From 29310e5e860697955b9c10ddb448d61267fab0dc Mon Sep 17 00:00:00 2001 From: Gavin Shan Date: Thu, 20 Jun 2013 13:21:13 +0800 Subject: [PATCH] powerpc/eeh: PowerNV EEH backends The patch adds EEH backends for PowerNV platform. It's notable that part of those EEH backends call to the I/O chip dependent backends. [Removed pointless change to eeh_pseries.c -- BenH] Signed-off-by: Gavin Shan Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/powernv/Makefile | 2 +- arch/powerpc/platforms/powernv/eeh-powernv.c | 419 +++++++++++++++++++ 2 files changed, 420 insertions(+), 1 deletion(-) create mode 100644 arch/powerpc/platforms/powernv/eeh-powernv.c diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile index 09bd0cbb7c4f..7fe595152478 100644 --- a/arch/powerpc/platforms/powernv/Makefile +++ b/arch/powerpc/platforms/powernv/Makefile @@ -3,4 +3,4 @@ obj-y += opal-rtc.o opal-nvram.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_PCI) += pci.o pci-p5ioc2.o pci-ioda.o -obj-$(CONFIG_EEH) += eeh-ioda.o +obj-$(CONFIG_EEH) += eeh-ioda.o eeh-powernv.o diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c new file mode 100644 index 000000000000..9559115424d6 --- /dev/null +++ b/arch/powerpc/platforms/powernv/eeh-powernv.c @@ -0,0 +1,419 @@ +/* + * The file intends to implement the platform dependent EEH operations on + * powernv platform. Actually, the powernv was created in order to fully + * hypervisor support. + * + * Copyright Benjamin Herrenschmidt & Gavin Shan, IBM Corporation 2013. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "powernv.h" +#include "pci.h" + +/** + * powernv_eeh_init - EEH platform dependent initialization + * + * EEH platform dependent initialization on powernv + */ +static int powernv_eeh_init(void) +{ + /* We require OPALv3 */ + if (!firmware_has_feature(FW_FEATURE_OPALv3)) { + pr_warning("%s: OPALv3 is required !\n", __func__); + return -EINVAL; + } + + /* Set EEH probe mode */ + eeh_probe_mode_set(EEH_PROBE_MODE_DEV); + + return 0; +} + +/** + * powernv_eeh_post_init - EEH platform dependent post initialization + * + * EEH platform dependent post initialization on powernv. When + * the function is called, the EEH PEs and devices should have + * been built. If the I/O cache staff has been built, EEH is + * ready to supply service. + */ +static int powernv_eeh_post_init(void) +{ + struct pci_controller *hose; + struct pnv_phb *phb; + int ret = 0; + + list_for_each_entry(hose, &hose_list, list_node) { + phb = hose->private_data; + + if (phb->eeh_ops && phb->eeh_ops->post_init) { + ret = phb->eeh_ops->post_init(hose); + if (ret) + break; + } + } + + return ret; +} + +/** + * powernv_eeh_dev_probe - Do probe on PCI device + * @dev: PCI device + * @flag: unused + * + * When EEH module is installed during system boot, all PCI devices + * are checked one by one to see if it supports EEH. The function + * is introduced for the purpose. By default, EEH has been enabled + * on all PCI devices. That's to say, we only need do necessary + * initialization on the corresponding eeh device and create PE + * accordingly. + * + * It's notable that's unsafe to retrieve the EEH device through + * the corresponding PCI device. During the PCI device hotplug, which + * was possiblly triggered by EEH core, the binding between EEH device + * and the PCI device isn't built yet. + */ +static int powernv_eeh_dev_probe(struct pci_dev *dev, void *flag) +{ + struct pci_controller *hose = pci_bus_to_host(dev->bus); + struct pnv_phb *phb = hose->private_data; + struct device_node *dn = pci_device_to_OF_node(dev); + struct eeh_dev *edev = of_node_to_eeh_dev(dn); + + /* + * When probing the root bridge, which doesn't have any + * subordinate PCI devices. We don't have OF node for + * the root bridge. So it's not reasonable to continue + * the