doc/
* gdb.texinfo (vAttach, vRun): Remove requirement of the stub
killing the inferior when it is already debugging a process.

gdbserver/
* server.c (handle_v_requests): When handling the vRun and vAttach
packets, if already debugging a process, don't kill it.  Return an
error instead.

* MAINTAINERS: Add Vladimir Prus as MI maintainer.

    * NEWS: Add entry describing Add support improvements.

PR other/12618
* testsuite/Makefile.in (mostlyclean): Remove any core file.

*** empty log message ***

daily update

2008-02-18  H.J. Lu  <hongjiu.lu@intel.com>

* cfi/cfi.exp (gas_x86_64_check): New.
(gas_x86_32_check): Likewise.
Run 32bit and 64bit tests for x86 targets if they are supportd.

* m68klinux-nat.c (getfpregs_supplies): Replace gdbarch_fp0_regnum by
M68K_FP0_REGNUM.

2008-02-18  H.J. Lu  <hongjiu.lu@intel.com>

* doc/c-i386.texi: Update -march= and .arch.

* sentinel-frame.c (sentinel_frame_prev_register): Do not call
register_offset_hack anymore.

* regcache.{c,h} (register_offset_hack): Remove.

* hppa-tdep.h (find_global_pointer): Add gdbarch as parameter.

* hppa-hpux-tdep.c (hppa32_hpux_find_global_pointer): Likewise. Replace
current_gdbarch by gdbarch.
(hppa64_hpux_find_global_pointer): Likewise.
* hppa-tdep.c (hppa_find_global_pointer): Likewise.
(hppa32_push_dummy_call, hppa64_push_dummy_call): Update call for
find_global_pointer.

* hppabsd-tdep.c (hppabsd_find_global_pointer): Add gdbarch as
parameter.
* hppa-linux-tdep.c (hppa_linux_find_global_pointer): Likewise.

* hppa-linux-nat.c (hppa_linux_register_addr): Use ARRAY_SIZE instead
of gdbarch_num_regs.

* hppa-hpux-tdep.c (hppa_hpux_sr_for_addr): Add gdbarch as parameter and
replace current_gdbarch by gdbarch.
(hppa_hpux_push_dummy_code): Update call for hppa_hpux_sr_for_addr.

    * scripttempl/armbpabi.sc (ENTRY): Do not define when performing a
        relocatable link.
        * scripttempl/elf32cr16.sc: Likewise.
        * scripttempl/elf32cr16c.sc: Likewise.
        * scripttempl/elf32crx.sc: Likewise.
        * scripttempl/elf32sh-symbian.sc: Likewise.
        * scripttempl/elf_chaos.sc: Likewise.
        * scripttempl/elfd10v.sc: Likewise.
        * scripttempl/elfi370.sc: Likewise.
        * scripttempl/elfm68hc11.sc: Likewise.
        * scripttempl/elfm68hc12.sc: Likewise.
        * scripttempl/ip2k.sc: Likewise.
        * scripttempl/iq2000.sc: Likewise.
        * scripttempl/mep.sc: Likewise.
        * scripttempl/v850.sc: Likewise.
        * scripttempl/xstormy16.sc: Likewise.

    * cr16.h (cr16_num_optab): Declared.
        * cr16-opc.c  (cr16_num_optab): Defined

* lib/ld-lib.exp (run_dump_test): Don't apply prune_warnings
for tool invocations where warnings or errors can be matched.

* rs6000-nat.c (exec_one_dummy_insn, regmap): Add gdbarch as parameter
and replace current_gdbarch by gdbarch.

(store_register): Update call for exec_one_dummy_insn.
(fetch_register, store_register): Update call of regmap.

* ppcnbsd-nat.c (getregs_supplies, getfpregs_supplies): Add gdbarch as
parameter and replace current_gdbarch by gdbarch.

(ppcnbsd_store_inferior_registers): Use get_regcache_arch to get at
the current architecture. Update call for getregs_supplies and
getfpregs_supplies.
(ppcnbsd_fetch_inferior_registers): Likewise.

* ppcobsd-nat.c (getfpregs_supplies): Add gdbarch as parameter and
replace current_gdbarch by gdbarch.
(ppcobsd_fetch_registers, ppcobsd_store_registers): Use
get_regcache_arch to get at the current architecture. Update call for
getfpregs_supplies.

* arch-utils.c (gdbarch_from_bfd): Remove unnecessary {old,new}_gdbarch
variables.

