From cf89c4262bd5fa70e67953126001c08ecea4f346 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Fri, 2 Aug 2013 16:45:22 -0400 Subject: [PATCH] tile PCI RC: support I/O space access To enable this functionality, configure CONFIG_TILE_PCI_IO. Without this flag, the kernel still assigns I/O address ranges to the devices, but no TRIO resource and mapping support is provided. We assign disjoint I/O address ranges to separate PCIe domains. Signed-off-by: Chris Metcalf --- arch/tile/Kconfig | 10 +++ arch/tile/include/asm/io.h | 126 ++++++++++++++++++++++++++++++++--- arch/tile/include/asm/pci.h | 11 +++- arch/tile/kernel/pci_gx.c | 128 +++++++++++++++++++++++++++++++++--- 4 files changed, 257 insertions(+), 18 deletions(-) diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig index 24565a7ffe6d..bfff76947f83 100644 --- a/arch/tile/Kconfig +++ b/arch/tile/Kconfig @@ -396,6 +396,16 @@ config NO_IOMEM config NO_IOPORT def_bool !PCI +config TILE_PCI_IO + bool "PCI I/O space support" + default n + depends on PCI + depends on TILEGX + ---help--- + Enable PCI I/O space support on TILEGx. Since the PCI I/O space + is used by few modern PCIe endpoint devices, its support is disabled + by default to save the TRIO PIO Region resource for other purposes. + source "drivers/pci/Kconfig" config TILE_USB diff --git a/arch/tile/include/asm/io.h b/arch/tile/include/asm/io.h index 31672918064c..73b319e39a3b 100644 --- a/arch/tile/include/asm/io.h +++ b/arch/tile/include/asm/io.h @@ -19,7 +19,8 @@ #include #include -#define IO_SPACE_LIMIT 0xfffffffful +/* Maximum PCI I/O space address supported. */ +#define IO_SPACE_LIMIT 0xffffffff /* * Convert a physical pointer to a virtual kernel pointer for /dev/mem @@ -281,8 +282,108 @@ static inline void memcpy_toio(volatile void __iomem *dst, const void *src, #endif +#if CHIP_HAS_MMIO() && defined(CONFIG_TILE_PCI_IO) + +static inline u8 inb(unsigned long addr) +{ + return readb((volatile void __iomem *) addr); +} + +static inline u16 inw(unsigned long addr) +{ + return readw((volatile void __iomem *) addr); +} + +static inline u32 inl(unsigned long addr) +{ + return readl((volatile void __iomem *) addr); +} + +static inline void outb(u8 b, unsigned long addr) +{ + writeb(b, (volatile void __iomem *) addr); +} + +static inline void outw(u16 b, unsigned long addr) +{ + writew(b, (volatile void __iomem *) addr); +} + +static inline void outl(u32 b, unsigned long addr) +{ + writel(b, (volatile void __iomem *) addr); +} + +static inline void insb(unsigned long addr, void *buffer, int count) +{ + if (count) { + u8 *buf = buffer; + do { + u8 x = inb(addr); + *buf++ = x; + } while (--count); + } +} + +static inline void insw(unsigned long addr, void *buffer, int count) +{ + if (count) { + u16 *buf = buffer; + do { + u16 x = inw(addr); + *buf++ = x; + } while (--count); + } +} + +static inline void insl(unsigned long addr, void *buffer, int count) +{ + if (count) { + u32 *buf = buffer; + do { + u32 x = inl(addr); + *buf++ = x; + } while (--count); + } +} + +static inline void outsb(unsigned long addr, const void *buffer, int count) +{ + if (count) { + const u8 *buf = buffer; + do { + outb(*buf++, addr); + } while (--count); + } +} + +static inline void outsw(unsigned long addr, const void *buffer, int count) +{ + if (count) { + const u16 *buf = buffer; + do { + outw(*buf++, addr); + } while (--count); + } +} + +static inline void outsl(unsigned long addr, const void *buffer, int count) +{ + if (count) { + const u32 *buf = buffer; + do { + outl(*buf++, addr); + } while (--count); + } +} + +extern void __iomem *ioport_map(unsigned long port, unsigned int len); +extern void ioport_unmap(void __iomem *addr); + +#else + /* - * The Tile architecture does not support IOPORT, even with PCI. + * The TilePro architecture does not support IOPORT, even with PCI. * Unfortunately we can't yet simply not declare these methods, * since some generic code