Patrick McHardy [Mon, 9 Jan 2006 06:15:34 +0000 (22:15 -0800)]
[PKT_SCHED]: Convert tc action functions to single skb pointers
tcf_action_exec only gets a single skb pointer and doesn't own the skb,
but passes double skb pointers (to a local variable) to the action
functions. Change to use single skb pointers everywhere.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Mon, 9 Jan 2006 06:12:03 +0000 (22:12 -0800)]
[PKT_SCHED]: Use USEC_PER_SEC
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Mon, 9 Jan 2006 06:05:26 +0000 (22:05 -0800)]
[NET]: Convert net/{ipv4,ipv6,sched} to netdev_priv
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Sat, 7 Jan 2006 05:38:15 +0000 (16:38 +1100)]
[CRYPTO] cipher: Set alignmask for multi-byte loads
Many cipher implementations use 4-byte/8-byte loads/stores which require
alignment on some architectures. This patch explicitly sets the alignment
requirements for them.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Herbert Xu [Sat, 7 Jan 2006 05:24:15 +0000 (16:24 +1100)]
[CRYPTO] api: Require block size to be less than PAGE_SIZE/8
The cipher code path may allocate up to two blocks of data on the stack.
Therefore we need to place limits on the maximum block size.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Herbert Xu [Wed, 21 Dec 2005 11:01:58 +0000 (19:01 +0800)]
[CRYPTO] sha1: Fixed off-by-64 bug in sha1_update
After a partial update, the done pointer is off to the right by 64 bytes.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Daniel Marjamäki [Sat, 3 Dec 2005 06:16:42 +0000 (17:16 +1100)]
[CRYPTO] aes-i586: Remove unused variable ls_tab
It is assigned but never read.
Signed-off-by: Daniel Marjamäki <daniel.marjamaki@comhem.se>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Denis Vlasenko [Tue, 29 Nov 2005 11:23:20 +0000 (22:23 +1100)]
[CRYPTO] aes-i586: Nano-optimisation on key length check
Reduce the number of comparisons by one through the use of jb/je.
This patch also corrects the comments regarding the different key
lengths.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Herbert Xu [Tue, 29 Nov 2005 11:04:41 +0000 (22:04 +1100)]
[CRYPTO] cipher: Align temporary buffer in cbc_process_decrypt
Since the temporary buffer is used as an argument to cia_decrypt, it must be
aligned by cra_alignmask. This bug was found by linux@horizon.com.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Nicolas Pitre [Sun, 13 Nov 2005 00:17:33 +0000 (11:17 +1100)]
[CRYPTO] sha1: Avoid shifting count left and right
This patch avoids shifting the count left and right needlessly for each
call to sha1_update(). It instead can be done only once at the end in
sha1_final().
Keeping the previous test example (sha1_update() successively called with
len=64), a 1.3% performance increase can be observed on i386, or 0.2% on
ARM. The generated code is also smaller on ARM.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Nicolas Pitre [Sat, 12 Nov 2005 23:59:54 +0000 (10:59 +1100)]
[CRYPTO] sha1: Rename i/j to done/partial
This patch gives more descriptive names to the variables i and j.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Nicolas Pitre [Sat, 12 Nov 2005 23:47:20 +0000 (10:47 +1100)]
[CRYPTO] sha1: Avoid useless memcpy()
The current code unconditionally copy the first block for every call to
sha1_update(). This can be avoided if there is no pending partial block.
This is always the case on the first call to sha1_update() (if the length
is >= 64 of course.
Furthermore, temp does need to be called if sha_transform is never invoked.
Also consolidate the sha_transform calls into one to reduce code size.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Herbert Xu [Sat, 5 Nov 2005 07:06:26 +0000 (18:06 +1100)]
[CRYPTO] Allow AES C/ASM implementations to coexist
As the Crypto API now allows multiple implementations to be registered
for the same algorithm, we no longer have to play tricks with Kconfig
to select the right AES implementation.
This patch sets the driver name and priority for all the AES
implementations and removes the Kconfig conditions on the C implementation
for AES.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Herbert Xu [Sat, 5 Nov 2005 05:58:14 +0000 (16:58 +1100)]
[CRYPTO] Allow multiple implementations of the same algorithm
This is the first step on the road towards asynchronous support in
the Crypto API. It adds support for having multiple crypto_alg objects
for the same algorithm registered in the system.
For example, each device driver would register a crypto_alg object
for each algorithm that it supports. While at the same time the
user may load software implementations of those same algorithms.
