From 1b1247dd75aa5cf5fae54a3bec7280046e9c7957 Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Tue, 28 Feb 2012 18:35:17 +0530 Subject: [PATCH] mfd: Add support for RICOH PMIC RC5T583 Ricoh power management IC RC5T583 contains is multi functional device having multiple sub devices inside this. This device has multiple dcdc/ldo regulators, gpios, interrupt controllers, on-key, RTCs, ADCs. This device have 4 DCDCs, 8 LDOs, 8 GPIOs, 6 ADCs, 3 RTCs etc. Signed-off-by: Laxman Dewangan Signed-off-by: Samuel Ortiz --- drivers/mfd/Kconfig | 14 ++ drivers/mfd/Makefile | 1 + drivers/mfd/rc5t583-irq.c | 408 ++++++++++++++++++++++++++++++++++++ drivers/mfd/rc5t583.c | 386 ++++++++++++++++++++++++++++++++++ include/linux/mfd/rc5t583.h | 295 ++++++++++++++++++++++++++ 5 files changed, 1104 insertions(+) create mode 100644 drivers/mfd/rc5t583-irq.c create mode 100644 drivers/mfd/rc5t583.c create mode 100644 include/linux/mfd/rc5t583.h diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 82da44877cdc..0f593966a310 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -846,6 +846,20 @@ config MFD_INTEL_MSIC Passage) chip. This chip embeds audio, battery, GPIO, etc. devices used in Intel Medfield platforms. +config MFD_RC5T583 + bool "Ricoh RC5T583 Power Management system device" + depends on I2C && GENERIC_HARDIRQS + select MFD_CORE + select REGMAP_I2C + help + Select this option to get support for the RICOH583 Power + Management system device. + This driver provides common support for accessing the device + through i2c interface. The device supports multiple sub-devices + like GPIO, interrupts, RTC, LDO and DCDC regulators, onkey. + Additional drivers must be enabled in order to use the + different functionality of the device. + endmenu endif diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 27430d3e839c..ea0bb809739e 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -112,4 +112,5 @@ obj-$(CONFIG_MFD_PM8XXX_IRQ) += pm8xxx-irq.o obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o obj-$(CONFIG_MFD_AAT2870_CORE) += aat2870-core.o obj-$(CONFIG_MFD_INTEL_MSIC) += intel_msic.o +obj-$(CONFIG_MFD_RC5T583) += rc5t583.o rc5t583-irq.o obj-$(CONFIG_MFD_S5M_CORE) += s5m-core.o s5m-irq.o diff --git a/drivers/mfd/rc5t583-irq.c b/drivers/mfd/rc5t583-irq.c new file mode 100644 index 000000000000..fa6f80fad5f1 --- /dev/null +++ b/drivers/mfd/rc5t583-irq.c @@ -0,0 +1,408 @@ +/* + * Interrupt driver for RICOH583 power management chip. + * + * Copyright (c) 2011-2012, NVIDIA CORPORATION. All rights reserved. + * Author: Laxman dewangan + * + * based on code + * Copyright (C) 2011 RICOH COMPANY,LTD + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#include +#include +#include +#include +#include + +enum int_type { + SYS_INT = 0x1, + DCDC_INT = 0x2, + RTC_INT = 0x4, + ADC_INT = 0x8, + GPIO_INT = 0x10, +}; + +static int gpedge_add[] = { + RC5T583_GPIO_GPEDGE2, + RC5T583_GPIO_GPEDGE2 +}; + +static int irq_en_add[] = { + RC5T583_INT_EN_SYS1, + RC5T583_INT_EN_SYS2, + RC5T583_INT_EN_DCDC, + RC5T583_INT_EN_RTC, + RC5T583_INT_EN_ADC1, + RC5T583_INT_EN_ADC2, + RC5T583_INT_EN_ADC3, + RC5T583_GPIO_EN_INT +}; + +static int irq_mon_add[] = { + RC5T583_INT_MON_SYS1, + RC5T583_INT_MON_SYS2, + RC5T583_INT_MON_DCDC, + RC5T583_INT_MON_RTC, + RC5T583_INT_IR_ADCL, + RC5T583_INT_IR_ADCH, + RC5T583_INT_IR_ADCEND, + RC5T583_INT_IR_GPIOF, + RC5T583_INT_IR_GPIOR +}; + +static int irq_clr_add[] = { + RC5T583_INT_IR_SYS1, + RC5T583_INT_IR_SYS2, + RC5T583_INT_IR_DCDC, + RC5T583_INT_IR_RTC, + RC5T583_INT_IR_ADCL, + RC5T583_INT_IR_ADCH, + RC5T583_INT_IR_ADCEND, + RC5T583_INT_IR_GPIOF, + RC5T583_INT_IR_GPIOR +}; + +static int main_int_type[] = { + SYS_INT, + SYS_INT, + DCDC_INT, + RTC_INT, + ADC_INT, + ADC_INT, + ADC_INT, + GPIO_INT, + GPIO_INT, +}; + +struct rc5t583_irq_data { + u8 int_type; + u8 