From ba364fc752daeded072a5ef31e43b84cb1f9e5fd Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Thu, 10 Jul 2014 23:36:21 +0200 Subject: [PATCH] ARM: Kirkwood: Remove mach-kirkwood Now that all boards have been converted to DT and all the support code lives in mach-mvebu, we can remove mach-kirkwood. Signed-off-by: Andrew Lunn Link: https://lkml.kernel.org/r/1405028192-9623-2-git-send-email-andrew@lunn.ch Signed-off-by: Jason Cooper --- arch/arm/Kconfig | 18 - arch/arm/Kconfig.debug | 5 +- arch/arm/Makefile | 1 - arch/arm/boot/dts/Makefile | 5 +- arch/arm/mach-kirkwood/Kconfig | 111 --- arch/arm/mach-kirkwood/Makefile | 14 - arch/arm/mach-kirkwood/Makefile.boot | 3 - arch/arm/mach-kirkwood/board-dt.c | 223 ------ arch/arm/mach-kirkwood/common.c | 746 ------------------ arch/arm/mach-kirkwood/common.h | 74 -- arch/arm/mach-kirkwood/d2net_v2-setup.c | 231 ------ .../mach-kirkwood/include/mach/bridge-regs.h | 86 -- .../mach-kirkwood/include/mach/entry-macro.S | 34 - .../arm/mach-kirkwood/include/mach/hardware.h | 14 - arch/arm/mach-kirkwood/include/mach/irqs.h | 65 -- .../arm/mach-kirkwood/include/mach/kirkwood.h | 142 ---- .../mach-kirkwood/include/mach/uncompress.h | 46 -- arch/arm/mach-kirkwood/irq.c | 82 -- arch/arm/mach-kirkwood/lacie_v2-common.c | 114 --- arch/arm/mach-kirkwood/lacie_v2-common.h | 16 - arch/arm/mach-kirkwood/mpp.c | 43 - arch/arm/mach-kirkwood/mpp.h | 348 -------- arch/arm/mach-kirkwood/netxbig_v2-setup.c | 422 ---------- arch/arm/mach-kirkwood/openrd-setup.c | 255 ------ arch/arm/mach-kirkwood/pcie.c | 296 ------- arch/arm/mach-kirkwood/pm.c | 76 -- arch/arm/mach-kirkwood/pm.h | 26 - arch/arm/mach-kirkwood/rd88f6192-nas-setup.c | 89 --- arch/arm/mach-kirkwood/rd88f6281-setup.c | 128 --- arch/arm/mach-kirkwood/t5325-setup.c | 216 ----- arch/arm/mach-kirkwood/ts219-setup.c | 142 ---- arch/arm/mach-kirkwood/ts41x-setup.c | 186 ----- arch/arm/mach-kirkwood/tsx1x-common.c | 113 --- arch/arm/mach-kirkwood/tsx1x-common.h | 7 - arch/arm/mm/Kconfig | 2 +- 35 files changed, 4 insertions(+), 4375 deletions(-) delete mode 100644 arch/arm/mach-kirkwood/Kconfig delete mode 100644 arch/arm/mach-kirkwood/Makefile delete mode 100644 arch/arm/mach-kirkwood/Makefile.boot delete mode 100644 arch/arm/mach-kirkwood/board-dt.c delete mode 100644 arch/arm/mach-kirkwood/common.c delete mode 100644 arch/arm/mach-kirkwood/common.h delete mode 100644 arch/arm/mach-kirkwood/d2net_v2-setup.c delete mode 100644 arch/arm/mach-kirkwood/include/mach/bridge-regs.h delete mode 100644 arch/arm/mach-kirkwood/include/mach/entry-macro.S delete mode 100644 arch/arm/mach-kirkwood/include/mach/hardware.h delete mode 100644 arch/arm/mach-kirkwood/include/mach/irqs.h delete mode 100644 arch/arm/mach-kirkwood/include/mach/kirkwood.h delete mode 100644 arch/arm/mach-kirkwood/include/mach/uncompress.h delete mode 100644 arch/arm/mach-kirkwood/irq.c delete mode 100644 arch/arm/mach-kirkwood/lacie_v2-common.c delete mode 100644 arch/arm/mach-kirkwood/lacie_v2-common.h delete mode 100644 arch/arm/mach-kirkwood/mpp.c delete mode 100644 arch/arm/mach-kirkwood/mpp.h delete mode 100644 arch/arm/mach-kirkwood/netxbig_v2-setup.c delete mode 100644 arch/arm/mach-kirkwood/openrd-setup.c delete mode 100644 arch/arm/mach-kirkwood/pcie.c delete mode 100644 arch/arm/mach-kirkwood/pm.c delete mode 100644 arch/arm/mach-kirkwood/pm.h delete mode 100644 arch/arm/mach-kirkwood/rd88f6192-nas-setup.c delete mode 100644 arch/arm/mach-kirkwood/rd88f6281-setup.c delete mode 100644 arch/arm/mach-kirkwood/t5325-setup.c delete mode 100644 arch/arm/mach-kirkwood/ts219-setup.c delete mode 100644 arch/arm/mach-kirkwood/ts41x-setup.c delete mode 100644 arch/arm/mach-kirkwood/tsx1x-common.c delete mode 100644 arch/arm/mach-kirkwood/tsx1x-common.h diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 87b63fde06d7..b20251ad7aa5 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -536,22 +536,6 @@ config ARCH_DOVE help Support for the Marvell Dove SoC 88AP510 -config ARCH_KIRKWOOD - bool "Marvell Kirkwood" - select ARCH_HAS_CPUFREQ - select ARCH_REQUIRE_GPIOLIB - select CPU_FEROCEON - select GENERIC_CLOCKEVENTS - select MVEBU_MBUS - select PCI - select PCI_QUIRKS - select PINCTRL - select PINCTRL_KIRKWOOD - select PLAT_ORION_LEGACY - help - Support for the following Marvell Kirkwood series SoCs: - 88F6180, 88F6192 and 88F6281. - config ARCH_MV78XX0 bool "Marvell MV78xx0" select ARCH_REQUIRE_GPIOLIB @@ -966,8 +950,6 @@ source "arch/arm/mach-ixp4xx/Kconfig" source "arch/arm/mach-keystone/Kconfig" -source "arch/arm/mach-kirkwood/Kconfig" - source "arch/arm/mach-ks8695/Kconfig" source "arch/arm/mach-msm/Kconfig" diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 8f90595069a1..20f49e9ad26e 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -1033,7 +1033,7 @@ config DEBUG_UART_8250 def_bool ARCH_DOVE || ARCH_EBSA110 || \ (FOOTBRIDGE && !DEBUG_DC21285_PORT) || \ ARCH_GEMINI || ARCH_IOP13XX || ARCH_IOP32X || \ - ARCH_IOP33X || ARCH_IXP4XX || ARCH_KIRKWOOD || \ + ARCH_IOP33X || ARCH_IXP4XX || \ ARCH_LPC32XX || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC config DEBUG_UART_PHYS @@ -1089,7 +1089,7 @@ config DEBUG_UART_PHYS default 0xe0000000 if ARCH_SPEAR13XX default 0xf0000be0 if ARCH_EBSA110 default 0xf1012000 if DEBUG_MVEBU_UART_ALTERNATE - default 0xf1012000 if ARCH_DOVE || ARCH_KIRKWOOD || ARCH_MV78XX0 || \ + default 0xf1012000 if ARCH_DOVE || ARCH_MV78XX0 || \ ARCH_ORION5X default 0xf7fc9000 if DEBUG_BERLIN_UART default 0xf8b00000 if DEBUG_HI3716_UART @@ -1154,7 +1154,6 @@ config DEBUG_UART_VIRT default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0 default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1 default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2 - default 0xfed12000 if ARCH_KIRKWOOD default 0xfed60000 if DEBUG_RK29_UART0 default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2 default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3 diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 6721fab13734..433a6f1b218f 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -163,7 +163,6 @@ machine-$(CONFIG_ARCH_IOP32X) += iop32x machine-$(CONFIG_ARCH_IOP33X) += iop33x machine-$(CONFIG_ARCH_IXP4XX) += ixp4xx machine-$(CONFIG_ARCH_KEYSTONE) += keystone -machine-$(CONFIG_ARCH_KIRKWOOD) += kirkwood machine-$(CONFIG_ARCH_KS8695) += ks8695 machine-$(CONFIG_ARCH_LPC32XX) += lpc32xx machine-$(CONFIG_ARCH_MMP) += mmp diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 5986ff63b901..025350ca96aa 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -90,8 +90,7 @@ dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \ dtb-$(CONFIG_ARCH_KEYSTONE) += k2hk-evm.dtb \ k2l-evm.dtb \ k2e-evm.dtb -kirkwood := \ - kirkwood-b3.dtb \ +dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-b3.dtb \ kirkwood-cloudbox.dtb \ kirkwood-db-88f6281.dtb \ kirkwood-db-88f6282.dtb \ @@ -150,8 +149,6 @@ kirkwood := \ kirkwood-ts219-6282.dtb \ kirkwood-ts419-6281.dtb \ kirkwood-ts419-6282.dtb -dtb-$(CONFIG_ARCH_KIRKWOOD) += $(kirkwood) -dtb-$(CONFIG_MACH_KIRKWOOD) += $(kirkwood) dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig deleted file mode 100644 index df4b26340ae4..000000000000 --- a/arch/arm/mach-kirkwood/Kconfig +++ /dev/null @@ -1,111 +0,0 @@ -if ARCH_KIRKWOOD - -menu "Marvell Kirkwood Implementations" - -config KIRKWOOD_LEGACY - bool - -config MACH_D2NET_V2 - bool "LaCie d2 Network v2 NAS Board" - select KIRKWOOD_LEGACY - help - Say 'Y' here if you want your kernel to support the - LaCie d2 Network v2 NAS. - -config MACH_NET2BIG_V2 - bool "LaCie 2Big Network v2 NAS Board" - select KIRKWOOD_LEGACY - help - Say 'Y' here if you want your kernel to support the - LaCie 2Big Network v2 NAS. - -config MACH_NET5BIG_V2 - bool "LaCie 5Big Network v2 NAS Board" - select KIRKWOOD_LEGACY - help - Say 'Y' here if you want your kernel to support the - LaCie 5Big Network v2 NAS. - -config MACH_OPENRD - select KIRKWOOD_LEGACY - bool - -config MACH_OPENRD_BASE - bool "Marvell OpenRD Base Board" - select MACH_OPENRD - help - Say 'Y' here if you want your kernel to support the - Marvell OpenRD Base Board. - -config MACH_OPENRD_CLIENT - bool "Marvell OpenRD Client Board" - select MACH_OPENRD - help - Say 'Y' here if you want your kernel to support the - Marvell OpenRD Client Board. - -config MACH_OPENRD_ULTIMATE - bool "Marvell OpenRD Ultimate Board" - select MACH_OPENRD - help - Say 'Y' here if you want your kernel to support the - Marvell OpenRD Ultimate Board. - -config MACH_RD88F6192_NAS - bool "Marvell RD-88F6192-NAS Reference Board" - select KIRKWOOD_LEGACY - help - Say 'Y' here if you want your kernel to support the - Marvell RD-88F6192-NAS Reference Board. - -config MACH_RD88F6281 - bool "Marvell RD-88F6281 Reference Board" - select KIRKWOOD_LEGACY - help - Say 'Y' here if you want your kernel to support the - Marvell RD-88F6281 Reference Board. - -config MACH_T5325 - bool "HP t5325 Thin Client" - select KIRKWOOD_LEGACY - help - Say 'Y' here if you want your kernel to support the - HP t5325 Thin Client. - -config MACH_TS219 - bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS" - select KIRKWOOD_LEGACY - help - Say 'Y' here if you want your kernel to support the - QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and - TS-219P+ Turbo NAS devices. - -config MACH_TS41X - bool "QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo NAS" - select KIRKWOOD_LEGACY - help - Say 'Y' here if you want your kernel to support the - QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo - NAS devices. - -comment "Device tree entries" - -config ARCH_KIRKWOOD_DT - bool "Marvell Kirkwood Flattened Device Tree" - select KIRKWOOD_CLK - select OF_IRQ - select ORION_IRQCHIP - select ORION_TIMER - select POWER_SUPPLY - select POWER_RESET - select POWER_RESET_GPIO - select REGULATOR - select REGULATOR_FIXED_VOLTAGE - select USE_OF - help - Say 'Y' here if you want your kernel to support the - Marvell Kirkwood using flattened device tree. - -endmenu - -endif diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile deleted file mode 100644 index 3a72c5c6e747..000000000000 --- a/arch/arm/mach-kirkwood/Makefile +++ /dev/null @@ -1,14 +0,0 @@ -obj-$(CONFIG_KIRKWOOD_LEGACY) += irq.o mpp.o common.o pcie.o -obj-$(CONFIG_PM) += pm.o - -obj-$(CONFIG_MACH_D2NET_V2) += d2net_v2-setup.o lacie_v2-common.o -obj-$(CONFIG_MACH_NET2BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o -obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o -obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o -obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6192-nas-setup.o -obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o -obj-$(CONFIG_MACH_T5325) += t5325-setup.o -obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o -obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o - -obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot deleted file mode 100644 index 760a0efe7580..000000000000 --- a/arch/arm/mach-kirkwood/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ - zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c deleted file mode 100644 index ff18ff20f71f..000000000000 --- a/arch/arm/mach-kirkwood/board-dt.c +++ /dev/null @@ -1,223 +0,0 @@ -/* - * Copyright 2012 (C), Jason Cooper - * - * arch/arm/mach-kirkwood/board-dt.c - * - * Flattened Device Tree board initialization - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "pm.h" - -static struct map_desc kirkwood_io_desc[] __initdata = { - { - .virtual = (unsigned long) KIRKWOOD_REGS_VIRT_BASE, - .pfn = __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE), - .length = KIRKWOOD_REGS_SIZE, - .type = MT_DEVICE, - }, -}; - -static void __init kirkwood_map_io(void) -{ - iotable_init(kirkwood_io_desc, ARRAY_SIZE(kirkwood_io_desc)); -} - -static struct resource kirkwood_cpufreq_resources[] = { - [0] = { - .start = CPU_CONTROL_PHYS, - .end = CPU_CONTROL_PHYS + 3, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device kirkwood_cpufreq_device = { - .name = "kirkwood-cpufreq", - .id = -1, - .num_resources = ARRAY_SIZE(kirkwood_cpufreq_resources), - .resource = kirkwood_cpufreq_resources, -}; - -static void __init kirkwood_cpufreq_init(void) -{ - platform_device_register(&kirkwood_cpufreq_device); -} - -static struct resource kirkwood_cpuidle_resource[] = { - { - .flags = IORESOURCE_MEM, - .start = DDR_OPERATION_BASE, - .end = DDR_OPERATION_BASE + 3, - }, -}; - -static struct platform_device kirkwood_cpuidle = { - .name = "kirkwood_cpuidle", - .id = -1, - .resource = kirkwood_cpuidle_resource, - .num_resources = 1, -}; - -static void __init kirkwood_cpuidle_init(void) -{ - platform_device_register(&kirkwood_cpuidle); -} - -/* Temporary here since mach-mvebu