From 093cf723b2b06d774929ea07982f6a466ff22314 Mon Sep 17 00:00:00 2001 From: Steven Cole Date: Tue, 3 May 2005 19:07:24 -0600 Subject: [PATCH] [PATCH] USB: Spelling fixes for drivers/usb. Here are some spelling corrections for drivers/usb. cancelation -> cancellation succesful -> successful cancelation -> cancellation decriptor -> descriptor Initalize -> Initialize wierd -> weird Protocoll -> Protocol occured -> occurred successfull -> successful Procesing -> Processing devide -> divide Isochronuous -> Isochronous noticable -> noticeable Basicly -> Basically transfering -> transferring intialize -> initialize Incomming -> Incoming additionnal -> additional asume -> assume Unfortunatly -> Unfortunately retreive -> retrieve tranceiver -> transceiver Compatiblity -> Compatibility Incorprated -> Incorporated existance -> existence Ununsual -> Unusual Signed-off-by: Steven Cole Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/message.c | 4 ++-- drivers/usb/core/urb.c | 6 +++--- drivers/usb/gadget/ether.c | 2 +- drivers/usb/gadget/inode.c | 2 +- drivers/usb/gadget/lh7a40x_udc.c | 2 +- drivers/usb/gadget/serial.c | 2 +- drivers/usb/host/hc_crisv10.c | 2 +- drivers/usb/host/sl811-hcd.c | 4 ++-- drivers/usb/image/mdc800.c | 2 +- drivers/usb/input/aiptek.c | 2 +- drivers/usb/input/mtouchusb.c | 2 +- drivers/usb/media/ov511.c | 2 +- drivers/usb/media/pwc/pwc-ctrl.c | 2 +- drivers/usb/media/pwc/pwc-if.c | 6 +++--- drivers/usb/media/pwc/pwc-ioctl.h | 2 +- drivers/usb/misc/legousbtower.c | 2 +- drivers/usb/net/zd1201.c | 8 ++++---- drivers/usb/serial/cypress_m8.c | 2 +- drivers/usb/serial/ftdi_sio.c | 4 ++-- drivers/usb/serial/ftdi_sio.h | 2 +- drivers/usb/serial/io_usbvend.h | 2 +- drivers/usb/serial/keyspan_usa90msg.h | 2 +- drivers/usb/storage/shuttle_usbat.c | 2 +- drivers/usb/storage/unusual_devs.h | 2 +- 24 files changed, 34 insertions(+), 34 deletions(-) diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index e12c5be1e0a3..f50aaf25c98e 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -431,7 +431,7 @@ nomem: * (2) error, where io->status is a negative errno value. The number * of io->bytes transferred before the error is usually less * than requested, and can be nonzero. - * (3) cancelation, a type of error with status -ECONNRESET that + * (3) cancellation, a type of error with status -ECONNRESET that * is initiated by usb_sg_cancel(). * * When this function returns, all memory allocated through usb_sg_init() or @@ -1282,7 +1282,7 @@ static void release_interface(struct device *dev) * bus rwsem; usb device driver probe() methods cannot use this routine. * * Returns zero on success, or else the status code returned by the - * underlying call that failed. On succesful completion, each interface + * underlying call that failed. On successful completion, each interface * in the original device configuration has been destroyed, and each one * in the new configuration has been probed by all relevant usb device * drivers currently known to the kernel. diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index 16972159a57a..0faf18d511de 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -121,7 +121,7 @@ struct urb * usb_get_urb(struct urb *urb) * describing that request to the USB subsystem. Request completion will * be indicated later, asynchronously, by calling the completion handler. * The three types of completion are success, error, and unlink - * (a software-induced fault, also called "request cancelation"). + * (a software-induced fault, also called "request cancellation"). * * URBs may be submitted in interrupt context. * @@ -170,7 +170,7 @@ struct urb * usb_get_urb(struct urb *urb) * As of Linux 2.6, all USB endpoint transfer queues support depths