    * config/tc-mn10300.c (has_known_symbol_location): New function.
        Do not regard weak symbols as having a known location.
        (md_estimate_size_before_relax): Use new function.
        (md_pcrel_from): Do not compute a pcrel against a weak symbol.

gas/
2008-02-18  Jan Beulich  <jbeulich@novell.com>

* config/tc-i386.c (match_template): Disallow 'l' suffix when
currently selected CPU has no 32-bit support.
(parse_real_register): Do not return registers not available on
currently selected CPU.

gas/testsuite/
2008-02-18  Jan Beulich  <jbeulich@novell.com>

* gas/i386/att-regs.s, gas/i386/att-regs.d,
gas/i386/intel-regs.s, gas/i386/intel-regs.d: New.
* gas/i386/i386.exp: Run new tests.

*** empty log message ***

* elf.c (swap_out_syms): Avoid preprocessing directive within
macro arg.

daily update

* server.c (handle_query): Correct length check.

* elf.c (assign_file_positions_for_load_sections): Set the type of
PT_NOTE sections to SHT_NOTE.

2008-02-16  H.J. Lu  <hongjiu.lu@intel.com>

* config/tc-i386.c (process_immext): Fix format.

*** empty log message ***

* simple.c (bfd_simple_get_relocated_section_contents): Set
link_info.output_bfd.

daily update

gas/

2008-02-16  H.J. Lu  <hongjiu.lu@intel.com>

* config/tc-i386.c (inoutportreg): New.
(process_immext): New.
(md_assemble): Use it.
(update_imm): Use imm16 and imm32s.
(i386_att_operand): Use inoutportreg.

opcodes/

2008-02-16  H.J. Lu  <hongjiu.lu@intel.com>

* i386-gen.c  (operand_type_init): Add OPERAND_TYPE_INOUTPORTREG.
* i386-init.h: Regenerated.

2008-02-16  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>

PR libgcj/33085
* libtool.m4 (_LT_COMPILER_PIC) [ mingw, cygwin ] <GCJ>:
Do not use -DDLL_EXPORT.  Backport from upstream.

* dwarf2.c (find_line): Don't trust debug information after an
unparseable compilation unit.

PR ld/5761
* ldexp.c (fold_name <LOADADDR>): Check result of evaluating
load_base before calling make_abs.

*** empty log message ***

daily update

PR 5765
* section.c (SEC_LINK_DUPLICATES): Correct.  Renumber following flags.
* bfd-in2.h: Regenerate.

Update attribution for PR 5713 patch.

    PR binutils/5713
        * strings.c (integer_arg): Delete function.
        (string_min): Initialise to 4.
        (main): Use strtoul to parse integer arguments.
        Move check for an invalid string length to after all the arguments
        have been parsed.
        (usage): Use indentation to indicate that -<n> is a another form
        of the --bytes= command line option.

* emultempl/alphaelf.em (alpha_after_open): Use elf_object_id.
* emultempl/hppaelf.em (hppaelf_create_output_section_statements):
Likewise.
* emultempl/ppc64elf.em (ppc_create_output_section_statements):
Likewise.
* emultempl/ppc32elf.em (is_ppc_elf32_vec): Delete.  Replace all
uses with..
(is_ppc_elf): ..this new macro.

* elf-bfd.h (enum elf_object_id): Add HPPA_ELF_TDATA.
* elf.c (bfd_elf_allocate_object): Don't check for already allocated
tdata.
* elf32-hppa.c (elf32_hppa_mkobject): New function.
(bfd_elf32_mkobject): Define.
* elf32-ppc.c (is_ppc_elf_target): Delete.  Replace all uses with..
(is_ppc_elf): ..this new macro.
* elf64-ppc.c (is_ppc64_elf_target): Delete.  Replace all uses with..
(is_ppc64_elf): ..this new macro.

* mips-linux-tdep.c (mips_linux_init_abi): Remove internal error.

