From afd3097320ebf472a2f3d3df5587832092911a06 Mon Sep 17 00:00:00 2001 From: Hans-Peter Nilsson Date: Wed, 31 Oct 2001 02:40:19 +0000 Subject: [PATCH] * mmix-dis.c, mmix-opc.c: New files. --- opcodes/mmix-dis.c | 523 +++++++++++++++++++++++++++++++++++++++++++++ opcodes/mmix-opc.c | 340 +++++++++++++++++++++++++++++ 2 files changed, 863 insertions(+) create mode 100644 opcodes/mmix-dis.c create mode 100644 opcodes/mmix-opc.c diff --git a/opcodes/mmix-dis.c b/opcodes/mmix-dis.c new file mode 100644 index 0000000000..c81e679f4e --- /dev/null +++ b/opcodes/mmix-dis.c @@ -0,0 +1,523 @@ +/* mmix-dis.c -- Disassemble MMIX instructions. + Copyright (C) 2000, 2001 Free Software Foundation, Inc. + Written by Hans-Peter Nilsson (hp@bitrange.com) + +This file is part of GDB and the GNU binutils. + +GDB and the GNU binutils are free software; you can redistribute +them and/or modify them under the terms of the GNU General Public +License as published by the Free Software Foundation; either version 2, +or (at your option) any later version. + +GDB and the GNU binutils are distributed in the hope that they +will be useful, but WITHOUT ANY WARRANTY; without even the implied +warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See +the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this file; see the file COPYING. If not, write to the Free +Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#include +#include +#include +#include "opcode/mmix.h" +#include "dis-asm.h" +#include "libiberty.h" +#include "bfd.h" +#include "opintl.h" + +#define BAD_CASE(x) \ + do \ + { \ + fprintf (stderr, \ + _("Bad case %d (%s) in %s:%d\n"), \ + x, #x, __FILE__, __LINE__); \ + abort (); \ + } \ + while (0) + +#define FATAL_DEBUG \ + do \ + { \ + fprintf (stderr, \ + _("Internal: Non-debugged code (test-case missing): %s:%d"), \ + __FILE__, __LINE__); \ + abort (); \ + } \ + while (0) + +#define ROUND_MODE(n) \ + ((n) == 1 ? "ROUND_OFF" : (n) == 2 ? "ROUND_UP" : \ + (n) == 3 ? "ROUND_DOWN" : (n) == 4 ? "ROUND_NEAR" : \ + _("(unknown)")) + +#define INSN_IMMEDIATE_BIT (IMM_OFFSET_BIT << 24) +#define INSN_BACKWARD_OFFSET_BIT (1 << 24) + +struct mmix_dis_info + { + const char *reg_name[256]; + const char *spec_reg_name[32]; + + /* Waste a little memory so we don't have to allocate each separately. + We could have an array with static contents for these, but on the + other hand, we don't have to. */ + char basic_reg_name[256][sizeof ("$255")]; + }; + +static boolean initialize_mmix_dis_info PARAMS ((struct disassemble_info *)); +static const struct mmix_opcode *get_opcode PARAMS ((unsigned long)); + + +/* Initialize a target-specific array in INFO. */ + +static boolean +initialize_mmix_dis_info (info) + struct disassemble_info *info; +{ + struct mmix_dis_info *minfop = malloc (sizeof (struct mmix_dis_info)); + int i; + + if (minfop == NULL) + return false; + + memset (minfop, 0, sizeof (*minfop)); + + /* Initialize