Users of the Crypto API may then select a specific implementation
by name, or choose any implementation for a given algorithm with
the highest priority.
The priority field is a 32-bit signed integer. In future it will be
possible to modify it from user-space.
This also provides a solution to the problem of selecting amongst
various AES implementations, that is, aes vs. aes-i586 vs. aes-padlock.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Herbert Xu [Sun, 30 Oct 2005 10:25:15 +0000 (21:25 +1100)]
[CRYPTO] Use standard byte order macros wherever possible
A lot of crypto code needs to read/write a 32-bit/64-bit words in a
specific gender. Many of them open code them by reading/writing one
byte at a time. This patch converts all the applicable usages over
to use the standard byte order macros.
This is based on a previous patch by Denis Vlasenko.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Herbert Xu [Sun, 30 Oct 2005 09:44:37 +0000 (20:44 +1100)]
[PADLOCK] Fix sparse warning about 1-bit signed bit-field
Change the bit-field in struct cword to unsigned to shut sparse up.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
David S. Miller [Mon, 9 Jan 2006 21:59:12 +0000 (13:59 -0800)]
[SPARC64]: Add needed pm_power_off symbol.
Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Dooks [Mon, 9 Jan 2006 21:16:18 +0000 (21:16 +0000)]
[ARM] 3246/1: S3C24XX - retab clock list in arch/arm/mach-s3c2410/clock.c
Patch from Ben Dooks
Properly tabulate the clock table in arch/arm/mach-s3c2410/clock.c
and put the requisite commas on the end of the structs.
Fix the comment about clock enable and disable in the setup code
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Mon, 9 Jan 2006 21:12:17 +0000 (21:12 +0000)]
[MMC] Add DATA_MULTI flag
Some hosts need to know that a transfer will be multi-block.
Add a data flag to indicate multiple data block transfers.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Linus Torvalds [Mon, 9 Jan 2006 21:03:58 +0000 (13:03 -0800)]
Merge /pub/scm/linux/kernel/git/mchehab/v4l-dvb
Alexey Dobriyan [Mon, 9 Jan 2006 21:09:16 +0000 (00:09 +0300)]
[PATCH] Fix more "if ((err = foo() < 0))" typos
Another reason to use:
ret = foo();
if (ret < 0)
goto out;
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Hugh Dickins [Mon, 9 Jan 2006 20:46:49 +0000 (20:46 +0000)]
[PATCH] Fix sg_page_malloc() memset
sg_page_malloc should clear the data buffer, not that extent of mem_map.
This fixes Jesper's sg_page_free "Bad page states"
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Michael Krufky [Mon, 9 Jan 2006 20:21:40 +0000 (18:21 -0200)]
V4L/DVB (3336): Bluebird firmware hosting moved to common dvb firmware dir on linuxtv.org
- Get_dvb_firmware script updated accordingly:
- my $url = "http://www.linuxtv.org/~mkrufky/dvb-usb-bluebird-01.fw";
+ my $url = "http://www.linuxtv.org/download/dvb/firmware/dvb-usb-blue$
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Chris Pascoe [Mon, 9 Jan 2006 20:21:39 +0000 (18:21 -0200)]
V4L/DVB (3329): cx88_subids whitespace cleanup
- Clean up a recently introduced spaces vs tabs whitespace problem.
Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Michael Krufky [Mon, 9 Jan 2006 20:21:38 +0000 (18:21 -0200)]
V4L/DVB (3328): replace omitted 'TODO:'
- replace omitted 'TODO:'
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Patrick Boettcher [Mon, 9 Jan 2006 20:21:38 +0000 (18:21 -0200)]
V4L/DVB (3327): Remove DViCO specific firmware hacks from the generic code.
- Move the code that patches bluebird firmware before upload from the
generic code into the cxusb driver itself.
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Hans Verkuil [Mon, 9 Jan 2006 20:21:37 +0000 (18:21 -0200)]
V4L/DVB (3326): Fix stereo and standard reporting of msp3400 (esp. for radio)
- Add VIDIOC_LOG_STATUS to the radio device ioctl list.
- Reduce the confusion between modes and standards
- Fix stereo reporting for radio.
- Don't set i2c configuration if the chip doesn't support it.
- Fix reporting of current standard for radio.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Oliver Endriss [Mon, 9 Jan 2006 20:21:37 +0000 (18:21 -0200)]
V4L/DVB (3325): WSS output interface for av7110
- Implemented v4l2 api for sliced vbi data output
to pass WSS data from userspace to the av7110
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Hans Verkuil [Mon, 9 Jan 2006 20:21:36 +0000 (18:21 -0200)]
V4L/DVB (3324): msp3400 audio handling bug fixes.
