From 22be3fbeaccf50e3c0f58d0f7e9f7ed77effeaab Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Sat, 9 Jan 2016 04:00:53 -0500 Subject: [PATCH] sim: drop --enable-sim-cflags option No other sub directory provides such a configuration option, so drop it from the sim dir as well. This cleans up a good bit of code in the process. If people want to use custom flags for just the sim, they can still run configure+make by hand in the sim subdir and use the normal CFLAGS settings. --- sim/aarch64/ChangeLog | 4 ++++ sim/aarch64/configure | 25 ++----------------------- sim/arm/ChangeLog | 4 ++++ sim/arm/configure | 25 ++----------------------- sim/avr/ChangeLog | 4 ++++ sim/avr/configure | 25 ++----------------------- sim/bfin/ChangeLog | 4 ++++ sim/bfin/configure | 25 ++----------------------- sim/common/ChangeLog | 7 +++++++ sim/common/Make-common.in | 2 -- sim/common/Makefile.in | 3 +-- sim/common/acinclude.m4 | 15 --------------- sim/cr16/ChangeLog | 4 ++++ sim/cr16/configure | 25 ++----------------------- sim/cris/ChangeLog | 4 ++++ sim/cris/configure | 25 ++----------------------- sim/d10v/ChangeLog | 4 ++++ sim/d10v/configure | 25 ++----------------------- sim/erc32/ChangeLog | 4 ++++ sim/erc32/configure | 25 ++----------------------- sim/frv/ChangeLog | 4 ++++ sim/frv/configure | 25 ++----------------------- sim/ft32/ChangeLog | 4 ++++ sim/ft32/configure | 25 ++----------------------- sim/h8300/ChangeLog | 4 ++++ sim/h8300/configure | 25 ++----------------------- sim/iq2000/ChangeLog | 4 ++++ sim/iq2000/configure | 25 ++----------------------- sim/lm32/ChangeLog | 4 ++++ sim/lm32/configure | 25 ++----------------------- sim/m32c/ChangeLog | 4 ++++ sim/m32c/configure | 25 ++----------------------- sim/m32r/ChangeLog | 4 ++++ sim/m32r/configure | 25 ++----------------------- sim/m68hc11/ChangeLog | 4 ++++ sim/m68hc11/configure | 25 ++----------------------- sim/mcore/ChangeLog | 4 ++++ sim/mcore/configure | 25 ++----------------------- sim/microblaze/ChangeLog | 4 ++++ sim/microblaze/configure | 25 ++----------------------- sim/mips/ChangeLog | 4 ++++ sim/mips/configure | 25 ++----------------------- sim/mn10300/ChangeLog | 4 ++++ sim/mn10300/configure | 25 ++----------------------- sim/moxie/ChangeLog | 6 ++++++ sim/moxie/Makefile.in | 2 +- sim/moxie/configure | 25 ++----------------------- sim/msp430/ChangeLog | 4 ++++ sim/msp430/configure | 25 ++----------------------- sim/ppc/ChangeLog | 9 +++++++++ sim/ppc/INSTALL | 36 ++---------------------------------- sim/ppc/Makefile.in | 7 +++---- sim/ppc/configure | 19 ------------------- sim/ppc/configure.ac | 13 ------------- sim/rl78/ChangeLog | 4 ++++ sim/rl78/configure | 25 ++----------------------- sim/rx/ChangeLog | 4 ++++ sim/rx/configure | 25 ++----------------------- sim/sh/ChangeLog | 4 ++++ sim/sh/configure | 25 ++----------------------- sim/sh64/ChangeLog | 4 ++++ sim/sh64/configure | 25 ++----------------------- sim/testsuite/ChangeLog | 4 ++++ sim/testsuite/configure | 5 ----- sim/v850/ChangeLog | 4 ++++ sim/v850/configure | 25 ++----------------------- 66 files changed, 191 insertions(+), 716 deletions(-) diff --git a/sim/aarch64/ChangeLog b/sim/aarch64/ChangeLog index 134a82fcb2..ea7208dca5 100644 --- a/sim/aarch64/ChangeLog +++ b/sim/aarch64/ChangeLog @@ -1,3 +1,7 @@ +2016-01-10 Mike Frysinger + + * configure: Regenerate. + 2016-01-09 Mike Frysinger * config.in, configure: Regenerate. diff --git a/sim/aarch64/configure b/sim/aarch64/configure index 52f152e70e..d92fd061c1 100755 --- a/sim/aarch64/configure +++ b/sim/aarch64/configure @@ -608,7 +608,6 @@ sim_profile sim_trace sim_stdio sim_debug -sim_cflags MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -751,7 +750,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_cflags enable_sim_debug enable_sim_stdio enable_sim_trace @@ -1401,8 +1399,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-cflags=opts - Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim itself) --enable-sim-stdio Specify whether to use stdio for console @@ -12861,7 +12857,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12864 "configure" +#line 12860 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12967,7 +12963,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12970 "configure" +#line 12966 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -13235,23 +13231,6 @@ fi -# Check whether --enable-sim-cflags was given. -if test "${enable_sim_cflags+set}" = set; then : - enableval=$enable_sim_cflags; case "${enableval}" in - yes) sim_cflags="-O2 -fomit-frame-pointer";; - trace) as_fn_error "\"Please use --enable-sim-debug instead.\"" "$LINENO" 5; sim_cflags="";; - no) sim_cflags="";; - *) sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;; -esac -if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then - echo "Setting sim cflags = $sim_cflags" 6>&1 -fi -else - sim_cflags="" -fi - - - # Check whether --enable-sim-debug was given. if test "${enable_sim_debug+set}" = set; then : enableval=$enable_sim_debug; case "${enableval}" in diff --git a/sim/arm/ChangeLog b/sim/arm/ChangeLog index f90d727f4e..c92ad02d7b 100644 --- a/sim/arm/ChangeLog +++ b/sim/arm/ChangeLog @@ -1,3 +1,7 @@ +2016-01-10 Mike Frysinger + + * configure: Regenerate. + 2016-01-09 Mike Frysinger * config.in, configure: Regenerate. diff --git a/sim/arm/configure b/sim/arm/configure index 87674c4fe5..027cd01149 100755 --- a/sim/arm/configure +++ b/sim/arm/configure @@ -608,7 +608,6 @@ sim_profile sim_trace sim_stdio sim_debug -sim_cflags MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -751,7 +750,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_cflags enable_sim_debug enable_sim_stdio enable_sim_trace @@ -1401,8 +1399,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-cflags=opts - Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim itself) --enable-sim-stdio Specify whether to use stdio for console @@ -12861,7 +12857,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12864 "configure" +#line 12860 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12967,7 +12963,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12970 "configure" +#line 12966 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -13235,23 +13231,6 @@ fi -# Check whether --enable-sim-cflags was given. -if test "${enable_sim_cflags+set}" = set; then : - enableval=$enable_sim_cflags; case "${enableval}" in - yes) sim_cflags="-O2 -fomit-frame-pointer";; - trace) as_fn_error "\"Please use --enable-sim-debug instead.\"" "$LINENO" 5; sim_cflags="";; - no) sim_cflags="";; - *) sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;; -esac -if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then - echo "Setting sim cflags = $sim_cflags" 6>&1 -fi -else - sim_cflags="" -fi - - - # Check whether --enable-sim-debug was given. if test "${enable_sim_debug+set}" = set; then : enableval=$enable_sim_debug; case "${enableval}" in diff --git a/sim/avr/ChangeLog b/sim/avr/ChangeLog index 441a937069..ae5250b616 100644 --- a/sim/avr/ChangeLog +++ b/sim/avr/ChangeLog @@ -1,3 +1,7 @@ +2016-01-10 Mike Frysinger + + * configure: Regenerate. + 2016-01-09 Mike Frysinger * config.in, configure: Regenerate. diff --git a/sim/avr/configure b/sim/avr/configure index 11b8fb5a96..70910ca014 100755 --- a/sim/avr/configure +++ b/sim/avr/configure @@ -608,7 +608,6 @@ sim_profile sim_trace sim_stdio sim_debug -sim_cflags MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -751,7 +750,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_cflags enable_sim_debug enable_sim_stdio enable_sim_trace @@ -1401,8 +1399,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-cflags=opts - Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim itself) --enable-sim-stdio Specify whether to use stdio for console @@ -12861,7 +12857,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12864 "configure" +#line 12860 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12967,7 +12963,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12970 "configure" +#line 12966 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -13235,23 +13231,6 @@ fi -# Check whether --enable-sim-cflags was given. -if test "${enable_sim_cflags+set}" = set; then : - enableval=$enable_sim_cflags; case "${enableval}" in - yes) sim_cflags="-O2 -fomit-frame-pointer";; - trace) as_fn_error "\"Please use --enable-sim-debug instead.