From bc23328cc108d8805f1d234b86e5a6b76d4a80d5 Mon Sep 17 00:00:00 2001 From: Jan Kratochvil Date: Fri, 20 Mar 2015 17:15:15 +0100 Subject: [PATCH] Remove gdb.hp gdb/ChangeLog 2015-03-20 Jan Kratochvil * config/djgpp/README: Remove gdb.hp. gdb/testsuite/ChangeLog 2015-03-20 Jan Kratochvil * Makefile.in (ALL_SUBDIRS): Remove gdb.hp. * README: Remove HP-UX and gdb.hp. (configuration): * configure: Regenerate. * configure.ac (AC_OUTPUT): Remove gdb.hp/Makefile, gdb.hp/gdb.objdbg/Makefile, gdb.hp/gdb.base-hp/Makefile, gdb.hp/gdb.aCC/Makefile, gdb.hp/gdb.compat/Makefile, gdb.hp/gdb.defects/Makefile. * gdb.hp/Makefile.in: File deleted. * gdb.hp/gdb.aCC/Makefile.in: File deleted. * gdb.hp/gdb.aCC/optimize.c: File deleted. * gdb.hp/gdb.aCC/optimize.exp: File deleted. * gdb.hp/gdb.aCC/run.c: File deleted. * gdb.hp/gdb.aCC/watch-cmd.exp: File deleted. * gdb.hp/gdb.base-hp/Makefile.in: File deleted. * gdb.hp/gdb.base-hp/callfwmall.c: File deleted. * gdb.hp/gdb.base-hp/callfwmall.exp: File deleted. * gdb.hp/gdb.base-hp/dollar.c: File deleted. * gdb.hp/gdb.base-hp/dollar.exp: File deleted. * gdb.hp/gdb.base-hp/genso-thresh.c: File deleted. * gdb.hp/gdb.base-hp/hwwatchbus.c: File deleted. * gdb.hp/gdb.base-hp/hwwatchbus.exp: File deleted. * gdb.hp/gdb.base-hp/pxdb.c: File deleted. * gdb.hp/gdb.base-hp/pxdb.exp: File deleted. * gdb.hp/gdb.base-hp/reg-pa64.exp: File deleted. * gdb.hp/gdb.base-hp/reg-pa64.s: File deleted. * gdb.hp/gdb.base-hp/reg.exp: File deleted. * gdb.hp/gdb.base-hp/reg.s: File deleted. * gdb.hp/gdb.base-hp/sized-enum.c: File deleted. * gdb.hp/gdb.base-hp/sized-enum.exp: File deleted. * gdb.hp/gdb.base-hp/so-thresh.exp: File deleted. * gdb.hp/gdb.base-hp/so-thresh.mk: File deleted. * gdb.hp/gdb.base-hp/so-thresh.sh: File deleted. * gdb.hp/gdb.compat/Makefile.in: File deleted. * gdb.hp/gdb.compat/average.c: File deleted. * gdb.hp/gdb.compat/sum.c: File deleted. * gdb.hp/gdb.compat/xdb.c: File deleted. * gdb.hp/gdb.compat/xdb0.c: File deleted. * gdb.hp/gdb.compat/xdb0.h: File deleted. * gdb.hp/gdb.compat/xdb1.c: File deleted. * gdb.hp/gdb.compat/xdb1.exp: File deleted. * gdb.hp/gdb.compat/xdb2.exp: File deleted. * gdb.hp/gdb.compat/xdb3.exp: File deleted. * gdb.hp/gdb.defects/Makefile.in: File deleted. * gdb.hp/gdb.defects/bs14602.c: File deleted. * gdb.hp/gdb.defects/bs14602.exp: File deleted. * gdb.hp/gdb.defects/solib-d.c: File deleted. * gdb.hp/gdb.defects/solib-d.exp: File deleted. * gdb.hp/gdb.defects/solib-d1.c: File deleted. * gdb.hp/gdb.defects/solib-d2.c: File deleted. * gdb.hp/gdb.objdbg/Makefile.in: File deleted. * gdb.hp/gdb.objdbg/objdbg01.exp: File deleted. * gdb.hp/gdb.objdbg/objdbg01/x1.cc: File deleted. * gdb.hp/gdb.objdbg/objdbg01/x2.cc: File deleted. * gdb.hp/gdb.objdbg/objdbg01/x3.cc: File deleted. * gdb.hp/gdb.objdbg/objdbg01/x3.h: File deleted. * gdb.hp/gdb.objdbg/objdbg02.exp: File deleted. * gdb.hp/gdb.objdbg/objdbg02/x1.cc: File deleted. * gdb.hp/gdb.objdbg/objdbg02/x2.cc: File deleted. * gdb.hp/gdb.objdbg/objdbg02/x3.cc: File deleted. * gdb.hp/gdb.objdbg/objdbg03.exp: File deleted. * gdb.hp/gdb.objdbg/objdbg03/x1.cc: File deleted. * gdb.hp/gdb.objdbg/objdbg03/x2.cc: File deleted. * gdb.hp/gdb.objdbg/objdbg03/x3.cc: File deleted. * gdb.hp/gdb.objdbg/objdbg04.exp: File deleted. * gdb.hp/gdb.objdbg/objdbg04/x.h: File deleted. * gdb.hp/gdb.objdbg/objdbg04/x1.cc: File deleted. * gdb.hp/gdb.objdbg/objdbg04/x2.cc: File deleted. * gdb.hp/gdb.objdbg/tools/symaddr: File deleted. * gdb.hp/gdb.objdbg/tools/symaddr.pa64: File deleted. * gdb.hp/gdb.objdbg/tools/test-objdbg.cc: File deleted. * gdb.hp/tools/odump: File deleted. --- gdb/ChangeLog | 4 + gdb/config/djgpp/README | 4 +- gdb/testsuite/ChangeLog | 75 ++++ gdb/testsuite/Makefile.in | 2 +- gdb/testsuite/README | 3 +- gdb/testsuite/configure | 8 +- gdb/testsuite/configure.ac | 4 +- gdb/testsuite/gdb.hp/Makefile.in | 42 -- gdb/testsuite/gdb.hp/gdb.aCC/Makefile.in | 25 -- gdb/testsuite/gdb.hp/gdb.aCC/optimize.c | 76 ---- gdb/testsuite/gdb.hp/gdb.aCC/optimize.exp | 143 ------- gdb/testsuite/gdb.hp/gdb.aCC/run.c | 37 -- gdb/testsuite/gdb.hp/gdb.aCC/watch-cmd.exp | 148 -------- gdb/testsuite/gdb.hp/gdb.base-hp/Makefile.in | 30 -- gdb/testsuite/gdb.hp/gdb.base-hp/callfwmall.c | 358 ------------------ .../gdb.hp/gdb.base-hp/callfwmall.exp | 334 ---------------- gdb/testsuite/gdb.hp/gdb.base-hp/dollar.c | 10 - gdb/testsuite/gdb.hp/gdb.base-hp/dollar.exp | 146 ------- .../gdb.hp/gdb.base-hp/genso-thresh.c | 229 ----------- gdb/testsuite/gdb.hp/gdb.base-hp/hwwatchbus.c | 9 - .../gdb.hp/gdb.base-hp/hwwatchbus.exp | 74 ---- gdb/testsuite/gdb.hp/gdb.base-hp/pxdb.c | 37 -- gdb/testsuite/gdb.hp/gdb.base-hp/pxdb.exp | 119 ------ gdb/testsuite/gdb.hp/gdb.base-hp/reg-pa64.exp | 182 --------- gdb/testsuite/gdb.hp/gdb.base-hp/reg-pa64.s | 104 ----- gdb/testsuite/gdb.hp/gdb.base-hp/reg.exp | 230 ----------- gdb/testsuite/gdb.hp/gdb.base-hp/reg.s | 96 ----- gdb/testsuite/gdb.hp/gdb.base-hp/sized-enum.c | 43 --- .../gdb.hp/gdb.base-hp/sized-enum.exp | 156 -------- .../gdb.hp/gdb.base-hp/so-thresh.exp | 331 ---------------- gdb/testsuite/gdb.hp/gdb.base-hp/so-thresh.mk | 74 ---- gdb/testsuite/gdb.hp/gdb.base-hp/so-thresh.sh | 34 -- gdb/testsuite/gdb.hp/gdb.compat/Makefile.in | 25 -- gdb/testsuite/gdb.hp/gdb.compat/average.c | 46 --- gdb/testsuite/gdb.hp/gdb.compat/sum.c | 15 - gdb/testsuite/gdb.hp/gdb.compat/xdb.c | 20 - gdb/testsuite/gdb.hp/gdb.compat/xdb0.c | 39 -- gdb/testsuite/gdb.hp/gdb.compat/xdb0.h | 36 -- gdb/testsuite/gdb.hp/gdb.compat/xdb1.c | 33 -- gdb/testsuite/gdb.hp/gdb.compat/xdb1.exp | 67 ---- gdb/testsuite/gdb.hp/gdb.compat/xdb2.exp | 95 ----- gdb/testsuite/gdb.hp/gdb.compat/xdb3.exp | 316 ---------------- gdb/testsuite/gdb.hp/gdb.defects/Makefile.in | 25 -- gdb/testsuite/gdb.hp/gdb.defects/bs14602.c | 9 - gdb/testsuite/gdb.hp/gdb.defects/bs14602.exp | 111 ------ gdb/testsuite/gdb.hp/gdb.defects/solib-d.c | 6 - gdb/testsuite/gdb.hp/gdb.defects/solib-d.exp | 271 ------------- gdb/testsuite/gdb.hp/gdb.defects/solib-d1.c | 12 - gdb/testsuite/gdb.hp/gdb.defects/solib-d2.c | 11 - gdb/testsuite/gdb.hp/gdb.objdbg/Makefile.in | 26 -- gdb/testsuite/gdb.hp/gdb.objdbg/objdbg01.exp | 223 ----------- .../gdb.hp/gdb.objdbg/objdbg01/x1.cc | 25 -- .../gdb.hp/gdb.objdbg/objdbg01/x2.cc | 14 - .../gdb.hp/gdb.objdbg/objdbg01/x3.cc | 7 - gdb/testsuite/gdb.hp/gdb.objdbg/objdbg01/x3.h | 22 -- gdb/testsuite/gdb.hp/gdb.objdbg/objdbg02.exp | 86 ----- .../gdb.hp/gdb.objdbg/objdbg02/x1.cc | 16 - .../gdb.hp/gdb.objdbg/objdbg02/x2.cc | 17 - .../gdb.hp/gdb.objdbg/objdbg02/x3.cc | 6 - gdb/testsuite/gdb.hp/gdb.objdbg/objdbg03.exp | 165 -------- .../gdb.hp/gdb.objdbg/objdbg03/x1.cc | 15 - .../gdb.hp/gdb.objdbg/objdbg03/x2.cc | 7 - .../gdb.hp/gdb.objdbg/objdbg03/x3.cc | 21 - gdb/testsuite/gdb.hp/gdb.objdbg/objdbg04.exp | 66 ---- gdb/testsuite/gdb.hp/gdb.objdbg/objdbg04/x.h | 30 -- .../gdb.hp/gdb.objdbg/objdbg04/x1.cc | 15 - .../gdb.hp/gdb.objdbg/objdbg04/x2.cc | 3 - gdb/testsuite/gdb.hp/gdb.objdbg/tools/symaddr | 8 - .../gdb.hp/gdb.objdbg/tools/symaddr.pa64 | 8 - .../gdb.hp/gdb.objdbg/tools/test-objdbg.cc | 4 - gdb/testsuite/gdb.hp/tools/odump | 7 - 71 files changed, 85 insertions(+), 5010 deletions(-) delete mode 100644 gdb/testsuite/gdb.hp/Makefile.in delete mode 100644 gdb/testsuite/gdb.hp/gdb.aCC/Makefile.in delete mode 100644 gdb/testsuite/gdb.hp/gdb.aCC/optimize.c delete mode 100644 gdb/testsuite/gdb.hp/gdb.aCC/optimize.exp delete mode 100644 gdb/testsuite/gdb.hp/gdb.aCC/run.c delete mode 100644 gdb/testsuite/gdb.hp/gdb.aCC/watch-cmd.exp delete mode 100644 gdb/testsuite/gdb.hp/gdb.base-hp/Makefile.in delete mode 100644 gdb/testsuite/gdb.hp/gdb.base-hp/callfwmall.c delete mode 100644 gdb/testsuite/gdb.hp/gdb.base-hp/callfwmall.exp delete mode 100644 gdb/testsuite/gdb.hp/gdb.base-hp/dollar.c delete mode 100644 gdb/testsuite/gdb.hp/gdb.base-hp/dollar.exp delete mode 100644 gdb/testsuite/gdb.hp/gdb.base-hp/genso-thresh.c delete mode 100644 gdb/testsuite/gdb.hp/gdb.base-hp/hwwatchbus.c delete mode 100644 gdb/testsuite/gdb.hp/gdb.base-hp/hwwatchbus.exp delete mode 100644 gdb/testsuite/gdb.hp/gdb.base-hp/pxdb.c delete mode 100644 gdb/testsuite/gdb.hp/gdb.base-hp/pxdb.exp delete mode 100644 gdb/testsuite/gdb.hp/gdb.base-hp/reg-pa64.exp delete mode 100644 gdb/testsuite/gdb.hp/gdb.base-hp/reg-pa64.s delete mode 100644 gdb/testsuite/gdb.hp/gdb.base-hp/reg.exp delete mode 100644 gdb/testsuite/gdb.hp/gdb.base-hp/reg.s delete mode 100644 gdb/testsuite/gdb.hp/gdb.base-hp/sized-enum.c delete mode 100644 gdb/testsuite/gdb.hp/gdb.base-hp/sized-enum.exp delete mode 100644 gdb/testsuite/gdb.hp/gdb.base-hp/so-thresh.exp delete mode 100644 gdb/testsuite/gdb.hp/gdb.base-hp/so-thresh.mk delete mode 100755 gdb/testsuite/gdb.hp/gdb.base-hp/so-thresh.sh delete mode 100644 gdb/testsuite/gdb.hp/gdb.compat/Makefile.in delete mode 100644 gdb/testsuite/gdb.hp/gdb.compat/average.c delete mode 100644 gdb/testsuite/gdb.hp/gdb.compat/sum.c delete mode 100644 gdb/testsuite/gdb.hp/gdb.compat/xdb.c delete mode 100644 gdb/testsuite/gdb.hp/gdb.compat/xdb0.c delete mode 100644 gdb/testsuite/gdb.hp/gdb.compat/xdb0.h delete mode 100644 gdb/testsuite/gdb.hp/gdb.compat/xdb1.c delete mode 100644 gdb/testsuite/gdb.hp/gdb.compat/xdb1.exp delete mode 100644 gdb/testsuite/gdb.hp/gdb.compat/xdb2.exp delete mode 100644 gdb/testsuite/gdb.hp/gdb.compat/xdb3.exp delete mode 100644 gdb/testsuite/gdb.hp/gdb.defects/Makefile.in delete mode 100644 gdb/testsuite/gdb.hp/gdb.defects/bs14602.c delete mode 100644 gdb/testsuite/gdb.hp/gdb.defects/bs14602.exp delete mode 100644 gdb/testsuite/gdb.hp/gdb.defects/solib-d.c delete mode 100644 gdb/testsuite/gdb.hp/gdb.defects/solib-d.exp delete mode 100644 gdb/testsuite/gdb.hp/gdb.defects/solib-d1.c delete mode 100644 gdb/testsuite/gdb.hp/gdb.defects/solib-d2.c delete mode 100644 gdb/testsuite/gdb.hp/gdb.objdbg/Makefile.in delete mode 100644 gdb/testsuite/gdb.hp/gdb.objdbg/objdbg01.exp delete mode 100644 gdb/testsuite/gdb.hp/gdb.objdbg/objdbg01/x1.cc delete mode 100644 gdb/testsuite/gdb.hp/gdb.objdbg/objdbg01/x2.cc delete mode 100644 gdb/testsuite/gdb.hp/gdb.objdbg/objdbg01/x3.cc delete mode 100644 gdb/testsuite/gdb.hp/gdb.objdbg/objdbg01/x3.h delete mode 100644 gdb/testsuite/gdb.hp/gdb.objdbg/objdbg02.exp delete mode 100644 gdb/testsuite/gdb.hp/gdb.objdbg/objdbg02/x1.cc delete mode 100644 gdb/testsuite/gdb.hp/gdb.objdbg/objdbg02/x2.cc delete mode 100644 gdb/testsuite/gdb.hp/gdb.objdbg/objdbg02/x3.cc delete mode 100644 gdb/testsuite/gdb.hp/gdb.objdbg/objdbg03.exp delete mode 100644 gdb/testsuite/gdb.hp/gdb.objdbg/objdbg03/x1.cc delete mode 100644 gdb/testsuite/gdb.hp/gdb.objdbg/objdbg03/x2.cc delete mode 100644 gdb/testsuite/gdb.hp/gdb.objdbg/objdbg03/x3.cc delete mode 100644 gdb/testsuite/gdb.hp/gdb.objdbg/objdbg04.exp delete mode 100644 gdb/testsuite/gdb.hp/gdb.objdbg/objdbg04/x.h delete mode 100644 gdb/testsuite/gdb.hp/gdb.objdbg/objdbg04/x1.cc delete mode 100644 gdb/testsuite/gdb.hp/gdb.objdbg/objdbg04/x2.cc delete mode 100755 gdb/testsuite/gdb.hp/gdb.objdbg/tools/symaddr delete mode 100755 gdb/testsuite/gdb.hp/gdb.objdbg/tools/symaddr.pa64 delete mode 100644 gdb/testsuite/gdb.hp/gdb.objdbg/tools/test-objdbg.cc delete mode 100755 gdb/testsuite/gdb.hp/tools/odump diff --git a/gdb/ChangeLog b/gdb/ChangeLog index ad074c3676..7ad050c0bb 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,3 +1,7 @@ +2015-03-20 Jan Kratochvil + + * config/djgpp/README: Remove gdb.hp. + 2015-03-20 Yao Qi * aarch64-tdep.c (aarch64_gdbarch_init): Don't call diff --git a/gdb/config/djgpp/README b/gdb/config/djgpp/README index 94de3375d8..2ae6535039 100644 --- a/gdb/config/djgpp/README +++ b/gdb/config/djgpp/README @@ -181,8 +181,8 @@ the size of your environment), etc. Note that djcheck.sh only recurses into those of the subdirectories of the test suite which test features supported by the DJGPP port of GDB. -For example, the tests in the gdb.gdbtk, gdb.threads, and gdb.hp -directories are not run. +For example, the tests in the gdb.gdbtk, and gdb.threads directories +are not run. Enjoy, diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog index 6bf008a3df..43b4eb5c98 100644 --- a/gdb/testsuite/ChangeLog +++ b/gdb/testsuite/ChangeLog @@ -1,3 +1,78 @@ +2015-03-20 Jan Kratochvil + + * Makefile.in (ALL_SUBDIRS): Remove gdb.hp. + * README: Remove HP-UX and gdb.hp. + (configuration): + * configure: Regenerate. + * configure.ac (AC_OUTPUT): Remove gdb.hp/Makefile, + gdb.hp/gdb.objdbg/Makefile, gdb.hp/gdb.base-hp/Makefile, + gdb.hp/gdb.aCC/Makefile, gdb.hp/gdb.compat/Makefile, + gdb.hp/gdb.defects/Makefile. + * gdb.hp/Makefile.in: File deleted. + * gdb.hp/gdb.aCC/Makefile.in: File deleted. + * gdb.hp/gdb.aCC/optimize.c: File deleted. + * gdb.hp/gdb.aCC/optimize.exp: File deleted. + * gdb.hp/gdb.aCC/run.c: File deleted. + * gdb.hp/gdb.aCC/watch-cmd.exp: File deleted. + * gdb.hp/gdb.base-hp/Makefile.in: File deleted. + * gdb.hp/gdb.base-hp/callfwmall.c: File deleted. + * gdb.hp/gdb.base-hp/callfwmall.exp: File deleted. + * gdb.hp/gdb.base-hp/dollar.c: File deleted. + * gdb.hp/gdb.base-hp/dollar.exp: File deleted. + * gdb.hp/gdb.base-hp/genso-thresh.c: File deleted. + * gdb.hp/gdb.base-hp/hwwatchbus.c: File deleted. + * gdb.hp/gdb.base-hp/hwwatchbus.exp: File deleted. + * gdb.hp/gdb.base-hp/pxdb.c: File deleted. + * gdb.hp/gdb.base-hp/pxdb.exp: File deleted. + * gdb.hp/gdb.base-hp/reg-pa64.exp: File deleted. + * gdb.hp/gdb.base-hp/reg-pa64.s: File deleted. + * gdb.hp/gdb.base-hp/reg.exp: File deleted. + * gdb.hp/gdb.base-hp/reg.s: File deleted. + * gdb.hp/gdb.base-hp/sized-enum.c: File deleted. + * gdb.hp/gdb.base-hp/sized-enum.exp: File deleted. + * gdb.hp/gdb.base-hp/so-thresh.exp: File deleted. + * gdb.hp/gdb.base-hp/so-thresh.mk: File deleted. + * gdb.hp/gdb.base-hp/so-thresh.sh: File deleted. + * gdb.hp/gdb.compat/Makefile.in: File deleted. + * gdb.hp/gdb.compat/average.c: File deleted. + * gdb.hp/gdb.compat/sum.c: File deleted. + * gdb.hp/gdb.compat/xdb.c: File deleted. + * gdb.hp/gdb.compat/xdb0.c: File deleted. + * gdb.hp/gdb.compat/xdb0.h: File deleted. + * gdb.hp/gdb.compat/xdb1.c: File deleted. + * gdb.hp/gdb.compat/xdb1.exp: File deleted. + * gdb.hp/gdb.compat/xdb2.exp: File deleted. + * gdb.hp/gdb.compat/xdb3.exp: File deleted. + * gdb.hp/gdb.defects/Makefile.in: File deleted. + * gdb.hp/gdb.defects/bs14602.c: File deleted. + * gdb.hp/gdb.defects/bs14602.exp: File deleted. + * gdb.hp/gdb.defects/solib-d.c: File deleted. + * gdb.hp/gdb.defects/solib-d.exp: File deleted. + * gdb.hp/gdb.defects/solib-d1.c: File deleted. + * gdb.hp/gdb.defects/solib-d2.c: File deleted. + * gdb.hp/gdb.objdbg/Makefile.in: File deleted. + * gdb.hp/gdb.objdbg/objdbg01.exp: File deleted. + * gdb.hp/gdb.objdbg/objdbg01/x1.cc: File deleted. + * gdb.hp/gdb.objdbg/objdbg01/x2.cc: File deleted. + * gdb.hp/gdb.objdbg/objdbg01/x3.cc: File deleted. + * gdb.hp/gdb.objdbg/objdbg01/x3.h: File deleted. + * gdb.hp/gdb.objdbg/objdbg02.exp: File deleted. + * gdb.hp/gdb.objdbg/objdbg02/x1.cc: File deleted. + * gdb.hp/gdb.objdbg/objdbg02/x2.cc: File deleted. + * gdb.hp/gdb.objdbg/objdbg02/x3.cc: File deleted. + * gdb.hp/gdb.objdbg/objdbg03.exp: File deleted. + * gdb.hp/gdb.objdbg/objdbg03/x1.cc: File deleted. + * gdb.hp/gdb.objdbg/objdbg03/x2.cc: File deleted. + * gdb.hp/gdb.objdbg/objdbg03/x3.cc: File deleted. + * gdb.hp/gdb.objdbg/objdbg04.exp: File deleted. + * gdb.hp/gdb.objdbg/objdbg04/x.h: File deleted. + * gdb.hp/gdb.objdbg/objdbg04/x1.cc: File deleted. + * gdb.hp/gdb.objdbg/objdbg04/x2.cc: File deleted. + * gdb.hp/gdb.objdbg/tools/symaddr: File deleted. + * gdb.hp/gdb.objdbg/tools/symaddr.pa64: File deleted. + * gdb.hp/gdb.objdbg/tools/test-objdbg.cc: File deleted. + * gdb.hp/tools/odump: File deleted. + 2015-03-19 Pedro Alves * gdb.threads/continue-pending-status.exp (saw_thread_2) diff --git a/gdb/testsuite/Makefile.in b/gdb/testsuite/Makefile.in index 53cb7547d4..c064f06fc7 100644 --- a/gdb/testsuite/Makefile.in +++ b/gdb/testsuite/Makefile.in @@ -33,7 +33,7 @@ EXEEXT = @EXEEXT@ SUBDIRS = @subdirs@ RPATH_ENVVAR = @RPATH_ENVVAR@ ALL_SUBDIRS = gdb.ada gdb.arch gdb.asm gdb.base gdb.btrace gdb.cell gdb.cp \ - gdb.disasm gdb.dlang gdb.dwarf2 gdb.fortran gdb.gdb gdb.go gdb.hp \ + gdb.disasm gdb.dlang gdb.dwarf2 gdb.fortran gdb.gdb gdb.go \ gdb.java gdb.linespec gdb.mi gdb.modula2 gdb.multi \ gdb.objc gdb.opencl gdb.opt gdb.pascal gdb.python gdb.server \ gdb.stabs gdb.reverse gdb.threads gdb.trace gdb.xml \ diff --git a/gdb/testsuite/README b/gdb/testsuite/README index fa177815fb..70f65cdafe 100644 --- a/gdb/testsuite/README +++ b/gdb/testsuite/README @@ -411,8 +411,7 @@ gdb.cp for C++ and gdb.java for Java. gdb. Non-portable tests. The tests are specific to a specific -configuration (host or target), such as HP-UX or eCos. Example is -gdb.hp, for HP-UX. +configuration (host or target), such as eCos. gdb.arch diff --git a/gdb/testsuite/configure b/gdb/testsuite/configure index 859f3480e6..0853e48120 100755 --- a/gdb/testsuite/configure +++ b/gdb/testsuite/configure @@ -3514,7 +3514,7 @@ program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` ac_config_files="$ac_config_files lib/pdtrace" -ac_config_files="$ac_config_files Makefile gdb.ada/Makefile gdb.arch/Makefile gdb.asm/Makefile gdb.base/Makefile gdb.btrace/Makefile gdb.cell/Makefile gdb.compile/Makefile gdb.cp/Makefile gdb.disasm/Makefile gdb.dwarf2/Makefile gdb.dlang/Makefile gdb.fortran/Makefile gdb.gdb/Makefile gdb.go/Makefile gdb.server/Makefile gdb.java/Makefile gdb.hp/Makefile gdb.hp/gdb.objdbg/Makefile gdb.hp/gdb.base-hp/Makefile gdb.hp/gdb.aCC/Makefile gdb.hp/gdb.compat/Makefile gdb.hp/gdb.defects/Makefile gdb.guile/Makefile gdb.linespec/Makefile gdb.mi/Makefile gdb.modula2/Makefile gdb.multi/Makefile gdb.objc/Makefile gdb.opencl/Makefile gdb.opt/Makefile gdb.pascal/Makefile gdb.perf/Makefile gdb.python/Makefile gdb.reverse/Makefile gdb.stabs/Makefile gdb.threads/Makefile gdb.trace/Makefile gdb.xml/Makefile" +ac_config_files="$ac_config_files Makefile gdb.ada/Makefile gdb.arch/Makefile gdb.asm/Makefile gdb.base/Makefile gdb.btrace/Makefile gdb.cell/Makefile gdb.compile/Makefile gdb.cp/Makefile gdb.disasm/Makefile gdb.dwarf2/Makefile gdb.dlang/Makefile gdb.fortran/Makefile gdb.gdb/Makefile gdb.go/Makefile gdb.server/Makefile gdb.java/Makefile gdb.guile/Makefile gdb.linespec/Makefile gdb.mi/Makefile gdb.modula2/Makefile gdb.multi/Makefile gdb.objc/Makefile gdb.opencl/Makefile gdb.opt/Makefile gdb.pascal/Makefile gdb.perf/Makefile gdb.python/Makefile gdb.reverse/Makefile gdb.stabs/Makefile gdb.threads/Makefile gdb.trace/Makefile gdb.xml/Makefile" cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure @@ -4232,12 +4232,6 @@ do "gdb.go/Makefile") CONFIG_FILES="$CONFIG_FILES gdb.go/Makefile" ;; "gdb.server/Makefile") CONFIG_FILES="$CONFIG_FILES gdb.server/Makefile" ;; "gdb.java/Makefile") CONFIG_FILES="$CONFIG_FILES gdb.java/Makefile" ;; - "gdb.hp/Makefile") CONFIG_FILES="$CONFIG_FILES gdb.hp/Makefile" ;; - "gdb.hp/gdb.objdbg/Makefile") CONFIG_FILES="$CONFIG_FILES gdb.hp/gdb.objdbg/Makefile" ;; - "gdb.hp/gdb.base-hp/Makefile") CONFIG_FILES="$CONFIG_FILES gdb.hp/gdb.base-hp/Makefile" ;; - "gdb.hp/gdb.aCC/Makefile") CONFIG_FILES="$CONFIG_FILES gdb.hp/gdb.aCC/Makefile" ;; - "gdb.hp/gdb.compat/Makefile") CONFIG_FILES="$CONFIG_FILES gdb.hp/gdb.compat/Makefile" ;; - "gdb.hp/gdb.defects/Makefile") CONFIG_FILES="$CONFIG_FILES gdb.hp/gdb.defects/Makefile" ;; "gdb.guile/Makefile") CONFIG_FILES="$CONFIG_FILES gdb.guile/Makefile" ;; "gdb.linespec/Makefile") CONFIG_FILES="$CONFIG_FILES gdb.linespec/Makefile" ;; "gdb.mi/Makefile") CONFIG_FILES="$CONFIG_FILES gdb.mi/Makefile" ;; diff --git a/gdb/testsuite/configure.ac b/gdb/testsuite/configure.ac index 9de9fcc1ac..f7e9eea5f6 100644 --- a/gdb/testsuite/configure.ac +++ b/gdb/testsuite/configure.ac @@ -111,9 +111,7 @@ AC_OUTPUT([Makefile \ gdb.cell/Makefile gdb.compile/Makefile gdb.cp/Makefile gdb.disasm/Makefile \ gdb.dwarf2/Makefile gdb.dlang/Makefile gdb.fortran/Makefile gdb.gdb/Makefile \ gdb.go/Makefile gdb.server/Makefile gdb.java/Makefile \ - gdb.hp/Makefile gdb.hp/gdb.objdbg/Makefile gdb.hp/gdb.base-hp/Makefile \ - gdb.hp/gdb.aCC/Makefile gdb.hp/gdb.compat/Makefile \ - gdb.hp/gdb.defects/Makefile gdb.guile/Makefile gdb.linespec/Makefile \ + gdb.guile/Makefile gdb.linespec/Makefile \ gdb.mi/Makefile gdb.modula2/Makefile gdb.multi/Makefile \ gdb.objc/Makefile gdb.opencl/Makefile gdb.opt/Makefile gdb.pascal/Makefile \ gdb.perf/Makefile gdb.python/Makefile gdb.reverse/Makefile gdb.stabs/Makefile \ diff --git a/gdb/testsuite/gdb.hp/Makefile.in b/gdb/testsuite/gdb.hp/Makefile.in deleted file mode 100644 index 442dc441ae..0000000000 --- a/gdb/testsuite/gdb.hp/Makefile.in +++ /dev/null @@ -1,42 +0,0 @@ -VPATH = @srcdir@ -srcdir = @srcdir@ - -SUBDIRS = gdb.aCC gdb.base-hp gdb.compat gdb.defects gdb.objdbg - -all: - @echo "Nothing to be done for all..." - -info: -install-info: -dvi: -install: -uninstall: force -installcheck: -check: - -clean mostlyclean: - -rm -f *~ core *.o - -rm -f *.dwo *.dwp - if [ x"${SUBDIRS}" != x ] ; then \ - for dir in ${SUBDIRS}; \ - do \ - echo "$$dir:"; \ - if [ -d $$dir ]; then \ - (cd $$dir; $(MAKE) clean); \ - fi; \ - done ; \ - else true; fi - -distclean maintainer-clean realclean: clean - -rm -f Makefile config.status config.log - -rm -f *-init.exp gdb.log gdb.sum - -rm -fr *.log summary detail *.plog *.sum *.psum site.