Manish Goregaokar [Sat, 25 Jun 2016 05:40:38 +0000 (11:10 +0530)]
Add tests for printing of NonZero-optimized enums in Rust
gdb/testsuite/ChangeLog:
2016-06-25 Manish Goregaokar <manish@mozilla.com>
PR gdb/20239
* gdb.rust/simple.rs: Add more tests for printing NonZero enums.
* gdb.rust/simple.exp: Add test expectations for new NonZero tests.
Manish Goregaokar [Sat, 25 Jun 2016 05:39:23 +0000 (11:09 +0530)]
Make evaluation and type-printing of all NonZero optimized enums work
gdb/ChangeLog:
2016-06-25 Manish Goregaokar <manish@mozilla.com>
PR gdb/20239
* rust-lang.c (rust_get_disr_info): Correctly interpret
NonZero-optimized enums of arbitrary depth.
(rust_print_type): Correctly print NonZero-optimized
enums.
David Taylor [Tue, 12 Apr 2016 19:02:57 +0000 (15:02 -0400)]
Support structure offsets that are 512K or larger.
GDB computes structure byte offsets using a 32 bit integer. And,
first it computes the offset in bits and then converts to bytes. The
result is that any offset that if 512K bytes or larger overflows.
This patch changes GDB to use LONGEST for such calculations.
PR gdb/17520 Structure offset wrong when 1/4 GB or greater.
* c-lang.h: Change all parameters, variables, and struct or union
members used as struct or union fie3ld offsets from int to
LONGEST.
* c-valprint.c: Likewise.
* cp-abi.c: Likewise.
* cp-abi.h: Likewise.
* cp-valprint.c: Likewise.
* d-valprint.c: Likewise.
* dwarf2loc.c: Likewise.
* eval.c: Likewise.
* extension-priv.h: Likewise.
* extension.c: Likewise.
* extension.h: Likewise.
* findvar.c: Likewise.
* gdbtypes.h: Likewise.
* gnu-v2-abi.c: Likewise.
* gnu-v3-abi.c: Likewise.
* go-valprint.c: Likewise.
* guile/guile-internal.h: Likewise.
* guile/scm-pretty-print.c: Likewise.
* jv-valprint.c Likewise.
* opencl-lang.c: Likewise.
* p-lang.h: Likewise.
* python/py-prettyprint.c: Likewise.
* python/python-internal.h: Likewise.
* spu-tdep.c: Likewise.
* typeprint.c: Likewise.
* valarith.c: Likewise.
* valops.c: Likewise.
* valprint.c: Likewise.
* valprint.h: Likewise.
* value.c: Likewise.
* value.h: Likewise.
* p-valprint.c: Likewise.
* c-typeprint.c (c_type_print_base): When printing offset, use
plongest, not %d.
* gdbtypes.c (recursive_dump_type): Ditto.
GDB Administrator [Sat, 25 Jun 2016 00:00:19 +0000 (00:00 +0000)]
Automatic date update in version.in
Maciej W. Rozycki [Fri, 24 Jun 2016 23:49:10 +0000 (00:49 +0100)]
MIPS16/GAS: Restore unsupported relocation diagnostics
Correct a MIPS16 relocation handling regression in GAS introduced with:
commit
177b4a6ad0047c8995fbc55016bc4f4b68d53b4a
Author: Alexandre Oliva <aoliva@redhat.com>
Date: Mon Mar 18 18:56:18 2002 +0000
discussed at <https://sourceware.org/ml/binutils/2002-03/msg00345.html>,
which removed a preparatory call to `mips16_extended_frag' previously
made from `md_estimate_size_before_relax'. As a result the function is
never called with its `sec' parameter non-NULL and consequently all the
unsupported relocation checks within are dead and never trigger, causing
any unhandled relocations to silently resolve to 0. Unfortunately there
was no sufficient test suite coverage back then to catch this.
Remove all dead code then, and all the associated comments. Update the
remaining call to `mips16_extended_frag' from `mips_relax_frag' to pass
the relocation section as the `sec' parameter and use it to mark frags
which require an external relocation, as extended. Finally handle any
outstanding MIPS16 relocations in `md_convert_frag' and report an error
since we don't support any except with percent operators.
gas/
* config/tc-mips.c (append_insn): Use any `O_symbol' expression
unchanged with relaxed MIPS16 instructions.
(mips16_extended_frag): Adjust accordingly. Return 1 right
away if a relocation will be required for the symbol requested.
Remove dead first relaxation pass code.
(mips_relax_frag): Pass `sec' down to `mips16_extended_frag'.
(md_convert_frag): Adjust symbol value calculation. Raise an
error if a relocation is required for the symbol requested.
* testsuite/gas/mips/mips16@relax-swap3.d: Remove dump patterns,
add error output.
* testsuite/gas/mips/mips16@relax-swap3.l: New error output.
* testsuite/gas/mips/mips16-pcrel-relax-0.d: New test.
* testsuite/gas/mips/mips16-pcrel-relax-1.d: New test.
* testsuite/gas/mips/mips16-pcrel-relax-2.d: New test.
* testsuite/gas/mips/mips16-pcrel-relax-3.d: New test.
* testsuite/gas/mips/mips16-pcrel-reloc-0.d: New test.
* testsuite/gas/mips/mips16-pcrel-reloc-1.d: New test.
* testsuite/gas/mips/mips16-pcrel-reloc-2.d: New test.
* testsuite/gas/mips/mips16-pcrel-reloc-3.d: New test.
* testsuite/gas/mips/mips16-pcrel-reloc-4.d: New test.
* testsuite/gas/mips/mips16-pcrel-reloc-5.d: New test.
* testsuite/gas/mips/mips16-pcrel-reloc-6.d: New test.
* testsuite/gas/mips/mips16-pcrel-reloc-7.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-0.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-1.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-2.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-3.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute.d: New test.
* testsuite/gas/mips/mips16-branch-reloc-0.d: New test.
* testsuite/gas/mips/mips16-branch-reloc-1.d: New test.
* testsuite/gas/mips/mips16-branch-reloc-2.d: New test.
* testsuite/gas/mips/mips16-branch-reloc-3.d: New test.
* testsuite/gas/mips/mips16-branch-addend-0.d: New test.
* testsuite/gas/mips/mips16-branch-addend-1.d: New test.
* testsuite/gas/mips/mips16-branch-addend-2.d: New test.
* testsuite/gas/mips/mips16-branch-addend-3.d: New test.
* testsuite/gas/mips/mips16-branch-absolute.d: New test.
* testsuite/gas/mips/mips16-absolute-reloc-0.d: New test.
* testsuite/gas/mips/mips16-absolute-reloc-1.d: New test.
* testsuite/gas/mips/mips16-absolute-reloc-2.d: New test.
* testsuite/gas/mips/mips16-absolute-reloc-3.d: New test.
* testsuite/gas/mips/mips16-pcrel-reloc-2.l: New error output.
* testsuite/gas/mips/mips16-pcrel-reloc-3.l: New error output.
* testsuite/gas/mips/mips16-pcrel-reloc-6.l: New error output.
* testsuite/gas/mips/mips16-pcrel-reloc-7.l: New error output.
* testsuite/gas/mips/mips16-pcrel-addend-2.l: New error output.
* testsuite/gas/mips/mips16-pcrel-addend-3.l: New error output.
* testsuite/gas/mips/mips16-pcrel-absolute.l: New error output.
* testsuite/gas/mips/mips16-branch-reloc-2.l: New error output.
* testsuite/gas/mips/mips16-branch-reloc-3.l: New error output.
* testsuite/gas/mips/mips16-branch-addend-2.l: New error output.
* testsuite/gas/mips/mips16-branch-addend-3.l: New error output.
* testsuite/gas/mips/mips16-branch-absolute.l: New error output.
* testsuite/gas/mips/mips16-absolute-reloc-2.l: New error output.
* testsuite/gas/mips/mips16-absolute-reloc-3.l: New error output.
* testsuite/gas/mips/mips16-pcrel-relax-0.s: New test source.
* testsuite/gas/mips/mips16-pcrel-relax-2.s: New test source.
* testsuite/gas/mips/mips16-pcrel-reloc-0.s: New test source.
* testsuite/gas/mips/mips16-pcrel-reloc-1.s: New test source.
* testsuite/gas/mips/mips16-pcrel-reloc-2.s: New test source.
* testsuite/gas/mips/mips16-pcrel-reloc-3.s: New test source.
* testsuite/gas/mips/mips16-pcrel-reloc-4.s: New test source.
* testsuite/gas/mips/mips16-pcrel-reloc-5.s: New test source.
* testsuite/gas/mips/mips16-pcrel-reloc-6.s: New test source.
* testsuite/gas/mips/mips16-pcrel-reloc-7.s: New test source.
* testsuite/gas/mips/mips16-pcrel-addend-0.s: New test source.
* testsuite/gas/mips/mips16-pcrel-addend-1.s: New test source.
* testsuite/gas/mips/mips16-pcrel-addend-2.s: New test source.
* testsuite/gas/mips/mips16-pcrel-addend-3.s: New test source.
* testsuite/gas/mips/mips16-pcrel-absolute.s: New test source.
* testsuite/gas/mips/mips16-branch-reloc-0.s: New test source.
* testsuite/gas/mips/mips16-branch-reloc-1.s: New test source.
* testsuite/gas/mips/mips16-branch-reloc-2.s: New test source.
* testsuite/gas/mips/mips16-branch-reloc-3.s: New test source.
* testsuite/gas/mips/mips16-branch-addend-0.s: New test source.
* testsuite/gas/mips/mips16-branch-addend-1.s: New test source.
* testsuite/gas/mips/mips16-branch-addend-2.s: New test source.
* testsuite/gas/mips/mips16-branch-addend-3.s: New test source.
* testsuite/gas/mips/mips16-branch-absolute.s: New test source.
* testsuite/gas/mips/mips16-absolute-reloc-0.s: New test source.
* testsuite/gas/mips/mips16-absolute-reloc-1.s: New test source.
* testsuite/gas/mips/mips16-absolute-reloc-2.s: New test source.
* testsuite/gas/mips/mips16-absolute-reloc-3.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
David Taylor [Fri, 24 Jun 2016 21:05:31 +0000 (17:05 -0400)]
Add myself as a Write After Approval maintainer.
John Baldwin [Mon, 13 Jun 2016 04:24:42 +0000 (21:24 -0700)]
Add support for catching system calls to native FreeBSD targets.
All platforms on FreeBSD use a shared system call table, so use a
single XML file to describe the system calls available on each FreeBSD
platform.
Recent versions of FreeBSD include the identifier of the current
system call when reporting a system call entry or exit event in the
ptrace_lwpinfo structure obtained via PT_LWPINFO in fbsd_wait. As
such, FreeBSD native targets do not use the gdbarch method to fetch
the system call code. In addition, FreeBSD register sets fetched via
ptrace do not include an equivalent of 'orig_rax' (on amd64 for
example), so the system call code cannot be extracted from the
available registers during a system call exit. However, GDB assumes
that system call catch points are not supported if the gdbarch method
is not present. As a workaround, FreeBSD ABIs install a dummy gdbarch
method that throws an internal_error if it is ever invoked.
gdb/ChangeLog:
* configure.ac: Check for support for system call LWP fields on
FreeBSD.
* config.in, configure: Rebuild.
* data-directory/Makefile.in (SYSCALLS_FILES): Add freebsd.xml.
* fbsd-nat.c (fbsd_wait) [HAVE_STRUCT_PTRACE_LWPINFO_PL_SYSCALL_CODE]:
Report system call events.
[HAVE_STRUCT_PTRACE_LWPINFO_PL_SYSCALL_CODE]
(fbsd_set_syscall_catchpoint): New function.
(fbsd_nat_add_target) [HAVE_STRUCT_PTRACE_LWPINFO_PL_SYSCALL_CODE]:
Set "to_set_syscall_catchpoint" to "fbsd_set_syscall_catchpoint".
* fbsd-tdep.c: Include xml-syscall.h
(fbsd_get_syscall_number): New function.
(fbsd_init_abi): Set XML system call file name.
Add "get_syscall_number" gdbarch method.
* syscalls/freebsd.xml: New file.
John Baldwin [Thu, 16 Jun 2016 04:33:42 +0000 (21:33 -0700)]
Add a gdbarch 'print_auxv_entry' method for FreeBSD ABIs.
Add a 'print_auxv_entry' method for FreeBSD ABIs that parses
FreeBSD-specific auxiliary vector entries and outputs a suitable
description using fprint_auxv_entry.
gdb/ChangeLog:
* fbsd-tdep.c: Include "auxv.h".
(fbsd_print_auxv_entry): New function.
(fbsd_init_abi): Install gdbarch "print_auxv_entry" method.
John Baldwin [Sat, 11 Jun 2016 22:51:38 +0000 (15:51 -0700)]
Add a new gdbarch method to print a single AUXV entry.
Different platforms have different meanings for auxiliary vector
entries. The 'print_auxv_entry' gdbarch method allows an architecture
to output a suitable description for platform-specific entries.
A fprint_auxv_entry function is split out of fprint_target_auxv.
This function outputs the description of a single auxiliary vector
entry to the specified file using caller-supplied formatting and
strings to describe the vector type.
The existing switch on auxiliary vector types is moved out of
fprint_target_auxv into a new default_print_auxv_entry function.
default_print_auxv_entry chooses an appropriate format and description
and calls fprint_single_auxv to describe a single vector entry.
This function is used as the default 'print_auxv_entry' gdbarch method.
fprint_target_auxv now invokes the gdbarch 'print_auxv_entry' method
on each vector entry.
gdb/ChangeLog:
* auxv.c (fprint_auxv_entry): New function.
(default_print_auxv_entry): New function.
(fprint_target_auxv): Use gdbarch_print_auxv_entry.
* auxv.h (enum auxv_format): New enum.
(fprint_auxv_entry): Declare.
(default_print_auxv_entry): Declare.
* gdbarch.sh (print_auxv_entry): New.
* gdbarch.c, gdbarch.h: Re-generated.