\"" "$LINENO" 5; sim_cflags="";; - no) sim_cflags="";; - *) sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;; -esac -if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then - echo "Setting sim cflags = $sim_cflags" 6>&1 -fi -else - sim_cflags="" -fi - - - # Check whether --enable-sim-debug was given. if test "${enable_sim_debug+set}" = set; then : enableval=$enable_sim_debug; case "${enableval}" in diff --git a/sim/bfin/ChangeLog b/sim/bfin/ChangeLog index 29e26e1da5..356d9cac73 100644 --- a/sim/bfin/ChangeLog +++ b/sim/bfin/ChangeLog @@ -1,3 +1,7 @@ +2016-01-10 Mike Frysinger + + * configure: Regenerate. + 2016-01-09 Mike Frysinger * config.in, configure: Regenerate. diff --git a/sim/bfin/configure b/sim/bfin/configure index e88168c481..3fc5195327 100755 --- a/sim/bfin/configure +++ b/sim/bfin/configure @@ -613,7 +613,6 @@ sim_profile sim_trace sim_stdio sim_debug -sim_cflags MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -756,7 +755,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_cflags enable_sim_debug enable_sim_stdio enable_sim_trace @@ -1413,8 +1411,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-cflags=opts - Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim itself) --enable-sim-stdio Specify whether to use stdio for console @@ -12884,7 +12880,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12887 "configure" +#line 12883 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12990,7 +12986,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12993 "configure" +#line 12989 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -13258,23 +13254,6 @@ fi -# Check whether --enable-sim-cflags was given. -if test "${enable_sim_cflags+set}" = set; then : - enableval=$enable_sim_cflags; case "${enableval}" in - yes) sim_cflags="-O2 -fomit-frame-pointer";; - trace) as_fn_error "\"Please use --enable-sim-debug instead.\"" "$LINENO" 5; sim_cflags="";; - no) sim_cflags="";; - *) sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;; -esac -if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then - echo "Setting sim cflags = $sim_cflags" 6>&1 -fi -else - sim_cflags="" -fi - - - # Check whether --enable-sim-debug was given. if test "${enable_sim_debug+set}" = set; then : enableval=$enable_sim_debug; case "${enableval}" in diff --git a/sim/common/ChangeLog b/sim/common/ChangeLog index 42f37676cf..27ca374493 100644 --- a/sim/common/ChangeLog +++ b/sim/common/ChangeLog @@ -1,3 +1,10 @@ +2016-01-10 Mike Frysinger + + * acinclude.m4: Delete --enable-sim-cflags and sim_cflags. + * Make-common.in (SIM_CFLAGS): Delete. + (CONFIG_CFLAGS): Delete $(SIM_CFLAGS). + * Makefile.in: Likewise. + 2016-01-09 Mike Frysinger * configure.ac: Change SIM_AC_COMMON to AC_PROG_CC. Drop 2nd arg diff --git a/sim/common/Make-common.in b/sim/common/Make-common.in index 30844cc241..a90d3d8051 100644 --- a/sim/common/Make-common.in +++ b/sim/common/Make-common.in @@ -75,7 +75,6 @@ CFLAGS = @CFLAGS@ CPPFLAGS = @CPPFLAGS@ CXXFLAGS = @CXXFLAGS@ LDFLAGS = @LDFLAGS@ -SIM_CFLAGS = @sim_cflags@ SIM_DEBUG = @sim_debug@ SIM_TRACE = @sim_trace@ SIM_PROFILE = @sim_profile@ @@ -228,7 +227,6 @@ CGEN_INCLUDE_DEPS = \ CONFIG_CFLAGS = \ @DEFS@ \ - $(SIM_CFLAGS) \ $(SIM_DEBUG) \ $(SIM_DEFAULT_MODEL) \ $(SIM_TRACE) \ diff --git a/sim/common/Makefile.in b/sim/common/Makefile.in index c249b4b83b..0f934ce048 100644 --- a/sim/common/Makefile.in +++ b/sim/common/Makefile.in @@ -48,7 +48,6 @@ INSTALL_DATA = @INSTALL_DATA@ CC = @CC@ CC_FOR_BUILD = @CC_FOR_BUILD@ CFLAGS = @CFLAGS@ -SIM_CFLAGS = @sim_cflags@ # These are used to rebuild nltvals.def. CPP_FOR_TARGET = @CPP_FOR_TARGET@ @@ -57,7 +56,7 @@ TARGET_SUBDIR = @TARGET_SUBDIR@ HDEFINES = @HDEFINES@ TDEFINES = -CONFIG_CFLAGS = @DEFS@ $(SIM_CFLAGS) $(HDEFINES) $(TDEFINES) +CONFIG_CFLAGS = @DEFS@ $(HDEFINES) $(TDEFINES) CSEARCH = -I. -I$(srcdir) -I$(srcroot)/include ALL_CFLAGS = $(CFLAGS) $(CONFIG_CFLAGS) $(CSEARCH) BUILD_CFLAGS = -g -O $(CSEARCH) diff --git a/sim/common/acinclude.m4 b/sim/common/acinclude.m4 index a746ca8b61..e11e568a00 100644 --- a/sim/common/acinclude.m4 +++ b/sim/common/acinclude.m4 @@ -133,21 +133,6 @@ dnl --enable-maintainer-mode. AM_MAINTAINER_MODE -AC_ARG_ENABLE(sim-cflags, -[AS_HELP_STRING([--enable-sim-cflags=opts], - [Extra CFLAGS for use in building simulator])], -[case "${enableval}" in - yes) sim_cflags="-O2 -fomit-frame-pointer";; - trace) AC_MSG_ERROR("Please use --enable-sim-debug instead."); sim_cflags="";; - no) sim_cflags="";; - *) sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;; -esac -if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then - echo "Setting sim cflags = $sim_cflags" 6>&1 -fi],[sim_cflags=""])dnl -AC_SUBST(sim_cflags) - - dnl --enable-sim-debug is for developers of the simulator dnl the allowable values are work-in-progress AC_ARG_ENABLE(sim-debug, diff --git a/sim/cr16/ChangeLog b/sim/cr16/ChangeLog index ca0674c18f..d9ec562b4b 100644 --- a/sim/cr16/ChangeLog +++ b/sim/cr16/ChangeLog @@ -1,3 +1,7 @@ +2016-01-10 Mike Frysinger + + * configure: Regenerate. + 2016-01-09 Mike Frysinger * config.in, configure: Regenerate. diff --git a/sim/cr16/configure b/sim/cr16/configure index f6b04b3c7c..5e47cd44cd 100755 --- a/sim/cr16/configure +++ b/sim/cr16/configure @@ -608,7 +608,6 @@ sim_profile sim_trace sim_stdio sim_debug -sim_cflags MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -751,7 +750,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_cflags enable_sim_debug enable_sim_stdio enable_sim_trace @@ -1401,8 +1399,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-cflags=opts - Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim itself) --enable-sim-stdio Specify whether to use stdio for console @@ -12861,7 +12857,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12864 "configure" +#line 12860 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12967,7 +12963,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12970 "configure" +#line 12966 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -13235,23 +13231,6 @@ fi -# Check whether --enable-sim-cflags was given. -if test "${enable_sim_cflags+set}" = set; then : - enableval=$enable_sim_cflags; case "${enableval}" in - yes) sim_cflags="-O2 -fomit-frame-pointer";; - trace) as_fn_error "\"Please use --enable-sim-debug instead.\"" "$LINENO" 5; sim_cflags="";; - no) sim_cflags="";; - *) sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;; -esac -if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then - echo "Setting sim cflags = $sim_cflags" 6>&1 -fi -else - sim_cflags="" -fi - - - # Check whether --enable-sim-debug was given. if test "${enable_sim_debug+set}" = set; then : enableval=$enable_sim_debug; case "${enableval}" in diff --git a/sim/cris/ChangeLog b/sim/cris/ChangeLog index 592b20e84a..3ffe1c7ee3 100644 --- a/sim/cris/ChangeLog +++ b/sim/cris/ChangeLog @@ -1,3 +1,7 @@ +2016-01-10 Mike Frysinger + + * configure: Regenerate. + 2016-01-09 Mike Frysinger * config.in, configure: Regenerate. diff --git a/sim/cris/configure b/sim/cris/configure index 6f2653efdd..e282c13659 100755 --- a/sim/cris/configure +++ b/sim/cris/configure @@ -611,7 +611,6 @@ sim_profile sim_trace sim_stdio sim_debug -sim_cflags MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -754,7 +753,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_cflags enable_sim_debug enable_sim_stdio enable_sim_trace @@ -1408,8 +1406,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-cflags=opts - Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim itself) --enable-sim-stdio Specify whether to use stdio for console @@ -12875,7 +12871,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12878 "configure" +#line 12874 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12981,7 +12977,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12984 "configure" +#line 12980 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -13249,23 +13245,6 @@ fi -# Check whether --enable-sim-cflags was given. -if test "${enable_sim_cflags+set}" = set; then : - enableval=$enable_sim_cflags; case "${enableval}" in - yes) sim_cflags="-O2 -fomit-frame-pointer";; - trace) as_fn_error "\"Please use --enable-sim-debug instead.