include/
* bfdlink.h (struct bfd_link_hash_table): Delete creator field.
(struct bfd_link_info): Add output_bfd.
bfd/
* elflink.c: Replace all accesses to hash->creator field with
output_bfd->xvec.
* cofflink.c: Likewise.
* coff-h8300.c: Likewise.
* ecoff.c: Likewise.
* elf32-m68hc1x.c: Likewise.
* elf32-ppc.c: Likewise.
* elf64-alpha.c: Likewise.
* elf64-ppc.c: Likewise.
* elf64-sparc.c: Likewise.
* elfxx-mips.c: Likewise.
* i386linux.c: Likewise.
* m68klinux.c: Likewise.
* sparclinux.c: Likewise.
* sunos.c: Likewise.
* xcofflink.c: Likewise.
* linker.c: Likewise.
(_bfd_link_hash_table_init): Don't store creator.
ld/
* ldmain.h (output_bfd): Delete.
* ldmain.c (output_bfd): Delete.
Replace all occurrences of output_bfd with link_info.output_bfd.
* ldcref.c: Likewise.
* ldctor.c: Likewise.
* ldemul.c: Likewise.
* ldexp.c: Likewise.
* ldfile.c: Likewise.
* ldlang.c: Likewise.
* ldmisc.c: Likewise.
* ldwrite.c: Likewise.
* pe-dll.c: Likewise.
* emultempl/aix.em: Likewise.
* emultempl/alphaelf.em: Likewise.
* emultempl/armcoff.em: Likewise.
* emultempl/armelf.em: Likewise.
* emultempl/avrelf.em: Likewise.
* emultempl/beos.em: Likewise.
* emultempl/elf-generic.em: Likewise.
* emultempl/elf32.em: Likewise.
* emultempl/gld960.em: Likewise.
* emultempl/hppaelf.em: Likewise.
* emultempl/irix.em: Likewise.
* emultempl/linux.em: Likewise.
* emultempl/lnk960.em: Likewise.
* emultempl/m68hc1xelf.em: Likewise.
* emultempl/mmix-elfnmmo.em: Likewise.
* emultempl/mmo.em: Likewise.
* emultempl/pe.em: Likewise.
* emultempl/pep.em: Likewise.
* emultempl/ppc32elf.em: Likewise.
* emultempl/ppc64elf.em: Likewise.
* emultempl/scoreelf.em: Likewise.
* emultempl/sh64elf.em: Likewise.
* emultempl/spuelf.em: Likewise.
* emultempl/sunos.em: Likewise.
* emultempl/vanilla.em: Likewise.
* emultempl/vxworks.em: Likewise.
* emultempl/xtensaelf.em: Likewise.
* emultempl/z80.em: Likewise.
* ldlang.c (open_output): Don't return output, instead write
link_info_output_bfd directly.
* emultempl/alphaelf.em: Replace occurrences of link_info.hash->creator
with link_info.output_bfd->xvec.
* emultempl/hppaelf.em: Likewise.
* emultempl/ppc32elf.em: Likewise.
* emultempl/ppc64elf.em: Likewise.
* emultempl/spuelf.em: Likewise.

*** empty log message ***

daily update

2008-02-14  H.J. Lu  <hongjiu.lu@intel.com>

* config/tc-i386.c (operand_type_all_zero): New.
(operand_type_set): Likewise.
(operand_type_equal): Likewise.
(cpu_flags_all_zero): Likewise.
(cpu_flags_set): Likewise.
(cpu_flags_equal): Likewise.
(UINTS_ALL_ZERO): Removed.
(UINTS_SET): Likewise.
(UINTS_CLEAR): Likewise.
(UINTS_EQUAL): Likewise.
(cpu_flags_match): Updated.
(smallest_imm_type): Likewise.
(set_cpu_arch): Likewise.
(md_assemble): Likewise.
(optimize_imm): Likewise.
(match_template): Likewise.
(process_suffix): Likewise.
(update_imm): Likewise.
(process_drex): Likewise.
(process_operands): Likewise.
(build_modrm_byte): Likewise.
(i386_immediate): Likewise.
(i386_displacement): Likewise.
(i386_att_operand): Likewise.
(parse_real_register): Likewise.
(md_parse_option): Likewise.
(i386_target_format): Likewise.

* win32-low.c (do_initial_child_stuff): Add process handle
parameter.  Set current_process_handle and current_process_id from the
parameters. Clear globals.
(win32_create_inferior): Don't set current_process_handle and
current_process_id here.  Instead pass them on the call to
do_initial_child_stuff.
(win32_attach): Likewise.
(win32_clear_inferiors): New.
(win32_kill): Don't close the current process handle or the
current thread handle here.  Instead call win32_clear_inferiors.
(win32_detach): Don't open a new handle to the process.  Call
win32_clear_inferiors.
(win32_join): Don't rely on current_process_handle; open a new
handle using the process id.
(win32_wait): Call win32_clear_inferiors when the inferior process
has exited.

2008-02-14  H.J. Lu  <hongjiu.lu@intel.com>

* ld-shared/sh1.c (shlib_overriddencall2): Moved to ...
* ld-shared/sh2.c (shlib_overriddencall2): Here.  New.

* NEWS: Mention pending breakpints in MI

* server.c (monitor_show_help): Add "exit".

    PR gas/5712
        * config/tc-arm.c (s_arm_unwind_save): Advance the input line
        pointer past the comma after parsing a floating point register
        name.

        * gas/arm/fp-save.s: New test.
        * gas/arm/fp-save.d: Expected disassembly.

