Chuck Lever [Tue, 11 Sep 2007 22:01:10 +0000 (18:01 -0400)]
NFS: Convert printk's to dprintk's in fs/nfs/nfs?xdr.c
Due to recent edict to replace or remove printk's that can be triggered en
masse by remote misbehavior. Left a few that only occur just before a BUG.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Tue, 11 Sep 2007 22:01:04 +0000 (18:01 -0400)]
NFS: Add new 'mountaddr=' mount option
I got the 'mounthost=' option wrong - it shouldn't look for an address
value, but rather a hostname value. However, the in-kernel mount client
and NFS client cannot resolve a hostname by themselves; they rely on
user-land to pass in the resolved address.
Create a new mount option that does take an address so that the mount
program's address can be passed in. The mount hostname is now ignored
by the kernel.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
James Lentini [Mon, 24 Sep 2007 21:32:49 +0000 (17:32 -0400)]
[NFS] [PATCH] NFS: initialize default port in kernel mount client
If no mount server port number is specified, the previous change to the
kernel mount client inadvertently allows the NFS server's port number to be
the used as the mount server's port number. If the user specifies an NFS
server port (-o port=x), the mount will fail.
The fix below sets the mount server's port to 0 if no mount server
port is specified by the user.
Signed-off-by: James Lentini <jlentini@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Tue, 11 Sep 2007 22:00:58 +0000 (18:00 -0400)]
NFS: Kernel mount client should use async bind
Simplify the in-kernel mount client by using autobind instead of an
explicit call to rpc_getport_sync.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Tue, 11 Sep 2007 22:00:52 +0000 (18:00 -0400)]
SUNRPC: RPC bind failures should be permanent for NULL requests
The purpose of an RPC ping (a NULL request) is to determine whether the
remote end is operating and supports the RPC program and version of the
request.
If we do an RPC bind and the remote's rpcbind service says "this
program or service isn't supported" then we have our answer already,
and we should give up immediately.
This is good for the kernel mount client, as it will cause the request
to fail, and then allow an immediate retry with different options.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Tue, 11 Sep 2007 22:00:47 +0000 (18:00 -0400)]
SUNRPC: Split another new rpcbind retry error code from EACCES
Add more new error code processing to the kernel's rpcbind client
and to call_bind_status() to distinguish two cases:
Case 1: the remote has replied that the program/version tuple is not
registered (returns EACCES)
Case 2: retry with a lesser rpcbind version (rpcb now returns EPFNOSUPPORT)
This change allows more specific error processing for each of these two
cases. We now fail case 2 instead of retrying... it's a server
configuration error not to support even rpcbind version 2. And don't
expose this new error code to user land -- convert it to EIO before
failing the RPC.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Tue, 11 Sep 2007 22:00:41 +0000 (18:00 -0400)]
SUNRPC: Add a new error code for retry waiting for another binder
Add new error code processing to the kernel's rpcbind client and to
call_bind_status() to distinguish two cases:
Case 1: the remote has replied that the program/version tuple is not
registered (returns -EACCES)
Case 2: another process is already in the middle of binding on this
transport (now returns -EAGAIN)
This change allows more specific retry processing for each of these two
cases.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Tue, 11 Sep 2007 22:00:36 +0000 (18:00 -0400)]
SUNRPC: Retry bad rpcbind replies
When a server returns a bad rpcbind reply, make rpcbind client recovery logic
retry with an older protocol version. Older versions are more likely to work
correctly.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Tue, 11 Sep 2007 22:00:31 +0000 (18:00 -0400)]
SUNRPC: Make rpcb_decode_getaddr more picky about universal addresses
Add better sanity checking of server replies to the GETVERSADDR reply
decoder. Change the error return code: EIO is what other XDR decoding
routines return if there is a failure while decoding.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Tue, 11 Sep 2007 22:00:25 +0000 (18:00 -0400)]
SUNRPC: Clean up in rpc_show_tasks
/home/cel/linux/net/sunrpc/clnt.c: In function ‘rpc_show_tasks’:
/home/cel/linux/net/sunrpc/clnt.c:1538: warning:
signed and unsigned type in conditional expression
This points out another case where a conditional expression returns a
signed value in one arm and an unsigned value in the other.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Tue, 11 Sep 2007 22:00:20 +0000 (18:00 -0400)]
SUNRPC: Make sure server name is reasonable before trying to print it
Check the length of the passed-in server name before trying to print it in
the log.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Tue, 11 Sep 2007 22:00:15 +0000 (18:00 -0400)]
SUNRPC: Use correct argument type in memcpy()
Noticed by Tom Talpey <tmt@netapp.com>:
OBTW, there's a nit on that memcpy, too. The r_addr is an array, so
memcpy(&map->r_addr
is passing the address of the array as a char **. It's the same as
map->r_addr, but technically the wrong type.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Tue, 11 Sep 2007 22:00:09 +0000 (18:00 -0400)]
SUNRPC: fix a signed v. unsigned comparison nit in rpc_bind_new_program
/home/cel/linux/net/sunrpc/clnt.c: In function ‘rpc_bind_new_program’:
/home/cel/linux/net/sunrpc/clnt.c:445: warning:
comparison between signed and unsigned
RPC version numbers are u32, not int.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Tue, 11 Sep 2007 22:00:03 +0000 (18:00 -0400)]
SUNRPC: Only one dprintk is needed during client creation
Remove one of two identical dprintk's that occur when an RPC client is
created.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Thu, 16 Aug 2007 20:03:31 +0000 (16:03 -0400)]
SUNRPC: Fix generation of universal addresses for
Fix some problems with rpcbind v3 and v4 queries from the in-kernel rpcbind
client:
1. The r_addr argument must be a full universal address, not just an IP
address, and
2. The universal address in r_addr is the address of the remote rpcbind
server, not the RPC service being requested
This addresses bugzilla.kernel.org report 8891 for 2.6.23-rc and greater.