register names from register symbols. If there's no + register section, then there are no register symbols. */ + if ((info->section != NULL && info->section->owner != NULL) + || (info->symbols != NULL + && info->symbols[0] != NULL + && bfd_asymbol_bfd (info->symbols[0]) != NULL)) + { + bfd *abfd = info->section && info->section->owner != NULL + ? info->section->owner + : bfd_asymbol_bfd (info->symbols[0]); + asection *reg_section = bfd_get_section_by_name (abfd, "*REG*"); + + if (reg_section != NULL) + { + /* The returned symcount *does* include the ending NULL. */ + long symsize = bfd_get_symtab_upper_bound (abfd); + asymbol **syms = malloc (symsize); + long nsyms; + long i; + + if (syms == NULL) + { FATAL_DEBUG; + free (minfop); + return false; + } + nsyms = bfd_canonicalize_symtab (abfd, syms); + + /* We use the first name for a register. If this is MMO, then + it's the name with the first sequence number, presumably the + first in the source. */ + for (i = 0; i < nsyms && syms[i] != NULL; i++) + { + if (syms[i]->section == reg_section + && syms[i]->value < 256 + && minfop->reg_name[syms[i]->value] == NULL) + minfop->reg_name[syms[i]->value] = syms[i]->name; + } + } + } + + /* Fill in the rest with the canonical names. */ + for (i = 0; i < 256; i++) + if (minfop->reg_name[i] == NULL) + { + sprintf (minfop->basic_reg_name[i], "$%d", i); + minfop->reg_name[i] = minfop->basic_reg_name[i]; + } + + /* We assume it's actually a one-to-one mapping of number-to-name. */ + for (i = 0; mmix_spec_regs[i].name != NULL; i++) + minfop->spec_reg_name[mmix_spec_regs[i].number] = mmix_spec_regs[i].name; + + info->private_data = (PTR) minfop; + return true; +} + +/* A table indexed by the first byte is constructed as we disassemble each + tetrabyte. The contents is a pointer into mmix_insns reflecting the + first found entry with matching match-bits and lose-bits. Further + entries are considered one after one until the operand constraints + match or the match-bits and lose-bits do not match. Normally a + "further entry" will just show that there was no other match. */ + +static const struct mmix_opcode * +get_opcode (insn) + unsigned long insn; +{ + static const struct mmix_opcode **opcodes = NULL; + const struct mmix_opcode *opcodep = mmix_opcodes; + unsigned int opcode_part = (insn >> 24) & 255; + if (opcodes == NULL) + opcodes = xcalloc (256, sizeof (struct mmix_opcode *)); + + opcodep = opcodes[opcode_part]; + if (opcodep == NULL + || (opcodep->match & insn) != opcodep->match + || (opcodep->lose & insn) != 0) + { + /* Search through the table. */ + for (opcodep = mmix_opcodes; opcodep->name != NULL; opcodep++) + { + /* FIXME: Break out this into an initialization function. */ + if ((opcodep->match & (opcode_part << 24)) == opcode_part + && (opcodep->lose & (opcode_part << 24)) == 0) + opcodes[opcode_part] = opcodep; + + if ((opcodep->match & insn) == opcodep->match + && (opcodep->lose & insn) == 