* - if [ x"${SUBDIRS}" != x ] ; then \ - for dir in ${SUBDIRS}; \ - do \ - echo "$$dir:"; \ - if [ -d $$dir ]; then \ - (cd $$dir; $(MAKE) distclean); \ - fi; \ - done ; \ - else true; fi diff --git a/gdb/testsuite/gdb.hp/gdb.aCC/Makefile.in b/gdb/testsuite/gdb.hp/gdb.aCC/Makefile.in deleted file mode 100644 index ff90963a41..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.aCC/Makefile.in +++ /dev/null @@ -1,25 +0,0 @@ -VPATH = @srcdir@ -srcdir = @srcdir@ - -EXECUTABLES = exception namespace optimize run - -all: - @echo "Nothing to be done for all..." - -info: -install-info: -dvi: -install: -uninstall: force -installcheck: -check: - -clean mostlyclean: - -rm -f *~ *.o *.ci - -rm -f *.dwo *.dwp - -rm -f core $(EXECUTABLES) - -distclean maintainer-clean realclean: clean - -rm -f Makefile config.status config.log - -rm -f *-init.exp - -rm -fr *.log summary detail *.plog *.sum *.psum site.* diff --git a/gdb/testsuite/gdb.hp/gdb.aCC/optimize.c b/gdb/testsuite/gdb.hp/gdb.aCC/optimize.c deleted file mode 100644 index 2a8daa8c7a..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.aCC/optimize.c +++ /dev/null @@ -1,76 +0,0 @@ -/* Source for debugging optimimzed code test. - - cc -g -O -o optimize optimize.c -*/ -int callee(); -int test_opt; - -int main() -{ - int a,b,c,d,e,f,g,h; - - a = 10;; - - /* Value propagate - */ - b = 2 * a + 1; - c = 3 * b + 2; - - /* Re-use expressions - */ - d = (2 * a + 1) * (3 * b + 2); - e = (2 * a + 1) * (3 * b + 2); - - /* Create dead stores--do lines still exist? - */ - d = (2 * a + 1) * (3 * b + 2); - e = (2 * a + 1) * (3 * b + 2); - d = (2 * a + 1) * (3 * b + 2); - e = (2 * a + 1) * (3 * b + 2); - - /* Alpha and psi motion - */ - if( test_opt ) { - f = e - d; - f = f--; - } - else { - f = e - d; - f = f + d * e; - } - - /* Chi and Rho motion - */ - h = 0; - do { - h++; - a = b * c + d * e; /* Chi */ - f = f + d * e; - g = f + d * e; /* Rho */ - callee( g+1 ); - test_opt = (test_opt != 1); /* Cycles */ - } while( g && h < 10); - - /* Opps for tail recursion, unrolling, - * folding, evaporating - */ - for( a = 0; a < 100; a++ ) { - callee( callee ( callee( a ))); - callee( callee ( callee( a ))); - callee( callee ( callee( a ))); - } - - return callee( test_opt ); -} - -/* defined late to keep line numbers the same -*/ -int callee( x ) - int x; /* not used! */ -{ - test_opt++; /* side effect */ - - return test_opt; -} - -/* end */ \ No newline at end of file diff --git a/gdb/testsuite/gdb.hp/gdb.aCC/optimize.exp b/gdb/testsuite/gdb.hp/gdb.aCC/optimize.exp deleted file mode 100644 index 60f34f78f6..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.aCC/optimize.exp +++ /dev/null @@ -1,143 +0,0 @@ -# Copyright (C) 1998-2015 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . */ - -# optimize.exp -- Expect script for testing apps compiled with -O - -# There is no DOC support for gdb yet, return 0 for now. -return 0 - -global timeout - -# use this to debug: -# -#log_user 1 - -if { [skip_hp_tests] } then { continue } - -set testfile optimize -set srcfile ${testfile}.c -set binfile ${objdir}/${subdir}/${testfile} - -if [get_compiler_info] { - return -1 -} - - -if { $gcc_compiled } then { continue } - - -# Vanilla -O, which is the same as +O2 -# -if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug optimize=+O2}] != "" } { - untested optimize.exp - return -1 -} - - -gdb_exit -gdb_start -gdb_reinitialize_dir $srcdir/$subdir - -send_gdb "file $binfile\n" -gdb_expect { - -re ".*no debugging symbols found.*$gdb_prompt $" { - fail "Didn't find debug symbols; CHFts23488" - } - -re ".*No header section (PXDB data).*$gdb_prompt $" { - fail "pointless warning" - } - -re ".*done.*$gdb_prompt $" { - pass "load debug symbols" - } - timeout { fail "timeout on file" } -} - -# Two lines at the same place after opt. -# -gdb_test "b 28" ".*" -gdb_test "b 26" ".*also set at.*" "same line" - -gdb_test "b 47" ".*" -gdb_test "b 48" ".*also set at.*" "same line" - -gdb_test "tb main" ".*" - -set old_timeout $timeout -set timeout [expr "$timeout + 200"] -send_gdb "r\n" -gdb_expect { - -re ".*No header section (PXDB data).*$gdb_prompt $" { - fail "pointless warning" - } - -re ".*main.*2\[12].*$gdb_prompt $" { - # All the lines before line 21 or 22 are - # evaporated by the compiler. - # - pass "hit main" - } - -re ".*$gdb_prompt $" { - fail "didn't hit main" - } - timeout { fail "timeout on run" } -} -set timeout $old_timeout - -gdb_test "c" ".*Breakpoint 1.*33.*" -gdb_test "c" ".*51.*" -gdb_test "cle" ".*Deleted breakpoints.*" "set 2, so del 2" - -gdb_test "b callee" ".*" -gdb_test "c" ".*callee.*" "hit called rtn" - -gdb_exit - -# +O4, don't use -g -# -if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {optimize=+O4}] != "" } { - untested optimize.exp - return -1 -} - -gdb_start -gdb_reinitialize_dir $srcdir/$subdir - -send_gdb "file $binfile\n" -gdb_expect { - -re ".*no debugging symbols found.*$gdb_prompt $" { - pass "Didn't find debug symbols, as expected" - } - -re ".*No header section (PXDB data).*$gdb_prompt $" { - fail "pointless warning" - } - -re ".*done.*$gdb_prompt $" { - fail "Somehow found debug symbols--make this a pass?" - } - timeout { fail "timeout on file" } -} - -gdb_test "b main" ".*" -gdb_test "b callee" ".*" -gdb_test "r" ".*Breakpoint 1.*main.*" -gdb_test "si 3" ".*main.*" "steps" -gdb_test "x/4i \$pc" ".*main.*main+4.*main+8.*" -gdb_test "c" ".*callee.*" "hit bp" -gdb_test "disas" ".*callee.*callee+4.*callee+12.*" -gdb_test "si" ".*callee.*" -gdb_test "fin" ".*Run till exit.*main.*" "finish" -gdb_test "x/i \$pc" ".*main+.*" "back in main" -gdb_exit - -#remote_exec build "rm -f ${binfile}" -return 0 diff --git a/gdb/testsuite/gdb.hp/gdb.aCC/run.c b/gdb/testsuite/gdb.hp/gdb.aCC/run.c deleted file mode 100644 index 60cc08e0d6..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.aCC/run.c +++ /dev/null @@ -1,37 +0,0 @@ -/* - * This simple classical example of recursion is useful for - * testing stack backtraces and such. - */ - -#include -#include - -int main (int argc, char *argv[], char **envp) -/*int argc; -char *argv[], **envp;*/ -{ - int factorial (int); -#ifdef FAKEARGV - printf ("%d\n", factorial (1)); -#else - if (argc != 2) { - printf ("usage: factorial \n"); - return 1; - } else { - printf ("%d\n", factorial (atoi (argv[1]))); - } -#endif - return 0; -} - -int factorial (int value) -/*int value;*/ -{ - int local_var; - - if (value > 1) { - value *= factorial (value - 1); - } - local_var = value; - return (value); -} diff --git a/gdb/testsuite/gdb.hp/gdb.aCC/watch-cmd.exp b/gdb/testsuite/gdb.hp/gdb.aCC/watch-cmd.exp deleted file mode 100644 index bdef945800..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.aCC/watch-cmd.exp +++ /dev/null @@ -1,148 +0,0 @@ -# Copyright (C) 1998-2015 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - -# -# test special commands -# - -if { [skip_hp_tests] } then { continue } - -set testfile "run" -set srcfile ${testfile}.c -set binfile ${objdir}/${subdir}/${testfile} -if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug additional_flags=-DFAKEARGV}] != "" } { - untested watch-cmd.exp - return -1 - -} - -if [get_compiler_info] { - return -1 -} -if { $gcc_compiled } then { continue } - - -gdb_exit -gdb_start -delete_breakpoints -gdb_reinitialize_dir $srcdir/$subdir -gdb_load ${binfile} - - - -proc watchpoint_command_test {} { - global gdb_prompt - - if [target_info exists noargs] { - verbose "Skipping watchpoint_command_test because of noargs." - return - } - - if { ![runto factorial] } then { gdb_suppress_tests } - # Don't depend upon argument passing, since most simulators don't currently - # support it. Bash value variable to be what we want. - gdb_test "p value=6" "" "set value to 6 in watchpoint_command_test" - delete_breakpoints - - # Verify that we can create a watchpoint, and give it a commands - # list that continues the inferior. We set the watchpoint on a - # local variable, too, so that it self-deletes when the watched - # data goes out of scope. - # - # What should happen is: Each time the watchpoint triggers, it - # continues the inferior. Eventually, the watchpoint will self- - # delete, when the watched variable is out of scope. But by that - # time, the inferior should have exited. GDB shouldn't crash or - # anything untoward as a result of this. - # - send_gdb "watch local_var\n" - gdb_expect { - -re ".*\[Ww\]atchpoint (\[0-9\]*): local_var.*$gdb_prompt $"\ - { pass "watch local_var" - set wp_id $expect_out(1,string) - send_gdb "commands $wp_id\n" - gdb_expect { - -re "Type commands for when breakpoint $wp_id is hit, one per line.*>"\ - { pass "begin commands on watch"} - -re "$gdb_prompt $"\ - {fail "begin commands on watch"} - timeout {fail "(timeout) begin commands on watch"} - } - } - -re "$gdb_prompt $"\ - {fail "watch local_var"} - timeout {fail "(timeout) watch local_var"} - } -# set wp_id $expect_out(1,string) -# send_gdb "commands $wp_id\n" -# gdb_expect { -# -re "Type commands for when breakpoint $wp_id is hit, one per line.*>"\ -# {pass "begin commands on watch"} -# -re "$gdb_prompt $"\ -# {fail "begin commands on watch"} -# timeout {fail "(timeout) begin commands on watch"} -# } - send_gdb "print value\n" - gdb_expect { - -re ">"\ - {pass "add print command to watch"} - -re "$gdb_prompt $"\ - {fail "add print command to watch"} - timeout {fail "(timeout) add print command to watch"} - } - send_gdb "continue\n" - gdb_expect { - -re ">"\ - {pass "add continue command to watch"} - -re "$gdb_prompt $"\ - {fail "add continue command to watch"} - timeout {fail "(timeout) add continue command to watch"} - } - send_gdb "end\n" - gdb_expect { - -re "$gdb_prompt $"\ - {pass "begin commands on watch"} - timeout {fail "(timeout) begin commands on watch"} - } - send_gdb "continue\n" - gdb_expect { - -re "Continuing.*\[Ww\]atchpoint $wp_id deleted because the program has left the block in.*which its expression is valid.*in main.*$gdb_prompt $"\ - {pass "continue with watch"} - -re "$gdb_prompt $"\ - {fail "continue with watch"} - timeout {fail "(timeout) continue with watch"} - } - send_gdb "continue\n" - gdb_expect { - -re "Continuing.*$gdb_prompt $"\ - {pass "continue until exit"} - -re "$gdb_prompt $"\ - {fail "continue until exit"} - timeout {fail "(timeout) continue until exit"} - } -} - -watchpoint_command_test - - - - - - - - - - - diff --git a/gdb/testsuite/gdb.hp/gdb.base-hp/Makefile.in b/gdb/testsuite/gdb.hp/gdb.base-hp/Makefile.in deleted file mode 100644 index 633266a002..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.base-hp/Makefile.in +++ /dev/null @@ -1,30 +0,0 @@ -VPATH = @srcdir@ -srcdir = @srcdir@ - -EXECUTABLES = dollar hwwatchbus.bak pxdb reg reg-pa64 \ - so-thresh genso-thresh sized-enum - -MISCELLANEOUS = so-thresh.c so-thresh.lopt so-thresh.make.out \ - lib*-so-thresh.* - -all: - @echo "Nothing to be done for all..." - -info: -install-info: -dvi: -install: -uninstall: force -installcheck: -check: - -clean mostlyclean: - -rm -f *~ *.o *.ci - -rm -f *.dwo *.dwp - -rm -f core $(EXECUTABLES) - -rm -f $(MISCELLANEOUS) - -distclean maintainer-clean realclean: clean - -rm -f Makefile config.status config.log - -rm -f *-init.exp - -rm -fr *.log summary detail *.plog *.sum *.psum site.* diff --git a/gdb/testsuite/gdb.hp/gdb.base-hp/callfwmall.c b/gdb/testsuite/gdb.hp/gdb.base-hp/callfwmall.c deleted file mode 100644 index f22a24862c..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.base-hp/callfwmall.c +++ /dev/null @@ -1,358 +0,0 @@ -/* Support program for testing gdb's ability to call functions - in an inferior which doesn't itself call malloc, pass appropriate - arguments to those functions, and get the returned result. */ - -#ifdef NO_PROTOTYPES -#define PARAMS(paramlist) () -#else -#define PARAMS(paramlist) paramlist -#endif - -# include - -char char_val1 = 'a'; -char char_val2 = 'b'; - -short short_val1 = 10; -short short_val2 = -23; - -int int_val1 = 87; -int int_val2 = -26; - -long long_val1 = 789; -long long_val2 = -321; - -float float_val1 = 3.14159; -float float_val2 = -2.3765; - -double double_val1 = 45.654; -double double_val2 = -67.66; - -#define DELTA (0.001) - -char *string_val1 = (char *)"string 1"; -char *string_val2 = (char *)"string 2"; - -char char_array_val1[] = "carray 1"; -char char_array_val2[] = "carray 2"; - -struct struct1 { - char c; - short s; - int i; - long l; - float f; - double d; - char a[4]; -} struct_val1 = { 'x', 87, 76, 51, 2.1234, 9.876, "foo" }; - -/* Some functions that can be passed as arguments to other test - functions, or called directly. */ -#ifdef PROTOTYPES -int add (int a, int b) -#else -int add (a, b) int a, b; -#endif -{ - return (a + b); -} - -#ifdef PROTOTYPES -int doubleit (int a) -#else -int doubleit (a) -int a; -#endif -{ - return (a + a); -} - -int (*func_val1) PARAMS((int,int)) = add; -int (*func_val2) PARAMS((int)) = doubleit; - -/* An enumeration and functions that test for specific values. */ - -enum enumtype { enumval1, enumval2, enumval3 }; -enum enumtype enum_val1 = enumval1; -enum enumtype enum_val2 = enumval2; -enum enumtype enum_val3 = enumval3; - -#ifdef PROTOTYPES -int t_enum_value1 (enum enumtype enum_arg) -#else -t_enum_value1 (enum_arg) -enum enumtype enum_arg; -#endif -{ - return (enum_arg == enum_val1); -} - -#ifdef PROTOTYPES -int t_enum_value2 (enum enumtype enum_arg) -#else -t_enum_value2 (enum_arg) -enum enumtype enum_arg; -#endif -{ - return (enum_arg == enum_val2); -} - -#ifdef PROTOTYPES -int t_enum_value3 (enum enumtype enum_arg) -#else -t_enum_value3 (enum_arg) -enum enumtype enum_arg; -#endif -{ - return (enum_arg == enum_val3); -} - -/* A function that takes a vector of integers (along with an explicit - count) and returns their sum. */ - -#ifdef PROTOTYPES -int sum_args (int argc, int argv[]) -#else -int sum_args (argc, argv) -int argc; -int argv[]; -#endif -{ - int sumval = 0; - int idx; - - for (idx = 0; idx < argc; idx++) - { - sumval += argv[idx]; - } - return (sumval); -} - -/* Test that we can call functions that take structs and return - members from that struct */ - -#ifdef PROTOTYPES -char t_structs_c (struct struct1 tstruct) { return (tstruct.c); } -short t_structs_s (struct struct1 tstruct) { return (tstruct.s); } -int t_structs_i (struct struct1 tstruct) { return (tstruct.i); } -long t_structs_l (struct struct1 tstruct) { return (tstruct.l); } -float t_structs_f (struct struct1 tstruct) { return (tstruct.f); } -double t_structs_d (struct struct1 tstruct) { return (tstruct.d); } -char *t_structs_a (struct struct1 tstruct) -{ - static char buf[8]; - strcpy (buf, tstruct.a); - return buf; -} -#else -char t_structs_c (tstruct) struct struct1 tstruct; { return (tstruct.c); } -short t_structs_s (tstruct) struct struct1 tstruct; { return (tstruct.s); } -int t_structs_i (tstruct) struct struct1 tstruct; { return (tstruct.i); } -long t_structs_l (tstruct) struct struct1 tstruct; { return (tstruct.l); } -float t_structs_f (tstruct) struct struct1 tstruct; { return (tstruct.f); } -double t_structs_d (tstruct) struct struct1 tstruct; { return (tstruct.d); } -char *t_structs_a (tstruct) struct struct1 tstruct; -{ - static char buf[8]; - strcpy (buf, tstruct.a); - return buf; -} -#endif - -/* Test that calling functions works if there are a lot of arguments. */ -#ifdef PROTOTYPES -int sum10 (int i0, int i1, int i2, int i3, int i4, int i5, int i6, int i7, int i8, int i9) -#else -int -sum10 (i0, i1, i2, i3, i4, i5, i6, i7, i8, i9) - int i0, i1, i2, i3, i4, i5, i6, i7, i8, i9; -#endif -{ - return i0 + i1 + i2 + i3 + i4 + i5 + i6 + i7 + i8 + i9; -} - -/* Gotta have a main to be able to generate a linked, runnable - executable, and also provide a useful place to set a breakpoint. */ - -#ifdef PROTOTYPES -int main() -#else -main () -#endif -{ - t_structs_c(struct_val1); - return 0; - -} - -/* Functions that expect specific values to be passed and return - either 0 or 1, depending upon whether the values were - passed incorrectly or correctly, respectively. */ - -#ifdef PROTOTYPES -int t_char_values (char char_arg1, char char_arg2) -#else -int t_char_values (char_arg1, char_arg2) -char char_arg1, char_arg2; -#endif -{ - return ((char_arg1 == char_val1) && (char_arg2 == char_val2)); -} - -int -#ifdef PROTOTYPES -t_small_values (char arg1, short arg2, int arg3, char arg4, short arg5, - char arg6, short arg7, int arg8, short arg9, short arg10) -#else -t_small_values (arg1, arg2, arg3, arg4, arg5, arg6, arg7, arg8, arg9, arg10) - char arg1; - short arg2; - int arg3; - char arg4; - short arg5; - char arg6; - short arg7; - int arg8; - short arg9; - short arg10; -#endif -{ - return arg1 + arg2 + arg3 + arg4 + arg5 + arg6 + arg7 + arg8 + arg9 + arg10; -} - -#ifdef PROTOTYPES -int t_short_values (short short_arg1, short short_arg2) -#else -int t_short_values (short_arg1, short_arg2) -short short_arg1, short_arg2; -#endif -{ - return ((short_arg1 == short_val1) && (short_arg2 == short_val2)); -} - -#ifdef PROTOTYPES -int t_int_values (int int_arg1, int int_arg2) -#else -int t_int_values (int_arg1, int_arg2) -int int_arg1, int_arg2; -#endif -{ - return ((int_arg1 == int_val1) && (int_arg2 == int_val2)); -} - -#ifdef PROTOTYPES -int t_long_values (long long_arg1, long long_arg2) -#else -int t_long_values (long_arg1, long_arg2) -long long_arg1, long_arg2; -#endif -{ - return ((long_arg1 == long_val1) && (long_arg2 == long_val2)); -} - -/* NOTE: THIS FUNCTION MUST NOT BE PROTOTYPED!!!!! - There must be one version of "t_float_values" (this one) - that is not prototyped, and one (if supported) that is (following). - That way GDB can be tested against both cases. */ - -int t_float_values (float_arg1, float_arg2) -float float_arg1, float_arg2; -{ - return ((float_arg1 - float_val1) < DELTA - && (float_arg1 - float_val1) > -DELTA - && (float_arg2 - float_val2) < DELTA - && (float_arg2 - float_val2) > -DELTA); -} - -int -#ifdef NO_PROTOTYPES -/* In this case we are just duplicating t_float_values, but that is the - easiest way to deal with either ANSI or non-ANSI. */ -t_float_values2 (float_arg1, float_arg2) - float float_arg1, float_arg2; -#else -t_float_values2 (float float_arg1, float float_arg2) -#endif -{ - return ((float_arg1 - float_val1) < DELTA - && (float_arg1 - float_val1) > -DELTA - && (float_arg2 - float_val2) < DELTA - && (float_arg2 - float_val2) > -DELTA); -} - -#ifdef PROTOTYPES -int t_double_values (double double_arg1, double double_arg2) -#else -int t_double_values (double_arg1, double_arg2) -double double_arg1, double_arg2; -#endif -{ - return ((double_arg1 - double_val1) < DELTA - && (double_arg1 - double_val1) > -DELTA - && (double_arg2 - double_val2) < DELTA - && (double_arg2 - double_val2) > -DELTA); -} - -#ifdef PROTOTYPES -int t_string_values (char *string_arg1, char *string_arg2) -#else -int t_string_values (string_arg1, string_arg2) -char *string_arg1, *string_arg2; -#endif -{ - return (!strcmp (string_arg1, string_val1) && - !strcmp (string_arg2, string_val2)); -} - -#ifdef PROTOTYPES -int t_char_array_values (char char_array_arg1[], char char_array_arg2[]) -#else -int t_char_array_values (char_array_arg1, char_array_arg2) -char char_array_arg1[], char_array_arg2[]; -#endif -{ - return (!strcmp (char_array_arg1, char_array_val1) && - !strcmp (char_array_arg2, char_array_val2)); -} - - -/* This used to simply compare the function pointer arguments with - known values for func_val1 and func_val2. Doing so is valid ANSI - code, but on some machines (RS6000, HPPA, others?) it may fail when - called directly by GDB. - - In a nutshell, it's not possible for GDB to determine when the address - of a function or the address of the function's stub/trampoline should - be passed. - - So, to avoid GDB lossage in the common case, we perform calls through the - various function pointers and compare the return values. For the HPPA - at least, this allows the common case to work. - - If one wants to try something more complicated, pass the address of - a function accepting a "double" as one of its first 4 arguments. Call - that function indirectly through the function pointer. This would fail - on the HPPA. */ - -#ifdef PROTOTYPES -int t_func_values (int (*func_arg1)(int, int), int (*func_arg2)(int)) -#else -int t_func_values (func_arg1, func_arg2) -int (*func_arg1) PARAMS ((int, int)); -int (*func_arg2) PARAMS ((int)); -#endif -{ - return ((*func_arg1) (5,5) == (*func_val1) (5,5) - && (*func_arg2) (6) == (*func_val2) (6)); -} - -#ifdef PROTOTYPES -int t_call_add (int (*func_arg1)(int, int), int a, int b) -#else -int t_call_add (func_arg1, a, b) -int (*func_arg1) PARAMS ((int, int)); -int a, b; -#endif -{ - return ((*func_arg1)(a, b)); -} diff --git a/gdb/testsuite/gdb.hp/gdb.base-hp/callfwmall.exp b/gdb/testsuite/gdb.hp/gdb.base-hp/callfwmall.exp deleted file mode 100644 index 9846bb4434..