From f28c0ae21d80ffd6eb0987901c5273843387e341 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sun, 24 Aug 2008 02:01:49 -0700 Subject: [PATCH] x86: make apic_32/64.c more like except x2apic, detec_init_APIC, and calibrating_APIC_clock Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic_32.c | 125 ++++++++++++++++++++++++++++++++++---- arch/x86/kernel/apic_64.c | 10 ++- 2 files changed, 122 insertions(+), 13 deletions(-) diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c index 93718ffb9b9c..bfac26a16099 100644 --- a/arch/x86/kernel/apic_32.c +++ b/arch/x86/kernel/apic_32.c @@ -66,6 +66,9 @@ static int __init parse_lapic(char *arg) return 0; } early_param("lapic", parse_lapic); +/* Local APIC was disabled by the BIOS and enabled by the kernel */ +static int enabled_via_apicbase; + #endif #ifdef CONFIG_X86_64 @@ -131,9 +134,6 @@ static struct clock_event_device lapic_clockevent = { }; static DEFINE_PER_CPU(struct clock_event_device, lapic_events); -/* Local APIC was disabled by the BIOS and enabled by the kernel */ -static int enabled_via_apicbase; - static unsigned long apic_phys; /* @@ -240,6 +240,7 @@ void __cpuinit enable_NMI_through_LVT0(void) apic_write(APIC_LVT0, v); } +#ifdef CONFIG_X86_32 /** * get_physical_broadcast - Get number of physical broadcast IDs */ @@ -247,6 +248,7 @@ int get_physical_broadcast(void) { return modern_apic() ? 0xff : 0xf; } +#endif /** * lapic_get_maxlvt - get the maximum number of local vector table entries @@ -1291,6 +1293,32 @@ no_apic: return -1; } +#ifdef CONFIG_X86_64 +void __init early_init_lapic_mapping(void) +{ + unsigned long phys_addr; + + /* + * If no local APIC can be found then go out + * : it means there is no mpatable and MADT + */ + if (!smp_found_config) + return; + + phys_addr = mp_lapic_addr; + + set_fixmap_nocache(FIX_APIC_BASE, phys_addr); + apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n", + APIC_BASE, phys_addr); + + /* + * Fetch the APIC ID of the BSP in case we have a + * default configuration (or the MP table is broken). + */ + boot_cpu_physical_apicid = read_apic_id(); +} +#endif + /** * init_apic_mappings - initialize APIC mappings */ @@ -1308,8 +1336,8 @@ void __init init_apic_mappings(void) apic_phys = mp_lapic_addr; set_fixmap_nocache(FIX_APIC_BASE, apic_phys); - printk(KERN_DEBUG "mapped APIC to %08lx (%08lx)\n", APIC_BASE, - apic_phys); + apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n", + APIC_BASE, apic_phys); /* * Fetch the APIC ID of the BSP in case we have a @@ -1317,14 +1345,12 @@ void __init init_apic_mappings(void) */ if (boot_cpu_physical_apicid == -1U) boot_cpu_physical_apicid = read_apic_id(); - } /* * This initializes the IO-APIC and APIC hardware if this is * a UP kernel. */ - int apic_version[MAX_APICS]; int __init APIC_init_uniprocessor(void) @@ -1682,11 +1708,6 @@ static int lapic_resume(struct sys_device *dev) local_irq_save(flags); -#ifdef CONFIG_X86_64 - if (x2apic) - enable_x2apic(); - else -#endif { /* * Make sure the APICBASE points to the right address @@ -1770,7 +1791,87 @@ static void apic_pm_activate(void) { } #endif /* CONFIG_PM */ +#ifdef CONFIG_X86_64 +/* + * apic_is_clustered_box() -- Check if we can expect good TSC + * + * Thus far, the major user of this is IBM's Summit2 series: + * + * Clustered boxes may have unsynced TSC problems if they are + * multi-chassis. Use available data to take a good guess. + * If in doubt, go HPET. + */ +__cpuinit int apic_is_clustered_box(void) +{ + int i, clusters, zeros; + unsigned id; + u16 *bios_cpu_apicid; + DECLARE_BITMAP(clustermap, NUM_APIC_CLUSTERS); + + /* + * there is not this kind of box with AMD CPU yet. + * Some AMD box with quadcore cpu and 8 sockets apicid + * will be [4, 0x23] or [8, 0x27] could be thought to + * vsmp box still need checking... + */ + if ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) && !is_vsmp_box()) + return 0; + + bios_cpu_apicid = early_per_cpu_ptr(x86_bios_cpu_apicid); + bitmap_zero(clustermap, NUM_APIC_CLUSTERS); + + for (i = 0; i < NR_CPUS; i++) { + /* are we being called early in kernel startup? */ + if (bios_cpu_apicid) { + id = bios_cpu_apicid[i]; + } + else if (i < nr_cpu_ids) { + if (cpu_present(i)) + id = per_cpu(x86_bios_cpu_apicid, i); + else + continue; + } + else + break; + if (id != BAD_APICID) + __set_bit(APIC_CLUSTERID(id), clustermap); + } + + /* Problem: Partially populated chassis may not have CPUs in some of + * the APIC clusters they have been allocated. Only present CPUs have + * x86_bios_cpu_apicid entries, thus causing zeroes in the bitmap. + * Since clusters are allocated sequentially, count zeros only if + * they are bounded by ones. + */ + clusters = 0; + zeros = 0; + for (i = 0; i < NUM_APIC_CLUSTERS; i++) { + if (test_bit(i, clustermap)) { + clusters += 1 + zeros; + zeros = 0; + } else + ++zeros; + } + + /* ScaleMP vSMPowered boxes have one cluster per board and TSCs are + * not guaranteed to be synced between boards + */ + if (is_vsmp_box() && clusters > 1) + return 1; + + /* + * If clusters > 2, then should be multi-chassis. + * May have to revisit this when multi-core + hyperthreaded CPUs come + * out, but AFAIK this will work even for them. + */ + return (clusters > 2); +} +#endif + +/* + * APIC command line parameters + */ static int __init setup_disableapic(char *arg) { disable_apic = 1; diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c index eeb69838c2f8..dca6c246e731 100644 --- a/arch/x86/kernel/apic_64.c +++ b/arch/x86/kernel/apic_64.c @@ -69,6 +69,9 @@ static int __init parse_lapic(char *arg) return 0; } early_param("lapic", parse_lapic); +/* Local APIC was disabled by the BIOS and enabled by the kernel */ +static int enabled_via_apicbase; + #endif #ifdef CONFIG_X86_64 @@ -1279,6 +1282,7 @@ static int __init detect_init_APIC(void) return 0; } +#ifdef CONFIG_X86_64 void __init early_init_lapic_mapping(void) { unsigned long phys_addr; @@ -1302,6 +1306,7 @@ void __init early_init_lapic_mapping(void) */ boot_cpu_physical_apicid = read_apic_id(); } +#endif /** * init_apic_mappings - initialize APIC mappings @@ -1334,7 +1339,8 @@ void __init init_apic_mappings(void) * Fetch the APIC ID of the BSP in case we have a * default configuration (or the MP table is broken). */ - boot_cpu_physical_apicid = read_apic_id(); + if (boot_cpu_physical_apicid == -1U) + boot_cpu_physical_apicid = read_apic_id(); } /* @@ -1782,6 +1788,7 @@ static void apic_pm_activate(void) { } #endif /* CONFIG_PM */ +#ifdef CONFIG_X86_64 /* * apic_is_clustered_box() -- Check if we can expect good TSC * @@ -1857,6 +1864,7 @@ __cpuinit int apic_is_clustered_box(void) */ return (clusters > 2); } +#endif /* * APIC command line parameters -- 2.34.1