that compiles into the kernel, but * we never run, uses them unconditionally. @@ -290,7 +391,12 @@ static inline void memcpy_toio(volatile void __iomem *dst, const void *src, static inline long ioport_panic(void) { +#ifdef __tilegx__ + panic("PCI IO space support is disabled. Configure the kernel with" + " CONFIG_TILE_PCI_IO to enable it"); +#else panic("inb/outb and friends do not exist on tile"); +#endif return 0; } @@ -335,13 +441,6 @@ static inline void outl(u32 b, unsigned long addr) ioport_panic(); } -#define inb_p(addr) inb(addr) -#define inw_p(addr) inw(addr) -#define inl_p(addr) inl(addr) -#define outb_p(x, addr) outb((x), (addr)) -#define outw_p(x, addr) outw((x), (addr)) -#define outl_p(x, addr) outl((x), (addr)) - static inline void insb(unsigned long addr, void *buffer, int count) { ioport_panic(); @@ -372,6 +471,15 @@ static inline void outsl(unsigned long addr, const void *buffer, int count) ioport_panic(); } +#endif /* CHIP_HAS_MMIO() && defined(CONFIG_TILE_PCI_IO) */ + +#define inb_p(addr) inb(addr) +#define inw_p(addr) inw(addr) +#define inl_p(addr) inl(addr) +#define outb_p(x, addr) outb((x), (addr)) +#define outw_p(x, addr) outw((x), (addr)) +#define outl_p(x, addr) outl((x), (addr)) + #define ioread16be(addr) be16_to_cpu(ioread16(addr)) #define ioread32be(addr) be32_to_cpu(ioread32(addr)) #define iowrite16be(v, addr) iowrite16(be16_to_cpu(v), (addr)) diff --git a/arch/tile/include/asm/pci.h b/arch/tile/include/asm/pci.h index cd10e654916e..9cf5308b1657 100644 --- a/arch/tile/include/asm/pci.h +++ b/arch/tile/include/asm/pci.h @@ -144,6 +144,10 @@ struct pci_controller { int pio_mem_index; /* PIO region index for memory access */ +#ifdef CONFIG_TILE_PCI_IO + int pio_io_index; /* PIO region index for I/O space access */ +#endif + /* * Mem-Map regions for all the memory controllers so that Linux can * map all of its physical memory space to the PCI bus. @@ -153,6 +157,10 @@ struct pci_controller { int index; /* PCI domain number */ struct pci_bus *root_bus; + /* PCI I/O space resource for this controller. */ + struct resource io_space; + char io_space_name[32]; + /* PCI memory space resource for this controller. */ struct resource mem_space; char mem_space_name[32]; @@ -210,7 +218,8 @@ static inline int pcibios_assign_all_busses(void) } #define PCIBIOS_MIN_MEM 0 -#define PCIBIOS_MIN_IO 0 +/* Minimum PCI I/O address, starting at the page boundary. */ +#define PCIBIOS_MIN_IO PAGE_SIZE /* Use any cpu for PCI. */ #define cpumask_of_pcibus(bus) cpu_online_mask diff --git a/arch/tile/kernel/pci_gx.c b/arch/tile/kernel/pci_gx.c index bf8c69de2792..fde35891e9a7 100644 --- a/arch/tile/kernel/pci_gx.c +++ b/arch/tile/kernel/pci_gx.c @@ -77,6 +77,9 @@ static int rc_delay[TILEGX_NUM_TRIO][TILEGX_TRIO_PCIES]; /* Default number of seconds that the PCIe RC port probe can be delayed. */ #define DEFAULT_RC_DELAY 10 +/* The PCI I/O space size in each PCI domain. */ +#define IO_SPACE_SIZE 0x10000 + /* Array of the PCIe ports configuration info obtained from the BIB. */ struct pcie_port_property pcie_ports[TILEGX_NUM_TRIO][TILEGX_TRIO_PCIES]; @@ -421,6 +424,17 @@ out: controller->index = i; controller->ops = &tile_cfg_ops; + controller->io_space.start = PCIBIOS_MIN_IO + + (i * IO_SPACE_SIZE); + controller->io_space.end = controller->io_space.start + + IO_SPACE_SIZE - 1; + BUG_ON(controller->io_space.end > IO_SPACE_LIMIT); + controller->io_space.flags = IORESOURCE_IO; + snprintf(controller->io_space_name, + sizeof(controller->io_space_name), + "PCI I/O domain %d", i); + controller->io_space.name = controller->io_space_name; + /* * The PCI memory resource is located above the PA space. * For every host bridge, the BAR window or the MMIO aperture @@ -861,17 +875,16 @@ int __init pcibios_init(void) /* * The PCI memory resource is located above the PA space. * The memory range for the PCI root bus should not overlap - * with the physical RAM + * with the