In addition, if the rpcbind client is unable to start the rpcbind request,
make sure not to leak the xprt.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Chuck Lever [Thu, 16 Aug 2007 20:03:26 +0000 (16:03 -0400)]
SUNRPC: Add support for formatted universal addresses
"Universal addresses" are a string representation of an IP address and
port. They are described fully in RFC 3530, section 2.2. Add support
for generating them in the RPC client's socket transport module.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Chuck Lever [Mon, 6 Aug 2007 15:58:04 +0000 (11:58 -0400)]
SUNRPC: Split xs_reclassify_socket into an IPv4 and IPv6 version
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Mon, 6 Aug 2007 15:57:58 +0000 (11:57 -0400)]
SUNRPC: Add a helper for extracting the address using the correct type
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Mon, 6 Aug 2007 15:57:53 +0000 (11:57 -0400)]
SUNRPC: Add IPv6 address support to net/sunrpc/xprtsock.c
Finalize support for setting up RPC client transports to remote RPC
services addressed via IPv6.
Based on work done by Gilles Quillard at Bull Open Source.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Mon, 6 Aug 2007 15:57:48 +0000 (11:57 -0400)]
SUNRPC: create connect workers for IPv6
Clone separate connect worker functions for connecting AF_INET6 sockets.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Mon, 6 Aug 2007 15:57:43 +0000 (11:57 -0400)]
SUNRPC: Rename IPv4 connect workers
Prepare for introduction of IPv6 versions of same.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Mon, 6 Aug 2007 15:57:38 +0000 (11:57 -0400)]
SUNRPC: Refactor a part of socket connect logic into a helper function
Finishing a socket connect is the same for IPv4 and IPv6, so split it out
into a helper.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Mon, 6 Aug 2007 15:57:33 +0000 (11:57 -0400)]
SUNRPC: create an IPv6-savvy mechanism for binding to a reserved port
Clone xs_bindresvport into two functions, one that can handle IPv4
addresses, and one that can handle IPv6 addresses.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Mon, 6 Aug 2007 15:57:28 +0000 (11:57 -0400)]
SUNRPC: Rename xs_bind() to prepare for IPv6-specific bind method
Prepare for introduction of IPv6-specific socket bind function.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Mon, 6 Aug 2007 15:57:23 +0000 (11:57 -0400)]
SUNRPC: Introduce support for setting the port number in IPv6 addresses
We could clone xs_set_port, but this is easier overall.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Mon, 6 Aug 2007 15:57:18 +0000 (11:57 -0400)]
SUNRPC: add support for IPv6 to the kernel's rpcbind client
Prepare for adding IPv6 support to the RPC client by adding IPv6
capabilities to rpcbind. Note that this is support on the query side
only; registering IPv6 addresses with the local portmapper will come
later.
Note we have to take care not to fall back to using version 2 of the
rpcbind protocol if we're dealing with IPv6 address. Version 2 doesn't
support IPv6 at all.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Mon, 6 Aug 2007 15:57:12 +0000 (11:57 -0400)]
SUNRPC: add a function to format IPv6 addresses
Clone xs_format_ipv4_peer_addresses into an IPv6 version.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Mon, 6 Aug 2007 15:57:07 +0000 (11:57 -0400)]
SUNRPC: Rename xs_format_peer_addresses
Prepare to add an IPv6 version of xs_format_peer_addresses by renaming it
to xs_format_ipv4_peer_addresses.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Mon, 6 Aug 2007 15:57:02 +0000 (11:57 -0400)]
SUNRPC: Add hex-formatted address support to rpc_peeraddr2str()
Add support for the NFS client's need to export volume information
with IP addresses formatted in hex instead of decimal.
This isn't used yet, but subsequent patches (not in this series) will
change the NFS client to use this functionality.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Mon, 6 Aug 2007 15:56:57 +0000 (11:56 -0400)]
SUNRPC: Free address buffers in a loop
Use more generic logic to free buffers holding formatted addresses. This
makes it less likely a bug will be introduced when adding additional buffer
types in xs_format_peer_address().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Mon, 6 Aug 2007 15:56:52 +0000 (11:56 -0400)]
SUNRPC: Use standard macros for printing IP addresses
include/linux/kernel.h gives us some nice macros for formatting IP
addresses. Use them.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Mon, 6 Aug 2007 15:56:42 +0000 (11:56 -0400)]
SUNRPC: Fix a signed v. unsigned comparison in net/sunrpc/xprtsock.c
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Mon, 6 Aug 2007 15:56:31 +0000 (11:56 -0400)]
SUNRPC: Fix a signed v. unsigned comparison in rpcbind's XDR routines
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Jeff Layton [Mon, 30 Jul 2007 12:47:38 +0000 (08:47 -0400)]
[NFS] [PATCH] NFS: show addr=ipaddr in /proc/mounts rather than
A minor thing, but useful when working with a server with multiple
addrs. This looks like it might also be necessary if Miklos' effort
to eliminate /etc/mtab ever comes to fruition.
When displaying mount options in /proc/mounts, the kernel prints
"addr=hostname". This info is redundant since we already have the
hostname displayed as part of the "device" section of the mount. This
patch changes it to display the IP address to which the socket is
connected.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Christoph Hellwig [Fri, 3 Aug 2007 14:20:32 +0000 (16:20 +0200)]
[NFS] [PATCH] nfs: tiny makefile cleanup
no need to set up foo-objs these days.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Fabio Olive Leite [Fri, 27 Jul 2007 01:59:00 +0000 (22:59 -0300)]
Re: [NFS] [PATCH] Attribute timeout handling and wrapping u32 jiffies
I would like to discuss the idea that the current checks for attribute
timeout using time_after are inadequate for 32bit architectures, since
time_after works correctly only when the two timestamps being compared
are within 2^31 jiffies of each other. The signed overflow caused by
comparing values more than 2^31 jiffies apart will flip the result,
causing incorrect assumptions of validity.