\"" "$LINENO" 5; sim_cflags="";; - no) sim_cflags="";; - *) sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;; -esac -if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then - echo "Setting sim cflags = $sim_cflags" 6>&1 -fi -else - sim_cflags="" -fi - - - # Check whether --enable-sim-debug was given. if test "${enable_sim_debug+set}" = set; then : enableval=$enable_sim_debug; case "${enableval}" in diff --git a/sim/d10v/ChangeLog b/sim/d10v/ChangeLog index 10e0d3f189..115ac0d4ce 100644 --- a/sim/d10v/ChangeLog +++ b/sim/d10v/ChangeLog @@ -1,3 +1,7 @@ +2016-01-10 Mike Frysinger + + * configure: Regenerate. + 2016-01-09 Mike Frysinger * config.in, configure: Regenerate. diff --git a/sim/d10v/configure b/sim/d10v/configure index 87674c4fe5..027cd01149 100755 --- a/sim/d10v/configure +++ b/sim/d10v/configure @@ -608,7 +608,6 @@ sim_profile sim_trace sim_stdio sim_debug -sim_cflags MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -751,7 +750,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_cflags enable_sim_debug enable_sim_stdio enable_sim_trace @@ -1401,8 +1399,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-cflags=opts - Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim itself) --enable-sim-stdio Specify whether to use stdio for console @@ -12861,7 +12857,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12864 "configure" +#line 12860 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12967,7 +12963,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12970 "configure" +#line 12966 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -13235,23 +13231,6 @@ fi -# Check whether --enable-sim-cflags was given. -if test "${enable_sim_cflags+set}" = set; then : - enableval=$enable_sim_cflags; case "${enableval}" in - yes) sim_cflags="-O2 -fomit-frame-pointer";; - trace) as_fn_error "\"Please use --enable-sim-debug instead.\"" "$LINENO" 5; sim_cflags="";; - no) sim_cflags="";; - *) sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;; -esac -if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then - echo "Setting sim cflags = $sim_cflags" 6>&1 -fi -else - sim_cflags="" -fi - - - # Check whether --enable-sim-debug was given. if test "${enable_sim_debug+set}" = set; then : enableval=$enable_sim_debug; case "${enableval}" in diff --git a/sim/erc32/ChangeLog b/sim/erc32/ChangeLog index d49c23c94a..8330832d70 100644 --- a/sim/erc32/ChangeLog +++ b/sim/erc32/ChangeLog @@ -1,3 +1,7 @@ +2016-01-10 Mike Frysinger + + * configure: Regenerate. + 2016-01-09 Mike Frysinger * config.in, configure: Regenerate. diff --git a/sim/erc32/configure b/sim/erc32/configure index 2a6638833c..726cbf0ca9 100755 --- a/sim/erc32/configure +++ b/sim/erc32/configure @@ -610,7 +610,6 @@ sim_profile sim_trace sim_stdio sim_debug -sim_cflags MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -753,7 +752,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_cflags enable_sim_debug enable_sim_stdio enable_sim_trace @@ -1396,8 +1394,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-cflags=opts - Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim itself) --enable-sim-stdio Specify whether to use stdio for console @@ -12841,7 +12837,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12844 "configure" +#line 12840 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12947,7 +12943,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12950 "configure" +#line 12946 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -13215,23 +13211,6 @@ fi -# Check whether --enable-sim-cflags was given. -if test "${enable_sim_cflags+set}" = set; then : - enableval=$enable_sim_cflags; case "${enableval}" in - yes) sim_cflags="-O2 -fomit-frame-pointer";; - trace) as_fn_error "\"Please use --enable-sim-debug instead.\"" "$LINENO" 5; sim_cflags="";; - no) sim_cflags="";; - *) sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;; -esac -if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then - echo "Setting sim cflags = $sim_cflags" 6>&1 -fi -else - sim_cflags="" -fi - - - # Check whether --enable-sim-debug was given. if test "${enable_sim_debug+set}" = set; then : enableval=$enable_sim_debug; case "${enableval}" in diff --git a/sim/frv/ChangeLog b/sim/frv/ChangeLog index 66d73ff915..c06ec3da21 100644 --- a/sim/frv/ChangeLog +++ b/sim/frv/ChangeLog @@ -1,3 +1,7 @@ +2016-01-10 Mike Frysinger + + * configure: Regenerate. + 2016-01-09 Mike Frysinger * config.in, configure: Regenerate. diff --git a/sim/frv/configure b/sim/frv/configure index 207534bbe7..48c0bdb991 100755 --- a/sim/frv/configure +++ b/sim/frv/configure @@ -612,7 +612,6 @@ sim_profile sim_trace sim_stdio sim_debug -sim_cflags MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -755,7 +754,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_cflags enable_sim_debug enable_sim_stdio enable_sim_trace @@ -1406,8 +1404,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-cflags=opts - Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim itself) --enable-sim-stdio Specify whether to use stdio for console @@ -12867,7 +12863,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12870 "configure" +#line 12866 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12973,7 +12969,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12976 "configure" +#line 12972 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -13241,23 +13237,6 @@ fi -# Check whether --enable-sim-cflags was given. -if test "${enable_sim_cflags+set}" = set; then : - enableval=$enable_sim_cflags; case "${enableval}" in - yes) sim_cflags="-O2 -fomit-frame-pointer";; - trace) as_fn_error "\"Please use --enable-sim-debug instead.\"" "$LINENO" 5; sim_cflags="";; - no) sim_cflags="";; - *) sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;; -esac -if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then - echo "Setting sim cflags = $sim_cflags" 6>&1 -fi -else - sim_cflags="" -fi - - - # Check whether --enable-sim-debug was given. if test "${enable_sim_debug+set}" = set; then : enableval=$enable_sim_debug; case "${enableval}" in diff --git a/sim/ft32/ChangeLog b/sim/ft32/ChangeLog index 1be9545a81..639f37b4f0 100644 --- a/sim/ft32/ChangeLog +++ b/sim/ft32/ChangeLog @@ -1,3 +1,7 @@ +2016-01-10 Mike Frysinger + + * configure: Regenerate. + 2016-01-09 Mike Frysinger * config.in, configure: Regenerate. diff --git a/sim/ft32/configure b/sim/ft32/configure index cc8f3935b8..c8b2833806 100755 --- a/sim/ft32/configure +++ b/sim/ft32/configure @@ -608,7 +608,6 @@ sim_profile sim_trace sim_stdio sim_debug -sim_cflags MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -751,7 +750,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_cflags enable_sim_debug enable_sim_stdio enable_sim_trace @@ -1401,8 +1399,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-cflags=opts - Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim itself) --enable-sim-stdio Specify whether to use stdio for console @@ -12861,7 +12857,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12864 "configure" +#line 12860 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12967,7 +12963,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12970 "configure" +#line 12966 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -13235,23 +13231,6 @@ fi -# Check whether --enable-sim-cflags was given. -if test "${enable_sim_cflags+set}" = set; then : - enableval=$enable_sim_cflags; case "${enableval}" in - yes) sim_cflags="-O2 -fomit-frame-pointer";; - trace) as_fn_error "\"Please use --enable-sim-debug instead.