John Baldwin [Sun, 12 Jun 2016 19:34:51 +0000 (12:34 -0700)]
Create a pseudo section for the ELF AUXV core dump note on FreeBSD.
The procstat AUXV core dump note in FreeBSD consists of 32-bit integer
followed by an array of auxiliary vector entries.
bfd/ChangeLog:
* elf.c (elfcore_grok_freebsd_note): Handle NT_FREEBSD_PROCSTAT_AUXV
notes.
John Baldwin [Sat, 11 Jun 2016 22:07:38 +0000 (15:07 -0700)]
Fetch the ELF auxiliary vector from live processes on FreeBSD.
Use the kern.proc.auxv.<pid> sysctl to fetch the ELF auxiliary vector for
a live process.
gdb/ChangeLog:
* fbsd-nat.c [KERN_PROC_AUXV] New variable super_xfer_partial.
(fbsd_xfer_partial): New function.
(fbsd_nat_add_target) [KERN_PROC_AUXV] Set "to_xfer_partial" to
"fbsd_xfer_partial".
John Baldwin [Sun, 12 Jun 2016 15:56:31 +0000 (08:56 -0700)]
Add elfcore_grok_freebsd_note to parse FreeBSD ELF core notes.
Move parsing of FreeBSD-specific ELF core notes out of elfcore_grok_note
into a new elfcore_grok_freebsd_note function. Add core note grok routines
for FreeBSD's psinfo and prstatus notes while here rather than depending
on the native handling in elfcore_grok_note.
bfd/ChangeLog:
* elf.c (elfcore_grok_note): Remove handling of NT_X86_XSTATE for
FreeBSD. Remove case for NT_FREEBSD_THRMISC.
(elfcore_grok_freebsd_psinfo): New function.
(elfcore_grok_freebsd_prstatus): New function.
(elfcore_grok_freebsd_note): New function.
(elf_parse_notes): Use "elfcore_grok_freebsd_note" for "FreeBSD"
notes.
John Baldwin [Thu, 16 Jun 2016 05:44:11 +0000 (22:44 -0700)]
Add constants for FreeBSD-specific auxiliary vector entry types.
include/ChangeLog:
* elf/common.h (AT_FREEBSD_EXECPATH, AT_FREEBSD_CANARY)
(AT_FREEBSD_CANARYLEN, AT_FREEBSD_OSRELDATE, AT_FREEBSD_NCPUS)
(AT_FREEBSD_PAGESIZES, AT_FREEBSD_PAGESIZESLEN)
(AT_FREEBSD_TIMEKEEP, AT_FREEBSD_STACKPROT): Define.
Joel Brobecker [Fri, 24 Jun 2016 17:04:56 +0000 (13:04 -0400)]
Add missing ChangeLog entry for "fix undefined reference [...]" commit.
Joel Brobecker [Fri, 24 Jun 2016 16:16:24 +0000 (12:16 -0400)]
fix undefined reference to bfd_link_plugin_object_p during link
When configured with the default options, GDB currently fails to link,
due to an undefined reference to bfd_link_plugin_object_p, coming from
elflink.c:
#ifdef BFD_SUPPORTS_PLUGINS
|| (abfd->plugin_format == bfd_plugin_unknown
&& bfd_link_plugin_object_p (abfd))
#endif
This is because BFD_SUPPORTS_PLUGINS is always defined. It is its value
that determines whether plugin support is enabled or not.
bfd/ChangeLog:
* elflink.c: Check the value of BFD_SUPPORTS_PLUGINS rather
than its existance.
Alan Modra [Thu, 23 Jun 2016 12:41:57 +0000 (22:11 +0930)]
MIPS objcopy --rename-section fix
Some MIPS targets use a named section symbol rather than a symbol with
no name as is used with most ELF targets. When renaming sections, the
named section symbol needs to be renamed too.
Rather than fix this bug, I'd originally intended to just correct the
xfail added recently for update-1.o vs update4.o in update-section.exp,
using the same set of targets for the localize-hidden-1 mips xfail.
I'd extracted that target test into a new function, is_bad_symtab. It
turns out to be useful in readelf.exp too.
bfd/
* config.bfd: Delete mips vxworks patterns matched earlier.
Combine mips*-*-none with mips*-*-elf*.
binutils/
* objcopy.c (find_section_rename): Forward declare. Remove
ibfd and sec_ptr param. Add old_name param. Allow for NULL
returned_flags. Move read of section name and flags to..
(setup_section): ..here. Update find_section_rename call.
(filter_symbols): Rename section symbols for renamed sections.
(copy_object): Call filter_symbols when renamed sections.
* testsuite/lib/binutils-common.exp (is_bad_symtab): New.
* testsuite/binutils-all/update-section.exp: Revert
96037eb0
mips xfail.
* testsuite/binutils-all/objcopy.exp (copy_executable): Use
is_bad_symtab.
(localize-hidden-1): xfail if is_bad_symtab.
* testsuite/binutils-all/readelf.exp: Use is_bad_symtab to select
between mips/tmips.
Alan Modra [Fri, 24 Jun 2016 01:50:53 +0000 (11:20 +0930)]
aarch64 ld testsuite
Fixes failure on aarch64-rtems.
* testsuite/ld-aarch64/aarch64-elf.exp (aarch64_choose_ilp32_emul):
Don't error out, always return an emulation.
Alan Modra [Fri, 24 Jun 2016 01:24:50 +0000 (10:54 +0930)]
alpha-openbsd build failure
This target doesn't build, due to a missing gas/config/te-obsd.h file.
It's been that way since the commit switching to elf, in 2002.
https://lists.gnu.org/archive/html/bug-gnu-utils/2002-07/msg00128.html
* configure.tgt (alpha-*-openbsd*): Use em=nbsd.
Alan Modra [Fri, 24 Jun 2016 01:20:25 +0000 (10:50 +0930)]
Limit objdump -S context lines
Showing context lines is confusing in many cases, an obvious example
being loops.
* objdump.c (struct print_file_list): Add "max_printed".
(try_print_file_open): Init new field.
(show_line): Don't show 5 context lines when redisplaying source.
H.J. Lu [Fri, 24 Jun 2016 12:21:43 +0000 (05:21 -0700)]
Check DEFAULT_LD_Z_RELRO for -z relro help message
* lexsup.c (elf_shlib_list_options): Check DEFAULT_LD_Z_RELRO
for -z relro help message.
Tom Tromey [Thu, 26 May 2016 21:04:07 +0000 (15:04 -0600)]
Move logic out of symbol_find_demangled_name
This patch moves most of the demangling logic out of
symbol_find_demangled_name into the various language_defn objects.
The simplest way to do this seemed to be to add a new method to
language_defn. This is shame given the existing la_demangle, but
given Ada's unusual needs, and the differing demangling options
between languages, la_demangle didn't seem to fit.
In order to make this work, I made enum language order-sensitive.
This helps preserve the current ordering of demangling operations.
2016-06-23 Tom Tromey <tom@tromey.com>
* symtab.c (symbol_find_demangled_name): Loop over languages and
use language_sniff_from_mangled_name.
* rust-lang.c (rust_sniff_from_mangled_name): New function.
(rust_language_defn): Update.
* p-lang.c (pascal_language_defn): Update.
* opencl-lang.c (opencl_language_defn): Update.
* objc-lang.c (objc_sniff_from_mangled_name): New function.
(objc_language_defn): Update.
* m2-lang.c (m2_language_defn): Update.
* language.h (struct language_defn) <la_sniff_from_mangled_name>: New
field.
(language_sniff_from_mangled_name): Declare.
* language.c (language_sniff_from_mangled_name): New function.
(unknown_language_defn, auto_language_defn, local_language_defn):
Update.
* jv-lang.c (java_sniff_from_mangled_name): New function.
(java_language_defn): Use it.
* go-lang.c (go_sniff_from_mangled_name): New function.
(go_language_defn): Use it.
* f-lang.c (f_language_defn): Update.
* defs.h (enum language): Reorder.
* d-lang.c (d_sniff_from_mangled_name): New function.
(d_language_defn): Use it.
* cp-support.h (gdb_sniff_from_mangled_name): Declare.
* cp-support.c (gdb_sniff_from_mangled_name): New function.
* c-lang.c (c_language_defn, cplus_language_defn)
(asm_language_defn, minimal_language_defn): Update.
* ada-lang.c (ada_sniff_from_mangled_name): New function.
(ada_language_defn): Use it.
Tom Tromey [Thu, 26 May 2016 16:33:28 +0000 (10:33 -0600)]
Move filename extensions into language_defn
This moves filename extensions from a function in symfile.c out to
each language_defn. I think this is an improvement because it means
less digging around when writing a new language port.
2016-06-23 Tom Tromey <tom@tromey.com>
* ada-lang.c (ada_extensions): New array.
(ada_language_defn): Use it.
* c-lang.c (c_extensions): New array.
(c_language_defn): Use it.
(cplus_extensions): New array.
(cplus_language_defn): Use it.
(asm_extensions): New array.
(asm_language_defn): Use it.
(minimal_language_defn): Update.
* d-lang.c (d_extensions): New array.
(d_language_defn): Use it.
* f-lang.c (f_extensions): New array.
(f_language_defn): Use it.
* go-lang.c (go_language_defn): Update.
* jv-lang.c (java_extensions): New array.
(java_language_defn): Use it.
* language.c (add_language): Call add_filename_language.
(unknown_language_defn, auto_language_defn, local_language_defn):
Update.
* language.h (struct language_defn) <la_filename_extensions>: New
field.
* m2-lang.c (m2_language_defn): Update.
* objc-lang.c (objc_extensions): New array.
(objc_language_defn): Use it.
* opencl-lang.c (opencl_language_defn): Update.
* p-lang.c (p_extensions): New array.
(pascal_language_defn): Use it.
* rust-lang.c (rust_extensions): New array.
(rust_language_defn): Use it.
* symfile.c (add_filename_language): No longer static. Make "ext"
const.
(init_filename_language_table): Remove.
(_initialize_symfile): Update.
* symfile.h (add_filename_language): Declare.
Tom Tromey [Thu, 26 May 2016 16:22:03 +0000 (10:22 -0600)]
Use VEC for filename_language_table
This patch changes filename_language_table to be a VEC. This seemed
like a reasonable cleanup over the old code.
2016-06-23 Tom Tromey <tom@tromey.com>
* symfile.c (filename_language_table): Now a VEC.
(fl_table_size, fl_table_next): Remove.
(add_filename_language): Use VEC_safe_push.
(set_ext_lang_command, info_ext_lang_command)
(deduce_language_from_filename): Use VEC_iterate.
(init_filename_language_table): Use VEC_empty.
Tom Tromey [Thu, 9 Jun 2016 21:07:55 +0000 (15:07 -0600)]
Make gdbpy_parameter static
While working on the next patch in this series, I noticed that
gdbpy_parameter did not need to be exported. This makes it "static".
2016-06-23 Tom Tromey <tom@tromey.com>
* python/python.c (gdbpy_parameter): Now static.
* python/python-internal.h (gdbpy_parameter): Don't declare.
GDB Administrator [Fri, 24 Jun 2016 00:00:15 +0000 (00:00 +0000)]
Automatic date update in version.in
Cary Coutant [Thu, 23 Jun 2016 16:45:25 +0000 (09:45 -0700)]
Fix bug with grouping sections.
The fix for PR 15370 did not correctly check all patterns in a group,
but instead threw all unassigned sections into the group. This patch
fixes that.
2016-06-23 Cary Coutant <ccoutant@gmail.com>
Igor Kudrin <ikudrin@accesssoftek.com>
gold/
PR gold/15370
* script-sections.cc
(Output_section_element_input::set_section_addresses): Keep bin_count
separate from input_pattern_count.
* testsuite/script_test_12.t: Add another section .x4.
* testsuite/script_test_12i.t: Likewise.
* testsuite/script_test_12a.c: Likewise.
* testsuite/script_test_12b.c: Likewise.
Igor Kudrin [Thu, 23 Jun 2016 15:50:18 +0000 (08:50 -0700)]
Fix compilation error in MSYS2 environment.
gold/
* gold-threads.cc (impl_threads::Lock_impl_threads): Fix typos.
Tom Tromey [Mon, 20 Jun 2016 16:28:37 +0000 (10:28 -0600)]
PR gdb/16483 - simplify "info frame-filters" output
PR gdb/16483 notes that the output of "info frame-filters" is quite
voluminous. In particular it prints an entry for each objfile, even if
only to say that the objfile does not have any associated frame filters.
I think it's better to only print output when there is a frame filter.
There's nothing worth doing with the no-frame-filter information, and
limiting the output makes it much more readable.
Built and regtested on x86-64 Fedora 23.
2016-06-23 Tom Tromey <tom@tromey.com>
PR gdb/16483:
* python/lib/gdb/command/frame_filters.py
(InfoFrameFilter.list_frame_filters): Rename to print_list. Print
nothing if no filters found. Return value indicating whether
filters were printed.
(InfoFrameFilter.print_list): Remove.
(InfoFrameFilter.invoke): Print message if no frame filters
found.
2016-06-23 Tom Tromey <tom@tromey.com>
PR gdb/16483:
* gdb.python/py-framefilter.exp: Add "info frame-filter" test
before any filters are loaded.
Maciej W. Rozycki [Thu, 23 Jun 2016 10:33:52 +0000 (11:33 +0100)]
MIPS/GAS: Keep the original microMIPS symbol reference in branch relocs
Keep original microMIPS symbols in references from branch relocations so
that the ISA bit is retained and can be verified for validity in static
link. No need to update WRT MIPS16 symbols because we keep them all
anyway for other reasons.
gas/
* config/tc-mips.c (b_reloc_p): New function.
(mips_fix_adjustable): Also keep the original microMIPS symbol
referred from branch relocations.
* testsuite/gas/mips/branch-local-1.d: New test.
* testsuite/gas/mips/branch-local-n32-1.d: New test.
* testsuite/gas/mips/branch-local-n64-1.d: New test.