master_bit; + u8 int_en_bit; + u8 mask_reg_index; + int grp_index; +}; + +#define RC5T583_IRQ(_int_type, _master_bit, _grp_index, \ + _int_bit, _mask_ind) \ + { \ + .int_type = _int_type, \ + .master_bit = _master_bit, \ + .grp_index = _grp_index, \ + .int_en_bit = _int_bit, \ + .mask_reg_index = _mask_ind, \ + } + +static const struct rc5t583_irq_data rc5t583_irqs[RC5T583_MAX_IRQS] = { + [RC5T583_IRQ_ONKEY] = RC5T583_IRQ(SYS_INT, 0, 0, 0, 0), + [RC5T583_IRQ_ACOK] = RC5T583_IRQ(SYS_INT, 0, 1, 1, 0), + [RC5T583_IRQ_LIDOPEN] = RC5T583_IRQ(SYS_INT, 0, 2, 2, 0), + [RC5T583_IRQ_PREOT] = RC5T583_IRQ(SYS_INT, 0, 3, 3, 0), + [RC5T583_IRQ_CLKSTP] = RC5T583_IRQ(SYS_INT, 0, 4, 4, 0), + [RC5T583_IRQ_ONKEY_OFF] = RC5T583_IRQ(SYS_INT, 0, 5, 5, 0), + [RC5T583_IRQ_WD] = RC5T583_IRQ(SYS_INT, 0, 7, 7, 0), + [RC5T583_IRQ_EN_PWRREQ1] = RC5T583_IRQ(SYS_INT, 0, 8, 0, 1), + [RC5T583_IRQ_EN_PWRREQ2] = RC5T583_IRQ(SYS_INT, 0, 9, 1, 1), + [RC5T583_IRQ_PRE_VINDET] = RC5T583_IRQ(SYS_INT, 0, 10, 2, 1), + + [RC5T583_IRQ_DC0LIM] = RC5T583_IRQ(DCDC_INT, 1, 0, 0, 2), + [RC5T583_IRQ_DC1LIM] = RC5T583_IRQ(DCDC_INT, 1, 1, 1, 2), + [RC5T583_IRQ_DC2LIM] = RC5T583_IRQ(DCDC_INT, 1, 2, 2, 2), + [RC5T583_IRQ_DC3LIM] = RC5T583_IRQ(DCDC_INT, 1, 3, 3, 2), + + [RC5T583_IRQ_CTC] = RC5T583_IRQ(RTC_INT, 2, 0, 0, 3), + [RC5T583_IRQ_YALE] = RC5T583_IRQ(RTC_INT, 2, 5, 5, 3), + [RC5T583_IRQ_DALE] = RC5T583_IRQ(RTC_INT, 2, 6, 6, 3), + [RC5T583_IRQ_WALE] = RC5T583_IRQ(RTC_INT, 2, 7, 7, 3), + + [RC5T583_IRQ_AIN1L] = RC5T583_IRQ(ADC_INT, 3, 0, 0, 4), + [RC5T583_IRQ_AIN2L] = RC5T583_IRQ(ADC_INT, 3, 1, 1, 4), + [RC5T583_IRQ_AIN3L] = RC5T583_IRQ(ADC_INT, 3, 2, 2, 4), + [RC5T583_IRQ_VBATL] = RC5T583_IRQ(ADC_INT, 3, 3, 3, 4), + [RC5T583_IRQ_VIN3L] = RC5T583_IRQ(ADC_INT, 3, 4, 4, 4), + [RC5T583_IRQ_VIN8L] = RC5T583_IRQ(ADC_INT, 3, 5, 5, 4), + [RC5T583_IRQ_AIN1H] = RC5T583_IRQ(ADC_INT, 3, 6, 0, 5), + [RC5T583_IRQ_AIN2H] = RC5T583_IRQ(ADC_INT, 3, 7, 1, 5), + [RC5T583_IRQ_AIN3H] = RC5T583_IRQ(ADC_INT, 3, 8, 2, 5), + [RC5T583_IRQ_VBATH] = RC5T583_IRQ(ADC_INT, 3, 9, 3, 5), + [RC5T583_IRQ_VIN3H] = RC5T583_IRQ(ADC_INT, 3, 10, 4, 5), + [RC5T583_IRQ_VIN8H] = RC5T583_IRQ(ADC_INT, 3, 11, 5, 5), + [RC5T583_IRQ_ADCEND] = RC5T583_IRQ(ADC_INT, 3, 12, 0, 6), + + [RC5T583_IRQ_GPIO0] = RC5T583_IRQ(GPIO_INT, 4, 0, 0, 7), + [RC5T583_IRQ_GPIO1] = RC5T583_IRQ(GPIO_INT, 4, 1, 1, 7), + [RC5T583_IRQ_GPIO2] = RC5T583_IRQ(GPIO_INT, 4, 2, 2, 7), + [RC5T583_IRQ_GPIO3] = RC5T583_IRQ(GPIO_INT, 4, 3, 3, 7), + [RC5T583_IRQ_GPIO4] = RC5T583_IRQ(GPIO_INT, 4, 4, 4, 7), + [RC5T583_IRQ_GPIO5] = RC5T583_IRQ(GPIO_INT, 4, 5, 5, 7), + [RC5T583_IRQ_GPIO6] = RC5T583_IRQ(GPIO_INT, 4, 6, 6, 7), + [RC5T583_IRQ_GPIO7] = RC5T583_IRQ(GPIO_INT, 4, 7, 7, 7), +}; + +static void rc5t583_irq_lock(struct irq_data *irq_data) +{ + struct rc5t583 *rc5t583 = irq_data_get_irq_chip_data(irq_data); + mutex_lock(&rc5t583->irq_lock); +} + +static void rc5t583_irq_unmask(struct irq_data *irq_data) +{ + struct rc5t583 *rc5t583 = irq_data_get_irq_chip_data(irq_data); + unsigned int __irq = irq_data->irq - rc5t583->irq_base; + const struct rc5t583_irq_data *data = &rc5t583_irqs[__irq]; + + rc5t583->group_irq_en[data->grp_index] |= 1 << data->grp_index; + rc5t583->intc_inten_reg |= 1 << data->master_bit; + rc5t583->irq_en_reg[data->mask_reg_index] |= 1 << data->int_en_bit; +} + +static void rc5t583_irq_mask(struct irq_data *irq_data) +{ + struct rc5t583 *rc5t583 = irq_data_get_irq_chip_data(irq_data); + unsigned int __irq = irq_data->irq - rc5t583->irq_base; + const struct rc5t583_irq_data *data = &rc5t583_irqs[__irq]; + + rc5t583->group_irq_en[data->grp_index] &= ~(1 << data->grp_index); + if (!rc5t583->group_irq_en[data->grp_index]) + rc5t583->intc_inten_reg &= ~(1 << data->master_bit); + + rc5t583->irq_en_reg[data->mask_reg_index] &= ~(1 << data->int_en_bit); +} + +static