probing. + */ + if (!dn || !edev) + return 0; + + /* Skip for PCI-ISA bridge */ + if ((dev->class >> 8) == PCI_CLASS_BRIDGE_ISA) + return 0; + + /* Initialize eeh device */ + edev->class_code = dev->class; + edev->mode = 0; + edev->config_addr = ((dev->bus->number << 8) | dev->devfn); + edev->pe_config_addr = phb->bdfn_to_pe(phb, dev->bus, dev->devfn & 0xff); + + /* Create PE */ + eeh_add_to_parent_pe(edev); + + /* + * Enable EEH explicitly so that we will do EEH check + * while accessing I/O stuff + * + * FIXME: Enable that for PHB3 later + */ + if (phb->type == PNV_PHB_IODA1) + eeh_subsystem_enabled = 1; + + /* Save memory bars */ + eeh_save_bars(edev); + + return 0; +} + +/** + * powernv_eeh_set_option - Initialize EEH or MMIO/DMA reenable + * @pe: EEH PE + * @option: operation to be issued + * + * The function is used to control the EEH functionality globally. + * Currently, following options are support according to PAPR: + * Enable EEH, Disable EEH, Enable MMIO and Enable DMA + */ +static int powernv_eeh_set_option(struct eeh_pe *pe, int option) +{ + struct pci_controller *hose = pe->phb; + struct pnv_phb *phb = hose->private_data; + int ret = -EEXIST; + + /* + * What we need do is pass it down for hardware + * implementation to handle it. + */ + if (phb->eeh_ops && phb->eeh_ops->set_option) + ret = phb->eeh_ops->set_option(pe, option); + + return ret; +} + +/** + * powernv_eeh_get_pe_addr - Retrieve PE address + * @pe: EEH PE + * + * Retrieve the PE address according to the given tranditional + * PCI BDF (Bus/Device/Function) address. + */ +static int powernv_eeh_get_pe_addr(struct eeh_pe *pe) +{ + return pe->addr; +} + +/** + * powernv_eeh_get_state - Retrieve PE state + * @pe: EEH PE + * @delay: delay while PE state is temporarily unavailable + * + * Retrieve the state of the specified PE. For IODA-compitable + * platform, it should be retrieved from IODA table. Therefore, + * we prefer passing down to hardware implementation to handle + * it. + */ +static int powernv_eeh_get_state(struct eeh_pe *pe, int *delay) +{ + struct pci_controller *hose = pe->phb; + struct pnv_phb *phb = hose->private_data; + int ret = EEH_STATE_NOT_SUPPORT; + + if (phb->eeh_ops && phb->eeh_ops->get_state) { + ret = phb->eeh_ops->get_state(pe); + + /* + * If the PE state is temporarily unavailable, + * to inform the EEH core delay for default + * period (1 second) + */ + if (delay) { + *delay = 0; + if (ret & EEH_STATE_UNAVAILABLE) + *delay = 1000; + } + } + + return ret; +} + +/** + * powernv_eeh_reset - Reset the specified PE + * @pe: EEH PE + * @option: reset option + * + * Reset the specified PE + */ +static int powernv_eeh_reset(struct eeh_pe *pe, int option) +{ + struct pci_controller *hose = pe->phb; + struct pnv_phb *phb = hose->private_data; + int ret = -EEXIST; + + if (phb->eeh_ops && phb->eeh_ops->reset) + ret = phb->eeh_ops->reset(pe, option); + + return ret; +} + +/** + * powernv_eeh_wait_state - Wait for PE state + * @pe: EEH PE + * @max_wait: maximal period in microsecond + * + * Wait for the state of associated PE. It might take some time + * to retrieve the PE's state. + */ +static int powernv_eeh_wait_state(struct eeh_pe *pe, int max_wait) +{ + int ret; + int mwait; + + while (1) { + ret = powernv_eeh_get_state(pe, &mwait); + + /* + * If the PE's state is temporarily unavailable, + * we have to wait for the specified time. Otherwise, + * the PE's state will be returned immediately. + */ + if (ret != EEH_STATE_UNAVAILABLE) + return ret; + + max_wait -= mwait; + if (max_wait <= 0) { + pr_warning("%s: Timeout getting PE#%x's state (%d)\n", + __func__, pe->addr, max_wait); + return EEH_STATE_NOT_SUPPORT; + } + + msleep(mwait); + } + + return EEH_STATE_NOT_SUPPORT; +} + +/** + * powernv_eeh_get_log - Retrieve error log + * @pe: EEH PE + * @severity: temporary or permanent error log + * @drv_log: driver log to be combined with retrieved error log + * @len: length of driver log + * + * Retrieve the temporary or permanent error from the PE. + */ +static int powernv_eeh_get_log(struct eeh_pe *pe, int severity, + char *drv_log, unsigned long len) +{ + struct pci_controller *hose = pe->phb; + struct pnv_phb *phb = hose->private_data; + int ret = -EEXIST; + + if (phb->eeh_ops && phb->eeh_ops->get_log) + ret = phb->eeh_ops->get_log(pe, severity, drv_log, len); + + return ret; +} + +/** + * powernv_eeh_configure_bridge - Configure PCI bridges in the indicated PE + * @pe: EEH PE + * + * The function will be called to reconfigure the bridges included + * in the specified PE so that the mulfunctional PE would be recovered + * again. + */ +static int powernv_eeh_configure_bridge(struct eeh_pe *pe) +{ + struct pci_controller *hose = pe->phb; + struct pnv_phb *phb = hose->private_data; + int ret = 0; + + if (phb->eeh_ops && phb->eeh_ops->configure_bridge) + ret = phb->eeh_ops->configure_bridge(pe); + + return ret; +} + +/** + * powernv_eeh_read_config - Read PCI config space + * @dn: device node + * @where: PCI address + * @size: size to read + * @val: return value + * + * Read config space from the speicifed device + */ +static int powernv_eeh_read_config(struct device_node *dn, int where, + int size, u32 *val) +{ + struct eeh_dev *edev = of_node_to_eeh_dev(dn); + struct pci_dev *dev = eeh_dev_to_pci_dev(edev); + struct pci_controller *hose = edev->phb; + + return hose->ops->read(dev->bus, dev->devfn, where, size, val); +} + +/** + * powernv_eeh_write_config - Write PCI config space + * @dn: device node + * @where: PCI address + * @size: size to write + * @val: value to be written + * + * Write config space to the specified device + */ +static int powernv_eeh_write_config(struct device_node *dn, int where, + int size, u32 val) +{ + struct eeh_dev *edev = of_node_to_eeh_dev(dn); + struct pci_dev *dev = eeh_dev_to_pci_dev(edev); + struct pci_controller *hose = edev->phb; + + hose = pci_bus_to_host(dev->bus); + + return hose->ops->write(dev->bus, dev->devfn, where, size, val); +} + +/** + * powernv_eeh_next_error - Retrieve next EEH error to handle + * @pe: Affected PE + * + * Using OPAL API, to retrieve next EEH error for EEH core to handle + */ +static int powernv_eeh_next_error(struct eeh_pe **pe) +{ + struct pci_controller *hose; + struct pnv_phb *phb = NULL; + + list_for_each_entry(hose, &hose_list, list_node) { + phb = hose->private_data; + break; + } + + if (phb && phb->eeh_ops->next_error) + return phb->eeh_ops->next_error(pe); + + return -EEXIST; +} + +static struct eeh_ops powernv_eeh_ops = { + .name = "powernv", + .init = powernv_eeh_init, + .post_init = powernv_eeh_post_init, + .of_probe = NULL, + .dev_probe = powernv_eeh_dev_probe, + .set_option = powernv_eeh_set_option, + .get_pe_addr = powernv_eeh_get_pe_addr, + .get_state = powernv_eeh_get_state, + .reset = powernv_eeh_reset, + .wait_state = powernv_eeh_wait_state, + .get_log = powernv_eeh_get_log, + .configure_bridge = powernv_eeh_configure_bridge, + .read_config = powernv_eeh_read_config, + .write_config = powernv_eeh_write_config, + .next_error = powernv_eeh_next_error +}; + +/** + * eeh_powernv_init - Register platform dependent EEH operations + * + * EEH initialization on powernv platform. This function should be + * called before any EEH related functions. + */ +static int __init eeh_powernv_init(void) +{ + int ret = -EINVAL; + + if (!machine_is(powernv)) + return ret; + + ret = eeh_ops_register(&powernv_eeh_ops); + if (!ret) + pr_info("EEH: PowerNV platform initialized\n"); + else + pr_info("EEH: Failed to initialize PowerNV platform (%d)\n", ret); + + return ret; +} + +early_initcall(eeh_powernv_init); -- 2.34.1