From 7c62f5a11c2c7f5a6a93a41d5fb1084ebd125d9a Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sat, 15 Dec 2012 23:34:09 -0300 Subject: [PATCH] [media] cx23885: add basic DVB-S2 support for Hauppauge HVR-4400 Add basic DVB-S2 support for the Hauppauge HVR-4400 PCIe board. Thanks to Antti Palosaari and Devin Heitmueller for their suggestions and testing. Signed-off-by: Michael Krufky Reviewed-by: Devin Heitmueller Reviewed-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/pci/cx23885/Kconfig | 2 ++ drivers/media/pci/cx23885/cx23885-cards.c | 38 ++++++++++++++++++++++- drivers/media/pci/cx23885/cx23885-dvb.c | 27 ++++++++++++++++ drivers/media/pci/cx23885/cx23885.h | 1 + 4 files changed, 67 insertions(+), 1 deletion(-) diff --git a/drivers/media/pci/cx23885/Kconfig b/drivers/media/pci/cx23885/Kconfig index eafa1144b17d..733d6c8ebe4c 100644 --- a/drivers/media/pci/cx23885/Kconfig +++ b/drivers/media/pci/cx23885/Kconfig @@ -26,6 +26,8 @@ config VIDEO_CX23885 select DVB_STV0900 if MEDIA_SUBDRV_AUTOSELECT select DVB_DS3000 if MEDIA_SUBDRV_AUTOSELECT select DVB_STV0367 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA10071 if MEDIA_SUBDRV_AUTOSELECT + select DVB_A8293 if MEDIA_SUBDRV_AUTOSELECT select MEDIA_TUNER_MT2063 if MEDIA_SUBDRV_AUTOSELECT select MEDIA_TUNER_MT2131 if MEDIA_SUBDRV_AUTOSELECT select MEDIA_TUNER_XC2028 if MEDIA_SUBDRV_AUTOSELECT diff --git a/drivers/media/pci/cx23885/cx23885-cards.c b/drivers/media/pci/cx23885/cx23885-cards.c index 6277e145f0b8..7a79a17105c4 100644 --- a/drivers/media/pci/cx23885/cx23885-cards.c +++ b/drivers/media/pci/cx23885/cx23885-cards.c @@ -572,7 +572,11 @@ struct cx23885_board cx23885_boards[] = { [CX23885_BOARD_PROF_8000] = { .name = "Prof Revolution DVB-S2 8000", .portb = CX23885_MPEG_DVB, - } + }, + [CX23885_BOARD_HAUPPAUGE_HVR4400] = { + .name = "Hauppauge WinTV-HVR4400", + .portb = CX23885_MPEG_DVB, + }, }; const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards); @@ -788,6 +792,22 @@ struct cx23885_subid cx23885_subids[] = { .subvendor = 0x8000, .subdevice = 0x3034, .card = CX23885_BOARD_PROF_8000, + }, { + .subvendor = 0x0070, + .subdevice = 0xc108, + .card = CX23885_BOARD_HAUPPAUGE_HVR4400, + }, { + .subvendor = 0x0070, + .subdevice = 0xc138, + .card = CX23885_BOARD_HAUPPAUGE_HVR4400, + }, { + .subvendor = 0x0070, + .subdevice = 0xc12a, + .card = CX23885_BOARD_HAUPPAUGE_HVR4400, + }, { + .subvendor = 0x0070, + .subdevice = 0xc1f8, + .card = CX23885_BOARD_HAUPPAUGE_HVR4400, }, }; const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids); @@ -1301,6 +1321,16 @@ void cx23885_gpio_setup(struct cx23885_dev *dev) /* enable irq */ cx_write(GPIO_ISM, 0x00000000);/* INTERRUPTS active low*/ break; + case CX23885_BOARD_HAUPPAUGE_HVR4400: + /* GPIO-8 tda10071 demod reset */ + + /* Put the parts into reset and back */ + cx23885_gpio_enable(dev, GPIO_8, 1); + cx23885_gpio_clear(dev, GPIO_8); + mdelay(100); + cx23885_gpio_set(dev, GPIO_8); + mdelay(100); + break; } } @@ -1509,6 +1539,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_HAUPPAUGE_HVR1210: case CX23885_BOARD_HAUPPAUGE_HVR1850: case CX23885_BOARD_HAUPPAUGE_HVR1290: + case CX23885_BOARD_HAUPPAUGE_HVR4400: if (dev->i2c_bus[0].i2c_rc == 0) hauppauge_eeprom(dev, eeprom+0xc0); break; @@ -1581,6 +1612,11 @@ void cx23885_card_setup(struct cx23885_dev *dev) ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; break; + case CX23885_BOARD_HAUPPAUGE_HVR4400: + ts1->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ + ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */ + ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; + break; case CX23885_BOARD_HAUPPAUGE_HVR1250: case CX23885_BOARD_HAUPPAUGE_HVR1500: case CX23885_BOARD_HAUPPAUGE_HVR1500Q: diff --git a/drivers/media/pci/cx23885/cx23885-dvb.c b/drivers/media/pci/cx23885/cx23885-dvb.c index 2f5b902e63ae..cf84c534f005 100644 --- a/drivers/media/pci/cx23885/cx23885-dvb.c +++ b/drivers/media/pci/cx23885/cx23885-dvb.c @@ -66,6 +66,8 @@ #include "stv090x.h" #include "stb6100.h" #include "stb6100_cfg.h" +#include "tda10071.h" +#include "a8293.h" static unsigned int debug; @@ -659,6 +661,20 @@ static struct mt2063_config terratec_mt2063_config[] = { }, }; +static const struct tda10071_config hauppauge_tda10071_config = { + .i2c_address = 0x05, + .tuner_i2c_addr = 0x54, + .i2c_wr_max = 64, + .ts_mode = TDA10071_TS_SERIAL, + .spec_inv = 0, + .xtal = 40444000, /* 40.444 MHz */ + .pll_multiplier = 20, +}; + +static const struct a8293_config hauppauge_a8293_config = { + .i2c_addr = 0x0b, +}; + static int netup_altera_fpga_rw(void *device, int flag, int data, int read) { struct cx23885_dev *dev = (struct cx23885_dev *)device; @@ -1242,6 +1258,17 @@ static int dvb_register(struct cx23885_tsport *port) fe0->dvb.frontend->ops.set_voltage = p8000_set_voltage; } break; + case CX23885_BOARD_HAUPPAUGE_HVR4400: + i2c_bus = &dev->i2c_bus[0]; + fe0->dvb.frontend = dvb_attach(tda10071_attach, + &hauppauge_tda10071_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(a8293_attach, fe0->dvb.frontend, + &i2c_bus->i2c_adap, + &hauppauge_a8293_config); + } + break; default: printk(KERN_INFO "%s: The frontend of your DVB/ATSC card " " isn't supported yet\n", diff --git a/drivers/media/pci/cx23885/cx23885.h b/drivers/media/pci/cx23885/cx23885.h index 67f40d31450b..61889b25a2af 100644 --- a/drivers/media/pci/cx23885/cx23885.h +++ b/drivers/media/pci/cx23885/cx23885.h @@ -91,6 +91,7 @@ #define CX23885_BOARD_TEVII_S471 35 #define CX23885_BOARD_HAUPPAUGE_HVR1255_22111 36 #define CX23885_BOARD_PROF_8000 37 +#define CX23885_BOARD_HAUPPAUGE_HVR4400 38 #define GPIO_0 0x00000001 #define GPIO_1 0x00000002 -- 2.34.1