\"" "$LINENO" 5; sim_cflags="";; - no) sim_cflags="";; - *) sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;; -esac -if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then - echo "Setting sim cflags = $sim_cflags" 6>&1 -fi -else - sim_cflags="" -fi - - - # Check whether --enable-sim-debug was given. if test "${enable_sim_debug+set}" = set; then : enableval=$enable_sim_debug; case "${enableval}" in diff --git a/sim/h8300/ChangeLog b/sim/h8300/ChangeLog index a18cc8ee1a..75c4d8249c 100644 --- a/sim/h8300/ChangeLog +++ b/sim/h8300/ChangeLog @@ -1,3 +1,7 @@ +2016-01-10 Mike Frysinger + + * configure: Regenerate. + 2016-01-09 Mike Frysinger * config.in, configure: Regenerate. diff --git a/sim/h8300/configure b/sim/h8300/configure index 0d39176f0d..dc75ac285e 100755 --- a/sim/h8300/configure +++ b/sim/h8300/configure @@ -608,7 +608,6 @@ sim_profile sim_trace sim_stdio sim_debug -sim_cflags MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -751,7 +750,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_cflags enable_sim_debug enable_sim_stdio enable_sim_trace @@ -1396,8 +1394,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-cflags=opts - Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim itself) --enable-sim-stdio Specify whether to use stdio for console @@ -12846,7 +12842,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12849 "configure" +#line 12845 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12952,7 +12948,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12955 "configure" +#line 12951 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -13220,23 +13216,6 @@ fi -# Check whether --enable-sim-cflags was given. -if test "${enable_sim_cflags+set}" = set; then : - enableval=$enable_sim_cflags; case "${enableval}" in - yes) sim_cflags="-O2 -fomit-frame-pointer";; - trace) as_fn_error "\"Please use --enable-sim-debug instead.\"" "$LINENO" 5; sim_cflags="";; - no) sim_cflags="";; - *) sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;; -esac -if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then - echo "Setting sim cflags = $sim_cflags" 6>&1 -fi -else - sim_cflags="" -fi - - - # Check whether --enable-sim-debug was given. if test "${enable_sim_debug+set}" = set; then : enableval=$enable_sim_debug; case "${enableval}" in diff --git a/sim/iq2000/ChangeLog b/sim/iq2000/ChangeLog index 26d315c334..f8582a4fe7 100644 --- a/sim/iq2000/ChangeLog +++ b/sim/iq2000/ChangeLog @@ -1,3 +1,7 @@ +2016-01-10 Mike Frysinger + + * configure: Regenerate. + 2016-01-09 Mike Frysinger * config.in, configure: Regenerate. diff --git a/sim/iq2000/configure b/sim/iq2000/configure index 5678ee73e7..071c452af0 100755 --- a/sim/iq2000/configure +++ b/sim/iq2000/configure @@ -611,7 +611,6 @@ sim_profile sim_trace sim_stdio sim_debug -sim_cflags MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -754,7 +753,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_cflags enable_sim_debug enable_sim_stdio enable_sim_trace @@ -1405,8 +1403,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-cflags=opts - Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim itself) --enable-sim-stdio Specify whether to use stdio for console @@ -12867,7 +12863,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12870 "configure" +#line 12866 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12973,7 +12969,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12976 "configure" +#line 12972 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -13241,23 +13237,6 @@ fi -# Check whether --enable-sim-cflags was given. -if test "${enable_sim_cflags+set}" = set; then : - enableval=$enable_sim_cflags; case "${enableval}" in - yes) sim_cflags="-O2 -fomit-frame-pointer";; - trace) as_fn_error "\"Please use --enable-sim-debug instead.\"" "$LINENO" 5; sim_cflags="";; - no) sim_cflags="";; - *) sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;; -esac -if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then - echo "Setting sim cflags = $sim_cflags" 6>&1 -fi -else - sim_cflags="" -fi - - - # Check whether --enable-sim-debug was given. if test "${enable_sim_debug+set}" = set; then : enableval=$enable_sim_debug; case "${enableval}" in diff --git a/sim/lm32/ChangeLog b/sim/lm32/ChangeLog index 8f2bbfc668..0b4fb4d9c6 100644 --- a/sim/lm32/ChangeLog +++ b/sim/lm32/ChangeLog @@ -1,3 +1,7 @@ +2016-01-10 Mike Frysinger + + * configure: Regenerate. + 2016-01-09 Mike Frysinger * config.in, configure: Regenerate. diff --git a/sim/lm32/configure b/sim/lm32/configure index d5628508ab..6c9c630d97 100755 --- a/sim/lm32/configure +++ b/sim/lm32/configure @@ -611,7 +611,6 @@ sim_profile sim_trace sim_stdio sim_debug -sim_cflags MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -754,7 +753,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_cflags enable_sim_debug enable_sim_stdio enable_sim_trace @@ -1404,8 +1402,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-cflags=opts - Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim itself) --enable-sim-stdio Specify whether to use stdio for console @@ -12864,7 +12860,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12867 "configure" +#line 12863 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12970,7 +12966,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12973 "configure" +#line 12969 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -13238,23 +13234,6 @@ fi -# Check whether --enable-sim-cflags was given. -if test "${enable_sim_cflags+set}" = set; then : - enableval=$enable_sim_cflags; case "${enableval}" in - yes) sim_cflags="-O2 -fomit-frame-pointer";; - trace) as_fn_error "\"Please use --enable-sim-debug instead.\"" "$LINENO" 5; sim_cflags="";; - no) sim_cflags="";; - *) sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;; -esac -if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then - echo "Setting sim cflags = $sim_cflags" 6>&1 -fi -else - sim_cflags="" -fi - - - # Check whether --enable-sim-debug was given. if test "${enable_sim_debug+set}" = set; then : enableval=$enable_sim_debug; case "${enableval}" in diff --git a/sim/m32c/ChangeLog b/sim/m32c/ChangeLog index 331839e918..28ea3189d5 100644 --- a/sim/m32c/ChangeLog +++ b/sim/m32c/ChangeLog @@ -1,3 +1,7 @@ +2016-01-10 Mike Frysinger + + * configure: Regenerate. + 2016-01-09 Mike Frysinger * config.in, configure: Regenerate. diff --git a/sim/m32c/configure b/sim/m32c/configure index 2a6398d9d1..4341010c32 100755 --- a/sim/m32c/configure +++ b/sim/m32c/configure @@ -608,7 +608,6 @@ sim_profile sim_trace sim_stdio sim_debug -sim_cflags MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -751,7 +750,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_cflags enable_sim_debug enable_sim_stdio enable_sim_trace @@ -1397,8 +1395,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-cflags=opts - Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim itself) --enable-sim-stdio Specify whether to use stdio for console @@ -12847,7 +12843,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12850 "configure" +#line 12846 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12953,7 +12949,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12956 "configure" +#line 12952 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -13221,23 +13217,6 @@ fi -# Check whether --enable-sim-cflags was given. -if test "${enable_sim_cflags+set}" = set; then : - enableval=$enable_sim_cflags; case "${enableval}" in - yes) sim_cflags="-O2 -fomit-frame-pointer";; - trace) as_fn_error "\"Please use --enable-sim-debug instead.