physical RAM. */ pci_add_resource_offset(&resources, &controller->mem_space, controller->mem_offset); - + pci_add_resource(&resources, &controller->io_space); controller->first_busno = next_busno; bus = pci_scan_root_bus(NULL, next_busno, controller->ops, controller, &resources); controller->root_bus = bus; next_busno = bus->busn_res.end + 1; - } /* Do machine dependent PCI interrupt routing */ @@ -915,9 +928,9 @@ int __init pcibios_init(void) pci_controllers[i].mem_resources[0] = *next_bus->resource[0]; pci_controllers[i].mem_resources[1] = - *next_bus->resource[1]; + *next_bus->resource[1]; pci_controllers[i].mem_resources[2] = - *next_bus->resource[2]; + *next_bus->resource[2]; break; } @@ -967,6 +980,39 @@ int __init pcibios_init(void) continue; } +#ifdef CONFIG_TILE_PCI_IO + /* + * Alloc a PIO region for PCI I/O space access for each RC port. + */ + ret = gxio_trio_alloc_pio_regions(trio_context, 1, 0, 0); + if (ret < 0) { + pr_err("PCI: I/O PIO alloc failure on TRIO %d mac %d, " + "give up\n", controller->trio_index, + controller->mac); + + continue; + } + + controller->pio_io_index = ret; + + /* + * For PIO IO, the bus_address_hi parameter is hard-coded 0 + * because PCI I/O address space is 32-bit. + */ + ret = gxio_trio_init_pio_region_aux(trio_context, + controller->pio_io_index, + controller->mac, + 0, + HV_TRIO_PIO_FLAG_IO_SPACE); + if (ret < 0) { + pr_err("PCI: I/O PIO init failure on TRIO %d mac %d, " + "give up\n", controller->trio_index, + controller->mac); + + continue; + } +#endif + /* * Configure a Mem-Map region for each memory controller so * that Linux can map all of its PA space to the PCI bus. @@ -1052,8 +1098,7 @@ char *pcibios_setup(char *str) /* * Enable memory address decoding, as appropriate, for the - * device described by the 'dev' struct. The I/O decoding - * is disabled, though the TILE-Gx supports I/O addressing. + * device described by the 'dev' struct. * * This is called from the generic PCI layer, and can be called * for bridges or endpoints. @@ -1134,10 +1179,77 @@ got_it: * We need to keep the PCI bus address's in-page offset in the VA. */ return iorpc_ioremap(trio_fd, offset, size) + - (phys_addr & (PAGE_SIZE - 1)); + (start & (PAGE_SIZE - 1)); } EXPORT_SYMBOL(ioremap); +#ifdef CONFIG_TILE_PCI_IO +/* Map a PCI I/O address into VA space. */ +void __iomem *ioport_map(unsigned long port, unsigned int size) +{ + struct pci_controller *controller = NULL; + resource_size_t bar_start; + resource_size_t bar_end; + resource_size_t offset; + resource_size_t start; + resource_size_t end; + int trio_fd; + int i; + + start = port; + end = port + size - 1; + + /* + * In the following, each PCI controller's mem_resources[0] + * represents its PCI I/O resource. By searching port in each + * controller's mem_resources[0], we can determine the controller + * that should accept the PCI I/O access. + */ + + for (i = 0; i < num_rc_controllers; i++) { + /* + * Skip controllers that are not properly initialized or + * have down links. + */ + if (pci_controllers[i].root_bus == NULL) + continue; + + bar_start = pci_controllers[i].mem_resources[0].start; + bar_end = pci_controllers[i].mem_resources[0].end; + + if ((start >= bar_start) && (end <= bar_end)) { + + controller = &pci_controllers[i]; + + goto got_it; + } + } + + if (controller == NULL) + return NULL; + +got_it: + trio_fd = controller->trio->fd; + + /* Convert the resource start to the bus address offset. */ + port -= controller->io_space.start; + + offset = HV_TRIO_PIO_OFFSET(controller->pio_io_index) + port; + + /* + * We need to keep the PCI bus address's in-page offset in the VA. + */ + return iorpc_ioremap(trio_fd, offset, size) + (port & (PAGE_SIZE - 1)); +} +EXPORT_SYMBOL(ioport_map); + +void ioport_unmap(void __iomem *addr) +{ + iounmap(addr); +} +EXPORT_SYMBOL(ioport_unmap); +#endif + void pci_iounmap(struct pci_dev *dev, void __iomem *addr) { iounmap(addr); -- 2.34.1