has a function we can use */ -static void kirkwood_restart(enum reboot_mode mode, const char *cmd) -{ - /* - * Enable soft reset to assert RSTOUTn. - */ - writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK); - - /* - * Assert soft reset. - */ - writel(SOFT_RESET, SYSTEM_SOFT_RESET); - - while (1) - ; -} - -#define MV643XX_ETH_MAC_ADDR_LOW 0x0414 -#define MV643XX_ETH_MAC_ADDR_HIGH 0x0418 - -static void __init kirkwood_dt_eth_fixup(void) -{ - struct device_node *np; - - /* - * The ethernet interfaces forget the MAC address assigned by u-boot - * if the clocks are turned off. Usually, u-boot on kirkwood boards - * has no DT support to properly set local-mac-address property. - * As a workaround, we get the MAC address from mv643xx_eth registers - * and update the port device node if no valid MAC address is set. - */ - for_each_compatible_node(np, NULL, "marvell,kirkwood-eth-port") { - struct device_node *pnp = of_get_parent(np); - struct clk *clk; - struct property *pmac; - void __iomem *io; - u8 *macaddr; - u32 reg; - - if (!pnp) - continue; - - /* skip disabled nodes or nodes with valid MAC address*/ - if (!of_device_is_available(pnp) || of_get_mac_address(np)) - goto eth_fixup_skip; - - clk = of_clk_get(pnp, 0); - if (IS_ERR(clk)) - goto eth_fixup_skip; - - io = of_iomap(pnp, 0); - if (!io) - goto eth_fixup_no_map; - - /* ensure port clock is not gated to not hang CPU */ - clk_prepare_enable(clk); - - /* store MAC address register contents in local-mac-address */ - pr_err(FW_INFO "%s: local-mac-address is not set\n", - np->full_name); - - pmac = kzalloc(sizeof(*pmac) + 6, GFP_KERNEL); - if (!pmac) - goto eth_fixup_no_mem; - - pmac->value = pmac + 1; - pmac->length = 6; - pmac->name = kstrdup("local-mac-address", GFP_KERNEL); - if (!pmac->name) { - kfree(pmac); - goto eth_fixup_no_mem; - } - - macaddr = pmac->value; - reg = readl(io + MV643XX_ETH_MAC_ADDR_HIGH); - macaddr[0] = (reg >> 24) & 0xff; - macaddr[1] = (reg >> 16) & 0xff; - macaddr[2] = (reg >> 8) & 0xff; - macaddr[3] = reg & 0xff; - - reg = readl(io + MV643XX_ETH_MAC_ADDR_LOW); - macaddr[4] = (reg >> 8) & 0xff; - macaddr[5] = reg & 0xff; - - of_update_property(np, pmac); - -eth_fixup_no_mem: - iounmap(io); - clk_disable_unprepare(clk); -eth_fixup_no_map: - clk_put(clk); -eth_fixup_skip: - of_node_put(pnp); - } -} - -/* - * Disable propagation of mbus errors to the CPU local bus, as this - * causes mbus errors (which can occur for example for PCI aborts) to - * throw CPU aborts, which we're not set up to deal with. - */ -static void __init kirkwood_disable_mbus_error_propagation(void) -{ - void __iomem *cpu_config; - - cpu_config = ioremap(CPU_CONFIG_PHYS, 4); - writel(readl(cpu_config) & ~CPU_CONFIG_ERROR_PROP, cpu_config); - iounmap(cpu_config); -} - -static void __init kirkwood_dt_init(void) -{ - kirkwood_disable_mbus_error_propagation(); - - BUG_ON(mvebu_mbus_dt_init(false)); - -#ifdef CONFIG_CACHE_FEROCEON_L2 - feroceon_of_init(); -#endif - kirkwood_cpufreq_init(); - kirkwood_cpuidle_init(); - - kirkwood_pm_init(); - kirkwood_dt_eth_fixup(); - - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} - -static const char * const kirkwood_dt_board_compat[] = { - "marvell,kirkwood", - NULL -}; - -DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)") - /* Maintainer: Jason Cooper */ - .map_io = kirkwood_map_io, - .init_machine = kirkwood_dt_init, - .restart = kirkwood_restart, - .dt_compat = kirkwood_dt_board_compat, -MACHINE_END diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c deleted file mode 100644 index 255f33a3903c..000000000000 --- a/arch/arm/mach-kirkwood/common.c +++ /dev/null @@ -1,746 +0,0 @@ -/* - * arch/arm/mach-kirkwood/common.c - * - * Core functions for Marvell Kirkwood SoCs - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "common.h" -#include "pm.h" - -/* These can go away once Kirkwood uses the mvebu-mbus DT binding */ -#define KIRKWOOD_MBUS_NAND_TARGET 0x01 -#define KIRKWOOD_MBUS_NAND_ATTR 0x2f -#define KIRKWOOD_MBUS_SRAM_TARGET 0x03 -#define KIRKWOOD_MBUS_SRAM_ATTR 0x01 - -/***************************************************************************** - * I/O Address Mapping - ****************************************************************************/ -static struct map_desc kirkwood_io_desc[] __initdata = { - { - .virtual = (unsigned long) KIRKWOOD_REGS_VIRT_BASE, - .pfn = __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE), - .length = KIRKWOOD_REGS_SIZE, - .type = MT_DEVICE, - }, -}; - -void __init kirkwood_map_io(void) -{ - iotable_init(kirkwood_io_desc, ARRAY_SIZE(kirkwood_io_desc)); -} - -/***************************************************************************** - * CLK tree - ****************************************************************************/ - -static void enable_sata0(void) -{ - /* Enable PLL and IVREF */ - writel(readl(SATA0_PHY_MODE_2) | 0xf, SATA0_PHY_MODE_2); - /* Enable PHY */ - writel(readl(SATA0_IF_CTRL) & ~0x200, SATA0_IF_CTRL); -} - -static void disable_sata0(void) -{ - /* Disable PLL and IVREF */ - writel(readl(SATA0_PHY_MODE_2) & ~0xf, SATA0_PHY_MODE_2); - /* Disable PHY */ - writel(readl(SATA0_IF_CTRL) | 0x200, SATA0_IF_CTRL); -} - -static void enable_sata1(void) -{ - /* Enable PLL and IVREF */ - writel(readl(SATA1_PHY_MODE_2) | 0xf, SATA1_PHY_MODE_2); - /* Enable PHY */ - writel(readl(SATA1_IF_CTRL) & ~0x200, SATA1_IF_CTRL); -} - -static void disable_sata1(void) -{ - /* Disable PLL and IVREF */ - writel(readl(SATA1_PHY_MODE_2) & ~0xf, SATA1_PHY_MODE_2); - /* Disable PHY */ - writel(readl(SATA1_IF_CTRL) | 0x200, SATA1_IF_CTRL); -} - -static void disable_pcie0(void) -{ - writel(readl(PCIE_LINK_CTRL) | 0x10, PCIE_LINK_CTRL); - while (1) - if (readl(PCIE_STATUS) & 0x1) - break; - writel(readl(PCIE_LINK_CTRL) & ~0x10, PCIE_LINK_CTRL); -} - -static void disable_pcie1(void) -{ - u32 dev, rev; - - kirkwood_pcie_id(&dev, &rev); - - if (dev == MV88F6282_DEV_ID) { - writel(readl(PCIE1_LINK_CTRL) | 0x10, PCIE1_LINK_CTRL); - while (1) - if (readl(PCIE1_STATUS) & 0x1) - break; - writel(readl(PCIE1_LINK_CTRL) & ~0x10, PCIE1_LINK_CTRL); - } -} - -/* An extended version of the gated clk. This calls fn_en()/fn_dis - * before enabling/disabling the clock. We use this to turn on/off - * PHYs etc. */ -struct clk_gate_fn { - struct clk_gate gate; - void (*fn_en)(void); - void (*fn_dis)(void); -}; - -#define to_clk_gate_fn(_gate) container_of(_gate, struct clk_gate_fn, gate) -#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw) - -static int clk_gate_fn_enable(struct clk_hw *hw) -{ - struct clk_gate *gate = to_clk_gate(hw); - struct clk_gate_fn *gate_fn = to_clk_gate_fn(gate); - int ret; - - ret = clk_gate_ops.enable(hw); - if (!ret && gate_fn->fn_en) - gate_fn->fn_en(); - - return ret; -} - -static void clk_gate_fn_disable(struct clk_hw *hw) -{ - struct clk_gate *gate = to_clk_gate(hw); - struct clk_gate_fn *gate_fn = to_clk_gate_fn(gate); - - if (gate_fn->fn_dis) - gate_fn->fn_dis(); - - clk_gate_ops.disable(hw); -} - -static struct clk_ops clk_gate_fn_ops; - -static struct clk __init *clk_register_gate_fn(struct device *dev, - const char *name, - const char *parent_name, unsigned long flags, - void __iomem *reg, u8 bit_idx, - u8 clk_gate_flags, spinlock_t *lock, - void (*fn_en)(void), void (*fn_dis)(void)) -{ - struct clk_gate_fn *gate_fn; - struct clk *clk; - struct clk_init_data init; - - gate_fn = kzalloc(sizeof(struct clk_gate_fn), GFP_KERNEL); - if (!gate_fn) { - pr_err("%s: could not allocate gated clk\n", __func__); - return ERR_PTR(-ENOMEM); - } - - init.name = name; - init.ops = &clk_gate_fn_ops; - init.flags = flags; - init.parent_names = (parent_name ? &parent_name : NULL); - init.num_parents = (parent_name ? 1 : 0); - - /* struct clk_gate assignments */ - gate_fn->gate.reg = reg; - gate_fn->gate.bit_idx = bit_idx; - gate_fn->gate.flags = clk_gate_flags; - gate_fn->gate.lock = lock; - gate_fn->gate.hw.init = &init; - gate_fn->fn_en = fn_en; - gate_fn->fn_dis = fn_dis; - - /* ops is the gate ops, but with our enable/disable functions */ - if (clk_gate_fn_ops.enable != clk_gate_fn_enable || - clk_gate_fn_ops.disable != clk_gate_fn_disable) { - clk_gate_fn_ops = clk_gate_ops; - clk_gate_fn_ops.enable = clk_gate_fn_enable; - clk_gate_fn_ops.disable = clk_gate_fn_disable; - } - - clk = clk_register(dev, &gate_fn->gate.hw); - - if (IS_ERR(clk)) - kfree(gate_fn); - - return clk; -} - -static DEFINE_SPINLOCK(gating_lock); -static struct clk *tclk; - -static struct clk __init *kirkwood_register_gate(const char *name, u8 bit_idx) -{ - return clk_register_gate(NULL, name, "tclk", 0, CLOCK_GATING_CTRL, - bit_idx, 0, &gating_lock); -} - -static struct clk __init *kirkwood_register_gate_fn(const char *name, - u8 bit_idx, - void (*fn_en)(void), - void (*fn_dis)(void)) -{ - return clk_register_gate_fn(NULL, name, "tclk", 0, CLOCK_GATING_CTRL, - bit_idx, 0, &gating_lock, fn_en, fn_dis); -} - -static struct clk *ge0, *ge1; - -void __init kirkwood_clk_init(void) -{ - struct clk *runit, *sata0, *sata1, *usb0, *sdio; - struct clk *crypto, *xor0, *xor1, *pex0, *pex1, *audio; - - tclk = clk_register_fixed_rate(NULL, "tclk", NULL, - CLK_IS_ROOT, kirkwood_tclk); - - runit = kirkwood_register_gate("runit", CGC_BIT_RUNIT); - ge0 = kirkwood_register_gate("ge0", CGC_BIT_GE0); - ge1 = kirkwood_register_gate("ge1", CGC_BIT_GE1); - sata0 = kirkwood_register_gate_fn("sata0", CGC_BIT_SATA0, - enable_sata0, disable_sata0); - sata1 = kirkwood_register_gate_fn("sata1", CGC_BIT_SATA1, - enable_sata1, disable_sata1); - usb0 = kirkwood_register_gate("usb0", CGC_BIT_USB0); - sdio = kirkwood_register_gate("sdio", CGC_BIT_SDIO); - crypto = kirkwood_register_gate("crypto", CGC_BIT_CRYPTO); - xor0 = kirkwood_register_gate("xor0", CGC_BIT_XOR0); - xor1 = kirkwood_register_gate("xor1", CGC_BIT_XOR1); - pex0 = kirkwood_register_gate_fn("pex0", CGC_BIT_PEX0, - NULL, disable_pcie0); - pex1 = kirkwood_register_gate_fn("pex1", CGC_BIT_PEX1, - NULL, disable_pcie1); - audio = kirkwood_register_gate("audio", CGC_BIT_AUDIO); - kirkwood_register_gate("tdm", CGC_BIT_TDM); - kirkwood_register_gate("tsu", CGC_BIT_TSU); - - /* clkdev entries, mapping clks to devices */ - orion_clkdev_add(NULL, "orion_spi.0", runit); - orion_clkdev_add(NULL, "orion_spi.1", runit); - orion_clkdev_add(NULL, MV643XX_ETH_NAME ".0", ge0); - orion_clkdev_add(NULL, MV643XX_ETH_NAME ".1", ge1); - orion_clkdev_add(NULL, "orion_wdt", tclk); - orion_clkdev_add("0", "sata_mv.0", sata0); - orion_clkdev_add("1", "sata_mv.0", sata1); - orion_clkdev_add(NULL, "orion-ehci.0", usb0); - orion_clkdev_add(NULL, "orion_nand", runit); - orion_clkdev_add(NULL, "mvsdio", sdio); - orion_clkdev_add(NULL, "mv_crypto", crypto); - orion_clkdev_add(NULL, MV_XOR_NAME ".0", xor0); - orion_clkdev_add(NULL, MV_XOR_NAME ".1", xor1); - orion_clkdev_add("0", "pcie", pex0); - orion_clkdev_add("1", "pcie", pex1); - orion_clkdev_add(NULL, "mvebu-audio", audio); - orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".0", runit); - orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".1", runit); - - /* Marvell says runit is used by SPI, UART, NAND, TWSI, ..., - * so should never be gated. - */ - clk_prepare_enable(runit); -} - -/***************************************************************************** - * EHCI0 - ****************************************************************************/ -void __init kirkwood_ehci_init(void) -{ - orion_ehci_init(USB_PHYS_BASE, IRQ_KIRKWOOD_USB, EHCI_PHY_NA); -} - - -/***************************************************************************** - * GE00 - ****************************************************************************/ -void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data) -{ - orion_ge00_init(eth_data, - GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM, - IRQ_KIRKWOOD_GE00_ERR, 1600); - /* The interface forgets the MAC address assigned by u-boot if - the clock is turned off, so claim the clk now. */ - clk_prepare_enable(ge0); -} - - -/***************************************************************************** - * GE01 - ****************************************************************************/ -void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data) -{ - orion_ge01_init(eth_data, - GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM, - IRQ_KIRKWOOD_GE01_ERR, 1600); - clk_prepare_enable(ge1); -} - - -/***************************************************************************** - * Ethernet switch - ****************************************************************************/ -void __init kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq) -{ - orion_ge00_switch_init(d, irq); -} - - -/***************************************************************************** - * NAND