From 06640310b43c9b3185629e2b919c0800486b0d8e Mon Sep 17 00:00:00 2001 From: Hariprasad Shenai Date: Tue, 13 Jan 2015 15:19:25 +0530 Subject: [PATCH] cxgb4: Ripping out old hard-wired initialization code in driver Removing old hard-wired initialization code in the driver, which is no longer used. Also deprecating few module parameters. Signed-off-by: Hariprasad Shenai Signed-off-by: David S. Miller --- .../net/ethernet/chelsio/cxgb4/cxgb4_main.c | 480 ++---------------- drivers/net/ethernet/chelsio/cxgb4/sge.c | 98 +--- 2 files changed, 58 insertions(+), 520 deletions(-) diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c index 23ae0b7a9019..082a596a4264 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c @@ -79,99 +79,6 @@ #define DRV_VERSION "2.0.0-ko" #define DRV_DESC "Chelsio T4/T5 Network Driver" -/* - * Max interrupt hold-off timer value in us. Queues fall back to this value - * under extreme memory pressure so it's largish to give the system time to - * recover. - */ -#define MAX_SGE_TIMERVAL 200U - -enum { - /* - * Physical Function provisioning constants. - */ - PFRES_NVI = 4, /* # of Virtual Interfaces */ - PFRES_NETHCTRL = 128, /* # of EQs used for ETH or CTRL Qs */ - PFRES_NIQFLINT = 128, /* # of ingress Qs/w Free List(s)/intr - */ - PFRES_NEQ = 256, /* # of egress queues */ - PFRES_NIQ = 0, /* # of ingress queues */ - PFRES_TC = 0, /* PCI-E traffic class */ - PFRES_NEXACTF = 128, /* # of exact MPS filters */ - - PFRES_R_CAPS = FW_CMD_CAP_PF, - PFRES_WX_CAPS = FW_CMD_CAP_PF, - -#ifdef CONFIG_PCI_IOV - /* - * Virtual Function provisioning constants. We need two extra Ingress - * Queues with Interrupt capability to serve as the VF's Firmware - * Event Queue and Forwarded Interrupt Queue (when using MSI mode) -- - * neither will have Free Lists associated with them). For each - * Ethernet/Control Egress Queue and for each Free List, we need an - * Egress Context. - */ - VFRES_NPORTS = 1, /* # of "ports" per VF */ - VFRES_NQSETS = 2, /* # of "Queue Sets" per VF */ - - VFRES_NVI = VFRES_NPORTS, /* # of Virtual Interfaces */ - VFRES_NETHCTRL = VFRES_NQSETS, /* # of EQs used for ETH or CTRL Qs */ - VFRES_NIQFLINT = VFRES_NQSETS+2,/* # of ingress Qs/w Free List(s)/intr */ - VFRES_NEQ = VFRES_NQSETS*2, /* # of egress queues */ - VFRES_NIQ = 0, /* # of non-fl/int ingress queues */ - VFRES_TC = 0, /* PCI-E traffic class */ - VFRES_NEXACTF = 16, /* # of exact MPS filters */ - - VFRES_R_CAPS = FW_CMD_CAP_DMAQ|FW_CMD_CAP_VF|FW_CMD_CAP_PORT, - VFRES_WX_CAPS = FW_CMD_CAP_DMAQ|FW_CMD_CAP_VF, -#endif -}; - -/* - * Provide a Port Access Rights Mask for the specified PF/VF. This is very - * static and likely not to be useful in the long run. We really need to - * implement some form of persistent configuration which the firmware - * controls. - */ -static unsigned int pfvfres_pmask(struct adapter *adapter, - unsigned int pf, unsigned int vf) -{ - unsigned int portn, portvec; - - /* - * Give PF's access to all of the ports. - */ - if (vf == 0) - return FW_PFVF_CMD_PMASK_M; - - /* - * For VFs, we'll assign them access to the ports based purely on the - * PF. We assign active ports in order, wrapping around if there are - * fewer active ports than PFs: e.g. active port[pf % nports]. - * Unfortunately the adapter's port_info structs haven't been - * initialized yet so we have to compute this. - */ - if (adapter->params.nports == 0) - return 0; - - portn = pf % adapter->params.nports; - portvec = adapter->params.portvec; - for (;;) { - /* - * Isolate the lowest set bit in the port vector. If we're at - * the port number that we want, return that as the pmask. - * otherwise mask that bit out of the port vector and - * decrement our port number ... - */ - unsigned int pmask = portvec ^ (portvec & (portvec-1)); - if (portn == 0) - return pmask; - portn--; - portvec &= ~pmask; - } - /*NOTREACHED*/ -} - enum { MAX_TXQ_ENTRIES = 16384, MAX_CTRL_TXQ_ENTRIES = 1024, @@ -264,7 +171,8 @@ MODULE_PARM_DESC(force_init, "Forcibly become Master PF and initialize adapter") static uint force_old_init; module_param(force_old_init, uint, 0644); -MODULE_PARM_DESC(force_old_init, "Force old initialization sequence"); +MODULE_PARM_DESC(force_old_init, "Force old initialization sequence, deprecated" + " parameter"); static int dflt_msg_enable = DFLT_MSG_ENABLE; @@ -293,13 +201,14 @@ static unsigned int intr_holdoff[SGE_NTIMERS - 1] = { 5, 10, 20, 50, 100 }; module_param_array(intr_holdoff, uint, NULL, 0644); MODULE_PARM_DESC(intr_holdoff, "values for queue interrupt hold-off timers " - "0..4 in microseconds"); + "0..4 in microseconds, deprecated parameter"); static unsigned int intr_cnt[SGE_NCOUNTERS - 1] = { 4, 8, 16 }; module_param_array(intr_cnt, uint, NULL, 0644); MODULE_PARM_DESC(intr_cnt, - "thresholds 1..3 for queue interrupt packet counters"); + "thresholds 1..3 for queue interrupt packet counters, " + "deprecated parameter"); /* * Normally we tell the chip to deliver Ingress Packets into our DMA buffers @@ -319,7 +228,8 @@ static bool vf_acls; #ifdef CONFIG_PCI_IOV module_param(vf_acls, bool, 0644); -MODULE_PARM_DESC(vf_acls, "if set enable virtualization L2 ACL enforcement"); +MODULE_PARM_DESC(vf_acls, "if set enable virtualization L2 ACL enforcement, " + "deprecated parameter"); /* Configure the number of PCI-E Virtual Function which are to be instantiated * on SR-IOV Capable Physical Functions. @@ -341,32 +251,11 @@ module_param(select_queue, int, 0644); MODULE_PARM_DESC(select_queue, "Select between kernel provided method of selecting or driver method of selecting TX queue. Default is kernel method."); -/* - * The filter TCAM has a fixed portion and a variable portion. The fixed - * portion can match on source/destination IP IPv4/IPv6 addresses and TCP/UDP - * ports. The variable portion is 36 bits which can include things like Exact - * Match MAC Index (9 bits), Ether Type (16 bits), IP Protocol (8 bits), - * [Inner] VLAN Tag (17 bits), etc. which, if all were somehow selected, would - * far exceed the 36-bit budget for this "compressed" header portion of the - * filter. Thus, we have a scarce resource which must be carefully managed. - * - * By default we set this up to mostly match the set of filter matching - * capabilities of T3 but with accommodations for some of T4's more - * interesting features: - * - * { IP Fragment (1), MPS Match Type (3), IP Protocol (8), - * [Inner] VLAN (17), Port (3), FCoE (1) } - */ -enum { - TP_VLAN_PRI_MAP_DEFAULT = HW_TPL_FR_MT_PR_IV_P_FC, - TP_VLAN_PRI_MAP_FIRST = FCOE_S, - TP_VLAN_PRI_MAP_LAST = FRAGMENTATION_S, -}; - -static unsigned int tp_vlan_pri_map = TP_VLAN_PRI_MAP_DEFAULT; +static unsigned int tp_vlan_pri_map = HW_TPL_FR_MT_PR_IV_P_FC; module_param(tp_vlan_pri_map, uint, 0644); -MODULE_PARM_DESC(tp_vlan_pri_map, "global compressed filter configuration"); +MODULE_PARM_DESC(tp_vlan_pri_map, "global compressed filter configuration, " + "deprecated parameter"); static struct dentry *cxgb4_debugfs_root; @@ -5225,12 +5114,9 @@ static int adap_init0_config(struct adapter *adapter, int reset) if (ret < 0) goto bye; - /* - * Return successfully and note that we're operating with parameters - * not supplied by the driver, rather than from hard-wired - * initialization constants burried in the driver. + /* Emit Firmware Configuration File information and return + * successfully. */ - adapter->flags |= USING_SOFT_PARAMS; dev_info(adapter->pdev_dev, "Successfully configured using Firmware "\ "Configuration