- Check capabilities for audio settings (volume, balance,
bass, treble, loudness, mute)
- added loudness support
- added missing VIDEO_AUDIO_BALANCE flags for v4l1 compatibility
- do not call msp_any_detect_stereo for non-autoselect chips to
retrieve the current stereo setting: that will temporarily mute
the sound. It is only needed when the stereo mode might be
changed, and for autoselect msp processors that do not periodically
need to update their stereo setting.
- do not wake up the thread if the standard did not change. Prevents
temporary audio drop-out if the standard is set to the same value.
- fix confused stereo detect code where V4L2_TUNER_SUB_STEREO and
V4L2_TUNER_MODE_STEREO values were used incorrectly.
- stereo mode reporting was broken (v4l2 value used to index a
string array expecting v4l1 mode values).
- do not set dsp register 0x30 in the 3410d thread: that register
does not exist for pre-'G' revision msp chips.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Marc Koschewski [Mon, 9 Jan 2006 20:21:36 +0000 (18:21 -0200)]
V4L/DVB (3323): Add Kconfig option for wrongly programmed devices
- A new Kconfig option makes the user able to select if the dibusb-mb driver shall claim faulty programmed USB devices which are coming with default Cypress USB IDs.
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Marc Koschewski [Mon, 9 Jan 2006 20:21:35 +0000 (18:21 -0200)]
V4L/DVB (3322): Whitespace cleanup and unused code removed
- Some whitespaces cleaned up
- unused code removed
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Marc Koschewski [Mon, 9 Jan 2006 20:21:34 +0000 (18:21 -0200)]
V4L/DVB (3321): Indention cleanups
- Indention cleaned for tabsize=8
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Patrick Boettcher [Mon, 9 Jan 2006 20:21:33 +0000 (18:21 -0200)]
V4L/DVB (3320): Check if PLL-description is set
- Check if in the dvb-usb-device-structure the dvb_pll_desc is set before use.
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Marc Koschewski [Mon, 9 Jan 2006 20:21:33 +0000 (18:21 -0200)]
V4L/DVB (3319): Changed indention for define's and their values
- Indention for values of several request defines were not TabSized=8.
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
d binderman [Mon, 9 Jan 2006 20:21:32 +0000 (18:21 -0200)]
V4L/DVB (3318): Fixes warning: variable "ret" is used before its value is set
- Fixes compiling warning on kernel 2.6.15 with the Intel C compiler.
- It said drivers/media/dvb/frontends/bcm3510.c(258):
warning #592: variable "ret" is used before its value is set
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Hans Verkuil [Mon, 9 Jan 2006 20:21:32 +0000 (18:21 -0200)]
V4L/DVB (3317): msp3400: use v4l2_std_id and determine chip capabilities.
- Replace old norm by the v4l2_std_id values.
- Add code to correctly detect the various capabilities of the
various msp chips. It's not yet used, that's going to be the next step.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Chris Pascoe [Mon, 9 Jan 2006 20:21:31 +0000 (18:21 -0200)]
V4L/DVB (3315): Use correct AGC settings for DNTV Live! DVB-T Pro
- My original settings for this board were incorrect and resulted in
an increased number of signal dropouts. Replace this with the settings
from the Windows driver.
Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Michael Krufky [Mon, 9 Jan 2006 20:21:31 +0000 (18:21 -0200)]
V4L/DVB (3313): codingstyle cleanups & restore some wrongfully deleted dvb-usb-ids
- codingstyle cleanups & restore some wrongfully deleted dvb-usb-ids
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Chris Pascoe [Mon, 9 Jan 2006 20:21:29 +0000 (18:21 -0200)]
V4L/DVB (3312): DViCO USB IR Remote support
- Add support for the remote control receiver inside the DViCO FusionHDTV
DVB-T Dual Digital, and a keymap for the MCE remote bundled with it.
Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Chris Pascoe [Mon, 9 Jan 2006 20:21:28 +0000 (18:21 -0200)]
V4L/DVB (3311): DViCO FusionHDTV DVB-T Dual Digital PCI support
- Support for DVB reception on the PCI half of the DViCO DVB-T Dual Digital.
Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Chris Pascoe [Mon, 9 Jan 2006 20:21:28 +0000 (18:21 -0200)]
V4L/DVB (3310): DViCO Dual Digital DVB-T / USB bluebird updates
- Add support for the USB portion of the DViCO Dual Digital board.
Patch correct "warm" USB IDs into bluebird firmware before download.
Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Peter Missel [Mon, 9 Jan 2006 20:21:23 +0000 (18:21 -0200)]
V4L/DVB (3309): SAA7134: GPIO IRQ improvements
- Saa7134-core.c saa7134_irq(): Separate GPIO16 and GPIO18 handling. Call
IR-remote-GPIO handler only if the GPIO IRQ is "owned" by it. Added
infrastructure to branch out to a future I2C-IR IRQ handler.
saa7134-core.c saa7134_hwinit2(): Enable only the one GPIO pin and edge to
trigger an IRQ that is wired as keyup/keydown mask. IRQ will only be
generated for an actual key-down event.
saa7134-input.c flyvideo_codes[]: Replace numpad keys with normal ones. Put
meaning to mystery keys. Change some key definitions to have their functions
match their labels better. Fix typos.
saa7134-input.c flydvb_codes[]: Added new table for the larger remote that
comes with the LifeView FlyDVB series.
saa7134-input.c build_key(): In IRQ mode, signal key-down and then key-up
straight in one go.
Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Richard Knutsson [Wed, 30 Nov 2005 00:00:35 +0000 (01:00 +0100)]
[PATCH] drivers/*rest*: Replace pci_module_init() with pci_register_driver()
Replace obsolete pci_module_init() with pci_register_driver().
Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Tue, 6 Dec 2005 23:33:15 +0000 (15:33 -0800)]
[PATCH] drivers/sound/oss: Replace pci_module_init() with pci_register_driver()
Replace obsolete pci_module_init() with pci_register_driver().
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se>
Richard Knutsson [Tue, 29 Nov 2005 23:59:34 +0000 (00:59 +0100)]
[PATCH] drivers/block: Replace pci_module_init() with pci_register_driver()
Replace obsolete pci_module_init() with pci_register_driver().
Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Richard Knutsson [Tue, 29 Nov 2005 23:59:14 +0000 (00:59 +0100)]
[PATCH] arch: Replace pci_module_init() with pci_register_driver()
Replace obsolete pci_module_init() with pci_register_driver().
Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
linas@austin.ibm.com [Sat, 3 Dec 2005 01:16:18 +0000 (19:16 -0600)]
[PATCH] PCI Error Recovery: documentation
Various PCI bus errors can be signaled by newer PCI controllers.
Recovering from those errors requires an infrastructure to notify
affected device drivers of the error, and a way of walking through
a reset sequence. This patch adds documentation describing the
current error recovery proposal.
Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
linas [Wed, 16 Nov 2005 23:10:41 +0000 (17:10 -0600)]
[PATCH] PCI Error Recovery: header file patch
Various PCI bus errors can be signaled by newer PCI controllers.
Recovering from those errors requires an infrastructure to notify
affected device drivers of the error, and a way of walking through a
reset sequence. This patch adds a set of callbacks to be used by error
recovery routines to notify device drivers of the various stages of
recovery.
Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jesse Barnes [Sat, 17 Dec 2005 17:27:50 +0000 (09:27 -0800)]
[PATCH] PCI: update Toshiba ohci quirk DMI table
I upgraded my Toshiba Satellite BIOS recently to see if it would fix an
ACPI related problem I have
(http://bugzilla.kernel.org/show_bug.cgi?id=5727). Unfortunately, it
didn't, and moreover, Toshiba chose to change the system version in the
DMI table with the update, causing the OHCI1394 related quirk to break.
This patch updates the DMI table for the quirk to include Toshiba's new
version name for this machine; I've tested it and it seems to work fine.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Adrian Bunk [Thu, 22 Dec 2005 00:08:52 +0000 (01:08 +0100)]
[PATCH] PCI: drivers/pci: some cleanups
This patch contains the following cleanups:
- hotplug/pciehp_core.c: make the needlessly global hpdriver_context
static
- #if 0 the following unused functions:
- pci.c: pci_bus_max_busnr()
- pci.c: pci_max_busnr()
- proc.c: pci_proc_attach_bus()
- remove.c: pci_remove_device_safe
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kristen Accardi [Wed, 14 Dec 2005 17:37:26 +0000 (09:37 -0800)]
[PATCH] acpiphp: only size new bus
Only size the bus that has been added.