2^31 jiffies is a fairly large period of time (~25 days) when compared
to the lifetime of most kernel data structures, but for long lived NFS
mounts that can sit idle for months (think that for some reason autofs
cannot be used), it is easy to compare inode attribute timestamps with
very disparate or even bogus values (as in when jiffies have wrapped
many times, where the comparison doesn't even make sense).
Currently the code tests for attribute timeout by simply adding the
desired amount of jiffies to the stored timestamp and comparing that
with the current timestamp of obtained attribute data with time_after.
This is incorrect, as it returns true for the desired timeout period
and another full 2^31 range of jiffies.
In testing with artificial jumps (several small jumps, not one big
crank) of the jiffies I was able to reproduce a problem found in a
server with very long lived NFS mounts, where attributes would not be
refreshed even after touching files and directories in the server:
Initial uptime:
03:42:01 up 6 min, 0 users, load average: 0.01, 0.12, 0.07
NFS volume is mounted and time is advanced:
03:38:09 up 25 days, 2 min, 0 users, load average: 1.22, 1.05, 1.08
# ls -l /local/A/foo/bar /nfs/A/foo/bar
-rw-r--r-- 1 root root 0 Dec 17 03:38 /local/A/foo/bar
-rw-r--r-- 1 root root 0 Nov 22 00:36 /nfs/A/foo/bar
# touch /local/A/foo/bar
# ls -l /local/A/foo/bar /nfs/A/foo/bar
-rw-r--r-- 1 root root 0 Dec 17 03:47 /local/A/foo/bar
-rw-r--r-- 1 root root 0 Nov 22 00:36 /nfs/A/foo/bar
We can see the local mtime is updated, but the NFS mount still shows
the old value. The patch below makes it work:
Initial setup...
07:11:02 up 25 days, 1 min, 0 users, load average: 0.15, 0.03, 0.04
# ls -l /local/A/foo/bar /nfs/A/foo/bar
-rw-r--r-- 1 root root 0 Jan 11 07:11 /local/A/foo/bar
-rw-r--r-- 1 root root 0 Jan 11 07:11 /nfs/A/foo/bar
# touch /local/A/foo/bar
# ls -l /local/A/foo/bar /nfs/A/foo/bar
-rw-r--r-- 1 root root 0 Jan 11 07:14 /local/A/foo/bar
-rw-r--r-- 1 root root 0 Jan 11 07:14 /nfs/A/foo/bar
Signed-off-by: Fabio Olive Leite <fleite@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Peter Staubach [Fri, 3 Aug 2007 19:07:10 +0000 (15:07 -0400)]
64 bit ino support for NFS client
Hi.
Attached is a patch to modify the NFS client code to support
64 bit ino's, as appropriate for the system and the NFS
protocol version.
The code basically just expand the NFS interfaces for routines
which handle ino's from using ino_t to u64 and then uses the
fileid in the nfs_inode instead of i_ino in the inode. The
code paths that were updated are in the getattr method and
the readdir methods.
This should be no real change on 64 bit platforms. Since
the ino_t is an unsigned long, it would already be 64 bits
wide.
Thanx...
ps
Signed-off-by: Peter Staubach <staubach@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Trond Myklebust [Fri, 8 Jun 2007 02:44:34 +0000 (22:44 -0400)]
SUNRPC: Convert rpc_pipefs to use the generic filesystem notification hooks
This will allow rpc.gssd to use inotify instead of dnotify in order to
locate new rpc upcall pipes.
This also requires the exporting of __audit_inode_child(), which is used by
fsnotify_create() and fsnotify_mkdir(). Ccing David Woodhouse.
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Trond Myklebust [Wed, 25 Jul 2007 18:09:54 +0000 (14:09 -0400)]
NFS: Fall back to synchronous writes when a background write errors...
This helps prevent huge queues of background writes from building up
whenever the server runs out of disk or quota space, or if someone changes
the file access modes behind our backs.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Trond Myklebust [Wed, 25 Jul 2007 18:09:54 +0000 (14:09 -0400)]
NFS: Writeback optimisation
Schedule writes using WB_SYNC_NONE first, then come back for a second pass
using WB_SYNC_ALL.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Trond Myklebust [Fri, 20 Jul 2007 17:13:28 +0000 (13:13 -0400)]
NFS: Clean up NFS writeback flush code
The only user of nfs_sync_mapping_range() is nfs_getattr(), which uses it
to flush out the entire inode without sending a commit. We therefore
replace nfs_sync_mapping_range with a more appropriate helper.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Trond Myklebust [Sun, 22 Jul 2007 23:27:46 +0000 (19:27 -0400)]
VFS: Remove writeback_control->fs_private
The only user of this field was NFS.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Trond Myklebust [Sun, 22 Jul 2007 23:27:32 +0000 (19:27 -0400)]
NFS: Clean up nfs_writepages()
Just call write_cache_pages directly instead of hacking the writeback
control structure in order to find out if we were called from writepages()
or directly from the VM.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Trond Myklebust [Sun, 22 Jul 2007 21:09:05 +0000 (17:09 -0400)]
NFS: Clean up write code...