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.base-hp/callfwmall.exp +++ /dev/null @@ -1,334 +0,0 @@ -# Copyright 1997-2015 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . */ - -# This file was written by Fred Fish. (fnf@cygnus.com) - -# These tests are the same as those in callfuncs.exp, except that the -# test program here does not call malloc. -# -# "What in the world does malloc have to do with calling functions in -# the inferior?" Well, nothing. GDB's ability to invoke a function -# in the inferior program works just fine in programs that have no -# malloc function available. It doesn't rely on the inferior's -# malloc, directly or indirectly. It just uses the inferior's stack -# space. -# -# "Then what's the point of this test file?" Well, it just so happens -# that this file, in addition to testing inferior function calls, also -# tests GDB's ability to evaluate string literals (like "string 1" and -# "string 2" in the tests below). Evaluating *those* sorts of -# expressions does require malloc. -# -# (As an extension to C, GDB also has a syntax for literal arrays of -# anything, not just characters. For example, the expression -# {2,3,4,5} (which appears in the tests below) evaluates to an array -# of four ints. So rather than talking just about string literals, -# we'll use the broader term "array literals".) -# -# Now, in this file, we only evaluate array literals when we're about -# to pass them to a function, but don't be confused --- this is a red -# herring. You can evaluate "abcdef" even if you're not about to pass -# that to a function, and doing so requires malloc even if you're just -# going to store a pointer to it in a variable, like this: -# -# (gdb) ptype s -# type = char * -# (gdb) set variable s = "abcdef" -# -# According to C's rules for evaluating expressions, arrays are -# converted into pointers to their first element. This means that, in -# order to evaluate an expression like "abcdef", GDB needs to actually -# find some memory in the inferior we can plop the characters into; -# then we use that memory's address as the address of our array -# literal. GDB finds this memory by calling the inferior's malloc -# function, if it has one. So, evaluating an array literal depends on -# performing an inferior function call, but not vice versa. (GDB -# can't just allocate the space on the stack; the pointer may remain -# live long after the current frame has been popped.) -# -# "But, if evaluating array literals requires malloc, what's the point -# of testing that GDB can do so in a program that doesn't have malloc? -# It can't work!" On most systems, that's right, but HP-UX has some -# sort of dynamic linking magic that ensures that *every* program has -# malloc. So on HP-UX, GDB can evaluate array literals even in -# inferior programs that don't use malloc. That's why this test is in -# gdb.hp. -# -# This file has, for some reason, led to well more than its fair share -# of misunderstandings about the relationship between array literal -# expressions and inferior function calls. Folks talk as if you can -# only evaluate array literals when you're about to pass them to a -# function. I think they're assuming that, since GDB is constructing -# a new frame on the inferior's stack (correct), it's going to use -# that space for the array literals (incorrect). Remember that those -# array literals may need to be live long after the inferior function -# call returns; GDB can't tell. -# -# What makes the confusion worse is that there *is* a relationship -# between array literals and inferior function calls --- GDB uses -# inferior function calls to evaluate array literals. But many people -# jump to other, incorrect conclusions about this. - - -if { [skip_hp_tests] } then { continue } - -set testfile "callfwmall" -set srcfile ${testfile}.c -set binfile ${objdir}/${subdir}/${testfile} - -if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } { - untested callfwmall.exp - return -1 -} - -# Create and source the file that provides information about the compiler -# used to compile the test case. - -if [get_compiler_info] { - return -1 -} - -if {$hp_aCC_compiler} { - set prototypes 1 -} else { - set prototypes 0 -} - - -# Some targets can't call functions, so don't even bother with this -# test. -if [target_info exists gdb,cannot_call_functions] { - setup_xfail "*-*-*" 2416 - fail "This target can not call functions" - continue -} - -# Set the current language to C. This counts as a test. If it -# fails, then we skip the other tests. - -proc set_lang_c {} { - global gdb_prompt - - send_gdb "set language c\n" - gdb_expect { - -re ".*$gdb_prompt $" {} - timeout { fail "set language c (timeout)" ; return 0 } - } - - send_gdb "show language\n" - gdb_expect { - -re ".* source language is \"c\".*$gdb_prompt $" { - pass "set language to \"c\"" - return 1 - } - -re ".*$gdb_prompt $" { - fail "setting language to \"c\"" - return 0 - } - timeout { - fail "can't show language (timeout)" - return 0 - } - } -} - -# FIXME: Before calling this proc, we should probably verify that -# we can call inferior functions and get a valid integral value -# returned. -# Note that it is OK to check for 0 or 1 as the returned values, because C -# specifies that the numeric value of a relational or logical expression -# (computed in the inferior) is 1 for true and 0 for false. - -proc do_function_calls {} { - global prototypes - global gcc_compiled - global gdb_prompt - - # We need to up this because this can be really slow on some boards. - set timeout 60 - - gdb_test "p t_char_values(0,0)" " = 0" - gdb_test "p t_char_values('a','b')" " = 1" - gdb_test "p t_char_values(char_val1,char_val2)" " = 1" - gdb_test "p t_char_values('a',char_val2)" " = 1" - gdb_test "p t_char_values(char_val1,'b')" " = 1" - - gdb_test "p t_short_values(0,0)" " = 0" - gdb_test "p t_short_values(10,-23)" " = 1" - gdb_test "p t_short_values(short_val1,short_val2)" " = 1" - gdb_test "p t_short_values(10,short_val2)" " = 1" - gdb_test "p t_short_values(short_val1,-23)" " = 1" - - gdb_test "p t_int_values(0,0)" " = 0" - gdb_test "p t_int_values(87,-26)" " = 1" - gdb_test "p t_int_values(int_val1,int_val2)" " = 1" - gdb_test "p t_int_values(87,int_val2)" " = 1" - gdb_test "p t_int_values(int_val1,-26)" " = 1" - - gdb_test "p t_long_values(0,0)" " = 0" - gdb_test "p t_long_values(789,-321)" " = 1" - gdb_test "p t_long_values(long_val1,long_val2)" " = 1" - gdb_test "p t_long_values(789,long_val2)" " = 1" - gdb_test "p t_long_values(long_val1,-321)" " = 1" - - if ![target_info exists gdb,skip_float_tests] { - gdb_test "p t_float_values(0.0,0.0)" " = 0" - - # These next four tests fail on the mn10300. - # The first value is passed in regs, the other in memory. - # Gcc emits different stabs for the two parameters; the first is - # claimed to be a float, the second a double. - # dbxout.c in gcc claims this is the desired behavior. - setup_xfail "mn10300-*-*" - gdb_test "p t_float_values(3.14159,-2.3765)" " = 1" - setup_xfail "mn10300-*-*" - gdb_test "p t_float_values(float_val1,float_val2)" " = 1" - setup_xfail "mn10300-*-*" - gdb_test "p t_float_values(3.14159,float_val2)" " = 1" - setup_xfail "mn10300-*-*" - gdb_test "p t_float_values(float_val1,-2.3765)" " = 1" - - # Test passing of arguments which might not be widened. - gdb_test "p t_float_values2(0.0,0.0)" " = 0" - - # Although PR 5318 mentions SunOS specifically, this seems - # to be a generic problem on quite a few platforms. - if $prototypes then { - setup_xfail "sparc-*-*" "mips*-*-*" 5318 - if {!$gcc_compiled} then { - setup_xfail "i*86-*-sysv4*" 5318 - } - } - gdb_test "p t_float_values2(3.14159,float_val2)" " = 1" - gdb_test "p t_small_values(1,2,3,4,5,6,7,8,9,10)" " = 55" - - gdb_test "p t_double_values(0.0,0.0)" " = 0" - gdb_test "p t_double_values(45.654,-67.66)" " = 1" - gdb_test "p t_double_values(double_val1,double_val2)" " = 1" - gdb_test "p t_double_values(45.654,double_val2)" " = 1" - gdb_test "p t_double_values(double_val1,-67.66)" " = 1" - - } - - gdb_test "p t_string_values(string_val2,string_val1)" " = 0" - gdb_test "p t_string_values(string_val1,string_val2)" " = 1" - gdb_test "p t_string_values(\"string 1\",\"string 2\")" " = 1" - gdb_test "p t_string_values(\"string 1\",string_val2)" " = 1" - gdb_test "p t_string_values(string_val1,\"string 2\")" " = 1" - - gdb_test "p t_char_array_values(char_array_val2,char_array_val1)" " = 0" - gdb_test "p t_char_array_values(char_array_val1,char_array_val2)" " = 1" - gdb_test "p t_char_array_values(\"carray 1\",\"carray 2\")" " = 1" - gdb_test "p t_char_array_values(\"carray 1\",char_array_val2)" " = 1" - gdb_test "p t_char_array_values(char_array_val1,\"carray 2\")" " = 1" - - gdb_test "p doubleit(4)" " = 8" - gdb_test "p add(4,5)" " = 9" - gdb_test "p t_func_values(func_val2,func_val1)" " = 0" - gdb_test "p t_func_values(func_val1,func_val2)" " = 1" - - # On the rs6000, we need to pass the address of the trampoline routine, - # not the address of add itself. I don't know how to go from add to - # the address of the trampoline. Similar problems exist on the HPPA, - # and in fact can present an unsolvable problem as the stubs may not - # even exist in the user's program. We've slightly recoded t_func_values - # to avoid such problems in the common case. This may or may not help - # the RS6000. - setup_xfail "rs6000*-*-*" - - if {![istarget hppa*-*-hpux*]} then { - gdb_test "p t_func_values(add,func_val2)" " = 1" - } - - setup_xfail "rs6000*-*-*" - - if {![istarget hppa*-*-hpux*]} then { - gdb_test "p t_func_values(func_val1,doubleit)" " = 1" - } - - gdb_test "p t_call_add(func_val1,3,4)" " = 7" - - setup_xfail "rs6000*-*-*" - - if {![istarget hppa*-*-hpux*]} then { - gdb_test "p t_call_add(add,3,4)" " = 7" - } - - gdb_test "p t_enum_value1(enumval1)" " = 1" - gdb_test "p t_enum_value1(enum_val1)" " = 1" - gdb_test "p t_enum_value1(enum_val2)" " = 0" - - gdb_test "p t_enum_value2(enumval2)" " = 1" - gdb_test "p t_enum_value2(enum_val2)" " = 1" - gdb_test "p t_enum_value2(enum_val1)" " = 0" - - gdb_test "p sum_args(1,{2})" " = 2" - gdb_test "p sum_args(2,{2,3})" " = 5" - gdb_test "p sum_args(3,{2,3,4})" " = 9" - gdb_test "p sum_args(4,{2,3,4,5})" " = 14" - gdb_test "p sum10 (1, 2, 3, 4, 5, 6, 7, 8, 9, 10)" " = 55" - - gdb_test "p t_structs_c(struct_val1)" "= 120 'x'" \ - "call inferior func with struct - returns char" - gdb_test "p t_structs_s(struct_val1)" "= 87" \ - "call inferior func with struct - returns short" - gdb_test "p t_structs_i(struct_val1)" "= 76" \ - "call inferior func with struct - returns int" - gdb_test "p t_structs_l(struct_val1)" "= 51" \ - "call inferior func with struct - returns long" - gdb_test "p t_structs_f(struct_val1)" "= 2.12.*" \ - "call inferior func with struct - returns float" - gdb_test "p t_structs_d(struct_val1)" "= 9.87.*" \ - "call inferior func with struct - returns double" - gdb_test "p t_structs_a(struct_val1)" "= (.unsigned char .. )?\"foo\"" \ - "call inferior func with struct - returns char *" - -} - -# Start with a fresh gdb. - -gdb_exit -gdb_start -gdb_reinitialize_dir $srcdir/$subdir -gdb_load ${binfile} - -gdb_test "set print sevenbit-strings" "" -gdb_test "set print address off" "" -gdb_test "set width 0" "" - -if { $hp_aCC_compiler } { - # Do not set language explicitly to 'C'. This will cause aCC - # tests to fail because promotion rules are different. Just let - # the language be set to the default. - - if { ![runto_main] } { - gdb_suppress_tests - } - - gdb_test "set overload-resolution 0" ".*" -} else { - if { ![set_lang_c] } { - gdb_suppress_tests - } else { - if { ![runto_main] } { - gdb_suppress_tests - } - } -} - -gdb_test "next" ".*" -do_function_calls - -return 0 diff --git a/gdb/testsuite/gdb.hp/gdb.base-hp/dollar.c b/gdb/testsuite/gdb.hp/gdb.base-hp/dollar.c deleted file mode 100644 index 8fd9893c70..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.base-hp/dollar.c +++ /dev/null @@ -1,10 +0,0 @@ -#ifdef PROTOTYPES -int main (int argc, char **argv) -#else -main (argc, argv, envp) - int argc; - char **argv; -#endif -{ - return 0; -} diff --git a/gdb/testsuite/gdb.hp/gdb.base-hp/dollar.exp b/gdb/testsuite/gdb.hp/gdb.base-hp/dollar.exp deleted file mode 100644 index 98b9664876..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.base-hp/dollar.exp +++ /dev/null @@ -1,146 +0,0 @@ -# Copyright (C) 1997-2015 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - -# GDB tests for names beginning with '$' - -# This is aimed at HP-UX systems where a lot of system -# routines and names begin with '$' or '$$'. GDB 4.16 was -# unable to deal with these names as they clashed with -# convenience variables. Wildebeest should accept such -# names in preference to convenience variables. - -# This file was written by Satish Pai -# 1997-09-24 - -# -# test running programs -# - -if { [skip_hp_tests] } { continue } - -set testfile "dollar" -set srcfile ${testfile}.c -set binfile ${objdir}/${subdir}/${testfile} - -if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } { - untested dollar.exp - return -1 -} - -#source ${binfile}.ci - -gdb_exit -gdb_start -gdb_reinitialize_dir $srcdir/$subdir -gdb_load ${binfile} - -# -# set it up at a breakpoint so we can play with the variable values -# - -if ![runto_main] then { - perror "couldn't run to breakpoint" - continue -} - -# Test for millicode routines -# hppa64 does not support dyncall -if ![istarget "hppa64*-*-*"] { -send_gdb "print \$\$dyncall\n" -gdb_expect { - -re "\\$\[0-9\]* = \\{\\} $hex <>.*$gdb_prompt $" { pass "print \$\$dyncall" } - -re "\\$\[0-9\]* = \\{\\} $hex <.*dyncall>.*$gdb_prompt $" { pass "print \$\$dyncall" } - -re "\\$\[0-9\]* = void" { fail "print \$\$dyncall -- interpreted as convenience var" } - -re "$gdb_prompt $" { fail "print \$\$dyncall" } - timeout { fail "(timeout) print \$\$dyncall" } -} -send_gdb "print \$\$dyncall_external\n" -gdb_expect { - -re "\\$\[0-9\]* = \\{\\} $hex <>.*$gdb_prompt $" { pass "print \$\$dyncall_external" } - -re "\\$\[0-9\]* = \\{\\} $hex <.*dyncall_external>.*$gdb_prompt $" { pass "print \$\$dyncall_external" } - -re "\\$\[0-9\]* = void" { fail "print \$\$dyncall_external -- interpreted as convenience var" } - -re "$gdb_prompt $" { fail "print \$\$dyncall_external" } - timeout { fail "(timeout) print \$\$dyncall_external" } -} - -# Set a breakpoint on a millicode routine -send_gdb "break \$\$dyncall\n" -gdb_expect { - -re "Breakpoint \[0-9\]* at $hex.*$gdb_prompt $" { pass "break \$\$dyncall" } - -re "Function.*not defined.*$gdb_prompt $" {fail "break \$\$dyncall -- no \$\$dyncall?" } - -re "Convenience variables used in line specs must have integer values\\..*$gdb_prompt $" { - fail "break \$\$dyncall -- treated as convenince variable" - } - -re "$gdb_prompt $" { fail "print break \$\$dyncall" } - timeout { fail "(timeout) print break \$\$dyncall" } -} - -# Disassemble $$dyncall -send_gdb "disassemble \$\$dyncall\n" -gdb_expect { - -re "Dump of assembler code for function.*$gdb_prompt $" { pass "disas \$\$dyncall" } - -re "$gdb_prompt $" { fail "disas \$\$dyncall" } - timeout { fail "(timeout) disas \$\$dyncall" } -} - -# Try to set $$dyncall like a convenience var. -send_gdb "set \$\$dyncall = 77\n" -gdb_expect { - -re "Invalid cast.*$gdb_prompt $" { pass "set \$\$dyncall = 77" } - -re "$gdb_prompt $" { fail "set \$\$dyncall = 77" } - timeout { fail "(timeout) set \$\$dyncall = 77" } -} -} - -# Try out some other $ name, not millicode -if [istarget "hppa64*-*-*"] { - #hppa64 uses __argv instead of $ARGV. - send_gdb "print \__argv\n" - gdb_expect { - -re "\\$\[0-9\]* = \[0-9\]*.*$gdb_prompt $" { pass "print \__argv" } - -re "\\$\[0-9\]* = void.*$gdb_prompt $" { - fail "print \__argv (interpreted as convenience var)" - } - -re "$gdb_prompt $" { fail "print \__argv" } - timeout { fail "(timeout) print \__argv" } - } - - send_gdb "ptype \__argv\n" - gdb_expect { - -re "type = .*$gdb_prompt $" { - pass "ptype \__argv" - } - -re "type = void.*$gdb_prompt $" { - fail "ptype \__argv (interpreted as convenience var)" - } - -re "$gdb_prompt $" { fail "ptype \__argv" } - timeout { fail "(timeout) ptype \__argv" } - } -} else { -send_gdb "print \$ARGV\n" -gdb_expect { - -re "\\$\[0-9\]* = \[0-9\]*.*$gdb_prompt $" { pass "print \$ARGV" } - -re "\\$\[0-9\]* = void.*$gdb_prompt $" { fail "print \$ARGV (interpreted as convenience var)" } - -re "$gdb_prompt $" { fail "print \$ARGV" } - timeout { fail "(timeout) print \$ARGV" } -} -send_gdb "ptype \$ARGV\n" -gdb_expect { - -re "type = .*$gdb_prompt $" { pass "ptype \$ARGV" } - -re "type = void.*$gdb_prompt $" { fail "ptype \$ARGV (interpreted as convenience var)" } - -re "$gdb_prompt $" { fail "ptype \$ARGV" } - timeout { fail "(timeout) ptype \$ARGV" } -} -} diff --git a/gdb/testsuite/gdb.hp/gdb.base-hp/genso-thresh.c b/gdb/testsuite/gdb.hp/gdb.base-hp/genso-thresh.c deleted file mode 100644 index 50756bb975..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.base-hp/genso-thresh.c +++ /dev/null @@ -1,229 +0,0 @@ -/* - * Program to generate the so-thresh testcase, - * including associated linked-against shared libraries. - * Build as: - * - * cc -g -o genso-thresh genso-thresh.c - * - * Invoke as: - * - * genso-thresh - * - * It will put all the code in the current directory ("."). - * - * A makefile can also be generated if the -makemake option is used. - * To use the makefile: - * - * make -f so-thresh.mk all - * - * The name of the application is - * - * so-thresh - * - * (Revised from a program by John Bishop. --rehrauer) - */ - -#include -#include -#include - -int main (argc, argv) -int argc; -char **argv; -{ -#define NUMBER_OF_INT_VARS 1500 -#define NUMBER_OF_LIBS 3 - int lib_num = NUMBER_OF_LIBS; - int i; - int i2; - FILE *main_file; - FILE *lib_file; - FILE *make_file; - FILE *link_file; - - char testcase_name [1000]; - char linkfile_name [1000]; - char makefile_name [1000]; - char mainfile_name [1000]; - - char file_name[100]; - /* - * 0123456789 <-- length of field - * "./fil0000000002.c"; <-- typical filename - * 12345678901234567890 <-- length of string - * 10 20 - * ^where null goes - */ - char file_name_core[100]; - - /* Verify input. - */ - if ((argc < 1) || (argc > 2) || (argv == NULL) || - ((argc == 2) && (strcmp (argv[1], "-makemake") != 0))) - { - printf ("** Syntax: %s [-makemake]\n", argv[0]); - return; - } - - if (strncmp (argv[0], "gen", 3) != 0) - { - printf ("** This tool expected to be named \"gen\"\n"); - return; - } - strcpy (testcase_name, argv[0]+3); - - strcpy (linkfile_name, testcase_name); - strcat (linkfile_name, ".lopt"); - link_file = fopen (linkfile_name, "w"); - fprintf (link_file, "# Linker options for %s test\n", testcase_name); - - /* Generate the makefile, if requested. - */ - if (argc == 2) - { - strcpy (makefile_name, testcase_name); - strcat (makefile_name, ".mk.new"); - make_file = fopen (makefile_name, "w"); - printf (" Note: New makefile (%s) generated.\n", makefile_name); - printf (" May want to update existing makefile, if any.\n"); - fprintf (make_file, "# Generated automatically by %s\n", argv[0]); - fprintf (make_file, "# Make file for %s test\n", testcase_name); - fprintf (make_file, "\n"); - fprintf (make_file, "CFLAGS = +DA1.1 -g\n"); - fprintf (make_file, "\n"); - fprintf (make_file, "# This is how to build this generator.\n"); - fprintf (make_file, "%s.o: %s.c\n", argv[0], argv[0]); - fprintf (make_file, "\t$(CC) $(CFLAGS) -o %s.o -c %s.c\n", argv[0], argv[0]); - fprintf (make_file, "%s: %s.o\n", argv[0], argv[0]); - fprintf (make_file, "\t$(CC) $(CFLAGS) -o %s %s.o\n", argv[0], argv[0]); - fprintf (make_file, "\n"); - fprintf (make_file, "# This is how to run this generator.\n"); - fprintf (make_file, "# This target should be made before the 'all' target,\n"); - fprintf (make_file, "# to ensure that the shlib sources are all available.\n"); - fprintf (make_file, "require_shlibs: %s\n", argv[0]); - for (i=0; i < lib_num; i++) - { - fprintf (make_file, "\tif ! [ -a lib%2.2d_%s.c ] ; then \\\n", i, testcase_name); - fprintf (make_file, "\t %s ; \\\n", argv[0]); - fprintf (make_file, "\tfi\n"); - } - fprintf (make_file, "\n"); - fprintf (make_file, "# This is how to build all the shlibs.\n"); - fprintf (make_file, "# Be sure to first make the require_shlibs target!\n"); - for (i=0; i < lib_num; i++) - { - fprintf (make_file, "lib%2.2d_%s.o: lib%2.2d_%s.c\n", i, testcase_name, i, testcase_name); - fprintf (make_file, "\t$(CC) $(CFLAGS) +Z -o lib%2.2d_%s.o -c lib%2.2d_%s.c\n", i, testcase_name, i, testcase_name); - fprintf (make_file, "lib%2.2d-%s.sl: lib%2.2d-%s.o\n", i, testcase_name, i, testcase_name); - fprintf (make_file, "\t$(LD) $(LDFLAGS) -b -o lib%2.2d-%s.sl lib%2.2d-%s.o\n", i, testcase_name, i, testcase_name); - } - fprintf (make_file, "\n"); -fprintf (make_file, "# For convenience, here's names for all pieces of all shlibs.