\"" "$LINENO" 5; sim_cflags="";; - no) sim_cflags="";; - *) sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;; -esac -if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then - echo "Setting sim cflags = $sim_cflags" 6>&1 -fi -else - sim_cflags="" -fi - - - # Check whether --enable-sim-debug was given. if test "${enable_sim_debug+set}" = set; then : enableval=$enable_sim_debug; case "${enableval}" in diff --git a/sim/m32r/ChangeLog b/sim/m32r/ChangeLog index 9345e0a5fb..a6771fdbae 100644 --- a/sim/m32r/ChangeLog +++ b/sim/m32r/ChangeLog @@ -1,3 +1,7 @@ +2016-01-10 Mike Frysinger + + * configure: Regenerate. + 2016-01-09 Mike Frysinger * config.in, configure: Regenerate. diff --git a/sim/m32r/configure b/sim/m32r/configure index 78125dbb29..afae89d53f 100755 --- a/sim/m32r/configure +++ b/sim/m32r/configure @@ -613,7 +613,6 @@ sim_profile sim_trace sim_stdio sim_debug -sim_cflags MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -756,7 +755,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_cflags enable_sim_debug enable_sim_stdio enable_sim_trace @@ -1407,8 +1405,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-cflags=opts - Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim itself) --enable-sim-stdio Specify whether to use stdio for console @@ -12869,7 +12865,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12872 "configure" +#line 12868 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12975,7 +12971,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12978 "configure" +#line 12974 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -13243,23 +13239,6 @@ fi -# Check whether --enable-sim-cflags was given. -if test "${enable_sim_cflags+set}" = set; then : - enableval=$enable_sim_cflags; case "${enableval}" in - yes) sim_cflags="-O2 -fomit-frame-pointer";; - trace) as_fn_error "\"Please use --enable-sim-debug instead.\"" "$LINENO" 5; sim_cflags="";; - no) sim_cflags="";; - *) sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;; -esac -if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then - echo "Setting sim cflags = $sim_cflags" 6>&1 -fi -else - sim_cflags="" -fi - - - # Check whether --enable-sim-debug was given. if test "${enable_sim_debug+set}" = set; then : enableval=$enable_sim_debug; case "${enableval}" in diff --git a/sim/m68hc11/ChangeLog b/sim/m68hc11/ChangeLog index afe6460200..a61ff11b2e 100644 --- a/sim/m68hc11/ChangeLog +++ b/sim/m68hc11/ChangeLog @@ -1,3 +1,7 @@ +2016-01-10 Mike Frysinger + + * configure: Regenerate. + 2016-01-09 Mike Frysinger * config.in, configure: Regenerate. diff --git a/sim/m68hc11/configure b/sim/m68hc11/configure index dc57b61b58..5921c48055 100755 --- a/sim/m68hc11/configure +++ b/sim/m68hc11/configure @@ -608,7 +608,6 @@ sim_profile sim_trace sim_stdio sim_debug -sim_cflags MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -751,7 +750,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_cflags enable_sim_debug enable_sim_stdio enable_sim_trace @@ -1401,8 +1399,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-cflags=opts - Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim itself) --enable-sim-stdio Specify whether to use stdio for console @@ -12860,7 +12856,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12863 "configure" +#line 12859 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12966,7 +12962,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12969 "configure" +#line 12965 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -13234,23 +13230,6 @@ fi -# Check whether --enable-sim-cflags was given. -if test "${enable_sim_cflags+set}" = set; then : - enableval=$enable_sim_cflags; case "${enableval}" in - yes) sim_cflags="-O2 -fomit-frame-pointer";; - trace) as_fn_error "\"Please use --enable-sim-debug instead.\"" "$LINENO" 5; sim_cflags="";; - no) sim_cflags="";; - *) sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;; -esac -if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then - echo "Setting sim cflags = $sim_cflags" 6>&1 -fi -else - sim_cflags="" -fi - - - # Check whether --enable-sim-debug was given. if test "${enable_sim_debug+set}" = set; then : enableval=$enable_sim_debug; case "${enableval}" in diff --git a/sim/mcore/ChangeLog b/sim/mcore/ChangeLog index c42937147d..db04072fa5 100644 --- a/sim/mcore/ChangeLog +++ b/sim/mcore/ChangeLog @@ -1,3 +1,7 @@ +2016-01-10 Mike Frysinger + + * configure: Regenerate. + 2016-01-09 Mike Frysinger * config.in, configure: Regenerate. diff --git a/sim/mcore/configure b/sim/mcore/configure index 87674c4fe5..027cd01149 100755 --- a/sim/mcore/configure +++ b/sim/mcore/configure @@ -608,7 +608,6 @@ sim_profile sim_trace sim_stdio sim_debug -sim_cflags MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -751,7 +750,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_cflags enable_sim_debug enable_sim_stdio enable_sim_trace @@ -1401,8 +1399,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-cflags=opts - Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim itself) --enable-sim-stdio Specify whether to use stdio for console @@ -12861,7 +12857,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12864 "configure" +#line 12860 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12967,7 +12963,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12970 "configure" +#line 12966 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -13235,23 +13231,6 @@ fi -# Check whether --enable-sim-cflags was given. -if test "${enable_sim_cflags+set}" = set; then : - enableval=$enable_sim_cflags; case "${enableval}" in - yes) sim_cflags="-O2 -fomit-frame-pointer";; - trace) as_fn_error "\"Please use --enable-sim-debug instead.\"" "$LINENO" 5; sim_cflags="";; - no) sim_cflags="";; - *) sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;; -esac -if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then - echo "Setting sim cflags = $sim_cflags" 6>&1 -fi -else - sim_cflags="" -fi - - - # Check whether --enable-sim-debug was given. if test "${enable_sim_debug+set}" = set; then : enableval=$enable_sim_debug; case "${enableval}" in diff --git a/sim/microblaze/ChangeLog b/sim/microblaze/ChangeLog index f2fc2af54d..84c45e6234 100644 --- a/sim/microblaze/ChangeLog +++ b/sim/microblaze/ChangeLog @@ -1,3 +1,7 @@ +2016-01-10 Mike Frysinger + + * configure: Regenerate. + 2016-01-09 Mike Frysinger * config.in, configure: Regenerate. diff --git a/sim/microblaze/configure b/sim/microblaze/configure index 87674c4fe5..027cd01149 100755 --- a/sim/microblaze/configure +++ b/sim/microblaze/configure @@ -608,7 +608,6 @@ sim_profile sim_trace sim_stdio sim_debug -sim_cflags MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -751,7 +750,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_cflags enable_sim_debug enable_sim_stdio enable_sim_trace @@ -1401,8 +1399,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-cflags=opts - Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim itself) --enable-sim-stdio Specify whether to use stdio for console @@ -12861,7 +12857,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12864 "configure" +#line 12860 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12967,7 +12963,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12970 "configure" +#line 12966 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -13235,23 +13231,6 @@ fi -# Check whether --enable-sim-cflags was given. -if test "${enable_sim_cflags+set}" = set; then : - enableval=$enable_sim_cflags; case "${enableval}" in - yes) sim_cflags="-O2 -fomit-frame-pointer";; - trace) as_fn_error "\"Please use --enable-sim-debug instead.