    * efi-rtdrv-ia32.c: New file.
        * efi-bsdrv-ia32.c: New file.
        * efi-rtdrv-ia64.c: New file.
        * efi-bsdrv-ia64.c: New file.
        * efi-rtdrv-x86_64.c: New file.
        * efi-bsdrv-x86_64.c: New file.
        * peicode.h (pe_bfd_object_p): Add support for boot service and
        runtime service drivers.
        * libpei.h: Add macros for EFI formats, and rename the efi application
        format macros to disambiguate.
        * targets.c: Add bfd_target _vec externs.
        (_bfd_tar): Add EFI _vec entries.
        * config.bfd: Add EFI vectors into the selection routines.
        * configure.in: add EFI _vec entries.
        * configure: Regenerate.
        * Makefile.am: Add EFI files.
        * Makefile.in: Regenerate.

    PR gas/2626

        * avr.h (AVR_ISA_2xxe): Define.

        * config/tc-avr.c (mcu_types): Change the ISA tyoe of the attiny26
        to AVR_ISA_2xxe.
        (avr_operand): Disallow post-increment addressing in the lpm
        instruction for the attiny26.

* dwarf1.c (struct dwarf1_debug): Add syms member.
(alloc_dwarf1_unit, alloc_dwarf1_func): Check for out of memory.
(parse_line_table, _bfd_dwarf1_find_nearest_line): Relocate
section contents, check for out of memory.

* dwarf1.c (struct dwarf1_debug): Change data pointers to bfd_byte.
(parse_die): Change data pointers to bfd_byte.
(parse_line_table, parse_functions_in_unit): Likewise.

Import this patch from gcc:
2008-01-24  David Edelsohn  <edelsohn@gnu.org>

            * libtool.m4: Backport AIX 6 support from ToT Libtool.

PR binutils/5524
   * configure.in (SHARED_LIBADD): Select the correct host specific
   file extension for shared libraries.
   * configure: Regenerate.

* elflink.c (compute_bucket_count): Warning fixes.

* Makefile.in (ALL_TARGET_OBS): Remove dependency to xtensa-linux-nat.o.

Align FDE and CIE lengths as needed.

Set load address for orphan sections.

*** empty log message ***

daily update

Implement -Tdata and -Tbss.

Implement remaining linker script functions.

* gas/mips/branch-misc-2pic-64.d (#name): Have a unique name
different from the branch-misc-2-64.d test.

gas/
2008-02-13  Jan Beulich  <jbeulich@novell.com>

* config/tc-i386.c (parse_real_register): Don't return 'FLAT'
if not in Intel mode.
(i386_intel_operand): Ignore segment overrides in immediate and
offset operands.
(intel_e11): Range-check i.mem_operands before use as array
index. Filter out FLAT for uses other than as segment override.
(intel_get_token): Remove broken promotion of "FLAT:" to mean
"offset FLAT:".

gas/testsuite/
2008-02-13  Jan Beulich  <jbeulich@novell.com>

* gas/i386/intelok.s: Replace invalid offset expression with
valid ones.
* gas/i386/x86_64.s: Likewise.

opcodes/
2008-02-13  Jan Beulich  <jbeulich@novell.com>

* i386-opc.h (RegFlat): New.
* i386-reg.tbl (flat): Add.
* i386-tbl.h: Re-generate.

gas/
2008-02-13  Jan Beulich  <jbeulich@novell.com>

* config/tc-i386.c (intel_e09): Also special-case 'bound'.

gas/testsuite/
2008-02-13  Jan Beulich  <jbeulich@novell.com>

* gas/i386/intelbad.s, gas/i386/intelok.s: Add 'bound' tests.
* gas/i386/intelbad.l, gas/i386/intelok.l, gas/i386/intelok.e,
gas/i386/opcode-intel.d: Adjust.

opcodes/
2008-02-13  Jan Beulich  <jbeulich@novell.com>

* i386-dis.c (a_mode): New.
(cond_jump_mode): Adjust.
(Ma): Change to a_mode.
(intel_operand_size): Handle a_mode.
* i386-opc.tbl: Allow Dword and Qword for bound.
* i386-tbl.h: Re-generate.

gas/
2008-02-13  Jan Beulich  <jbeulich@novell.com>

* config/tc-i386.c (allow_pseudo_reg): New.
(parse_real_register): Check for NULL just once. Allow all
register table entries when allow_pseudo_reg is non-zero.
Don't allow any registers without type when allow_pseudo_reg
is zero.
(tc_x86_regname_to_dw2regnum): Replace with ...
(tc_x86_parse_to_dw2regnum): ... this.
(tc_x86_frame_initial_instructions): Adjust for above change.
* config/tc-i386.h (tc_regname_to_dw2regnum): Remove.
(tc_parse_to_dw2regnum): New.
(tc_x86_regname_to_dw2regnum): Replace with ...
(tc_x86_parse_to_dw2regnum): ... this.
* dw2gencfi.c (tc_parse_to_dw2regnum): New, broken out of ...
(cfi_parse_reg): ... this. Use tc_parse_to_dw2regnum. Adjust
error handling.

