if you
happen to have a dual stream board with the exact same configuration, but if
they differ then the second stream is going to end up with the first stream's
configuration.
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 7 May 2010 11:48:41 +0000 (08:48 -0300)]
V4L-DVB: ngene: make sure that tuner headers are included
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Dan Carpenter [Tue, 4 May 2010 12:31:13 +0000 (09:31 -0300)]
V4L/DVB: media/az6027: handle -EIO failure
If the az6027_usb_in_op() returns a negative errno ret is -EIO and in
that case the value of b[0] may be undefined. The original code
assigned 0 to ret, but since it's already 0 now we can skip that.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Dan Carpenter [Tue, 4 May 2010 12:14:29 +0000 (09:14 -0300)]
V4L/DVB: media/az6027: doing dma on the stack
I changed the dma buffers to use allocated memory instead of stack
memory.
The reason for this is documented in Documentation/DMA-API-HOWTO.txt
under the section: "What memory is DMA'able?" That document was only
added a couple weeks ago and there are still lots of modules which
haven't been corrected yet. Btw. Smatch includes a pretty good test to
find places which use stack memory as a dma buffer. That's how I found
these. (http://smatch.sf.net).
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Dan Carpenter [Tue, 4 May 2010 11:36:34 +0000 (08:36 -0300)]
V4L/DVB: media/IR/imon: potential double unlock on error
If there is an error here we should unlock in the caller (which is
imon_init_intf1()). We can remove this stray unlock.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Dan Carpenter [Tue, 4 May 2010 11:38:26 +0000 (08:38 -0300)]
V4L/DVB: media/IR/imon: testing the wrong variable
There is a typo here. We meant to test "ir" instead of "props". The
"props" variable was tested earlier.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Dan Carpenter [Tue, 4 May 2010 11:37:33 +0000 (08:37 -0300)]
V4L/DVB: media/IR/imon: precendence issue: ! vs ==
The original condition is always false because ! has higher precedence
than == and neither 0 nor 1 is equal to IMON_DISPLAY_TYPE_VGA.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mats Randgaard [Wed, 5 May 2010 10:50:38 +0000 (07:50 -0300)]
V4L/DVB: tvp7002.c: fix some copy-paste errors in the comments
Signed-off-by: Mats Randgaard <mats.randgaard@tandberg.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mats Randgaard [Wed, 5 May 2010 08:21:24 +0000 (05:21 -0300)]
V4L/DVB: tvp7002.c: Add support for enum_dv_presets
Implement enum_dv_presets in tvp7002.
Signed-off-by: Mats Randgaard <mats.randgaard@tandberg.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mats Randgaard [Wed, 5 May 2010 08:08:22 +0000 (05:08 -0300)]
V4L/DVB: v4l2-subdev.h: Add support for enum_dv_preset
The op enum_dv_preset was missing in this header but is needed by subdev
drivers with DV functionality.
Signed-off-by: Mats Randgaard <mats.randgaard@tandberg.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Brian Johnson [Wed, 5 May 2010 16:22:45 +0000 (13:22 -0300)]
V4L/DVB: gspca - sn9c20x: Fix non working mt9v111 sensor
Signed-off-by: Brian Johnson <brijohn@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Brian Johnson [Mon, 19 Apr 2010 00:42:40 +0000 (21:42 -0300)]
V4L/DVB: gspca - sn9c20x: HAS_BUTTON flag -> HAS_NO_BUTTON flag
Reverse HAS_BUTTON logic since most webcams either have a button or if
they don't don't bother to send any interrupts. However I have at least
one model that appears to leave the button GPIO floating and can send
a bogus interrupt.