\"" "$LINENO" 5; sim_cflags="";; - no) sim_cflags="";; - *) sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;; -esac -if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then - echo "Setting sim cflags = $sim_cflags" 6>&1 -fi -else - sim_cflags="" -fi - - - # Check whether --enable-sim-debug was given. if test "${enable_sim_debug+set}" = set; then : enableval=$enable_sim_debug; case "${enableval}" in diff --git a/sim/mips/ChangeLog b/sim/mips/ChangeLog index f43e36b10b..98bef9a940 100644 --- a/sim/mips/ChangeLog +++ b/sim/mips/ChangeLog @@ -1,3 +1,7 @@ +2016-01-10 Mike Frysinger + + * configure: Regenerate. + 2016-01-09 Mike Frysinger * config.in, configure: Regenerate. diff --git a/sim/mips/configure b/sim/mips/configure index 7bf62eac37..3b69a00c27 100755 --- a/sim/mips/configure +++ b/sim/mips/configure @@ -621,7 +621,6 @@ sim_profile sim_trace sim_stdio sim_debug -sim_cflags MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -764,7 +763,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_cflags enable_sim_debug enable_sim_stdio enable_sim_trace @@ -1424,8 +1422,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-cflags=opts - Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim itself) --enable-sim-stdio Specify whether to use stdio for console @@ -12893,7 +12889,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12896 "configure" +#line 12892 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12999,7 +12995,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 13002 "configure" +#line 12998 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -13267,23 +13263,6 @@ fi -# Check whether --enable-sim-cflags was given. -if test "${enable_sim_cflags+set}" = set; then : - enableval=$enable_sim_cflags; case "${enableval}" in - yes) sim_cflags="-O2 -fomit-frame-pointer";; - trace) as_fn_error "\"Please use --enable-sim-debug instead.\"" "$LINENO" 5; sim_cflags="";; - no) sim_cflags="";; - *) sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;; -esac -if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then - echo "Setting sim cflags = $sim_cflags" 6>&1 -fi -else - sim_cflags="" -fi - - - # Check whether --enable-sim-debug was given. if test "${enable_sim_debug+set}" = set; then : enableval=$enable_sim_debug; case "${enableval}" in diff --git a/sim/mn10300/ChangeLog b/sim/mn10300/ChangeLog index f1df49ee47..591ca58d02 100644 --- a/sim/mn10300/ChangeLog +++ b/sim/mn10300/ChangeLog @@ -1,3 +1,7 @@ +2016-01-10 Mike Frysinger + + * configure: Regenerate. + 2016-01-09 Mike Frysinger * config.in, configure: Regenerate. diff --git a/sim/mn10300/configure b/sim/mn10300/configure index f6bad045ff..4f0f45ca56 100755 --- a/sim/mn10300/configure +++ b/sim/mn10300/configure @@ -608,7 +608,6 @@ sim_profile sim_trace sim_stdio sim_debug -sim_cflags MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -751,7 +750,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_cflags enable_sim_debug enable_sim_stdio enable_sim_trace @@ -1403,8 +1401,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-cflags=opts - Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim itself) --enable-sim-stdio Specify whether to use stdio for console @@ -12866,7 +12862,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12869 "configure" +#line 12865 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12972,7 +12968,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12975 "configure" +#line 12971 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -13240,23 +13236,6 @@ fi -# Check whether --enable-sim-cflags was given. -if test "${enable_sim_cflags+set}" = set; then : - enableval=$enable_sim_cflags; case "${enableval}" in - yes) sim_cflags="-O2 -fomit-frame-pointer";; - trace) as_fn_error "\"Please use --enable-sim-debug instead.\"" "$LINENO" 5; sim_cflags="";; - no) sim_cflags="";; - *) sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;; -esac -if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then - echo "Setting sim cflags = $sim_cflags" 6>&1 -fi -else - sim_cflags="" -fi - - - # Check whether --enable-sim-debug was given. if test "${enable_sim_debug+set}" = set; then : enableval=$enable_sim_debug; case "${enableval}" in diff --git a/sim/moxie/ChangeLog b/sim/moxie/ChangeLog index b2fcfb5d7b..beaff022dd 100644 --- a/sim/moxie/ChangeLog +++ b/sim/moxie/ChangeLog @@ -1,3 +1,9 @@ +2016-01-10 Mike Frysinger + + * configure: Regenerate. + * Makefile.in (SIM_CFLAGS): Rename to ... + (SIM_EXTRA_CFLAGS): ... this. + 2016-01-09 Mike Frysinger * config.in, configure: Regenerate. diff --git a/sim/moxie/Makefile.in b/sim/moxie/Makefile.in index 25eab0f84d..fd967a80dd 100644 --- a/sim/moxie/Makefile.in +++ b/sim/moxie/Makefile.in @@ -26,7 +26,7 @@ SIM_OBJS = \ SIM_EXTRA_LIBS = -lm -lz SIM_EXTRA_INSTALL = install-dtb -SIM_CFLAGS = -DDTB="\"$(dtbdir)/moxie-gdb.dtb\"" +SIM_EXTRA_CFLAGS = -DDTB="\"$(dtbdir)/moxie-gdb.dtb\"" ## COMMON_POST_CONFIG_FRAG diff --git a/sim/moxie/configure b/sim/moxie/configure index dc1ffd1eb3..802f58952e 100755 --- a/sim/moxie/configure +++ b/sim/moxie/configure @@ -609,7 +609,6 @@ sim_profile sim_trace sim_stdio sim_debug -sim_cflags MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -752,7 +751,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_cflags enable_sim_debug enable_sim_stdio enable_sim_trace @@ -1402,8 +1400,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-cflags=opts - Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim itself) --enable-sim-stdio Specify whether to use stdio for console @@ -12862,7 +12858,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12865 "configure" +#line 12861 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12968,7 +12964,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12971 "configure" +#line 12967 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -13236,23 +13232,6 @@ fi -# Check whether --enable-sim-cflags was given. -if test "${enable_sim_cflags+set}" = set; then : - enableval=$enable_sim_cflags; case "${enableval}" in - yes) sim_cflags="-O2 -fomit-frame-pointer";; - trace) as_fn_error "\"Please use --enable-sim-debug instead.\"" "$LINENO" 5; sim_cflags="";; - no) sim_cflags="";; - *) sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;; -esac -if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then - echo "Setting sim cflags = $sim_cflags" 6>&1 -fi -else - sim_cflags="" -fi - - - # Check whether --enable-sim-debug was given. if test "${enable_sim_debug+set}" = set; then : enableval=$enable_sim_debug; case "${enableval}" in diff --git a/sim/msp430/ChangeLog b/sim/msp430/ChangeLog index 9006c7fa1b..15877a6622 100644 --- a/sim/msp430/ChangeLog +++ b/sim/msp430/ChangeLog @@ -1,3 +1,7 @@ +2016-01-10 Mike Frysinger + + * configure: Regenerate. + 2016-01-09 Mike Frysinger * config.in, configure: Regenerate. diff --git a/sim/msp430/configure b/sim/msp430/configure index dc55890bc2..4e3b2e71b4 100755 --- a/sim/msp430/configure +++ b/sim/msp430/configure @@ -608,7 +608,6 @@ sim_profile sim_trace sim_stdio sim_debug -sim_cflags MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -751,7 +750,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_cflags enable_sim_debug enable_sim_stdio enable_sim_trace @@ -1400,8 +1398,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-cflags=opts - Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim itself) --enable-sim-stdio Specify whether to use stdio for console @@ -12857,7 +12853,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12860 "configure" +#line 12856 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12963,7 +12959,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12966 "configure" +#line 12962 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -13231,23 +13227,6 @@ fi -# Check whether --enable-sim-cflags was given. -if test "${enable_sim_cflags+set}" = set; then : - enableval=$enable_sim_cflags; case "${enableval}" in - yes) sim_cflags="-O2 -fomit-frame-pointer";; - trace) as_fn_error "\"Please use --enable-sim-debug instead.