The addition of nfs_page_mkwrite means that We should no longer need to
create requests inside nfs_writepage()
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Trond Myklebust [Sun, 22 Jul 2007 21:09:05 +0000 (17:09 -0400)]
NFS: Add the helper nfs_vm_page_mkwrite
This is needed in order to set up a proper nfs_page request for mmapped
files.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Linus Torvalds [Tue, 9 Oct 2007 20:31:38 +0000 (13:31 -0700)]
Linux 2.6.23
Linus Torvalds [Tue, 9 Oct 2007 19:38:44 +0000 (12:38 -0700)]
Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
[MIPS] Au1000: set the PCI controller IO base
[MIPS] Alchemy: Fix USB initialization.
[MIPS] IP32: Fix fatal typo in address computation.
Trond Myklebust [Tue, 9 Oct 2007 15:04:57 +0000 (11:04 -0400)]
NLM: Fix a memory leak in nlmsvc_testlock
The recent fix for a circular lock dependency unfortunately introduced a
potential memory leak in the event where the call to nlmsvc_lookup_host
fails for some reason.
Thanks to Roel Kluin for spotting this.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Garzik [Tue, 9 Oct 2007 17:51:57 +0000 (13:51 -0400)]
sata_mv: correct S/G table limits
The recent mv_fill_sg() rewrite, to fix a data corruption problem
related to IOMMU virtual merging, forgot to account for the
potentially-increased size of the scatter/gather table after its run.
Additionally, the DMA boundary is reduced from 0xffffffff to 0xffff
to more closely match the needs of mv_fill_sg().
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Florian Fainelli [Tue, 25 Sep 2007 15:07:30 +0000 (17:07 +0200)]
[MIPS] Au1000: set the PCI controller IO base
The PCI controller IO base was not set in the au1000 pci code.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Florian Fainelli [Tue, 25 Sep 2007 15:07:24 +0000 (17:07 +0200)]
[MIPS] Alchemy: Fix USB initialization.
This patch fixes a wrong ifdef in the board setup code, leading to the GPIO
pin not being pulled high, and thus the USB switch not being powered at all.
This finishes the rename of CONFIG_USB_OHCI to CONFIG_USB_OHCI_HCD, which
started in 2005 (before 2.6.12-rc2), then probably because things were
working anyway for most people got forgotten.
[Ralf: Paolo's original patch didn't fix the module case, Florian's patch
only fixed MTX1 etc. so this is a combined patch plus some cleanups.]
Cc: Giuseppe Patanè <giuseppe.patane@tvblob.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Giuseppe Sacco [Sat, 6 Oct 2007 17:55:03 +0000 (19:55 +0200)]
[MIPS] IP32: Fix fatal typo in address computation.
Signed-off-by: Giuseppe Sacco <eppesuig@debian.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Maarten Bressers [Mon, 8 Oct 2007 22:59:13 +0000 (15:59 -0700)]
Correct Makefile rule for generating custom keymap
When building a custom keymap, after setting GENERATE_KEYMAP := 1 in
drivers/char/Makefile, the kernel build fails like this:
CC drivers/char/vt.o
make[2]: *** No rule to make target `drivers/char/%.map', needed by `drivers/char/defkeymap.c'. Stop.
make[1]: *** [drivers/char] Error 2
make: *** [drivers] Error 2
This was caused by commit
af8b128719f5248e542036ea994610a29d0642a6, which
deleted a necessary colon from the Makefile rule that generates the keymap,
since that rule contains both a target and a target-pattern. The following
patch puts the colon back:
Signed-off-by: Maarten Bressers <mbres@gentoo.org>
Cc: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Karsten Keil [Mon, 8 Oct 2007 10:52:09 +0000 (12:52 +0200)]
ISDN: Fix data access out of array bounds
Fix against access random data bytes outside the dev->chanmap array.
Thanks to Oliver Neukum for pointing me to this issue.
Signed-off-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 8 Oct 2007 19:59:10 +0000 (12:59 -0700)]
Merge branch 'master' of /linux/kernel/git/davem/net-2.6
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
[IPv6]: Fix ICMPv6 redirect handling with target multicast address
[PKT_SCHED] cls_u32: error code isn't been propogated properly
[ROSE]: Fix rose.ko oops on unload
[TCP]: Fix fastpath_cnt_hint when GSO skb is partially ACKed
Yan Zheng [Mon, 8 Oct 2007 19:16:20 +0000 (12:16 -0700)]
AIO: fix cleanup in io_submit_one(...)
When IOCB_FLAG_RESFD flag is set and iocb->aio_resfd is incorrect,
statement 'goto out_put_req' is executed. At label 'out_put_req',
aio_put_req(..) is called, which requires 'req->ki_filp' set.
Signed-off-by: Yan Zheng<yanzheng@21cn.com>
Cc: Zach Brown <zach.brown@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yan Zheng [Mon, 8 Oct 2007 17:08:37 +0000 (10:08 -0700)]
fix page release issue in filemap_fault
find_lock_page increases page's usage count, we should decrease it
before return VM_FAULT_SIGBUS
Signed-off-by: Yan Zheng<yanzheng@21cn.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yan Zheng [Mon, 8 Oct 2007 17:05:48 +0000 (10:05 -0700)]
fix VM_CAN_NONLINEAR check in sys_remap_file_pages
The test for VM_CAN_NONLINEAR always fails
Signed-off-by: Yan Zheng<yanzheng@21cn.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Peter Zijlstra [Mon, 8 Oct 2007 16:54:37 +0000 (18:54 +0200)]
mm: set_page_dirty_balance() vs ->page_mkwrite()
All the current page_mkwrite() implementations also set the page dirty. Which
results in the set_page_dirty_balance() call to _not_ call balance, because the
page is already found dirty.
This allows us to dirty a _lot_ of pages without ever hitting
balance_dirty_pages(). Not good (tm).