\n"); - fprintf (make_file, "SHLIB_SOURCES = \\\n"); - for (i=0; i < lib_num-1; i++) - fprintf (make_file, "\tlib%2.2d-%s.c \\\n", i, testcase_name); - fprintf (make_file, "\tlib%2.2d-%s.c\n", lib_num-1, testcase_name); - fprintf (make_file, "SHLIB_OBJECTS = $(SHLIB_SOURCES:.c=.o)\n"); - fprintf (make_file, "SHLIBS = $(SHLIB_SOURCES:.c=.sl)\n"); - fprintf (make_file, "SHLIB_NAMES = $(SHLIB_SOURCES:.c=)\n"); - fprintf (make_file, "EXECUTABLES = $(SHLIBS) %s %s\n", argv[0], testcase_name); - fprintf (make_file, "OBJECT_FILES = $(SHLIB_OBJECTS) %s.o %s.o\n", argv[0], testcase_name); - fprintf (make_file, "\n"); - fprintf (make_file, "shlib_objects: $(SHLIB_OBJECTS)\n"); - fprintf (make_file, "shlibs: $(SHLIBS)\n"); - fprintf (make_file, "\n"); - fprintf (make_file, "# This is how to build the debuggable testcase that uses the shlibs.\n"); - fprintf (make_file, "%s.o: %s.c\n", testcase_name, testcase_name); - fprintf (make_file, "\t$(CC) $(CFLAGS) -o %s.o -c %s.c\n", testcase_name, testcase_name); - fprintf (make_file, "%s: shlibs %s.o\n", testcase_name, testcase_name); - fprintf (make_file, "\t$(LD) $(LDFLAGS) -o %s -lc -L. ", testcase_name); - fprintf (make_file, "-c %s /opt/langtools/lib/end.o /lib/crt0.o %s.o\n", linkfile_name, testcase_name); - fprintf (make_file, "\n"); - fprintf (make_file, "# Yeah, but you should first make the require_shlibs target!\n"); - fprintf (make_file, "all: %s %s\n", testcase_name, argv[0]); - fprintf (make_file, "\n"); - fprintf (make_file, "# To remove everything built via this makefile...\n"); - fprintf (make_file, "clean:\n"); - /* Do this carefully, to avoid hitting silly HP-UX ARG_MAX limits... */ - fprintf (make_file, "\trm -f lib0*-%s.*\n", testcase_name); - fprintf (make_file, "\trm -f lib1*-%s.*\n", testcase_name); - fprintf (make_file, "\trm -f lib2*-%s.*\n", testcase_name); - fprintf (make_file, "\trm -f lib3*-%s.*\n", testcase_name); - fprintf (make_file, "\trm -f lib4*-%s.*\n", testcase_name); - fprintf (make_file, "\trm -f lib5*-%s.*\n", testcase_name); - fprintf (make_file, "\trm -f lib6*-%s.*\n", testcase_name); - fprintf (make_file, "\trm -f lib7*-%s.*\n", testcase_name); - fprintf (make_file, "\trm -f lib8*-%s.*\n", testcase_name); - fprintf (make_file, "\trm -f lib9*-%s.*\n", testcase_name); - fprintf (make_file, "\trm -f %s %s %s %s.c\n", argv[0], testcase_name, linkfile_name, testcase_name); - fprintf (make_file, "\n"); - fclose (make_file); - } - - /* Generate the code for the libraries. - */ - for (i=0; i < lib_num; i++) { - - /* Generate the names for the library. - */ - sprintf (file_name, "lib%2.2d-%s.c", i, testcase_name); - sprintf (file_name_core, "lib%2.2d-%s", i, testcase_name); - - /* Generate the source code. - */ - lib_file = fopen (file_name, "w"); - fprintf (lib_file, "/* Shared library file number %d */\n", i); - fprintf (lib_file, "#include \n\n"); - fprintf (lib_file, "/* The following variables largely exist to bloat this library's debug info. */\n"); - fprintf (lib_file, "static char c_static_buf_%d [100];\n", i); - for (i2=0; i2\n\n"); - - for (i = 0; i < lib_num; i++) { - fprintf (main_file, "extern int r_%d();\n", i); - } - - fprintf (main_file, "\n"); - fprintf (main_file, "int main()\n"); - fprintf (main_file, "{\n"); - fprintf (main_file, " int accum;\n"); - fprintf (main_file, " int lib_num = %d;\n", lib_num); - - for (i = 0; i < lib_num; i++) { - fprintf (main_file, " accum += r_%d();\n", i); - } - - fprintf (main_file, " printf( \"Final value: %%d, should be %%d\\n\", accum, lib_num );\n\n"); - fprintf (main_file, " return 0;\n"); - fprintf (main_file, "}\n\n"); - fprintf (main_file, "/* end of generated file */\n"); - fclose (main_file); - - /* Finish up the link file and the build file - */ - fclose (link_file); -} - -/* End of file */ diff --git a/gdb/testsuite/gdb.hp/gdb.base-hp/hwwatchbus.c b/gdb/testsuite/gdb.hp/gdb.base-hp/hwwatchbus.c deleted file mode 100644 index 833d027fc8..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.base-hp/hwwatchbus.c +++ /dev/null @@ -1,9 +0,0 @@ -/* This program raises a SIGBUS signal on HP-UX when the - pointer "bogus_p" is dereferenced. - */ -int * bogus_p = (int *)3; - -int main() -{ - *bogus_p = 0xdeadbeef; -} diff --git a/gdb/testsuite/gdb.hp/gdb.base-hp/hwwatchbus.exp b/gdb/testsuite/gdb.hp/gdb.base-hp/hwwatchbus.exp deleted file mode 100644 index 4654ec4850..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.base-hp/hwwatchbus.exp +++ /dev/null @@ -1,74 +0,0 @@ -# Copyright (C) 1997-2015 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . */ - - -if { [skip_hp_tests] } then { continue } - -if { ![istarget "hppa*-*-hpux11.*"] } { - verbose "HPUX h/w watch test ignored for non-hppa or pre-HP/UX-10.30 targets." - return 0 -} - -set testfile "hwwatchbus" -set srcfile ${testfile}.c -set binfile ${objdir}/${subdir}/${testfile} - -# build the first test case -if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } { - untested hwwatchbus.exp - return -1 -} - -if [get_compiler_info] { - return -1 -} - -# Start with a fresh gdb - -gdb_exit -remote_exec build "rm -f ${binfile}.bak" -gdb_start -gdb_reinitialize_dir $srcdir/$subdir -gdb_load ${binfile} - - -# We ought to be able to set a hardware watchpoint, step, and -# get a SIGBUS or SIGSEGV signal reported. -# -if ![runto_main] then { - fail "can't run to main" - return 0 -} - -send_gdb "watch bogus_p\n" -gdb_expect { - -re "Hardware watchpoint \[0-9\]*: bogus_p.*$gdb_prompt $"\ - {pass "set h/w watchpoint"} - -re "$gdb_prompt $"\ - {fail "set h/w watchpoint"} - timeout {fail "(timeout) set h/w watchpoint"} -} - -send_gdb "step\n" -gdb_expect { - -re "Program received signal (SIGBUS|SIGSEGV), (Bus error|Segmentation fault).* in main .*${srcfile}:8.*$gdb_prompt $"\ - {pass "see real signal when h/w watchpoint set"} - -re "$gdb_prompt $"\ - {fail "see real signal when h/w watchpoint set"} - timeout {fail "(timeout) see real signal when h/w watchpoint set"} -} - -remote_exec build "mv ${binfile} ${binfile}.bak" -return 0 diff --git a/gdb/testsuite/gdb.hp/gdb.base-hp/pxdb.c b/gdb/testsuite/gdb.hp/gdb.base-hp/pxdb.c deleted file mode 100644 index 31046b5454..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.base-hp/pxdb.c +++ /dev/null @@ -1,37 +0,0 @@ -#include - -#ifdef PROTOTYPES -int callee (int x) -#else -int callee( x ) -int x; -#endif -{ - int y = x * x; - return (y - 2); -} - -int main() -{ - int i; - for (i = 1; i < 10; i++) - { - printf( "%d ", callee( i )); - - } - printf( " Goodbye!\n" ); - return 0; -} -/* This routine exists only for aCC. The way we compile this test is - that we use aCC for the actual compile into the object file but then - use ld directly for the link. When we do this, we get an undefined - symbol _main(). Therefore, for aCC, we have this routine in here and - ld is happy. */ - -#ifdef __cplusplus -extern "C" { -void _main() -{ -} -} -#endif diff --git a/gdb/testsuite/gdb.hp/gdb.base-hp/pxdb.exp b/gdb/testsuite/gdb.hp/gdb.base-hp/pxdb.exp deleted file mode 100644 index dca90704bd..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.base-hp/pxdb.exp +++ /dev/null @@ -1,119 +0,0 @@ -# Copyright (C) 1998-2015 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - - -# This file is part of the gdb testsuite - - -# pxdb.exp Test that gdb calls pxdb on an application -# built without it. -# - -if { [skip_hp_tests] } then { continue } - -set testfile pxdb -set srcfile ${testfile}.c -set objfile ${objdir}/${subdir}/${testfile}.o -set binfile ${objdir}/${subdir}/${testfile} - -if [get_compiler_info "c++"] { - return -1 -} - -if { $gcc_compiled } then { continue } - -# To build a non-pxdb-ed file, use -# -# -# export LD_PXDB /dev/null -# ld -o hello_no_pxdb hello.o /opt/langtools/lib/end.o /usr/ccs/lib/crt0.o -lc -# - -if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${objfile}" object {debug}] != "" } { - untested pxdb.exp - return -1 -} - -# -# use this to debug: -#log_user 1 - - -# Following should get the error message: -# -# ld: (Warning) Can't exec pxdb using path: /dev/null -# -#execute_anywhere "ksh -c \"export LD_PXDB=/dev/null\"" - -if [istarget "hppa64-*-*"] { -set cmdline "ksh -c \"LD_PXDB=/dev/null ld -o ${binfile} ${objfile} /opt/langtools/lib/pa20_64/crt0.o /opt/langtools/lib/pa20_64/end.o -lc\"" -} else { -set cmdline "ksh -c \"LD_PXDB=/dev/null ld -o ${binfile} ${objfile} /usr/ccs/lib/crt0.o /opt/langtools/lib/end.o -lc\"" -} - -remote_exec build "rm ${binfile}" -remote_exec build $cmdline - -gdb_exit -gdb_start -gdb_reinitialize_dir $srcdir/$subdir - -# We expect to see this: -# -# "warning: File not processed by pxdb--about to process now. -# " -# ". -# "Procedures: 7 -# "Files: 2 -# "Reading symbols from ~/c_code.dir/hello_no_pxdb...done. -# "(gdb) -# -send_gdb "file ${binfile}\n" -gdb_expect { - - -re ".*warning: File not processed by pxdb.*Procedures: \[0-9\]+.*$gdb_prompt $"\ - { pass "PXDB call" } - - -re "$gdb_prompt $" { - if [istarget hppa*-*-hpux*] { - pass "Didn't call pxdb" - } else { - fail "Didn't call pxdb" - } - } - - -re ".*$gdb_prompt $" { fail "Some other message" } - - timeout { fail "call pxdb (timeout)" } -} - -# Make sure the new data makes sense -# -if { ![runto callee] } then { return } - -send_gdb "print x\n" -gdb_expect { - -re ".*= 1.*$gdb_prompt $" { pass "Good data after pxdb call" } - -re ".*$gdb_prompt $" { fail "No data after pxdb call" } - timeout { fail "(timeout)" } -} - -gdb_exit -return 0 - - - - - diff --git a/gdb/testsuite/gdb.hp/gdb.base-hp/reg-pa64.exp b/gdb/testsuite/gdb.hp/gdb.base-hp/reg-pa64.exp deleted file mode 100644 index 600a880028..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.base-hp/reg-pa64.exp +++ /dev/null @@ -1,182 +0,0 @@ -# Tests of wide register displays for GDB on HPPA 2.0 machines -# Copyright 1994-2015 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . */ - -# use this to debug: -#log_user 1 - -if { [skip_hp_tests] } { continue } - -if ![istarget "hppa*-*-*"] { - verbose "Wide register test ignored for non-hppa targets." - return 0 -} - -if ![istarget "hppa64-hp-hpux*"] { - verbose "reg-pa64.exp is only for PA2.0W (aka PA64)." - return 0 -} - -set testfile "reg-pa64" -set srcfile ${testfile}.s -set binfile ${objdir}/${subdir}/${testfile} - -# To build a pa 2.0 executable -# -# as +DA2.0W -o reg-pa64 reg-pa64.s -# or -# cc +DA2.0W -g -o reg-pa64 reg-pa64.s -# -# Don't reject if there are warnings, as we expect this warning: -# -# (Warning) At least one PA 2.0 object file (pa2.0_test2.o) was detected. -# The linked output may not run on a PA 1.x system. -# - -if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } { - untested reg-pa64.exp - return -1 -} - -gdb_exit -gdb_start -gdb_reinitialize_dir $srcdir/$subdir -gdb_load ${binfile} - -# test machine--there's no 2.0n architecture, so we have -# to try to run the app. -# -gdb_test "break main" "Breakpoint.*" "initial set-up" - -send_gdb "run\n" -gdb_expect { - -re ".*Executable file incompatible with hardware.*$gdb_prompt $" { - # Not hppa2.0 machine - # - return 0 - } - -re "Cannot exec.*$gdb_prompt $" { - # Not hppa2.0 machine - # - return 0 - } - -re ".*Starting program:.*$gdb_prompt $" { - pass "Ready to start test" - } - timeout { - fail "initial set-up, part 2 (timeout)" - return 0 - } -} - -# Let the program set known values. This secretly deletes -# the breakpoint at main and re-runs to mainend. -# -runto mainend - -# Look for known values -# -gdb_test "info reg r1" "r1 1" -gdb_test "info reg r4" "r4 2" -gdb_test "info reg r5" "r5 4" -gdb_test "info reg r6" "r6 8" -gdb_test "info reg r7" "r7 10" -gdb_test "info reg r8" "r8 20" -gdb_test "info reg r9" "r9 40" -gdb_test "info reg r10" "r10 80" -gdb_test "info reg r11" "r11 100" -gdb_test "info reg r12" "r12 200" -gdb_test "info reg r13" "r13 400" -gdb_test "info reg r14" "r14 800" -gdb_test "info reg r15" "r15 1000" -gdb_test "info reg r16" "r16 2000" - -# Two odd variants that GDB supports are: -# "1" means "r1", and -# "$1" means "r1" -# -gdb_test "info reg 1 4" "r1 1.*r4 2" -gdb_test "info reg \$1" "r1 1" - -# Verify that GDB responds gracefully to a register ID number that -# is out of range. -# -gdb_test "info reg 999" "999: invalid register" - -# Make sure the floating point status and error registers -# don't show up as floating point numbers! -# -gdb_test "info reg fpsr" ".*fpsr 0.*" "fpsr" -gdb_test "info reg fpe1" ".*fpe1 .*" "fpe1" -gdb_test "info reg fpe2" ".*fpe2 .*" "fpe2" -gdb_test "info reg fpe3" ".*fpe3 .*" "fpe3" -#DTS CLLbs16708 -#info reg should recognize fpe4..fpe7. -setup_xfail hppa64-hp-hpux* CLLbs16708 -gdb_test "info reg fpe4" ".*fpe4 .*" "fpe4" -setup_xfail hppa64-hp-hpux* CLLbs16708 -gdb_test "info reg fpe5" ".*fpe5 .*" "fpe5" -setup_xfail hppa64-hp-hpux* CLLbs16708 -gdb_test "info reg fpe6" ".*fpe6 .*" "fpe6" -setup_xfail hppa64-hp-hpux* CLLbs16708 -gdb_test "info reg fpe7" ".*fpe7 .*" "fpe7" - -gdb_test "info reg fr4" ".*fr4.*(double precision).* 1.*" -gdb_test "info reg fr5" ".*fr5.*(double precision).* 2.*" -gdb_test "info reg fr6" ".*fr6.*(double precision).* 2.*" -gdb_test "info reg fr7" ".*fr7.*(double precision).* 4.*" -gdb_test "info reg fr8" ".*fr8.*(double precision).* 8.*" -gdb_test "info reg fr9" ".*fr9.*(double precision).* 32.*" -gdb_test "info reg fr10" ".*fr10.*(double precision).* 256.*" - -gdb_test "info reg r19" "r19 deadbeefbadcadee" - -# Need to add test of use of $ -# -# Q: How do you say a literal "$" in expect? -# A: You say "\$". A literal "\" is "\\". -# -# Please note that this test will fail as long as we are running -# in 32-bit mode: it will produce "$1 = 0xbadcadee". To fix it -# would require building a real 64-bit gdb (expression evaluation, -# in particular). -# -send_gdb "p/x \$r19\n" -gdb_expect { - -re ".*= 0xdeadbeefbadcadee.*$gdb_prompt $" { - pass "64-bit works" - } - -re ".*= 0xbadcadee.*$gdb_prompt $" { - pass "32-bit extract when using PRINT; expected but not good" - } - -re ".*$gdb_prompt $" { - fail "didn't print any part of right value" - } - timeout { - fail "timeout on print" - } -} - -# Need to add tests of setting wide regs too. E.g. -# -# set $r4 = 0x1234567890123456 -# p/x $r4 -# - -# done -# -gdb_exit - -return 0 diff --git a/gdb/testsuite/gdb.hp/gdb.base-hp/reg-pa64.s b/gdb/testsuite/gdb.hp/gdb.base-hp/reg-pa64.s deleted file mode 100644 index 4c284d7958..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.base-hp/reg-pa64.s +++ /dev/null @@ -1,104 +0,0 @@ -; assemble as "as -o reg-pa64 reg-pa64.s" -; or -; cc -g -o +DA2.0W -; -; PA-RISC 2.0 register contents test. -; - .level 2.0W - - .code - .export main,ENTRY - .export mainend,CODE - .export lab1,CODE - .space $TEXT$ - .subspa $CODE$ -one - .align 8 - .stringz "?\xF0\x00\x00\x00\x00\x00\x00@\x00\x00\x00\x00\x00\x00" - -main - .proc - .callinfo NO_CALLS,FRAME=0 - .entry - - ;; Test we have right register numbers - ;; - ADD %r0,%r0,%r1 ; 0 - LDI 1,%r1 ; 1 - ;; - ;; Don't put anything into r2 or r3--they are special registers. - ;; - ADD %r1,%r1,%r4 ; 2 - ADD %r4,%r4,%r5 ; 4 - ADD %r5,%r5,%r6 ; 8 - ADD %r6,%r6,%r7 ; 16 - ADD %r7,%r7,%r8 ; 32 - ADD %r8,%r8,%r9 ; 64 - ADD %r9,%r9,%r10 ; 128 - ADD %r10,%r10,%r11 ; 256 - ADD %r11,%r11,%r12 ; 512 - ADD %r12,%r12,%r13 ; 1024 - ADD %r13,%r13,%r14 ; 2048 - ADD %r14,%r14,%r15 ; 4096 - ADD %r15,%r15,%r16 ; 9192 - - ;; Test high bits, to be sure we show them. - ;; - LDI 0xde,%r19 ; "de" - DEPD,Z %r19,55,56,%r19 ; "de00" - LDI 0xad,%r18 ; "ad" - ADD %r18,%r19,%r19 ; "dead" - DEPD,Z %r19,55,56,%r19 ; "dead00" - LDI 0xbe,%r18 ; "be" - ADD %r18,%r19,%r19 ; "deadbe" - DEPD,Z %r19,55,56,%r19 ; "deadbe00" - LDI 0xef,%r18 ; "ef" - ADD %r18,%r19,%r19 ; "deadbeef" - ; - DEPD,Z %r19,55,56,%r19 ; "deadbeef00" - LDI 0xba,%r18 ; "ba" - ADD %r18,%r19,%r19 ; "deadbeefba" - DEPD,Z %r19,55,56,%r19 ; "deadbeefba00" - LDI 0xdc,%r18 ; "dc" - ADD %r18,%r19,%r19 ; "deadbeefbadc" - DEPD,Z %r19,55,56,%r19 ; "deadbeefbadc00" - LDI 0xad,%r18 ; "ad" - ADD %r18,%r19,%r19 ; "deadbeefbadcad" - DEPD,Z %r19,55,56,%r19 ; "deadbeefbadcad00" - LDI 0xee,%r18 ; "ee" - ADD %r18,%r19,%r19 ; "deadbeefbadcadee" - -lab1 ;; Test floating point registers - ;; - ;; LDIL LR'one,%r22 ; - ;; FLDD RR'one(%r22),%fr4 ; 1.0 - ;; FLDD RR'one+8(%r22),%fr5 ; 2.0 - ;; FLDD RR'one+8(%r22),%fr6 ; 2.0 - B,L here,%r2 - NOP -here DEPDI 0x0,63,2,%r2 - LDO one-here(%r2),%r2 - FLDD 0(%r2),%fr4 - FLDD 8(%r2),%fr5 - FLDD 8(%r2),%fr6 - - FMPY,DBL %fr5,%fr6,%fr7 ; 4.0 - FMPY,DBL %fr6,%fr7,%fr8 ; 8.0 - FMPY,DBL %fr7,%fr8,%fr9 ; 32.0 - FMPY,DBL %fr8,%fr9,%fr10 ; 256.0 - - ;; The NOP prevents anything from end.o or crt0.o from - ;; being appended immediately after "mainend". If that - ;; happens, then we may have other labels that have the - ;; same address as "mainend", and thus the debugger - ;; may symbolize this PC to something other than "mainend". -mainend - NOP - .exit - .procend - - .space $TEXT$ - .subspa $CODE$ - .subspa $LIT$ ;; ,QUAD=0,ALIGN=8,ACCESS=0x2c,SORT=16 - .end - diff --git a/gdb/testsuite/gdb.hp/gdb.base-hp/reg.exp b/gdb/testsuite/gdb.hp/gdb.base-hp/reg.exp deleted file mode 100644 index fee046adef..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.base-hp/reg.exp +++ /dev/null @@ -1,230 +0,0 @@ -# This test script is part of GDB, the GNU debugger. - -# Copyright 1998-2015 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . */ - -# Tests of wide register displays for GDB on HPPA 2.0 machines - -# use this to debug: -#log_user 1 - -if { [skip_hp_tests] } then { continue } - -set testfile "reg" - -if [istarget "hppa64-hp-hpux*"] { - verbose "reg.exp is not for PA2.0W." - return 0 -} -set srcfile ${testfile}.s -set binfile ${objdir}/${subdir}/${testfile} - -# To build a pa 2.0 executable -# -# as -o reg reg.s -# or -# cc -g -o reg reg.s -# -# The +DA2.0N flag doesn't seem to be needed. -# -# Don't reject if there are warnings, as we expect this warning: -# -# (Warning) At least one PA 2.0 object file (pa2.0_test2.o) was detected. -# The linked output may not run on a PA 1.x system. -# - -if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } { - untested reg.exp - return -1 -} - -gdb_exit -gdb_start -gdb_reinitialize_dir $srcdir/$subdir -gdb_load ${binfile} - -# test machine--there's no 2.0n architecture, so we have -# to try to run the app. -# -send_gdb "break main\n" - gdb_expect { - -re "Breakpoint.*$gdb_prompt $" { - pass "initial set-up" - } - -re ".*$gdb_prompt $" { - fail "initial set-up" - } - timeout { - fail "initial set-up (timeout)" - } - } - -send_gdb "run\n" - gdb_expect { - -re ".*Executable file incompatible with hardware.*$gdb_prompt $" { - # Not hppa2.0 machine - # - return 0 - } - -re "Cannot exec.*$gdb_prompt $" { - # Not hppa2.0 machine - # - return 0 - } - -re ".*Starting program:.*$gdb_prompt $" { - pass "Ready to start test" - } - timeout { - fail "initial set-up, part 2 (timeout)" - return 0 - } - } - -# Let the program set known values. This secretly deletes -# the breakpoint at main and re-runs to mainend. -# -runto mainend - -# Look for known values -# -# The output format changed between gdb 6.1.1 and gdb HEAD 2004-06-01. -# -# gdb 6.1.1: -# (gdb) info reg r1 -# r1 1 -# -# gdb HEAD 2004-06-01: -# (gdb) info reg r1 -# r1 0x1 1 -# -# For now, I accept both formats. In the future, you can remove -# the old gdb 6.1.1 format. -# -# -- chastain 2004-06-26 - -set ws "\[\r\n\t \]+" - -proc hp_integer_reg {regname vhex vdec} { - global ws - set value_611 "$regname${ws}$vhex" - set value_new "$regname${ws}0x$vhex${ws}$vdec" - gdb_test "info reg $regname" "$value_611|$value_new" -} - -hp_integer_reg "r1" "1" "1" -hp_integer_reg "r4" "2" "2" -hp_integer_reg "r5" "4" "4" -hp_integer_reg "r6" "8" "8" -hp_integer_reg "r7" "10" "16" -hp_integer_reg "r8" "20" "32" -hp_integer_reg "r9" "40" "64" -hp_integer_reg "r10" "80" "128" -hp_integer_reg "r11" "100" "256" -hp_integer_reg "r12" "200" "512" -hp_integer_reg "r13" "400" "1024" -hp_integer_reg "r14" "800" "2048" -hp_integer_reg "r15" "1000" "4096" -hp_integer_reg "r16" "2000" "8192" - -# Two odd variants that GDB supports are: -# "1" means "r1", and -# "$1" means "r1" - -hp_integer_reg "1" "1" "1" -hp_integer_reg "4" "2" "2" - -set name "info reg \$1" -gdb_test_multiple "info reg \$1" "$name" { - -re "r1${ws}1\r\n$gdb_prompt $" { - pass "$name" - } - -re "r1${ws}0x1${ws}1\r\n$gdb_prompt $" { - pass "$name" - } -} - -# Verify that GDB responds gracefully to a register ID number that -# is out of range. - -gdb_test "info reg 999" "Invalid register.*999.*" - -# Make sure the floating point status and error registers -# don't show up as floating point numbers! - -hp_integer_reg "fpsr" "0" "0" -hp_integer_reg "fpe1" "0" "0" -hp_integer_reg "fpe2" "0" "0" -hp_integer_reg "fpe3" "0" "0" -hp_integer_reg "fpe4" "0" "0" -hp_integer_reg "fpe5" "0" "0" -hp_integer_reg "fpe6" "0" "0" -hp_integer_reg "fpe7" "0" "0" - -# Floating point registers. -# TODO: these are old format only. - -gdb_test "info reg fr4" ".*fr4.*(double precision).* 1" -gdb_test "info reg fr5" ".*fr5.*(double precision).* 2" -gdb_test "info reg fr6" ".*fr6.*(double precision).* 2" -gdb_test "info reg fr7" ".*fr7.*(double precision).* 4" -gdb_test "info reg fr8" ".*fr8.*(double precision).* 8" -gdb_test "info reg fr9" ".*fr9.*(double precision).* 32" -gdb_test "info reg fr10" ".*fr10.*(double precision).