* testsuite/gas/mips/micromips@branch-misc-4-64.d: Update
relocations.
* testsuite/gas/mips/branch-local-1.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new cases.
Graham Markall [Tue, 21 Jun 2016 19:25:29 +0000 (20:25 +0100)]
[ARC] Misc minor edits/fixes
The code supporting -mspfp, -mdpfp, and -mfpuda options are in
sections of code that are commented as being for backward
compatibility only, and having no effect. However, they do have an
effect, enabling the SPX, DPX, and DPA instruction subclasses
respectively. This commit moves the code supporting these options
away from the comments indicating that they are dummy options, and
also fixes a small issue where -mnps400 had the additional effect
of enabling SPX instructions.
A couple of other minor edits (that make no functional change) are
also included.
gas/ChangeLog:
* config/tc-arc.c (options, md_longopts, md_parse_option):
Move -mspfp, -mdpfp and -mfpuda out of the sections for
dummy options. Correct erroneous enabling of SPFP
instructions when using -mnps400.
include/ChangeLog:
* opcode/arc.h: Make insn_class_t alphabetical again.
opcodes/ChangeLog:
* arc-opc.c: Correct description of availability of NPS400
features.
GDB Administrator [Thu, 23 Jun 2016 00:00:23 +0000 (00:00 +0000)]
Automatic date update in version.in
Maciej W. Rozycki [Wed, 22 Jun 2016 23:41:34 +0000 (00:41 +0100)]
MIPS/LD/testsuite: Use wildcard address matching in `undefweak-overflow'
So that test case updates result in legible dump pattern changes.
ld/
* testsuite/ld-mips-elf/undefweak-overflow.d: Use wildcard
address matching.
Maciej W. Rozycki [Wed, 22 Jun 2016 23:29:14 +0000 (00:29 +0100)]
MIPS/LD/testsuite: Uniquely identify `undefweak-overflow' tests
ld/
* testsuite/ld-mips-elf/mips-elf.exp: Uniquely identify
`undefweak-overflow' tests.
Maciej W. Rozycki [Tue, 21 Jun 2016 20:22:39 +0000 (21:22 +0100)]
MIPS/GAS: Handle resolved R6 PC-relative relocations (ChangeLog)
Add missing ChangeLog entry for commit
41947d9e38c4 ("MIPS/GAS: Handle
resolved R6 PC-relative relocations").
Peter Bergner [Wed, 22 Jun 2016 22:55:17 +0000 (17:55 -0500)]
Add support for yet some more new ISA 3.0 instructions.
opcodes/
* ppc-opc.c (RM, DRM, VXASH, VXASH_MASK, XMMF, XMMF_MASK): New defines.
(powerpc_opcodes) <brd, brh, brw, mffsce, mffscdrn, mffscdrni,
mffscrn, mffscrni, mffsl, nandxor, rldixor, setbool,
xor3>: New mnemonics.
<setb>: Change to a VX form instruction.
(insert_sh6): Add support for rldixor.
(extract_sh6): Likewise.
gas/
* testsuite/gas/ppc/power9.d <brd, brh, brw, mffs, mffs., mffsce,
mffscdrn, mffscdrni, mffscrn, mffscrni, mffsl, nandxor, rldixor,
setbool, xor3>: New tests.
* testsuite/gas/ppc/power9.s: Likewise.
Trevor Saunders [Sat, 4 Jun 2016 03:11:46 +0000 (23:11 -0400)]
addmore extern C
opcodes/ChangeLog:
2016-06-22 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* arc-ext.h: Wrap in extern C.
include/ChangeLog:
2016-06-22 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* elf/dlx.h: Wrap in extern C.
* elf/xtensa.h: Likewise.
* opcode/arc.h: Likewise.
Nick Clifton [Wed, 22 Jun 2016 13:42:26 +0000 (14:42 +0100)]
Fix various binutils testsuite failures.
* testsuite/binutils-all/ar.exp: Skip tests for Alpha target.
Skip bfdtest1 tests for tic30 target.
* testsuite/binutils-all/arm/objdump.exp: Skip for aout arm
target.
* testsuite/binutils-all/compress.exp: Expect some tests to fail
on the nds32.
* testsuite/binutils-all/copy-3.d: Skip for go32 targets.
* testsuite/binutils-all/copy-4.d: Skip for AIX and linuxecoff
targets.
* testsuite/binutils-all/nm.exp: Treat beos based targets as ELF
targets.
* testsuite/binutils-all/objcopy.exp: Only run reverse bytes tests
if the bintest.o file was created. Use the
get_standard_section_names proc to get the name of the data
section.
* testsuite/binutils-all/objdump.exp: Update regexps to allow for
RX section names.
* testsuite/binutils-all/readelf.exp: Use
get_standard_section_names proc to get the name of the data
section.
* testsuite/binutils-all/readelf.r: Allow for non standard text
section names.
* testsuite/binutils-all/readelf.s: Update regexps for tilepro.
* testsuite/binutils-all/size.exp: Allow for non standard section
names.
* testsuite/binutils-all/update-section.exp: Expect comapre 1vs4
to fail on mips targets.
* testsuite/lib/utils-lib.exp (default_binutils_run): Use
get_standard_section_names proc.
(run_dump_test): Likewise.
(proc get_standard_section_names): New proc.
H.J. Lu [Wed, 22 Jun 2016 12:39:22 +0000 (05:39 -0700)]
gold: Add a linker configure option --enable-relro
Add a configure option --enable-relro to decide whether -z relro should
be enabled by default. Default to yes.
PR ld/20283
* NEWS: Mention --enable-relro.
* configure.ac: Add --enable-relro.
(DEFAULT_LD_Z_RELRO): New. Set by --enable-relro and default
to 1.
* config.in: Regenerated.
* configure: Likewise.
* options.h (General_options::relro): Default to
DEFAULT_LD_Z_RELRO.
H.J. Lu [Wed, 22 Jun 2016 12:37:24 +0000 (05:37 -0700)]
ld: Add a linker configure option --enable-relro
Add a configure option --enable-relro to decide whether -z relro should
be enabled in ELF linker by default. Default to yes for all Linux
targets, except FRV, HPPA, IA64 and MIPS, since many relro tests fail
on these targets.
PR ld/20283
* NEWS: Mention --enable-relro.
* configure.ac: Add --enable-relro.
(DEFAULT_LD_Z_RELRO): New. Set by --enable-relro.
* configure.tgt (ac_default_ld_z_relro): Default it to 1 for
some Linux targets.
* config.in: Regenerated.
* configure: Likewise.
* emultempl/elf32.em (gld${EMULATION_NAME}_before_parse): Set
link_info.relro to DEFAULT_LD_Z_RELRO.
* testsuite/config/default.exp (ld_elf_shared_opt): New.
* testsuite/lib/ld-lib.exp (run_dump_test): Pass
$ld_elf_shared_opt to ld for ELF targets with shared object
support.
(run_ld_link_tests): Likewise.
Trevor Saunders [Sat, 28 May 2016 15:54:51 +0000 (11:54 -0400)]
tilegx: move TILEGX_NUM_PIPELINE_ENCODINGS to tilegx_pipeline enum
Its closely related to what the encodings are, more than a set of random
constants, so it seems to make sense to put it here.
include/ChangeLog:
2016-06-22 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* opcode/tilegx.h: Move TILEGX_NUM_PIPELINE_ENCODINGS into
tilegx_pipeline.
Trevor Saunders [Sat, 4 Jun 2016 20:45:13 +0000 (16:45 -0400)]
xtensa: include elf/xtensa.h in tc-xtensa.c
There's no reason to define these macros twice.
gas/ChangeLog:
2016-06-22 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-xtensa.c: Include elf/xtensa.h.
Nick Clifton [Wed, 22 Jun 2016 08:55:50 +0000 (09:55 +0100)]
Increase size of string buffer used to hold printed versions of timestamps.
binutils* readelf.c (dynamic_section_mips_val): Increase size of timebuf.
(process_mips_specific): Likewise.
(process_gnu_liblist): Likewise.
GDB Administrator [Wed, 22 Jun 2016 00:00:09 +0000 (00:00 +0000)]
Automatic date update in version.in
Maciej W. Rozycki [Tue, 21 Jun 2016 20:22:39 +0000 (21:22 +0100)]
MIPS/GAS: Handle resolved R6 PC-relative relocations
Complement commit
7361da2c952e ("Add support for MIPS R6.") and fix
internal errors like:
foo.s: Assembler messages:
foo.s: Internal error!
Assertion failure in md_apply_fix at .../gas/config/tc-mips.c:15028.
Please report this bug.
triggered by resolved R6 PC-relative relocations in sources containing
R6 code fragments wrapped into ISA override blocks embedded within code
otherwise assembled for an older ISA.
gas/
* config/tc-mips.c (calculate_reloc) <BFD_RELOC_HI16_S_PCREL>
<BFD_RELOC_LO16_PCREL>: New switch cases.
(md_apply_fix) <BFD_RELOC_HI16_S_PCREL, BFD_RELOC_LO16_PCREL>:
Move switch cases along `BFD_RELOC_MIPS_JMP'.
<BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2>
<BFD_RELOC_MIPS_18_PCREL_S3, BFD_RELOC_MIPS_19_PCREL_S2>: Handle
the resolved case.
* testsuite/gas/mips/pcrel-reloc-4.d: New test.
* testsuite/gas/mips/pcrel-reloc-4-r6.d: New test.
* testsuite/gas/mips/pcrel-reloc-5.d: New test.
* testsuite/gas/mips/pcrel-reloc-5-r6.d: New test.
* testsuite/gas/mips/pcrel-reloc-6.d: New test.
* testsuite/gas/mips/pcrel-reloc-6.l: New list test.
* testsuite/gas/mips/pcrel-reloc-4.s: New test source.
* testsuite/gas/mips/pcrel-reloc-6.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
Maciej W. Rozycki [Tue, 21 Jun 2016 19:12:00 +0000 (20:12 +0100)]
MIPS/GAS: Fix null pointer dereferences in R6 PC-relative relocation checks
Avoid segmentation faults in alignment checks made in `md_apply_fix' for
BFD_RELOC_MIPS_18_PCREL_S3 and BFD_RELOC_MIPS_19_PCREL_S2 relocations
caused by dereferencing `fixP->fx_addsy' which will be null if the
relocation processed has been fully resolved.
gas/
* config/tc-mips.c (md_apply_fix) <BFD_RELOC_MIPS_18_PCREL_S3>
<BFD_RELOC_MIPS_19_PCREL_S2>: Avoid null pointer dereferences
via `fixP->fx_addsy'.
Maciej W. Rozycki [Tue, 21 Jun 2016 17:54:16 +0000 (18:54 +0100)]
MIPS/GAS: Correct BFD_RELOC_MIPS_18_PCREL_S3 calculation
The PC-relative R_MIPS_PC18_S3 relocation and consequently its BFD
internal BFD_RELOC_MIPS_18_PCREL_S3 representation is calculated from
the address of the aligned doubleword containing the location being
relocated: (sign_extend(A) + S - (P & ~0x7)) >> 3 rather than the
address of the location itself. Reflect this in calculations made by
GAS so that the relocated field is set correctly if resolved by GAS,
such as with local symbols in the same section which do not require
relocations to be propagated to the link stage.
gas/
* config/tc-mips.c (md_pcrel_from) <BFD_RELOC_MIPS_18_PCREL_S3>:
Calculate relocation from the containing aligned doubleword.
(tc_gen_reloc) <BFD_RELOC_MIPS_18_PCREL_S3>: Calculate the
addend from the containing aligned doubleword.
Maciej W. Rozycki [Tue, 21 Jun 2016 15:01:27 +0000 (16:01 +0100)]
MIPS/GAS: Use the module level ISA setting for R6 relaxation
Use the module level ISA setting rather than the last ISA selected with
a `.set' directive in the source file in determination as to whether to
keep PC-relative relocations and then with the original symbol referred,
for the purpose of R6 linker relaxation.
This is so that with e.g. code like this:
b foo
.set mips32r2
...
it's the command line options or any `.module' directive that decides
how to encode any relocation for `foo' rather than the presence of `.set
mips32r2'.
gas/
* config/tc-mips.c (mips_force_relocation): Use `file_mips_opts'
rather than `mips_opts' for the R6 ISA check.
(mips_fix_adjustable): Likewise.
* testsuite/gas/mips/pcrel-reloc-1.d: New test.
* testsuite/gas/mips/pcrel-reloc-1-r6.d: New test.
* testsuite/gas/mips/pcrel-reloc-2.d: New test.
* testsuite/gas/mips/pcrel-reloc-2-r6.d: New test.
* testsuite/gas/mips/pcrel-reloc-3.d: New test.
* testsuite/gas/mips/pcrel-reloc-3-r6.d: New test.
* testsuite/gas/mips/pcrel-reloc-1.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
Maciej W. Rozycki [Tue, 21 Jun 2016 13:06:27 +0000 (14:06 +0100)]
MIPS/BFD: Don't stop processing on a cross-mode jump conversion error
As with commit
ed53407eec9e ("MIPS/BFD: Don't stop processing on
`bfd_reloc_outofrange'") don't bail out right away and instead continue
processing on a cross-mode jump conversion error, so that any further
issues are also reported. Adjust message formatting accordingly, using
`%X' to abort processing at conclusion. Remove the full stop from the
end of the message, for consistency across error reporting.
Adjust the corresponding test case accordingly and make it trigger the
error twice.
bfd/
* elfxx-mips.c (mips_elf_perform_relocation): Call
`info->callbacks->einfo' rather than `*_bfd_error_handler' and
use the `%X%H' format for the cross-mode jump conversion error
message. Remove the full stop from the end of the message.
Continue processing rather than returning failure.
ld/
* testsuite/ld-mips-elf/mode-change-error-1a.s: Trigger an error
twice rather than once.
* testsuite/ld-mips-elf/mode-change-error-1.d: Adjust
accordingly. Remove the full stop from the end of the message.