gas/testsuite/
2008-02-13  Jan Beulich  <jbeulich@novell.com>

* gas/cfi/cfi-i386.s: Add code testing use of all registers.
Fix a few comments.
* gas/cfi/cfi-x86_64.s: Likewise.
* gas/cfi/cfi-i386.d, gas/cfi/cfi-x86_64.d: Adjust.

opcodes/
2008-02-13  Jan Beulich  <jbeulich@novell.com>

* i386-gen.c (process_i386_registers): Process new fields.
* i386-opc.h (reg_entry): Shrink reg_flags and reg_num to
unsigned char. Add dw2_regnum and Dw2Inval.
* i386-reg.tbl: Provide initializers for dw2_regnum. Add pseudo
register names.
* i386-tbl.h: Re-generate.

Add script to build and test GDB using enable-targets=all.

* gdb_buildall.sh: New file.

doc/
        * gdbint.texinfo (Build Script): New section. Mention new build script
        gdb_buildall.sh.

Support selecting target by name.

Assignments in linker scripts override definitions from object files.

Implement LOADADDR and SIZEOF.

*** empty log message ***

daily update

* elf32-iq2000.c (iq2000_elf_relocate_section): Adjust addend of
relocation pointing to local symbol in merged section.
* elf32-iq2000.c (iq2000_elf_relocate_offset16): New.
(iq2000_elf_relocate_section): Call it.

2002-02-12  H.J. Lu  <hongjiu.lu@intel.com>

* gas/i386/i386.exp: Run x86-64-arch-2 instead of
x86-64-arch-10.

* gas/i386/x86-64-arch-10.d: Removed.

* gas/i386/x86-64-arch-2.d: New.
* gas/i386/x86-64-arch-2.s: Likewise.

Correct last 2 ChangeLog entries.

2008-02-12  H.J. Lu  <hongjiu.lu@intel.com>

* gas/i386/x86-64-xsave.d: Remove prefix.

* dlltool.c (mcore_elf_cache_filename): Add a const qualifier to
  the argument.
  (scan_obj_filename): Do not drop the const qualifier when calling
  mcore_elf_cache_filename.
  (struct fname_cache): Add const qualifier to filename field.