* 256" - -# An integer register with a 64-bit value. - -set name "info reg r19" -gdb_test_multiple "info reg r19" "$name" { - -re "r19${ws}deadbeefbadcadee\r\n$gdb_prompt $" { - # old gdb 6.1.1 format, good result - pass "$name" - } - -re "r19${ws}badcadee\r\n$gdb_prompt $" { - # old gdb 6.1.1 format, bad result - fail "$name (32-bit truncation)" - } - -re "r19${ws}0xdeadbeefbadcadee${ws}16045690984232431086\r\n$gdb_prompt $" { - # new gdb HEAD 2004-06-01 format, good result - pass "$name" - } - -re "r19${ws}0xbadcadee${ws}3135024622\r\n$gdb_prompt $" { - # new gdb HEAD 2004-06-01 format, 32 bit truncation - fail "$name (32-bit truncation)" - } -} - -set name "print /x \$r19" -gdb_test_multiple "print /x \$r19" "$name" { - -re "= 0xdeadbeefbadcadee\r\n$gdb_prompt $" { - pass "$name" - } - -re "= 0xbadcadee\r\n$gdb_prompt $" { - # this was a PASS in the last version so keep it PASS for now - # -- chastain 2004-06-26 - pass "$name (32-bit truncation)" - } -} - -# Need to add tests of setting wide regs too. E.g. -# -# set $r4 = 0x1234567890123456 -# p/x $r4 -# - -# done -# -gdb_exit - -return 0 diff --git a/gdb/testsuite/gdb.hp/gdb.base-hp/reg.s b/gdb/testsuite/gdb.hp/gdb.base-hp/reg.s deleted file mode 100644 index 8cc15f8f6e..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.base-hp/reg.s +++ /dev/null @@ -1,96 +0,0 @@ -; assemble as "as -o reg reg.s" -; or -; cc -g -o +DA2.0N -; -; PA-RISC 2.0 register contents test. -; - .level 2.0 - - .code - .export main,ENTRY - .export mainend,CODE - .export lab1,CODE - .space $TEXT$ - .subspa $CODE$ - -main - .proc - .callinfo NO_CALLS,FRAME=0 - .entry - - ;; Test we have right register numbers - ;; - ADD %r0,%r0,%r1 ; 0 - LDI 1,%r1 ; 1 - ;; - ;; Don't put anything into r2 or r3--they are special registers. - ;; - ADD %r1,%r1,%r4 ; 2 - ADD %r4,%r4,%r5 ; 4 - ADD %r5,%r5,%r6 ; 8 - ADD %r6,%r6,%r7 ; 16 - ADD %r7,%r7,%r8 ; 32 - ADD %r8,%r8,%r9 ; 64 - ADD %r9,%r9,%r10 ; 128 - ADD %r10,%r10,%r11 ; 256 - ADD %r11,%r11,%r12 ; 512 - ADD %r12,%r12,%r13 ; 1024 - ADD %r13,%r13,%r14 ; 2048 - ADD %r14,%r14,%r15 ; 4096 - ADD %r15,%r15,%r16 ; 9192 - - ;; Test high bits, to be sure we show them. - ;; - LDI 0xde,%r19 ; "de" - DEPD,Z %r19,55,56,%r19 ; "de00" - LDI 0xad,%r18 ; "ad" - ADD %r18,%r19,%r19 ; "dead" - DEPD,Z %r19,55,56,%r19 ; "dead00" - LDI 0xbe,%r18 ; "be" - ADD %r18,%r19,%r19 ; "deadbe" - DEPD,Z %r19,55,56,%r19 ; "deadbe00" - LDI 0xef,%r18 ; "ef" - ADD %r18,%r19,%r19 ; "deadbeef" - ; - DEPD,Z %r19,55,56,%r19 ; "deadbeef00" - LDI 0xba,%r18 ; "ba" - ADD %r18,%r19,%r19 ; "deadbeefba" - DEPD,Z %r19,55,56,%r19 ; "deadbeefba00" - LDI 0xdc,%r18 ; "dc" - ADD %r18,%r19,%r19 ; "deadbeefbadc" - DEPD,Z %r19,55,56,%r19 ; "deadbeefbadc00" - LDI 0xad,%r18 ; "ad" - ADD %r18,%r19,%r19 ; "deadbeefbadcad" - DEPD,Z %r19,55,56,%r19 ; "deadbeefbadcad00" - LDI 0xee,%r18 ; "ee" - ADD %r18,%r19,%r19 ; "deadbeefbadcadee" - -lab1 ;; Test floating point registers - ;; - LDIL LR'one,%r22 ; - FLDD RR'one(%r22),%fr4 ; 1.0 - FLDD RR'one+8(%r22),%fr5 ; 2.0 - FLDD RR'one+8(%r22),%fr6 ; 2.0 - FMPY,DBL %fr5,%fr6,%fr7 ; 4.0 - FMPY,DBL %fr6,%fr7,%fr8 ; 8.0 - FMPY,DBL %fr7,%fr8,%fr9 ; 32.0 - FMPY,DBL %fr8,%fr9,%fr10 ; 256.0 - - ;; The NOP prevents anything from end.o or crt0.o from - ;; being appended immediately after "mainend". If that - ;; happens, then we may have other labels that have the - ;; same address as "mainend", and thus the debugger - ;; may symbolize this PC to something other than "mainend". -mainend - NOP - .exit - .procend - - .space $TEXT$ - .subspa $CODE$ - .subspa $LIT$ ;; ,QUAD=0,ALIGN=8,ACCESS=0x2c,SORT=16 -one - .align 8 - .stringz "?\xF0\x00\x00\x00\x00\x00\x00@\x00\x00\x00\x00\x00\x00" - .end - diff --git a/gdb/testsuite/gdb.hp/gdb.base-hp/sized-enum.c b/gdb/testsuite/gdb.hp/gdb.base-hp/sized-enum.c deleted file mode 100644 index a6d57881f4..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.base-hp/sized-enum.c +++ /dev/null @@ -1,43 +0,0 @@ - -enum Normal { - red, - blue, - green -}; - -short enum Small { - pink, - cyan, - grey -}; - -char enum Tiny { - orange, - yellow, - brown -}; - - -main() -{ - enum Normal normal[3]; - short enum Small small[3]; - char enum Tiny tiny[3]; - int i; - - for (i=0; i < 3; i++) - { - normal[i] = (enum Normal) i; - small[i] = (short enum Small) i; - tiny[i] = (char enum Tiny) i; - } - normal[0] = 0; /* place to hang a breakpoint */ -} - - - - - - - - diff --git a/gdb/testsuite/gdb.hp/gdb.base-hp/sized-enum.exp b/gdb/testsuite/gdb.hp/gdb.base-hp/sized-enum.exp deleted file mode 100644 index 061ac649bb..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.base-hp/sized-enum.exp +++ /dev/null @@ -1,156 +0,0 @@ -# Copyright (C) 1997-2015 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . */ - -# GDB tests for sized enumerations - -# This is aimed at HP-UX systems. The HP C compiler -# allows specifying "char" or "short" for an enum, to -# indicate that it is 1 or 2 bytes long. - -# This file was written by Satish Pai -# 1997-09-24 - -# -# test running programs -# - -if { [skip_hp_tests] } then { continue } - -set testfile "sized-enum" -set srcfile ${testfile}.c -set binfile ${objdir}/${subdir}/${testfile} - -if [get_compiler_info] { - return -1 -} - -if { $gcc_compiled } then { continue } -if {$hp_aCC_compiler} {continue} - -if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } { - untested sized-enum.exp - return -1 -} - -gdb_exit -gdb_start -gdb_reinitialize_dir $srcdir/$subdir -gdb_load ${binfile} - -# -# set it up at a breakpoint so we can play with the variable values -# - -if ![runto_main] then { - perror "couldn't run to breakpoint" - continue -} - -# set a breakpoint and go there -send_gdb "break 34\n" -gdb_expect { - -re "Breakpoint.*line 34.*$gdb_prompt $" { pass "set break 34" } - -re "$gdb_prompt $" { fail "set break 34" } - timeout { fail "(timeout) set break 34" } -} -send_gdb "continue\n" -gdb_expect { - -re "Continuing\\.\r\n\r\nBreakpoint \[0-9\]*, main....at.*sized-enum\\.c:34\r\n34.*\r\n$gdb_prompt $" { pass "continue" } - -re "$gdb_prompt $" { fail "continue" } - timeout { fail "(timeout) continue" } -} - -# print stuff -send_gdb "print normal\n" -gdb_expect { - -re "\\$\[0-9\]* = \\{red, blue, green\\}.*$gdb_prompt $" { pass "print normal" } - -re "$gdb_prompt $" { fail "print normal" } - timeout { fail "(timeout) print normal" } -} -send_gdb "print small\n" -gdb_expect { - -re "\\$\[0-9\]* = \\{pink, cyan, grey\\}.*$gdb_prompt $" { pass "print small" } - -re "$gdb_prompt $" { fail "print small" } - timeout { fail "(timeout) print small" } -} -send_gdb "print tiny\n" -gdb_expect { - -re "\\$\[0-9\]* = \\{orange, yellow, brown\\}.*$gdb_prompt $" { pass "print tiny" } - -re "$gdb_prompt $" { fail "print tiny" } - timeout { fail "(timeout) print tiny" } -} - -# print type sizes -send_gdb "print sizeof (Normal)\n" -gdb_expect { - -re "\\$\[0-9\]* = 4.*$gdb_prompt $" { pass "print sizeof (Normal)" } - -re "$gdb_prompt $" { fail "print sizeof (Normal)" } - timeout { fail "(timeout) print sizeof (Normal)" } -} -send_gdb "print sizeof (Small)\n" -gdb_expect { - -re "\\$\[0-9\]* = 2.*$gdb_prompt $" { pass "print sizeof (Small)" } - -re "$gdb_prompt $" { fail "print sizeof (Small)" } - timeout { fail "(timeout) print sizeof (Small)" } -} -send_gdb "print sizeof (Tiny)\n" -gdb_expect { - -re "\\$\[0-9\]* = 1.*$gdb_prompt $" { pass "print sizeof (Tiny)" } - -re "$gdb_prompt $" { fail "print sizeof (Tiny)" } - timeout { fail "(timeout) print sizeof (Tiny)" } -} - -# print types -send_gdb "ptype normal\n" -gdb_expect { - -re "type = enum Normal \\{red, blue, green\\} \\\[3\\\].*$gdb_prompt $" { pass "ptype normal" } - -re "$gdb_prompt $" { fail "ptype normal" } - timeout { fail "(timeout) ptype normal" } -} -send_gdb "ptype small\n" -gdb_expect { - -re "type = short enum Small \\{pink, cyan, grey\\} \\\[3\\\].*$gdb_prompt $" { pass "ptype small" } - -re "$gdb_prompt $" { fail "ptype small" } - timeout { fail "(timeout) ptype small" } -} -send_gdb "ptype tiny\n" -gdb_expect { - -re "type = char enum Tiny \\{orange, yellow, brown\\} \\\[3\\\].*$gdb_prompt $" { pass "ptype tiny" } - -re "$gdb_prompt $" { fail "ptype tiny" } - timeout { fail "(timeout) ptype tiny" } -} - -# convert to int -send_gdb "print (int) blue\n" -gdb_expect { - -re "\\$\[0-9\]* = 1.*$gdb_prompt $" { pass "print (int) blue" } - -re "$gdb_prompt $" { fail "print (int) blue" } - timeout { fail "(timeout) print (int) blue" } -} -send_gdb "print (int) cyan\n" -gdb_expect { - -re "\\$\[0-9\]* = 1.*$gdb_prompt $" { pass "print (int) cyan" } - -re "$gdb_prompt $" { fail "print (int) cyan" } - timeout { fail "(timeout) print (int) cyan" } -} -send_gdb "print (int) yellow\n" -gdb_expect { - -re "\\$\[0-9\]* = 1.*$gdb_prompt $" { pass "print (int) yellow" } - -re "$gdb_prompt $" { fail "print (int) yellow" } - timeout { fail "(timeout) print (int) yellow" } -} - - - diff --git a/gdb/testsuite/gdb.hp/gdb.base-hp/so-thresh.exp b/gdb/testsuite/gdb.hp/gdb.base-hp/so-thresh.exp deleted file mode 100644 index 117c7d82cf..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.base-hp/so-thresh.exp +++ /dev/null @@ -1,331 +0,0 @@ -# Copyright (C) 1997-2015 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . */ - - -if { [skip_hp_tests] } then { continue } - -set testfile "so-thresh" -set binfile ${objdir}/${subdir}/${testfile} - -if [get_compiler_info] { - return -1 -} - -# This testcase is relatively large, and therefore can take awhile to -# load. We'd best set the timeout to something suitable, or we may -# seem to fail... -# -set timeout 60 - -# Build procedure for this testcase: -# ${srcdir}/${subdir}/so-thresh.sh ${subdir} -# which calls, -# make -f ${srcdir}/${subdir}/so-thresh.mk -# which builds, -# genso-thresh (from genso-thresh.c) -# which generates, -# lib00-so-thresh.c -# lib01-so-thresh.c -# lib02-so-thresh.c -# so-thresh.lopt (link options file) -# lib0*-so-thresh.sl (from .c files above) -# so-thresh (from so-thresh.c) -# using lib0*-so-thresh.sl and so-thresh.lopt -# -# Since so-thresh.mk requires SRCDIR and OBJDIR macro definitions, -# and SRCDIR / OBJDIR could be in relative path format, we use -# so-thresh.sh script to pin down SRCDIR / OBJDIR (using $PWD/ prefix -# when detected relative path values for srcdir / objdir), before the -# 'cd $subdir' call (when this can be done in TCL here, we can call -# make directly instead). -# -# remote_exec build "sh -c \\\"cd ${objdir}/${subdir}\\; make -v -f ${srcdir}/${subdir}/${testfile}.mk clean require_shlibs all SRCDIR=${srcdir}/${subdir} OBJDIR=${objdir}/${subdir}\\\"" - -remote_exec build "${srcdir}/${subdir}/${testfile}.sh $subdir" - -# Only HP-UX (and any other platforms using SOM shared libraries, I -# guess) interprets the auto-solib-limit variable as a threshhold, -# rather than a boolean that strictly enables or disables automatic -# loading of shlib symbol tables. -# -# On HP-UX, it is the size threshhold (in megabytes) at which to -# stop auto loading of symbol tables. -# -if ![istarget "hppa*-hp-hpux*"] then { - setup_xfail "*-*-*" -} - -# Start with a fresh gdb -# -gdb_exit -gdb_start -gdb_reinitialize_dir $srcdir/$subdir -gdb_load ${binfile} - -# This is a test of gdb's ability on HP-UX to stop automatically -# loading symbols of shared libraries, when the total size of the -# debugger's symbol table reaches a specified threshhold. -# - -# On HP-UX, the help text for auto-solib-limit mentions that it -# serves as a threshhold. -# -send_gdb "help set auto-solib-limit\n" -gdb_expect { - -re "Set threshold .in Mb. for autoloading shared library symbols.* -When shared library autoloading is enabled, new libraries will be loaded.* -only until the total size of shared library symbols exceeds this.* -threshold in megabytes. Is ignored when using .sharedlibrary.*$gdb_prompt $"\ - {pass "help set auto-solib-limit"} - -re "$gdb_prompt $"\ - {fail "help set auto-solib-limit"} - timeout {fail "(timeout) help set auto-solib-limit"} -} - -# On HP-UX, the threshhold is by default set to 50, which means -# 50 megabytes. -# -send_gdb "show auto-solib-limit\n" -gdb_expect { - -re "Threshold .in Mb. for autoloading shared library symbols is $decimal.*$gdb_prompt $"\ - {pass "show auto-solib-limit "} - -re "$gdb_prompt $"\ - {fail "show auto-solib-limit "} - timeout {fail "(timeout) show auto-solib-limit "} -} - -send_gdb "set auto-solib-limit 1\n" -gdb_expect { - -re ".*$gdb_prompt $" - {pass "set auto-solib-limit to 1"} - -re ".*$gdb_prompt $" - {fail "set auto-solib-limit to 1"} - timeout {fail "(timeout) set auto-solib-limit to 1"} -} - - -# We have manually verified that our testcase exceeds 1 Mbytes -# of heap space in GDB to hold the symbols for the main program -# and all associated linked-against libraries. Thus, when we -# run to the program's main, and therefore notice all the linked- -# against shlibs, we expect to hit the threshhold. -# -# (Note that we're not using the expect [runto main] function here, -# 'cause we want to match on output from the run command. -# -send_gdb "break main\n" -gdb_expect { - -re "Breakpoint \[0-9\]* at.*$gdb_prompt $"\ - {pass "1 set break at main"} - -re "$gdb_prompt $"\ - {fail "1 set break at main"} - timeout {fail "(timeout) 1 set break at main"} -} - -send_gdb "run\n" -gdb_expect { - -re ".*warning. Symbols for some libraries have not been loaded, because.* -doing so would exceed the size threshold specified by auto-solib-limit.* -To manually load symbols, use the 'sharedlibrary' command.* -To raise the threshold, set auto-solib-limit to a larger value and rerun.* -the program.*$gdb_prompt $"\ - {pass "run to main hit auto-solib-limit threshold"} - -re "$gdb_prompt $"\ - {fail "run to main hit auto-solib-limit threshold"} - timeout {fail "(timeout) run to main hit auto-solib-limit threshold"} -} - -# Verify that "info share" mentions something about libraries whose -# symbols weren't loaded. -# -# We'll assume that at least the last two shlib's symbols weren't -# loaded. As a side-effect of matching this pattern, the text start -# address of the last one is captured in expect_out(1,string). -# (we'll need it for the 'add-symbol-file' command in a nonce...) -# -send_gdb "info sharedlibrary\n" -gdb_expect { - -re ".*lib01_$testfile.sl .*symbols not loaded.*0x\[0-9\]* (0x\[0-9a-fA-F\]*).*$gdb_prompt $"\ - { send_gdb "add-symbol-file lib02_$testfile.sl $expect_out(1,string)\n" - gdb_expect { - -re "add symbol table.*y or n.*$"\ - {send_gdb "y\n" - gdb_expect { - -re "$gdb_prompt $" {pass "add-symbol-file and info sharedlib"} - timeout {fail "(timeout) add-symbol-file and info sharedlib"} - }} - -re "$gdb_prompt $"\ - {fail "add-symbol-file and info sharedlib"} - timeout {fail "(timeout) add-symbol-file and info sharedlib"} - } - } - -re "$gdb_prompt $" { - setup_xfail hppa*-*-* CHFts24108 - fail "info sharedlibrary shows shlibs with unloaded symbols" - } - timeout {fail "(timeout) info sharedlibrary shows shlibs with unloaded symbols"} -} - -# Verify that we can manually load the symbol table of a library -# whose symbols weren't loaded. (We'll pick the last one.) -# - -# I moved this test inside the one above, because the expect_out array is not ok if the -# previous test has failed, and expect would error out (elz) -# -#send_gdb "add-symbol-file lib02_$testfile.sl $expect_out(1,string)\n" -#gdb_expect { -# -re "add symbol table.*y or n.*$"\ -# {send_gdb "y\n" -# gdb_expect { -# -re "$gdb_prompt $" {pass "add-symbol-file"} -# timeout {fail "(timeout) add-symbol-file"} -# }} -# -re "$gdb_prompt $"\ -# {fail "add-symbol-file"} -# timeout {fail "(timeout) add-symbol-file"} -#} - -# Verify that we can manually load the symbols for all libraries -# which weren't already loaded. -# -# Warning! On a machine with little free swap space, this may -# fail! -# -send_gdb "sharedlibrary\n" -gdb_expect { - -re "Reading symbols from.*done.*$gdb_prompt $"\ - {pass "sharedlibrary"} - -re "$gdb_prompt $" { - setup_xfail hppa*-*-* CHFts24108 - fail "sharedlibrary" - } - timeout {fail "(timeout) sharedlibrary"} -} - -# Rerun the program, this time verifying that we can set the -# threshhold high enough to avoid hitting it. -# -# It appears that gdb isn't freeing memory when rerunning, as one -# would expect. To avoid potentially hitting a virtual memory -# ceiling, start with a fresh gdb. -# -gdb_exit -gdb_start -gdb_reinitialize_dir $srcdir/$subdir -gdb_load ${binfile} - -send_gdb "break main\n" -gdb_expect { - -re "Breakpoint \[0-9\]* at.*$gdb_prompt $"\ - {pass "2 set break at main"} - -re "$gdb_prompt $"\ - {fail "2 set break at main"} - timeout {fail "(timeout) 2 set break at main"} -} - -send_gdb "set auto-solib-limit 9999\n" -gdb_expect { - -re "$gdb_prompt $"\ - {pass "set auto-solib-limit threshold to practical infinity"} - timeout {fail "(timeout) set auto-solib-limit threshold to practical infinity"} -} -send_gdb "run\n" -gdb_expect { - -re ".*warning. Symbols for some libraries have not been loaded, because.* -doing so would exceed the size threshold specified by auto-solib-limit.* -To manually load symbols, use the 'sharedlibrary' command.* -To raise the threshold, set auto-solib-limit to a larger value and rerun.* -the program.*$gdb_prompt $"\ - {fail "rerun threshold at practical infinity (still hit threshold)"} - -re "$gdb_prompt $"\ - {pass "rerun with threshold at practical infinity"} - timeout {fail "(timeout) rerun with threshold at practical infinity"} -} - -# Rerun the program, this time altogether disabling the auto loading -# feature. There should be no information at all about shared -# libraries now. -# -# ??rehrauer: Personally, I'd call that a bug, since it doesn't give -# you the ability to manually load single shlibs (you need the text -# start address that 'info share' normall gives you). On the other -# hand, one can easily choose to load them all... -# -# It appears that gdb isn't freeing memory when rerunning, as one -# would expect. To avoid potentially hitting a virtual memory -# ceiling, start with a fresh gdb. -# -gdb_exit -gdb_start -gdb_reinitialize_dir $srcdir/$subdir -gdb_load ${binfile} - -send_gdb "break main\n" -gdb_expect { - -re "Breakpoint \[0-9\]* at.*$gdb_prompt $"\ - {pass "3 set break at main"} - -re "$gdb_prompt $"\ - {fail "3 set break at main"} - timeout {fail "(timeout) 3 set break at main"} -} - -send_gdb "set auto-solib-limit 0\n" -gdb_expect { - -re "$gdb_prompt $"\ - {pass "set auto-solib-limit threshold to 0"} - timeout {fail "(timeout) set auto-solib-limit threshold to 0"} -} -send_gdb "run\n" -gdb_expect { - -re ".*warning. Symbols for some libraries have not been loaded, because.* -doing so would exceed the size threshold specified by auto-solib-limit.* -To manually load symbols, use the 'sharedlibrary' command.* -To raise the threshold, set auto-solib-limit to a larger value and rerun.* -the program.*$gdb_prompt $"\ - {fail "rerun threshold at 0 (still hit threshold)"} - -re "$gdb_prompt $"\ - {pass "rerun with threshold at 0"} - timeout {fail "(timeout) rerun with threshold at 0"} -} - -# Verify that we can still manually load symbols for all libraries. -# (We'll assume that if the last shlib's symbols are loaded, that -# all of them were.) -# -# Note that we set the GDB "height" variable to prevent GDB from -# prompting -# -# Warning! On a machine with little free swap space, this may -# fail! -# -send_gdb "set height 9999\n" -gdb_expect { - -re "$gdb_prompt $"\ - {pass "set screen page height to practical infinity"} - timeout {fail "(timeout) set screen page height to practical infinity"} -} -send_gdb "sharedlibrary\n" -gdb_expect { - -re ".*Reading symbols from .*/lib02-so-thresh\\.sl\\.\\.\\.done\\..*$gdb_prompt $"\ - {pass "manually load all symbols"} - -re "$gdb_prompt $" { - setup_xfail hppa*-*-* CHFts24108 - fail "manually load all symbols (CHFts24108)" - } - timeout {fail "(timeout) manually load all symbols"} -} - -return 0 diff --git a/gdb/testsuite/gdb.hp/gdb.base-hp/so-thresh.mk b/gdb/testsuite/gdb.hp/gdb.base-hp/so-thresh.mk deleted file mode 100644 index f71e9210c7..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.base-hp/so-thresh.mk +++ /dev/null @@ -1,74 +0,0 @@ -# Make file for so-thresh test - -OBJDIR=. -SRCDIR=. -CFLAGS = +DA1.1 -g -CC=cc - -# This is how to build this generator. -genso-thresh.o: ${SRCDIR}/genso-thresh.c - $(CC) $(CFLAGS) -o genso-thresh.o -c ${SRCDIR}/genso-thresh.c -genso-thresh: genso-thresh.o - $(CC) $(CFLAGS) -o genso-thresh genso-thresh.o - -# This is how to run this generator. -# This target should be made before the 'all' target, -# to ensure that the shlib sources are all available. -require_shlibs: genso-thresh - if ! [ -a lib00-so-thresh.c ] ; then \ - genso-thresh ; \ - fi - if ! [ -a lib01-so-thresh.c ] ; then \ - genso-thresh ; \ - fi - if ! [ -a lib02-so-thresh.c ] ; then \ - genso-thresh ; \ - fi - -# This is how to build all the shlibs. -# Be sure to first make the require_shlibs target! -lib00-so-thresh.o: lib00-so-thresh.c - $(CC) $(CFLAGS) +Z -o lib00-so-thresh.o -c lib00-so-thresh.c -lib00-so-thresh.sl: lib00-so-thresh.o - $(LD) $(LDFLAGS) -b -o lib00-so-thresh.sl lib00-so-thresh.o -lib01-so-thresh.o: lib01-so-thresh.c - $(CC) $(CFLAGS) +Z -o lib01-so-thresh.o -c lib01-so-thresh.c -lib01-so-thresh.sl: lib01-so-thresh.o - $(LD) $(LDFLAGS) -b -o lib01-so-thresh.sl lib01-so-thresh.o -lib02-so-thresh.o: lib02-so-thresh.c - $(CC) $(CFLAGS) +Z -o lib02-so-thresh.o -c lib02-so-thresh.c -lib02-so-thresh.sl: lib02-so-thresh.o - $(LD) $(LDFLAGS) -b -o lib02-so-thresh.sl lib02-so-thresh.o - - - - -# For convenience, here's names for all pieces of all shlibs. -SHLIB_SOURCES = \ - lib00-so-thresh.c \ - lib01-so-thresh.c \ - lib02-so-thresh.c - -SHLIB_OBJECTS = $(SHLIB_SOURCES:.c=.o) -SHLIBS = $(SHLIB_SOURCES:.c=.sl) -SHLIB_NAMES = $(SHLIB_SOURCES:.c=) -EXECUTABLES = $(SHLIBS) genso-thresh so-thresh -OBJECT_FILES = $(SHLIB_OBJECTS) genso-thresh.o so-thresh.o - -shlib_objects: $(SHLIB_OBJECTS) -shlibs: $(SHLIBS) - -# This is how to build the debuggable testcase that uses the shlibs. -so-thresh.o: so-thresh.c - $(CC) $(CFLAGS) -o so-thresh.o -c so-thresh.c -so-thresh: shlibs so-thresh.o - $(LD) $(LDFLAGS) -o so-thresh -lc -L${OBJDIR} -c so-thresh.lopt /opt/langtools/lib/end.o /lib/crt0.o so-thresh.o - -# Yeah, but you should first make the require_shlibs target! -all: so-thresh genso-thresh - -# To remove everything built via this makefile... -clean: - rm -f lib0*-so-thresh.