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Wed, 14 Dec 2005 17:37:26 +0000 (09:37 -0800)]
[PATCH] PCI Hotplug: fix up the sysfs file in the compaq pci hotplug driver
The Compaq PCI Hotplug driver was creating 2 sysfs files that contained
nothing but debug information, and had way more than "one value" in
them. This patch converts the code to use debugfs for these files
instead.
Compile tested only.
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jesper Juhl [Sun, 11 Dec 2005 05:41:42 +0000 (06:41 +0100)]
[PATCH] PCI: Reduce nr of ptr derefs in drivers/pci/hotplug/pciehp_core.c
Here's a small patch to reduce the nr. of pointer dereferences in
drivers/pci/hotplug/pciehp_core.c
Benefits:
- micro speed optimization due to fewer pointer derefs
- generated code is slightly smaller
- small line length cleanup
- better readability
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jesper Juhl [Sun, 11 Dec 2005 05:43:09 +0000 (06:43 +0100)]
[PATCH] PCI: Reduce nr of ptr derefs in drivers/pci/hotplug/pciehprm_acpi.c
Here's a small patch to reduce the nr. of pointer dereferences in
drivers/pci/hotplug/pciehprm_acpi.c
Benefits:
- micro speed optimization due to fewer pointer derefs
- generated code is slightly smaller
- better readability
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jesper Juhl [Sun, 11 Dec 2005 05:42:38 +0000 (06:42 +0100)]
[PATCH] PCI: Reduce nr of ptr derefs in drivers/pci/hotplug/rpaphp_pci.c
Here's a small patch to reduce the nr. of pointer dereferences in
drivers/pci/hotplug/rpaphp_pci.c
Benefits:
- micro speed optimization due to fewer pointer derefs
- generated code should be slightly smaller
- better readability
note: due to lack of both hardware and cross-compile tools this patch is,
unfortunately, completely untested.
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jesper Juhl [Sun, 11 Dec 2005 05:42:18 +0000 (06:42 +0100)]
[PATCH] PCI: Reduce nr of ptr derefs in drivers/pci/hotplug/cpqphp_core.c
Here's a small patch to reduce the nr of pointer dereferences in
drivers/pci/hotplug/cpqphp_core.c
Benefits of this patch:
- micro speed optimization due to fewer pointer derefs
- generated code is slightly smaller
- tiny line length and whitespace cleanup
- better readability
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jesse Barnes [Fri, 9 Dec 2005 19:55:03 +0000 (11:55 -0800)]
[PATCH] PCI: document sysfs rom file interface
idr gently pointed out today that not only is the sysfs rom file
interface somewhat unintuitive (despite my efforts and initial
implementation), but it's also undocumented! This patch to
Documentation/filesystems/sysfs-pci.txt corrects the latter problem; the
former is a userland ABI now though, so we're stuck with it for awhile
at least.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Benjamin Herrenschmidt [Tue, 13 Dec 2005 07:09:16 +0000 (18:09 +1100)]
[PATCH] PCI: Export pci_cfg_space_size
The powerpc PCI code sets up the PCI tree without doing config space
accesses in most cases, from the firmware tree. However, it still wants
to call pci_cfg_space_size() under some conditions, thus it needs to
be made non-static (though I don't see a point to export it to modules).
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Dominik Brodowski [Thu, 8 Dec 2005 15:53:12 +0000 (16:53 +0100)]
[PATCH] PCI: use bus numbers sparsely, if necessary
Add a warning if a child bus may be inaccessible because the
parent bridge has wrong secondary or subordinate bus numbers.
Note that this may or may not happen on "transparent" bridges,
as can be seen in bug #5557.
Also, if we do not fix up the assignment of bus numbers, try to
make use of the bus number space available.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Rajesh Shah [Thu, 8 Dec 2005 20:12:25 +0000 (12:12 -0800)]
[PATCH] pciehp: allow bridged card hotplug
This patch fixes bugs in the pciehp driver that prevent hot-add
of a card with PCI bridges on it.
Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Thomas Schaefer [Thu, 8 Dec 2005 19:55:57 +0000 (11:55 -0800)]
[PATCH] pciehp: handle sticky power-fault status
This patch disables power fault, MRL sensor and presence detection
interrupts when a PCIe slot is powered-off and enables those
interrupts when it is powered-on again. This is necessary to prevent
the associated events from causing an endless cycle of interrupts
due to the power-fault bit, which stays set till power is restored
to the slot.