PR ld/5692
   * elf-bfd.h (enum elf_object_id): New enum, used to identify
   target specific extensions to the elf_obj_tdata structure.
   (struct elf_obj_tdata): New field 'object_id'.
   (elf_object_id, elf_program_header_size, elf_symtab_hdr): New
   macros for accessing fields in the elf_obj_tdata structure.
   (bfd_elf_mkobject): Rename to bfd_elf_make_generic_object.
   (bfd_elf_allocate_object): New function.
   * elf.c (bfd_elf_mkobject): Rename to bfd_elf_make_generic_object
   and implement by calling bfd_elf_allocate_object.
   (bfd_elf_allocate_object): New function: Allocates an
   elf_obj_tdata structure, possibly with a target specific
   extension.
   * elfxx-target.h (bfd_elfNN_mkobject): Use
   bfd_elf_make_generic_object as the default value.
   * elf32-arm.c (elf32_arm_obj_tdata): Rename to elf_arm_obj_tdata
   for consistency with other, similar structures.
   (is_arm_elf): New macro.  Checks a BFD to make sure that is an ARM
   ELF bfd.
   (elf32_arm_mkobject): Call bfd_elf_allocate_object.
   (bfd_elf32_arm_vfp11_erratum_scan): Use is_arm_elf macro to check
   the bfd being processed.
   (bfd_elf32_arm_vfp11_fix_veneer_locations): Likewise.
   (bfd_elf32_arm_set_target_relocs): Likewise.
   (bfd_elf32_arm_final_link_relocate): Likewise.
   (bfd_elf32_arm_copy_private_bfd_data): Likewise.
   (bfd_elf32_arm_merge_eabi_attributes): Likewise.
   (bfd_elf32_arm_merge_private_bfd_data): Likewise.
   (bfd_elf32_arm_check_relocs): Likewise.
   (bfd_elf32_arm_gc_mark_extra_sections): Likewise.
   (bfd_elf32_arm_size_dynamic_sections): Likewise.
   (bfd_elf32_arm_process_before_allocation): Use elf_symtab_hdr.
   (bfd_elf32_arm_init_maps): Likewise.
   (bfd_elf32_arm_final_link_relocate): Likewise.
   (bfd_elf32_arm_relocate_section): Likewise.
   (bfd_elf32_arm_gc_sweep_hook): Likewise.
   (bfd_elf32_arm_check_relocs): Likewise.
   (bfd_elf32_arm_size_dynamic_sections): Likewise.
   * elf32-i386.c (elf_i386_mkobject): Call bfd_elf_allocate_object.
   (is_i386_elf): New macro.  Checks a BFD to make sure that is an x86
   ELF bfd.
   (elf_i386_check_relocs): Use is_i386_elf macro to check    the bfd
   being processed.
   (elf_i386_size_dynamic_sections): Likewise.
   (elf_i386_relocate_section): Likewise.
   (elf_i386_check_relocs): Use elf_symtab_hdr.
   (elf_i386_gc_sweep_hook): Likewise.
   (elf_i386_size_dynamic_sections): Likewise.
   (elf_i386_relocate_section): Likewise.
   * elf32-ppc.c (ppc_elf_mkobject): Call bfd_elf_allocate_object.
   (elf_create_pointer_linker_section): Use is_ppc_elf_target to
   verify that the bfd before accessing target specific fields.
   (ppc_elf_check_relocs): Likewise.
   (elf_finish_pointer_linker_section): Likewise.
   (elf_create_pointer_linker_section): Use elf_symtab_hdr.
   (ppc_elf_check_relocs): Likewise.
   (ppc_elf_gc_sweep_hook): Likewise.
   (ppc_elf_tls_optimize): Likewise.
   (ppc_elf_size_dynamic_sections): Likewise.
   (ppc_elf_relax_section): Likewise.
   (ppc_elf_relocate_section): Likewise.
   * elf32-s390.c (struct elf_s390_obj_tdata): Add a comment
   reminding programmers to keep this structure in sync with the one
   defined in elf64-s390.c.
   (elf_s390_mkobject): Call bfd_elf_allocate_object.
   (is_s390_elf): New macro.  Checks a BFD to make sure that is an s390
   ELF bfd.
   (elf_s390_check_relocs): Use is_s390_elf macro to check    the bfd
   being processed.
   (elf_s390_size_dynamic_sections): Likewise.
   (elf_s390_relocate_section): Likewise.
   (elf_s390_check_relocs): Use elf_symtab_hdr.
   (elf_s390_gc_sweep_hook): Likewise.
   (elf_s390_size_dynamic_sections): Likewise.
   (elf_s390_relocate_section): Likewise.
   * elf32-sh.c (sh_elf_mkobject): Call bfd_elf_allocate_object.
   (is_sh_elf): New macro.  Checks a BFD to make sure that is an SH
   ELF bfd.
   (sh_elf_size_dynamic_sections): Use is_sh_elf macro to check the
   bfd being processed.
   (sh_elf_relocate_section): Likewise.
   (sh_elf_check_relocs): Likewise.
   (sh_elf_copy_private_data): Likewise.
   (sh_elf_relax_section): Use elf_symtab_hdr.
   (sh_elf_size_dynamic_sections): Likewise.
   (sh_elf_relocate_section): Likewise.
   (sh_elf_get_relocated_section_contents): Likewise.
   (sh_elf_gc_sweep_hook): Likewise.
   (sh_elf_check_relocs): Likewise.
   * elf64-alpha.c (elf64_alpha_mkobject): Call bfd_elf_allocate_object.
   (is_alpha_elf): New macro.  Checks a BFD to make sure that is an
   Alpha ELF bfd.
   (elf64_alpha_create_got_section): Use is_alpha_elf macro to check
   the bfd being processed.
   (elf64_alpha_create_dynamic_section): Likewise.
   (elf64_alpha_check_relocs): Likewise.
   (elf64_alpha_size_got_sections): Likewise.
   (elf64_alpha_relax_section): Likewise.
   (elf64_alpha_relocate_section): Likewise.
   (elf64_alpha_final_link): Likewise.
   (elf64_alpha_check_relocs): Use elf_symtab_hdr.
   (elf64_alpha_relax_section): Likewise.
   (elf64_alpha_relocate_section_r): Likewise.
   (elf64_alpha_relocate_section): Likewise.
   * elf64-ppc.c (ppc64_elf_mkobject): Call bfd_elf_allocate_object.
   (ppc64_elf_check_relocs): Use is_ppc64_elf_target to check the bfd
   being processed.
   (opd_entry_value): Likewise.
   (allocate_dynrelocs): Likewise.
   (ppc64_elf_relocate_section): Likewise.
   (ppc64_elf_check_relocs): Use elf_symtab_hdr.
   (opd_entry_value): Likewise.
   (ppc64_elf_gc_sweep_hook): Likewise.
   (get_sym_h): Likewise.
   (ppc64_elf_edit_opd): Likewise.
   (ppc64_elf_tls_optimize): Likewise.
   (ppc64_elf_edit_toc): Likewise.
   (ppc64_elf_size_dynamic_sections): Likewise.
   (toc_adjusting_stub_needed): Likewise.
   (ppc64_elf_size_stubs): Likewise.
   (ppc64_elf_relocate_section): Likewise.
   * elf64-s390.c (struct elf_s390_obj_tdata): Add a comment
   reminding programmers to keep this structure in sync with the one
   defined in elf32-s390.c.
   (elf_s390_mkobject): Call bfd_elf_allocate_object.
   (is_s390_elf): New macro.  Checks a BFD to make sure that is an s390
   ELF bfd.
   (elf_s390_check_relocs): Use is_s390_elf macro to check    the bfd
   being processed.
   (elf_s390_size_dynamic_sections): Likewise.
   (elf_s390_relocate_section): Likewise.
   (elf_s390_check_relocs): Use elf_symtab_hdr.
   (elf_s390_gc_sweep_hook): Likewise.
   (elf_s390_size_dynamic_sections): Likewise.
   (elf_s390_relocate_section): Likewise.
   * elf64-x86_64.c (elf64_x86_64_mkobject): Call bfd_elf_allocate_object.
   (is_x86_64_elf): New macro.  Checks a BFD to make sure that is an
   x86_64 ELF bfd.
   (elf64_x86_64_check_relocs): Use is_x86_64_elf macro to check the bfd
   being processed.
   (elf64_x86_64_size_dynamic_sections): Likewise.
   (elf64_x86_64_relocate_section): Likewise.
   (elf64_x86_64_check_relocs): Use elf_symtab_hdr.
   (elf64_x86_64_gc_sweep_hook): Likewise.
   (elf64_x86_64_size_dynamic_sections): Likewise.
   (elf64_x86_64_relocate_section): Likewise.
   * elfxx-sparc.c (_bfd_sparc_elf_mkobject): Call bfd_elf_allocate_object.
   (is_sparc_elf): New macro.  Checks a BFD to make sure that is a Sparc
   ELF bfd.
   (_bfd_sparc_elf_check_relocs): Use is_sparc_elf macro to check the
   bfd being processed.
   (_bfd_sparc_elf_gc_sweep_hook): Likewise.
   (_bfd_sparc_elf_size_dynamic_sections): Likewise.
   (_bfd_sparc_elf_check_relocs): Use elf_symtab_hdr.
   (_bfd_sparc_elf_gc_sweep_hook): Likewise.
   (_bfd_sparc_elf_size_dynamic_sections): Likewise.
   (_bfd_sparc_elf_relocate_section): Likewise.