* - rm -f *.o genso-thresh so-thresh.lopt so-thresh.c - rm -f so-thresh diff --git a/gdb/testsuite/gdb.hp/gdb.base-hp/so-thresh.sh b/gdb/testsuite/gdb.hp/gdb.base-hp/so-thresh.sh deleted file mode 100755 index 078e05a2e4..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.base-hp/so-thresh.sh +++ /dev/null @@ -1,34 +0,0 @@ -#!/bin/sh - -# so-thresh.sh -# -# This script is a "wrapper" to use the so-thresh.mk -# Makefile. See the comments in so-thresh.exp -# regarding why this script exists. - -#set -o xtrace -#set -o verbose - -if [ "$srcdir" = "${srcdir#/}" ] -then - srcdir="$PWD/$srcdir" -fi - -if [ "$objdir" = "${objdir#/}" ] -then - objdir="$PWD/$objdir" -fi - -subdir="$1" - -HERE=$PWD -cd $subdir - -MAKEFLAGS= -make -f ${srcdir}/${subdir}/so-thresh.mk clean require_shlibs all SRCDIR=${srcdir}/${subdir} OBJDIR=${objdir}/${subdir} > ${objdir}/${subdir}/so-thresh.make.out 2>&1 -STATUS=$? - -cd $HERE -echo "return STATUS is $STATUS" - -exit $STATUS diff --git a/gdb/testsuite/gdb.hp/gdb.compat/Makefile.in b/gdb/testsuite/gdb.hp/gdb.compat/Makefile.in deleted file mode 100644 index 10fc8fc478..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.compat/Makefile.in +++ /dev/null @@ -1,25 +0,0 @@ -VPATH = @srcdir@ -srcdir = @srcdir@ - -EXECUTABLES = xdb xdb-test - -all: - @echo "Nothing to be done for all..." - -info: -install-info: -dvi: -install: -uninstall: force -installcheck: -check: - -clean mostlyclean: - -rm -f *~ *.o *.ci - -rm -f *.dwo *.dwp - -rm -f core $(EXECUTABLES) - -distclean maintainer-clean realclean: clean - -rm -f Makefile config.status config.log - -rm -f *-init.exp - -rm -fr *.log summary detail *.plog *.sum *.psum site.* diff --git a/gdb/testsuite/gdb.hp/gdb.compat/average.c b/gdb/testsuite/gdb.hp/gdb.compat/average.c deleted file mode 100644 index 25ba2ee6a6..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.compat/average.c +++ /dev/null @@ -1,46 +0,0 @@ -/* This is a sample program for the HP WDB debugger. */ - -#include -#include - -#ifdef PROTOTYPES -extern int sum(int *, int, int); -#else -extern int sum(); -#endif - -#define num 10 - -static int my_list[num] = {3,4,2,0,2,1,8,3,6,7}; - -#ifdef __STDC__ -void print_average(int *list, int low, int high) -#else -void print_average(list, low, high) -int *list, low, high; -#endif - { - int total = 0, num_elements = 0, average = 0; - total = sum(list, low, high); - num_elements = high - low; /* note this is an off-by-one bug */ - - average = total / num_elements; - printf("%10.d\n", average); - } - -#ifdef __STDC__ -int main(void) -#else -main () -#endif -{ - char c; - int first = 0, last = 0; - last = num-1; - - /* Try two test cases. */ - print_average (my_list, first, last); - print_average (my_list, first, last - 3); - - exit(0); -} diff --git a/gdb/testsuite/gdb.hp/gdb.compat/sum.c b/gdb/testsuite/gdb.hp/gdb.compat/sum.c deleted file mode 100644 index d295f7e279..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.compat/sum.c +++ /dev/null @@ -1,15 +0,0 @@ -/* This is a sample program for the HP/DDE debugger. */ -#include - -#ifdef __STDC__ -int sum(int *list, int low, int high) -#else -int sum(list, low, high) -int *list, low, high; -#endif - { - int i = 0, s = 0; - for (i = low; i <= high; i++) - s += list[i]; - return(s); - } diff --git a/gdb/testsuite/gdb.hp/gdb.compat/xdb.c b/gdb/testsuite/gdb.hp/gdb.compat/xdb.c deleted file mode 100644 index e3e3fc23e9..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.compat/xdb.c +++ /dev/null @@ -1,20 +0,0 @@ -#include - -int callee( x ) -int x; -{ - int y = x * x; - return (y - 2); -} - -main() -{ - int i; - for (i = 1; i < 10; i++) - { - printf( "%d ", callee( i )); - - } - printf( " Goodbye!\n" ); - -} diff --git a/gdb/testsuite/gdb.hp/gdb.compat/xdb0.c b/gdb/testsuite/gdb.hp/gdb.compat/xdb0.c deleted file mode 100644 index 4cd29c381f..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.compat/xdb0.c +++ /dev/null @@ -1,39 +0,0 @@ -#include "xdb0.h" - -main () -{ - int x; - - x = 0; - foo (x++); - foo (x++); - foo (x++); - foo (x++); - foo (x++); - foo (x++); - foo (x++); - foo (x++); - foo (x++); - foo (x++); - foo (x++); - foo (x++); - foo (x++); - foo (x++); - foo (x++); - foo (x++); - foo (x++); - foo (x++); - foo (x++); - foo (x++); - foo (x++); - foo (x++); - foo (x++); - foo (x++); - foo (x++); -} - -static void -unused () -{ - /* Not used for anything */ -} diff --git a/gdb/testsuite/gdb.hp/gdb.compat/xdb0.h b/gdb/testsuite/gdb.hp/gdb.compat/xdb0.h deleted file mode 100644 index c4d337c677..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.compat/xdb0.h +++ /dev/null @@ -1,36 +0,0 @@ -/* An include file that actually causes code to be generated in the - including file. This is known to cause problems on some systems. */ - -static void -foo (x) -int x; -{ - bar (x++); - bar (x++); - bar (x++); - bar (x++); - bar (x++); - bar (x++); - bar (x++); - bar (x++); - bar (x++); - bar (x++); - bar (x++); - bar (x++); - bar (x++); - bar (x++); - bar (x++); - bar (x++); - bar (x++); - bar (x++); - bar (x++); - bar (x++); - bar (x++); - bar (x++); - bar (x++); - bar (x++); - bar (x++); - bar (x++); - bar (x++); - bar (x++); -} diff --git a/gdb/testsuite/gdb.hp/gdb.compat/xdb1.c b/gdb/testsuite/gdb.hp/gdb.compat/xdb1.c deleted file mode 100644 index 51632b94d0..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.compat/xdb1.c +++ /dev/null @@ -1,33 +0,0 @@ -void -bar (x) -int x; -{ - printf ("%d\n", x); - - long_line (); -} - -static void -unused () -{ - /* Not used for anything */ -} - - -/* This routine has a very long line that will break searching in older - versions of GDB. */ - -long_line () -{ - oof (67); - - oof (6789); - - oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* 5 */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* 10 */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* 15 */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* 20 */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* 25 */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* 30 */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* 35 */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* 40 */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* 45 */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* 50 */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* 55 */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* 60 */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* 65 */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (12); /* */ oof (12); oof (12); oof (12); oof (12); oof (12); oof (1234); /* 70 */ -} - -oof (n) - int n; -{ - return n + 1; -} diff --git a/gdb/testsuite/gdb.hp/gdb.compat/xdb1.exp b/gdb/testsuite/gdb.hp/gdb.compat/xdb1.exp deleted file mode 100644 index f0d5d9869f..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.compat/xdb1.exp +++ /dev/null @@ -1,67 +0,0 @@ -# Copyright (C) 1992-2015 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . */ - -# This file was written by Fred Fish. (fnf@cygnus.com) - -if { [skip_hp_tests] } then { continue } - -# -# test running programs -# - -set testfile "xdb" -set srcfile ${testfile}.c -set binfile ${objdir}/${subdir}/${testfile} -if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } { - untested xdb1.exp - return -1 -} - -if [get_compiler_info] { - return -1 -} -if { $gcc_compiled } then { continue } - -global GDBFLAGS -set saved_gdbflags $GDBFLAGS - -set GDBFLAGS "$GDBFLAGS --xdb" - -gdb_exit -gdb_start -gdb_reinitialize_dir $srcdir/$subdir -gdb_load ${binfile} - -gdb_test "set pagination off" "" -gdb_test "show pagination" "State of pagination is off." -gdb_test "set pagination on" "" -gdb_test "show pagination" "State of pagination is on." - -gdb_test "txbreak callee" "Breakpoint.*at.*" -gdb_test "info break" "Num.*Type.*Disp.*Enb.*Address.*What\r\n.*breakpoint.*del.*y.*" - -gdb_test "xbreak callee" "Breakpoint.*at.*.*" -gdb_test "info break" "Num.*Type.*Disp.*Enb.*Address.*What\r\n.*breakpoint.*keep.*y.*" - -gdb_exit -set GDBFLAGS $saved_gdbflags -return 0 - - - - - - - diff --git a/gdb/testsuite/gdb.hp/gdb.compat/xdb2.exp b/gdb/testsuite/gdb.hp/gdb.compat/xdb2.exp deleted file mode 100644 index 6a8754e450..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.compat/xdb2.exp +++ /dev/null @@ -1,95 +0,0 @@ -# Copyright (C) 1992-2015 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . */ - -# This file was written by Fred Fish. (fnf@cygnus.com) - -if { [skip_hp_tests] } then { continue } - -global message - -# -# test running programs -# - -set testfile "xdb" -set binfile ${objdir}/${subdir}/${testfile} - -if { [gdb_compile "${srcdir}/${subdir}/xdb0.c" "${binfile}0.o" object {debug}] != "" } { - perror "Couldn't compile ${testfile}0.c to object" - return -1 -} - -if { [gdb_compile "${srcdir}/${subdir}/xdb1.c" "${binfile}1.o" object {debug}] != "" } { - perror "Couldn't compile ${testfile}1.c to object" - return -1 -} - -if { [gdb_compile "${binfile}0.o ${binfile}1.o" ${binfile} executable {debug}] != "" } { - perror "Couldn't link ${testfile}." - return -1 -} - -if [get_compiler_info] { - return -1 -} - -if { $gcc_compiled } then { continue } - -global GDBFLAGS -set saved_gdbflags $GDBFLAGS -set GDBFLAGS "$GDBFLAGS --xdb" - -gdb_exit -gdb_start -gdb_reinitialize_dir $srcdir/$subdir -gdb_load ${binfile} -gdb_test "break main" "" -gdb_test "run" "" -gdb_test "go +2" "Breakpoint.*at.*file.*xdb0\.c, line 12\.\r\nContinuing at.*\r\nmain \\(\\) at.*xdb0\.c:12\r\n12\[ \t\]+foo \\(x\\+\\+\\);" -gdb_test "go -2" "Note: breakpoint.*also set at pc.*\.\r\nBreakpoint.*at.*file.*xdb0\.c, line 10\.\r\nContinuing at.*\.\r\n\r\nBreakpoint.*, main \\(\\) at.*xdb0\.c:10.*" -gdb_test "go 16" "Breakpoint.*at.*file.*xdb0\.c, line 16\.\r\nContinuing at.*\.\r\nmain \\(\\) at.*xdb0\.c:16\r\n16\[ \t\]+foo \\(x\\+\\+\\);" - -send_gdb "go bar\n" - gdb_expect { - -re ".*Line 5 is not in .main.. Jump anyway.*y or n. $" { - send_gdb "y\n" - gdb_expect { - -re "$gdb_prompt $"\ - {pass "go bar"} - timeout {fail "(timeout) go bar"} - } - } - -re "Continuing at.*\.\r\nbar \\(x=0\\) at.*xdb1\.c:5" {} - timeout { perror "(timeout) go bar" ; return } - } - -# Verify that GDB responds gracefully to a "go" command without -# an argument. -# -gdb_test "go" "Usage: go " - -gdb_exit -gdb_start -gdb_reinitialize_dir $srcdir/$subdir -gdb_load ${binfile} - -gdb_test "break bar" "" -gdb_test "run" "" -gdb_test "backtrace full" ".*bar \\(x=0\\) at.*xdb1\.c:5\r\nNo locals\.\r\n.1.* in foo \\(x=1\\) at.*xdb0\.h:8\r\nNo locals\.\r\n.2.* in main \\(\\) at.*xdb0\.c:11\r\n.*x = 1" -gdb_test "bt 1 full" ".*bar \\(x=0\\) at.*xdb1\.c:5\r\nNo locals\.\r\n\\(More stack frames follow\.\.\.\\)" -gdb_test "bt full 2" ".*bar \\(x=0\\) at.*xdb1\.c:5\r\nNo locals\.\r\n.1.* in foo \\(x=1\\) at.*xdb0\.h:8\r\nNo locals\.\r\n\\(More stack frames follow\.\.\.\\)" - -set GDBFLAGS $saved_gdbflags -return 0 diff --git a/gdb/testsuite/gdb.hp/gdb.compat/xdb3.exp b/gdb/testsuite/gdb.hp/gdb.compat/xdb3.exp deleted file mode 100644 index 6a898b3d39..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.compat/xdb3.exp +++ /dev/null @@ -1,316 +0,0 @@ -# Copyright (C) 1998-2015 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . */ - - -if { [skip_hp_tests] } then { continue } - -set testfile1 "average" -set testfile2 "sum" -set testfile "xdb-test" -set binfile1 ${objdir}/${subdir}/${testfile1} -set binfile2 ${objdir}/${subdir}/${testfile2} -set binfile ${objdir}/${subdir}/${testfile} - -if { [gdb_compile "${srcdir}/${subdir}/average.c" "${binfile1}.o" object {debug}] != "" } { - untested xdb3.exp - return -1 -} - -if { [gdb_compile "${srcdir}/${subdir}/sum.c" "${binfile2}.o" object {debug}] != "" } { - untested xdb3.exp - return -1 -} - -if { [gdb_compile "${binfile1}.o ${binfile2}.o" ${binfile} executable {debug}] != "" } { - untested xdb3.exp - return -1 -} - -if [get_compiler_info] { - return -1 -} -if { $gcc_compiled } then { continue } - - -proc xdb_reinitialize_dir { subdir } { - global gdb_prompt - - send_gdb "D\n" - gdb_expect { - -re "Reinitialize source path to empty.*y or n. " { - send_gdb "y\n" - gdb_expect { - -re "Source directories searched.*$gdb_prompt $" { - send_gdb "D $subdir\n" - gdb_expect { - -re "Source directories searched.*$gdb_prompt $" { - verbose "Dir set to $subdir" - } - -re ".*$gdb_prompt $" { - perror "Dir \"$subdir\" failed." - } - } - } - -re ".*$gdb_prompt $" { - perror "Dir \"$subdir\" failed." - } - } - } - -re ".*$gdb_prompt $" { - perror "Dir \"$subdir\" failed." - } - } -} - -# -#test_search -# -proc test_search { } { - gdb_test "set listsize 4" "" - gdb_test "list average.c:1" "1\[ \t\]+/. This is a sample .*" - gdb_test "/ print_average" "17\[ \t\]+void print_average\\(int \\*list.*" - gdb_test "/ print_average" "19\[ \t\]+void print_average\\(list, low, high\\)" - gdb_test "/ print_average" "42\[ \t\]+print_average \\(my_list, first, last\\);" - gdb_test "? print_average" "19\[ \t\]+void print_average\\(list, low, high\\)" - gdb_test "? sum" "9\[ \t]+extern int sum\\(\\);" -} - -# -#test_viewing_loc -# -proc test_viewing_loc { } { - gdb_test "L" "No stack." - gdb_test "break main" "" - gdb_test "R" "" - gdb_test "L" "#0\[ \t\]+main \\(\\) at.*average.c:38\r\n38\[ \t\]+int first = 0, last = 0;" -} - -# -#test_dir_list -# -proc test_dir_list { } { - gdb_test "ld" "Source directories searched: .*" -} - -# -#test_list_sources -# -proc test_list_sources { } { - if [istarget "hppa64-*-*"] { - gdb_test "lf" "Source files for which symbols have been read in:\r\n\r\n.*average\\.c.*Source files for which symbols will be read in on demand:\r\n\r\nglobals,.*\[se\]\[un\]\[md\]\\.c.*\[se\]\[un\]\[md\]\\.c" - } else { - gdb_test "lf" "Source files for which symbols have been read in:\r\n\r\n.*average\\.c.*\r\n\r\nSource files for which symbols will be read in on demand:\r\n\r\nglobals, end\\.c,.*sum\\.c" - } -} -# -#test_vlist -# -proc test_vlist { } { - gdb_test "v main" "34\[ \t\]+main \\(\\)\r\n35\[ \t\]+#endif\r\n36\[ \t\]+.\r\n37\[ \t\]+char c;" -} - -# -#test_va -# -proc test_va { } { - if [istarget "hppa64-*-*"] { - gdb_test "va main" "Dump of assembler code for function main:\r\n.*0x.*
:\[ \t\]+std %rp,-0x10\\(%sp\\)\r\n0x.* :\[ \t\]+std,ma %r3,0xd0\\(%sp\\)\r\n.*0x.* :\[ \t\]+std %r4,-0xc8\\(%sp\\)\r\n.*0x.* :\[ \t\]+copy %ret1,%r3\r\n.*" - } else { - gdb_test "va main" "Dump of assembler code for function main:\r\n.*0x.*
:\[ \t\]+stw %rp,-0x14\\(%sr0,%sp\\)\r\n0x.* :\[ \t\]+ldo 0x\[48\]0\\(%sp\\),%sp\r\n.*0x.* :\[ \t\]+stw %r0,-0x.*\\(%sr0,%sp\\)\r\n.*0x.* :\[ \t\]+stw %r0,-0x.*\\(%sr0,%sp\\)\r\n.*" - } -} - -# -#test_list_globals -# -proc test_list_globals { } { - gdb_test "lg" "All defined variables:\r\n\r\nFile globals:.*" -# gdb_test "lg" "All defined variables:\r\n\r\nFile globals:\r\nchar __buffer.512.;\r\nint __d_eh_catch_catch;\r\nint __d_eh_catch_throw;.*" -} - -# -#test_list_registers -# -proc test_list_registers { } { - if [istarget "hppa64-*-*"] { - gdb_test "lr" "\[ \t\]+flags:.*r17:.*pcsqh:.*cr0:.*\r\n\[ \t\]+r1:.*r18:.*pcoqt:.*cr8:.*" - } else { - gdb_test "lr" "\[ \t\]+flags:.*r18:.*pcsqt:.*ccr:.*\r\n\[ \t\]+r1:.*r19:.*eiem:.*cr12:.*" - } - gdb_test "lr r1" "r1 .*" -} - -# -#test_backtrace -# -proc test_backtrace { } { - gdb_test "t" "#0 main \\(\\) at.*average.c:39" - gdb_test "T" "#0 main \\(\\) at.*average.c:39\r\n\[ \t\]+c = *.*\r\n\[ \t\]+first = 0\r\n\[ \t\]+last = 0" - - gdb_test "break sum" "" - gdb_test "cont" "" - gdb_test "next" - - gdb_test "t" "#0 sum \\(list=0x.*, low=0, high=9\\) at.*sum\.c:12\r\n#1 0x.* in print_average \\(list=0x.*, low=0, high=9\\) at.*average\.c:24\r\n#2 0x.* in main \\(\\) at.*average\.c:42" - gdb_test "t 1" "#0 sum \\(list=0x.*, low=0, high=9\\) at.*sum\.c:12\r\n\\(More stack frames follow\.\.\.\\)" - gdb_test "T" "#0 sum \\(list=0x.*, low=0, high=9\\) at.*sum\.c:12\r\n\[ \t\]+i = 0\r\n\[ \t\]+s = 0\r\n#1 0x.* in print_average \\(list=0x.*, low=0, high=9\\) at.*average\.c:24\r\n\[ \t\]+total = 0\r\n\[ \t\]+num_elements = 0\r\n\[ \t\]+average = 0\r\n#2 0x.* in main \\(\\) at.*average\.c:42\r\n\[ \t\]+c = *.*\r\n\[ \t\]+first = 0\r\n\[ \t\]+last = 9" - gdb_test "T 1" "#0 sum \\(list=0x.*, low=0, high=9\\) at.*sum\.c:12\r\n\[ \t\]+i = 0\r\n\[ \t\]+s = 0\r\n\\(More stack frames follow\.\.\.\\)" - - gdb_test "V" "#0 sum \\(list=0x.*, low=0, high=9\\) at.*sum\.c:12\r\n\\12\[ \t\]+for \\(i = low;.*\\)" - gdb_test "V 1" "#1 0x.* in print_average \\(list=0x.*, low=0, high=9\\) at.*average\.c:24\r\n24\[ \t\]+total = sum\\(list, low, high\\);" -} - -# -# test_go -# -proc test_go { } { - gdb_test "break main" "" - gdb_test "R" "" - - gdb_test "g +1" "Breakpoint.*at 0x.*: file.*average\.c, line 39\.\r\nContinuing at 0x.*\.\r\nmain \\(\\) at.*average\.c:39\r\n39\[ \t\]+last = num-1;" - gdb_test "g 42" "Breakpoint.*at 0x.*: file.*average\.c, line 42\.\r\nContinuing at 0x.*\.\r\nmain \\(\\) at.*average\.c:42\r\n42\[ \t\]+print_average \\(my_list, first, last\\);" - -} - -# -#test_breakpoints -# -proc test_breakpoints { } { - global gdb_prompt - - gdb_test "sb" "" - gdb_test "lb" "Num.*Type.*Disp.*Enb.*Address.*What\r\n1\[ \r\]+breakpoint\[ \r\]+keep n.*in main at.*average\.c:38.*" - gdb_test "ab" "" - gdb_test "lb" "Num.*Type.*Disp.*Enb.*Address.*What\r\n1\[ \r\]+breakpoint\[ \r\]+keep y.*in main at.*average\.c:38.*" - gdb_test "ba sum" "Breakpoint.*at.*: file.*sum\.c, line 11\." - gdb_test "cont" "" - gdb_test "bx" "Breakpoint.*at.*: file.*sum.c, line 15\." - #gdb_test "bx if (1)" "Breakpoint.*at.*: file.*sum.c, line 15\." - gdb_test "bx 1" "Breakpoint.*at.*: file.*average.c, line 29\." - gdb_test "bx 1 if (1)" "Breakpoint.*at.*: file.*average.c, line 29\." - gdb_test "bc 1 2" "Will ignore next 2 crossings of breakpoint 1\." - gdb_test "lb 1" "Num.*Type.*Disp.*Enb.*Address.*What\r\n1\[ \r\]+breakpoint\[ \r\]+keep y.*in main at.*average\.c:38\r\n.*breakpoint already hit 1 time\r\n.*ignore next 2 hits.*" - - send_gdb "db\n" - gdb_expect { - -re "Delete all breakpoints.*y or n. $" { - send_gdb "y\n" - exp_continue - } - -re "y\r\n$gdb_prompt $" {} - -re ".*$gdb_prompt $" { # This happens if there were no breakpoints - } - timeout { perror "Delete all breakpoints (timeout)" ; return } - } - send_gdb "lb\n" - gdb_expect { - -re "No breakpoints or watchpoints..*$gdb_prompt $" {} - -re ".*$gdb_prompt $" { perror "breakpoints not deleted" ; return } - timeout { perror "info breakpoints (timeout)" ; return } - } -gdb_test "xbreak" "Breakpoint.*at.*file.*sum.c, line 15." -gdb_test "xbreak print_average" "Breakpoint.*at.*file.*average.c, line 29." -gdb_test "xbreak if (1)" "Note: breakpoint.*also set at pc.*Breakpoint.*at.*file.*sum.c, line 15." -gdb_test "xbreak print_average if (1)" "Note: breakpoint.*also set at pc.*Breakpoint.*at.*file.*average.c, line 29." - - send_gdb "lb\n" - gdb_expect { - -re "Num Type Disp Enb Address What.*breakpoint keep y.*sum.c:15.*breakpoint keep y.*average.c:29.*breakpoint keep y.*sum.c:15.*stop only if 1.*breakpoint keep y.*average.c:29.*stop only if 1.*$gdb_prompt $" {pass "lb on xbreaks"} - -re ".*$gdb_prompt $" { fail "breakpoints not deleted"} - timeout { fail "info breakpoints (timeout)" } - } - -} - -# -# test_signals -# -proc test_signals { } { - gdb_test "handle SIGTERM nostop noprint" "" - gdb_test "z 15 s" "Signal.*Stop.*Print.*Pass to program.*Description\r\nSIGTERM.*Yes.*Yes.*Yes.*Terminated" - gdb_test "z 15 r" "Signal.*Stop.*Print.*Pass to program.*Description\r\nSIGTERM.*No.*No.*Yes.*Terminated" - gdb_test "z 15 i" "Signal.*Stop.*Print.*Pass to program.*Description\r\nSIGTERM.*No.*No.*No.*Terminated" - gdb_test "z 15 r" "Signal.*Stop.*Print.*Pass to program.*Description\r\nSIGTERM.*No.*Yes.*No.*Terminated" - gdb_test "z 15 Q" "Signal.*Stop.*Print.*Pass to program.*Description\r\nSIGTERM.*No.*No.*No.*Terminated" - gdb_test "lz" "Signal.*Stop.*Print.*Pass to program.*Description\r\n\r\nSIGHUP.*Yes.*" -} - - - -# Start with a fresh gdb. -global GDBFLAGS -set saved_gdbflags $GDBFLAGS - -set GDBFLAGS "$GDBFLAGS --xdb" - -gdb_exit -gdb_start - -xdb_reinitialize_dir $srcdir/$subdir - -gdb_load ${binfile} -send_gdb "set width 0\n" -gdb_expect -re "$gdb_prompt $" -test_search -test_viewing_loc -test_dir_list -test_list_sources -test_vlist -test_va -gdb_test "next" -gdb_test "l" "No arguments.