From 3f98b6baad63b181da4e859d81953e88ce8a50ec Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Sat, 29 Jun 2013 08:27:54 +0400 Subject: [PATCH] drivers: bus: imx-weim: Add support for i.MX1/21/25/27/31/35/50/51/53 This patch adds WEIM support for all i.MX CPUs supported by the kernel. Signed-off-by: Alexander Shiyan Signed-off-by: Shawn Guo --- .../devicetree/bindings/bus/imx-weim.txt | 17 +++-- drivers/bus/Kconfig | 3 +- drivers/bus/imx-weim.c | 69 ++++++++++++++----- 3 files changed, 66 insertions(+), 23 deletions(-) diff --git a/Documentation/devicetree/bindings/bus/imx-weim.txt b/Documentation/devicetree/bindings/bus/imx-weim.txt index cedc2a9c4785..0fd76c405208 100644 --- a/Documentation/devicetree/bindings/bus/imx-weim.txt +++ b/Documentation/devicetree/bindings/bus/imx-weim.txt @@ -8,7 +8,7 @@ The actual devices are instantiated from the child nodes of a WEIM node. Required properties: - - compatible: Should be set to "fsl,imx6q-weim" + - compatible: Should be set to "fsl,-weim" - reg: A resource specifier for the register space (see the example below) - clocks: the clock, see the example below. @@ -21,11 +21,18 @@ Required properties: Timing property for child nodes. It is mandatory, not optional. - - fsl,weim-cs-timing: The timing array, contains 6 timing values for the + - fsl,weim-cs-timing: The timing array, contains timing values for the child node. We can get the CS index from the child - node's "reg" property. This property contains the values - for the registers EIM_CSnGCR1, EIM_CSnGCR2, EIM_CSnRCR1, - EIM_CSnRCR2, EIM_CSnWCR1, EIM_CSnWCR2 in this order. + node's "reg" property. The number of registers depends + on the selected chip. + For i.MX1, i.MX21 ("fsl,imx1-weim") there are two + registers: CSxU, CSxL. + For i.MX25, i.MX27, i.MX31 and i.MX35 ("fsl,imx27-weim") + there are three registers: CSCRxU, CSCRxL, CSCRxA. + For i.MX50, i.MX53 ("fsl,imx50-weim"), + i.MX51 ("fsl,imx51-weim") and i.MX6Q ("fsl,imx6q-weim") + there are six registers: CSxGCR1, CSxGCR2, CSxRCR1, + CSxRCR2, CSxWCR1, CSxWCR2. Example for an imx6q-sabreauto board, the NOR flash connected to the WEIM: diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig index 1f70e84b442c..552373c4e362 100644 --- a/drivers/bus/Kconfig +++ b/drivers/bus/Kconfig @@ -8,10 +8,9 @@ config IMX_WEIM bool "Freescale EIM DRIVER" depends on ARCH_MXC help - Driver for i.MX6 WEIM controller. + Driver for i.MX WEIM controller. The WEIM(Wireless External Interface Module) works like a bus. You can attach many different devices on it, such as NOR, onenand. - But now, we only support the Parallel NOR. config MVEBU_MBUS bool diff --git a/drivers/bus/imx-weim.c b/drivers/bus/imx-weim.c index dc860a411343..3ef58c8dbf11 100644 --- a/drivers/bus/imx-weim.c +++ b/drivers/bus/imx-weim.c @@ -12,46 +12,83 @@ #include #include +struct imx_weim_devtype { + unsigned int cs_count; + unsigned int cs_regs_count; + unsigned int cs_stride; +}; + +static const struct imx_weim_devtype imx1_weim_devtype = { + .cs_count = 6, + .cs_regs_count = 2, + .cs_stride = 0x08, +}; + +static const struct imx_weim_devtype imx27_weim_devtype = { + .cs_count = 6, + .cs_regs_count = 3, + .cs_stride = 0x10, +}; + +static const struct imx_weim_devtype imx50_weim_devtype = { + .cs_count = 4, + .cs_regs_count = 6, + .cs_stride = 0x18, +}; + +static const struct imx_weim_devtype imx51_weim_devtype = { + .cs_count = 6, + .cs_regs_count = 6, + .cs_stride = 0x18, +}; + static const struct of_device_id weim_id_table[] = { - { .compatible = "fsl,imx6q-weim", }, - {} + /* i.MX1/21 */ + { .compatible = "fsl,imx1-weim", .data = &imx1_weim_devtype, }, + /* i.MX25/27/31/35 */ + { .compatible = "fsl,imx27-weim", .data = &imx27_weim_devtype, }, + /* i.MX50/53/6Q */ + { .compatible = "fsl,imx50-weim", .data = &imx50_weim_devtype, }, + { .compatible = "fsl,imx6q-weim", .data = &imx50_weim_devtype, }, + /* i.MX51 */ + { .compatible = "fsl,imx51-weim", .data = &imx51_weim_devtype, }, + { } }; MODULE_DEVICE_TABLE(of, weim_id_table); -#define CS_TIMING_LEN 6 -#define CS_REG_RANGE 0x18 - /* Parse and set the timing for this device. */ -static int __init weim_timing_setup(struct device_node *np, void __iomem *base) +static int __init weim_timing_setup(struct device_node *np, void __iomem *base, + const struct imx_weim_devtype *devtype) { - u32 value[CS_TIMING_LEN]; - u32 cs_idx; - int ret; - int i; + u32 cs_idx, value[devtype->cs_regs_count]; + int i, ret; /* get the CS index from this child node's "reg" property. */ ret = of_property_read_u32(np, "reg", &cs_idx); if (ret) return ret; - /* The weim has four chip selects. */ - if (cs_idx > 3) + if (cs_idx >= devtype->cs_count) return -EINVAL; ret = of_property_read_u32_array(np, "fsl,weim-cs-timing", - value, CS_TIMING_LEN); + value, devtype->cs_regs_count); if (ret) return ret; /* set the timing for WEIM */ - for (i = 0; i < CS_TIMING_LEN; i++) - writel(value[i], base + cs_idx * CS_REG_RANGE + i * 4); + for (i = 0; i < devtype->cs_regs_count; i++) + writel(value[i], base + cs_idx * devtype->cs_stride + i * 4); + return 0; } static int __init weim_parse_dt(struct platform_device *pdev, void __iomem *base) { + const struct of_device_id *of_id = of_match_device(weim_id_table, + &pdev->dev); + const struct imx_weim_devtype *devtype = of_id->data; struct device_node *child; int ret; @@ -59,7 +96,7 @@ static int __init weim_parse_dt(struct platform_device *pdev, if (!child->name) continue; - ret = weim_timing_setup(child, base); + ret = weim_timing_setup(child, base, devtype); if (ret) { dev_err(&pdev->dev, "%s set timing failed.\n", child->full_name); -- 2.34.1