* config/tc-tic4x.c (tic4x_insn_insert): Add const qualifier to
  argument.
  (tic4x_insn_add): Likewise.
  (md_begin): Drop cast that was discarding a const qualifier.
  * config/tc-d30v.c (get_reloc): Add const qualifier to op
  argument.
  (build_insn): Drop cast that was discarding a const qualifier.

gas/

2008-02-11  H.J. Lu  <hongjiu.lu@intel.com>

* config/tc-i386.c (cpu_arch): Add .xsave.
(md_show_usage): Add .xsave.

* doc/c-i386.texi: Add xsave to -march=.

gas/testsuite/

2008-02-11  H.J. Lu  <hongjiu.lu@intel.com>

* gas/i386/arch-10.s: Add xgetbv.

* gas/i386/arch-10.d: Updated.
* gas/i386/arch-10-1.l: Likewise.
* gas/i386/arch-10-2.l: Likewise.
* gas/i386/arch-10-3.l: Likewise.
* gas/i386/arch-10-4.l: Likewise.
* gas/i386/x86-64-arch-10.d: Likewise.

opcodes/

2008-02-11  H.J. Lu  <hongjiu.lu@intel.com>

* i386-gen.c  (cpu_flag_init): Add CPU_XSAVE_FLAGS.
* i386-init.h: Updated.

Up version to 1.1, as the 1.1 binary was pushed to users today.

missed from last commit

Support dynamic relocations against local section symbols.

PR 5755
* arange-set.c: Delete.
* arange-set.h: Delete.
* dwarf2.c: Revert 2007-09-21 changes.
* Makefile.am: Likewise.
* Makefile.in: Regenerate.
* po/SRC-POTFILES.in: Regenerate.

Set TEXTREL correctly when using a SECTIONS clause.

Pass down alignment when adding input section to orphan section.

Force different sections to different pages for better results on
x86_64 Linux.

Fix precedence error, avoid signed/unsignd warning.

gas/testsuite/

2002-02-11  H.J. Lu  <hongjiu.lu@intel.com>

* gas/i386/i386.exp: Run xsave, xsave-intel, x86-64-xsave
and x86-64-xsave-intel.