\r\nc = *.*\r\nfirst = 0\r\nlast = 0" -#test_list_globals -test_list_registers -test_backtrace - -# Start with a fresh gdb. - -gdb_exit -gdb_start -xdb_reinitialize_dir $srcdir/$subdir - -gdb_load ${binfile} -send_gdb "set width 0\n" -gdb_expect -re "$gdb_prompt $" -test_go - - -gdb_exit -gdb_start -xdb_reinitialize_dir $srcdir/$subdir - -gdb_load ${binfile} -send_gdb "set width 0\n" -gdb_expect -re "$gdb_prompt $" -gdb_test "break main" "" -gdb_test "R" "" -gdb_test "S" "39\[ \t\]+last = num-1;" -test_breakpoints -test_signals -gdb_test "sm" "" -gdb_test "info set" ".*pagination: State of pagination is off.*" -gdb_test "am" "" -gdb_test "info set" ".*pagination: State of pagination is on.*" -gdb_exit - -set GDBFLAGS $saved_gdbflags - -return 0 - - - - - - diff --git a/gdb/testsuite/gdb.hp/gdb.defects/Makefile.in b/gdb/testsuite/gdb.hp/gdb.defects/Makefile.in deleted file mode 100644 index feb456eaab..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.defects/Makefile.in +++ /dev/null @@ -1,25 +0,0 @@ -VPATH = @srcdir@ -srcdir = @srcdir@ - -EXECUTABLES = bs14602 bs15503 solib-d solib-d1.sl solib-d2.sl - -all: - @echo "Nothing to be done for all..." - -info: -install-info: -dvi: -install: -uninstall: force -installcheck: -check: - -clean mostlyclean: - -rm -f *~ *.o *.ci - -rm -f *.dwo *.dwp - -rm -f core $(EXECUTABLES) - -distclean maintainer-clean realclean: clean - -rm -f Makefile config.status config.log - -rm -f *-init.exp - -rm -fr *.log summary detail *.plog *.sum *.psum site.* diff --git a/gdb/testsuite/gdb.hp/gdb.defects/bs14602.c b/gdb/testsuite/gdb.hp/gdb.defects/bs14602.c deleted file mode 100644 index 232b40842e..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.defects/bs14602.c +++ /dev/null @@ -1,9 +0,0 @@ -/* Test file for bs14602.exp */ - -double v_double = 0; -long double v_long_double = 12345.67890; - -int main () { - v_double = 0; - v_long_double = 12345.67890; -} diff --git a/gdb/testsuite/gdb.hp/gdb.defects/bs14602.exp b/gdb/testsuite/gdb.hp/gdb.defects/bs14602.exp deleted file mode 100644 index 045892213e..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.defects/bs14602.exp +++ /dev/null @@ -1,111 +0,0 @@ -# This file was written by Sue Kimura. (sue_kimura@hp.com) -# -# Test for CLLbs14602 -- problem with recognizing long double on 10.20. -# -# Source file: bs14602.c - -if { [skip_hp_tests] } { continue } - -# -# test running programs -# - - -set testfile bs14602 -set srcfile ${testfile}.c -set binfile ${objdir}/${subdir}/${testfile} - -# Create and source the file that provides information about the compiler -# used to compile the test case. -if [get_compiler_info] { - return -1 -} - -# set up appropriate compile option to recognize long double -if {$hp_aCC_compiler || $hp_cc_compiler} { - set ansi_option "-Ae" -} else { - set ansi_option "" -} - -if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "$binfile" executable "debug {additional_flags=${ansi_option}}"] != "" } { - perror "Couldn't compile ${srcfile}" - return -1 -} - - -# Start with a fresh gdb. - -gdb_exit -gdb_start -gdb_reinitialize_dir $srcdir/$subdir -gdb_load $binfile - - -# get to end of main so we can check out some stuff -if ![runto main] { - perror "couldn't run to breakpoint main" - continue -} - -gdb_test "txbreak" \ - "Breakpoint $decimal at $hex: file .*bs14602.c, line 9." \ - "set breakpoint at end of main" - -gdb_test "continue" \ - "Continuing.\r\n$hex in main* \\(\\) at .*bs14602.c:9\r\n.*" \ - "continue to end of main" - -# test some simple things about long double -gdb_test "whatis v_long_double" \ - "type = long double" \ - "whatis v_long_double" - -gdb_test "ptype v_long_double" \ - "type = long double" \ - "ptype v_long_double" - -gdb_test "print sizeof \(long double\)" \ - " = 16" \ - "print sizeof long double" - -gdb_test "print sizeof \(v_long_double\)" \ - " = 16" \ - "print sizeof v_long_double" - -gdb_test "print v_long_double" \ - " = 12345.67890000000079453457146883011" \ - "print v_long_double - 1" - -gdb_test "set variable v_long_double = 98765.43210" \ - "" \ - "set variable v_long_double to constant value" - -gdb_test "print v_long_double" \ - " = 98765.43210000000544823706150054932" \ - "print v_long_double - 2" - -gdb_test "set variable v_double = v_long_double" \ - "" \ - " set variable v_double with v_long_double" - -gdb_test "print v_double" \ - " = 98765.432100000005" \ - " print v_double" - -#reset v_long_double -gdb_test "set variable v_long_double = 0" \ - "" \ - "reset v_long_double to 0" - -gdb_test "print v_long_double" \ - " = 0" \ - "print v_long_double - 3" - -gdb_test "set variable v_long_double = v_double" \ - "" \ - " set variable v_long_double with v_long_double" - -gdb_test "print v_long_double" \ - " = 98765.43210000000544823706150054932" \ - "print v_long_double - 4 " diff --git a/gdb/testsuite/gdb.hp/gdb.defects/solib-d.c b/gdb/testsuite/gdb.hp/gdb.defects/solib-d.c deleted file mode 100644 index ec803fe06a..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.defects/solib-d.c +++ /dev/null @@ -1,6 +0,0 @@ -main() -{ - function_from_primary(); - function_from_secondary(); -} - diff --git a/gdb/testsuite/gdb.hp/gdb.defects/solib-d.exp b/gdb/testsuite/gdb.hp/gdb.defects/solib-d.exp deleted file mode 100644 index f08b475a9d..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.defects/solib-d.exp +++ /dev/null @@ -1,271 +0,0 @@ -# Copyright (C) 1997-2015 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . */ - -# This file was written by srikanth (with huge chunks borrowed from old ones) -# -# Regression test for -# -# CLLbs14756 -# -# o catch load command does not stop for implicit loads. -# -# CLLbs15382 -# -# o sharedlibrary command ignores its argument and ends -# up loading every shared library there is ... -# -# CLLbs15582 -# -# o info line non-existent-function dumps core -# o clear non-existent function dumps core -# o xbreak non-existent-function dumps core -# -# CLLbs15725 -# -# o gdb prints static and extern variables in shlibs incorrectly. -# -# CLLbs16090 -# -# o deferred breakpoints should kick in for shlibs loaded explicitly -# with the sharedlibrary command. -# o GDB confuses export stubs with actual function. -# -# - -if { [skip_hp_tests] } { continue } - - -# are we on a target board -if ![isnative] { - return -} - -# This test is presently only valid on HP-UX, since it requires -# that we use HP-UX-specific compiler & linker options to build -# the testcase. -# -setup_xfail "*-*-*" -clear_xfail "hppa*-*-*hpux*" - -set prototypes 0 -set testfile "solib-d" -set srcfile ${testfile}.c -set binfile ${objdir}/${subdir}/${testfile} -set testfile1 ${objdir}/${subdir}/${testfile}1.o -set testfile2 ${objdir}/${subdir}/${testfile}2.o -set libfile1 ${objdir}/${subdir}/${testfile}1.sl -set libfile2 ${objdir}/${subdir}/${testfile}2.sl - -# Create and source the file that provides information about the compiler -# used to compile the test case. -if [get_compiler_info] { - return -1 -} - -# set up appropriate compile option to recognize long double -if {$hp_aCC_compiler || $hp_cc_compiler} { - set picflag "+z" - set ansiflag "-Ae" -} else { - set picflag "-fpic" - set ansiflag "" -} - - -# Build the shared libraries this test case needs. -# -#cd ${subdir} - -if { [gdb_compile "${srcdir}/${subdir}/${testfile}1.c" "${testfile1}" object "{debug additional_flags=${picflag}}"] != "" } { - perror "Couldn't compile ${testfile}1.c" - return -1 -} - -if { [gdb_compile "${srcdir}/${subdir}/${testfile}2.c" "${testfile2}" object "{debug additional_flags=${picflag}}"] != ""} { - perror "Couldn't compile ${testfile}2.c" - return -1 -} - -remote_exec build "ld -b ${testfile1} -o ${libfile1}" -remote_exec build "ld -b ${testfile2} -o ${libfile2}" - -# Build the test case - -if { [gdb_compile "${srcdir}/${subdir}/${srcfile} ${libfile1} ${libfile2}" "${binfile}" executable "{debug additional_flags=${ansiflag} -Wl,-aarchive}"] != "" } { - perror "Couldn't build ${binfile}" - return -1 -} - -# Start with a fresh gdb - -gdb_exit -gdb_start -gdb_reinitialize_dir $srcdir/$subdir -gdb_load ${binfile} - -# Verify that we can set a generic catchpoint on shlib loads. I.e., that -# we can catch any shlib load, without specifying the name. -# -gdb_test "catch load" "Catchpoint \[0-9\]* .load .*" \ - "set generic catch load" - -# Verify that implicit shlib loads are caught and reported. -send_gdb "run\n" -gdb_expect { - -re ".*solib-d1.*$gdb_prompt $" { - pass "Catch implicit load at startup" - } - -re "Inferior \[0-9\]+ exited.*$gdb_prompt $" { - fail "CLLbs14756 || CLLbs16090 came back ???" - } - timeout { fail "(timeout) implicit library load" } -} - -gdb_exit -gdb_start -gdb_reinitialize_dir $srcdir/$subdir -gdb_load ${binfile} - -if ![runto_main] { fail "breakpoint at main did not trigger ?" } - -# verify that we print globals from shlibs correctly. -gdb_test "p global_from_primary" " = 5678" \ - "print global from shlib (CLLbs15725)" - -gdb_test "p global_from_secondary" " = 9012" \ - "print global from shlib (CLLbs15725)" - -# verify that we print static variables from shlibs correctly. -if { ![runto function_from_primary] } { return } -gdb_test "p file_static" " = 1234" "print file static variable (CLLbs15725)" - -if { ![runto function_from_secondary] } { return } -gdb_test "p local_static" " = 3456" "print local static variable (CLLbs15725)" - -gdb_exit -gdb_start -gdb_reinitialize_dir $srcdir/$subdir -gdb_load ${binfile} - -gdb_test "set auto-solib-add 0" "" "turn off auto shlib debug loading" - -if ![runto_main] { - perror "C function calling tests suppressed" -} - -# verify that "clear non-existent-symbol" does not crash -gdb_test "clear junkfunc" "Location not found.*" \ - "clear non-existent function does not dump core !" - -# verify that "info line non-existent-symbol" does not crash -gdb_test "info line junkfunc" "Location not found.*" \ - "info line junkfunc does not dump core !" - -# verify that "xbreak non-existent-symbol" does not crash -gdb_test "xbreak junkfunc" "Function \"junkfunc\" not defined.*" \ - "xbreak junkfunc does not dump core !" - -gdb_test "list function_from_primary" \ - "No line number known for function_from_primary.*" \ - "turning off auto shlib debug loading" - -send_gdb "sharedlibrary solib-d1\n" -gdb_expect { - -re "Reading symbols from.*solib-d1.*$gdb_prompt $" { - pass "loading primary library on demand (1)" - } - -re "--Adding symbols for shared library.*solib-d1.*$gdb_prompt $" { - pass "loading primary library on demand (2)" - } - -re "$gdb_prompt $" { fail "loading primary library on demand (3)" } - timeout { fail "(timeout) loading primary library on demand" } -} - -# make sure that load above of primary also did not pull in secondary. -send_gdb "list function_from_secondary\n" -gdb_expect { - -re "No symbol.*context.*$gdb_prompt $" { - pass "loaded only what we needed (1)" - } - -re "No line number known for function_from_secondary.*$gdb_prompt $" { - pass "loaded only what we needed (2)" - } - -re ".*9012.*$gdb_prompt $" { fail "Oops ! CLLbs15382 came back ?" } - timeout { fail "(timeout) printing global" } -} - -gdb_exit -gdb_start -gdb_reinitialize_dir $srcdir/$subdir -gdb_load ${binfile} - -gdb_test "set auto-solib-add 0" "" "turn off auto shlib debug loading" - -gdb_test "set stop-on-solib-event 1" "" "stop-on-solib-event" - -# verify that we set breakpoint on the function and not the export stub -# used to be that we set bp on the export stub of _start and thus miss -# shlib loads in some cases (where the stub exists) -send_gdb "run\n" -gdb_expect { - -re "Stopped due to shared library event.*$gdb_prompt $" { - pass "stop for shlib event" - } - -re "Inferior \[0-9\]+ exited.*$gdb_prompt $" { - fail "Bug CLLbs16090 came back ?" - } - timeout { fail "(timeout) stop for shlib event " } -} - -gdb_test "b main" "Breakpoint 1 at.*" "set breakpoint on main" - -gdb_test "set stop-on-solib-event 0" "" "stop-on-solib-event (timeout)" - -# verify that we set breakpoint on the function and not the export stub -gdb_test "cont" "Breakpoint 1.*main.*" "run to main" - -# On PA64 we read in the unwind info and linker symbol table which lets -# us set the breakpoint and not defer it. -send_gdb "b garbage\n" -gdb_expect { - -re "Breakpoint.*deferred.*garbage.*library containing.*is loaded.*$gdb_prompt $" { - pass " set deferred breakpoint (1)" - } - -re "Breakpoint 2 at 0x.*$gdb_prompt $" { - pass " set deferred breakpoint (2)" - } - -re "$gdb_prompt $" { fail " set deferred breakpoint (3)" } - timeout { fail "(timeout) set deferred breakpoint" } -} - -# make sure that the sharedlibrary command enables any deferred breakpoints -# that it should. -send_gdb "sharedlibrary lib\n" -gdb_expect { - -re "Reading.*solib-d1.*$gdb_prompt $" { - pass "load up all shared libs (1)" - } - -re "Loading.*dld.sl.*--Adding symbols.*solib-d1.*$gdb_prompt $" { - pass "load up all shared libs (2)" - } - -re "$gdb_prompt $" { fail "load up all libraries" } - timeout { fail "(timeout) load all libraries " } -} - -# do we stop at garbage ? If yes ok. -gdb_test "cont" "Breakpoint.*garbage.*" "deferred breakpoint enabled" - -gdb_exit -return 0 diff --git a/gdb/testsuite/gdb.hp/gdb.defects/solib-d1.c b/gdb/testsuite/gdb.hp/gdb.defects/solib-d1.c deleted file mode 100644 index b6da64d21d..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.defects/solib-d1.c +++ /dev/null @@ -1,12 +0,0 @@ -static int file_static = 1234; -int global_from_primary = 5678; - -int function_from_primary() -{ - garbage(); -} - -force_generation_of_export_stub() -{ - _start(); /* force main module to have an export stub for _start() */ -} diff --git a/gdb/testsuite/gdb.hp/gdb.defects/solib-d2.c b/gdb/testsuite/gdb.hp/gdb.defects/solib-d2.c deleted file mode 100644 index 024616baf2..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.defects/solib-d2.c +++ /dev/null @@ -1,11 +0,0 @@ -int global_from_secondary = 9012; -int function_from_secondary() -{ - static int local_static = 3456; - return 0; -} - -garbage() -{ - return 0; -} diff --git a/gdb/testsuite/gdb.hp/gdb.objdbg/Makefile.in b/gdb/testsuite/gdb.hp/gdb.objdbg/Makefile.in deleted file mode 100644 index 2440cf44cd..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.objdbg/Makefile.in +++ /dev/null @@ -1,26 +0,0 @@ -VPATH = @srcdir@ -srcdir = @srcdir@ - -EXECUTABLES = objdbg01/test0 objdbg01/test1 objdbg02/test \ - objdbg03/test objdbg04/test0 objdbg04/test1 - -all: - @echo "Nothing to be done for all..." - -info: -install-info: -dvi: -install: -uninstall: force -installcheck: -check: - -clean mostlyclean: - -rm -f *~ objdbg*/*.o objdbg*/*.ci - -rm -f *.dwo *.dwp - -rm -f core $(EXECUTABLES) - -distclean maintainer-clean realclean: clean - -rm -f Makefile config.status config.log - -rm -f *-init.exp - -rm -fr *.log summary detail *.plog *.sum *.psum site.* diff --git a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg01.exp b/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg01.exp deleted file mode 100644 index 02ec5d363f..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg01.exp +++ /dev/null @@ -1,223 +0,0 @@ -# Test reading debug information from in object files. - -if { [skip_hp_tests] } { continue } - -if { ![istarget "hppa*-*-hpux*"] } { - verbose "HPUX test ignored for non-hppa targets." - return 0 -} - -set testfile "test" -set srcsubdir ${srcdir}/${subdir}/objdbg01 -set toolssubdir ${srcdir}/${subdir}/tools -set objdbgdir ${objdir}/${subdir}/objdbg01 -set binfile ${objdbgdir}/${testfile} -set symaddrfile ${toolssubdir}/symaddr - -# Create and source the file that provides information about the compiler -# used to compile the test case. -if [get_compiler_info] { - return -1 -} - -if {!$hp_aCC_compiler && !$hp_cc_compiler} { - return 0 -} - -if { [gdb_compile "${toolssubdir}/test-objdbg.cc" "${objdbgdir}/test-objdbg.o" object "debug c++ {additional_flags=-I${toolssubdir} +objdebug}"] != "" } { - untested objdbg01.exp - return -1 -} - -if { [gdb_compile "${srcsubdir}/x1.cc" "${objdbgdir}/x1.o" object "debug c++ {additional_flags=-I${srcsubdir} +objdebug}"] != "" } { - perror "Couldn't compile x1.cc" - return -1 -} - -if { [gdb_compile "${srcsubdir}/x2.cc" "${objdbgdir}/x2.o" object "debug c++ {additional_flags=-I${srcsubdir} +objdebug}"] != "" } { - perror "Couldn't compile x2.cc" - return -1 -} - -if { [gdb_compile "${srcsubdir}/x3.cc" "${objdbgdir}/x3.o" object "debug c++ {additional_flags=-I${srcsubdir} +objdebug}"] != "" } { - perror "Couldn't compile x3.cc" - return -1 -} - -if { [gdb_compile "${objdbgdir}/x1.o ${objdbgdir}/x2.o ${objdbgdir}/x3.o" "${binfile}0" executable "debug c++ {additional_flags=-I${srcsubdir} +objdebug}"] != "" } { - perror "Couldn't compile ${binfile}0" - return -1 -} - -if {[gdb_compile "${objdbgdir}/x3.o ${objdbgdir}/x2.o ${objdbgdir}/x1.o" "${binfile}1" executable "debug c++ {additional_flags=-I${srcsubdir} +objdebug}"] != "" } { - perror "Couldn't compile ${binfile}1" - return -1 -} - -# Test two executables. The first has x1.cc linked first, the second -# has x3.cc linked first. The difference is that in the first one, -# the Info instantiation from x1.cc is taken, in the second, its -# from x3.cc. - -for {set filenum 0} {$filenum < 2} {incr filenum 1} { - - # Lets test some commons - # Need to restart each to make sure objects are not loaded - # Also cross check the address with what is actually in the - # object file (call the executable ${symaddrfile} to retrieve the - # information). - - set exec_output [lindex [remote_exec build "${symaddrfile} ${binfile}${filenum} acomm"] 1] - regsub -all "\[\r\n\]" ${exec_output} "" exec_output - - gdb_exit - gdb_start - gdb_reinitialize_dir ${srcsubdir} - gdb_load ${binfile}${filenum} - gdb_test "p &acomm" "..* = \\(int \[*\]\\) 0x${exec_output}.*" - - gdb_exit - gdb_start - gdb_reinitialize_dir ${srcsubdir} - gdb_load ${binfile}${filenum} - gdb_test "b main" "Breakpoint \[0-9\]+ at 0x\[0-9a-f\]+: file ..*/x1.cc, line 20." - gdb_test "run" "Starting program:.*Breakpoint \[0-9\]+, main .*/x1.cc:20.*20.*acomm.*=.*1.*" - gdb_test "s 1" "21.*" - gdb_test "p acomm" ".* = 1.*" - gdb_test "p &acomm" "..* = \\(int \[*\]\\) 0x${exec_output}.*" - - # Step through each line. - # Do this three times. - # First round: Test that things are okay after printing commons - # above. - # Second round: Restart gdb and make sure we can walk through - # Third round: Do NOT restrart gdb to verify that the debug information - # was not messed up by loading additional object files from - # the first run through. - for {set i 0} {$i < 3} {incr i 1} { - if $i==1 then { - gdb_exit - gdb_start - gdb_reinitialize_dir ${srcsubdir} - gdb_load ${binfile}${filenum} - } - if $i!=2 then { - gdb_test "b main" \ - "Breakpoint \[0-9\]+ at 0x\[0-9a-f\]+: file ..*/x1.cc, line 20." - } - if $i!=0 then { - gdb_test "run" \ - "Starting program:.*Breakpoint \[0-9\]+, main .*/x1.cc:20.*" - gdb_test "s 1" "21.*" - } - gdb_test "s 1" "Info::p .*/x3.h:11.*" - gdb_test "s 1" "PP::print .*/x2.cc:8.*" - gdb_test "s 1" ".*9.*" - gdb_test "s 1" "Info::p .*/x3.h:12.*" - gdb_test "s 1" "main .*/x1.cc:22.*" - gdb_test "s 1" "foo .*/x3.cc:5.*" - gdb_test "s 1" "Info::p .*/x3.h:11.*" - gdb_test "s 1" "PP::print .*/x2.cc:8.*" - gdb_test "s 1" ".*9.*" - gdb_test "s 1" "Info::p .*/x3.h:12.*" - gdb_test "s 1" "foo .*/x3.cc:6.*" - gdb_test "s 1" "Info::p .*/x3.h:11.*" - gdb_test "s 1" "QQ::print .*/x2.cc:13.*" - gdb_test "s 1" ".*14.*" - gdb_test "s 1" "Info::p .*/x3.h:12.*" - gdb_test "s 1" "foo .*/x3.cc:7.*" - gdb_test "s 1" "main .*/x1.cc:24.*" - gdb_test "s 1" ".*25.*" - if [istarget "hppa64-*-*"] { - gdb_test "s 1" "0x\[0-9a-f\]+ in .*" - gdb_continue_to_end - } else { - gdb_test "s 1" "0x\[0-9a-f\]+ in _start .*" - gdb_continue_to_end "" "s 1" - } - } - - # Test various ptypes, and combinations of them - # Test things multiple times in each set to make sure that the debug - # information did not get messed up. - - gdb_exit - gdb_start - gdb_reinitialize_dir ${srcsubdir} - gdb_load ${binfile}${filenum} - gdb_test "ptype QQ" "type = (class |)QQ {..*void print( |)..*}.*" - gdb_test "ptype PP" "type = (class |)PP {..*void print( |)..*}.*" - gdb_test "ptype QQ" "type = (class |)QQ {..*void print( |)..*}.*" - - gdb_exit - gdb_start - gdb_reinitialize_dir ${srcsubdir} - gdb_load ${binfile}${filenum} - gdb_test "ptype PP" "type = (class |)PP {..*void print( |)..*}.*" - gdb_test "ptype QQ" "type = (class |)QQ {..*void print( |)..*}.*" - gdb_test "ptype PP" "type = (class |)PP {..*void print( |)..*}.*" - - gdb_exit - gdb_start - gdb_reinitialize_dir ${srcsubdir} - gdb_load ${binfile}${filenum} - gdb_test "ptype Info" "type = (class |)Info {..*void p( |)..*}.*" - gdb_test "ptype Info" "type = (class |)Info {..*void p( |)..*}.*" - gdb_test "ptype Info" "type = (class |)Info {..*void p( |)..*}.*" - - gdb_exit - gdb_start - gdb_reinitialize_dir ${srcsubdir} - gdb_load ${binfile}${filenum} - gdb_test "ptype Info" "type = (class |)Info {..