greater * than one. This was previously a HCD-specific behavior, except for ISO * transfers. Non-isochronous endpoint queues are inactive during cleanup - * after faults (transfer errors or cancelation). + * after faults (transfer errors or cancellation). * * Reserved Bandwidth Transfers: * @@ -395,7 +395,7 @@ int usb_submit_urb(struct urb *urb, int mem_flags) * * This routine cancels an in-progress request. URBs complete only * once per submission, and may be canceled only once per submission. - * Successful cancelation means the requests's completion handler will + * Successful cancellation means the requests's completion handler will * be called with a status code indicating that the request has been * canceled (rather than any other code) and will quickly be removed * from host controller data structures. diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index 3993156c2e82..3f783cbdc7c3 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -569,7 +569,7 @@ static const struct usb_cdc_ether_desc ether_desc = { /* include the status endpoint if we can, even where it's optional. * use wMaxPacketSize big enough to fit CDC_NOTIFY_SPEED_CHANGE in one - * packet, to simplify cancelation; and a big transfer interval, to + * packet, to simplify cancellation; and a big transfer interval, to * waste less bandwidth. * * some drivers (like Linux 2.4 cdc-ether!) "need" it to exist even diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c index 2cff67ccce45..1e5e6ddef787 100644 --- a/drivers/usb/gadget/inode.c +++ b/drivers/usb/gadget/inode.c @@ -275,7 +275,7 @@ static const char *CHIP; * * After opening, configure non-control endpoints. Then use normal * stream read() and write() requests; and maybe ioctl() to get more - * precise FIFO status when recovering from cancelation. + * precise FIFO status when recovering from cancellation. */ static void epio_complete (struct usb_ep *ep, struct usb_request *req) diff --git a/drivers/usb/gadget/lh7a40x_udc.c b/drivers/usb/gadget/lh7a40x_udc.c index 0def9f70e889..df75ab65a5ec 100644 --- a/drivers/usb/gadget/lh7a40x_udc.c +++ b/drivers/usb/gadget/lh7a40x_udc.c @@ -705,7 +705,7 @@ void nuke(struct lh7a40x_ep *ep, int status) done(ep, req, status); } - /* Disable IRQ if EP is enabled (has decriptor) */ + /* Disable IRQ if EP is enabled (has descriptor) */ if (ep->desc) pio_irq_disable(ep_index(ep)); } diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c index f1762ed6db63..4d591c764e38 100644 --- a/drivers/usb/gadget/serial.c +++ b/drivers/usb/gadget/serial.c @@ -240,7 +240,7 @@ struct gs_dev { struct usb_ep *dev_notify_ep; /* address of notify endpoint */ struct usb_ep *dev_in_ep; /* address of in endpoint */ struct usb_ep *dev_out_ep; /* address of out endpoint */ - struct usb_endpoint_descriptor /* desciptor of notify ep */ + struct usb_endpoint_descriptor /* descriptor of notify ep */ *dev_notify_ep_desc; struct usb_endpoint_descriptor /* descriptor of in endpoint */ *dev_in_ep_desc; diff --git a/drivers/usb/host/hc_crisv10.c b/drivers/usb/host/hc_crisv10.c index 376f8a034f65..d9883d774d3a 100644 --- a/drivers/usb/host/hc_crisv10.c +++ b/drivers/usb/host/hc_crisv10.c @@ -4329,7 +4329,7 @@ static int __init etrax_usb_hc_init(void) bus->bus_name="ETRAX 100LX"; bus->hcpriv = hc; - /* Initalize RH to the default address. + /* Initialize RH to the default address. And make sure that we have no status change indication */ hc->rh.numports = 2; /* The RH has two ports */ hc->rh.devnum = 1; diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index d309e292198e..a374b7692073 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -134,7 +134,7 @@ static void port_power(struct sl811 *sl811, int is_on) /* This is a PIO-only