flash - ****************************************************************************/ -static struct resource kirkwood_nand_resource = { - .flags = IORESOURCE_MEM, - .start = KIRKWOOD_NAND_MEM_PHYS_BASE, - .end = KIRKWOOD_NAND_MEM_PHYS_BASE + - KIRKWOOD_NAND_MEM_SIZE - 1, -}; - -static struct orion_nand_data kirkwood_nand_data = { - .cle = 0, - .ale = 1, - .width = 8, -}; - -static struct platform_device kirkwood_nand_flash = { - .name = "orion_nand", - .id = -1, - .dev = { - .platform_data = &kirkwood_nand_data, - }, - .resource = &kirkwood_nand_resource, - .num_resources = 1, -}; - -void __init kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, - int chip_delay) -{ - kirkwood_nand_data.parts = parts; - kirkwood_nand_data.nr_parts = nr_parts; - kirkwood_nand_data.chip_delay = chip_delay; - platform_device_register(&kirkwood_nand_flash); -} - -void __init kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts, - int (*dev_ready)(struct mtd_info *)) -{ - kirkwood_nand_data.parts = parts; - kirkwood_nand_data.nr_parts = nr_parts; - kirkwood_nand_data.dev_ready = dev_ready; - platform_device_register(&kirkwood_nand_flash); -} - -/***************************************************************************** - * SoC RTC - ****************************************************************************/ -static void __init kirkwood_rtc_init(void) -{ - orion_rtc_init(RTC_PHYS_BASE, IRQ_KIRKWOOD_RTC); -} - - -/***************************************************************************** - * SATA - ****************************************************************************/ -void __init kirkwood_sata_init(struct mv_sata_platform_data *sata_data) -{ - orion_sata_init(sata_data, SATA_PHYS_BASE, IRQ_KIRKWOOD_SATA); -} - - -/***************************************************************************** - * SD/SDIO/MMC - ****************************************************************************/ -static struct resource mvsdio_resources[] = { - [0] = { - .start = SDIO_PHYS_BASE, - .end = SDIO_PHYS_BASE + SZ_1K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_KIRKWOOD_SDIO, - .end = IRQ_KIRKWOOD_SDIO, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 mvsdio_dmamask = DMA_BIT_MASK(32); - -static struct platform_device kirkwood_sdio = { - .name = "mvsdio", - .id = -1, - .dev = { - .dma_mask = &mvsdio_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .num_resources = ARRAY_SIZE(mvsdio_resources), - .resource = mvsdio_resources, -}; - -void __init kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data) -{ - u32 dev, rev; - - kirkwood_pcie_id(&dev, &rev); - if (rev == 0 && dev != MV88F6282_DEV_ID) /* catch all Kirkwood Z0's */ - mvsdio_data->clock = 100000000; - else - mvsdio_data->clock = 200000000; - kirkwood_sdio.dev.platform_data = mvsdio_data; - platform_device_register(&kirkwood_sdio); -} - - -/***************************************************************************** - * SPI - ****************************************************************************/ -void __init kirkwood_spi_init(void) -{ - orion_spi_init(SPI_PHYS_BASE); -} - - -/***************************************************************************** - * I2C - ****************************************************************************/ -void __init kirkwood_i2c_init(void) -{ - orion_i2c_init(I2C_PHYS_BASE, IRQ_KIRKWOOD_TWSI, 8); -} - - -/***************************************************************************** - * UART0 - ****************************************************************************/ - -void __init kirkwood_uart0_init(void) -{ - orion_uart0_init(UART0_VIRT_BASE, UART0_PHYS_BASE, - IRQ_KIRKWOOD_UART_0, tclk); -} - - -/***************************************************************************** - * UART1 - ****************************************************************************/ -void __init kirkwood_uart1_init(void) -{ - orion_uart1_init(UART1_VIRT_BASE, UART1_PHYS_BASE, - IRQ_KIRKWOOD_UART_1, tclk); -} - -/***************************************************************************** - * Cryptographic Engines and Security Accelerator (CESA) - ****************************************************************************/ -void __init kirkwood_crypto_init(void) -{ - orion_crypto_init(CRYPTO_PHYS_BASE, KIRKWOOD_SRAM_PHYS_BASE, - KIRKWOOD_SRAM_SIZE, IRQ_KIRKWOOD_CRYPTO); -} - - -/***************************************************************************** - * XOR0 - ****************************************************************************/ -void __init kirkwood_xor0_init(void) -{ - orion_xor0_init(XOR0_PHYS_BASE, XOR0_HIGH_PHYS_BASE, - IRQ_KIRKWOOD_XOR_00, IRQ_KIRKWOOD_XOR_01); -} - - -/***************************************************************************** - * XOR1 - ****************************************************************************/ -void __init kirkwood_xor1_init(void) -{ - orion_xor1_init(XOR1_PHYS_BASE, XOR1_HIGH_PHYS_BASE, - IRQ_KIRKWOOD_XOR_10, IRQ_KIRKWOOD_XOR_11); -} - - -/***************************************************************************** - * Watchdog - ****************************************************************************/ -void __init kirkwood_wdt_init(void) -{ - orion_wdt_init(); -} - -/***************************************************************************** - * CPU idle - ****************************************************************************/ -static struct resource kirkwood_cpuidle_resource[] = { - { - .flags = IORESOURCE_MEM, - .start = DDR_OPERATION_BASE, - .end = DDR_OPERATION_BASE + 3, - }, -}; - -static struct platform_device kirkwood_cpuidle = { - .name = "kirkwood_cpuidle", - .id = -1, - .resource = kirkwood_cpuidle_resource, - .num_resources = 1, -}; - -void __init kirkwood_cpuidle_init(void) -{ - platform_device_register(&kirkwood_cpuidle); -} - -/***************************************************************************** - * Time handling - ****************************************************************************/ -void __init kirkwood_init_early(void) -{ - orion_time_set_base(TIMER_VIRT_BASE); -} - -int kirkwood_tclk; - -static int __init kirkwood_find_tclk(void) -{ - u32 dev, rev; - - kirkwood_pcie_id(&dev, &rev); - - if (dev == MV88F6281_DEV_ID || dev == MV88F6282_DEV_ID) - if (((readl(SAMPLE_AT_RESET) >> 21) & 1) == 0) - return 200000000; - - return 166666667; -} - -void __init kirkwood_timer_init(void) -{ - kirkwood_tclk = kirkwood_find_tclk(); - - orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR, - IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk); -} - -/***************************************************************************** - * Audio - ****************************************************************************/ -static struct resource kirkwood_audio_resources[] = { - [0] = { - .start = AUDIO_PHYS_BASE, - .end = AUDIO_PHYS_BASE + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_KIRKWOOD_I2S, - .end = IRQ_KIRKWOOD_I2S, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct kirkwood_asoc_platform_data kirkwood_audio_data = { - .burst = 128, -}; - -static struct platform_device kirkwood_audio_device = { - .name = "mvebu-audio", - .id = -1, - .num_resources = ARRAY_SIZE(kirkwood_audio_resources), - .resource = kirkwood_audio_resources, - .dev = { - .platform_data = &kirkwood_audio_data, - }, -}; - -void __init kirkwood_audio_init(void) -{ - platform_device_register(&kirkwood_audio_device); -} - -/***************************************************************************** - * CPU Frequency - ****************************************************************************/ -static struct resource kirkwood_cpufreq_resources[] = { - [0] = { - .start = CPU_CONTROL_PHYS, - .end = CPU_CONTROL_PHYS + 3, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device kirkwood_cpufreq_device = { - .name = "kirkwood-cpufreq", - .id = -1, - .num_resources = ARRAY_SIZE(kirkwood_cpufreq_resources), - .resource = kirkwood_cpufreq_resources, -}; - -void __init kirkwood_cpufreq_init(void) -{ - platform_device_register(&kirkwood_cpufreq_device); -} - -/***************************************************************************** - * General - ****************************************************************************/ -/* - * Identify device ID and revision. - */ -char * __init kirkwood_id(void) -{ - u32 dev, rev; - - kirkwood_pcie_id(&dev, &rev); - - if (dev == MV88F6281_DEV_ID) { - if (rev == MV88F6281_REV_Z0) - return "MV88F6281-Z0"; - else if (rev == MV88F6281_REV_A0) - return "MV88F6281-A0"; - else if (rev == MV88F6281_REV_A1) - return "MV88F6281-A1"; - else - return "MV88F6281-Rev-Unsupported"; - } else if (dev == MV88F6192_DEV_ID) { - if (rev == MV88F6192_REV_Z0) - return "MV88F6192-Z0"; - else if (rev == MV88F6192_REV_A0) - return "MV88F6192-A0"; - else if (rev == MV88F6192_REV_A1) - return "MV88F6192-A1"; - else - return "MV88F6192-Rev-Unsupported"; - } else if (dev == MV88F6180_DEV_ID) { - if (rev == MV88F6180_REV_A0) - return "MV88F6180-Rev-A0"; - else if (rev == MV88F6180_REV_A1) - return "MV88F6180-Rev-A1"; - else - return "MV88F6180-Rev-Unsupported"; - } else if (dev == MV88F6282_DEV_ID) { - if (rev == MV88F6282_REV_A0) - return "MV88F6282-Rev-A0"; - else if (rev == MV88F6282_REV_A1) - return "MV88F6282-Rev-A1"; - else - return "MV88F6282-Rev-Unsupported"; - } else { - return "Device-Unknown"; - } -} - -void __init kirkwood_setup_wins(void) -{ - mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_NAND_TARGET, - KIRKWOOD_MBUS_NAND_ATTR, - KIRKWOOD_NAND_MEM_PHYS_BASE, - KIRKWOOD_NAND_MEM_SIZE); - mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_SRAM_TARGET, - KIRKWOOD_MBUS_SRAM_ATTR, - KIRKWOOD_SRAM_PHYS_BASE, - KIRKWOOD_SRAM_SIZE); -} - -void __init kirkwood_l2_init(void) -{ -#ifdef CONFIG_CACHE_FEROCEON_L2 -#ifdef CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH - writel(readl(L2_CONFIG_REG) | L2_WRITETHROUGH, L2_CONFIG_REG); - feroceon_l2_init(1); -#else - writel(readl(L2_CONFIG_REG) & ~L2_WRITETHROUGH, L2_CONFIG_REG); - feroceon_l2_init(0); -#endif -#endif -} - -void __init kirkwood_init(void) -{ - pr_info("Kirkwood: %s, TCLK=%d.\n", kirkwood_id(), kirkwood_tclk); - - /* - * Disable propagation of mbus errors to the CPU local bus, - * as this causes mbus errors (which can occur for example - * for PCI aborts) to throw CPU aborts, which we're not set - * up to deal with. - */ - writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG); - - BUG_ON(mvebu_mbus_init("marvell,kirkwood-mbus", - BRIDGE_WINS_BASE, BRIDGE_WINS_SZ, - DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ)); - - kirkwood_setup_wins(); - - kirkwood_l2_init(); - - /* Setup root of clk tree */ - kirkwood_clk_init(); - - /* internal devices that every board has */ - kirkwood_rtc_init(); - kirkwood_wdt_init(); - kirkwood_xor0_init(); - kirkwood_xor1_init(); - kirkwood_crypto_init(); - - kirkwood_pm_init(); - kirkwood_cpuidle_init(); -#ifdef CONFIG_KEXEC - kexec_reinit = kirkwood_enable_pcie; -#endif -} - -void kirkwood_restart(enum reboot_mode mode, const char *cmd) -{ - /* - * Enable soft reset to assert RSTOUTn. - */ - writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK); - - /* - * Assert soft reset. - */ - writel(SOFT_RESET, SYSTEM_SOFT_RESET); - - while (1) - ; -} diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h deleted file mode 100644 index 832a4e2ab8d7..000000000000 --- a/arch/arm/mach-kirkwood/common.h +++ /dev/null @@ -1,74 +0,0 @@ -/* - * arch/arm/mach-kirkwood/common.h - * - * Core functions for Marvell Kirkwood SoCs - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ARCH_KIRKWOOD_COMMON_H -#define __ARCH_KIRKWOOD_COMMON_H - -#include - -struct dsa_platform_data; -struct mv643xx_eth_platform_data; -struct mv_sata_platform_data; -struct mvsdio_platform_data; -struct mtd_partition; -struct mtd_info; -struct kirkwood_asoc_platform_data; - -#define KW_PCIE0 (1 << 0) -#define KW_PCIE1 (1 << 1) - -/* - * Basic Kirkwood init functions used early by machine-setup. - */ -void kirkwood_map_io(void); -void kirkwood_init(void); -void kirkwood_init_early(void); -void kirkwood_init_irq(void); - -void kirkwood_setup_wins(void); - -void kirkwood_enable_pcie(void); -void kirkwood_pcie_id(u32 *dev, u32 *rev); - -void kirkwood_ehci_init(void); -void kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data); -void kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data); -void kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq); -void kirkwood_pcie_init(unsigned int portmask); -void kirkwood_sata_init(struct mv_sata_platform_data *sata_data); -void kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data); -void kirkwood_spi_init(void); -void kirkwood_i2c_init(void); -void