Signed-off-by: Thomas Schaefer <thomas.schaefer@kontron.com>
Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Daniel Yeisley [Mon, 5 Dec 2005 12:06:43 +0000 (07:06 -0500)]
[PATCH] PCI Quirk: 1K I/O space granularity on Intel P64H2
I've implemented a quirk to take advantage of the 1KB I/O space
granularity option on the Intel P64H2 PCI Bridge. I had to change
probe.c because it sets the resource start and end to be aligned on 4k
boundaries (after the quirk sets them to 1k boundaries). I've tested
this patch on a Unisys ES7000-600 both with and without the 1KB option
enabled. I also tested this on a 2 processor Dell box that doesn't have
a P64H2 to make sure there were no negative affects there.
Signed-off-by: Dan Yeisley <dan.yeisley@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kenji Kaneshige [Mon, 5 Dec 2005 10:31:00 +0000 (19:31 +0900)]
[PATCH] shpchp: Implement get_address callback
The following patch implements .get_address callback of
hotplug_slot_ops for SHPCHP driver. With this patch, we
can see bus address of hotplug slots as follows:
$ cat address
0000:0b:01
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
linas@austin.ibm.com [Fri, 2 Dec 2005 00:59:58 +0000 (18:59 -0600)]
[PATCH] PCI Hotplug/powerpc: more removal of duplicated code
The RPAPHP code contains two routines that appear to be gratuitous copies
of very similar pci code. In particular,
rpaphp_claim_resource ~~ pci_claim_resource
(there is a minor, non-functional difference)
rpadlpar_claim_one_bus == pcibios_claim_one_bus
(the code is identical)
This patch removes the rpaphp versions of the code.
Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Acked-by: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
linas@austin.ibm.com [Fri, 2 Dec 2005 00:56:14 +0000 (18:56 -0600)]
[PATCH] PCI Hotplug/powerpc: remove duplicated code
The RPAPHP code contains a routine that duplicates some existing code.
This patch removes the rpaphp version of the code.
Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Acked-by: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Daniel Marjamäki [Thu, 1 Dec 2005 17:01:28 +0000 (18:01 +0100)]
[PATCH] PCI: irq.c: trivial printk and DBG updates
Updated printk and DBG with appropriate KERN_*.
Signed-off-by: Daniel Marjamäki <daniel.marjamaki@comhem.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kenji Kaneshige [Fri, 25 Nov 2005 03:28:53 +0000 (12:28 +0900)]
[PATCH] shpchp: fix improper wait for command completion
Current SHPCHP driver uses msleep_interruptible() function to wait for
a command completion event. But I think this would cause an unnecessary
long wait until timeout, if command completion interrupt came before
task state was changed to TASK_INTERRUPTIBLE. This patch fixes this
issue. With this patch, command completion becomes faster as follows:
o Without this patch
# time echo 1 > power
real 0m4.708s
user 0m0.000s
sys 0m0.524s
o With this patch
# time echo 1 > power
real 0m2.221s
user 0m0.000s
sys 0m0.532s
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kenji Kaneshige [Thu, 24 Nov 2005 02:39:29 +0000 (11:39 +0900)]
[PATCH] shpchp: fix improper write to Command Completion Detect bit
Current SHPCHP driver writes a '0' to the Command Completion Detect
bit to clear the Command Complete Interrupt Pending. But according to
the SHPC spec (See 4.7.3.1 System Interrupts), SHPCHP driver must
write '1'. This patch fixes this bug.
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kenji Kaneshige [Thu, 24 Nov 2005 02:36:59 +0000 (11:36 +0900)]
[PATCH] shpchp: fix improper mmio mapping
Current SHPCHP driver seems not to map MMIO region properly. This
patch fixes this bug. This patch also cleanup the code.
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kenji Kaneshige [Thu, 24 Nov 2005 02:35:05 +0000 (11:35 +0900)]
[PATCH] shpchp: fix improper reference to Mode 1 ECC Capability" bit
The hpc_get_mode1_ECC_cap() function of SHPCHP driver seems to refer
the wrong bit for refering the "Mode 1 ECC Capability" bit. This bug
seems not to cause any problem so far. But I think this should be
fixed. This patch fixes this bug.
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kenji Kaneshige [Thu, 24 Nov 2005 04:44:01 +0000 (13:44 +0900)]
[PATCH] shpchp: fix improper reference to Slot Avail Regsister
The hpc_get_max_bus_speed() function of the SHPCHP driver seems to
refer wrong bits in the "Slot Avail Register I" and "Slot Avail
Register II". This patch fixes this bug. And this also cleanup the
code.