Walfred Tedeschi [Tue, 21 Jun 2016 13:15:04 +0000 (15:15 +0200)]
Improve user experience in printing Fortran derived types.
Output for Fortran derived classes is like:
"( 9, 'abc')"
with this changes the output is changed to:
"( lucky_number = 9, letters = 'abc')"
2016-06-21 Walfred Tedeschi <walfred.tedeschi@intel.com>
* f-valprint.c (f_val_print): Add field names for printing
derived types fields.
gdb/testsuite:
* gdb.fortran/derived-type.exp (print q): Add fields to the output.
* gdb.fortran/vla-type.exp (print twov): Fix vla tests with
structs.
* gdb.fortran/derived-type-function.exp: New file.
* gdb.fortran/derived-type-function.f90: New file.
Graham Markall [Tue, 21 Jun 2016 13:03:08 +0000 (14:03 +0100)]
Arc assembler: Convert nps400 from a machine type to an extension.
gas * config/tc-arc.c (check_cpu_feature, md_parse_option):
Add nps400 option and feature. Add check for nps400
feature. Refactor existing checks to check subclass before
feature enablement.
(md_show_usage): Document flags for NPS-400 and add some other
undocumented flags.
(cpu_type): Remove nps400 CPU type entry
(check_zol): Remove bfd_mach_arc_nps400 case.
(md_show_usage): Add help on -mcpu=nps400.
(cpu_types): Add entry for nps400 as arc700 plus nps400 extension
set.
* doc/c-arc.texi: Document the -mnps400, -mspfp, -mdpfp, and
-fpuda flags. Document -mcpu=nps400.
* testsuite/gas/arc/nps-400-0.d: Use -mcpu=arc700 -mnps400. Change
expected flags to match ARC700 instead of NPS400.
* testsuite/gas/arc/nps-400-1.d: Use -mcpu=arc700 -mnps400.
* testsuite/gas/arc/nps-400-2.d: Likewise.
* testsuite/gas/arc/nps-400-3.d: Likewise.
* testsuite/gas/arc/nps-400-4.d: Likewise.
* testsuite/gas/arc/nps-400-5.d: Likewise.
* testsuite/gas/arc/nps-400-6.d: Likewise.
* testsuite/gas/arc/nps-400-7.d: Likewise.
* testsuite/gas/arc/textinsn2op01.s: Change opcode of myinsn to
avoid clash with cbba instruction.
* testsuite/gas/arc/textinsn2op01.d: Likewise.
* testsuite/gas/arc/textinsn3op.d: Likewise.
* testsuite/gas/arc/textinsn3op.s: Likewise.
* testsuite/gas/arc/nps-400-0.d: Test using NPS-400 using
-mcpu=nps400 as an alternative to -mcpu=arc700 -mnps400 flags.
binutils* readelf.c (decode_ARC_machine_flags): Remove E_ARC_MACH_NPS400
case.
ld * testsuite/ld-arc/nps-1a.d: Use -mcpu=arc700 -mnps400.
* testsuite/ld-arc/nps-1b.d: Likewise.
include * opcode/arc.h: Add nps400 extension and instruction
subclass.
Remove ARC_OPCODE_NPS400
* elf/arc.h: Remove E_ARC_MACH_NPS400
opcodes * arc-dis.c (arc_insn_length): Add comment on instruction length.
Use same method for determining instruction length on ARC700 and
NPS-400.
(arc_insn_length, print_insn_arc): Remove bfd_mach_arc_nps400.
* arc-nps400-tbl.h: Make all nps400 instructions ARC700 instructions
with the NPS400 subclass.
* arc-opc.c: Likewise.
bfd * archures.c: Remove bfd_mach_arc_nps400.
* bfd-in2.h: Likewise.
* cpu-arc.c (arch_info_struct): Likewise.
* elf32-arc.c (arc_elf_object_p, arc_elf_final_write_processing):
Likewise.
Andreas Arnez [Tue, 21 Jun 2016 11:26:11 +0000 (13:26 +0200)]
S390 gdbserver: Mark local funcs/vars as static
Compiling with '-Wmissing-declarations' yields warnings in
linux-s390-low.c. To fix this, mark appropriate functions as static.
gdb/gdbserver/ChangeLog:
* linux-s390-low.c (s390_emit_eq_goto): Mark function static.
(s390_emit_ne_goto): Likewise.
(s390_emit_lt_goto): Likewise.
(s390_emit_le_goto): Likewise.
(s390_emit_gt_goto): Likewise.
(s390_emit_ge_goto): Likewise.
(s390x_emit_eq_goto): Likewise.
(s390x_emit_ne_goto): Likewise.
(s390x_emit_lt_goto): Likewise.
(s390x_emit_le_goto): Likewise.
(s390x_emit_gt_goto): Likewise.
(s390x_emit_ge_goto): Likewise.
(s390_emit_ops_impl): Mark variable static.
(s390x_emit_ops): Likewise.
Andreas Arnez [Tue, 21 Jun 2016 11:26:11 +0000 (13:26 +0200)]
S390: Fix typo "s930" -> "s390"
This fixes a typo in the name of the "last-break" regset.
gdb/ChangeLog:
* s390-linux-tdep.c (s390_iterate_over_regset_sections): Fix typo
in name of last-break regset.
Cary Coutant [Tue, 21 Jun 2016 03:13:08 +0000 (20:13 -0700)]
Update gold to version 1.12.
gold/
* NEWS: Add new features in 1.12.
* version.cc (version_string): Bump to 1.12.
Pedro Alves [Tue, 21 Jun 2016 00:11:57 +0000 (01:11 +0100)]
Add "new-ui console" tests
This adds a test that uses new-ui to create a secondary console, and
then runs some basic smoke tests. It ensures that:
- synchronous commands send output to the UI that initiated it
- asynchronous events like breakpoint hits are reported on all
consoles.
- "new-ui" without arguments doesn't crash.
- The "new-ui" command doesn't repeat.
gdb/testsuite/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* gdb.base/new-ui.exp: New file.
* lib/mi-support.exp (switch_gdb_spawn_id): Move to ...
* lib/gdb.exp (switch_gdb_spawn_id): ... here.
(with_spawn_id): New procedure.
Pedro Alves [Tue, 21 Jun 2016 00:11:57 +0000 (01:11 +0100)]
Always switch fork child to the main UI
The following scenario:
- gdb started in normal CLI mode.
- separate MI channel created with new-ui
- inferior output redirected with the "set inferior-tty" command.
- use -exec-run in the MI channel to run the inferior
is presently mishandled.
When we create the inferior, in fork-child.c, right after vfork, we'll
close all the file descriptors in the vfork child, and then dup the
tty to file descriptors 0/1/2, create a session, etc. Note that when
we close all descriptors, we close the file descriptors behind
gdb_stdin/gdb_stdout/gdb_stderr of all secondary UIs... So if
anything goes wrong in the child and it calls warning/error, it'll end
up writting to the current UI's stdout/stderr streams, which are
backed by file descriptors that have since been closed. Because this
happens in a vfork region, the corresponding stdin/stdout/stderr in
the parent/gdb end up corrupted.
The fix is to switch to the main UI right after the vfork, so that
gdb_stdin/gdb_stdout/gdb_stderr are correctly mapped to
stdin/stdout/stderr (and thus to file descriptors 0/1/2), so this code
works as it has always worked.
(Technically, we're doing a lot of stuff we shouldn't be doing after a
vfork, while we should only be calling async-signal-safe functions.)
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* fork-child.c (fork_inferior): Switch the child to the main UI
right after vfork. Save/restore the current UI in the parent.
Flush outputs of the main UI instead of the current UI.
gdb/testsuite/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* gdb.mi/mi-exec-run.exp: New file.
Pedro Alves [Tue, 21 Jun 2016 00:11:56 +0000 (01:11 +0100)]
Make mi-break.exp always expect breakpoint commands output on the main UI
mi-break.exp regresses when tested with MI running on a secondary UI,
with RUNTESTFLAGS="FORCE_SEPARATE_MI_TTY=1".
The problem is simply that the test sets a breakpoint, and attaches
"print" commands to the breakpoint. Since breakpoint commands always
run with the main UI as current UI, the breakpoint command's output
goes to the main UI. So we need to tweak the test to expect it there.
gdb/testsuite/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* gdb.mi/mi-break.exp (test_breakpoint_commands): Always expect
breakpoint command's output on the main UI.
(test_break): New procedure, factored out from calls in the top
level.
(top level): Use foreach_with_prefix to test MI as main UI and as
separate UI.
Pedro Alves [Tue, 21 Jun 2016 00:11:56 +0000 (01:11 +0100)]
Send deleted watchpoint-scope output to all UIs
Testing with:
make check RUNTESTFLAGS="SEPARATE_MI_TTY=1"
shows this, in gdb.mi/mi-watch.exp:
-*stopped,reason="watchpoint-scope",wpnum="2",frame={addr="0x00000000004005cb",
+*stopped,frame={addr="0x00000000004005cb",
(...)
-PASS: gdb.mi/mi-watch.exp: hw: watchpoint trigger
+FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (unknown output after running)
That is, we lose the "watchpoint-scope" output on the MI UI.
This commit fixes it, and makes the test run with MI running as both
main UI and separate UI.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* breakpoint.c (watchpoint_check): Send watchpoint-deleted output
to all UIs.
gdb/testsuite/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* gdb.mi/mi-watch.exp (test_watchpoint_creation_and_listing)
(test_awatch_creation_and_listing)
(test_rwatch_creation_and_listing, test_watchpoint_triggering):
Remove 'type' parameter.
(test_watchpoint_all): New parameter mi_mode. Remove
with_test_prefix.
(top level): Use foreach_with_prefix, and add main/separate UI MI
testing axis.
Pedro Alves [Tue, 21 Jun 2016 00:11:55 +0000 (01:11 +0100)]
Add testing infrastruture bits for running with MI on a separate UI
With this, a specific test may can start GDB with MI on a separate UI
by using:
mi_gdb_start separate-mi-tty
In addition, it's also possible to run the whole testsuite with MI on
a separate tty, with:
make check RUNTESTFLAGS="FORCE_SEPARATE_MI_TTY=1"
gdb_main_spawn_id and mi_spawn_id are added so that tests may expect
output from either channel.
While at it, inferior_spawn_id was not being cleared when gdb exits,
unlike the other spawn ids, thus a test that starts gdb more than once
would end up using a stale spawn id.
gdb/testsuite/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* README (Testsuite Parameters): Document FORCE_SEPARATE_MI_TTY.
* lib/gdb.exp (default_gdb_exit): Clear inferior_spawn_id.
* lib/mi-support.exp (mi_uncatched_gdb_exit): Unset
gdb_main_spawn_id, mi_spawn_id, unset inferior_spawn_id.
(gdb_main_spawn_id, mi_spawn_id): Declare and
comment.
(mi_create_inferior_pty): New procedure,
factored out from default_mi_gdb_start.
(switch_gdb_spawn_id, mi_gdb_start_separate_mi_tty): New
procedures.
(default_mi_gdb_start): Call mi_gdb_start_separate_mi_tty if the
separate-mi-tty option is specified, or SEPARATE_MI_TTY is set.
Use mi_create_inferior_pty.
(mi_gdb_start): Use eval to pass down args list.
Pedro Alves [Tue, 21 Jun 2016 00:11:55 +0000 (01:11 +0100)]
[DOC] Document support for running interpreters on separate UIs
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* NEWS: Mention support for running interpreters on separate
UIs and the new new-ui command.
gdb/doc/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Interpreters): Update intepreter-exec section,
document new-ui and explain use case.
Pedro Alves [Tue, 21 Jun 2016 00:11:55 +0000 (01:11 +0100)]
Add new command to create extra console/mi UIs
With all the previous plumbing in place, it's now easy to add a
command that actually creates a new console/mi UI.
The intended use case is to make it possible and easy for MI frontends
to provide a fully featured GDB console to users, with readline
support, command line editing, history, etc., just like if gdb was
started on the command line. Currently MI frontends have to try to
implement all of that theirselves and make use of "-interpreter-exec
console ...", which is far from perfect. If you ever tried Eclipse's
gdb console window, you'll know what I mean...
Instead of trying to multiplex console through MI, this command let's
just leverage all the built in readline/editing support already inside
gdb.
The plan is for the MI frontend to start GDB in regular console mode,
running inside a terminal emulator widget embedded in Eclipse (which
already exists, for supporting the shell widget; other frontends have
similar widgets), and then tell GDB to run a full MI interpreter on an
specified input/output device, independent of the console.
My original prototype planned to do things the other way around --
start GDB in MI mode, and then start an extra CLI console on separate
tty. I handed over that prototype to Marc Khouzam @ Eclipse CDT, and
after experimentation and discussion, we ended up concluding that
starting GDB in CLI mode instead was both easier and actually also
supported an interesting use case -- connect an Eclipse frontend to a
GDB that is already running outside Eclipse.
The current usage is "new-ui <interpreter> <tty>".
E.g., on a terminal run this scriplet:
$ cat gdb-client
#!/bin/bash
reset
tty
tail -f /dev/null
$ gdb-client
/dev/pts/15
Now run gdb on another terminal, and tell it to start a MI interpreter
on the tty of the other terminal:
...
(gdb) new-ui mi /dev/pts/15
New UI allocated
Now back to the the gdb-client terminal, we'll get an MI prompt, ready
for MI input:
/dev/pts/15
=thread-group-added,id="i1"
(gdb)
You can also start a new UI running a CLI, with:
(gdb) new-ui console /dev/pts/15
Though note that this console won't support readline command editing.
It works as if "set editing off" was entered.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* interps.c (set_top_level_interpreter): New function, factored
out from captured_main.
(interpreter_completer): Make extern.
* interps.h (set_top_level_interpreter, interpreter_completer):
New declarations.
(captured_main): Use set_top_level_interpreter.
* top.c [!O_NOCTTY] (O_NOCTTY): Define as 0.
(open_terminal_stream, new_ui_command): New functions.
(init_main): Install the "new-ui" command.