*void p( |)..*}.*" - gdb_test "ptype Info" "type = (class |)Info {..*void p( |)..*}.*" - gdb_test "ptype Info" "type = (class |)Info {..*void p( |)..*}.*" - - gdb_exit - gdb_start - gdb_reinitialize_dir ${srcsubdir} - gdb_load ${binfile}${filenum} - gdb_test "ptype Info" "type = template <..*> (class |)Info {..*}.*" - gdb_test "ptype Info" "type = (class |)Info {..*void p( |)..*}.*" - gdb_test "ptype Info" "type = (class |)Info {..*void p( |)..*}.*" - gdb_test "ptype Info" "type = template <..*> (class |)Info {..*}.*" - - gdb_exit - gdb_start - gdb_reinitialize_dir ${srcsubdir} - gdb_load ${binfile}${filenum} - gdb_test "ptype class QQ" "type = (class |)QQ {..*void print( |)..*}.*" - gdb_test "ptype class PP" "type = (class |)PP {..*void print( |)..*}.*" - gdb_test "ptype class QQ" "type = (class |)QQ {..*void print( |)..*}.*" - - gdb_exit - gdb_start - gdb_reinitialize_dir ${srcsubdir} - gdb_load ${binfile}${filenum} - gdb_test "ptype class PP" "type = (class |)PP {..*void print( |)..*}.*" - gdb_test "ptype class QQ" "type = (class |)QQ {..*void print( |)..*}.*" - gdb_test "ptype class PP" "type = (class |)PP {..*void print( |)..*}.*" - - gdb_exit - gdb_start - gdb_reinitialize_dir ${srcsubdir} - gdb_load ${binfile}${filenum} - gdb_test "ptype class Info" \ - "type = (class |)Info {..*void p( |)..*}.*" - gdb_test "ptype class Info" \ - "type = (class |)Info {..*void p( |)..*}.*" - gdb_test "ptype class Info" \ - "type = (class |)Info {..*void p( |)..*}.*" - - gdb_exit - gdb_start - gdb_reinitialize_dir ${srcsubdir} - gdb_load ${binfile}${filenum} - gdb_test "ptype class Info" \ - "type = (class |)Info {..*void p( |)..*}.*" - gdb_test "ptype class Info" \ - "type = (class |)Info {..*void p( |)..*}.*" - gdb_test "ptype class Info" \ - "type = (class |)Info {..*void p( |)..*}.*" -} - diff --git a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg01/x1.cc b/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg01/x1.cc deleted file mode 100644 index 0de3153d9c..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg01/x1.cc +++ /dev/null @@ -1,25 +0,0 @@ -#include -#include "x3.h" - -extern void foo(); - -extern int acomm; - -int main3() -{ - return 1; -} - -int main2() -{ - return 0; -} - -int main() -{ - acomm = 1; - (new Info)->p(new PP); - foo(); - - return 0; -} diff --git a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg01/x2.cc b/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg01/x2.cc deleted file mode 100644 index af588fbc00..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg01/x2.cc +++ /dev/null @@ -1,14 +0,0 @@ -#include "x3.h" -#include - -int acomm; - -void PP::print() -{ - printf("In PP::print()\n"); -} - -void QQ::print() -{ - printf("In QQ::print()\n"); -} diff --git a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg01/x3.cc b/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg01/x3.cc deleted file mode 100644 index 88fe5453ec..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg01/x3.cc +++ /dev/null @@ -1,7 +0,0 @@ -#include "x3.h" - -void foo() -{ - (new Info)->p(new PP); - (new Info)->p(new QQ); -} diff --git a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg01/x3.h b/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg01/x3.h deleted file mode 100644 index d03a5503c5..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg01/x3.h +++ /dev/null @@ -1,22 +0,0 @@ - -template -class Info { -public: - void p(T *x); -}; - -template -void Info::p(T *x) -{ - x->print(); -} - -class PP { -public: - void print(); -}; - -class QQ { -public: - void print(); -}; diff --git a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg02.exp b/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg02.exp deleted file mode 100644 index 5677b7ea60..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg02.exp +++ /dev/null @@ -1,86 +0,0 @@ -# Test reading debug information from in object files. - -if { [skip_hp_tests] } { continue } - -if { ![istarget "hppa*-*-hpux*"] } { - verbose "HPUX test ignored for non-hppa targets." - return 0 -} - -set testfile "test" -set srcsubdir ${srcdir}/${subdir}/objdbg02 -set objdbgdir ${objdir}/${subdir}/objdbg02 -set binfile ${objdbgdir}/${testfile} -set toolssubdir ${srcdir}/${subdir}/tools - -# Create and source the file that provides information about the compiler -# used to compile the test case. -if [get_compiler_info] { - return -1 -} - -if {!$hp_aCC_compiler && !$hp_cc_compiler} { - return 0 -} - -if { [gdb_compile "${toolssubdir}/test-objdbg.cc" "${objdbgdir}/test-objdbg.o" object "debug c++ {additional_flags=-I${toolssubdir} +objdebug}"] != "" } { - untested objdbg02.exp - return -1 -} - -if { [gdb_compile "${srcsubdir}/x1.cc" "${objdbgdir}/x1.o" object "debug c++ {additional_flags=-I${srcsubdir} +objdebug}"] != "" } { - perror "Couldn't compile x1.cc" - return -1 -} - -if { [gdb_compile "${srcsubdir}/x2.cc" "${objdbgdir}/x2.o" object "debug c++ {additional_flags=-I${srcsubdir} +objdebug}"] != "" } { - perror "Couldn't compile x2.cc" - return -1 -} - -if { [gdb_compile "${srcsubdir}/x3.cc" "${objdbgdir}/x3.o" object "debug c++ {additional_flags=-I${srcsubdir} +objdebug}"] != "" } { - perror "Couldn't compile x3.cc" - return -1 -} - -remote_exec build "rm -f ${objdbgdir}/test.a" -set status [remote_exec build "ar cr ${objdbgdir}/test.a ${objdbgdir}/x2.o ${objdbgdir}/x3.o"] -if { [lindex $status 0] != 0 } { - perror "Couldn't compile test.a" - return -1 -} -remote_exec build "rm -f ${objdbgdir}/x2.o ${objdbgdir}/x3.o" - -if { [gdb_compile "${objdbgdir}/x1.o ${objdbgdir}/test.a" "$binfile" executable "debug c++ {additional_flags=-I${srcsubdir} +objdebug}"] != "" } { - perror "Couldn't compile ${binfile}" - return -1 -} - -# Test loading debug information from an archive file - -gdb_exit -gdb_start -gdb_reinitialize_dir ${srcsubdir} -gdb_load ${binfile} - -gdb_test "b main" "Breakpoint \[0-9\]+ at 0x\[0-9a-f\]+: file ..*/x1.cc, line 12." -gdb_test "run" "Starting program:.*Breakpoint \[0-9\]+, main .*/x1.cc:12.*" -gdb_test "s 1" ".*13.*" -gdb_test "s 1" "foo1 .*/x2.cc:15.*" -gdb_test "s 1" ".*16.*" -gdb_test "s 1" "foo2 .*/x2.cc:10.*" -gdb_test "s 1" ".*11.*" -gdb_test "s 1" "foo1 .*/x2.cc:17.*" -gdb_test "s 1" "main .*/x1.cc:14.*" -gdb_test "s 1" "foo3 .*/x3.cc:5.*" -gdb_test "s 1" ".*6.*" -gdb_test "s 1" "main .*/x1.cc:15.*" -gdb_test "s 1" ".*16.*" -if [istarget "hppa64-*-*"] { - gdb_test "s 1" "0x\[0-9a-f\]+ in .*START.*" - gdb_continue_to_end -} else { - gdb_test "s 1" "0x\[0-9a-f\]+ in _start .*" - gdb_continue_to_end "" "s 1" -} - diff --git a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg02/x1.cc b/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg02/x1.cc deleted file mode 100644 index 7ec0cf1840..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg02/x1.cc +++ /dev/null @@ -1,16 +0,0 @@ -#include - -extern void foo1(); -extern void foo3(); - -struct foo_type; - -int main() -{ - struct foo_type *x; - - printf("In main.\n"); - foo1(); - foo3(); - return 0; -} diff --git a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg02/x2.cc b/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg02/x2.cc deleted file mode 100644 index 627f02d2ba..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg02/x2.cc +++ /dev/null @@ -1,17 +0,0 @@ -#include - -struct foo_type { - int t1; - int t2; -}; - -static void foo2() -{ - printf("In foo2.\n"); -} - -void foo1() -{ - printf("In foo1.\n"); - foo2(); -} diff --git a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg02/x3.cc b/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg02/x3.cc deleted file mode 100644 index d03ea5146a..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg02/x3.cc +++ /dev/null @@ -1,6 +0,0 @@ -#include - -void foo3() -{ - printf("In foo3.\n"); -} diff --git a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg03.exp b/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg03.exp deleted file mode 100644 index 73defdcc13..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg03.exp +++ /dev/null @@ -1,165 +0,0 @@ -# Test reading debug information from in object files. - -if { [skip_hp_tests] } { continue } - -if { ![istarget "hppa*-*-hpux*"] } { - verbose "HPUX test ignored for non-hppa targets." - return 0 -} - -set testfile "test" -set srcsubdir ${srcdir}/${subdir}/objdbg03 -set objdbgdir ${objdir}/${subdir}/objdbg03 -set binfile ${objdbgdir}/${testfile} -set toolssubdir ${srcdir}/${subdir}/tools -if [istarget "hppa64-*-*"] { - set symaddrfile ${toolssubdir}/symaddr.pa64 -} else { - set symaddrfile ${toolssubdir}/symaddr -} - -# Create and source the file that provides information about the compiler -# used to compile the test case. -if [get_compiler_info] { - return -1 -} - -if {!$hp_aCC_compiler && !$hp_cc_compiler} { - return 0 -} - -if { [gdb_compile "${toolssubdir}/test-objdbg.cc" "${objdbgdir}/test-objdbg.o" object "debug c++ {additional_flags=-I${toolssubdir} +objdebug}"] != "" } { - untested objdbg03.exp - return -1 -} - -if { [gdb_compile "${srcsubdir}/x1.cc" "${objdbgdir}/x1.o" object "debug c++ {additional_flags=-I${srcsubdir} +objdebug}"] != "" } { - perror "Couldn't compile x1.cc" - return -1 -} - -if { [gdb_compile "${srcsubdir}/x2.cc" "${objdbgdir}/x2.o" object "debug c++ {additional_flags=-I${srcsubdir} +objdebug}"] != "" } { - perror "Couldn't compile x2.cc" - return -1 -} - -if { [gdb_compile "${srcsubdir}/x3.cc" "${objdbgdir}/x3.o" object "debug c++ {additional_flags=-I${srcsubdir} +objdebug}"] != "" } { - perror "Couldn't compile x3.cc" - return -1 -} - -if { [gdb_compile "${objdbgdir}/x1.o ${objdbgdir}/x2.o ${objdbgdir}/x3.o" "${binfile}" executable "debug c++ {additional_flags=-I${srcsubdir} +objdebug}"] != "" } { - perror "Couldn't compile ${binfile}" - return -1 -} - -# -# Test some normal commons -# - -# Print the types - -gdb_exit -gdb_start -gdb_reinitialize_dir ${srcsubdir} -gdb_load ${binfile} - -gdb_test "ptype common1" "type = int" -gdb_test "ptype common2" "type = int" -gdb_test "ptype common3" "type = int" -gdb_test "ptype data1" "type = int" -gdb_test "ptype data2" "type = int" -gdb_test "ptype data3" "type = int" -gdb_test "ptype common11" "type = int" -gdb_test "ptype common10" "type = int" -gdb_test "ptype data10" "type = int" -gdb_test "ptype data11" "type = int" - -# Print the values - -gdb_exit -gdb_start -gdb_reinitialize_dir ${srcsubdir} -gdb_load ${binfile} - -gdb_test "b main" "Breakpoint \[0-9\]+ at 0x\[0-9a-f\]+: file ..*/x1.cc, line 11." -gdb_test "run" "Starting program:.*Breakpoint \[0-9\]+, main .*/x1.cc:11.*" -gdb_test "p data1" "..* = 1" -gdb_test "p data2" "..* = 2" -gdb_test "p data3" "..* = 3" -gdb_test "p data10" "..* = 10" -gdb_test "p data11" "..* = 11" -gdb_test "n" ".*12.*" -gdb_test "p common11" "..* = 11" - -gdb_test "s 1" "foo .*/x3.cc:15.*" -gdb_test "s 4" ".*20.*" -gdb_test "p data4" "..* = 4" -gdb_test "p common4" "..* = 4" -gdb_test "n" ".*21.*" - -gdb_test "n" "main .*/x1.cc:14.*" -gdb_test "p common1" "..* = 1" -gdb_test "p common2" "..* = 2" -gdb_test "p common3" "..* = 3" - -# Verify that addresses match those in the executable - -gdb_exit -gdb_start -gdb_reinitialize_dir ${srcsubdir} -gdb_load ${binfile} - -set exec_output_data1 [lindex [remote_exec build "${symaddrfile} ${binfile} data1"] 1] -regsub -all "\[\r\n\]" ${exec_output_data1} "" exec_output_data1 - -set exec_output_data2 [lindex [remote_exec build "${symaddrfile} ${binfile} data2"] 1] -regsub -all "\[\r\n\]" ${exec_output_data2} "" exec_output_data2 - -set exec_output_data3 [lindex [remote_exec build "${symaddrfile} ${binfile} data3"] 1] -regsub -all "\[\r\n\]" ${exec_output_data3} "" exec_output_data3 - -set exec_output_data10 [lindex [remote_exec build "${symaddrfile} ${binfile} data10"] 1] -regsub -all "\[\r\n\]" ${exec_output_data10} "" exec_output_data10 - -set exec_output_data11 [lindex [remote_exec build "${symaddrfile} ${binfile} data11"] 1] -regsub -all "\[\r\n\]" ${exec_output_data11} "" exec_output_data11 - -set exec_output_common1 [lindex [remote_exec build "${symaddrfile} ${binfile} common1"] 1] -regsub -all "\[\r\n\]" ${exec_output_common1} "" exec_output_common1 - -set exec_output_common2 [lindex [remote_exec build "${symaddrfile} ${binfile} common2"] 1] -regsub -all "\[\r\n\]" ${exec_output_common2} "" exec_output_common2 - -set exec_output_common3 [lindex [remote_exec build "${symaddrfile} ${binfile} common3"] 1] -regsub -all "\[\r\n\]" ${exec_output_common3} "" exec_output_common3 - -set exec_output_common10 [lindex [remote_exec build "${symaddrfile} ${binfile} common10"] 1] -regsub -all "\[\r\n\]" ${exec_output_common10} "" exec_output_common10 - -set exec_output_common11 [lindex [remote_exec build "${symaddrfile} ${binfile} common11"] 1] -regsub -all "\[\r\n\]" ${exec_output_common11} "" exec_output_common11 - -if [istarget "hppa64-*-*"] { - gdb_test "p &data1" "..* = \\(int \[*\]\\) ${exec_output_data1}" - gdb_test "p &data2" "..* = \\(int \[*\]\\) ${exec_output_data2}" - gdb_test "p &data3" "..* = \\(int \[*\]\\) ${exec_output_data3}" - gdb_test "p &data10" "..* = \\(int \[*\]\\) ${exec_output_data10}" - gdb_test "p &data11" "..* = \\(int \[*\]\\) ${exec_output_data11}" - gdb_test "p &common1" "..* = \\(int \[*\]\\) ${exec_output_common1}" - gdb_test "p &common2" "..* = \\(int \[*\]\\) ${exec_output_common2}" - gdb_test "p &common3" "..* = \\(int \[*\]\\) ${exec_output_common3}" - gdb_test "p &common10" "..* = \\(int \[*\]\\) ${exec_output_common10}" - gdb_test "p &common11" "..* = \\(int \[*\]\\) ${exec_output_common11}" -} else { - gdb_test "p &data1" "..* = \\(int \[*\]\\) 0x${exec_output_data1}" - gdb_test "p &data2" "..* = \\(int \[*\]\\) 0x${exec_output_data2}" - gdb_test "p &data3" "..* = \\(int \[*\]\\) 0x${exec_output_data3}" - gdb_test "p &data10" "..* = \\(int \[*\]\\) 0x${exec_output_data10}" - gdb_test "p &data11" "..* = \\(int \[*\]\\) 0x${exec_output_data11}" - gdb_test "p &common1" "..* = \\(int \[*\]\\) 0x${exec_output_common1}" - gdb_test "p &common2" "..* = \\(int \[*\]\\) 0x${exec_output_common2}" - gdb_test "p &common3" "..* = \\(int \[*\]\\) 0x${exec_output_common3}" - gdb_test "p &common10" "..* = \\(int \[*\]\\) 0x${exec_output_common10}" - gdb_test "p &common11" "..* = \\(int \[*\]\\) 0x${exec_output_common11}" -} diff --git a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg03/x1.cc b/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg03/x1.cc deleted file mode 100644 index 84231b08be..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg03/x1.cc +++ /dev/null @@ -1,15 +0,0 @@ -#include - -extern int foo(); -extern int common3; -extern int data3; -extern int common11; -extern int data11; - -int main() -{ - common11 = 11; - printf("In main: %d %d %d\n", data3, common3, foo(), common11, data11); - - return 0; -} diff --git a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg03/x2.cc b/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg03/x2.cc deleted file mode 100644 index 165cb85d2e..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg03/x2.cc +++ /dev/null @@ -1,7 +0,0 @@ -#include - -int common10; -int common11; - -int data10 = 10; -int data11 = 11; diff --git a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg03/x3.cc b/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg03/x3.cc deleted file mode 100644 index 80d38c75e3..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg03/x3.cc +++ /dev/null @@ -1,21 +0,0 @@ -#include - -int common1; -int common2; -int common3; -static int common4; - -int data1 = 1; -int data2 = 2; -int data3 = 3; -static int data4 = 4; - -int foo() -{ - common1 = 1; - common2 = 2; - common3 = 3; - common4 = 4; - - return data1 + data2 + data3 + data4 + common1 + common2 + common3 + common4; -} diff --git a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg04.exp b/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg04.exp deleted file mode 100644 index 0a98950228..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg04.exp +++ /dev/null @@ -1,66 +0,0 @@ -# Test reading debug information from in object files. - -if { [skip_hp_tests] } { continue } - -if { ![istarget "hppa*-*-hpux*"] } { - verbose "HPUX test ignored for non-hppa targets." - return 0 -} - -set testfile "test" -set srcsubdir ${srcdir}/${subdir}/objdbg04 -set objdbgdir ${objdir}/${subdir}/objdbg04 -set binfile ${objdbgdir}/${testfile} -set toolssubdir ${srcdir}/${subdir}/tools -set symaddrfile ${toolssubdir}/symaddr - -# Create and source the file that provides information about the compiler -# used to compile the test case. -if [get_compiler_info] { - return -1 -} - -if {!$hp_aCC_compiler && !$hp_cc_compiler} { - return 0 -} - -if { [gdb_compile "${toolssubdir}/test-objdbg.cc" "${objdbgdir}/test-objdbg.o" object "debug c++ {additional_flags=-I${toolssubdir} +objdebug}"] != "" } { - untested objdbg04.exp - return -1 -} - -if { [gdb_compile "${srcsubdir}/x1.cc" "${objdbgdir}/x1.o" object "debug c++ {additional_flags=-I${srcsubdir} +objdebug}"] != "" } { - perror "Couldn't compile x1.cc" - return -1 -} - -if { [gdb_compile "${srcsubdir}/x2.cc" "${objdbgdir}/x2.o" object "debug c++ {additional_flags=-I${srcsubdir} +objdebug}"] != "" } { - perror "Couldn't compile x2.cc" - return -1 -} - -if { [gdb_compile "${objdbgdir}/x1.o ${objdbgdir}/x2.o" "${binfile}0" executable "debug c++ {additional_flags=-I${srcsubdir} +objdebug}"] != "" } { - perror "Couldn't compile x1.cc" - return -1 -} - -if { [gdb_compile "${objdbgdir}/x2.o ${objdbgdir}/x1.o" "${binfile}1" executable "debug c++ {additional_flags=-I${srcsubdir} +objdebug}"] != "" } { - perror "Couldn't compile x1.cc" - return -1 -} - -# Test two executables. The first has x1.cc linked first, the second -# has x2.cc linked first. The difference is which COMDAT section was -# picked. - -for {set filenum 0} {$filenum < 2} {incr filenum 1} { - gdb_exit - gdb_start - gdb_reinitialize_dir ${srcsubdir} - gdb_load ${binfile}${filenum} - - gdb_test "ptype Adder" "type = template (class |)Adder {..*T val.*;.*}(.*template instantiations:.*Adder|)" - gdb_test "ptype Adder" "type = (class |)Adder {.*private:.*int val;.*public:.*void set( |)\\(int\\);.*int get( |)\\(void\\);.*int add( |)\\(int\\);.*}" - gdb_test "ptype Adder" "type = template (class |)Adder {..*T val.*;.*}(.*template instantiations:.*Adder|)" - -} diff --git a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg04/x.h b/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg04/x.h deleted file mode 100644 index 9df8ef9855..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg04/x.h +++ /dev/null @@ -1,30 +0,0 @@ -template -class Adder { -public: - void set(T); - T get(); - T add(T); - -private: - T val; -}; - -template -void Adder::set(T new_val) -{ - val = new_val; -} - -template -T Adder::get() -{ - return val; -} - -template -T Adder::add(T new_val) -{ - val += new_val; - return val; -} - diff --git a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg04/x1.cc b/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg04/x1.cc deleted file mode 100644 index 1f284b2ab0..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg04/x1.cc +++ /dev/null @@ -1,15 +0,0 @@ -#include -#include "x.h" - -template class Adder; - -int main() -{ - Adder add; - - add.set(3); - add.add(3); - printf("In main: %d\n", add.get()); - - return 0; -} diff --git a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg04/x2.cc b/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg04/x2.cc deleted file mode 100644 index 29eea75d23..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg04/x2.cc +++ /dev/null @@ -1,3 +0,0 @@ -#include "x.h" - -template class Adder; diff --git a/gdb/testsuite/gdb.hp/gdb.objdbg/tools/symaddr b/gdb/testsuite/gdb.hp/gdb.objdbg/tools/symaddr deleted file mode 100755 index d358e3156b..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.objdbg/tools/symaddr +++ /dev/null @@ -1,8 +0,0 @@ -#!/bin/sh - -# Get the address of a symbol in Hex. -# $1 = object/executable file name -# $2 = symbol name -${srcdir}/gdb.hp/tools/odump -sym "$1" | grep "$2"$ | awk '{print $1}' - -exit 0 diff --git a/gdb/testsuite/gdb.hp/gdb.objdbg/tools/symaddr.pa64 b/gdb/testsuite/gdb.hp/gdb.objdbg/tools/symaddr.pa64 deleted file mode 100755 index 4f3c8db58a..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.objdbg/tools/symaddr.pa64 +++ /dev/null @@ -1,8 +0,0 @@ -#!/bin/sh - -# Get the address of a symbol in Hex. -# $1 = object/executable file name -# $2 = symbol name -/usr/ccs/bin/elfdump -t +s .symtab "$1" | grep "$2"$ | awk '{print $6}' - -exit 0 diff --git a/gdb/testsuite/gdb.hp/gdb.objdbg/tools/test-objdbg.cc b/gdb/testsuite/gdb.hp/gdb.objdbg/tools/test-objdbg.cc deleted file mode 100644 index f8b643afbf..0000000000 --- a/gdb/testsuite/gdb.hp/gdb.objdbg/tools/test-objdbg.cc +++ /dev/null @@ -1,4 +0,0 @@ -int main() -{ - return 0; -} diff --git a/gdb/testsuite/gdb.hp/tools/odump b/gdb/testsuite/gdb.hp/tools/odump deleted file mode 100755 index c96abed64d..0000000000 --- a/gdb/testsuite/gdb.hp/tools/odump +++ /dev/null @@ -1,7 +0,0 @@ -#!/bin/ksh - -# First source /app/appserver -. /app/appserver - -# Exec the executable. -exec $APPROOT/usr/contrib/bin/$(basename $0) "$@" -- 2.34.1