Force a balance call if ->page_mkwrite() was successful.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Brian Haley [Mon, 8 Oct 2007 07:12:05 +0000 (00:12 -0700)]
[IPv6]: Fix ICMPv6 redirect handling with target multicast address
When the ICMPv6 Target address is multicast, Linux processes the
redirect instead of dropping it. The problem is in this code in
ndisc_redirect_rcv():
if (ipv6_addr_equal(dest, target)) {
on_link = 1;
} else if (!(ipv6_addr_type(target) & IPV6_ADDR_LINKLOCAL)) {
ND_PRINTK2(KERN_WARNING
"ICMPv6 Redirect: target address is not
link-local.\n");
return;
}
This second check will succeed if the Target address is, for example,
FF02::1 because it has link-local scope. Instead, it should be checking
if it's a unicast link-local address, as stated in RFC 2461/4861 Section
8.1:
- The ICMP Target Address is either a link-local address (when
redirected to a router) or the same as the ICMP Destination
Address (when redirected to the on-link destination).
I know this doesn't explicitly say unicast link-local address, but it's
implied.
This bug is preventing Linux kernels from achieving IPv6 Logo Phase II
certification because of a recent error that was found in the TAHI test
suite - Neighbor Disovery suite test 206 (v6LC.2.3.6_G) had the
multicast address in the Destination field instead of Target field, so
we were passing the test. This won't be the case anymore.
The patch below fixes this problem, and also fixes ndisc_send_redirect()
to not send an invalid redirect with a multicast address in the Target
field. I re-ran the TAHI Neighbor Discovery section to make sure Linux
passes all 245 tests now.
Signed-off-by: Brian Haley <brian.haley@hp.com>
Acked-by: David L Stevens <dlstevens@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen Hemminger [Mon, 8 Oct 2007 06:57:45 +0000 (23:57 -0700)]
[PKT_SCHED] cls_u32: error code isn't been propogated properly
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexey Dobriyan [Mon, 8 Oct 2007 06:44:17 +0000 (23:44 -0700)]
[ROSE]: Fix rose.ko oops on unload
Commit
a3d384029aa304f8f3f5355d35f0ae274454f7cd aka
"[AX.25]: Fix unchecked rose_add_loopback_neigh uses"
transformed rose_loopback_neigh var into statically allocated one.
However, on unload it will be kfree's which can't work.
Steps to reproduce:
modprobe rose
rmmod rose
BUG: unable to handle kernel NULL pointer dereference at virtual address
00000008
printing eip:
c014c664
*pde =
00000000
Oops: 0000 [#1]
PREEMPT DEBUG_PAGEALLOC
Modules linked in: rose ax25 fan ufs loop usbhid rtc snd_intel8x0 snd_ac97_codec ehci_hcd ac97_bus uhci_hcd thermal usbcore button processor evdev sr_mod cdrom
CPU: 0
EIP: 0060:[<
c014c664>] Not tainted VLI
EFLAGS:
00210086 (2.6.23-rc9 #3)
EIP is at kfree+0x48/0xa1
eax:
00000556 ebx:
c1734aa0 ecx:
f6a5e000 edx:
f7082000
esi:
00000000 edi:
f9a55d20 ebp:
00200287 esp:
f6a5ef28
ds: 007b es: 007b fs: 0000 gs: 0033 ss: 0068
Process rmmod (pid: 1823, ti=
f6a5e000 task=
f7082000 task.ti=
f6a5e000)
Stack:
f9a55d20 f9a5200c 00000000 00000000 00000000 f6a5e000 f9a5200c f9a55a00
00000000 bf818cf0 f9a51f3f f9a55a00 00000000 c0132c60 65736f72 00000000
f69f9630 f69f9528 c014244a f6a4e900 00200246 f7082000 c01025e6 00000000
Call Trace:
[<
f9a5200c>] rose_rt_free+0x1d/0x49 [rose]
[<
f9a5200c>] rose_rt_free+0x1d/0x49 [rose]
[<
f9a51f3f>] rose_exit+0x4c/0xd5 [rose]
[<
c0132c60>] sys_delete_module+0x15e/0x186
[<
c014244a>] remove_vma+0x40/0x45
[<
c01025e6>] sysenter_past_esp+0x8f/0x99
[<
c012bacf>] trace_hardirqs_on+0x118/0x13b
[<
c01025b6>] sysenter_past_esp+0x5f/0x99
=======================
Code: 05 03 1d 80 db 5b c0 8b 03 25 00 40 02 00 3d 00 40 02 00 75 03 8b 5b 0c 8b 73 10 8b 44 24 18 89 44 24 04 9c 5d fa e8 77 df fd ff <8b> 56 08 89 f8 e8 84 f4 fd ff e8 bd 32 06 00 3b 5c 86 60 75 0f
EIP: [<
c014c664>] kfree+0x48/0xa1 SS:ESP 0068:
f6a5ef28
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ilpo Järvinen [Mon, 8 Oct 2007 06:43:10 +0000 (23:43 -0700)]
[TCP]: Fix fastpath_cnt_hint when GSO skb is partially ACKed
When only GSO skb was partially ACKed, no hints are reset,
therefore fastpath_cnt_hint must be tweaked too or else it can
corrupt fackets_out. The corruption to occur, one must have
non-trivial ACK/SACK sequence, so this bug is not very often
that harmful. There's a fackets_out state reset in TCP because
fackets_out is known to be inaccurate and that fixes the issue
eventually anyway.
In case there was also at least one skb that got fully ACKed,
the fastpath_skb_hint is set to NULL which causes a recount for
fastpath_cnt_hint (the old value won't be accessed anymore),
thus it can safely be decremented without additional checking.