Pedro Alves [Tue, 21 Jun 2016 00:11:54 +0000 (01:11 +0100)]
Make stdin be per UI
This commit makes each UI have its own "stdin" stream pointer. This
is used to determine whether the "from_tty" argument to
execute_command, etc. should be true.
Related, this commit makes input_from_terminal_p take an UI parameter,
and then avoids the gdb_has_a_terminal in it. gdb_has_a_terminal only
returns info on gdb's own main/primary terminal (the real stdin).
However, the places that call input_from_terminal_p really want to
know is whether the command came from an interactive tty. This patch
thus renames input_from_terminal_p to input_interactive_p for clarity,
and then makes input_interactive_p check for "set interactive" itself,
along with ISATTY, instead of calling gdb_has_a_terminal. Actually,
quit_force wants to call input_interactive_p _after_ stdin is closed,
we can't call ISATTY that late. So instead we save the result of
ISATTY in a field of the UI.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* cli/cli-script.c (read_next_line): Adjust to per-UI stdin.
(read_command_lines): Use input_interactive_p instead of
input_from_terminal_p.
* defs.h (struct ui): Forward declare.
(input_from_terminal_p): Rename to ...
(input_interactive_p): ... this.
* event-top.c (stdin_event_handler): Pass 0 as from_tty argument
to quit_command.
(command_handler): Adjust to per-UI stdin.
(handle_line_of_input): Adjust to per-UI stdin and use
input_interactive_p instead of ISATTY and input_from_terminal_p.
(gdb_readline_no_editing_callback): Adjust to per-UI stdin.
(command_line_handler): Always pass true as "from_tty" parameter
of handle_line_of_input and execute_command.
(async_sigterm_handler): Pass 0 as from_tty argument to
quit_command.
* inflow.c (interactive_mode, show_interactive_mode): Moved to ...
(gdb_has_a_terminal): Don't check interactive_mode here.
(_initialize_inflow): Don't install "set interactive-mode" here.
* main.c (captured_command_loop): Adjust to per-UI stdin.
* mi/mi-interp.c (mi_execute_command_wrapper): Adjust to per-UI
stdin.
* top.c (new_ui): Save the stdin stream and whether it's a tty.
(dont_repeat): Adjust to per-UI stdin.
(command_line_input): Adjust to per-UI stdin and to use
input_interactive_p.
(quit_force): Write history if any UI supports interactive input.
(interactive_mode, show_interactive_mode): Move here, from
inflow.c.
(input_from_terminal_p): Rename to ...
(input_interactive_p): ... this, and check the "interactive_mode"
global instead of calling gdb_has_a_terminal.
(_initialize_top): Install "set interactive-mode" here.
* top.h (struct ui) <stdin_stream, input_interactive_p>: New
fields.
* utils.c (quit): Pass 0 as from_tty argument to quit_force.
(defaulted_query): Adjust to per-UI stdin and to use
input_interactive_p.
Pedro Alves [Tue, 21 Jun 2016 00:11:54 +0000 (01:11 +0100)]
Handle UI's terminal closing
Without this, GDB exits if a secondary UIs terminal/input stream is
closed:
$ ./gdb -ex "new-ui mi /dev/pts/6"
New UI allocated
<<< close /dev/pts/6
(gdb) Error detected on fd 9
$
We want that for the main UI, but not secondary UIs.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* event-top.c (stdin_event_handler): Don't quit gdb if it was a
secondary UI's input stream that closed. Instead, just delete the
UI.
Pedro Alves [Tue, 21 Jun 2016 00:11:53 +0000 (01:11 +0100)]
Make main_ui be heap allocated
This is preparation for being able to create more than one UI object.
The change to gdb_main to stop using catch_errors is necessary because
catch_errors references current_uiout, which expands to
current_ui->m_current_ui, which would crash because current_ui is not
initialized yet at that point. It didn't trigger earlier in the
series because before this patch, main_ui/current_ui always start out
non-NULL.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* event-top.c (main_ui_): Delete.
(main_ui, current_ui, ui_list): No longer initialize here.
* main.c (captured_main): UI initialization code factored out to
new new_ui function.
(gdb_main): Wrap captured_main with TRY/CATCH instead of
catch_errors.
* top.c (highest_ui_num): New global.
(new_ui): New function.
* top.h (struct ui) <num>: New field.
(new_ui): New declaration.
Pedro Alves [Tue, 21 Jun 2016 00:11:53 +0000 (01:11 +0100)]
Only send sync execution command output to the UI that ran the command
Currently when a "step", "next", etc. finishes, the current source
line is printed on all console UIs.
This patch makes the CLI and TUI interpreters reuse MI's logic to only
emit console output related to a synchronous command on the
console-like interpreter that started the command in the first place.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* cli/cli-interp.c (cli_on_normal_stop): Bail out early if there's
nothing to print. Use should_print_stop_to_console.
* tui/tui-interp.c (tui_on_normal_stop): Likewise.
Pedro Alves [Tue, 21 Jun 2016 00:11:53 +0000 (01:11 +0100)]
Push thread->control.command_interp to the struct thread_fsm
I noticed that if we step into an inline function, step_1 never
reaches proceed, and thus nevers sets the thread's
tp->control.command_interp. Because of that,
should_print_stop_to_console fails to determine that is should print
stop output to the console.
The fix is to set the thread's command_interp earlier. However, I
realized that we can move that field to the thread_fsm, given that its
lifetime is exactly the same as thread_fsm. So the patch plumbs all
fsms constructors to take the command interp and store it in the
thread_fsm.
We can see the fix in action, with e.g., the gdb.opt/inline-cmds.exp
test, and issuing a step when stopped at line 67:
&"s\n"
^running
*running,thread-id="all"
(gdb)
~"67\t result = func2 ();\n"
*stopped,reason="end-stepping-range",frame={addr="0x00000000004004d0",func="main",args=[],file="/home/pedro/gdb/mygit/src/gdb/testsuite/gdb.opt/inline-cmds.c",fullname="/home/pedro/gdb/mygit/src/gdb/testsuite/gdb.opt/inline-cmds.c",line="67"},thread-id="1",stopped-threads="all",core="0"
(gdb)
s
&"s\n"
^running
*running,thread-id="all"
(gdb)
+ ~"func2 () at /home/pedro/gdb/mygit/src/gdb/testsuite/gdb.opt/inline-cmds.c:67\n"
+ ~"67\t result = func2 ();\n"
*stopped,reason="end-stepping-range",frame={addr="0x00000000004004d0",func="func2",args=[],file="/home/pedro/gdb/mygit/src/gdb/testsuite/gdb.opt/inline-cmds.c",fullname="/home/pedro/gdb/mygit/src/gdb/testsuite/gdb.opt/inline-cmds.c",line="67"},thread-id="1",stopped-threads="all",core="0"
(gdb)
(The inline-cmds.exp command is adjusted to exercise this.)
(Due to the follow_fork change, this also fixes "next N" across a fork
with "set follow-fork child" with "set detach-on-fork on". Commands
that rely on internal breakpoints, like "finish" will still require
more work to migrate breakpoints etc. to the child thread.)
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* breakpoint.c (new_until_break_fsm): Add 'cmd_interp' parameter.
(until_break_fsm_should_stop, until_break_fsm_clean_up): Add
thread parameter.
(until_break_command): Pass command interpreter to thread fsm
ctor.
* cli/cli-interp.c (should_print_stop_to_console): Adjust.
* gdbthread.h (struct thread_control_state) <command_interp>:
Delete field.
* infcall.c (new_call_thread_fsm): Add 'cmd_interp' parameter.
Pass it down.
(call_thread_fsm_should_stop): Add thread parameter.
(call_function_by_hand_dummy): Pass command interpreter to thread
fsm ctor. Pass thread pointer to fsm clean up method.
* infcmd.c: Include interps.h.
(struct step_command_fsm) <thread>: Delete field.
(new_step_command_fsm): Add 'cmd_interp' parameter. Pass it down.
(step_command_fsm_prepare): Remove references to fsm's thread
field.
(step_1): Pass command interpreter to thread
fsm ctor. Pass thread pointer to fsm clean up method.
(step_command_fsm_should_stop, step_command_fsm_clean_up): Add
thread parameter and use it.
(new_until_next_fsm): Add 'cmd_interp' parameter. Pass it down.
(until_next_fsm_should_stop, until_next_fsm_clean_up): Add thread
parameter and use it.
(until_next_command): Pass command interpreter to thread fsm ctor.
(struct finish_command_fsm) <thread>: Delete field.
(finish_command_fsm_ops): Add NULL slot for should_notify_stop.
(new_finish_command_fsm): Add 'cmd_interp' parameter and pass it
down. Remove thread parameter and adjust.
(finish_command_fsm_should_stop, finish_command_fsm_clean_up): Add
thread parameter and use it.
(finish_command): Pass command interpreter to thread fsm ctor.
Don't pass thread.
* infrun.c (follow_fork): Move thread fsm to child fork instead of
command interpreter, only.
(clear_proceed_status_thread): Remove reference to command_interp.
(proceed): Don't record the thread's command interpreter.
(clean_up_just_stopped_threads_fsms): Pass thread to fsm clean_up
method.
(fetch_inferior_event): Pass thread to fsm should_stop method.
* thread-fsm.c (thread_fsm_ctor): Add 'cmd_interp' parameter.
Store it.
(thread_fsm_clean_up, thread_fsm_should_stop): Add thread
parameter and pass it down.
* thread-fsm.h (struct thread_fsm) <command_interp>: New field.
(struct thread_fsm_ops) <clean_up, should_stop>: Add thread
parameter.
(thread_fsm_ctor): Add 'cmd_interp' parameter.
(thread_fsm_clean_up, thread_fsm_should_stop): Add thread
parameter.
* thread.c (thread_cancel_execution_command): Pass thread to
thread fsm clean_up method.
gdb/testsuite/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* gdb.opt/inline-cmds.c: Add "set mi break here" marker.
* gdb.opt/inline-cmds.exp: Add MI tests.
Pedro Alves [Tue, 21 Jun 2016 00:11:52 +0000 (01:11 +0100)]
New function should_print_stop_to_console
There's code in the MI interpreter that decides whether a stop should
be sent to MI's console stream. Move this check to the CLI
interpreter code, so that we can reuse it in both the CLI and TUI
interpreters.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* cli/cli-interp.c: Include gdbthread.h and thread-fsm.h.
(should_print_stop_to_console): New function, factored out from
mi_on_normal_stop_1.
* cli/cli-interp.h (should_print_stop_to_console): Declare.
* mi/mi-interp.c (mi_on_normal_stop_1): Use
should_print_stop_to_console. Pass it the current UI's console
interpreter.
* mi/mi-main.c (captured_mi_execute_command): Use the
INTERP_CONSOLE symbol rather than explicit "console".
Pedro Alves [Tue, 21 Jun 2016 00:11:52 +0000 (01:11 +0100)]
Fix for spurious prompts in secondary UIs
Running mi-break.exp with MI on a secondary UI reveals that MI emits
spurious prompts compared MI running as primary UI:
-exec-continue
^running
*running,thread-id="all"
(gdb)
=breakpoint-modified,bkpt={number="9",type="breakpoint",disp="keep",enabled="y",func="callee2",line="39",script={"set $i=0","while $i<10","print $i","set $i=$i+1","end","continue"}}
~"\n"
~"Breakpoint 9, callee2 (intarg=2, strarg=0x400730 \"A string argument.\") at ...src/gdb/testsuite/gdb.mi/basics.c:39\n"
~"39\t callee3 (strarg);\n"
*stopped,reason="breakpoint-hit",disp="keep",bkptno="9",frame={addr="0x00000000004005dd",func="callee2",...
*running,thread-id="all"
>> (gdb)
=breakpoint-modified,bkpt={number="9",...
~"\n"
~"Breakpoint 9, callee2 (intarg=2, strarg=0x400730 \"A string argument.\") at ...src/gdb/testsuite/gdb.mi/basics.c:39\n"
~"39\t callee3 (strarg);\n"
*stopped,reason="breakpoint-hit",disp="keep",bkptno="9",...
*running,thread-id="all"
~"[Inferior 1 (process 12639) exited normally]\n"
=thread-exited,id="1",group-id="i1"
=thread-group-exited,id="i1",exit-code="0"
*stopped,reason="exited-normally"
FAIL: gdb.mi/mi-break.exp: intermediate stop and continue
FAIL: gdb.mi/mi-break.exp: test hitting breakpoint with commands (timeout)
Note the line marked >> above.
The test sets a breakpoint that runs "continue", a foreground command.
When we get to run the "continue", we've already emitted the *stopped
event on the MI UI, and set its prompt state to PROMPT_NEEDED (this is
done from within normal_stop). Since inferior events are always
handled with the main UI as current UI, breakpoint commands always run
with the main UI as current UI too. This means that the "continue"
ends up always disabling the prompt on the main UI, instead of the UI
that had just been done with synchronous execution.
I think we'll want to extend this with a concept of "set of
threads/inferiors a UI/interpreter is blocked waiting on", but I'm
leaving that for a separate series.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* infcmd.c (prepare_execution_command): Use
all_uis_on_sync_execution_starting.
* infrun.c (all_uis_on_sync_execution_starting): New function.
* infrun.h (all_uis_on_sync_execution_starting): Declare.
Pedro Alves [Tue, 21 Jun 2016 00:11:51 +0000 (01:11 +0100)]
Replace the sync_execution global with a new enum prompt_state tristate
When sync_execution (a boolean) is true, it means we're running a
foreground command -- we hide the prompt stop listening to input, give
the inferior the terminal, then go to the event loop waiting for the
target to stop.
With multiple independent UIs, we need to track whether each UI is
synchronously blocked waiting for the target. IOW, if you do
"continue" in one console, that console stops accepting commands, but
you should still be free to type other commands in the others
consoles.
Just simply making sync_execution be per-UI alone not sufficient,
because of this in fetch_inferior_event:
/* If the inferior was in sync execution mode, and now isn't,
restore the prompt (a synchronous execution command has finished,
and we're ready for input). */
if (current_ui->async && was_sync && !sync_execution)
observer_notify_sync_execution_done ();
We'd have to record at entry the "was_sync" state for each UI, not
just of the current UI.