0) + break; + } + } + + if (opcodep->name == NULL) + return NULL; + + /* Check constraints. If they don't match, loop through the next opcode + entries. */ + do + { + switch (opcodep->operands) + { + /* These have no restraint on what can be in the lower three + bytes. */ + case mmix_operands_regs: + case mmix_operands_reg_yz: + case mmix_operands_regs_z_opt: + case mmix_operands_regs_z: + case mmix_operands_jmp: + case mmix_operands_pushgo: + case mmix_operands_pop: + case mmix_operands_sync: + case mmix_operands_x_regs_z: + case mmix_operands_neg: + case mmix_operands_pushj: + case mmix_operands_regaddr: + case mmix_operands_get: + case mmix_operands_set: + case mmix_operands_save: + case mmix_operands_unsave: + case mmix_operands_xyz_opt: + return opcodep; + + /* For a ROUND_MODE, the middle byte must be 0..4. */ + case mmix_operands_roundregs_z: + case mmix_operands_roundregs: + { + int midbyte = (insn >> 8) & 255; + if (midbyte <= 4) + return opcodep; + } + break; + + case mmix_operands_put: + /* A "PUT". If it is "immediate", then no restrictions, + otherwise we have to make sure the register number is < 32. */ + if ((insn & INSN_IMMEDIATE_BIT) + || ((insn >> 16) & 255) < 32) + return opcodep; + break; + + case mmix_operands_resume: + /* Middle bytes must be zero. */ + if ((insn & 0x00ffff00) == 0) + return opcodep; + break; + + default: + BAD_CASE (opcodep->operands); + } + + opcodep++; + } + while ((opcodep->match & insn) == opcodep->match + && (opcodep->lose & insn) == 0); + + /* If we got here, we had no match. */ + return NULL; +} + +/* The main disassembly function. */ + +int +print_insn_mmix (memaddr, info) + bfd_vma memaddr; + struct disassemble_info *info; +{ + unsigned char buffer[4]; + unsigned long insn; + unsigned int x, y, z; + const struct mmix_opcode *opcodep; + int status = (*info->read_memory_func) (memaddr, buffer, 4, info); + struct mmix_dis_info *minfop; + + if (status != 0) + { + (*info->memory_error_func) (status, memaddr, info); + return -1; + } + + /* FIXME: Is -1 suitable? */ + if (info->private_data == NULL + && ! initialize_mmix_dis_info (info)) + return -1; + + minfop = (struct mmix_dis_info *) info->private_data; + x = buffer[1]; + y = buffer[2]; + z = buffer[3]; + + insn = bfd_getb32 (buffer); + + opcodep = get_opcode (insn); + + if (opcodep == NULL) + { + (*info->fprintf_func) (info->stream, _("*unknown*")); + return 4; + } + + (*info->fprintf_func) (info->stream, "%s ", opcodep->name); + + /* Present bytes in the order they are laid out in memory. */ + info->display_endian = BFD_ENDIAN_BIG; + + info->insn_info_valid = 1; + info->bytes_per_chunk = 4; + info->branch_delay_insns = 0; + info->target = 0; + switch (opcodep->type) + { + case mmix_type_normal: + case mmix_type_memaccess_block: + info->insn_type = dis_nonbranch; + break; + + case mmix_type_branch: + info->insn_type = dis_branch; + break; + + case mmix_type_condbranch: + info->insn_type = dis_condbranch; + break; + + case mmix_type_memaccess_octa: + info->insn_type = dis_dref; + info->data_size = 8; + break; + + case mmix_type_memaccess_tetra: + info->insn_type = dis_dref; + info->data_size = 4; + break; + + case mmix_type_memaccess_wyde: + info->insn_type = dis_dref; + info->data_size = 2; + break; + + case mmix_type_memaccess_byte: + info->insn_type = dis_dref; + info->data_size = 1; + break; + + case mmix_type_jsr: + info->insn_type = dis_jsr; + break; + + default: + BAD_CASE(opcodep->type); + } + + switch (opcodep->operands) + { + case mmix_operands_regs: + /* All registers: "$X,$Y,$Z". */ + (*info->fprintf_func) (info->stream, "%s,%s,%s", + minfop->reg_name[x], + minfop->reg_name[y], + minfop->reg_name[z]); + break; + + case mmix_operands_reg_yz: + /* Like SETH - "$X,YZ". */ + (*info->fprintf_func) (info->stream, "%s,0x%x", + minfop->reg_name[x], y * 256 + z); + break; + + case mmix_operands_regs_z_opt: + case mmix_operands_regs_z: + case mmix_operands_pushgo: + /* The regular "$X,$Y,$Z|Z". */ + if (insn & INSN_IMMEDIATE_BIT) + (*info->fprintf_func) (info->stream, "%s,%s,%d", + minfop->reg_name[x], minfop->reg_name[y], z); + else + (*info->fprintf_func) (info->stream, "%s,%s,%s", + minfop->reg_name[x], + minfop->reg_name[y], + minfop->reg_name[z]); + break; + + case mmix_operands_jmp: + /* Address; only JMP. */ + { + bfd_signed_vma offset = (x * 65536 + y * 256 + z) * 4; + + if (insn & INSN_BACKWARD_OFFSET_BIT) + offset -= (256 * 65536) * 4; + + info->target = memaddr + offset; + (*info->print_address_func) (memaddr + offset, info); + } + break; + + case mmix_operands_roundregs_z: + /* Two registers, like FLOT, possibly with rounding: "$X,$Z|Z" + "$X,ROUND_MODE,$Z|Z". */ + if (y != 0) + { + if (insn & INSN_IMMEDIATE_BIT) + (*info->fprintf_func) (info->stream, "%s,%s,%d", + minfop->reg_name[x], + ROUND_MODE (y), z); + else + (*info->fprintf_func) (info->stream, "%s,%s,%s", + minfop->reg_name[x], + ROUND_MODE (y), + minfop->reg_name[z]); + } + else + { + if (insn & INSN_IMMEDIATE_BIT) + (*info->fprintf_func) (info->stream, "%s,%d", + minfop->reg_name[x], z); + else + (*info->fprintf_func) (info->stream, "%s,%s", + minfop->reg_name[x], + minfop->reg_name[z]); + } + break; + + case mmix_operands_pop: + /* Like POP - "X,YZ". */ + (*info->fprintf_func) (info->stream, "%d,%d", x, y*256 + z); + break; + + case mmix_operands_roundregs: + /* Two registers, possibly with rounding: "$X,$Z" or + "$X,ROUND_MODE,$Z". */ + if (y != 0) + (*info->fprintf_func) (info->stream, "%s,%s,%s", + minfop->reg_name[x], + ROUND_MODE (y), + minfop->reg_name[z]); + else + (*info->fprintf_func) (info->stream, "%s,%s", + minfop->reg_name[x], + minfop->reg_name[z]); + break; + + case mmix_operands_sync: + /* Like SYNC - "XYZ". */ + (*info->fprintf_func) (info->stream, "%u", + x * 65536 + y * 256 + z); + break; + + case mmix_operands_x_regs_z: + /* Like SYNCD - "X,$Y,$Z|Z". */ + if (insn & INSN_IMMEDIATE_BIT) + (*info->fprintf_func) (info->stream, "%d,%s,%d", + x, minfop->reg_name[y], z); + else + (*info->fprintf_func) (info->stream, "%d,%s,%s", + x, minfop->reg_name[y], + minfop->reg_name[z]); + break; + + case mmix_operands_neg: + /* Like NEG and NEGU - "$X,Y,$Z|Z". */ + if (insn & INSN_IMMEDIATE_BIT) + (*info->fprintf_func) (info->stream, "%s,%d,%d", + minfop->reg_name[x], y, z); + else + (*info->fprintf_func) (info->stream, "%s,%d,%s", + minfop->reg_name[x], y, + minfop->reg_name[z]); + break; + + case mmix_operands_pushj: + case mmix_operands_regaddr: + /* Like GETA or branches - "$X,Address". */ + { + bfd_signed_vma offset = (y * 256 + z) * 4; + + if (insn & INSN_BACKWARD_OFFSET_BIT) + offset -= 65536 * 4; + + info->target = memaddr + offset; + + (*info->fprintf_func) (info->stream, "%s,", minfop->reg_name[x]); + (*info->print_address_func) (memaddr + offset, info); + } + break; + + case mmix_operands_get: + /* GET - "X,spec_reg". */ + (*info->fprintf_func) (info->stream, "%s,%s", + minfop->reg_name[x], + minfop->spec_reg_name[z]); + break; + + case mmix_operands_put: + /* PUT - "spec_reg,$Z|Z". */ + if (insn & INSN_IMMEDIATE_BIT) + (*info->fprintf_func) (info->stream, "%s,%d", + minfop->spec_reg_name[x], z); + else + (*info->fprintf_func) (info->stream, "%s,%s", + minfop->spec_reg_name[x], + minfop->reg_name[z]); + break; + + case mmix_operands_set: + /* Two registers, "$X,$Y". */ + (*info->fprintf_func) (info->stream, "%s,%s", + minfop->reg_name[x], + minfop->reg_name[y]); + break; + + case mmix_operands_save: + /* SAVE - "$X,0". */ + (*info->fprintf_func) (info->stream, "%s,0", minfop->reg_name[x]); + break; + + case mmix_operands_unsave: + /* UNSAVE - "0,$Z". */ + (*info->fprintf_func) (info->stream, "0,%s", minfop->reg_name[z]); + break; + + case mmix_operands_xyz_opt: + /* Like SWYM or TRAP - "X,Y,Z". */ + (*info->fprintf_func) (info->stream, "%d,%d,%d", x, y, z); + break; + + case mmix_operands_resume: + /* Just "Z", like RESUME. */ + (*info->fprintf_func) (info->stream, "%d", z); + break; + + default: + (*info->fprintf_func) (info->stream, _("*unknown operands type: %d*"), + opcodep->operands); + break; + } + + return 4; +} diff --git a/opcodes/mmix-opc.c b/opcodes/mmix-opc.c new file mode 100644 index 0000000000..76dc5d8745 --- /dev/null +++ b/opcodes/mmix-opc.c @@ -0,0 +1,340 @@ +/* mmix-opc.c -- MMIX opcode table + Copyright (C) 2001 Free Software Foundation, Inc. + Written by Hans-Peter Nilsson (hp@bitrange.com) + +This file is part of GDB, GAS, and the GNU binutils. + +GDB, GAS, and the GNU binutils are free software; you can redistribute +them and/or modify them under the terms of the GNU General Public +License as published by the Free Software Foundation; either version 2, +or (at your option) any later version. + +GDB, GAS, and the GNU binutils are distributed in the hope that they +will be useful, but WITHOUT ANY WARRANTY; without even the implied +warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See +the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this file; see the file COPYING. If not, write to the Free +Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#include +#include "opcode/mmix.h" +#include "symcat.h" + +/* Register-name-table for special registers. */ +const struct mmix_spec_reg mmix_spec_regs[] = + { + /* Keep rJ at top; it's the most frequently used one. */ + {"rJ", 4}, + {"rA", 21}, + {"rB", 0}, + {"rC", 8}, + {"rD", 1}, + {"rE", 2}, + {"rF", 22}, + {"rG", 19}, + {"rH", 3}, + {"rI", 12}, + {"rK", 15}, + {"rL", 20}, + {"rM", 5}, + {"rN", 9}, + {"rO", 10}, + {"rP", 23}, + {"rQ", 16}, + {"rR", 6}, + {"rS", 11}, + {"rT", 13}, + {"rU", 17}, + {"rV", 18}, + {"rW", 24}, + {"rX", 25}, + {"rY", 26}, + {"rZ", 27}, + {"rBB", 7}, + {"rTT", 14}, + {"rWW", 28}, + {"rXX", 29}, + {"rYY", 30}, + {"rZZ", 31}, + {NULL, 0} + }; + +/* Opcode-table. In order to cut down on redundant contents, we use helper + macros. */ + +/* All bits in the opcode-byte are significant. Add "| ..." expressions + to add zero-bits. */ +#undef O +#define O(m) ((m) << 24), ((~(m) & 255) << 24) + +/* Bits 7..1 of the opcode are significant. */ +#undef Z +#define Z(m) ((m) << 24), ((~(m) & 254) << 24) + +/* For easier overview of the table. */ +#define N mmix_type_normal +#define B mmix_type_branch +#define C mmix_type_condbranch +#define MB mmix_type_memaccess_byte +#define MW mmix_type_memaccess_wyde +#define MT mmix_type_memaccess_tetra +#define MO mmix_type_memaccess_octa +#define M mmix_type_memaccess_block +#define J mmix_type_jsr +#define P mmix_type_pseudo + +#define OP(y) XCONCAT2 (mmix_operands_,y) + +/* Groups of instructions specified here must, if all are matching the + same instruction, be consecutive, in order more-specific to + less-specific match. */ + +const struct mmix_opcode mmix_opcodes[] = + { + {"trap", O (0), OP (xyz_opt), J}, + {"fcmp", O (1), OP (regs), N}, + {"flot", Z (8), OP (roundregs_z), N}, + + {"fun", O (2), OP (regs), N}, + {"feql", O (3), OP (regs), N}, + {"flotu", Z (10), OP (roundregs_z), N}, + + {"fadd", O (4), OP (regs), N}, + {"fix", O (5), OP (roundregs), N}, + {"sflot", Z (12), OP (roundregs_z), N}, + + {"fsub", O (6), OP (regs), N}, + {"fixu", O (7), OP (roundregs), N}, + {"sflotu", Z (14), OP (roundregs_z), N}, + + {"fmul", O (16), OP (regs), N}, + {"fcmpe", O (17), OP (regs), N}, + {"mul", Z (24), OP (regs_z), N}, + + {"fune", O (18), OP (regs), N}, + {"feqle", O (19), OP (regs), N}, + {"mulu", Z (26), OP (regs_z), N}, + + {"fdiv", O (20), OP (regs), N}, + {"fsqrt", O (21), OP (roundregs), N}, + {"div", Z (28), OP (regs_z), N}, + + {"frem", O (22), OP (regs), N}, + {"fint", O (23), OP (roundregs), N}, + {"divu", Z (30), OP (regs_z), N}, + + {"add", Z (0x20), OP (regs_z), N}, + {"2addu", Z (0x28), OP (regs_z), N}, + + {"addu", Z (0x22), OP (regs_z), N}, + /* Synonym for ADDU. Put after ADDU, since we don't prefer it