* gas/i386/x86-64-xsave-intel.d: New file.
* gas/i386/x86-64-xsave.d: Likewise.
* gas/i386/x86-64-xsave.s: Likewise.
* gas/i386/xsave-intel.d: Likewise.
* gas/i386/xsave.d: Likewise.
* gas/i386/xsave.s: Likewise.

opcodes/

2008-02-11  H.J. Lu  <hongjiu.lu@intel.com>

* i386-gen.c (cpu_flags): Add CpuXsave.

* i386-opc.h (CpuXsave): New.
(Cpu64): Updated.
(i386_cpu_flags): Add cpuxsave.

* i386-dis.c (MOD_0FAE_REG_4): New.
(RM_0F01_REG_2): Likewise.
(MOD_0FAE_REG_5): Updated.
(RM_0F01_REG_3): Likewise.
(reg_table): Use MOD_0FAE_REG_4.
(mod_table): Use RM_0F01_REG_2.  Add MOD_0FAE_REG_4.  Updated
for xrstor.
(rm_table): Add RM_0F01_REG_2.

* i386-opc.tbl: Add xsave, xrstor, xgetbv and xsetbv.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.

*** empty log message ***

daily update

Fix formatting of most recent entry.

* elf32-bfin.c (bfinfdpic_relocate_section): Take more care not to
emit invalid relocs or rofixup entries for deleted .eh_frame entries.

2008-02-11  Maxim Grigoriev  <maxim2405@gmail.com>

* gdbserver/Makefile.in (SFILES): Add linux-xtensa-low.c.
(clean): Add reg-xtensa.c.
(linux-xtensa-low.o, reg-xtensa.o, reg-xtensa.c): New dependencies.
* gdbserver/configure.srv (xtensa*-*-linux*) New target.
* gdbserver/linux-xtensa-low.c: New.
* gdbserver/xtensa-xtregs.c: New.

2008-02-11  Maxim Grigoriev  <maxim2405@gmail.com>

* NEWS (New native configurations): Xtensa GNU/Linux.
(New targets): Xtensa GNU/Linux.
* Makefile.in (ALL_TARGET_OBS): Add xtensa-linux-nat.o and
xtensa-linux-tdep.o
(ALLDEPFILES): Add xtensa-linux-tdep.c and xtensa-linux-nat.c
(xtensa-linux-nat.o, xtensa-linux-tdep.o): New dependencies.
* configure.tgt (xtensa*-*-linux*): New entry.
* xtensa-config.c (xtensa_tdep): New variable.
(xtensa_config_byte_order, xtensa_config_tdep): Removed.
(rmap): Change format based on new macro XTREG.
(XTENSA_CONFIG_INSTANTIATE): Use new macro defined in xtensa-tdep.h.
* xtensa-linux-nat.c: New.
* xtensa-linux-tdep.c: New.
* xtensa-xtregs.c: New.
* xtensa-tdep.h (xtensa_elf_gregset_t): Update.
(XTENSA_ELF_NGREG, XTREG, XTREG_END, XTENSA_GDBARCH_TDEP_INSTANTIATE)
(XCHAL_NUM_CONTEXTS, XCHAL_HAVE_EXCEPTIONS): New macros.
(xtensa_register_t): New field coprocessor.
(XTENSA_REGISTER_FLAGS_PRIVILEGED): Name spelling corrected.
* xtensa-tdep.c (xtensa_config_tdep, xtensa_config_byte_order): Removed.
(xtensa_pseudo_register_read, xtensa_pseudo_register_write):
Update to handle privileged registers.
(xtensa_supply_gregset) Remove exccause and excvaddr registers.
(xtensa_push_dummy_call): Set windowstart register correctly.
(call0_analyze_prologue): Initialize xtensa_default_isa.
(xtensa_derive_tdep): New.
(xtensa_gdbarch_init): Get rid of xtensa_config_byte_order and
xtensa_config_tdep, use XCHAL_HAVE_BE and xtensa_tdep instead.
Call xtensa_derive_tdep().
* config/xtensa/linux.mh: New.
* regformats/reg-xtensa.dat: New.

* xtensa-config.h (XCHAL_HAVE_THREADPTR): Redefine to zero.
(XCHAL_NUM_AREGS, XCHAL_MAX_INSTRUCTION_SIZE): New.

* elf32-bfin.c (bfin_relocate_section): Set up dynobj before using it
if necessary.
(elf32_bfin_merge_private_bfd_data): Simplify, and ensure object type
mismatches are detected.

opcodes/
2008-02-11  Jan Beulich  <jbeulich@novell.com>
* i386-opc.tbl: Remove Disp32S from CpuNo64 opcodes. Remove
Disp16 from Cpu64 non-jump opcodes (including loop and j?cxz).
* i386-tbl.h: Re-generate.

* cache.c (cache_bread): Set bfd_error_file_truncated if EOF
was reached.
* srec.c (srec_scan): Calculate the checksum.  Complain on mismatch.

*** empty log message ***

daily update