This patch instead replaces the sync_execution flag by a per-UI
tristate flag indicating the command line prompt state:
enum prompt_state
{
/* The command line is blocked simulating synchronous execution.
This is used to implement the foreground execution commands
('run', 'continue', etc.). We won't display the prompt and
accept further commands until the execution is actually over. */
PROMPT_BLOCKED,
/* The command finished; display the prompt before returning back to
the top level. */
PROMPT_NEEDED,
/* We've displayed the prompt already, ready for input. */
PROMPTED,
;
I think the end result is _much_ clearer than the current code, and,
it addresses the original motivation too.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* annotate.c: Include top.h.
(async_background_execution_p): Delete.
(print_value_flags): Check the UI's prompt state rather then
async_background_execution_p.
* event-loop.c (start_event_loop): Set the prompt state to
PROMPT_NEEDED.
* event-top.c (display_gdb_prompt, async_enable_stdin)
(async_disable_stdin): Check the current UI's prompt state instead
of the sync_execution global.
(command_line_handler): Set the prompt state to PROMPT_NEEDED
before running a command, and display the prompt if still needed
afterwards.
* infcall.c (struct call_thread_fsm) <waiting_ui>: New field.
(new_call_thread_fsm): New parameter 'waiting_ui'. Store it.
(call_thread_fsm_should_stop): Set the prompt state to
PROMPT_NEEDED.
(run_inferior_call): Adjust to temporarily set the prompt state to
PROMPT_BLOCKED instead of using the sync_execution global.
(call_function_by_hand_dummy): Pass the current UI to
new_call_thread_fsm.
* infcmd.c: Include top.h.
(continue_1): Check the current UI's prompt state instead of the
sync_execution global.
(continue_command): Validate global execution state before calling
prepare_execution_command.
(step_1): Call all_uis_check_sync_execution_done.
(attach_post_wait): Don't call async_enable_stdin here. Remove
reference to sync_execution.
* infrun.c (sync_execution): Delete global.
(follow_fork_inferior)
(reinstall_readline_callback_handler_cleanup): Check the current
UI's prompt state instead of the sync_execution global.
(check_curr_ui_sync_execution_done)
(all_uis_check_sync_execution_done): New functions.
(fetch_inferior_event): Call all_uis_check_sync_execution_done
instead of trying to determine whether the global sync execution
changed.
(handle_no_resumed): Check the prompt state of all UIs.
(normal_stop): Emit the no unwait-for even to all PROMPT_BLOCKED
UIs. Emit the "Switching to" notification to all UIs. Enable
stdin in all UIs.
* infrun.h (sync_execution): Delete.
(all_uis_check_sync_execution_done): Declare.
* main.c (captured_command_loop): Don't call
interp_pre_command_loop if the prompt is blocked.
(catch_command_errors, catch_command_errors_const): Adjust.
(captured_main): Set the initial prompt state to PROMPT_NEEDED.
* mi/mi-interp.c (display_mi_prompt): Set the prompt state to
PROMPTED.
(mi_interpreter_resume): Don't clear sync_execution. Remove hack
comment.
(mi_execute_command_input_handler): Set the prompt state to
PROMPT_NEEDED before executing the command, and only display the
prompt if the prompt state is PROMPT_NEEDED afterwards.
(mi_on_resume_1): Adjust to check the prompt state.
* target.c (target_terminal_inferior): Adjust to check the prompt
state.
* top.c (wait_sync_command_done, maybe_wait_sync_command_done)
(execute_command): Check the current UI's prompt state instead of
sync_execution.
* top.h (enum prompt_state): New.
(struct ui) <prompt_state>: New field.
(ALL_UIS): New macro.
Pedro Alves [Tue, 21 Jun 2016 00:11:51 +0000 (01:11 +0100)]
Make gdb_in_secondary_prompt_p() be per UI
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* top.c (gdb_secondary_prompt_depth): Delete.
(gdb_in_secondary_prompt_p): Add ui parameter. Use it.
(gdb_readline_wrapper_cleanup, gdb_readline_wrapper): Adjust to
per-UI gdb_secondary_prompt_depth.
* top.h (struct ui) <secondary_prompt_depth>: New field.
Pedro Alves [Tue, 21 Jun 2016 00:11:51 +0000 (01:11 +0100)]
Simplify starting the command event loop
All interpreter types (CLI/TUI/MI) print the prompt, and then call
start_event_loop.
Because we'll need an interpreter hook to display the
interpreter-specific prompt before going back to the event loop,
without actually starting an event loop, this patch moves the
start_event_loop call to common code, and replaces the command_loop
hook with a pre_command_look hook, that now just prints the prompt.
Turns out to be a cleanup on its own right anyway.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* cli/cli-interp.c (cli_interpreter_pre_command_loop): New
function.
(cli_interp_procs): Install it instead of cli_command_loop.
* cli/cli-interp.h (cli_interpreter_pre_command_loop): Declare.
* event-top.c (cli_command_loop): Delete.
* interps.c (interp_new): Remove reference to command_loop_proc.
(current_interp_command_loop): Delete.
(interp_pre_command_loop): New function.
(interp_command_loop_ftype): Delete.
* interps.h (interp_pre_command_loop_ftype): New typedef.
(struct interp_procs) <command_loop_proc>: Delele field.
<pre_command_loop_proc>: New field.
(current_interp_command_loop): Delete declaration.
(interp_pre_command_loop): New declaration.
* main.c (captured_command_loop): Call interp_pre_command_loop
instead of current_interp_command_loop and start an event loop.
* mi/mi-interp.c (mi_command_loop): Delete.
(mi_interpreter_pre_command_loop): New.
(mi_interp_procs): Update.
* tui/tui-interp.c (tui_interp_procs): Install
cli_interpreter_pre_command_loop instead of cli_command_loop.
Pedro Alves [Tue, 21 Jun 2016 00:11:50 +0000 (01:11 +0100)]
Make raw_stdout be per MI instance
Each MI instance should obviously have its own raw output channel,
along with save_raw_stdout.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* interps.c (current_interpreter): New function.
* interps.h (current_interpreter): New declaration.
* mi/mi-cmds.h (raw_stdout): Delete declaration.
* mi/mi-common.h (struct mi_interp) <raw_stdout,
saved_raw_stdout>: New field.
* mi/mi-interp.c (display_mi_prompt): New parameter 'mi'. Adjust
to per-UI raw_stdout.
(mi_interpreter_init): Adjust to per-UI raw_stdout.
(mi_on_sync_execution_done, mi_execute_command_input_handler)
(mi_command_loop): Pass MI instance to display_mi_prompt.
(mi_on_normal_stop_1, mi_output_running_pid, mi_on_resume_1)
(mi_on_resume): Adjust to per-UI raw_stdout.
(saved_raw_stdout): Delete.
(mi_set_logging): Adjust to per-UI raw_stdout and
saved_raw_stdout.
* mi/mi-main.c (raw_stdout): Delete.
(mi_cmd_gdb_exit, captured_mi_execute_command)
(mi_print_exception, mi_load_progress): Adjust to per-UI
raw_stdout.
(print_diff_now, mi_print_timing_maybe): New ui_file parameter.
Pass it along.
(print_diff): New ui_file parameter. Send output there instead of
raw_stdout.
* mi/mi-main.h (struct ui_file): Forward declare.
(mi_print_timing_maybe): Add ui_file parameter.
Pedro Alves [Tue, 21 Jun 2016 00:11:50 +0000 (01:11 +0100)]
Introduce display_mi_prompt
Just a refactor.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* mi/mi-interp.c (display_mi_prompt): New function.
Pedro Alves [Tue, 21 Jun 2016 00:11:49 +0000 (01:11 +0100)]
Make target_terminal_inferior/ours almost nops on non-main UIs
Since we always run the inferior in the main console (unless "set
inferior-tty" is in effect), when some UI other than the main one
calls target_terminal_inferior/target_terminal_inferior, then we only
register/unregister the UI's input from the event loop, but leave the
main UI's terminal settings as is.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* target.c (target_terminal_inferior): Bail out after
unregistering input_fd if not on the main UI.
(target_terminal_ours): Bail out after registering input_fd if not
on the main UI.
(target_terminal_ours_for_output): Bail out if not on the main UI.
Pedro Alves [Tue, 21 Jun 2016 00:11:49 +0000 (01:11 +0100)]
Always process target events in the main UI
This makes target events always be always processed with the main UI
as current UI. This way, warnings, debug output, etc. are always
consistently sent to the main console.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* event-top.c (restore_ui_cleanup): Make extern.
* infrun.c (fetch_inferior_event): Always switch to the main UI.
* top.h (restore_ui_cleanup): Declare.
Pedro Alves [Tue, 21 Jun 2016 00:11:48 +0000 (01:11 +0100)]
Make command line editing (use of readline) be per UI
Due to the way that readline's API works (based on globals), we can
only have one instance of readline in a process. So the goal of this
patch is to only allow editing in the main UI, and make sure that only
one UI calls into readline. Some MI paths touch readline variables
currently, which is bad as that is changing variables that matter for
the main console UI. This patch fixes those.
This actually fixes a nasty bug -- starting gdb in MI mode ("gdb
-i=mi"), and then doing "set editing on" crashes GDB, because MI is
not prepared to use readline:
set editing on
&"set editing on\n"
=cmd-param-changed,param="editing",value="on"
^done
(gdb)
p 1
readline: readline_callback_read_char() called with no handler!
Aborted (core dumped)
The fix for that was to add an interp_proc method to query the
interpreter whether it actually supports editing. New test included.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
PR mi/20034
* cli/cli-interp.c: Include cli-interp.h and event-top.h.
(cli_interpreter_resume): Pass 1 to gdb_setup_readline. Set the
UI's input_handler here.
(cli_interpreter_supports_command_editing): New function.
(cli_interp_procs): Install it.
* cli/cli-interp.h: New file.
* event-top.c (async_command_editing_p): Rename to ...
(set_editing_cmd_var): ... this.
(change_line_handler): Add parameter 'editing', and use it. Bail
early if the interpreter doesn't support editing. Don't touch
readline state if editing is off.
(gdb_rl_callback_handler_remove, gdb_rl_callback_handler_install)
(gdb_rl_callback_handler_reinstall): Assert the current UI is the
main UI.
(display_gdb_prompt): Don't call gdb_rl_callback_handler_remove if
not using readline. Check whether the current UI is using command
editing instead of checking the async_command_editing_p global.
(set_async_editing_command): Delete.
(gdb_setup_readline): Add 'editing' parameter. Only allow editing
on the main UI. Don't touch readline state if editing is off.
(gdb_disable_readline): Don't touch readline state if editing is
off.
* event-top.h (gdb_setup_readline): Add 'int' parameter.
(set_async_editing_command): Delete declaration.
(change_line_handler, command_line_handler): Declare.
(async_command_editing_p): Rename to ...
(set_editing_cmd_var): ... this.
* infrun.c (reinstall_readline_callback_handler_cleanup): Check
whether the current UI has editing enabled rather than checking
the async_command_editing_p global.
* interps.c (interp_supports_command_editing): New function.
* interps.h (interp_supports_command_editing_ftype): New typedef.
(struct interp_procs) <supports_command_editing_proc>: New field.
(interp_supports_command_editing): Declare.
* mi/mi-interp.c (mi_interpreter_resume): Pass 0 to
gdb_setup_readline. Don't clear the async_command_editing_p
global. Update comments.
* top.c (gdb_readline_wrapper_line, gdb_readline_wrapper): Check
whether the current UI has editing enabled rather than checking
the async_command_editing_p global. Don't touch readline state if
editing is off.
(undo_terminal_modifications_before_exit): Switch to the main UI.
Unconditionally call gdb_disable_readline.
(set_editing): New function.
(show_async_command_editing_p): Rename to ...
(show_editing): ... this. Show the state of the current UI.
(_initialize_top): Adjust.
* top.h (struct ui) <command_editing>: New field.
* tui/tui-interp.c: Include cli/cli-interp.h.
(tui_resume): Pass 1 to gdb_setup_readline. Set the UI's
input_handler.
(tui_interp_procs): Install
cli_interpreter_supports_command_editing.
* tui/tui-io.c (tui_getc): Check whether the current UI has
editing enabled rather than checking the async_command_editing_p
global.
gdb/testsuite/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
PR mi/20034
* gdb.mi/mi-editing.exp: New file.
Pedro Alves [Tue, 21 Jun 2016 00:11:48 +0000 (01:11 +0100)]
Make current_ui_out be per UI
Similarly to gdb_stdout&co.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* top.c: Call gen_ret_current_ui_field_ptr for current_uiout.
* top.h (struct ui) <m_current_uiout>: New field.
* ui-out.c (current_uiout): Delete.
* ui-out.h (current_uiout): Delete.
(current_ui_current_uiout_ptr): New declaration.
(current_uiout): Reimplement as wrapper around
current_ui_current_uiout_ptr.
Pedro Alves [Tue, 21 Jun 2016 00:11:48 +0000 (01:11 +0100)]
Delete def_uiout
Currently, current_uiout starts out pointing to def_uiout, a dummy
ui_out implementation.
Since we create a replacement uiout early on as soon as we create the
interpreter, we never actually use def_uiout. So this patch removes
it.
The proof that it works is that starting with current_uiout set to
NULL does not crash.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* ui-out.c (default_ui_out_impl): Delete.
(def_uiout): Delete.
(current_uiout): Set to NULL.
(default_table_begin, default_table_body, default_table_end)
(default_table_header, default_begin, default_end)
(default_field_int, default_field_skip, default_field_string)
(default_field_fmt, default_spaces, default_text, default_message)
(default_wrap_hint, default_flush, default_data_destroy): Delete.