Reported by Cedric Le Goater <clg@fr.ibm.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Torokhov [Sun, 7 Oct 2007 16:22:21 +0000 (12:22 -0400)]
Driver core: fix SYSF_DEPRECATED breakage for nested classdevs
We should only reparent to a class former class devices that
form the base of class hierarchy. Nested devices should still
grow from their real parents.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Tested-by: Andrey Borzenkov <arvidjaar@mail.ru>
Tested-by: Anssi Hannula <anssi.hannula@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 7 Oct 2007 23:41:09 +0000 (16:41 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ieee1394/linux1394-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
firewire: point to migration document
Attila Kinali [Sun, 7 Oct 2007 07:24:38 +0000 (00:24 -0700)]
Add manufacturer and card id of teltonica pcmcia modems
Add the manufacturer and card id of teltonica pcmcia modems to serial_cs.c
Signed-off-by: Attila Kinali <attila@kinali.ch>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pavel Machek [Sun, 7 Oct 2007 07:24:37 +0000 (00:24 -0700)]
sysrq docs: document sequence that actually works
Document sequence of keypresses that actually works. Yes, this changed
year-or-so ago.
Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Sun, 7 Oct 2007 07:24:36 +0000 (00:24 -0700)]
fix bogus reporting of signals by audit
Async signals should not be reported as sent by current in audit log. As
it is, we call audit_signal_info() too early in check_kill_permission().
Note that check_kill_permission() has that test already - it needs to know
if it should apply current-based permission checks. So the solution is to
move the call of audit_signal_info() between those.
Bogosity in question is easily reproduced - add a rule watching for e.g.
kill(2) from specific process (so that audit_signal_info() would not
short-circuit to nothing), say load_policy, watch the bogus OBJ_PID entry
in audit logs claiming that write(2) on selinuxfs file issued by
load_policy(8) had somehow managed to send a signal to syslogd...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Steve Grubb <sgrubb@redhat.com>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexey Dobriyan [Sun, 7 Oct 2007 07:24:34 +0000 (00:24 -0700)]
Move kasprintf.o to obj-y
Modulat lguest started giving linking errors
MODPOST 1 modules
ERROR: "kasprintf" [drivers/lguest/lg.ko] undefined!
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Peter Zijlstra [Sun, 7 Oct 2007 07:24:33 +0000 (00:24 -0700)]
lockstat: documentation
Provide some documentation for CONFIG_LOCK_STAT.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Cc: Rob Landley <rob@landley.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rafal Bilski [Sun, 7 Oct 2007 07:24:32 +0000 (00:24 -0700)]
Longhaul: add auto enabled "revid_errata" option
VIA C3 Ezra-T has RevisionID equal to 1, but it needs RevisionKey to be 0
or CPU will ignore new frequency and will continue to work at old
frequency. New "revid_errata" option will force RevisionKey to be set to
0, whatever RevisionID is.
Additionaly "Longhaul" will not silently ignore unsuccessful transition.
It will try to check if "revid_errata" or "disable_acpi_c3" options need to
be enabled for this processor/system.
Same for Longhaul ver. 2 support. It will be disabled if none of above
options will work.
Best case scenario (with patch apllied and v2 enabled):
longhaul: VIA C3 'Ezra' [C5C] CPU detected. Longhaul v2 supported.
longhaul: Using northbridge support.
longhaul: VRM 8.5
longhaul: Max VID=1.350 Min VID=1.050, 13 possible voltage scales
longhaul: f: 300000 kHz, index: 0, vid: 1050 mV
[...]
longhaul: Voltage scaling enabled.
Worst case scenario:
longhaul: VIA C3 'Ezra-T' [C5M] CPU detected. Powersaver supported.
longhaul: Using northbridge support.
longhaul: Using ACPI support.
longhaul: VRM 8.5
longhaul: Claims to support voltage scaling but min & max are both 1.250. Voltage scaling disabled
longhaul: Failed to set requested frequency!
longhaul: Enabling "Ignore Revision ID" option.
longhaul: Failed to set requested frequency!
longhaul: Disabling ACPI C3 support.
longhaul: Disabling "Ignore Revision ID" option.
longhaul: Failed to set requested frequency!
longhaul: Enabling "Ignore Revision ID" option.
[akpm@linux-foundation.org: coding-style cleanups]
Signed-off-by: Rafal Bilski <rafalbilski@interia.pl>
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Anton Blanchard [Sun, 7 Oct 2007 07:24:31 +0000 (00:24 -0700)]
Fix timer_stats printout of events/sec
When using /proc/timer_stats on ppc64 I noticed the events/sec field wasnt
accurate. Sometimes the integer part was incorrect due to rounding (we
werent taking the fractional seconds into consideration).
The fraction part is also wrong, we need to pad the printf statement and
take the bottom three digits of 1000 times the value.
Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 7 Oct 2007 23:17:38 +0000 (16:17 -0700)]
Don't do load-average calculations at even 5-second intervals
It turns out that there are a few other five-second timers in the
kernel, and if the timers get in sync, the load-average can get
artificially inflated by events that just happen to coincide.
So just offset the load average calculation it by a timer tick.
Noticed by Anders Boström, for whom the coincidence started triggering
on one of his machines with the JBD jiffies rounding code (JBD is one of
the subsystems that also end up using a 5-second timer by default).
Tested-by: Anders Boström <anders@bostrom.dyndns.org>
Cc: Chuck Ebbert <cebbert@redhat.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 7 Oct 2007 23:02:55 +0000 (16:02 -0700)]
VT_WAITACTIVE: Avoid returning EINTR when not necessary
We should generally prefer to return ERESTARTNOHAND rather than EINTR,
so that processes with unhandled signals that get ignored don't return
EINTR.
This can help with X startup issues:
Fatal server error:
xf86OpenConsole: VT_WAITACTIVE failed: Interrupted system call
although the real fix is having the X server always retry EINTR
regardless (since EINTR does happen for signals that have handlers
installed). Keithp has a patch for that.