HCD. Queueing appends URBs to the endpoint's queue, * and may start I/O. Endpoint queues are scanned during completion irq - * handlers (one per packet: ACK, NAK, faults, etc) and urb cancelation. + * handlers (one per packet: ACK, NAK, faults, etc) and urb cancellation. * * Using an external DMA engine to copy a packet at a time could work, * though setup/teardown costs may be too big to make it worthwhile. @@ -738,7 +738,7 @@ retry: } #endif - /* port status seems wierd until after reset, so + /* port status seems weird until after reset, so * force the reset and make khubd clean up later. */ sl811->port1 |= (1 << USB_PORT_FEAT_C_CONNECTION) diff --git a/drivers/usb/image/mdc800.c b/drivers/usb/image/mdc800.c index 5791723e6083..a330a4b50e16 100644 --- a/drivers/usb/image/mdc800.c +++ b/drivers/usb/image/mdc800.c @@ -23,7 +23,7 @@ * * * The driver brings the USB functions of the MDC800 to Linux. - * To use the Camera you must support the USB Protocoll of the camera + * To use the Camera you must support the USB Protocol of the camera * to the Kernel Node. * The Driver uses a misc device Node. Create it with : * mknod /dev/mustek c 180 32 diff --git a/drivers/usb/input/aiptek.c b/drivers/usb/input/aiptek.c index 2d76be62f4e0..94ce2a9ad50f 100644 --- a/drivers/usb/input/aiptek.c +++ b/drivers/usb/input/aiptek.c @@ -386,7 +386,7 @@ static int aiptek_convert_from_2s_complement(unsigned char c) * convention above.) I therefore have taken over REL_MISC and ABS_MISC * (for relative and absolute reports, respectively) for communicating * Proximity. Why two events? I thought it interesting to know if the - * Proximity event occured while the tablet was in absolute or relative + * Proximity event occurred while the tablet was in absolute or relative * mode. * * Other tablets use the notion of a certain minimum stylus pressure diff --git a/drivers/usb/input/mtouchusb.c b/drivers/usb/input/mtouchusb.c index 6b45a66d58c1..ab1a2a30ce7c 100644 --- a/drivers/usb/input/mtouchusb.c +++ b/drivers/usb/input/mtouchusb.c @@ -32,7 +32,7 @@ * Changed reset from standard USB dev reset to vendor reset * Changed data sent to host from compensated to raw coordinates * Eliminated vendor/product module params - * Performed multiple successfull tests with an EXII-5010UC + * Performed multiple successful tests with an EXII-5010UC * * 1.5 02/27/2005 ddstreet@ieee.org * Added module parameter to select raw or hw-calibrated coordinate reporting diff --git a/drivers/usb/media/ov511.c b/drivers/usb/media/ov511.c index d6051822416e..036c485d1d1e 100644 --- a/drivers/usb/media/ov511.c +++ b/drivers/usb/media/ov511.c @@ -5041,7 +5041,7 @@ ov6xx0_configure(struct usb_ov511 *ov) { OV511_I2C_BUS, 0x2a, 0x04 }, /* Disable framerate adjust */ // { OV511_I2C_BUS, 0x2b, 0xac }, /* Framerate; Set 2a[7] first */ { OV511_I2C_BUS, 0x2d, 0x99 }, - { OV511_I2C_BUS, 0x33, 0xa0 }, /* Color Procesing Parameter */ + { OV511_I2C_BUS, 0x33, 0xa0 }, /* Color Processing Parameter */ { OV511_I2C_BUS, 0x34, 0xd2 }, /* Max A/D range */ { OV511_I2C_BUS, 0x38, 0x8b }, { OV511_I2C_BUS, 0x39, 0x40 }, diff --git a/drivers/usb/media/pwc/pwc-ctrl.c b/drivers/usb/media/pwc/pwc-ctrl.c index 42352f531bc0..42ec468d52d6 100644 --- a/drivers/usb/media/pwc/pwc-ctrl.c +++ b/drivers/usb/media/pwc/pwc-ctrl.c @@ -1100,7 +1100,7 @@ static inline int pwc_mpt_set_angle(struct pwc_device *pdev, int pan, int tilt) unsigned char buf[4]; /* set new relative angle; angles are expressed in degrees * 100, - but cam as .5 degree resolution, hence devide by 200. Also + but cam as .5 degree resolution, hence divide by 200. Also the angle must be multiplied by 64 before it's send to the cam (??) */ diff --git a/drivers/usb/media/pwc/pwc-if.c