kirkwood_uart0_init(void); -void kirkwood_uart1_init(void); -void kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, int delay); -void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts, - int (*dev_ready)(struct mtd_info *)); -void kirkwood_audio_init(void); -void kirkwood_cpuidle_init(void); -void kirkwood_cpufreq_init(void); - -void kirkwood_restart(enum reboot_mode, const char *); -void kirkwood_clk_init(void); - -/* early init functions not converted to fdt yet */ -char *kirkwood_id(void); -void kirkwood_l2_init(void); -void kirkwood_wdt_init(void); -void kirkwood_xor0_init(void); -void kirkwood_xor1_init(void); -void kirkwood_crypto_init(void); - -extern int kirkwood_tclk; -extern void kirkwood_timer_init(void); - -#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) - -#endif diff --git a/arch/arm/mach-kirkwood/d2net_v2-setup.c b/arch/arm/mach-kirkwood/d2net_v2-setup.c deleted file mode 100644 index 453418063c1e..000000000000 --- a/arch/arm/mach-kirkwood/d2net_v2-setup.c +++ /dev/null @@ -1,231 +0,0 @@ -/* - * arch/arm/mach-kirkwood/d2net_v2-setup.c - * - * LaCie d2 Network Space v2 Board Setup - * - * Copyright (C) 2010 Simon Guinot - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "common.h" -#include "mpp.h" -#include "lacie_v2-common.h" - -/***************************************************************************** - * Ethernet - ****************************************************************************/ - -static struct mv643xx_eth_platform_data d2net_v2_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - -/***************************************************************************** - * SATA - ****************************************************************************/ - -static struct mv_sata_platform_data d2net_v2_sata_data = { - .n_ports = 2, -}; - -/***************************************************************************** - * GPIO keys - ****************************************************************************/ - -#define D2NET_V2_GPIO_PUSH_BUTTON 34 -#define D2NET_V2_GPIO_POWER_SWITCH_ON 13 -#define D2NET_V2_GPIO_POWER_SWITCH_OFF 15 - -#define D2NET_V2_SWITCH_POWER_ON 0x1 -#define D2NET_V2_SWITCH_POWER_OFF 0x2 - -static struct gpio_keys_button d2net_v2_buttons[] = { - [0] = { - .type = EV_SW, - .code = D2NET_V2_SWITCH_POWER_ON, - .gpio = D2NET_V2_GPIO_POWER_SWITCH_ON, - .desc = "Back power switch (on|auto)", - .active_low = 0, - }, - [1] = { - .type = EV_SW, - .code = D2NET_V2_SWITCH_POWER_OFF, - .gpio = D2NET_V2_GPIO_POWER_SWITCH_OFF, - .desc = "Back power switch (auto|off)", - .active_low = 0, - }, - [2] = { - .code = KEY_POWER, - .gpio = D2NET_V2_GPIO_PUSH_BUTTON, - .desc = "Front Push Button", - .active_low = 1, - }, -}; - -static struct gpio_keys_platform_data d2net_v2_button_data = { - .buttons = d2net_v2_buttons, - .nbuttons = ARRAY_SIZE(d2net_v2_buttons), -}; - -static struct platform_device d2net_v2_gpio_buttons = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &d2net_v2_button_data, - }, -}; - -/***************************************************************************** - * GPIO LEDs - ****************************************************************************/ - -#define D2NET_V2_GPIO_RED_LED 12 - -static struct gpio_led d2net_v2_gpio_led_pins[] = { - { - .name = "d2net_v2:red:fail", - .gpio = D2NET_V2_GPIO_RED_LED, - }, -}; - -static struct gpio_led_platform_data d2net_v2_gpio_leds_data = { - .num_leds = ARRAY_SIZE(d2net_v2_gpio_led_pins), - .leds = d2net_v2_gpio_led_pins, -}; - -static struct platform_device d2net_v2_gpio_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &d2net_v2_gpio_leds_data, - }, -}; - -/***************************************************************************** - * Dual-GPIO CPLD LEDs - ****************************************************************************/ - -#define D2NET_V2_GPIO_BLUE_LED_SLOW 29 -#define D2NET_V2_GPIO_BLUE_LED_CMD 30 - -static struct ns2_led d2net_v2_led_pins[] = { - { - .name = "d2net_v2:blue:sata", - .cmd = D2NET_V2_GPIO_BLUE_LED_CMD, - .slow = D2NET_V2_GPIO_BLUE_LED_SLOW, - }, -}; - -static struct ns2_led_platform_data d2net_v2_leds_data = { - .num_leds = ARRAY_SIZE(d2net_v2_led_pins), - .leds = d2net_v2_led_pins, -}; - -static struct platform_device d2net_v2_leds = { - .name = "leds-ns2", - .id = -1, - .dev = { - .platform_data = &d2net_v2_leds_data, - }, -}; - -/***************************************************************************** - * General Setup - ****************************************************************************/ - -static unsigned int d2net_v2_mpp_config[] __initdata = { - MPP0_SPI_SCn, - MPP1_SPI_MOSI, - MPP2_SPI_SCK, - MPP3_SPI_MISO, - MPP6_SYSRST_OUTn, - MPP7_GPO, /* Request power-off */ - MPP8_TW0_SDA, - MPP9_TW0_SCK, - MPP10_UART0_TXD, - MPP11_UART0_RXD, - MPP12_GPO, /* Red led */ - MPP13_GPIO, /* Rear power switch (on|auto) */ - MPP14_GPIO, /* USB fuse */ - MPP15_GPIO, /* Rear power switch (auto|off) */ - MPP16_GPIO, /* SATA 0 power */ - MPP21_SATA0_ACTn, - MPP24_GPIO, /* USB mode select */ - MPP26_GPIO, /* USB device vbus */ - MPP28_GPIO, /* USB enable host vbus */ - MPP29_GPIO, /* Blue led (slow register) */ - MPP30_GPIO, /* Blue led (command register) */ - MPP34_GPIO, /* Power button (1 = Released, 0 = Pushed) */ - MPP35_GPIO, /* Inhibit power-off */ - 0 -}; - -#define D2NET_V2_GPIO_POWER_OFF 7 - -static void d2net_v2_power_off(void) -{ - gpio_set_value(D2NET_V2_GPIO_POWER_OFF, 1); -} - -static void __init d2net_v2_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_init(); - kirkwood_mpp_conf(d2net_v2_mpp_config); - - lacie_v2_hdd_power_init(1); - - kirkwood_ehci_init(); - kirkwood_ge00_init(&d2net_v2_ge00_data); - kirkwood_sata_init(&d2net_v2_sata_data); - kirkwood_uart0_init(); - lacie_v2_register_flash(); - lacie_v2_register_i2c_devices(); - - platform_device_register(&d2net_v2_leds); - platform_device_register(&d2net_v2_gpio_leds); - platform_device_register(&d2net_v2_gpio_buttons); - - if (gpio_request(D2NET_V2_GPIO_POWER_OFF, "power-off") == 0 && - gpio_direction_output(D2NET_V2_GPIO_POWER_OFF, 0) == 0) - pm_power_off = d2net_v2_power_off; - else - pr_err("d2net_v2: failed to configure power-off GPIO\n"); -} - -MACHINE_START(D2NET_V2, "LaCie d2 Network v2") - .atag_offset = 0x100, - .init_machine = d2net_v2_init, - .map_io = kirkwood_map_io, - .init_early = kirkwood_init_early, - .init_irq = kirkwood_init_irq, - .init_time = kirkwood_timer_init, - .restart = kirkwood_restart, -MACHINE_END diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h deleted file mode 100644 index 1c37082c8b39..000000000000 --- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h +++ /dev/null @@ -1,86 +0,0 @@ -/* - * arch/arm/mach-kirkwood/include/mach/bridge-regs.h - * - * Mbus-L to Mbus Bridge Registers - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_BRIDGE_REGS_H -#define __ASM_ARCH_BRIDGE_REGS_H - -#include - -#define CPU_CONFIG (BRIDGE_VIRT_BASE + 0x0100) -#define CPU_CONFIG_PHYS (BRIDGE_PHYS_BASE + 0x0100) -#define CPU_CONFIG_ERROR_PROP 0x00000004 - -#define CPU_CONTROL (BRIDGE_VIRT_BASE + 0x0104) -#define CPU_CONTROL_PHYS (BRIDGE_PHYS_BASE + 0x0104) -#define CPU_RESET 0x00000002 - -#define RSTOUTn_MASK (BRIDGE_VIRT_BASE + 0x0108) -#define RSTOUTn_MASK_PHYS (BRIDGE_PHYS_BASE + 0x0108) -#define SOFT_RESET_OUT_EN 0x00000004 - -#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE + 0x010c) -#define SOFT_RESET 0x00000001 - -#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE + 0x0110) - -#define BRIDGE_INT_TIMER1_CLR (~0x0004) - -#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0200) -#define IRQ_CAUSE_LOW_OFF 0x0000 -#define IRQ_MASK_LOW_OFF 0x0004 -#define IRQ_CAUSE_HIGH_OFF 0x0010 -#define IRQ_MASK_HIGH_OFF 0x0014 - -#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0300) -#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE + 0x0300) - -#define L2_CONFIG_REG (BRIDGE_VIRT_BASE + 0x0128) -#define L2_WRITETHROUGH 0x00000010 - -#define CLOCK_GATING_CTRL (BRIDGE_VIRT_BASE + 0x11c) -#define CGC_BIT_GE0 (0) -#define CGC_BIT_PEX0 (2) -#define CGC_BIT_USB0 (3) -#define CGC_BIT_SDIO (4) -#define CGC_BIT_TSU (5) -#define CGC_BIT_DUNIT (6) -#define CGC_BIT_RUNIT (7) -#define CGC_BIT_XOR0 (8) -#define CGC_BIT_AUDIO (9) -#define CGC_BIT_SATA0 (14) -#define CGC_BIT_SATA1 (15) -#define CGC_BIT_XOR1 (16) -#define CGC_BIT_CRYPTO (17) -#define CGC_BIT_PEX1 (18) -#define CGC_BIT_GE1 (19) -#define CGC_BIT_TDM (20) -#define CGC_GE0 (1 << 0) -#define CGC_PEX0 (1 << 2) -#define CGC_USB0 (1 << 3) -#define CGC_SDIO (1 << 4) -#define CGC_TSU (1 << 5) -#define CGC_DUNIT (1 << 6) -#define CGC_RUNIT (1 << 7) -#define CGC_XOR0 (1 << 8) -#define CGC_AUDIO (1 << 9) -#define CGC_POWERSAVE (1 << 11) -#define CGC_SATA0 (1 << 14) -#define CGC_SATA1 (1 << 15) -#define CGC_XOR1 (1 << 16) -#define CGC_CRYPTO (1 << 17) -#define CGC_PEX1 (1 << 18) -#define CGC_GE1 (1 << 19) -#define CGC_TDM (1 << 20) -#define CGC_RESERVED (0x6 << 21) - -#define MEMORY_PM_CTRL (BRIDGE_VIRT_BASE + 0x118) -#define MEMORY_PM_CTRL_PHYS (BRIDGE_PHYS_BASE + 0x118) - -#endif diff --git a/arch/arm/mach-kirkwood/include/mach/entry-macro.S b/arch/arm/mach-kirkwood/include/mach/entry-macro.S deleted file mode 100644 index 82db29f7af8f..000000000000 --- a/arch/arm/mach-kirkwood/include/mach/entry-macro.S +++ /dev/null @@ -1,34 +0,0 @@ -/* - * arch/arm/mach-kirkwood/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for Marvell Kirkwood platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include - - .macro get_irqnr_preamble, base, tmp - ldr \base, =IRQ_VIRT_BASE - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - @ check low interrupts - ldr \irqstat, [\base, #IRQ_CAUSE_LOW_OFF] - ldr \tmp, [\base, #IRQ_MASK_LOW_OFF] - mov \irqnr, #31 - ands \irqstat, \irqstat, \tmp - bne 1001f - - @ if no low interrupts set, check high interrupts - ldr \irqstat, [\base, #IRQ_CAUSE_HIGH_OFF] - ldr \tmp, [\base, #IRQ_MASK_HIGH_OFF] - mov \irqnr, #63 - ands \irqstat, \irqstat, \tmp - - @ find first active interrupt source -1001: clzne \irqstat, \irqstat - subne \irqnr, \irqnr, \irqstat - .endm diff --git a/arch/arm/mach-kirkwood/include/mach/hardware.h b/arch/arm/mach-kirkwood/include/mach/hardware.h deleted file mode 100644 index 742b74f43e41..000000000000 --- a/arch/arm/mach-kirkwood/include/mach/hardware.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * arch/arm/mach-kirkwood/include/mach/hardware.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include "kirkwood.h" - -#endif diff --git a/arch/arm/mach-kirkwood/include/mach/irqs.h b/arch/arm/mach-kirkwood/include/mach/irqs.h deleted file mode 100644 index 2bf8161e3b51..000000000000 --- a/arch/arm/mach-kirkwood/include/mach/irqs.h +++ /dev/null @@ -1,65 +0,0 @@ -/* - * arch/arm/mach-kirkwood/include/mach/irqs.h - * - * IRQ definitions for Marvell Kirkwood SoCs - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -/* - * Low Interrupt Controller - */ -#define IRQ_KIRKWOOD_HIGH_SUM 0 -#define IRQ_KIRKWOOD_BRIDGE 1 -#define IRQ_KIRKWOOD_HOST2CPU 2 -#define IRQ_KIRKWOOD_CPU2HOST 3 -#define IRQ_KIRKWOOD_XOR_00 5 -#define IRQ_KIRKWOOD_XOR_01 6 -#define IRQ_KIRKWOOD_XOR_10 7 -#define IRQ_KIRKWOOD_XOR_11 8 -#define IRQ_KIRKWOOD_PCIE 9 -#define IRQ_KIRKWOOD_PCIE1 10 -#define IRQ_KIRKWOOD_GE00_SUM 11 -#define IRQ_KIRKWOOD_GE01_SUM 15 -#define IRQ_KIRKWOOD_USB 19 -#define IRQ_KIRKWOOD_SATA 21 -#define IRQ_KIRKWOOD_CRYPTO 22 -#define IRQ_KIRKWOOD_SPI 23 -#define IRQ_KIRKWOOD_I2S 24 -#define IRQ_KIRKWOOD_TS_0 26 -#define IRQ_KIRKWOOD_SDIO 28 -#define IRQ_KIRKWOOD_TWSI 29 -#define IRQ_KIRKWOOD_AVB 30 -#define IRQ_KIRKWOOD_TDMI 31 - -/* - * High Interrupt Controller - */ -#define IRQ_KIRKWOOD_UART_0 33 -#define IRQ_KIRKWOOD_UART_1 34 -#define IRQ_KIRKWOOD_GPIO_LOW_0_7 35 -#define IRQ_KIRKWOOD_GPIO_LOW_8_15 36 -#define IRQ_KIRKWOOD_GPIO_LOW_16_23 37 -#define IRQ_KIRKWOOD_GPIO_LOW_24_31 38 -#define IRQ_KIRKWOOD_GPIO_HIGH_0_7 39 -#define IRQ_KIRKWOOD_GPIO_HIGH_8_15 40 -#define IRQ_KIRKWOOD_GPIO_HIGH_16_23 41 -#define IRQ_KIRKWOOD_GE00_ERR 46 -#define IRQ_KIRKWOOD_GE01_ERR 47 -#define IRQ_KIRKWOOD_RTC 53 - -/* - * KIRKWOOD General Purpose Pins - */ -#define IRQ_KIRKWOOD_GPIO_START 64 -#define NR_GPIO_IRQS 50 - -#define NR_IRQS (IRQ_KIRKWOOD_GPIO_START + NR_GPIO_IRQS) - - -#endif diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h deleted file mode 100644 index 92976cef3910..000000000000 --- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h +++ /dev/null @@ -1,142 +0,0 @@ -/* - * arch/arm/mach-kirkwood/include/mach/kirkwood.h - * - * Generic definitions for Marvell Kirkwood SoC flavors: - * 88F6180, 88F6192 and 88F6281. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_KIRKWOOD_H -#define __ASM_ARCH_KIRKWOOD_H - -/* - * Marvell Kirkwood address maps. - * - * phys - * e0000000 PCIe #0 Memory space - * e8000000 PCIe #1 Memory space - * f1000000 on-chip peripheral registers - * f2000000 PCIe #0 I/O space - * f3000000 PCIe #1 I/O space - * f4000000 NAND controller address window - * f5000000 Security Accelerator SRAM - * - * virt phys size - * fed00000 f1000000 1M on-chip peripheral registers - * fee00000 f2000000 1M PCIe #0 I/O space - * fef00000 f3000000 1M PCIe #1 I/O space - */ - -#define KIRKWOOD_SRAM_PHYS_BASE 0xf5000000 -#define KIRKWOOD_SRAM_SIZE SZ_2K - -#define KIRKWOOD_NAND_MEM_PHYS_BASE 0xf4000000 -#define KIRKWOOD_NAND_MEM_SIZE SZ_1K - -#define KIRKWOOD_PCIE1_IO_PHYS_BASE 0xf3000000 -#define KIRKWOOD_PCIE1_IO_BUS_BASE 0x00010000 -#define KIRKWOOD_PCIE1_IO_SIZE SZ_64K - -#define KIRKWOOD_PCIE_IO_PHYS_BASE 0xf2000000 -#define KIRKWOOD_PCIE_IO_BUS_BASE 0x00000000 -#define KIRKWOOD_PCIE_IO_SIZE SZ_64K - -#define KIRKWOOD_REGS_PHYS_BASE 0xf1000000 -#define KIRKWOOD_REGS_VIRT_BASE IOMEM(0xfed00000) -#define KIRKWOOD_REGS_SIZE SZ_1M - -#define KIRKWOOD_PCIE_MEM_PHYS_BASE 0xe0000000 -#define KIRKWOOD_PCIE_MEM_BUS_BASE 0xe0000000 -#define KIRKWOOD_PCIE_MEM_SIZE SZ_128M - -#define KIRKWOOD_PCIE1_MEM_PHYS_BASE 0xe8000000 -#define KIRKWOOD_PCIE1_MEM_BUS_BASE 0xe8000000 -#define KIRKWOOD_PCIE1_MEM_SIZE SZ_128M - -/* - * Register Map - */ -#define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x00000) -#define DDR_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x00000) -#define DDR_WINDOW_CPU_BASE (DDR_PHYS_BASE + 0x1500) -#define DDR_WINDOW_CPU_SZ (0x20) -#define DDR_OPERATION_BASE (DDR_PHYS_BASE + 0x1418) - -#define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x10000) -#define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x10000) -#define SAMPLE_AT_RESET (DEV_BUS_VIRT_BASE + 0x0030) -#define DEVICE_ID (DEV_BUS_VIRT_BASE + 0x0034) -#define GPIO_LOW_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x0100) -#define GPIO_HIGH_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x0140) -#define RTC_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x0300) -#define SPI_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x0600) -#define I2C_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x1000) -#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2000) -#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2000) -#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2100) -#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2100) - -#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x20000) -#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x20000) -#define BRIDGE_WINS_BASE (BRIDGE_PHYS_BASE) -#define BRIDGE_WINS_SZ (0x80) - -#define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x30000) - -#define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x40000) -#define PCIE_LINK_CTRL (PCIE_VIRT_BASE + 0x70) -#define PCIE_STATUS (PCIE_VIRT_BASE + 0x1a04) -#define PCIE1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x44000) -#define PCIE1_LINK_CTRL (PCIE1_VIRT_BASE + 0x70) -#define PCIE1_STATUS (PCIE1_VIRT_BASE + 0x1a04) - -#define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x50000) - -#define XOR0_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60800) -#define XOR0_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60800) -#define XOR1_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60900) -#define XOR1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60900) -#define XOR0_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60A00) -#define XOR0_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60A00) -#define XOR1_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60B00) -#define XOR1_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60B00) - -#define GE00_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x70000) -#define GE01_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x74000) - -#define SATA_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x80000) -#define SATA_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x80000) -#define SATA0_IF_CTRL (SATA_VIRT_BASE + 0x2050) -#define SATA0_PHY_MODE_2 (SATA_VIRT_BASE + 0x2330) -#define SATA1_IF_CTRL (SATA_VIRT_BASE + 0x4050) -#define SATA1_PHY_MODE_2 (SATA_VIRT_BASE + 0x4330) - -#define SDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x90000) - -#define AUDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0xA0000) -#define AUDIO_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0xA0000) - -/* - * Supported devices and revisions. - */ -#define MV88F6281_DEV_ID 0x6281 -#define MV88F6281_REV_Z0 0 -#define MV88F6281_REV_A0 2 -#define MV88F6281_REV_A1 3 - -#define MV88F6192_DEV_ID 0x6192 -#define MV88F6192_REV_Z0 0 -#define MV88F6192_REV_A0 2 -#define MV88F6192_REV_A1 3 - -#define MV88F6180_DEV_ID 0x6180 -#define MV88F6180_REV_A0 2 -#define MV88F6180_REV_A1 3 - -#define MV88F6282_DEV_ID 0x6282 -#define MV88F6282_REV_A0 0 -#define MV88F6282_REV_A1 1 -#endif diff --git a/arch/arm/mach-kirkwood/include/mach/uncompress.h b/arch/arm/mach-kirkwood/include/mach/uncompress.h deleted file mode 100644 index 5bca5534021f..000000000000 --- a/arch/arm/mach-kirkwood/include/mach/uncompress.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * arch/arm/mach-kirkwood/include/mach/uncompress.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include - -#define SERIAL_BASE ((unsigned char *)UART0_PHYS_BASE) - -static void putc(const char c) -{ - unsigned char *base = SERIAL_BASE; - int i; - - for (i = 0; i < 0x1000; i++) { - if (base[UART_LSR << 2] & UART_LSR_THRE) - break; - barrier(); - } - - base[UART_TX << 2] = c; -} - -static void flush(void) -{ - unsigned char *base = SERIAL_BASE; - unsigned char mask; - int i; - - mask = UART_LSR_TEMT | UART_LSR_THRE; - - for (i = 0; i < 0x1000; i++) { - if ((base[UART_LSR << 2] & mask) == mask) - break; - barrier(); - } -} - -/* - * nothing to do - */ -#define arch_decomp_setup() diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c deleted file mode 100644 index 2c47a8ad0e27..000000000000 --- a/arch/arm/mach-kirkwood/irq.c +++ /dev/null @@ -1,82 +0,0 @@ -/* - * arch/arm/mach-kirkwood/irq.c - * - * Kirkwood IRQ handling. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include "common.h" - -static int __initdata gpio0_irqs[4] = { - IRQ_KIRKWOOD_GPIO_LOW_0_7, - IRQ_KIRKWOOD_GPIO_LOW_8_15, - IRQ_KIRKWOOD_GPIO_LOW_16_23, - IRQ_KIRKWOOD_GPIO_LOW_24_31, -}; - -static int __initdata gpio1_irqs[4] = { - IRQ_KIRKWOOD_GPIO_HIGH_0_7, - IRQ_KIRKWOOD_GPIO_HIGH_8_15, - IRQ_KIRKWOOD_GPIO_HIGH_16_23, - 0, -}; - -#ifdef CONFIG_MULTI_IRQ_HANDLER -/* - * Compiling with both non-DT and DT support enabled, will - * break asm irq handler used by non-DT boards. Therefore, - * we provide a C-style irq handler even for non-DT boards, - * if MULTI_IRQ_HANDLER is set. - */ - -static void __iomem *kirkwood_irq_base = IRQ_VIRT_BASE; - -asmlinkage void -__exception_irq_entry kirkwood_legacy_handle_irq(struct pt_regs *regs) -{ - u32 stat; - - stat = readl_relaxed(kirkwood_irq_base + IRQ_CAUSE_LOW_OFF); - stat &= readl_relaxed(kirkwood_irq_base + IRQ_MASK_LOW_OFF); - if (stat) { - unsigned int hwirq = __fls(stat); - handle_IRQ(hwirq, regs); - return; - } - stat = readl_relaxed(kirkwood_irq_base + IRQ_CAUSE_HIGH_OFF); - stat &= readl_relaxed(kirkwood_irq_base + IRQ_MASK_HIGH_OFF); - if (stat) { - unsigned int hwirq = 32 + __fls(stat); - handle_IRQ(hwirq, regs); - return; - } -} -#endif - -void __init kirkwood_init_irq(void) -{ - orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF); - orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF); - -#ifdef CONFIG_MULTI_IRQ_HANDLER - set_handle_irq(kirkwood_legacy_handle_irq); -#endif - - /* - * Initialize gpiolib for GPIOs 0-49. - */ - orion_gpio_init(NULL, 0, 32, GPIO_LOW_VIRT_BASE, 0, - IRQ_KIRKWOOD_GPIO_START, gpio0_irqs); - orion_gpio_init(NULL, 32, 18, GPIO_HIGH_VIRT_BASE, 0, - IRQ_KIRKWOOD_GPIO_START + 32, gpio1_irqs); -} diff --git a/arch/arm/mach-kirkwood/lacie_v2-common.c b/arch/arm/mach-kirkwood/lacie_v2-common.c deleted file mode 100644 index 8e3e4331c380..000000000000 --- a/arch/arm/mach-kirkwood/lacie_v2-common.c +++ /dev/null @@ -1,114 +0,0 @@ -/* - * arch/arm/mach-kirkwood/lacie_v2-common.c - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "common.h" -#include "lacie_v2-common.h" - -/***************************************************************************** - * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005) - ****************************************************************************/ - -static struct mtd_partition lacie_v2_flash_parts[] = { - { - .name = "u-boot", - .size = MTDPART_SIZ_FULL, - .offset = 0, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, -}; - -static const struct flash_platform_data lacie_v2_flash = { - .type = "mx25l4005a", - .name = "spi_flash", - .parts = lacie_v2_flash_parts, - .nr_parts = ARRAY_SIZE(lacie_v2_flash_parts), -}; - -static struct spi_board_info __initdata lacie_v2_spi_slave_info[] = { - { - .modalias = "m25p80", - .platform_data = &lacie_v2_flash, - .irq = -1, - .max_speed_hz = 20000000, - .bus_num = 0, - .chip_select = 0, - }, -}; - -void __init lacie_v2_register_flash(void) -{ - spi_register_board_info(lacie_v2_spi_slave_info, - ARRAY_SIZE(lacie_v2_spi_slave_info)); - kirkwood_spi_init(); -} - -/***************************************************************************** - * I2C devices - ****************************************************************************/ - -static struct at24_platform_data at24c04 = { - .byte_len = SZ_4K / 8, - .page_size = 16, -}; - -/* - * i2c addr | chip | description - * 0x50 | HT24LC04 | eeprom (512B) - */ - -static struct i2c_board_info __initdata lacie_v2_i2c_info[] = { - { - I2C_BOARD_INFO("24c04", 0x50), - .platform_data = &at24c04, - } -}; - -void __init lacie_v2_register_i2c_devices(void) -{ - kirkwood_i2c_init(); - i2c_register_board_info(0, lacie_v2_i2c_info, - ARRAY_SIZE(lacie_v2_i2c_info)); -} - -/***************************************************************************** - * Hard Disk power - ****************************************************************************/ - -static int __initdata lacie_v2_gpio_hdd_power[] = { 16, 17, 41, 42, 43 }; - -void __init lacie_v2_hdd_power_init(int hdd_num) -{ - int i; - int err; - - /* Power up all hard disks. */ - for (i = 0; i < hdd_num; i++) { - err = gpio_request(lacie_v2_gpio_hdd_power[i], NULL); - if (err == 0) { - err = gpio_direction_output( - lacie_v2_gpio_hdd_power[i], 1); - /* Free the HDD power GPIOs. This allow user-space to - * configure them via the gpiolib sysfs interface. */ - gpio_free(lacie_v2_gpio_hdd_power[i]); - } - if (err) - pr_err("Failed to power up HDD%d\n", i + 1); - } -} diff --git a/arch/arm/mach-kirkwood/lacie_v2-common.h b/arch/arm/mach-kirkwood/lacie_v2-common.h deleted file mode 100644 index fc64f578536e..000000000000 --- a/arch/arm/mach-kirkwood/lacie_v2-common.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * arch/arm/mach-kirkwood/lacie_v2-common.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ARCH_KIRKWOOD_LACIE_V2_COMMON_H -#define __ARCH_KIRKWOOD_LACIE_V2_COMMON_H - -void lacie_v2_register_flash(void); -void lacie_v2_register_i2c_devices(void); -void lacie_v2_hdd_power_init(int hdd_num); - -#endif diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c deleted file mode 100644 index e96fd71abd76..000000000000 --- a/arch/arm/mach-kirkwood/mpp.c +++ /dev/null @@ -1,43 +0,0 @@ -/* - * arch/arm/mach-kirkwood/mpp.c - * - * MPP functions for Marvell Kirkwood SoCs - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include -#include -#include -#include -#include -#include -#include "common.h" -#include "mpp.h" - -static unsigned int __init kirkwood_variant(void) -{ - u32 dev, rev; - - kirkwood_pcie_id(&dev, &rev); - - if (dev == MV88F6281_DEV_ID && rev >= MV88F6281_REV_A0) - return MPP_F6281_MASK; - if (dev == MV88F6282_DEV_ID) - return MPP_F6282_MASK; - if (dev == MV88F6192_DEV_ID && rev >= MV88F6192_REV_A0) - return MPP_F6192_MASK; - if (dev == MV88F6180_DEV_ID) - return MPP_F6180_MASK; - - pr_err("MPP setup: unknown kirkwood variant (dev %#x rev %#x)\n", - dev, rev); - return 0; -} - -void __init kirkwood_mpp_conf(unsigned int *mpp_list) -{ - orion_mpp_conf(mpp_list, kirkwood_variant(), - MPP_MAX, DEV_BUS_VIRT_BASE); -} diff --git a/arch/arm/mach-kirkwood/mpp.h b/arch/arm/mach-kirkwood/mpp.h deleted file mode 100644 index d5a0d1da2e0e..000000000000 --- a/arch/arm/mach-kirkwood/mpp.h +++ /dev/null @@ -1,348 +0,0 @@ -/* - * linux/arch/arm/mach-kirkwood/mpp.h -- Multi Purpose Pins - * - * Copyright 2009: Marvell Technology Group Ltd. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __KIRKWOOD_MPP_H -#define __KIRKWOOD_MPP_H - -#define MPP(_num, _sel, _in, _out, _F6180, _F6190, _F6192, _F6281, _F6282) ( \ - /* MPP number */ ((_num) & 0xff) | \ - /* MPP select value */ (((_sel) & 0xf) << 8) | \ - /* may be input signal */ ((!!(_in)) << 12) | \ - /* may be output signal */ ((!!(_out)) << 13) | \ - /* available on F6180 */ ((!!(_F6180)) << 14) | \ - /* available on F6190 */ ((!!(_F6190)) << 15) | \ - /* available on F6192 */ ((!!(_F6192)) << 16) | \ - /* available on F6281 */ ((!!(_F6281)) << 17) | \ - /* available on F6282 */ ((!!(_F6282)) << 18)) - - /* num sel i o 6180 6190 6192 6281 6282 */ - -#define MPP_F6180_MASK MPP( 0, 0x0, 0, 0, 1, 0, 0, 0, 0 ) -#define MPP_F6190_MASK MPP( 0, 0x0, 0, 0, 0, 1, 0, 0, 0 ) -#define MPP_F6192_MASK MPP( 0, 0x0, 0, 0, 0, 0, 1, 0, 0 ) -#define MPP_F6281_MASK MPP( 0, 0x0, 0, 0, 0, 0, 0, 1, 0 ) -#define MPP_F6282_MASK MPP( 0, 0x0, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP0_GPIO MPP( 0, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP0_NF_IO2 MPP( 0, 0x1, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP0_SPI_SCn MPP( 0, 0x2, 0, 0, 1, 1, 1, 1, 1 ) - -#define MPP1_GPO MPP( 1, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP1_NF_IO3 MPP( 1, 0x1, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP1_SPI_MOSI MPP( 1, 0x2, 0, 0, 1, 1, 1, 1, 1 ) - -#define MPP2_GPO MPP( 2, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP2_NF_IO4 MPP( 2, 0x1, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP2_SPI_SCK MPP( 2, 0x2, 0, 0, 1, 1, 1, 1, 1 ) - -#define MPP3_GPO MPP( 3, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP3_NF_IO5 MPP( 3, 0x1, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP3_SPI_MISO MPP( 3, 0x2, 0, 0, 1, 1, 1, 1, 1 ) - -#define MPP4_GPIO MPP( 4, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP4_NF_IO6 MPP( 4, 0x1, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP4_UART0_RXD MPP( 4, 0x2, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP4_SATA1_ACTn MPP( 4, 0x5, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP4_LCD_VGA_HSYNC MPP( 4, 0xb, 0, 0, 0, 0, 0, 0, 1 ) -#define MPP4_PTP_CLK MPP( 4, 0xd, 0, 0, 1, 1, 1, 1, 0 ) - -#define MPP5_GPO MPP( 5, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP5_NF_IO7 MPP( 5, 0x1, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP5_UART0_TXD MPP( 5, 0x2, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP5_PTP_TRIG_GEN MPP( 5, 0x4, 0, 0, 1, 1, 1, 1, 0 ) -#define MPP5_SATA0_ACTn MPP( 5, 0x5, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP5_LCD_VGA_VSYNC MPP( 5, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP6_SYSRST_OUTn MPP( 6, 0x1, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP6_SPI_MOSI MPP( 6, 0x2, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP6_PTP_TRIG_GEN MPP( 6, 0x3, 0, 0, 1, 1, 1, 1, 0 ) - -#define MPP7_GPO MPP( 7, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP7_PEX_RST_OUTn MPP( 7, 0x1, 0, 0, 1, 1, 1, 1, 0 ) -#define MPP7_SPI_SCn MPP( 7, 0x2, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP7_PTP_TRIG_GEN MPP( 7, 0x3, 0, 0, 1, 1, 1, 1, 0 ) -#define MPP7_LCD_PWM MPP( 7, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP8_GPIO MPP( 8, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP8_TW0_SDA MPP( 8, 0x1, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP8_UART0_RTS MPP( 8, 0x2, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP8_UART1_RTS MPP( 8, 0x3, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP8_MII0_RXERR MPP( 8, 0x4, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP8_SATA1_PRESENTn MPP( 8, 0x5, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP8_PTP_CLK MPP( 8, 0xc, 0, 0, 1, 1, 1, 1, 0 ) -#define MPP8_MII0_COL MPP( 8, 0xd, 0, 0, 1, 1, 1, 1, 1 ) - -#define MPP9_GPIO MPP( 9, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP9_TW0_SCK MPP( 9, 0x1, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP9_UART0_CTS MPP( 9, 0x2, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP9_UART1_CTS MPP( 9, 0x3, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP9_SATA0_PRESENTn MPP( 9, 0x5, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP9_PTP_EVENT_REQ MPP( 9, 0xc, 0, 0, 1, 1, 1, 1, 0 ) -#define MPP9_MII0_CRS MPP( 9, 0xd, 0, 0, 1, 1, 1, 1, 1 ) - -#define MPP10_GPO MPP( 10, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP10_SPI_SCK MPP( 10, 0x2, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP10_UART0_TXD MPP( 10, 0X3, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP10_SATA1_ACTn MPP( 10, 0x5, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP10_PTP_TRIG_GEN MPP( 10, 0xc, 0, 0, 1, 1, 1, 1, 0 ) - -#define MPP11_GPIO MPP( 11, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP11_SPI_MISO MPP( 11, 0x2, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP11_UART0_RXD MPP( 11, 0x3, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP11_PTP_EVENT_REQ MPP( 11, 0x4, 0, 0, 1, 1, 1, 1, 0 ) -#define MPP11_PTP_TRIG_GEN MPP( 11, 0xc, 0, 0, 1, 1, 1, 1, 0 ) -#define MPP11_PTP_CLK MPP( 11, 0xd, 0, 0, 1, 1, 1, 1, 0 ) -#define MPP11_SATA0_ACTn MPP( 11, 0x5, 0, 0, 0, 1, 1, 1, 1 ) - -#define MPP12_GPO MPP( 12, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP12_GPIO MPP( 12, 0x0, 1, 1, 0, 0, 0, 1, 0 ) -#define MPP12_SD_CLK MPP( 12, 0x1, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP12_AU_SPDIF0 MPP( 12, 0xa, 0, 0, 0, 0, 0, 0, 1 ) -#define MPP12_SPI_MOSI MPP( 12, 0xb, 0, 0, 0, 0, 0, 0, 1 ) -#define MPP12_TW1_SDA MPP( 12, 0xd, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP13_GPIO MPP( 13, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP13_SD_CMD MPP( 13, 0x1, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP13_UART1_TXD MPP( 13, 0x3, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP13_AU_SPDIFRMCLK MPP( 13, 0xa, 0, 0, 0, 0, 0, 0, 1 ) -#define MPP13_LCDPWM MPP( 13, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP14_GPIO MPP( 14, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP14_SD_D0 MPP( 14, 0x1, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP14_UART1_RXD MPP( 14, 0x3, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP14_SATA1_PRESENTn MPP( 14, 0x4, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP14_AU_SPDIFI MPP( 14, 0xa, 0, 0, 0, 0, 0, 0, 1 ) -#define MPP14_AU_I2SDI MPP( 14, 0xb, 0, 0, 0, 0, 0, 0, 1 ) -#define MPP14_MII0_COL MPP( 14, 0xd, 0, 0, 1, 1, 1, 1, 1 ) - -#define MPP15_GPIO MPP( 15, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP15_SD_D1 MPP( 15, 0x1, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP15_UART0_RTS MPP( 15, 0x2, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP15_UART1_TXD MPP( 15, 0x3, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP15_SATA0_ACTn MPP( 15, 0x4, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP15_SPI_CSn MPP( 15, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP16_GPIO MPP( 16, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP16_SD_D2 MPP( 16, 0x1, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP16_UART0_CTS MPP( 16, 0x2, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP16_UART1_RXD MPP( 16, 0x3, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP16_SATA1_ACTn MPP( 16, 0x4, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP16_LCD_EXT_REF_CLK MPP( 16, 0xb, 0, 0, 0, 0, 0, 0, 1 ) -#define MPP16_MII0_CRS MPP( 16, 0xd, 0, 0, 1, 1, 1, 1, 1 ) - -#define MPP17_GPIO MPP( 17, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP17_SD_D3 MPP( 17, 0x1, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP17_SATA0_PRESENTn MPP( 17, 0x4, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP17_SATA1_ACTn MPP( 17, 0xa, 0, 0, 0, 0, 0, 0, 1 ) -#define MPP17_TW1_SCK MPP( 17, 0xd, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP18_GPO MPP( 18, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP18_NF_IO0 MPP( 18, 0x1, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP18_PEX0_CLKREQ MPP( 18, 0x2, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP19_GPO MPP( 19, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP19_NF_IO1 MPP( 19, 0x1, 0, 0, 1, 1, 1, 1, 1 ) - -#define MPP20_GPIO MPP( 20, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP20_TSMP0 MPP( 20, 0x1, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP20_TDM_CH0_TX_QL MPP( 20, 0x2, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP20_GE1_TXD0 MPP( 20, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP20_AU_SPDIFI MPP( 20, 0x4, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP20_SATA1_ACTn MPP( 20, 0x5, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP20_LCD_D0 MPP( 20, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP21_GPIO MPP( 21, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP21_TSMP1 MPP( 21, 0x1, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP21_TDM_CH0_RX_QL MPP( 21, 0x2, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP21_GE1_TXD1 MPP( 21, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP21_AU_SPDIFO MPP( 21, 0x4, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP21_SATA0_ACTn MPP( 21, 0x5, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP21_LCD_D1 MPP( 21, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP22_GPIO MPP( 22, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP22_TSMP2 MPP( 22, 0x1, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP22_TDM_CH2_TX_QL MPP( 22, 0x2, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP22_GE1_TXD2 MPP( 22, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP22_AU_SPDIFRMKCLK MPP( 22, 0x4, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP22_SATA1_PRESENTn MPP( 22, 0x5, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP22_LCD_D2 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP23_GPIO MPP( 23, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP23_TSMP3 MPP( 23, 0x1, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP23_TDM_CH2_RX_QL MPP( 23, 0x2, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP23_GE1_TXD3 MPP( 23, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP23_AU_I2SBCLK MPP( 23, 0x4, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP23_SATA0_PRESENTn MPP( 23, 0x5, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP23_LCD_D3 MPP( 23, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP24_GPIO MPP( 24, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP24_TSMP4 MPP( 24, 0x1, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP24_TDM_SPI_CS0 MPP( 24, 0x2, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP24_GE1_RXD0 MPP( 24, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP24_AU_I2SDO MPP( 24, 0x4, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP24_LCD_D4 MPP( 24, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP25_GPIO MPP( 25, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP25_TSMP5 MPP( 25, 0x1, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP25_TDM_SPI_SCK MPP( 25, 0x2, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP25_GE1_RXD1 MPP( 25, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP25_AU_I2SLRCLK MPP( 25, 0x4, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP25_LCD_D5 MPP( 25, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP26_GPIO MPP( 26, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP26_TSMP6 MPP( 26, 0x1, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP26_TDM_SPI_MISO MPP( 26, 0x2, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP26_GE1_RXD2 MPP( 26, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP26_AU_I2SMCLK MPP( 26, 0x4, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP26_LCD_D6 MPP( 26, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP27_GPIO MPP( 27, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP27_TSMP7 MPP( 27, 0x1, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP27_TDM_SPI_MOSI MPP( 27, 0x2, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP27_GE1_RXD3 MPP( 27, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP27_AU_I2SDI MPP( 27, 0x4, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP27_LCD_D7 MPP( 27, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP28_GPIO MPP( 28, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP28_TSMP8 MPP( 28, 0x1, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP28_TDM_CODEC_INTn MPP( 28, 0x2, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP28_GE1_COL MPP( 28, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP28_AU_EXTCLK MPP( 28, 0x4, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP28_LCD_D8 MPP( 28, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP29_GPIO MPP( 29, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP29_TSMP9 MPP( 29, 0x1, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP29_TDM_CODEC_RSTn MPP( 29, 