int rc5t583_irq_set_type(struct irq_data *irq_data, unsigned int type) +{ + struct rc5t583 *rc5t583 = irq_data_get_irq_chip_data(irq_data); + unsigned int __irq = irq_data->irq - rc5t583->irq_base; + const struct rc5t583_irq_data *data = &rc5t583_irqs[__irq]; + int val = 0; + int gpedge_index; + int gpedge_bit_pos; + + /* Supporting only trigger level inetrrupt */ + if ((data->int_type & GPIO_INT) && (type & IRQ_TYPE_EDGE_BOTH)) { + gpedge_index = data->int_en_bit / 4; + gpedge_bit_pos = data->int_en_bit % 4; + + if (type & IRQ_TYPE_EDGE_FALLING) + val |= 0x2; + + if (type & IRQ_TYPE_EDGE_RISING) + val |= 0x1; + + rc5t583->gpedge_reg[gpedge_index] &= ~(3 << gpedge_bit_pos); + rc5t583->gpedge_reg[gpedge_index] |= (val << gpedge_bit_pos); + rc5t583_irq_unmask(irq_data); + return 0; + } + return -EINVAL; +} + +static void rc5t583_irq_sync_unlock(struct irq_data *irq_data) +{ + struct rc5t583 *rc5t583 = irq_data_get_irq_chip_data(irq_data); + int i; + int ret; + + for (i = 0; i < ARRAY_SIZE(rc5t583->gpedge_reg); i++) { + ret = rc5t583_write(rc5t583->dev, gpedge_add[i], + rc5t583->gpedge_reg[i]); + if (ret < 0) + dev_warn(rc5t583->dev, + "Error in writing reg 0x%02x error: %d\n", + gpedge_add[i], ret); + } + + for (i = 0; i < ARRAY_SIZE(rc5t583->irq_en_reg); i++) { + ret = rc5t583_write(rc5t583->dev, irq_en_add[i], + rc5t583->irq_en_reg[i]); + if (ret < 0) + dev_warn(rc5t583->dev, + "Error in writing reg 0x%02x error: %d\n", + irq_en_add[i], ret); + } + + ret = rc5t583_write(rc5t583->dev, RC5T583_INTC_INTEN, + rc5t583->intc_inten_reg); + if (ret < 0) + dev_warn(rc5t583->dev, + "Error in writing reg 0x%02x error: %d\n", + RC5T583_INTC_INTEN, ret); + + mutex_unlock(&rc5t583->irq_lock); +} +#ifdef CONFIG_PM_SLEEP +static int rc5t583_irq_set_wake(struct irq_data *irq_data, unsigned int on) +{ + struct rc5t583 *rc5t583 = irq_data_get_irq_chip_data(irq_data); + return irq_set_irq_wake(rc5t583->chip_irq, on); +} +#else +#define rc5t583_irq_set_wake NULL +#endif + +static irqreturn_t rc5t583_irq(int irq, void *data) +{ + struct rc5t583 *rc5t583 = data; + uint8_t int_sts[RC5T583_MAX_INTERRUPT_MASK_REGS]; + uint8_t master_int; + int i; + int ret; + unsigned int rtc_int_sts = 0; + + /* Clear the status */ + for (i = 0; i < RC5T583_MAX_INTERRUPT_MASK_REGS; i++) + int_sts[i] = 0; + + ret = rc5t583_read(rc5t583->dev, RC5T583_INTC_INTMON, &master_int); + if (ret < 0) { + dev_err(rc5t583->dev, + "Error in reading reg 0x%02x error: %d\n", + RC5T583_INTC_INTMON, ret); + return IRQ_HANDLED; + } + + for (i = 0; i < RC5T583_MAX_INTERRUPT_MASK_REGS; ++i) { + if (!(master_int & main_int_type[i])) + continue; + + ret = rc5t583_read(rc5t583->dev, irq_mon_add[i], &int_sts[i]); + if (ret < 0) { + dev_warn(rc5t583->dev, + "Error in reading reg 0x%02x error: %d\n", + irq_mon_add[i], ret); + int_sts[i] = 0; + continue; + } + + if (main_int_type[i] & RTC_INT) { + rtc_int_sts = 0; + if (int_sts[i] & 0x1) + rtc_int_sts |= BIT(6); + if (int_sts[i] & 0x2) + rtc_int_sts |= BIT(7); + if (int_sts[i] & 0x4) + rtc_int_sts |= BIT(0); + if (int_sts[i] & 0x8) + rtc_int_sts |= BIT(5); + } + + ret = rc5t583_write(rc5t583->dev, irq_clr_add[i], + ~int_sts[i]); + if (ret < 0) + dev_warn(rc5t583->dev, + "Error in reading reg 0x%02x error: %d\n", + irq_clr_add[i], ret); + + if (main_int_type[i] & RTC_INT) + int_sts[i] = rtc_int_sts; + } + + /* Merge gpio interrupts for rising and falling case*/ + int_sts[7] |= int_sts[8]; + + /* Call interrupt handler if enabled */ + for (i = 0; i < RC5T583_MAX_IRQS; ++i) { + const struct rc5t583_irq_data *data = &rc5t583_irqs[i]; + if ((int_sts[data->mask_reg_index] & (1 << data->int_en_bit)) && + (rc5t583->group_irq_en[data->master_bit] & + (1 << data->grp_index))) + handle_nested_irq(rc5t583->irq_base + i); + } + + return IRQ_HANDLED; +} + +static struct irq_chip