b/drivers/usb/media/pwc/pwc-if.c index c53e2263b7fb..cca47f480a8b 100644 --- a/drivers/usb/media/pwc/pwc-if.c +++ b/drivers/usb/media/pwc/pwc-if.c @@ -272,7 +272,7 @@ static int pwc_allocate_buffers(struct pwc_device *pdev) return -ENXIO; } #endif - /* Allocate Isochronuous pipe buffers */ + /* Allocate Isochronous pipe buffers */ for (i = 0; i < MAX_ISO_BUFS; i++) { if (pdev->sbuf[i].data == NULL) { kbuf = kmalloc(ISO_BUFFER_SIZE, GFP_KERNEL); @@ -850,7 +850,7 @@ static int pwc_isoc_init(struct pwc_device *pdev) if (pdev->vmax_packet_size < 0 || pdev->vmax_packet_size > ISO_MAX_FRAME_SIZE) { Err("Failed to find packet size for video endpoint in current alternate setting.\n"); - return -ENFILE; /* Odd error, that should be noticable */ + return -ENFILE; /* Odd error, that should be noticeable */ } /* Set alternate interface */ @@ -2128,7 +2128,7 @@ static int __init usb_pwc_init(void) if (leds[1] >= 0) led_off = leds[1]; - /* Big device node whoopla. Basicly, it allows you to assign a + /* Big device node whoopla. Basically, it allows you to assign a device node (/dev/videoX) to a camera, based on its type & serial number. The format is [type[.serialnumber]:]node. diff --git a/drivers/usb/media/pwc/pwc-ioctl.h b/drivers/usb/media/pwc/pwc-ioctl.h index 65805eaa9a1c..5f9cb08bc02e 100644 --- a/drivers/usb/media/pwc/pwc-ioctl.h +++ b/drivers/usb/media/pwc/pwc-ioctl.h @@ -75,7 +75,7 @@ #define PWC_FPS_SNAPSHOT 0x00400000 -/* structure for transfering x & y coordinates */ +/* structure for transferring x & y coordinates */ struct pwc_coord { int x, y; /* guess what */ diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c index dd4580cb57e0..7d06105763d4 100644 --- a/drivers/usb/misc/legousbtower.c +++ b/drivers/usb/misc/legousbtower.c @@ -859,7 +859,7 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device info ("udev is NULL."); } - /* allocate memory for our device state and intialize it */ + /* allocate memory for our device state and initialize it */ dev = kmalloc (sizeof(struct lego_usb_tower), GFP_KERNEL); diff --git a/drivers/usb/net/zd1201.c b/drivers/usb/net/zd1201.c index f98cb2af024e..341ae5f732dd 100644 --- a/drivers/usb/net/zd1201.c +++ b/drivers/usb/net/zd1201.c @@ -183,7 +183,7 @@ static void zd1201_usbtx(struct urb *urb, struct pt_regs *regs) return; } -/* Incomming data */ +/* Incoming data */ static void zd1201_usbrx(struct urb *urb, struct pt_regs *regs) { struct zd1201 *zd = urb->context; @@ -772,7 +772,7 @@ static int zd1201_net_stop(struct net_device *dev) /* RFC 1042 encapsulates Ethernet frames in 802.11 frames by prefixing them with 0xaa, 0xaa, 0x03) followed by a SNAP OID of 0 - (0x00, 0x00, 0x00). Zd requires an additionnal padding, copy + (0x00, 0x00, 0x00). Zd requires an additional padding, copy of ethernet addresses, length of the standard RFC 1042 packet and a command byte (which is nul for tx). @@ -1098,7 +1098,7 @@ static int zd1201_get_range(struct net_device *dev, /* Little bit of magic here: we only get the quality if we poll * for it, and we never get an actual request to trigger such - * a poll. Therefore we 'asume' that the user will soon ask for + * a poll. Therefore we 'assume' that the user will soon ask for * the stats after asking the bssid. */ static int zd1201_get_wap(struct net_device *dev, @@ -1108,7 +1108,7 @@ static int zd1201_get_wap(struct net_device *dev, unsigned char buffer[6]; if (!zd1201_getconfig(zd, ZD1201_RID_COMMSQUALITY, buffer, 6)) { - /* Unfortunatly the quality and noise reported is useless. + /* Unfortunately the quality and noise reported is useless. they seem to be accumulators that increase until you read them, unless we poll on a fixed interval we can't use them diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index