Regardless, ERESTARTNOHAND is the correct thing to use.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stefan Richter [Sun, 7 Oct 2007 10:31:22 +0000 (12:31 +0200)]
firewire: point to migration document
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Linus Torvalds [Sat, 6 Oct 2007 22:47:16 +0000 (15:47 -0700)]
Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
[MIPS] IP32: Enable PCI bridges
Kyle McMartin [Sat, 6 Oct 2007 05:42:34 +0000 (01:42 -0400)]
Revert "intel_agp: fix stolen mem range on G33"
This reverts commit
f443675affe3f16dd428e46f0f7fd3f4d703eeab, which
breaks horribly if you aren't running an unreleased xf86-video-intel
driver out of git.
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Zhenyu Wang <zhenyu.z.wang@intel.com>
Acked-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Benjamin Herrenschmidt [Sat, 6 Oct 2007 08:52:27 +0000 (18:52 +1000)]
Fix non-terminated PCI match table in PowerMac IDE
The PCI device table in the powermac IDE driver isn't properly
terminated. Depending on how your kernel is linked and other random
factors, you can end up with this driver matched against any other PCI
device in your system, possibly crashing at boot.
Thanks to Heikki for tracking this down with me, the bug have been there
for some time, though it rarely hurts due to luck. In this case, the
switch from .22 to .23-rc9 is causing it to show up due to differences
in the resulting layout of .data I suppose.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <pmac@au1.ibm.com>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Heikki Lindholm <holindho@cs.helsinki.fi>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeremy Fitzhardinge [Sat, 6 Oct 2007 00:19:35 +0000 (17:19 -0700)]
xen: disable split pte locks for now
When pinning and unpinning pagetables, we must protect them against
being used by other CPUs, lest they see the pagetable in an
intermediate read-only-but-not-pinned state.
When using split pte locks, doing this properly would require taking
all the pte locks for the pagetable while pinning, but this may overflow
the PREEMPT_BITS part of the preempt counter if the process has mapped
more than about 512M of memory.
However, failing to take the pte locks causes write-protect faults when
the pageout code is trying to clear the Access bit on a pte which is part
of a freshy created and still being pinned process after fork.
This is a short-term fix until the problem is solved properly.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Hugh Dickins <hugh@veritas.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andi Kleen <ak@suse.de>
Cc: Keir Fraser <keir@xensource.com>
Cc: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 5 Oct 2007 21:09:10 +0000 (14:09 -0700)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
[ARM] 4598/2: OSIRIS: Ensure we do not get nRSTOUT during suspend
[ARM] 4597/2: OSIRIS: ensure CPLD0 is preserved after suspend
Ben Dooks [Thu, 4 Oct 2007 22:18:08 +0000 (23:18 +0100)]
[ARM] 4598/2: OSIRIS: Ensure we do not get nRSTOUT during suspend
Ensure nRSTOUT is not asserted during or on resume.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Ben Dooks [Thu, 4 Oct 2007 22:16:42 +0000 (23:16 +0100)]
[ARM] 4597/2: OSIRIS: ensure CPLD0 is preserved after suspend
Ensure that CPLD is restored to the original state
on resume, and that before going into suspend we
select the NAND bank we booted from for restarting.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Francois Romieu [Wed, 3 Oct 2007 22:42:50 +0000 (00:42 +0200)]
r8169: revert part of
6dccd16b7c2703e8bbf8bca62b5cf248332afbe2
The 8169/8110SC currently announces itself as:
[...]
eth0: RTL8169sc/8110sc at 0x........, ..:..:..:..:..:.., XID
18000000 IRQ ..
^^^^^^^^
It uses RTL_GIGA_MAC_VER_05 and this part of the changeset can cut
its performance by a factor of 2~2.5 as reported by Timo.
(the driver includes code just before the hunk to write the ChipCmd
register when mac_version == RTL_GIGA_MAC_VER_0[1-4])
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Timo Jantunen <jeti@welho.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Linus Torvalds [Fri, 5 Oct 2007 15:08:08 +0000 (08:08 -0700)]
Merge branch 'master' of /linux/kernel/git/davem/sparc-2.6
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
[SPARC64]: Fix 'niu' complex IRQ probing.
[SPARC64]: check fork_idle() error
[SPARC64]: Temporary workaround for PCI-E slot on T1000.
[SPARC64]: VIO device addition log message level is too high.
[SPARC64]: Fix domain-services port probing.
[SPARC64]: Don't use in/local regs for ldx/stx data in N1 memcpy.
Serge Belyshev [Thu, 4 Oct 2007 21:10:04 +0000 (23:10 +0200)]
Remove unnecessary cast in prefetch()
It is ok to call prefetch() function with NULL argument, as specifically
commented in include/linux/prefetch.h. But in standard C, it is invalid
to dereference NULL pointer (see C99 standard 6.5.3.2 paragraph 4 and
note #84).
prefetch() has a memory reference for its argument.
Newer gcc versions (4.3 and above) will use that to conclude that "x"
argument is non-null and thus wreaking havok everywhere prefetch() was
inlined.
Fixed by removing cast and changing asm constraint.
[ It seems in theory gcc 4.2 could miscompile this too; although no
cases known. In 2.6.24 we should probably switch to
__builtin_prefetch() instead, but this is a simpler fix for now.
-- AK ]
Signed-off-by: Serge Belyshev <belyshev@depni.sinp.msu.ru>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Giuseppe Sacco [Thu, 4 Oct 2007 21:09:12 +0000 (23:09 +0200)]
[MIPS] IP32: Enable PCI bridges
Fixe MACE PCI addressing by adding the bus number parameter.
Remove check of the used slot since every slot should be valid.
Converted mkaddr from #define to inline function.