\"" "$LINENO" 5; sim_cflags="";; - no) sim_cflags="";; - *) sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;; -esac -if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then - echo "Setting sim cflags = $sim_cflags" 6>&1 -fi -else - sim_cflags="" -fi - - - # Check whether --enable-sim-debug was given. if test "${enable_sim_debug+set}" = set; then : enableval=$enable_sim_debug; case "${enableval}" in diff --git a/sim/ppc/ChangeLog b/sim/ppc/ChangeLog index ae770ac985..25bdd6ccde 100644 --- a/sim/ppc/ChangeLog +++ b/sim/ppc/ChangeLog @@ -1,3 +1,12 @@ +2016-01-10 Mike Frysinger + + * configure.ac: Delete --enable-sim-cflags and sim_cflags. + * configure: Regenerate. + * INSTALL: Delete all mention of --enable-sim-cflags. + * Makefile.in (SIM_CFLAGS): Delete. + (STD_CFLAGS, NOWARN_CFLAGS): Delete $(SIM_CFLAGS). + (psim): Likewise. + 2016-01-06 Mike Frysinger * sim_calls.c (sim_open): Mark argv const. diff --git a/sim/ppc/INSTALL b/sim/ppc/INSTALL index 8240ac79c5..9feac7b9e6 100644 --- a/sim/ppc/INSTALL +++ b/sim/ppc/INSTALL @@ -197,36 +197,6 @@ Each PSIM specific option is discussed in detail below. ---enable-sim-cflags= - - -Specify additional C compiler flags that are to be used when compiling -just PSIM. - -PSIM places heavy demands on both the host machine and its C compiler. So that -the builder has better control over the compiler the above option can be used -to pass additional options to the compiler while PSIM is being built. - -Ex: No debug information - -PSIM can be built with everything inline. Unfortunately, because of -all the debugging information generated the C compiler can grow very -very large as a result. For GCC, the debug information can be -restricted with the `-g0' option. To specify that this option should -be include in the CFLAGS when compiling the psim source code use: - - --enable-sim-cflags=-g0 - -Ex: Additional optimization flags - -A significant gain in performance can be achieved by tuning the -optimization flags passed to the C compiler. For instance on an x86 -you may consider: - - --enable-sim-cflags='-g0 -O2 -fno-strength-reduce -f...' - - - --enable-sim-warnings= @@ -757,8 +727,7 @@ TYPICAL CONFIGURATION OPTIONS: --enable-sim-env=user \ --disable-sim-reserved-bits \ --disable-sim-assert \ - --disable-sim-trace \ - --enable-sim-cflags='-g0,-O2,-fno-strength-reduce,-fomit-frame-pointer' + --disable-sim-trace OEA CODE ONLY: @@ -792,5 +761,4 @@ TYPICAL CONFIGURATION OPTIONS: --disable-sim-assert \ --disable-sim-trace \ --enable-sim-opcode=ppc-opcode-flat \ - --disable-sim-icache \ - --enable-sim-cflags='-g0,-O3,-fno-strength-reduce,-fomit-frame-pointer' + --disable-sim-icache diff --git a/sim/ppc/Makefile.in b/sim/ppc/Makefile.in index 6efa73f6d0..139fc6c703 100644 --- a/sim/ppc/Makefile.in +++ b/sim/ppc/Makefile.in @@ -70,7 +70,6 @@ BISON = bison MAKEINFO = makeinfo RANLIB = @RANLIB@ -SIM_CFLAGS = @sim_cflags@ INLINE_CFLAGS = @sim_inline@ ENDIAN_CFLAGS = @sim_endian@ REGPARM_CFLAGS = @sim_regparm@ @@ -116,8 +115,8 @@ CONFIG_CFLAGS = \ $(DEVZERO_CFLAGS) SIM_FPU_CFLAGS = @sim_fpu_cflags@ -STD_CFLAGS = $(CFLAGS) $(INLINE_CFLAGS) $(CONFIG_CFLAGS) $(WARNING_CFLAGS) $(SIM_CFLAGS) $(HDEFINES) $(TDEFINES) $(INCLUDES) $(INTL_CFLAGS) $(SIM_FPU_CFLAGS) -NOWARN_CFLAGS = $(CFLAGS) $(INLINE_CFLAGS) $(CONFIG_CFLAGS) $(SIM_CFLAGS) $(HDEFINES) $(TDEFINES) $(INCLUDES) $(SIM_FPU_CFLAGS) +STD_CFLAGS = $(CFLAGS) $(INLINE_CFLAGS) $(CONFIG_CFLAGS) $(WARNING_CFLAGS) $(HDEFINES) $(TDEFINES) $(INCLUDES) $(INTL_CFLAGS) $(SIM_FPU_CFLAGS) +NOWARN_CFLAGS = $(CFLAGS) $(INLINE_CFLAGS) $(CONFIG_CFLAGS) $(HDEFINES) $(TDEFINES) $(INCLUDES) $(SIM_FPU_CFLAGS) BUILD_CFLAGS = $(CFLAGS_FOR_BUILD) $(INCLUDES) $(WARNING_CFLAGS) BUILD_LDFLAGS = @@ -550,7 +549,7 @@ PACKAGE_OBJ = @sim_pk_obj@ psim: $(TARGETLIB) main.o $(LIBIBERTY_LIB) $(BFD_LIB) $(LIBINTL_DEP) - $(CC) $(CFLAGS) $(SIM_CFLAGS) $(LDFLAGS) -o psim$(EXEEXT) main.o $(TARGETLIB) $(BFD_LIB) $(ZLIB) $(LIBINTL) $(LIBIBERTY_LIB) $(LIBS) + $(CC) $(CFLAGS) $(LDFLAGS) -o psim$(EXEEXT) main.o $(TARGETLIB) $(BFD_LIB) $(ZLIB) $(LIBINTL) $(LIBIBERTY_LIB) $(LIBS) run: psim rm -f run$(EXEEXT) diff --git a/sim/ppc/configure b/sim/ppc/configure index 63f1395257..d552628d5d 100755 --- a/sim/ppc/configure +++ b/sim/ppc/configure @@ -620,7 +620,6 @@ sim_opcode sim_config sim_line_nr sim_warnings -sim_cflags RANLIB AR HDEFINES @@ -733,7 +732,6 @@ enable_option_checking enable_sim_alignment enable_sim_assert enable_sim_bitsize -enable_sim_cflags enable_sim_config enable_sim_decode_mechanism enable_sim_default_model @@ -1399,7 +1397,6 @@ Optional Features: --enable-sim-alignment=align Specify strict or nonstrict alignment. --enable-sim-assert Specify whether to perform random assertions. --enable-sim-bitsize=n Specify target bitsize (32 or 64). - --enable-sim-cflags=opts Extra CFLAGS for use in building simulator --enable-sim-config=file Override default config file --enable-sim-decode-mechanism=which Specify the instruction decode mechanism. --enable-sim-default-model=which Specify default PowerPC to model. @@ -5231,21 +5228,6 @@ else fi -# Check whether --enable-sim-cflags was given. -if test "${enable_sim_cflags+set}" = set; then : - enableval=$enable_sim_cflags; case "${enableval}" in - yes) sim_cflags="-O2 -fomit-frame-pointer";; - no) sim_cflags="";; - *) sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;; -esac -if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then - echo "Setting sim cflags = $sim_cflags" 6>&1 -fi -else - sim_cflags="" -fi - - # Check whether --enable-sim-config was given. if test "${enable_sim_config+set}" = set; then : enableval=$enable_sim_config; case "${enableval}" in @@ -7918,7 +7900,6 @@ fi - ac_config_files="$ac_config_files Makefile" diff --git a/sim/ppc/configure.ac b/sim/ppc/configure.ac index dff48d2a7f..0b6f849bfc 100644 --- a/sim/ppc/configure.ac +++ b/sim/ppc/configure.ac @@ -56,18 +56,6 @@ if test x"$silent" != x"yes" && test x"$sim_bitsize" != x""; then fi],[sim_bitsize=""])dnl -AC_ARG_ENABLE(sim-cflags, -[ --enable-sim-cflags=opts Extra CFLAGS for use in building simulator], -[case "${enableval}" in - yes) sim_cflags="-O2 -fomit-frame-pointer";; - no) sim_cflags="";; - *) sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;; -esac -if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then - echo "Setting sim cflags = $sim_cflags" 6>&1 -fi],[sim_cflags=""])dnl - - AC_ARG_ENABLE(sim-config, [ --enable-sim-config=file Override default config file], [case "${enableval}" in @@ -874,7 +862,6 @@ AC_SUBST(HDEFINES) AR=${AR-ar} AC_SUBST(AR) AC_PROG_RANLIB -AC_SUBST(sim_cflags) AC_SUBST(sim_warnings) AC_SUBST(sim_line_nr) AC_SUBST(sim_config) diff --git a/sim/rl78/ChangeLog b/sim/rl78/ChangeLog index 0d35ab0b8f..8eed2d61b6 100644 --- a/sim/rl78/ChangeLog +++ b/sim/rl78/ChangeLog @@ -1,3 +1,7 @@ +2016-01-10 Mike Frysinger + + * configure: Regenerate. + 2016-01-09 Mike Frysinger * config.in, configure: Regenerate. diff --git a/sim/rl78/configure b/sim/rl78/configure index 7ba111eda7..706484252d 100755 --- a/sim/rl78/configure +++ b/sim/rl78/configure @@ -608,7 +608,6 @@ sim_profile sim_trace sim_stdio sim_debug -sim_cflags MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -751,7 +750,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_cflags enable_sim_debug enable_sim_stdio enable_sim_trace @@ -1394,8 +1392,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-cflags=opts - Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim itself) --enable-sim-stdio Specify whether to use stdio for console @@ -12839,7 +12835,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12842 "configure" +#line 12838 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12945,7 +12941,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12948 "configure" +#line 12944 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -13213,23 +13209,6 @@ fi -# Check whether --enable-sim-cflags was given. -if test "${enable_sim_cflags+set}" = set; then : - enableval=$enable_sim_cflags; case "${enableval}" in - yes) sim_cflags="-O2 -fomit-frame-pointer";; - trace) as_fn_error "\"Please use --enable-sim-debug instead.