for + disassembly. It's supposed to be used for addresses, so we make it + a memory block reference for purposes of assembly. */ + {"lda", Z (0x22), OP (regs_z_opt), M}, + {"4addu", Z (0x2a), OP (regs_z), N}, + + {"sub", Z (0x24), OP (regs_z), N}, + {"8addu", Z (0x2c), OP (regs_z), N}, + + {"subu", Z (0x26), OP (regs_z), N}, + {"16addu", Z (0x2e), OP (regs_z), N}, + + {"cmp", Z (0x30), OP (regs_z), N}, + {"sl", Z (0x38), OP (regs_z), N}, + + {"cmpu", Z (0x32), OP (regs_z), N}, + {"slu", Z (0x3a), OP (regs_z), N}, + + {"neg", Z (0x34), OP (neg), N}, + {"sr", Z (0x3c), OP (regs_z), N}, + + {"negu", Z (0x36), OP (neg), N}, + {"sru", Z (0x3e), OP (regs_z), N}, + + {"bn", Z (0x40), OP (regaddr), C}, + {"bnn", Z (0x48), OP (regaddr), C}, + + {"bz", Z (0x42), OP (regaddr), C}, + {"bnz", Z (0x4a), OP (regaddr), C}, + + {"bp", Z (0x44), OP (regaddr), C}, + {"bnp", Z (0x4c), OP (regaddr), C}, + + {"bod", Z (0x46), OP (regaddr), C}, + {"bev", Z (0x4e), OP (regaddr), C}, + + {"pbn", Z (0x50), OP (regaddr), C}, + {"pbnn", Z (0x58), OP (regaddr), C}, + + {"pbz", Z (0x52), OP (regaddr), C}, + {"pbnz", Z (0x5a), OP (regaddr), C}, + + {"pbp", Z (0x54), OP (regaddr), C}, + {"pbnp", Z (0x5c), OP (regaddr), C}, + + {"pbod", Z (0x56), OP (regaddr), C}, + {"pbev", Z (0x5e), OP (regaddr), C}, + + {"csn", Z (0x60), OP (regs_z), N}, + {"csnn", Z (0x68), OP (regs_z), N}, + + {"csz", Z (0x62), OP (regs_z), N}, + {"csnz", Z (0x6a), OP (regs_z), N}, + + {"csp", Z (0x64), OP (regs_z), N}, + {"csnp", Z (0x6c), OP (regs_z), N}, + + {"csod", Z (0x66), OP (regs_z), N}, + {"csev", Z (0x6e), OP (regs_z), N}, + + {"zsn", Z (0x70), OP (regs_z), N}, + {"zsnn", Z (0x78), OP (regs_z), N}, + + {"zsz", Z (0x72), OP (regs_z), N}, + {"zsnz", Z (0x7a), OP (regs_z), N}, + + {"zsp", Z (0x74), OP (regs_z), N}, + {"zsnp", Z (0x7c), OP (regs_z), N}, + + {"zsod", Z (0x76), OP (regs_z), N}, + {"zsev", Z (0x7e), OP (regs_z), N}, + + {"ldb", Z (0x80), OP (regs_z_opt), MB}, + {"ldt", Z (0x88), OP (regs_z_opt), MT}, + + {"ldbu", Z (0x82), OP (regs_z_opt), MB}, + {"ldtu", Z (0x8a), OP (regs_z_opt), MT}, + + {"ldw", Z (0x84), OP (regs_z_opt), MW}, + {"ldo", Z (0x8c), OP (regs_z_opt), MO}, + + {"ldwu", Z (0x86), OP (regs_z_opt), MW}, + {"ldou", Z (0x8e), OP (regs_z_opt), MO}, + + {"ldsf", Z (0x90), OP (regs_z_opt), MT}, + + /* This doesn't seem to access memory, just the TLB. */ + {"ldvts", Z (0x98), OP (regs_z_opt), M}, + + {"ldht", Z (0x92), OP (regs_z_opt), MT}, + + /* Neither does this per-se. */ + {"preld", Z (0x9a), OP (x_regs_z), N}, + + {"cswap", Z (0x94), OP (regs_z_opt), MO}, + {"prego", Z (0x9c), OP (x_regs_z), N}, + + {"ldunc", Z (0x96), OP (regs_z_opt), MO}, + {"go", Z (0x9e), OP (regs_z_opt), B}, + + {"stb", Z (0xa0), OP (regs_z_opt), MB}, + {"stt", Z (0xa8), OP (regs_z_opt), MT}, + + {"stbu", Z (0xa2), OP (regs_z_opt), MB}, + {"sttu", Z (0xaa), OP (regs_z_opt), MT}, + + {"stw", Z (0xa4), OP (regs_z_opt), MW}, + {"sto", Z (0xac), OP (regs_z_opt), MO}, + + {"stwu", Z (0xa6), OP (regs_z_opt), MW}, + {"stou", Z (0xae), OP (regs_z_opt), MO}, + + {"stsf", Z (0xb0), OP (regs_z_opt), MT}, + {"syncd", Z (0xb8), OP (x_regs_z), M}, + + {"stht", Z (0xb2), OP (regs_z_opt), MT}, + {"prest", Z (0xba), OP (x_regs_z), M}, + + {"stco", Z (0xb4), OP (x_regs_z), MO}, + {"syncid", Z (0xbc), OP (x_regs_z), M}, + + {"stunc", Z (0xb6), OP (regs_z_opt), MO}, + {"pushgo", Z (0xbe), OP (pushgo), J}, + + /* Synonym for OR with a zero Z. */ + {"set", O (0xc1) + | 0xff, OP (set), N}, + + {"or", Z (0xc0), OP (regs_z), N}, + {"and", Z (0xc8), OP (regs_z), N}, + + {"orn", Z (0xc2), OP (regs_z), N}, + {"andn", Z (0xca), OP (regs_z), N}, + + {"nor", Z (0xc4), OP (regs_z), N}, + {"nand", Z (0xcc), OP (regs_z), N}, + + {"xor", Z (0xc6), OP (regs_z), N}, + {"nxor", Z (0xce), OP (regs_z), N}, + + {"bdif", Z (0xd0), OP (regs_z), N}, + {"mux", Z (0xd8), OP (regs_z), N}, + + {"wdif", Z (0xd2), OP (regs_z), N}, + {"sadd", Z (0xda), OP (regs_z), N}, + + {"tdif", Z (0xd4), OP (regs_z), N}, + {"mor", Z (0xdc), OP (regs_z), N}, + + {"odif", Z (0xd6), OP (regs_z), N}, + {"mxor", Z (0xde), OP (regs_z), N}, + + {"seth", O (0xe0), OP (reg_yz), N}, + {"setmh", O (0xe1), OP (reg_yz), N}, + {"orh", O (0xe8), OP (reg_yz), N}, + {"ormh", O (0xe9), OP (reg_yz), N}, + + {"setml", O (0xe2), OP (reg_yz), N}, + {"setl", O (0xe3), OP (reg_yz), N}, + {"orml", O (0xea), OP (reg_yz), N}, + {"orl", O (0xeb), OP (reg_yz), N}, + + {"inch", O (0xe4), OP (reg_yz), N}, + {"incmh", O (0xe5), OP (reg_yz), N}, + {"andnh", O (0xec), OP (reg_yz), N}, + {"andnmh", O (0xed), OP (reg_yz), N}, + + {"incml", O (0xe6), OP (reg_yz), N}, + {"incl", O (0xe7), OP (reg_yz), N}, + {"andnml", O (0xee), OP (reg_yz), N}, + {"andnl", O (0xef), OP (reg_yz), N}, + + {"jmp", Z (0xf0), OP (jmp), B}, + {"pop", O (0xf8), OP (pop), B}, + {"resume", O (0xf9) + | 0xffff00, OP (resume), B}, + + {"pushj", Z (0xf2), OP (pushj), J}, + {"save", O (0xfa) + | 0xffff, OP (save), M}, + {"unsave", O (0xfb) + | 0xffff00, OP (unsave), M}, + + {"geta", Z (0xf4), OP (regaddr), N}, + {"sync", O (0xfc), OP (sync), N}, + {"swym", O (0xfd), OP (xyz_opt), N}, + + {"put", Z (0xf6) | 0xff00, OP (put), N}, + {"get", O (0xfe) | 0xffe0, OP (get), N}, + {"trip", O (0xff), OP (xyz_opt), J}, + + /* We have mmixal pseudos in the ordinary instruction table so we can + avoid the "set" vs. ".set" ambiguity that would be the effect if we + had pseudos handled "normally" and defined NO_PSEUDO_DOT. + + Note that IS and GREG are handled fully by md_start_line_hook, so + they're not here. */ + {"loc", ~0, ~0, OP (loc), P}, + {"prefix", ~0, ~0, OP (prefix), P}, + {"byte", ~0, ~0, OP (byte), P}, + {"wyde", ~0, ~0, OP (wyde), P}, + {"tetra", ~0, ~0, OP (tetra), P}, + {"octa", ~0, ~0, OP (octa), P}, + {"local", ~0, ~0, OP (local), P}, + {"bspec", ~0, ~0, OP (bspec), P}, + {"espec", ~0, ~0, OP (espec), P}, + + {NULL, ~0, ~0, OP (none), N} + }; -- 2.34.1