Signed-off-by: Giuseppe Sacco <eppesuig@debian.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David S. Miller [Thu, 4 Oct 2007 22:03:35 +0000 (15:03 -0700)]
[SPARC64]: Fix 'niu' complex IRQ probing.
They should be computed the same as how we compute
them under 'virtual-devices'.
Signed-off-by: David S. Miller <davem@davemloft.net>
Akinobu Mita [Thu, 4 Oct 2007 21:55:59 +0000 (14:55 -0700)]
[SPARC64]: check fork_idle() error
Check the return value of fork_idle() to catch error.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 4 Oct 2007 17:29:19 +0000 (10:29 -0700)]
Merge /linux/kernel/git/jejb/scsi-rc-fixes-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
[SCSI] megaraid_old: fix READ_CAPACITY
Hugh Dickins [Thu, 4 Oct 2007 15:56:06 +0000 (16:56 +0100)]
Fix sys_remap_file_pages BUG at highmem.c:15!
Gurudas Pai reports kernel BUG at arch/i386/mm/highmem.c:15! below
sys_remap_file_pages, while running Oracle database test on x86 in 6GB
RAM: kunmap thinks we're in_interrupt because the preempt count has
wrapped.
That's because __do_fault expected to unmap page_table, but one of its
two callers do_nonlinear_fault already unmapped it: let do_linear_fault
unmap it first too, and then there's no need to pass the page_table arg
down.
Why have we been so slow to notice this? Probably through forgetting
that the mapping_cap_account_dirty test means that sys_remap_file_pages
nowadays only goes the full nonlinear vma route on a few memory-backed
filesystems like ramfs, tmpfs and hugetlbfs.
[ It also depends on CONFIG_HIGHPTE, so it becomes even harder to
trigger in practice. Many who have need of large memory have probably
migrated to x86-64..
Problem introduced by commit
d0217ac04ca6591841e5665f518e38064f4e65bd
("mm: fault feedback #1") -- Linus ]
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: gurudas pai <gurudas.pai@oracle.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
FUJITA Tomonori [Wed, 3 Oct 2007 00:00:58 +0000 (09:00 +0900)]
[SCSI] megaraid_old: fix READ_CAPACITY
The bulk transfer mode got eleminated by
3f6270ef76f2ce5c134615a470685d6c2a66c07e. Unfortunately, this mode is
required for READ_CAPACITY commands on certain cards, so put it back
again. This fixes a boot failure regression reported by Burton
Windle.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
David S. Miller [Thu, 4 Oct 2007 04:37:57 +0000 (21:37 -0700)]
[SPARC64]: Temporary workaround for PCI-E slot on T1000.
The PCI-E slot on T1000 connects directly to the Fire PCI chip with no
intervening bridges visible in the OBP tree.
Unfortunately the bus numbering of the device in that slot is
different (2) from the PCI host controller (0), and thus the
pci_bus_{read,write}_config_*() calls don't work out.
Complicating things further the Fire PCI controller has no config
space it responds to either.
For now treat this case specially so that devices in the slot work.
Longer term we need to perhaps cons up a dummy bridge between the Fire
and the PCI-E slot so that the bus hierarchy is complete inside of the
kernel and thus the bus numbering all works out right.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 4 Oct 2007 04:23:40 +0000 (21:23 -0700)]
[SPARC64]: VIO device addition log message level is too high.
There is no reason this should be KERN_ERR, KERN_INFO is
just fine.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 4 Oct 2007 04:08:11 +0000 (21:08 -0700)]
[SPARC64]: Fix domain-services port probing.
We should only use ports underneath "domain-services", other DS ports
in the MDESC aren't for us to use.
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Wed, 3 Oct 2007 22:44:10 +0000 (15:44 -0700)]
Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
drivers/ata/pata_ixp4xx_cf.c: ioremap return code check
Ata: pata_marvell, use ioread* for iomap-ped memory
libata: fix for sata_mv >64KB DMA segments
Linus Torvalds [Wed, 3 Oct 2007 22:43:36 +0000 (15:43 -0700)]
Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/netdev-2.6
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
sky2: jumbo frame regression fix
[PATCH] softmac: Fix compiler-warning
[PATCH] bcm43xx: Correct printk with PFX before KERN_
Linus Torvalds [Wed, 3 Oct 2007 22:43:17 +0000 (15:43 -0700)]
Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
[MIPS] Terminally fix local_{dec,sub}_if_positive
[MIPS] Type proof reimplementation of cmpxchg.
[MIPS] pg-r4k.c: Fix a typo in an R4600 v2 erratum workaround
Linus Torvalds [Wed, 3 Oct 2007 22:34:07 +0000 (15:34 -0700)]
Merge branch 'for-linus' of /linux/kernel/git/cooloney/blackfin-2.6
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6:
Blackfin arch: fix PORT_J BUG for BF537/6 EMAC driver reported by Kalle Pokki <kalle.pokki@iki.fi>
Blackfin arch: gpio pinmux and resource allocation API required by BF537 on chip ethernet mac driver
Blackfin arch: add some missing syscall
binfmt_flat: checkpatch fixing minimum support for the blackfin relocations
Binfmt_flat: Add minimum support for the Blackfin relocations
Scott Thompson [Tue, 2 Oct 2007 20:53:01 +0000 (13:53 -0700)]
drivers/ata/pata_ixp4xx_cf.c: ioremap return code check
Add missing ioremap return checks.
Signed-off-by: Scott Thompson <postfail <at> hushmail.com>
Acked-by: Tejun Heo <htejun@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Jiri Slaby [Tue, 2 Oct 2007 20:53:01 +0000 (13:53 -0700)]
Ata: pata_marvell, use ioread* for iomap-ped memory
pata_marvell, use ioread* for iomap-ped memory
read* on pci_iomapped memory is incorrect, fix it
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
This page took 0.047786 seconds and 5 git commands to generate.