\"" "$LINENO" 5; sim_cflags="";; - no) sim_cflags="";; - *) sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;; -esac -if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then - echo "Setting sim cflags = $sim_cflags" 6>&1 -fi -else - sim_cflags="" -fi - - - # Check whether --enable-sim-debug was given. if test "${enable_sim_debug+set}" = set; then : enableval=$enable_sim_debug; case "${enableval}" in diff --git a/sim/rx/ChangeLog b/sim/rx/ChangeLog index cff5fc8c6e..913b5ccd44 100644 --- a/sim/rx/ChangeLog +++ b/sim/rx/ChangeLog @@ -1,3 +1,7 @@ +2016-01-10 Mike Frysinger + + * configure: Regenerate. + 2016-01-09 Mike Frysinger * config.in, configure: Regenerate. diff --git a/sim/rx/configure b/sim/rx/configure index c62fdc371f..9d12c407f3 100755 --- a/sim/rx/configure +++ b/sim/rx/configure @@ -608,7 +608,6 @@ sim_profile sim_trace sim_stdio sim_debug -sim_cflags MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -751,7 +750,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_cflags enable_sim_debug enable_sim_stdio enable_sim_trace @@ -1396,8 +1394,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-cflags=opts - Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim itself) --enable-sim-stdio Specify whether to use stdio for console @@ -12844,7 +12840,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12847 "configure" +#line 12843 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12950,7 +12946,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12953 "configure" +#line 12949 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -13218,23 +13214,6 @@ fi -# Check whether --enable-sim-cflags was given. -if test "${enable_sim_cflags+set}" = set; then : - enableval=$enable_sim_cflags; case "${enableval}" in - yes) sim_cflags="-O2 -fomit-frame-pointer";; - trace) as_fn_error "\"Please use --enable-sim-debug instead.\"" "$LINENO" 5; sim_cflags="";; - no) sim_cflags="";; - *) sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;; -esac -if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then - echo "Setting sim cflags = $sim_cflags" 6>&1 -fi -else - sim_cflags="" -fi - - - # Check whether --enable-sim-debug was given. if test "${enable_sim_debug+set}" = set; then : enableval=$enable_sim_debug; case "${enableval}" in diff --git a/sim/sh/ChangeLog b/sim/sh/ChangeLog index f7a57bcf1a..ccc671a2f0 100644 --- a/sim/sh/ChangeLog +++ b/sim/sh/ChangeLog @@ -1,3 +1,7 @@ +2016-01-10 Mike Frysinger + + * configure: Regenerate. + 2016-01-09 Mike Frysinger * config.in, configure: Regenerate. diff --git a/sim/sh/configure b/sim/sh/configure index 87674c4fe5..027cd01149 100755 --- a/sim/sh/configure +++ b/sim/sh/configure @@ -608,7 +608,6 @@ sim_profile sim_trace sim_stdio sim_debug -sim_cflags MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -751,7 +750,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_cflags enable_sim_debug enable_sim_stdio enable_sim_trace @@ -1401,8 +1399,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-cflags=opts - Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim itself) --enable-sim-stdio Specify whether to use stdio for console @@ -12861,7 +12857,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12864 "configure" +#line 12860 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12967,7 +12963,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12970 "configure" +#line 12966 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -13235,23 +13231,6 @@ fi -# Check whether --enable-sim-cflags was given. -if test "${enable_sim_cflags+set}" = set; then : - enableval=$enable_sim_cflags; case "${enableval}" in - yes) sim_cflags="-O2 -fomit-frame-pointer";; - trace) as_fn_error "\"Please use --enable-sim-debug instead.\"" "$LINENO" 5; sim_cflags="";; - no) sim_cflags="";; - *) sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;; -esac -if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then - echo "Setting sim cflags = $sim_cflags" 6>&1 -fi -else - sim_cflags="" -fi - - - # Check whether --enable-sim-debug was given. if test "${enable_sim_debug+set}" = set; then : enableval=$enable_sim_debug; case "${enableval}" in diff --git a/sim/sh64/ChangeLog b/sim/sh64/ChangeLog index f430b460ed..7499506d5b 100644 --- a/sim/sh64/ChangeLog +++ b/sim/sh64/ChangeLog @@ -1,3 +1,7 @@ +2016-01-10 Mike Frysinger + + * configure: Regenerate. + 2016-01-09 Mike Frysinger * config.in, configure: Regenerate. diff --git a/sim/sh64/configure b/sim/sh64/configure index e180eef36b..3e0a8b2166 100755 --- a/sim/sh64/configure +++ b/sim/sh64/configure @@ -611,7 +611,6 @@ sim_profile sim_trace sim_stdio sim_debug -sim_cflags MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -754,7 +753,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_cflags enable_sim_debug enable_sim_stdio enable_sim_trace @@ -1405,8 +1403,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-cflags=opts - Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim itself) --enable-sim-stdio Specify whether to use stdio for console @@ -12867,7 +12863,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12870 "configure" +#line 12866 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12973,7 +12969,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12976 "configure" +#line 12972 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -13241,23 +13237,6 @@ fi -# Check whether --enable-sim-cflags was given. -if test "${enable_sim_cflags+set}" = set; then : - enableval=$enable_sim_cflags; case "${enableval}" in - yes) sim_cflags="-O2 -fomit-frame-pointer";; - trace) as_fn_error "\"Please use --enable-sim-debug instead.\"" "$LINENO" 5; sim_cflags="";; - no) sim_cflags="";; - *) sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;; -esac -if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then - echo "Setting sim cflags = $sim_cflags" 6>&1 -fi -else - sim_cflags="" -fi - - - # Check whether --enable-sim-debug was given. if test "${enable_sim_debug+set}" = set; then : enableval=$enable_sim_debug; case "${enableval}" in diff --git a/sim/testsuite/ChangeLog b/sim/testsuite/ChangeLog index 63ec3edb28..ef1068eb19 100644 --- a/sim/testsuite/ChangeLog +++ b/sim/testsuite/ChangeLog @@ -1,3 +1,7 @@ +2016-01-10 Mike Frysinger + + * configure: Regenerate. + 2016-01-02 Mike Frysinger * common/bits-gen.c (main): Change BIG_ENDIAN to BFD_ENDIAN_BIG and diff --git a/sim/testsuite/configure b/sim/testsuite/configure index 287245b835..bbc3bea48d 100755 --- a/sim/testsuite/configure +++ b/sim/testsuite/configure @@ -1823,7 +1823,6 @@ esac -sim_common=yes sim_igen=no sim_arch= case "${target}" in @@ -1914,10 +1913,6 @@ case "${target}" in sim_arch=v850 sim_igen=yes ;; - *) - # No simulator subdir, so the subdir "common" isn't needed. - sim_common=no - ;; esac diff --git a/sim/v850/ChangeLog b/sim/v850/ChangeLog index f9b14fac6b..b598fae2df 100644 --- a/sim/v850/ChangeLog +++ b/sim/v850/ChangeLog @@ -1,3 +1,7 @@ +2016-01-10 Mike Frysinger + + * configure: Regenerate. + 2016-01-09 Mike Frysinger * config.in, configure: Regenerate. diff --git a/sim/v850/configure b/sim/v850/configure index 8992c6b039..99f883aec9 100755 --- a/sim/v850/configure +++ b/sim/v850/configure @@ -608,7 +608,6 @@ sim_profile sim_trace sim_stdio sim_debug -sim_cflags MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -751,7 +750,6 @@ enable_fast_install with_gnu_ld enable_libtool_lock enable_maintainer_mode -enable_sim_cflags enable_sim_debug enable_sim_stdio enable_sim_trace @@ -1401,8 +1399,6 @@ Optional Features: --disable-libtool-lock avoid locking (might break parallel builds) --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-sim-cflags=opts - Extra CFLAGS for use in building simulator --enable-sim-debug=opts Enable debugging flags (for developers of the sim itself) --enable-sim-stdio Specify whether to use stdio for console @@ -12860,7 +12856,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12863 "configure" +#line 12859 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12966,7 +12962,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 12969 "configure" +#line 12965 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -13234,23 +13230,6 @@ fi -# Check whether --enable-sim-cflags was given. -if test "${enable_sim_cflags+set}" = set; then : - enableval=$enable_sim_cflags; case "${enableval}" in - yes) sim_cflags="-O2 -fomit-frame-pointer";; - trace) as_fn_error "\"Please use --enable-sim-debug instead.\"" "$LINENO" 5; sim_cflags="";; - no) sim_cflags="";; - *) sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;; -esac -if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then - echo "Setting sim cflags = $sim_cflags" 6>&1 -fi -else - sim_cflags="" -fi - - - # Check whether --enable-sim-debug was given. if test "${enable_sim_debug+set}" = set; then : enableval=$enable_sim_debug; case "${enableval}" in -- 2.34.1