rc5t583_irq_chip = { + .name = "rc5t583-irq", + .irq_mask = rc5t583_irq_mask, + .irq_unmask = rc5t583_irq_unmask, + .irq_bus_lock = rc5t583_irq_lock, + .irq_bus_sync_unlock = rc5t583_irq_sync_unlock, + .irq_set_type = rc5t583_irq_set_type, + .irq_set_wake = rc5t583_irq_set_wake, +}; + +int rc5t583_irq_init(struct rc5t583 *rc5t583, int irq, int irq_base) +{ + int i, ret; + + if (!irq_base) { + dev_warn(rc5t583->dev, "No interrupt support on IRQ base\n"); + return -EINVAL; + } + + mutex_init(&rc5t583->irq_lock); + + /* Initailize all int register to 0 */ + for (i = 0; i < RC5T583_MAX_INTERRUPT_MASK_REGS; i++) { + ret = rc5t583_write(rc5t583->dev, irq_en_add[i], + rc5t583->irq_en_reg[i]); + if (ret < 0) + dev_warn(rc5t583->dev, + "Error in writing reg 0x%02x error: %d\n", + irq_en_add[i], ret); + } + + for (i = 0; i < RC5T583_MAX_GPEDGE_REG; i++) { + ret = rc5t583_write(rc5t583->dev, gpedge_add[i], + rc5t583->gpedge_reg[i]); + if (ret < 0) + dev_warn(rc5t583->dev, + "Error in writing reg 0x%02x error: %d\n", + gpedge_add[i], ret); + } + + ret = rc5t583_write(rc5t583->dev, RC5T583_INTC_INTEN, 0x0); + if (ret < 0) + dev_warn(rc5t583->dev, + "Error in writing reg 0x%02x error: %d\n", + RC5T583_INTC_INTEN, ret); + + /* Clear all interrupts in case they woke up active. */ + for (i = 0; i < RC5T583_MAX_INTERRUPT_MASK_REGS; i++) { + ret = rc5t583_write(rc5t583->dev, irq_clr_add[i], 0); + if (ret < 0) + dev_warn(rc5t583->dev, + "Error in writing reg 0x%02x error: %d\n", + irq_clr_add[i], ret); + } + + rc5t583->irq_base = irq_base; + rc5t583->chip_irq = irq; + + for (i = 0; i < RC5T583_MAX_IRQS; i++) { + int __irq = i + rc5t583->irq_base; + irq_set_chip_data(__irq, rc5t583); + irq_set_chip_and_handler(__irq, &rc5t583_irq_chip, + handle_simple_irq); + irq_set_nested_thread(__irq, 1); +#ifdef CONFIG_ARM + set_irq_flags(__irq, IRQF_VALID); +#endif + } + + ret = request_threaded_irq(irq, NULL, rc5t583_irq, IRQF_ONESHOT, + "rc5t583", rc5t583); + if (ret < 0) + dev_err(rc5t583->dev, + "Error in registering interrupt error: %d\n", ret); + return ret; +} + +int rc5t583_irq_exit(struct rc5t583 *rc5t583) +{ + if (rc5t583->chip_irq) + free_irq(rc5t583->chip_irq, rc5t583); + return 0; +} diff --git a/drivers/mfd/rc5t583.c b/drivers/mfd/rc5t583.c new file mode 100644 index 000000000000..99ef944c621d --- /dev/null +++ b/drivers/mfd/rc5t583.c @@ -0,0 +1,386 @@ +/* + * Core driver access RC5T583 power management chip. + * + * Copyright (c) 2011-2012, NVIDIA CORPORATION. All rights reserved. + * Author: Laxman dewangan + * + * Based on code + * Copyright (C) 2011 RICOH COMPANY,LTD + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define RICOH_ONOFFSEL_REG 0x10 +#define RICOH_SWCTL_REG 0x5E + +struct deepsleep_control_data { + u8 reg_add; + u8 ds_pos_bit; +}; + +#define DEEPSLEEP_INIT(_id, _reg, _pos) \ + { \ + .reg_add = RC5T583_##_reg, \ + .ds_pos_bit = _pos, \ + } + +static struct deepsleep_control_data deepsleep_data[] = { + DEEPSLEEP_INIT(DC0, SLPSEQ1, 0), + DEEPSLEEP_INIT(DC1, SLPSEQ1, 4), + DEEPSLEEP_INIT(DC2, SLPSEQ2, 0), + DEEPSLEEP_INIT(DC3, SLPSEQ2, 4), + DEEPSLEEP_INIT(LDO0, SLPSEQ3, 0), + DEEPSLEEP_INIT(LDO1, SLPSEQ3, 4), + DEEPSLEEP_INIT(LDO2, SLPSEQ4, 0), + DEEPSLEEP_INIT(LDO3, SLPSEQ4, 4), + DEEPSLEEP_INIT(LDO4, SLPSEQ5, 0), + DEEPSLEEP_INIT(LDO5, SLPSEQ5, 4), + DEEPSLEEP_INIT(LDO6, SLPSEQ6, 0), + DEEPSLEEP_INIT(LDO7, SLPSEQ6, 4), + DEEPSLEEP_INIT(LDO8, SLPSEQ7, 0), + DEEPSLEEP_INIT(LDO9, SLPSEQ7, 4), + DEEPSLEEP_INIT(PSO0, SLPSEQ8, 0), + DEEPSLEEP_INIT(PSO1, SLPSEQ8, 4), + DEEPSLEEP_INIT(PSO2, SLPSEQ9, 0), + DEEPSLEEP_INIT(PSO3, SLPSEQ9, 4), + DEEPSLEEP_INIT(PSO4, SLPSEQ10, 0), + DEEPSLEEP_INIT(PSO5, SLPSEQ10, 4), + DEEPSLEEP_INIT(PSO6, SLPSEQ11, 0), + DEEPSLEEP_INIT(PSO7, SLPSEQ11, 4), +}; + +#define EXT_PWR_REQ \ + (RC5T583_EXT_PWRREQ1_CONTROL | RC5T583_EXT_PWRREQ2_CONTROL) + +static struct mfd_cell rc5t583_subdevs[] = { + {.name = "rc5t583-regulator",}, + {.name = "rc5t583-rtc", }, + {.name = "rc5t583-key", } +}; + +int rc5t583_write(struct device *dev, uint8_t reg, uint8_t val) +{ + struct rc5t583 *rc5t583 = dev_get_drvdata(dev); + return regmap_write(rc5t583->regmap, reg, val); +} + +int rc5t583_read(struct device *dev, uint8_t reg, uint8_t *val) +{ + struct rc5t583 *rc5t583 = dev_get_drvdata(dev); + unsigned int ival; + int ret; + ret = regmap_read(rc5t583->regmap, reg, &ival); + if (!ret) + *val = (uint8_t)ival; + return ret; +} + +int rc5t583_set_bits(struct device *dev, unsigned int reg, + unsigned int bit_mask) +{ + struct rc5t583 *rc5t583 = dev_get_drvdata(dev); + return regmap_update_bits(rc5t583->regmap, reg, bit_mask, bit_mask); +} + +int rc5t583_clear_bits(struct device *dev, unsigned int reg, + unsigned int bit_mask) +{ + struct rc5t583 *rc5t583 = dev_get_drvdata(dev); + return regmap_update_bits(rc5t583->regmap, reg, bit_mask, 0); +} + +int rc5t583_update(struct device *dev, unsigned int reg, + unsigned int val, unsigned int mask) +{ + struct rc5t583 *rc5t583 = dev_get_drvdata(dev); + return regmap_update_bits(rc5t583->regmap, reg, mask, val); +} + +static int __rc5t583_set_ext_pwrreq1_control(struct device *dev, + int id, int ext_pwr, int slots) +{ + int ret; + uint8_t sleepseq_val; + unsigned int en_bit; + unsigned int slot_bit; + + if (id == RC5T583_DS_DC0) { + dev_err(dev, "PWRREQ1 is invalid control for rail %d\n", id); + return -EINVAL; + } + + en_bit = deepsleep_data[id].ds_pos_bit; + slot_bit = en_bit + 1; + ret = rc5t583_read(dev, deepsleep_data[id].reg_add, &sleepseq_val); + if (ret < 0) { + dev_err(dev, "Error in reading reg 0x%x\n", + deepsleep_data[id].reg_add); + return ret; + } + + sleepseq_val &= ~(0xF << en_bit); + sleepseq_val |= BIT(en_bit); + sleepseq_val |= ((slots & 0x7) << slot_bit); + ret = rc5t583_set_bits(dev, RICOH_ONOFFSEL_REG, BIT(1)); + if (ret < 0) { + dev_err(dev, "Error in updating the 0x%02x register\n", + RICOH_ONOFFSEL_REG); + return ret; + } + + ret = rc5t583_write(dev, deepsleep_data[id].reg_add, sleepseq_val); + if (ret < 0) { + dev_err(dev, "Error in writing reg 0x%x\n", + deepsleep_data[id].reg_add); + return ret; + } + + if (id == RC5T583_DS_LDO4) { + ret = rc5t583_write(dev, RICOH_SWCTL_REG, 0x1); + if (ret < 0) + dev_err(dev, "Error in writing reg 0x%x\n", + RICOH_SWCTL_REG); + } + return ret; +} + +static int __rc5t583_set_ext_pwrreq2_control(struct device *dev, + int id, int ext_pwr) +{ + int ret; + + if (id != RC5T583_DS_DC0) { + dev_err(dev, "PWRREQ2 is invalid control for rail %d\n", id); + return -EINVAL; + } + + ret = rc5t583_set_bits(dev, RICOH_ONOFFSEL_REG, BIT(2)); + if (ret < 0) + dev_err(dev, "Error in updating the ONOFFSEL 0x10 register\n"); + return ret; +} + +int rc5t583_ext_power_req_config(struct device *dev, int ds_id, + int ext_pwr_req, int deepsleep_slot_nr) +{ + if ((ext_pwr_req & EXT_PWR_REQ) == EXT_PWR_REQ) + return -EINVAL; + + if (ext_pwr_req & RC5T583_EXT_PWRREQ1_CONTROL) + return __rc5t583_set_ext_pwrreq1_control(dev, ds_id, + ext_pwr_req, deepsleep_slot_nr); + + if (ext_pwr_req & RC5T583_EXT_PWRREQ2_CONTROL) + return __rc5t583_set_ext_pwrreq2_control(dev, + ds_id, ext_pwr_req); + return 0; +} + +static int rc5t583_clear_ext_power_req(struct rc5t583 *rc5t583, + struct rc5t583_platform_data *pdata) +{ + int ret; + int i; + uint8_t on_off_val = 0; + + /* Clear ONOFFSEL register */ + if (pdata->enable_shutdown) + on_off_val = 0x1; + + ret = rc5t583_write(rc5t583->dev, RICOH_ONOFFSEL_REG, on_off_val); + if (ret < 0) + dev_warn(rc5t583->dev, "Error in writing reg %d error: %d\n", + RICOH_ONOFFSEL_REG, ret); + + ret = rc5t583_write(rc5t583->dev, RICOH_SWCTL_REG, 0x0); + if (ret < 0) + dev_warn(rc5t583->dev, "Error in writing reg %d error: %d\n", + RICOH_SWCTL_REG, ret); + + /* Clear sleep sequence register */ + for (i = RC5T583_SLPSEQ1; i <= RC5T583_SLPSEQ11; ++i) { + ret = rc5t583_write(rc5t583->dev, i, 0x0); + if (ret < 0) + dev_warn(rc5t583->dev, + "Error in writing reg 0x%02x error: %d\n", + i, ret); + } + return 0; +} + +static bool volatile_reg(struct device *dev, unsigned int reg) +{ + /* Enable caching in interrupt registers */ + switch (reg) { + case RC5T583_INT_EN_SYS1: + case RC5T583_INT_EN_SYS2: + case RC5T583_INT_EN_DCDC: + case RC5T583_INT_EN_RTC: + case RC5T583_INT_EN_ADC1: + case RC5T583_INT_EN_ADC2: + case RC5T583_INT_EN_ADC3: + case RC5T583_GPIO_GPEDGE1: + case RC5T583_GPIO_GPEDGE2: + case RC5T583_GPIO_EN_INT: + return false; + + case RC5T583_GPIO_MON_IOIN: + /* This is gpio input register */ + return true; + + default: + /* Enable caching in gpio registers */ + if ((reg >= RC5T583_GPIO_IOSEL) && + (reg <= RC5T583_GPIO_GPOFUNC)) + return false; + + /* Enable caching in sleep seq registers */ + if ((reg >= RC5T583_SLPSEQ1) && (reg <= RC5T583_SLPSEQ11)) + return false; + + /* Enable caching of regulator registers */ + if ((reg >= RC5T583_REG_DC0CTL) && (reg <= RC5T583_REG_SR3CTL)) + return false; + if ((reg >= RC5T583_REG_LDOEN1) && + (reg <= RC5T583_REG_LDO9DAC_DS)) + return false; + + break; + } + + return true; +} + +static const struct regmap_config rc5t583_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .volatile_reg = volatile_reg, + .max_register = RC5T583_MAX_REGS, + .num_reg_defaults_raw = RC5T583_MAX_REGS, + .cache_type = REGCACHE_RBTREE, +}; + +static int __devinit rc5t583_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct rc5t583 *rc5t583; + struct rc5t583_platform_data *pdata = i2c->dev.platform_data; + int ret; + bool irq_init_success = false; + + if (!pdata) { + dev_err(&i2c->dev, "Err: Platform data not found\n"); + return -EINVAL; + } + + rc5t583 = devm_kzalloc(&i2c->dev, sizeof(struct rc5t583), GFP_KERNEL); + if (!rc5t583) { + dev_err(&i2c->dev, "Memory allocation failed\n"); + return -ENOMEM; + } + + rc5t583->dev = &i2c->dev; + i2c_set_clientdata(i2c, rc5t583); + + rc5t583->regmap = regmap_init_i2c(i2c, &rc5t583_regmap_config); + if (IS_ERR(rc5t583->regmap)) { + ret = PTR_ERR(rc5t583->regmap); + dev_err(&i2c->dev, "regmap initialization failed: %d\n", ret); + return ret; + } + + ret = rc5t583_clear_ext_power_req(rc5t583, pdata); + if (ret < 0) + goto err_irq_init; + + if (i2c->irq) { + ret = rc5t583_irq_init(rc5t583, i2c->irq, pdata->irq_base); + /* Still continue with waring if irq init fails */ + if (ret) + dev_warn(&i2c->dev, "IRQ init failed: %d\n", ret); + else + irq_init_success = true; + } + + ret = mfd_add_devices(rc5t583->dev, -1, rc5t583_subdevs, + ARRAY_SIZE(rc5t583_subdevs), NULL, 0); + if (ret) { + dev_err(&i2c->dev, "add mfd devices failed: %d\n", ret); + goto err_add_devs; + } + + return 0; + +err_add_devs: + if (irq_init_success) + rc5t583_irq_exit(rc5t583); +err_irq_init: + regmap_exit(rc5t583->regmap); + return ret; +} + +static int __devexit rc5t583_i2c_remove(struct i2c_client *i2c) +{ + struct rc5t583 *rc5t583 = i2c_get_clientdata(i2c); + + mfd_remove_devices(rc5t583->dev); + rc5t583_irq_exit(rc5t583); + regmap_exit(rc5t583->regmap); + return 0; +} + +static const struct i2c_device_id rc5t583_i2c_id[] = { + {.name = "rc5t583", .driver_data = 0}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, rc5t583_i2c_id); + +static struct i2c_driver rc5t583_i2c_driver = { + .driver = { + .name = "rc5t583", + .owner = THIS_MODULE, + }, + .probe = rc5t583_i2c_probe, + .remove = __devexit_p(rc5t583_i2c_remove), + .id_table = rc5t583_i2c_id, +}; + +static int __init rc5t583_i2c_init(void) +{ + return i2c_add_driver(&rc5t583_i2c_driver); +} +subsys_initcall(rc5t583_i2c_init); + +static void __exit rc5t583_i2c_exit(void) +{ + i2c_del_driver(&rc5t583_i2c_driver); +} + +module_exit(rc5t583_i2c_exit); + +MODULE_AUTHOR("Laxman Dewangan "); +MODULE_DESCRIPTION("RICOH RC5T583 power management system device driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/mfd/rc5t583.h b/include/linux/mfd/rc5t583.h new file mode 100644 index 000000000000..a2c61609d21d --- /dev/null +++ b/include/linux/mfd/rc5t583.h @@ -0,0 +1,295 @@ +/* + * Core driver interface to access RICOH_RC5T583 power management chip. + * + * Copyright (c) 2011-2012, NVIDIA CORPORATION. All rights reserved. + * Author: Laxman dewangan + * + * Based on code + * Copyright (C) 2011 RICOH COMPANY,LTD + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifndef __LINUX_MFD_RC5T583_H +#define __LINUX_MFD_RC5T583_H + +#include +#include + +#define RC5T583_MAX_REGS 0xF8 + +/* Maximum number of main interrupts */ +#define MAX_MAIN_INTERRUPT 5 +#define RC5T583_MAX_GPEDGE_REG 2 +#define RC5T583_MAX_INTERRUPT_MASK_REGS 9 + +/* Interrupt enable register */ +#define RC5T583_INT_EN_SYS1 0x19 +#define RC5T583_INT_EN_SYS2 0x1D +#define RC5T583_INT_EN_DCDC 0x41 +#define RC5T583_INT_EN_RTC 0xED +#define RC5T583_INT_EN_ADC1 0x90 +#define RC5T583_INT_EN_ADC2 0x91 +#define RC5T583_INT_EN_ADC3 0x92 + +/* Interrupt status registers (monitor regs in Ricoh)*/ +#define RC5T583_INTC_INTPOL 0xAD +#define RC5T583_INTC_INTEN 0xAE +#define RC5T583_INTC_INTMON 0xAF + +#define RC5T583_INT_MON_GRP 0xAF +#define RC5T583_INT_MON_SYS1 0x1B +#define RC5T583_INT_MON_SYS2 0x1F +#define RC5T583_INT_MON_DCDC 0x43 +#define RC5T583_INT_MON_RTC 0xEE + +/* Interrupt clearing registers */ +#define RC5T583_INT_IR_SYS1 0x1A +#define RC5T583_INT_IR_SYS2 0x1E +#define RC5T583_INT_IR_DCDC 0x42 +#define RC5T583_INT_IR_RTC 0xEE +#define RC5T583_INT_IR_ADCL 0x94 +#define RC5T583_INT_IR_ADCH 0x95 +#define RC5T583_INT_IR_ADCEND 0x96 +#define RC5T583_INT_IR_GPIOR 0xA9 +#define RC5T583_INT_IR_GPIOF 0xAA + +/* Sleep sequence registers */ +#define RC5T583_SLPSEQ1 0x21 +#define RC5T583_SLPSEQ2 0x22 +#define RC5T583_SLPSEQ3 0x23 +#define RC5T583_SLPSEQ4 0x24 +#define RC5T583_SLPSEQ5 0x25 +#define RC5T583_SLPSEQ6 0x26 +#define RC5T583_SLPSEQ7 0x27 +#define RC5T583_SLPSEQ8 0x28 +#define RC5T583_SLPSEQ9 0x29 +#define RC5T583_SLPSEQ10 0x2A +#define RC5T583_SLPSEQ11 0x2B + +/* Regulator registers */ +#define RC5T583_REG_DC0CTL 0x30 +#define RC5T583_REG_DC0DAC 0x31 +#define RC5T583_REG_DC0LATCTL 0x32 +#define RC5T583_REG_SR0CTL 0x33 + +#define RC5T583_REG_DC1CTL 0x34 +#define RC5T583_REG_DC1DAC 0x35 +#define RC5T583_REG_DC1LATCTL 0x36 +#define RC5T583_REG_SR1CTL 0x37 + +#define RC5T583_REG_DC2CTL 0x38 +#define RC5T583_REG_DC2DAC 0x39 +#define RC5T583_REG_DC2LATCTL 0x3A +#define RC5T583_REG_SR2CTL 0x3B + +#define RC5T583_REG_DC3CTL 0x3C +#define RC5T583_REG_DC3DAC 0x3D +#define RC5T583_REG_DC3LATCTL 0x3E +#define RC5T583_REG_SR3CTL 0x3F + + +#define RC5T583_REG_LDOEN1 0x50 +#define RC5T583_REG_LDOEN2 0x51 +#define RC5T583_REG_LDODIS1 0x52 +#define RC5T583_REG_LDODIS2 0x53 + +#define RC5T583_REG_LDO0DAC 0x54 +#define RC5T583_REG_LDO1DAC 0x55 +#define RC5T583_REG_LDO2DAC 0x56 +#define RC5T583_REG_LDO3DAC 0x57 +#define RC5T583_REG_LDO4DAC 0x58 +#define RC5T583_REG_LDO5DAC 0x59 +#define RC5T583_REG_LDO6DAC 0x5A +#define RC5T583_REG_LDO7DAC 0x5B +#define RC5T583_REG_LDO8DAC 0x5C +#define RC5T583_REG_LDO9DAC 0x5D + +#define RC5T583_REG_DC0DAC_DS 0x60 +#define RC5T583_REG_DC1DAC_DS 0x61 +#define RC5T583_REG_DC2DAC_DS 0x62 +#define RC5T583_REG_DC3DAC_DS 0x63 + +#define RC5T583_REG_LDO0DAC_DS 0x64 +#define RC5T583_REG_LDO1DAC_DS 0x65 +#define RC5T583_REG_LDO2DAC_DS 0x66 +#define RC5T583_REG_LDO3DAC_DS 0x67 +#define RC5T583_REG_LDO4DAC_DS 0x68 +#define RC5T583_REG_LDO5DAC_DS 0x69 +#define RC5T583_REG_LDO6DAC_DS 0x6A +#define RC5T583_REG_LDO7DAC_DS 0x6B +#define RC5T583_REG_LDO8DAC_DS 0x6C +#define RC5T583_REG_LDO9DAC_DS 0x6D + +/* GPIO register base address */ +#define RC5T583_GPIO_IOSEL 0xA0 +#define RC5T583_GPIO_PDEN 0xA1 +#define RC5T583_GPIO_IOOUT 0xA2 +#define RC5T583_GPIO_PGSEL 0xA3 +#define RC5T583_GPIO_GPINV 0xA4 +#define RC5T583_GPIO_GPDEB 0xA5 +#define RC5T583_GPIO_GPEDGE1 0xA6 +#define RC5T583_GPIO_GPEDGE2 0xA7 +#define RC5T583_GPIO_EN_INT 0xA8 +#define RC5T583_GPIO_MON_IOIN 0xAB +#define RC5T583_GPIO_GPOFUNC 0xAC + +/* RICOH_RC5T583 IRQ definitions */ +enum { + RC5T583_IRQ_ONKEY, + RC5T583_IRQ_ACOK, + RC5T583_IRQ_LIDOPEN, + RC5T583_IRQ_PREOT, + RC5T583_IRQ_CLKSTP, + RC5T583_IRQ_ONKEY_OFF, + RC5T583_IRQ_WD, + RC5T583_IRQ_EN_PWRREQ1, + RC5T583_IRQ_EN_PWRREQ2, + RC5T583_IRQ_PRE_VINDET, + + RC5T583_IRQ_DC0LIM, + RC5T583_IRQ_DC1LIM, + RC5T583_IRQ_DC2LIM, + RC5T583_IRQ_DC3LIM, + + RC5T583_IRQ_CTC, + RC5T583_IRQ_YALE, + RC5T583_IRQ_DALE, + RC5T583_IRQ_WALE, + + RC5T583_IRQ_AIN1L, + RC5T583_IRQ_AIN2L, + RC5T583_IRQ_AIN3L, + RC5T583_IRQ_VBATL, + RC5T583_IRQ_VIN3L, + RC5T583_IRQ_VIN8L, + RC5T583_IRQ_AIN1H, + RC5T583_IRQ_AIN2H, + RC5T583_IRQ_AIN3H, + RC5T583_IRQ_VBATH, + RC5T583_IRQ_VIN3H, + RC5T583_IRQ_VIN8H, + RC5T583_IRQ_ADCEND, + + RC5T583_IRQ_GPIO0, + RC5T583_IRQ_GPIO1, + RC5T583_IRQ_GPIO2, + RC5T583_IRQ_GPIO3, + RC5T583_IRQ_GPIO4, + RC5T583_IRQ_GPIO5, + RC5T583_IRQ_GPIO6, + RC5T583_IRQ_GPIO7, + + /* Should be last entry */ + RC5T583_MAX_IRQS, +}; + +/* Ricoh583 gpio definitions */ +enum { + RC5T583_GPIO0, + RC5T583_GPIO1, + RC5T583_GPIO2, + RC5T583_GPIO3, + RC5T583_GPIO4, + RC5T583_GPIO5, + RC5T583_GPIO6, + RC5T583_GPIO7, + + /* Should be last entry */ + RC5T583_MAX_GPIO, +}; + +enum { + RC5T583_DS_NONE, + RC5T583_DS_DC0, + RC5T583_DS_DC1, + RC5T583_DS_DC2, + RC5T583_DS_DC3, + RC5T583_DS_LDO0, + RC5T583_DS_LDO1, + RC5T583_DS_LDO2, + RC5T583_DS_LDO3, + RC5T583_DS_LDO4, + RC5T583_DS_LDO5, + RC5T583_DS_LDO6, + RC5T583_DS_LDO7, + RC5T583_DS_LDO8, + RC5T583_DS_LDO9, + RC5T583_DS_PSO0, + RC5T583_DS_PSO1, + RC5T583_DS_PSO2, + RC5T583_DS_PSO3, + RC5T583_DS_PSO4, + RC5T583_DS_PSO5, + RC5T583_DS_PSO6, + RC5T583_DS_PSO7, + + /* Should be last entry */ + RC5T583_DS_MAX, +}; + +/* + * Ricoh pmic RC5T583 supports sleep through two external controls. + * The output of gpios and regulator can be enable/disable through + * this external signals. + */ +enum { + RC5T583_EXT_PWRREQ1_CONTROL = 0x1, + RC5T583_EXT_PWRREQ2_CONTROL = 0x2, +}; + +struct rc5t583 { + struct device *dev; + struct regmap *regmap; + int chip_irq; + int irq_base; + struct mutex irq_lock; + unsigned long group_irq_en[MAX_MAIN_INTERRUPT]; + + /* For main interrupt bits in INTC */ + uint8_t intc_inten_reg; + + /* For group interrupt bits and address */ + uint8_t irq_en_reg[RC5T583_MAX_INTERRUPT_MASK_REGS]; + + /* For gpio edge */ + uint8_t gpedge_reg[RC5T583_MAX_GPEDGE_REG]; +}; + +/* + * rc5t583_platform_data: Platform data for ricoh rc5t583 pmu. + * The board specific data is provided through this structure. + * @irq_base: Irq base number on which this device registers their interrupts. + * @enable_shutdown: Enable shutdown through the input pin "shutdown". + */ + +struct rc5t583_platform_data { + int irq_base; + bool enable_shutdown; +}; + +int rc5t583_write(struct device *dev, u8 reg, uint8_t val); +int rc5t583_read(struct device *dev, uint8_t reg, uint8_t *val); +int rc5t583_set_bits(struct device *dev, unsigned int reg, + unsigned int bit_mask); +int rc5t583_clear_bits(struct device *dev, unsigned int reg, + unsigned int bit_mask); +int rc5t583_update(struct device *dev, unsigned int reg, + unsigned int val, unsigned int mask); +int rc5t583_ext_power_req_config(struct device *dev, int deepsleep_id, + int ext_pwr_req, int deepsleep_slot_nr); +int rc5t583_irq_init(struct rc5t583 *rc5t583, int irq, int irq_base); +int rc5t583_irq_exit(struct rc5t583 *rc5t583); + +#endif -- 2.34.1