Signed-off-by: Brian Johnson <brijohn@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Brian Johnson [Sat, 10 Apr 2010 05:12:46 +0000 (02:12 -0300)]
V4L/DVB: gspca - sn9c20x: Add another MSI laptop to upsidedown device list
Signed-off-by: Brian Johnson <brijohn@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Brian Johnson [Mon, 5 Apr 2010 23:52:52 +0000 (20:52 -0300)]
V4L/DVB: gspca - sn9c20x: Add another laptop to upsidedown device list
Signed-off-by: Brian Johnson <brijohn@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 2 May 2010 14:11:40 +0000 (11:11 -0300)]
V4L/DVB: ivtv: fix VIDIOC_S_PRIORITY handling
VIDIOC_S_PRIORITY is also part of the ioctls that need to check the
access priority.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 2 May 2010 12:29:27 +0000 (09:29 -0300)]
V4L/DVB: usbvision: add delay before detecting the saa711x
The detection of the saa711x often failed. Adding a small delay before
attempting to detect it fixed this.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 2 May 2010 12:00:13 +0000 (09:00 -0300)]
V4L/DVB: usbvision: don't use usb_set_intfdata, let v4l2_device_register handle this
v4l2_device_register already sets intfdata, no need to do this again.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 2 May 2010 11:01:04 +0000 (08:01 -0300)]
V4L/DVB: hdpvr: fix disconnect sequence
Disconnecting the HDPVR caused a kernel oops if lockdep was enabled.
In addition, if an app still had video0 open and attempted to call ioctl
when the device was already disconnected the system would crash.
Move the freeing and cleanup code to the release function: that is the
right place for it since you know when you get there that nobody is
using the device.
Also removed usb_set_intfdata: v4l2_device_register sets this already
to v4l2_dev.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 2 May 2010 08:36:32 +0000 (05:36 -0300)]
V4L/DVB: radio-am800: let v4l2_device_(un)register handle usb_get/set_intfdata
v4l2_device_register already sets the usb intfdata to v4l2_dev. So use
that instead.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 2 May 2010 08:11:32 +0000 (05:11 -0300)]
V4L/DVB: v4l2-dev: remove unnecessary lock around atomic clear_bit
No need to lock when unregistering the device: clear_bit is already an
atomic operation.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sat, 1 May 2010 21:06:50 +0000 (18:06 -0300)]
V4L/DVB: em28xx: g_tuner must set type field
The 'type' field was undefined but should be set to ANALOG_TV.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sat, 1 May 2010 11:23:07 +0000 (08:23 -0300)]
V4L/DVB: tvp7002: fix query_dv_preset
If no signal or valid format is detected, then VIDIOC_QUERY_DV_PRESET must
return 0 and set the preset to V4L2_DV_INVALID.
This driver returned an error instead.
Also simplified the kernel messages a bit: change v4l2_err to v4l2_dbg (not
detecting a signal/valid format is not an error, so only print this info when
debug == 1) and do not call v4l_fill_dv_preset_info: it's overkill to do this
just for a debug message.
Thanks to Mats Randgaard for bringing this to my attention.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sat, 1 May 2010 11:03:24 +0000 (08:03 -0300)]
V4L/DVB: v4l2-common: simplify prio utility functions
v4l2_prio_init/open/close returned an int when in fact they would
always return 0. Make these void functions.
v4l2_prio_close and v4l2_prio_check pass an enum v4l2_priority as a
pointer for no good reason. Replace with a normal enum v4l2_priority
argument.
These changes will simplify the work of moving priority handling into
the v4l core.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sat, 1 May 2010 11:00:18 +0000 (08:00 -0300)]
V4L/DVB: bttv: remove bogus prio check in g_frequency
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sat, 1 May 2010 09:04:29 +0000 (06:04 -0300)]
V4L/DVB: Documentation: fix small error in the ENUMINPUT doc
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sat, 1 May 2010 19:07:04 +0000 (16:07 -0300)]
V4L/DVB: cx18/cx25840/saa7115/tvp5150: remove vbi support from s_fmt
Now that s_fmt is no longer used for VBI format setup in subdevs, remove
the VBI support from s_fmt.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 14 Mar 2010 15:39:27 +0000 (12:39 -0300)]
V4L/DVB: em28xx: switch to new vbi subdev ops
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 14 Mar 2010 15:31:08 +0000 (12:31 -0300)]
V4L/DVB: cx231xx: switch to new vbi subdev ops
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 14 Mar 2010 15:27:48 +0000 (12:27 -0300)]
V4L/DVB: pvrusb2: switch to new vbi subdev ops
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 14 Mar 2010 15:24:15 +0000 (12:24 -0300)]
V4L/DVB: cx18: switch to new vbi subdev ops
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 14 Mar 2010 15:18:18 +0000 (12:18 -0300)]
V4L/DVB: ivtv: switch to new vbi subdev ops
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 14 Mar 2010 13:59:16 +0000 (10:59 -0300)]
V4L/DVB: tvp5150: support new vbi ops to set/get VBI format
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 14 Mar 2010 13:54:47 +0000 (10:54 -0300)]
V4L/DVB: saa7127: support new vbi ops to set/get VBI format
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 14 Mar 2010 13:49:48 +0000 (10:49 -0300)]
V4L/DVB: cx18: support new vbi ops to set/get VBI format
Also removed the bogus zeroing of fmt.sliced when setting up raw VBI.