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kenji Kaneshige [Fri, 25 Nov 2005 03:21:25 +0000 (12:21 +0900)]
[PATCH] shpchp: replace pci_find_slot() with pci_get_slot()
This patch replaces pci_find_slot() with pci_get_slot() in the SHPCHP
driver. This enables SHPCHP driver to work on multiple PCI segment
systems.
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Adrian Bunk [Sun, 20 Nov 2005 23:05:21 +0000 (00:05 +0100)]
[PATCH] PCI Hotplug: cpqphp_ctrl.c: remove dead code
The Coverity checker spotted that we already did return -ENOMEM
if (!p_mem_node).
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jordan, William P [Tue, 22 Nov 2005 06:51:57 +0000 (22:51 -0800)]
[PATCH] PCI Hotplug: ibmphp_pci.c copy-n-paste fix
I noticed what appears to be a cut/paste error in
drivers/pci/hotplug/ibmphp_pci.c:
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Sergey Vlasov [Mon, 14 Nov 2005 17:30:50 +0000 (20:30 +0300)]
[PATCH] PCIE: make bus_id for PCI Express devices unique
The bus_id string must be unique for all devices of that bus in the
system, not just for devices with the same parent - otherwise multiple
symlinks with identical names appear in /sys/bus/pci_express/devices.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Hanna Linder [Mon, 7 Nov 2005 07:39:36 +0000 (23:39 -0800)]
[PATCH] PCI: arch/i386/pci/acpi.c: use for_each_pci_dev
Signed-off-by: Hanna Linder <hannal@us.ibm.com>
Signed-off-by: Maximilian Attems <janitor@sternwelten.at>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jiri Slaby [Mon, 7 Nov 2005 07:39:33 +0000 (23:39 -0800)]
[PATCH] PCI: arch: pci_find_device remove (frv/mb93090-mb00/pci-irq.c)
Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jiri Slaby [Mon, 7 Nov 2005 07:39:35 +0000 (23:39 -0800)]
[PATCH] PCI: pci_find_device remove (sparc64/kernel/ebus.c)
Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jiri Slaby [Mon, 7 Nov 2005 07:39:33 +0000 (23:39 -0800)]
[PATCH] PCI: pci_find_device remove (frv/mb93090-mb00/pci-frv.c)
Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jiri Slaby [Mon, 7 Nov 2005 07:39:35 +0000 (23:39 -0800)]
[PATCH] PCI: pci_find_device remove (ppc/platforms/85xx/mpc85xx_cds_common.c)
Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jiri Slaby [Mon, 7 Nov 2005 07:39:34 +0000 (23:39 -0800)]
[PATCH] PCI: pci_find_device remove (ppc/kernel/pci.c)
Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
arch/ppc/kernel/pci.c | 21 +++++++++++----------
1 file changed, 11 insertions(+), 10 deletions(-)
Jiri Slaby [Mon, 7 Nov 2005 07:39:30 +0000 (23:39 -0800)]
[PATCH] PCI: pci_find_device remove (alpha/kernel/sys_alcor.c)
Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jiri Slaby [Mon, 7 Nov 2005 07:39:32 +0000 (23:39 -0800)]
[PATCH] PCI: pci_find_device remove (alpha/kernel/sys_sio.c)
Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kristen Accardi [Thu, 3 Nov 2005 00:55:49 +0000 (16:55 -0800)]
[PATCH] pci: call pci_read_irq for bridges
Call pci_read_irq() for bridges too, so that the pin value
is stored for bridges that require interrupts.
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kristen Accardi [Thu, 3 Nov 2005 00:24:39 +0000 (16:24 -0800)]
[PATCH] pci: use pin stored in pci_dev
Use the stored value of the interrupt pin rather than try to read
the config again.
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kristen Accardi [Thu, 3 Nov 2005 00:24:35 +0000 (16:24 -0800)]
[PATCH] apci: use pin stored in pci_dev
Use the stored value of the Interrupt Pin, rather than try to read
it again.
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kristen Accardi [Thu, 3 Nov 2005 00:24:32 +0000 (16:24 -0800)]
[PATCH] pci: store PCI_INTERRUPT_PIN in pci_dev
Store the value of the INTERRUPT_PIN in the pci_dev structure
so that it can be retrieved later.