Pedro Alves [Tue, 21 Jun 2016 00:11:47 +0000 (01:11 +0100)]
Make out and error streams be per UI
stderr_fileopen () references stderr directly, which doesn't work when
we have a separate UI with its own stderr-like stream. So this also
adds a "errstream" to "struct ui", and plumbs stderr_fileopen to take
a stream parameter.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* event-top.c (gdb_setup_readline): Pass the UI's outstream and
errstream to stdout_fileopen and stderr_fileopen.
* exceptions.c: Include top.h.
(print_flush): Open the current UI's outstream file descriptor,
instead of hardcoding file descriptor 1.
* main.c (captured_main): Save the main UI's out and error
streams. Adjust stderr_fileopen call.
* top.h (struct ui) <outstream, errstream>: New fields.
* ui-file.c (stderr_fileopen): Add stream parameter. Use it
instead of stderr.
* ui-file.h (stderr_fileopen): Add stream parameter and update
comment.
Pedro Alves [Tue, 21 Jun 2016 00:11:47 +0000 (01:11 +0100)]
Make input_fd be per UI
And with that, we can switch the current UI to the UI whose input
descriptor woke up the event loop. IOW, if the user types in UI 2,
the event loop wakes up, switches to UI 2, and processes the input.
Next the user types in UI 3, the event loop wakes up and switches to
UI 3, etc.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* event-top.c (input_fd): Delete.
(stdin_event_handler): Switch to the UI whose input descriptor got
the event. Adjust to per-UI input_fd.
(gdb_setup_readline): Don't set the input_fd global. Adjust to
per-UI input_fd.
(gdb_disable_readline): Adjust to per-UI input_fd.
* event-top.h (input_fd): Delete declaration.
* linux-nat.c (linux_nat_terminal_inferior): Don't remove input_fd
from the event-loop here.
(linux_nat_terminal_ours): Don't register input_fd in the
event-loop here.
* main.c (captured_main): Adjust to per-UI input_fd.
* remote.c (remote_terminal_inferior): Don't remove input_fd from
the event-loop here.
(remote_terminal_ours): Don't register input_fd in the event-loop
here.
* target.c: Include top.h and event-top.h.
(target_terminal_inferior): Remove input_fd from the event-loop
here.
(target_terminal_ours): Register input_fd in the event-loop.
* top.h (struct ui) <input_fd>: New field.
Pedro Alves [Tue, 21 Jun 2016 00:11:46 +0000 (01:11 +0100)]
Make instream be per UI
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* cli/cli-script.c (execute_user_command, read_next_line)
(read_next_line): Adjust to per-UI instream.
* event-top.c (stdin_event_handler, command_handler)
(handle_line_of_input, command_line_handler)
(gdb_readline_no_editing_callback, async_sigterm_handler)
(gdb_setup_readline): Likewise.
* inflow.c: Include top.h.
(gdb_has_a_terminal, child_terminal_init_with_pgrp)
(gdb_save_tty_state, child_terminal_inferior)
(child_terminal_ours_1, copy_terminal_info): Use the main UI.
(initialize_stdin_serial): Adjust to per-UI instream.
* main.c (captured_command_loop, captured_main): Adjust to per-UI
instream.
* mi/mi-interp.c (mi_execute_command_wrapper): Likewise.
* python/python.c (python_interactive_command): Likewise.
* terminal.h (struct ui): Forward declare.
(initialize_stdin_serial): Add struct ui parameter.
* top.c (instream): Delete.
(do_restore_instream_cleanup, read_command_file, dont_repeat)
(gdb_readline_no_editing, command_line_input)
(input_from_terminal_p, gdb_init): Adjust to per-UI instream.
* top.h (struct ui) <instream>: New field.
(instream): Delete declaration.
(quit): Adjust to per-UI instream.
gdb/testsuite/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* gdb.gdb/selftest.exp (do_steps_and_nexts): Add new regexp.
Pedro Alves [Tue, 21 Jun 2016 00:11:46 +0000 (01:11 +0100)]
Always run async signal handlers in the main UI
Async signal handlers have no connection to whichever was the current
UI, and thus always run on the main one.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* event-loop.c: Include top.h.
(invoke_async_signal_handlers): Switch to the main UI.
* event-top.c (main_ui_): Update comment.
(main_ui): New global.
* top.h (main_ui): Declare.
Pedro Alves [Tue, 21 Jun 2016 00:11:45 +0000 (01:11 +0100)]
Make the intepreters output to all UIs
When we have multiple consoles, MI channels, etc., then we need to
broadcast breakpoint hits, etc. to all UIs. In the past, I've
adjusted most of the run control to communicate events to the
interpreters through observer notifications, so events would be
properly sent to console and MI streams, in sync and async modes.
This patch does the next logical step -- have each interpreter's
observers output interpreter-specific info to _all_ UIs.
Note that when we have multiple instances of active cli/tui
interpreters, then the cli_interp and tui_interp globals no longer
work. This is addressed by this patch.
Also, the interpreters currently register some observers when resumed
and remove them when suspended. If we have multiple instances of the
interpreters, and they can be suspended/resumed at different,
independent times, that no longer works. What we instead do is always
install the observers, and then have the observers themselves know
when to do nothing.
An earlier prototype of this series did the looping over struct UIs in
common code, and then dispatched events to the interpreters through a
matching interp_on_foo method for each observer. That turned out a
lot more complicated than the present solution, as we'd end up with
having to create a new interp method every time some interpreter
wanted to listen to some observer notification, resulting in a lot of
duplicated make-work and more coupling than desirable.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* cli/cli-interp.c (cli_interp): Delete.
(as_cli_interp): New function.
(cli_on_normal_stop, cli_on_signal_received)
(cli_on_end_stepping_range, cli_on_signal_exited, cli_on_exited)
(cli_on_no_history): Send output to all CLI UIs.
(cli_on_sync_execution_done, cli_on_command_error): Skip output if
the top level interpreter is not a CLI.
(cli_interpreter_init): Don't set cli_interp or install observers
here.
(_initialize_cli_interp): Install observers here.
* event-top.c (main_ui_, ui_list): New globals.
(current_ui): Point to main_ui_.
(restore_ui_cleanup, switch_thru_all_uis_init)
(switch_thru_all_uis_cond, switch_thru_all_uis_next): New
functions.
* mi/mi-interp.c (as_mi_interp): New function.
(mi_interpreter_init): Don't install observers here.
(mi_on_sync_execution_done): Skip output if the top level
interpreter is not a MI.
(mi_new_thread, mi_thread_exit, mi_record_changed)
(mi_inferior_added, mi_inferior_appeared, mi_inferior_exit)
(mi_inferior_removed): Send output to all MI UIs.
(find_mi_interpreter, mi_interp_data): Delete.
(find_mi_interp): New function.
(mi_on_signal_received, mi_on_end_stepping_range)
(mi_on_signal_exited, mi_on_exited, mi_on_no_history): Send output
to all MI UIs.
(mi_on_normal_stop): Rename to ...
(mi_on_normal_stop_1): ... this.
(mi_on_normal_stop): Reimplement, sending output to all MI UIs.
(mi_traceframe_changed, mi_tsv_created, mi_tsv_deleted)
(mi_tsv_modified, mi_breakpoint_created, mi_breakpoint_deleted)
(mi_breakpoint_modified, mi_output_running_pid): Send output to
all MI UIs.
(mi_on_resume): Rename to ...
(mi_on_resume_1): ... this. Don't handle infcalls here.
(mi_on_resume): Reimplement, sending output to all MI UIs.
(mi_solib_loaded, mi_solib_unloaded, mi_command_param_changed)
(mi_memory_changed): Send output to all MI UIs.
(report_initial_inferior): Install observers here.
* top.h (struct ui) <next>: New field.
(ui_list): Declare.
(struct switch_thru_all_uis): New.
(switch_thru_all_uis_init, switch_thru_all_uis_cond)
(switch_thru_all_uis_next): Declare.
(SWITCH_THRU_ALL_UIS): New macro.
* tui/tui-interp.c (tui_interp): Delete global.
(as_tui_interp): New function.
(tui_on_normal_stop, tui_on_signal_received)
(tui_on_end_stepping_range, tui_on_signal_exited, tui_on_exited)
(tui_on_no_history): Send output to all TUI UIs.
(tui_on_sync_execution_done, tui_on_command_error): Skip output if
the top level interpreter is not a TUI.
(tui_init): Don't set tui_interp or install observers here.
(_initialize_tui_interp): Install observers here.
Pedro Alves [Tue, 21 Jun 2016 00:11:45 +0000 (01:11 +0100)]
Introduce interpreter factories
If every UI instance has its own set of interpreters, then the current
scheme of creating the interpreters at GDB initialization time no
longer works. We need to create them whenever a new UI instance is
created.
The scheme implemented here has each interpreter register a factory
callback that when called creates a new instance of a specific
interpreter type. Then, when some code in gdb looks up an interpreter
(always by name), if there's none yet, the factory method is called to
construct one.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* cli/cli-interp.c (cli_uiout): Delete, moved into ...
(struct cli_interp): ... this new structure.
(cli_on_normal_stop, cli_on_signal_received)
(cli_on_end_stepping_range, cli_on_signal_exited, cli_on_exited)
(cli_on_no_history): Use interp_ui_out.
(cli_interpreter_init): If top level, set the cli_interp global.
(cli_interpreter_init): Return the interp's data instead of NULL.
(cli_interpreter_resume, cli_interpreter_exec, cli_ui_out): Adjust
to cli_uiout being in the interpreter's data.
(cli_interp_procs): New, factored out from _initialize_cli_interp.
(cli_interp_factory): New function.
(_initialize_cli_interp): Call interp_factory_register.
* interps.c (get_interp_info): New, factored out from ...
(get_current_interp_info): ... this.
(interp_new): Add parameter 'data'. Store it.
(struct interp_factory): New function.
(interp_factory_p): New typedef. Define a VEC_P.
(interpreter_factories): New global.
(interp_factory_register): New function.
(interp_add): Add 'ui' parameter. Use get_interp_info and
interp_lookup_existing.
(interp_lookup): Rename to ...
(interp_lookup_existing): ... this. Add 'ui' parameter. Don't
check for NULL or empty name here.
(interp_lookup): Add 'ui' parameter and reimplement.
(interp_set_temp, interpreter_exec_cmd): Adjust.
(interpreter_completer): Complete on registered interpreter
factories instead of interpreters.
* interps.h (interp_factory_func): New typedef.
(interp_factory_register): Declare.
(interp_new, interp_add): Adjust.
(interp_lookup): Declare.
* main.c (captured_main): Adjust.
* mi/mi-interp.c (mi_cmd_interpreter_exec): Adjust.
(mi_interp_procs): New, factored out from
_initialize_mi_interp.
(mi_interp_factory): New function.
* python/python.c (execute_gdb_command): Adjust.
* tui/tui-interp.c (tui_init): If top level, set the tui_interp
global.
(tui_interp_procs): New.
(tui_interp_factory): New function.
(_initialize_tui_interp): Call interp_factory_register.
Pedro Alves [Tue, 21 Jun 2016 00:11:45 +0000 (01:11 +0100)]
Make the interpreters be per UI
Make each UI have its own interpreter list, top level interpreter,
current interpreter, etc. The "interpreter_async" global is not
really specific to an struct interp (it crosses interpreter-exec ...),
so I moved it to "struct ui" directly, while the other globals were
left hidden in interps.c, opaque to the rest of GDB.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* breakpoint.c (bpstat_do_actions_1): Access the current UI's
async field instead of the interpreter_async global.
* cli/cli-script.c (execute_user_command, while_command)
(if_command, script_from_file): Likewise.
* compile/compile.c: Include top.h instead of interps.h.
(compile_file_command, compile_code_command)
(compile_print_command): Access the current UI's async field
instead of the interpreter_async global.
* guile/guile.c: Include top.h instead of interps.h.
(guile_repl_command, guile_command, gdbscm_execute_gdb_command):
Access the current UI's async field instead of the
interpreter_async global.
* guile/scm-ports.c: Include top.h instead of interps.h.
(ioscm_with_output_to_port_worker): Access the current UI's async
field instead of the interpreter_async global.
* inf-loop.c (inferior_event_handler): Likewise.
* infcall.c (run_inferior_call): Likewise.
* infrun.c (reinstall_readline_callback_handler_cleanup)
(fetch_inferior_event): Likewise.
* interps.c (interpreter_async): Delete.
(struct ui_interp_info): New.
(get_current_interp_info): New function.
(interp_list, current_interpreter, top_level_interpreter_ptr):
Delete.
(interp_add, interp_set, interp_lookup, interp_ui_out)
(current_interp_set_logging, interp_set_temp)
(current_interp_named_p): Adjust to per-UI interpreters.
(command_interpreter): Delete.
(command_interp, current_interp_command_loop, interp_quiet_p)
(interp_exec, interpreter_exec_cmd, interpreter_completer)
(top_level_interpreter, top_level_interpreter_data): Adjust to
per-UI interpreters.
* interps.h (interpreter_async): Delete.
* main.c (captured_command_loop): Access the current UI's async
field instead of the interpreter_async global.
* python/python.c (python_interactive_command, python_command)
(execute_gdb_command): Likewise.
* top.c (maybe_wait_sync_command_done, execute_command_to_string):
Access the current UI's async field instead of the
interpreter_async global.
* top.h (struct tl_interp_info): Forward declare.
(struct ui) <interp_info, async>: New fields.
Pedro Alves [Tue, 21 Jun 2016 00:11:44 +0000 (01:11 +0100)]
Make gdb_stdout&co be per UI
We need to have these send output to the proper UI.
However, this patch still make them look like globals. Kind of like
__thread variables, if you will. Changing everything throughout to
write something like current_ui->gdb_stdout instead would be massive
overkill, IMNSHO.
This leaves gdb_stdtargin/stdtarg/stdtargerr global, but maybe that was a
mistake, I'm not sure -- IIRC, MI formats target I/O differently, so
if we have a separate MI channel, then I guess target output should go
there instead of to gdb's stdout. OTOH, maybe GDB should send that
instead to "set inferior-tty", instead of multiplexing it over MI. We
can always fix those later when it gets clearer where they should go.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* main.c (gdb_stdout, gdb_stderr, gdb_stdlog, gdb_stdin): Delete
globals.