0x2, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP29_GE1_TCLK MPP( 29, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP29_LCD_D9 MPP( 29, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP30_GPIO MPP( 30, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP30_TSMP10 MPP( 30, 0x1, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP30_TDM_PCLK MPP( 30, 0x2, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP30_GE1_RXCTL MPP( 30, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP30_LCD_D10 MPP( 30, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP31_GPIO MPP( 31, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP31_TSMP11 MPP( 31, 0x1, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP31_TDM_FS MPP( 31, 0x2, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP31_GE1_RXCLK MPP( 31, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP31_LCD_D11 MPP( 31, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP32_GPIO MPP( 32, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP32_TSMP12 MPP( 32, 0x1, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP32_TDM_DRX MPP( 32, 0x2, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP32_GE1_TCLKOUT MPP( 32, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP32_LCD_D12 MPP( 32, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP33_GPO MPP( 33, 0x0, 0, 1, 0, 1, 1, 1, 1 ) -#define MPP33_TDM_DTX MPP( 33, 0x2, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP33_GE1_TXCTL MPP( 33, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP33_LCD_D13 MPP( 33, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP34_GPIO MPP( 34, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP34_TDM_SPI_CS1 MPP( 34, 0x2, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP34_GE1_TXEN MPP( 34, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP34_SATA1_ACTn MPP( 34, 0x5, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP34_LCD_D14 MPP( 34, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP35_GPIO MPP( 35, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP35_TDM_CH0_TX_QL MPP( 35, 0x2, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP35_GE1_RXERR MPP( 35, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP35_SATA0_ACTn MPP( 35, 0x5, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP35_LCD_D15 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 ) -#define MPP35_MII0_RXERR MPP( 35, 0xc, 0, 0, 1, 1, 1, 1, 1 ) - -#define MPP36_GPIO MPP( 36, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP36_TSMP0 MPP( 36, 0x1, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP36_TDM_SPI_CS1 MPP( 36, 0x2, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP36_AU_SPDIFI MPP( 36, 0x4, 0, 0, 1, 0, 0, 1, 1 ) -#define MPP36_TW1_SDA MPP( 36, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP37_GPIO MPP( 37, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP37_TSMP1 MPP( 37, 0x1, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP37_TDM_CH2_TX_QL MPP( 37, 0x2, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP37_AU_SPDIFO MPP( 37, 0x4, 0, 0, 1, 0, 0, 1, 1 ) -#define MPP37_TW1_SCK MPP( 37, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP38_GPIO MPP( 38, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP38_TSMP2 MPP( 38, 0x1, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP38_TDM_CH2_RX_QL MPP( 38, 0x2, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP38_AU_SPDIFRMLCLK MPP( 38, 0x4, 0, 0, 1, 0, 0, 1, 1 ) -#define MPP38_LCD_D18 MPP( 38, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP39_GPIO MPP( 39, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP39_TSMP3 MPP( 39, 0x1, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP39_TDM_SPI_CS0 MPP( 39, 0x2, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP39_AU_I2SBCLK MPP( 39, 0x4, 0, 0, 1, 0, 0, 1, 1 ) -#define MPP39_LCD_D19 MPP( 39, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP40_GPIO MPP( 40, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP40_TSMP4 MPP( 40, 0x1, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP40_TDM_SPI_SCK MPP( 40, 0x2, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP40_AU_I2SDO MPP( 40, 0x4, 0, 0, 1, 0, 0, 1, 1 ) -#define MPP40_LCD_D20 MPP( 40, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP41_GPIO MPP( 41, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP41_TSMP5 MPP( 41, 0x1, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP41_TDM_SPI_MISO MPP( 41, 0x2, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP41_AU_I2SLRCLK MPP( 41, 0x4, 0, 0, 1, 0, 0, 1, 1 ) -#define MPP41_LCD_D21 MPP( 41, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP42_GPIO MPP( 42, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP42_TSMP6 MPP( 42, 0x1, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP42_TDM_SPI_MOSI MPP( 42, 0x2, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP42_AU_I2SMCLK MPP( 42, 0x4, 0, 0, 1, 0, 0, 1, 1 ) -#define MPP42_LCD_D22 MPP( 42, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP43_GPIO MPP( 43, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP43_TSMP7 MPP( 43, 0x1, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP43_TDM_CODEC_INTn MPP( 43, 0x2, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP43_AU_I2SDI MPP( 43, 0x4, 0, 0, 1, 0, 0, 1, 1 ) -#define MPP43_LCD_D23 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP44_GPIO MPP( 44, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP44_TSMP8 MPP( 44, 0x1, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP44_TDM_CODEC_RSTn MPP( 44, 0x2, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP44_AU_EXTCLK MPP( 44, 0x4, 0, 0, 1, 0, 0, 1, 1 ) -#define MPP44_LCD_CLK MPP( 44, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP45_GPIO MPP( 45, 0x0, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP45_TSMP9 MPP( 45, 0x1, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP45_TDM_PCLK MPP( 45, 0x2, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP245_LCD_E MPP( 45, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP46_GPIO MPP( 46, 0x0, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP46_TSMP10 MPP( 46, 0x1, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP46_TDM_FS MPP( 46, 0x2, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP46_LCD_HSYNC MPP( 46, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP47_GPIO MPP( 47, 0x0, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP47_TSMP11 MPP( 47, 0x1, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP47_TDM_DRX MPP( 47, 0x2, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP47_LCD_VSYNC MPP( 47, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP48_GPIO MPP( 48, 0x0, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP48_TSMP12 MPP( 48, 0x1, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP48_TDM_DTX MPP( 48, 0x2, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP48_LCD_D16 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP49_GPIO MPP( 49, 0x0, 1, 1, 0, 0, 0, 1, 0 ) -#define MPP49_GPO MPP( 49, 0x0, 0, 1, 0, 0, 0, 0, 1 ) -#define MPP49_TSMP9 MPP( 49, 0x1, 0, 0, 0, 0, 0, 1, 0 ) -#define MPP49_TDM_CH0_RX_QL MPP( 49, 0x2, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP49_PTP_CLK MPP( 49, 0x5, 0, 0, 0, 0, 0, 1, 0 ) -#define MPP49_PEX0_CLKREQ MPP( 49, 0xa, 0, 0, 0, 0, 0, 0, 1 ) -#define MPP49_LCD_D17 MPP( 49, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP_MAX 49 - -void kirkwood_mpp_conf(unsigned int *mpp_list); - -#endif diff --git a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c deleted file mode 100644 index 913d032cdb19..000000000000 --- a/arch/arm/mach-kirkwood/netxbig_v2-setup.c +++ /dev/null @@ -1,422 +0,0 @@ -/* - * arch/arm/mach-kirkwood/netxbig_v2-setup.c - * - * LaCie 2Big and 5Big Network v2 board setup - * - * Copyright (C) 2010 Simon Guinot - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "common.h" -#include "mpp.h" -#include "lacie_v2-common.h" - -/***************************************************************************** - * Ethernet - ****************************************************************************/ - -static struct mv643xx_eth_platform_data netxbig_v2_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - -static struct mv643xx_eth_platform_data netxbig_v2_ge01_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(0), -}; - -/***************************************************************************** - * SATA - ****************************************************************************/ - -static struct mv_sata_platform_data netxbig_v2_sata_data = { - .n_ports = 2, -}; - -/***************************************************************************** - * GPIO keys - ****************************************************************************/ - -#define NETXBIG_V2_GPIO_SWITCH_POWER_ON 13 -#define NETXBIG_V2_GPIO_SWITCH_POWER_OFF 15 -#define NETXBIG_V2_GPIO_FUNC_BUTTON 34 - -#define NETXBIG_V2_SWITCH_POWER_ON 0x1 -#define NETXBIG_V2_SWITCH_POWER_OFF 0x2 - -static struct gpio_keys_button netxbig_v2_buttons[] = { - [0] = { - .type = EV_SW, - .code = NETXBIG_V2_SWITCH_POWER_ON, - .gpio = NETXBIG_V2_GPIO_SWITCH_POWER_ON, - .desc = "Back power switch (on|auto)", - .active_low = 1, - }, - [1] = { - .type = EV_SW, - .code = NETXBIG_V2_SWITCH_POWER_OFF, - .gpio = NETXBIG_V2_GPIO_SWITCH_POWER_OFF, - .desc = "Back power switch (auto|off)", - .active_low = 1, - }, - [2] = { - .code = KEY_OPTION, - .gpio = NETXBIG_V2_GPIO_FUNC_BUTTON, - .desc = "Function button", - .active_low = 1, - }, -}; - -static struct gpio_keys_platform_data netxbig_v2_button_data = { - .buttons = netxbig_v2_buttons, - .nbuttons = ARRAY_SIZE(netxbig_v2_buttons), -}; - -static struct platform_device netxbig_v2_gpio_buttons = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &netxbig_v2_button_data, - }, -}; - -/***************************************************************************** - * GPIO extension LEDs - ****************************************************************************/ - -/* - * The LEDs are controlled by a CPLD and can be configured through a GPIO - * extension bus: - * - * - address register : bit [0-2] -> GPIO [47-49] - * - data register : bit [0-2] -> GPIO [44-46] - * - enable register : GPIO 29 - */ - -static int netxbig_v2_gpio_ext_addr[] = { 47, 48, 49 }; -static int netxbig_v2_gpio_ext_data[] = { 44, 45, 46 }; - -static struct netxbig_gpio_ext netxbig_v2_gpio_ext = { - .addr = netxbig_v2_gpio_ext_addr, - .num_addr = ARRAY_SIZE(netxbig_v2_gpio_ext_addr), - .data = netxbig_v2_gpio_ext_data, - .num_data = ARRAY_SIZE(netxbig_v2_gpio_ext_data), - .enable = 29, -}; - -/* - * Address register selection: - * - * addr | register - * ---------------------------- - * 0 | front LED - * 1 | front LED brightness - * 2 | SATA LED brightness - * 3 | SATA0 LED - * 4 | SATA1 LED - * 5 | SATA2 LED - * 6 | SATA3 LED - * 7 | SATA4 LED - * - * Data register configuration: - * - * data | LED brightness - * ------------------------------------------------- - * 0 | min (off) - * - | - - * 7 | max - * - * data | front LED mode - * ------------------------------------------------- - * 0 | fix off - * 1 | fix blue on - * 2 | fix red on - * 3 | blink blue on=1 sec and blue off=1 sec - * 4 | blink red on=1 sec and red off=1 sec - * 5 | blink blue on=2.5 sec and red on=0.5 sec - * 6 | blink blue on=1 sec and red on=1 sec - * 7 | blink blue on=0.5 sec and blue off=2.5 sec - * - * data | SATA LED mode - * ------------------------------------------------- - * 0 | fix off - * 1 | SATA activity blink - * 2 | fix red on - * 3 | blink blue on=1 sec and blue off=1 sec - * 4 | blink red on=1 sec and red off=1 sec - * 5 | blink blue on=2.5 sec and red on=0.5 sec - * 6 | blink blue on=1 sec and red on=1 sec - * 7 | fix blue on - */ - -static int netxbig_v2_red_mled[NETXBIG_LED_MODE_NUM] = { - [NETXBIG_LED_OFF] = 0, - [NETXBIG_LED_ON] = 2, - [NETXBIG_LED_SATA] = NETXBIG_LED_INVALID_MODE, - [NETXBIG_LED_TIMER1] = 4, - [NETXBIG_LED_TIMER2] = NETXBIG_LED_INVALID_MODE, -}; - -static int netxbig_v2_blue_pwr_mled[NETXBIG_LED_MODE_NUM] = { - [NETXBIG_LED_OFF] = 0, - [NETXBIG_LED_ON] = 1, - [NETXBIG_LED_SATA] = NETXBIG_LED_INVALID_MODE, - [NETXBIG_LED_TIMER1] = 3, - [NETXBIG_LED_TIMER2] = 7, -}; - -static int netxbig_v2_blue_sata_mled[NETXBIG_LED_MODE_NUM] = { - [NETXBIG_LED_OFF] = 0, - [NETXBIG_LED_ON] = 7, - [NETXBIG_LED_SATA] = 1, - [NETXBIG_LED_TIMER1] = 3, - [NETXBIG_LED_TIMER2] = NETXBIG_LED_INVALID_MODE, -}; - -static struct netxbig_led_timer netxbig_v2_led_timer[] = { - [0] = { - .delay_on = 500, - .delay_off = 500, - .mode = NETXBIG_LED_TIMER1, - }, - [1] = { - .delay_on = 500, - .delay_off = 1000, - .mode = NETXBIG_LED_TIMER2, - }, -}; - -#define NETXBIG_LED(_name, maddr, mval, baddr) \ - { .name = _name, \ - .mode_addr = maddr, \ - .mode_val = mval, \ - .bright_addr = baddr } - -static struct netxbig_led net2big_v2_leds_ctrl[] = { - NETXBIG_LED("net2big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled, 1), - NETXBIG_LED("net2big-v2:red:power", 0, netxbig_v2_red_mled, 1), - NETXBIG_LED("net2big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2), - NETXBIG_LED("net2big-v2:red:sata0", 3, netxbig_v2_red_mled, 2), - NETXBIG_LED("net2big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2), - NETXBIG_LED("net2big-v2:red:sata1", 4, netxbig_v2_red_mled, 2), -}; - -static struct netxbig_led_platform_data net2big_v2_leds_data = { - .gpio_ext = &netxbig_v2_gpio_ext, - .timer = netxbig_v2_led_timer, - .num_timer = ARRAY_SIZE(netxbig_v2_led_timer), - .leds = net2big_v2_leds_ctrl, - .num_leds = ARRAY_SIZE(net2big_v2_leds_ctrl), -}; - -static struct netxbig_led net5big_v2_leds_ctrl[] = { - NETXBIG_LED("net5big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled, 1), - NETXBIG_LED("net5big-v2:red:power", 0, netxbig_v2_red_mled, 1), - NETXBIG_LED("net5big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2), - NETXBIG_LED("net5big-v2:red:sata0", 3, netxbig_v2_red_mled, 2), - NETXBIG_LED("net5big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2), - NETXBIG_LED("net5big-v2:red:sata1", 4, netxbig_v2_red_mled, 2), - NETXBIG_LED("net5big-v2:blue:sata2", 5, netxbig_v2_blue_sata_mled, 2), - NETXBIG_LED("net5big-v2:red:sata2", 5, netxbig_v2_red_mled, 2), - NETXBIG_LED("net5big-v2:blue:sata3", 6, netxbig_v2_blue_sata_mled, 2), - NETXBIG_LED("net5big-v2:red:sata3", 6, netxbig_v2_red_mled, 2), - NETXBIG_LED("net5big-v2:blue:sata4", 7, netxbig_v2_blue_sata_mled, 2), - NETXBIG_LED("net5big-v2:red:sata5", 7, netxbig_v2_red_mled, 2), -}; - -static struct netxbig_led_platform_data net5big_v2_leds_data = { - .gpio_ext = &netxbig_v2_gpio_ext, - .timer = netxbig_v2_led_timer, - .num_timer = ARRAY_SIZE(netxbig_v2_led_timer), - .leds = net5big_v2_leds_ctrl, - .num_leds = ARRAY_SIZE(net5big_v2_leds_ctrl), -}; - -static struct platform_device netxbig_v2_leds = { - .name = "leds-netxbig", - .id = -1, - .dev = { - .platform_data = &net2big_v2_leds_data, - }, -}; - -/***************************************************************************** - * General Setup - ****************************************************************************/ - -static unsigned int net2big_v2_mpp_config[] __initdata = { - MPP0_SPI_SCn, - MPP1_SPI_MOSI, - MPP2_SPI_SCK, - MPP3_SPI_MISO, - MPP6_SYSRST_OUTn, - MPP7_GPO, /* Request power-off */ - MPP8_TW0_SDA, - MPP9_TW0_SCK, - MPP10_UART0_TXD, - MPP11_UART0_RXD, - MPP13_GPIO, /* Rear power switch (on|auto) */ - MPP14_GPIO, /* USB fuse alarm */ - MPP15_GPIO, /* Rear power switch (auto|off) */ - MPP16_GPIO, /* SATA HDD1 power */ - MPP17_GPIO, /* SATA HDD2 power */ - MPP20_SATA1_ACTn, - MPP21_SATA0_ACTn, - MPP24_GPIO, /* USB mode select */ - MPP26_GPIO, /* USB device vbus */ - MPP28_GPIO, /* USB enable host vbus */ - MPP29_GPIO, /* GPIO extension ALE */ - MPP34_GPIO, /* Rear Push button */ - MPP35_GPIO, /* Inhibit switch power-off */ - MPP36_GPIO, /* SATA HDD1 presence */ - MPP37_GPIO, /* SATA HDD2 presence */ - MPP40_GPIO, /* eSATA presence */ - MPP44_GPIO, /* GPIO extension (data 0) */ - MPP45_GPIO, /* GPIO extension (data 1) */ - MPP46_GPIO, /* GPIO extension (data 2) */ - MPP47_GPIO, /* GPIO extension (addr 0) */ - MPP48_GPIO, /* GPIO extension (addr 1) */ - MPP49_GPIO, /* GPIO extension (addr 2) */ - 0 -}; - -static unsigned int net5big_v2_mpp_config[] __initdata = { - MPP0_SPI_SCn, - MPP1_SPI_MOSI, - MPP2_SPI_SCK, - MPP3_SPI_MISO, - MPP6_SYSRST_OUTn, - MPP7_GPO, /* Request power-off */ - MPP8_TW0_SDA, - MPP9_TW0_SCK, - MPP10_UART0_TXD, - MPP11_UART0_RXD, - MPP13_GPIO, /* Rear power switch (on|auto) */ - MPP14_GPIO, /* USB fuse alarm */ - MPP15_GPIO, /* Rear power switch (auto|off) */ - MPP16_GPIO, /* SATA HDD1 power */ - MPP17_GPIO, /* SATA HDD2 power */ - MPP20_GE1_TXD0, - MPP21_GE1_TXD1, - MPP22_GE1_TXD2, - MPP23_GE1_TXD3, - MPP24_GE1_RXD0, - MPP25_GE1_RXD1, - MPP26_GE1_RXD2, - MPP27_GE1_RXD3, - MPP28_GPIO, /* USB enable host vbus */ - MPP29_GPIO, /* GPIO extension ALE */ - MPP30_GE1_RXCTL, - MPP31_GE1_RXCLK, - MPP32_GE1_TCLKOUT, - MPP33_GE1_TXCTL, - MPP34_GPIO, /* Rear Push button */ - MPP35_GPIO, /* Inhibit switch power-off */ - MPP36_GPIO, /* SATA HDD1 presence */ - MPP37_GPIO, /* SATA HDD2 presence */ - MPP38_GPIO, /* SATA HDD3 presence */ - MPP39_GPIO, /* SATA HDD4 presence */ - MPP40_GPIO, /* SATA HDD5 presence */ - MPP41_GPIO, /* SATA HDD3 power */ - MPP42_GPIO, /* SATA HDD4 power */ - MPP43_GPIO, /* SATA HDD5 power */ - MPP44_GPIO, /* GPIO extension (data 0) */ - MPP45_GPIO, /* GPIO extension (data 1) */ - MPP46_GPIO, /* GPIO extension (data 2) */ - MPP47_GPIO, /* GPIO extension (addr 0) */ - MPP48_GPIO, /* GPIO extension (addr 1) */ - MPP49_GPIO, /* GPIO extension (addr 2) */ - 0 -}; - -#define NETXBIG_V2_GPIO_POWER_OFF 7 - -static void netxbig_v2_power_off(void) -{ - gpio_set_value(NETXBIG_V2_GPIO_POWER_OFF, 1); -} - -static void __init netxbig_v2_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_init(); - if (machine_is_net2big_v2()) - kirkwood_mpp_conf(net2big_v2_mpp_config); - else - kirkwood_mpp_conf(net5big_v2_mpp_config); - - if (machine_is_net2big_v2()) - lacie_v2_hdd_power_init(2); - else - lacie_v2_hdd_power_init(5); - - kirkwood_ehci_init(); - kirkwood_ge00_init(&netxbig_v2_ge00_data); - if (machine_is_net5big_v2()) - kirkwood_ge01_init(&netxbig_v2_ge01_data); - kirkwood_sata_init(&netxbig_v2_sata_data); - kirkwood_uart0_init(); - lacie_v2_register_flash(); - lacie_v2_register_i2c_devices(); - - if (machine_is_net5big_v2()) - netxbig_v2_leds.dev.platform_data = &net5big_v2_leds_data; - platform_device_register(&netxbig_v2_leds); - platform_device_register(&netxbig_v2_gpio_buttons); - - if (gpio_request(NETXBIG_V2_GPIO_POWER_OFF, "power-off") == 0 && - gpio_direction_output(NETXBIG_V2_GPIO_POWER_OFF, 0) == 0) - pm_power_off = netxbig_v2_power_off; - else - pr_err("netxbig_v2: failed to configure power-off GPIO\n"); -} - -#ifdef CONFIG_MACH_NET2BIG_V2 -MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2") - .atag_offset = 0x100, - .init_machine = netxbig_v2_init, - .map_io = kirkwood_map_io, - .init_early = kirkwood_init_early, - .init_irq = kirkwood_init_irq, - .init_time = kirkwood_timer_init, - .restart = kirkwood_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_NET5BIG_V2 -MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2") - .atag_offset = 0x100, - .init_machine = netxbig_v2_init, - .map_io = kirkwood_map_io, - .init_early = kirkwood_init_early, - .init_irq = kirkwood_init_irq, - .init_time = kirkwood_timer_init, - .restart = kirkwood_restart, -MACHINE_END -#endif diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c deleted file mode 100644 index e5cf84103583..000000000000 --- a/arch/arm/mach-kirkwood/openrd-setup.c +++ /dev/null @@ -1,255 +0,0 @@ -/* - * arch/arm/mach-kirkwood/openrd-setup.c - * - * Marvell OpenRD (Base|Client|Ultimate) Board Setup - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "common.h" -#include "mpp.h" - -static struct mtd_partition openrd_nand_parts[] = { - { - .name = "u-boot", - .offset = 0, - .size = SZ_1M, - .mask_flags = MTD_WRITEABLE - }, { - .name = "uImage", - .offset = MTDPART_OFS_NXTBLK, - .size = SZ_4M - }, { - .name = "root", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL - }, -}; - -static struct mv643xx_eth_platform_data openrd_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - -static struct mv643xx_eth_platform_data openrd_ge01_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(24), -}; - -static struct mv_sata_platform_data openrd_sata_data = { - .n_ports = 2, -}; - -static struct mvsdio_platform_data openrd_mvsdio_data = { - .gpio_card_detect = 29, /* MPP29 used as SD card detect */ - .gpio_write_protect = -1, -}; - -static unsigned int openrd_mpp_config[] __initdata = { - MPP12_SD_CLK, - MPP13_SD_CMD, - MPP14_SD_D0, - MPP15_SD_D1, - MPP16_SD_D2, - MPP17_SD_D3, - MPP28_GPIO, - MPP29_GPIO, - MPP34_GPIO, - 0 -}; - -/* Configure MPP for UART1 */ -static unsigned int openrd_uart1_mpp_config[] __initdata = { - MPP13_UART1_TXD, - MPP14_UART1_RXD, - 0 -}; - -static struct i2c_board_info i2c_board_info[] __initdata = { - { - I2C_BOARD_INFO("cs42l51", 0x4a), - }, -}; - -static struct platform_device openrd_client_audio_device = { - .name = "openrd-client-audio", - .id = -1, -}; - -static int __initdata uart1; - -static int __init sd_uart_selection(char *str) -{ - uart1 = -EINVAL; - - /* Default is SD. Change if required, for UART */ - if (!str) - return 0; - - if (!strncmp(str, "232", 3)) { - uart1 = 232; - } else if (!strncmp(str, "485", 3)) { - /* OpenRD-Base doesn't have RS485. Treat is as an - * unknown argument & just have default setting - - * which is SD */ - if (machine_is_openrd_base()) { - uart1 = -ENODEV; - return 1; - } - - uart1 = 485; - } - return 1; -} -/* Parse boot_command_line string kw_openrd_init_uart1=232/485 */ -__setup("kw_openrd_init_uart1=", sd_uart_selection); - -static int __init uart1_mpp_config(void) -{ - kirkwood_mpp_conf(openrd_uart1_mpp_config); - - if (gpio_request(34, "SD_UART1_SEL")) { - pr_err("GPIO request 34 failed for SD/UART1 selection\n"); - return -EIO; - } - - if (gpio_request(28, "RS232_RS485_SEL")) { - pr_err("GPIO request 28 failed for RS232/RS485 selection\n"); - gpio_free(34); - return -EIO; - } - - /* Select UART1 - * Pin # 34: 0 => UART1, 1 => SD */ - gpio_direction_output(34, 0); - - /* Select RS232 OR RS485 - * Pin # 28: 0 => RS232, 1 => RS485 */ - if (uart1 == 232) - gpio_direction_output(28, 0); - else - gpio_direction_output(28, 1); - - gpio_free(34); - gpio_free(28); - - return 0; -} - -static void __init openrd_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_init(); - kirkwood_mpp_conf(openrd_mpp_config); - - kirkwood_uart0_init(); - kirkwood_nand_init(openrd_nand_parts, ARRAY_SIZE(openrd_nand_parts), - 25); - - kirkwood_ehci_init(); - - if (machine_is_openrd_ultimate()) { - openrd_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0); - openrd_ge01_data.phy_addr = MV643XX_ETH_PHY_ADDR(1); - } - - kirkwood_ge00_init(&openrd_ge00_data); - if (!machine_is_openrd_base()) - kirkwood_ge01_init(&openrd_ge01_data); - - kirkwood_sata_init(&openrd_sata_data); - - kirkwood_i2c_init(); - - if (machine_is_openrd_client() || machine_is_openrd_ultimate()) { - platform_device_register(&openrd_client_audio_device); - i2c_register_board_info(0, i2c_board_info, - ARRAY_SIZE(i2c_board_info)); - kirkwood_audio_init(); - } - - if (uart1 <= 0) { - if (uart1 < 0) - pr_err("Invalid kernel parameter to select UART1. Defaulting to SD. ERROR CODE: %d\n", - uart1); - - /* Select SD - * Pin # 34: 0 => UART1, 1 => SD */ - if (gpio_request(34, "SD_UART1_SEL")) { - pr_err("GPIO request 34 failed for SD/UART1 selection\n"); - } else { - - gpio_direction_output(34, 1); - gpio_free(34); - kirkwood_sdio_init(&openrd_mvsdio_data); - } - } else { - if (!uart1_mpp_config()) - kirkwood_uart1_init(); - } -} - -static int __init openrd_pci_init(void) -{ - if (machine_is_openrd_base() || - machine_is_openrd_client() || - machine_is_openrd_ultimate()) - kirkwood_pcie_init(KW_PCIE0); - - return 0; -} -subsys_initcall(openrd_pci_init); - -#ifdef CONFIG_MACH_OPENRD_BASE -MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board") - /* Maintainer: Dhaval Vasa */ - .atag_offset = 0x100, - .init_machine = openrd_init, - .map_io = kirkwood_map_io, - .init_early = kirkwood_init_early, - .init_irq = kirkwood_init_irq, - .init_time = kirkwood_timer_init, - .restart = kirkwood_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_OPENRD_CLIENT -MACHINE_START(OPENRD_CLIENT, "Marvell OpenRD Client Board") - /* Maintainer: Dhaval Vasa */ - .atag_offset = 0x100, - .init_machine = openrd_init, - .map_io = kirkwood_map_io, - .init_early = kirkwood_init_early, - .init_irq = kirkwood_init_irq, - .init_time = kirkwood_timer_init, - .restart = kirkwood_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_OPENRD_ULTIMATE -MACHINE_START(OPENRD_ULTIMATE, "Marvell OpenRD Ultimate Board") - /* Maintainer: Dhaval Vasa */ - .atag_offset = 0x100, - .init_machine = openrd_init, - .map_io = kirkwood_map_io, - .init_early = kirkwood_init_early, - .init_irq = kirkwood_init_irq, - .init_time = kirkwood_timer_init, - .restart = kirkwood_restart, -MACHINE_END -#endif diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c deleted file mode 100644 index 12d86f39f380..000000000000 --- a/arch/arm/mach-kirkwood/pcie.c +++ /dev/null @@ -1,296 +0,0 @@ -/* - * arch/arm/mach-kirkwood/pcie.c - * - * PCIe functions for Marvell Kirkwood SoCs - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include -#include