This should have been removed in ivtv, but it was just copied-and-pasted
into cx18.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 14 Mar 2010 13:16:46 +0000 (10:16 -0300)]
V4L/DVB: cx25840: support new vbi ops to set/get VBI format
Also removed the bogus zeroing of fmt.sliced when setting up raw VBI.
Switching between raw and sliced VBI changed in 2.6.28 and this memset
should have been removed at that time. It was never noticed because
the bridge driver will fill in the fmt.vbi values anyway.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 14 Mar 2010 13:10:14 +0000 (10:10 -0300)]
V4L/DVB: saa7115: support new vbi ops to set/get VBI format
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 14 Mar 2010 13:02:50 +0000 (10:02 -0300)]
V4L/DVB: v4l: add new subdev vbi ops to handle raw and sliced vbi
Currently raw and sliced vbi is setup using the video g/s_fmt ops.
However, we want to split off the vbi formatting into separate ops
so the first step is to create those new ops.
The next step will be to convert subdev drivers and bridge drivers
to use the new ops. And in the final step we can start converting
the video g/s_fmt ops to the new (and more appropriate) mediabus
format ops.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 14 Mar 2010 12:57:30 +0000 (09:57 -0300)]
V4L/DVB: v4l: move vbi-specific video ops to a new vbi ops struct
Only a relatively small number of video receivers and transmitters actually
support VBI. So start moving the vbi specific ops to an ops struct of their
own.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-François Moine [Thu, 29 Apr 2010 09:01:53 +0000 (06:01 -0300)]
V4L/DVB: gspca - main: Convert wMaxPacketSize from little endian 16 to cpu
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Laurent Pinchart [Fri, 30 Apr 2010 13:48:51 +0000 (10:48 -0300)]
V4L/DVB: MAINTAINERS: Update uvcvideo web site address
The web site has moved to a new location, update the MAINTAINERS file.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Laurent Pinchart [Sun, 25 Apr 2010 19:27:14 +0000 (16:27 -0300)]
V4L/DVB: uvcvideo: Prevent division by 0 when control step value is 0
The control step values reported by the device are used as a divisor
unchecked, which can result in a division by zero.
Check the step value and make it 1 when null.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Laurent Pinchart [Sun, 25 Apr 2010 19:23:24 +0000 (16:23 -0300)]
V4L/DVB: uvcvideo: Flag relative controls as write-only
The UVC relative controls (exposure time, iris, focus, zoom, pan/tilt)
are write-only (despite the UVC specification stating that the GET_CUR
request is mandatory). Mark the controls as such, and report the related
V4L2 controls V4L2_CTRL_FLAG_WRITE_ONLY.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Laurent Pinchart [Mon, 12 Apr 2010 13:41:22 +0000 (10:41 -0300)]
V4L/DVB: uvcvideo: Add support for V4L2_PIX_FMT_Y16
The Miricle 307K (17dc:0202) camera reports a 16-bit greyscale format,
support it in the driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Randy Dunlap [Wed, 5 May 2010 22:44:11 +0000 (19:44 -0300)]
V4L/DVB: [-next] media: fix vivi build error
vivi uses find_font(), which is only available when FONTS
is enabled, so make vivi depend on FONTS.
ERROR: "find_font" [drivers/media/video/vivi.ko] undefined!
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Dmitri Belimov [Tue, 6 Apr 2010 04:00:05 +0000 (01:00 -0300)]
V4L/DVB: saa7134: Add support new Behold TV cards
[dougsland@redhat.com: Fixed cards numbers reject due changes in saa7134.h]
Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This page took 0.048746 seconds and 5 git commands to generate.