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Deepak Saxena [Mon, 9 Jan 2006 19:23:11 +0000 (19:23 +0000)]
[ARM] 3070/2: Add __ioremap_pfn() API
Patch from Deepak Saxena
In working on adding 36-bit addressed supersection support to ioremap(),
I came to the conclusion that it would be far simpler to do so by just
splitting __ioremap() into a main external interface and adding an
__ioremap_pfn() function that takes a pfn + offset into the page that
__ioremap() can call. This way existing callers of __ioremap() won't have
to change their code and 36-bit systems will just call __ioremap_pfn()
and we will not have to deal with unsigned long long variables.
Note that __ioremap_pfn() should _NOT_ be called directly by drivers
but is reserved for use by arch_ioremap() implementations that map
32-bit resource regions into the real 36-bit address and then call
this new function.
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Mon, 9 Jan 2006 19:19:18 +0000 (19:19 +0000)]
[ARM] Only call set_type method in setup_irq if it's defined
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Mon, 9 Jan 2006 19:18:33 +0000 (19:18 +0000)]
Merge Linus' tree.
Linus Torvalds [Mon, 9 Jan 2006 18:03:44 +0000 (10:03 -0800)]
Merge git://git./linux/kernel/git/paulus/powerpc-merge
Knut Petersen [Mon, 9 Jan 2006 14:04:20 +0000 (15:04 +0100)]
[PATCH] Update cyblafb driver
This is a major update to the cyblafb framebuffer driver. Most
of the stuff has been tested in the mm tree.
Main advantages:
============
- vxres > xres support
- ywrap and xpan support
- much faster for almost all modes (e.g. 1280x1024-16bpp
draws more than 41 full screens of text instead of about 25
full screens of text per second on authors Epia 5000)
- module init/exit code fixed
- bugs triggered by console rotation fixed
- lots of minor improvements
- startup modes suitable for high performance scrolling
in all directions
This diff also contains a lot of white space fixes.
No side effects are possible, only one single graphics core is affected.
Signed-off-by: Knut Petersen <Knut_Petersen@t-online.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Mauro Carvalho Chehab [Mon, 9 Jan 2006 17:53:26 +0000 (15:53 -0200)]
V4L/DVB (3307): Some cleanups at I2C modules
- i2c names shorten
- removed obsoleted flags on newer modules
- small cleanups
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Linus Torvalds [Mon, 9 Jan 2006 17:39:55 +0000 (09:39 -0800)]
Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/libata-dev
Linus Torvalds [Mon, 9 Jan 2006 17:39:05 +0000 (09:39 -0800)]
Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/netdev-2.6
Kirill Korotaev [Mon, 9 Jan 2006 14:42:42 +0000 (17:42 +0300)]
[PATCH] netlink oops fix due to incorrect error code
Fixed oops after failed netlink socket creation.
Wrong parathenses in if() statement caused err to be 1,
instead of negative value.
Trivial fix, not trivial to find though.
Signed-Off-By: Dmitry Mishin <dim@sw.ru>
Signed-Off-By: Kirill Korotaev <dev@openvz.org>
Signed-Off-By: Linus Torvalds <torvalds@osdl.org>
Oleg Nesterov [Sun, 8 Jan 2006 19:19:16 +0000 (22:19 +0300)]
[PATCH] rcu: uninline __rcu_pending()
__rcu_pending() is rather fat and called twice from rcu_pending().
rcu_pending() has multiple callers, and not that small too.
This patch uninlines both of them.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Paul E. McKenney <paulmck@us.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Mauro Carvalho Chehab [Mon, 9 Jan 2006 17:32:46 +0000 (15:32 -0200)]
V4L/DVB (3305): Replaces old debug msgs to newer ones
- Replaces old debug msgs from bt832, tda743d and tda9875 to newer ones
as defined under v4l2-common.h.
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
George Gazurkoff [Mon, 9 Jan 2006 17:32:46 +0000 (15:32 -0200)]
V4L/DVB (3303): Both AverTV Studio 303 cards #6 and #36 use the same IR programming.
- Both AverTV Studio 303 cards, #6 and #36,
use the same remote control programming.
Signed-off-by: George Gazurkoff <gazurkoff@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Guy Martin [Mon, 9 Jan 2006 17:32:45 +0000 (15:32 -0200)]
V4L/DVB (3296): Fixes a bug at compat_ioctl32 kernel module
- There is a bug in the ioctl translations from 32bit userspace
to 64bit kernelspace in do_set_window().
- The video window (vw) should be passed to native_ioctl()
instead of the video clip.
Signed-off-by: Guy Martin <gmsoft@tuxicoman.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
This page took 0.049446 seconds and 5 git commands to generate.