d165f42d560d..9db23decc5bd 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -234,7 +234,7 @@ static struct usb_serial_device_type cypress_hidcom_device = { *****************************************************************************/ -/* This function can either set or retreive the current serial line settings */ +/* This function can either set or retrieve the current serial line settings */ static int cypress_serial_control (struct usb_serial_port *port, unsigned baud_mask, int data_bits, int stop_bits, int parity_enable, int parity_type, int reset, int cypress_request_type) { diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 0c4b43533268..52394f08a947 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -76,7 +76,7 @@ * Defererence pointers after any paranoid checks, not before. * * (21/Jun/2003) Erik Nygren - * Added support for Home Electronics Tira-1 IR tranceiver using FT232BM chip. + * Added support for Home Electronics Tira-1 IR transceiver using FT232BM chip. * See . Only operates properly * at 100000 and RTS-CTS, so set custom divisor mode on startup. * Also force the Tira-1 and USB-UIRT to only use their custom baud rates. @@ -91,7 +91,7 @@ * Minor whitespace and comment changes. * * (12/Jun/2003) David Norwood - * Added support for USB-UIRT IR tranceiver using 8U232AM chip. + * Added support for USB-UIRT IR transceiver using 8U232AM chip. * See . Only * operates properly at 312500, so set custom divisor mode on startup. * diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 96be36441149..a52bb13a9ce4 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -136,7 +136,7 @@ /* * Home Electronics (www.home-electro.com) USB gadgets */ -#define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR tranceiver */ +#define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR transceiver */ /* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */ /* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */ diff --git a/drivers/usb/serial/io_usbvend.h b/drivers/usb/serial/io_usbvend.h index 8c1fa5e722b1..f1804fd5a3dd 100644 --- a/drivers/usb/serial/io_usbvend.h +++ b/drivers/usb/serial/io_usbvend.h @@ -289,7 +289,7 @@ // // -// Edgeport Compatiblity Descriptor +// Edgeport Compatibility Descriptor // // This descriptor is only returned by Edgeport-compatible devices // supporting the EPiC spec. True ION devices do not return this diff --git a/drivers/usb/serial/keyspan_usa90msg.h b/drivers/usb/serial/keyspan_usa90msg.h index dd935b62c1a8..86708ecd8735 100644 --- a/drivers/usb/serial/keyspan_usa90msg.h +++ b/drivers/usb/serial/keyspan_usa90msg.h @@ -19,7 +19,7 @@ This file is available under a BSD-style copyright - 2. The name of InnoSys Incorprated may not be used to endorse or promote + 2. The name of InnoSys Incorporated may not be used to endorse or promote products derived from this software without specific prior written permission. diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c index 7eff03d9b041..f3b60288696c 100644 --- a/drivers/usb/storage/shuttle_usbat.c +++ b/drivers/usb/storage/shuttle_usbat.c @@ -786,7 +786,7 @@ static int usbat_flash_check_media(struct us_data *us, if (rc != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; - // Check for media existance + // Check for media existence rc = usbat_flash_check_media_present(uio); if (rc == USBAT_FLASH_MEDIA_NONE) { info->sense_key = 0x02; diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 99e8249ca13f..d2891f475793 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1,5 +1,5 @@ /* Driver for USB Mass Storage compliant devices - * Ununsual Devices File + * Unusual Devices File * * $Id: unusual_devs.h,v 1.32 2002/02/25 02:41:24 mdharm Exp $ * -- 2.34.1