(gen_ret_current_ui_field_ptr): New macro. Use it to generate
wrappers for gdb_stdout, gdb_stderr, gdb_stdlog and gdb_stdin.
* top.h (struct ui) <m_gdb_stdout, m_gdb_stdin, m_gdb_stderr,
m_gdb_stdlog>: New fields.
(current_ui_gdb_stdout_ptr, current_ui_gdb_stdin_ptr)
(current_ui_gdb_stderr_ptr, current_ui_gdb_stdlog_ptr): Declare.
(gdb_stdout, gdb_stdin, gdb_stderr, gdb_stdlog): Reimplement as
macros.
Pedro Alves [Tue, 21 Jun 2016 00:11:44 +0000 (01:11 +0100)]
Introduce "struct ui"
This is a step towards supporting multiple consoles/MIs, each on its
own stdio streams / terminal.
See intro comment in top.h.
(I've had trouble picking a name for this object. I've started out
with "struct console" originally. But then this is about MI as well,
and there's "interpreter-exec console", which is specifically about
the CLI...
So I changed to "struct terminal", but, then we have a terminal object
that works when the input is not a terminal as well ...
Then I sort of gave up and renamed it to "struct top_level". But it
then gets horribly confusing when we talk about the "top level
interpreter that's running on the current top level".
In the end, I realized we're already sort of calling this "ui", in
struct ui_out, struct ui_file, and a few coments here and there.)
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* event-top.c: Update readline-related comments.
(input_handler, call_readline): Delete globals.
(gdb_rl_callback_handler): Call the current UI's input_handler
method.
(change_line_handler): Adjust to set current UI's properties
instead of globals.
(current_ui_, current_ui): New globals.
(get_command_line_buffer): Rewrite to refer to the current UI.
(stdin_event_handler): Adjust to call the call_readline method of
the current UI.
(gdb_readline_no_editing_callback): Adjust to call the current UI's
input_handler method.
(gdb_setup_readline): Adjust to set current UI's properties
instead of globals.
* event-top.h (call_readline, input_handler): Delete declarations.
* mi/mi-interp.c (mi_interpreter_resume): Adjust to set current
UI's properties instead of globals.
* top.c (gdb_readline_wrapper_cleanup): Adjust to set current UI's
properties instead of globals.
(gdb_readline_wrapper): Adjust to call and set current UI's
methods instead of globals.
* top.h: Include buffer.h and event-loop.h.
(struct ui): New struct.
(current_ui): New declaration.
Pedro Alves [Tue, 21 Jun 2016 00:11:43 +0000 (01:11 +0100)]
[Ada catchpoints] Fix "warning: failed to get exception name: No definition of \"e.full_name\" in current context"
Looking at testsuite results, I noticed this warning in an MI test:
~"\nCatchpoint "
~"2, "
&"warning: failed to get exception name: No definition of \"e.full_name\" in current context.\n"
~"exception at 0x000000000040192d in foo () at /home/pedro/brno/pedro/gdb/mygit/src/gdb/testsuite/gdb.ada/mi_catch_ex/foo.adb:20\n"
~"20\t raise Constraint_Error; -- SPOT1\n"
*stopped,reason="breakpoint-hit",disp="keep",bkptno="2",exception-name="CONSTRAINT_ERROR",frame={addr="0x000000000040192d",func="foo",args=[],file="/home/pedro/brno/pedro/gdb/mygit/src/gdb/testsuite/gdb.ada/mi_catch_ex/foo.adb",fullname="/home/pedro/brno/pedro/gdb/mygit/src/gdb/testsuite/gdb.ada/mi_catch_ex/foo.adb",line="20"},thread-id="1",stopped-threads="all",core="5"
(gdb)
PASS: gdb.ada/mi_catch_ex.exp: continue until CE caught by all-exceptions catchpoint
The problem is that:
- MI prints the breakpoint hit twice: once on the MI stream;
another time on the console stream.
- After printing the Ada catchpoint hit, gdb selects a non-current
frame, from within the catchpoint's print_it routine.
So the second time the breakpoint is printed, the selected frame is no
longer the current frame, and then evaluating e.full_name in
ada_exception_name_addr fails.
This commit fixes the problem and enhances the gdb.ada/mi_catch_ex.exp
test to make sure the catchpoint hit is printed correctly on the
console stream too.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* ada-lang.c (ada_exception_name_addr_1): Add comment.
(print_it_exception): Select the current frame.
gdb/testsuite/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* gdb.ada/mi_catch_ex.exp (continue_to_exception): New procedure.
(top level): Use it instead of mi_execute_to.
Pedro Alves [Tue, 21 Jun 2016 00:11:43 +0000 (01:11 +0100)]
Prepare gdb.python/mi-py-events.exp for Python/MI in separate channels
Similarly to
5068630ad34dce5fefbe68d70d3a50cd8b92f71e
(gdb.python/py-events.exp and normal_stop observers ordering) [1],
this commit makes the gdb.python/py-mi-events.exp test not rely on
order in which MI and Python observers run, or even on where each
observer sends its output to.
This shows up as a problem when testing with MI running as a separate
terminal, for example, where Python event output and MI output go to
different channels, even. But in any case, relying on the order in
which observers run is always going to be fragile.
The fix is to save the string output in the handlers in some variables
and then having MI print them explicitly, instead of printing them
directly from the Python events.
Tested on x86_64 Fedora 23.
https://sourceware.org/ml/gdb-patches/2015-07/msg00290.html
gdb/testsuite/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* gdb.python/py-mi-events-gdb.py (stop_handler_str)
(cont_handler_str): New.
(signal_stop_handler): Set stop_handler_str instead of printing to
stdout.
(continue_handler): Set cont_handler_str instead of printing to
stdout.
* gdb.python/py-mi-events.exp: Ues mi_execute_to instead of
mi_send_resuming_command. Print stop_handler_str and
cont_handler_str instead of expecting the python events print
directly.
GDB Administrator [Tue, 21 Jun 2016 00:00:18 +0000 (00:00 +0000)]
Automatic date update in version.in
Maciej W. Rozycki [Mon, 20 Jun 2016 22:36:01 +0000 (23:36 +0100)]
MIPS/GAS/testsuite: Uniquely identify MIPS64r6 tests
gas/
* testsuite/gas/mips/r6-64-n32.d: Change the `name' tag.
* testsuite/gas/mips/r6-64-n64.d: Likewise.
Maciej W. Rozycki [Mon, 20 Jun 2016 22:39:20 +0000 (23:39 +0100)]
MIPS/GAS: Update comment on jump reloc conversion
Complement commit
44d3da233815 ("MIPS/GAS: Treat local jump relocs the
same no matter if REL or RELA") and update and clarify the comment on
jump reloc conversion.
gas/
* config/tc-mips.c (mips_fix_adjustable): Update comment on jump
reloc conversion.
H.J. Lu [Mon, 20 Jun 2016 19:28:20 +0000 (12:28 -0700)]
gold/x86: Handle output without PLT
If there is no PLT in output, return 0 for first_plt_entry_offset and
plt_entry_size.
PR gold/20245
* i386.cc (Target_i386::first_plt_entry_offset): Return 0 if
plt_ is NULL.
(Target_i386::plt_entry_size): Likewise.
(Target_x86_64<size>::first_plt_entry_offset): Likewise.
(Target_x86_64<size>::plt_entry_size): Likewise.
Vladimir Radosavljevic [Mon, 20 Jun 2016 19:10:53 +0000 (12:10 -0700)]
Add support for MIPS .rld_map section.
Includes DT_MIPS_RLD_MAP and DT_MIPS_RLD_MAP_REL dynamic tags and
__RLD_MAP symbol.
2016-06-20 Vladimir Radosavljevic <Vladimir.Radosavljevic@imgtec.com>
elfcpp/
* elfcpp.h (DT_MIPS_RLD_MAP_REL): New enum constant.
gold/
* mips.cc (Target_mips::Target_mips): Initialize rld_map_.
(Target_mips::rld_map_): New data member.
(Target_mips::do_finalize_sections): Add support for
DT_MIPS_RLD_MAP and DT_MIPS_RLD_MAP_REL dynamic tags,
.rld_map section, and __RLD_MAP symbol.
(Target_mips::do_dynamic_tag_custom_value): Add support for
DT_MIPS_RLD_MAP_REL dynamic tag.
* output.cc (Output_data_dynamic::get_entry_offset): New method
definition.
* output.h (Output_data_dynamic::get_entry_offset): New method
declaration.
Vladimir Radosavljevic [Mon, 20 Jun 2016 19:06:56 +0000 (12:06 -0700)]
Add unaligned check for R_MIPS_PC16.
gold/
* mips.cc (Mips_relocate_functions::relpc16): Add unaligned check.
Vladimir Radosavljevic [Mon, 20 Jun 2016 18:45:18 +0000 (11:45 -0700)]
Add support for Mips32r6 and Mips64r6.
elfcpp/
* mips.h (R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3,
R_MIPS_PC19_S2, R_MIPS_PCHI16, R_MIPS_PCLO16): New enums for
Mips32r6 and Mips64r6 relocations.
(r6_isa): New function.
gold/
* mips.cc (relocation_needs_la25_stub): Add support for relocs:
R_MIPS_PC21_S2 and R_MIPS_PC26_S2.
(hi16_reloc): Add support for R_MIPS_PCHI16 relocation.
(is_matching_lo16_reloc): Likewise.
(lo16_reloc): Add support for R_MIPS_PCLO16 relocation.
(Mips_output_data_plt::plt_entry_r6): New static data member for
R6 PLT entry.
(Target_mips::is_output_r6): New method.
(Target_mips::Mips_mach): Add new enum constants.
(Mips_relocate_functions::Status): Likewise.
(Mips_relocate_functions::pchi16_relocs): New static data member.
(Mips_relocate_functions::relpc21): New method.
(Mips_relocate_functions::relpc26): Likewise.
(Mips_relocate_functions::relpc18): Likewise.
(Mips_relocate_functions::relpc19): Likewise.
(Mips_relocate_functions::relpchi16): Likewise.
(Mips_relocate_functions::do_relpchi16): Likewise.
(Mips_relocate_functions::relpclo16): Likewise.
(Mips_output_data_plt::do_write): Add support for Mips r6 plt
entry.
(Target_mips::mips_32bit_flags): Add E_MIPS_ARCH_32R6 support.
(Target_mips::elf_mips_mach): Add E_MIPS_ARCH_32R6 and
E_MIPS_ARCH_64R6 support.
(Target_mips::update_abiflags_isa): Likewise.
(mips_get_size_for_reloc): Add support for relocs: R_MIPS_PCHI16,
R_MIPS_PCLO16, R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3 and
R_MIPS_PC19_S2.
(Target_mips::Scan::local): Add support for relocs: R_MIPS_PCHI16
and R_MIPS_PCLO16.
(Target_mips::Scan::global): Add support for relocs:
R_MIPS_PC21_S2 and R_MIPS_PC26_S2.
(Target_mips::Relocate::relocate): Call functions for resolving
Mips32r6 and Mips64r6 relocations, and print error message for
STATUS_PCREL_UNALIGNED.
(Target_mips::Scan::get_reference_flags): Add support for relocs:
R_MIPS_PCHI16, R_MIPS_PCLO16, R_MIPS_PC21_S2, R_MIPS_PC26_S2,
R_MIPS_PC18_S3 and R_MIPS_PC19_S2.
(Target_mips::elf_mips_mach_name): Add E_MIPS_ARCH_32R6 and
E_MIPS_ARCH_64R6 support.
H.J. Lu [Mon, 20 Jun 2016 12:10:29 +0000 (05:10 -0700)]
Use the IR symbol table for the IR input object
ELF linker shouldn't skip the IR object when searching the symbol table
of an archive element. If linker doesn't know if the object file is an
IR object, it should give LTO plugin a chance to get the correct symbol
table and use the IR symbol table if the input is an IR object.
bfd/
PR ld/18250
PR ld/20267
* elflink.c: Include plugin.h if BFD_SUPPORTS_PLUGINS is
defined.
(elf_link_is_defined_archive_symbol): Call
bfd_link_plugin_object_p on unknown plugin object and use the
IR symbol table if the input is an IR object.
* plugin.c (bfd_link_plugin_object_p): New function.
* plugin.h (bfd_link_plugin_object_p): New prototype.
ld/
PR ld/20267
* testsuite/ld-plugin/lto.exp (lto_link_tests): Add test for
PR ld/20267.
(lto_run_tests): Likewise.
* testsuite/ld-plugin/pr20267a.c: New file.
* testsuite/ld-plugin/pr20267b.c: Likewise.
Virendra Pathak [Mon, 20 Jun 2016 08:26:43 +0000 (09:26 +0100)]
Update the feature set for the Vulcan AArch64 cpu.
gas * config/tc-aarch64.c (aarch64_cpus): Update vulcan feature set.
Alan Modra [Mon, 20 Jun 2016 00:23:50 +0000 (09:53 +0930)]
PR ld/20276: Set non_ir_ref on common symbol
Also, don't check alignment on symbol from plugin dummy input.
bfd/
PR ld/20276
* elflink.c (elf_link_add_object_symbols): Don't check alignment
on symbol from plugin dummy input.
ld/
PR ld/20276
* plugin.c (plugin_notice): Set non_ir_ref on common symbols.
* testsuite/ld-plugin/lto.exp (lto_link_tests): Add test for
PR ld/20276.
(lto_run_tests): Likewise.
* testsuite/ld-plugin/pass.out: New file.
* testsuite/ld-plugin/pr20276a.c: Likewise.
* testsuite/ld-plugin/pr20276b.c: Likewise.
GDB Administrator [Mon, 20 Jun 2016 00:00:17 +0000 (00:00 +0000)]
Automatic date update in version.in
GDB Administrator [Sun, 19 Jun 2016 00:00:22 +0000 (00:00 +0000)]
Automatic date update in version.in
This page took 0.061174 seconds and 4 git commands to generate.