File \"%s\", version %#x, computed checksum %#x\n", config_name, finiver, cfcsum); @@ -5248,248 +5134,6 @@ bye: return ret; } -/* - * Attempt to initialize the adapter via hard-coded, driver supplied - * parameters ... - */ -static int adap_init0_no_config(struct adapter *adapter, int reset) -{ - struct sge *s = &adapter->sge; - struct fw_caps_config_cmd caps_cmd; - u32 v; - int i, ret; - - /* - * Reset device if necessary - */ - if (reset) { - ret = t4_fw_reset(adapter, adapter->mbox, - PIORSTMODE_F | PIORST_F); - if (ret < 0) - goto bye; - } - - /* - * Get device capabilities and select which we'll be using. - */ - memset(&caps_cmd, 0, sizeof(caps_cmd)); - caps_cmd.op_to_write = htonl(FW_CMD_OP_V(FW_CAPS_CONFIG_CMD) | - FW_CMD_REQUEST_F | FW_CMD_READ_F); - caps_cmd.cfvalid_to_len16 = htonl(FW_LEN16(caps_cmd)); - ret = t4_wr_mbox(adapter, adapter->mbox, &caps_cmd, sizeof(caps_cmd), - &caps_cmd); - if (ret < 0) - goto bye; - - if (caps_cmd.niccaps & htons(FW_CAPS_CONFIG_NIC_VM)) { - if (!vf_acls) - caps_cmd.niccaps ^= htons(FW_CAPS_CONFIG_NIC_VM); - else - caps_cmd.niccaps = htons(FW_CAPS_CONFIG_NIC_VM); - } else if (vf_acls) { - dev_err(adapter->pdev_dev, "virtualization ACLs not supported"); - goto bye; - } - caps_cmd.op_to_write = htonl(FW_CMD_OP_V(FW_CAPS_CONFIG_CMD) | - FW_CMD_REQUEST_F | FW_CMD_WRITE_F); - ret = t4_wr_mbox(adapter, adapter->mbox, &caps_cmd, sizeof(caps_cmd), - NULL); - if (ret < 0) - goto bye; - - /* - * Tweak configuration based on system architecture, module - * parameters, etc. - */ - ret = adap_init0_tweaks(adapter); - if (ret < 0) - goto bye; - - /* - * Select RSS Global Mode we want to use. We use "Basic Virtual" - * mode which maps each Virtual Interface to its own section of - * the RSS Table and we turn on all map and hash enables ... - */ - adapter->flags |= RSS_TNLALLLOOKUP; - ret = t4_config_glbl_rss(adapter, adapter->mbox, - FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL, - FW_RSS_GLB_CONFIG_CMD_TNLMAPEN_F | - FW_RSS_GLB_CONFIG_CMD_HASHTOEPLITZ_F | - ((adapter->flags & RSS_TNLALLLOOKUP) ? - FW_RSS_GLB_CONFIG_CMD_TNLALLLKP_F : 0)); - if (ret < 0) - goto bye; - - /* - * Set up our own fundamental resource provisioning ... - */ - ret = t4_cfg_pfvf(adapter, adapter->mbox, adapter->fn, 0, - PFRES_NEQ, PFRES_NETHCTRL, - PFRES_NIQFLINT, PFRES_NIQ, - PFRES_TC, PFRES_NVI, - FW_PFVF_CMD_CMASK_M, - pfvfres_pmask(adapter, adapter->fn, 0), - PFRES_NEXACTF, - PFRES_R_CAPS, PFRES_WX_CAPS); - if (ret < 0) - goto bye; - - /* - * Perform low level SGE initialization. We need to do this before we - * send the firmware the INITIALIZE command because that will cause - * any other PF Drivers which are waiting for the Master - * Initialization to proceed forward. - */ - for (i = 0; i < SGE_NTIMERS - 1; i++) - s->timer_val[i] = min(intr_holdoff[i], MAX_SGE_TIMERVAL); - s->timer_val[SGE_NTIMERS - 1] = MAX_SGE_TIMERVAL; - s->counter_val[0] = 1; - for (i = 1; i < SGE_NCOUNTERS; i++) - s->counter_val[i] = min(intr_cnt[i - 1], THRESHOLD_0_M); - t4_sge_init(adapter); - -#ifdef CONFIG_PCI_IOV - /* - * Provision resource limits for Virtual Functions. We currently - * grant them all the same static resource limits except for the Port - * Access Rights Mask which we're assigning based on the PF. All of - * the static provisioning stuff for both the PF and VF really needs - * to be managed in a persistent manner for each device which the - * firmware controls. - */ - { - int pf, vf; - - for (pf = 0; pf < ARRAY_SIZE(num_vf); pf++) { - if (num_vf[pf] <= 0) - continue; - - /* VF numbering starts at 1! */ - for (vf = 1; vf <= num_vf[pf]; vf++) { - ret = t4_cfg_pfvf(adapter, adapter->mbox, - pf, vf, - VFRES_NEQ, VFRES_NETHCTRL, - VFRES_NIQFLINT, VFRES_NIQ, - VFRES_TC, VFRES_NVI, - FW_PFVF_CMD_CMASK_M, - pfvfres_pmask( - adapter, pf, vf), - VFRES_NEXACTF, - VFRES_R_CAPS, VFRES_WX_CAPS); - if (ret < 0) - dev_warn(adapter->pdev_dev, - "failed to "\ - "provision pf/vf=%d/%d; " - "err=%d\n", pf, vf, ret); - } - } - } -#endif - - /* - * Set up the default filter mode. Later we'll want to implement this - * via a firmware command, etc. ... This needs to be done before the - * firmare initialization command ... If the selected set of fields - * isn't equal to the default value, we'll need to make sure that the - * field selections will fit in the 36-bit budget. - */ - if (tp_vlan_pri_map != TP_VLAN_PRI_MAP_DEFAULT) { - int j, bits = 0; - - for (j = TP_VLAN_PRI_MAP_FIRST; j <= TP_VLAN_PRI_MAP_LAST; j++) - switch (tp_vlan_pri_map & (1 << j)) { - case 0: - /* compressed filter field not enabled */ - break; - case FCOE_F: - bits += 1; - break; - case PORT_F: - bits += 3; - break; - case VNIC_F: - bits += 17; - break; - case VLAN_F: - bits += 17; - break; - case TOS_F: - bits += 8; - break; - case PROTOCOL_F: - bits += 8; - break; - case ETHERTYPE_F: - bits += 16; - break; - case MACMATCH_F: - bits += 9; - break; - case MPSHITTYPE_F: - bits += 3; - break; - case FRAGMENTATION_F: - bits += 1; - break; - } - - if (bits > 36) { - dev_err(adapter->pdev_dev, - "tp_vlan_pri_map=%#x needs %d bits > 36;"\ - " using %#x\n", tp_vlan_pri_map, bits, - TP_VLAN_PRI_MAP_DEFAULT); - tp_vlan_pri_map = TP_VLAN_PRI_MAP_DEFAULT; - } - } - v = tp_vlan_pri_map; - t4_write_indirect(adapter, TP_PIO_ADDR_A, TP_PIO_DATA_A, - &v, 1, TP_VLAN_PRI_MAP_A); - - /* - * We need Five Tuple Lookup mode to be set in TP_GLOBAL_CONFIG order - * to support any of the compressed filter fields above. Newer - * versions of the firmware do this automatically but it doesn't hurt - * to set it here. Meanwhile, we do _not_ need to set Lookup Every - * Packet in TP_INGRESS_CONFIG to support matching non-TCP packets - * since the firmware automatically turns this on and off when we have - * a non-zero number of filters active (since it does have a - * performance impact). - */ - if (tp_vlan_pri_map) - t4_set_reg_field(adapter, TP_GLOBAL_CONFIG_A, - FIVETUPLELOOKUP_V(FIVETUPLELOOKUP_M), - FIVETUPLELOOKUP_V(FIVETUPLELOOKUP_M)); - - /* - * Tweak some settings. - */ - t4_write_reg(adapter, TP_SHIFT_CNT_A, SYNSHIFTMAX_V(6) | - RXTSHIFTMAXR1_V(4) | RXTSHIFTMAXR2_V(15) | - PERSHIFTBACKOFFMAX_V(8) | PERSHIFTMAX_V(8) | - KEEPALIVEMAXR1_V(4) | KEEPALIVEMAXR2_V(9)); - - /* - * Get basic stuff going by issuing the Firmware Initialize command. - * Note that this _must_ be after all PFVF commands ... - */ - ret = t4_fw_initialize(adapter, adapter->mbox); - if (ret < 0) - goto bye; - - /* - * Return successfully! - */ - dev_info(adapter->pdev_dev, "Successfully configured using built-in "\ - "driver parameters\n"); - return 0; - - /* - * Something bad happened. Return the error ... - */ -bye: - return ret; -} - static struct fw_info fw_info_array[] = { { .chip = CHELSIO_T4, @@ -5662,88 +5306,58 @@ static int adap_init0(struct adapter *adap) adap->params.nports = hweight32(port_vec); adap->params.portvec = port_vec; - /* - * If the firmware is initialized already (and we're not forcing a - * master initialization), note that we're living with existing - * adapter parameters. Otherwise, it's time to try initializing the - * adapter ... + /* If the firmware is initialized already, emit a simply note to that + * effect. Otherwise, it's time to try initializing the adapter. */ if (state == DEV_STATE_INIT) { dev_info(adap->pdev_dev, "Coming up as %s: "\ "Adapter already initialized\n", adap->flags & MASTER_PF ? "MASTER" : "SLAVE"); - adap->flags |= USING_SOFT_PARAMS; } else { dev_info(adap->pdev_dev, "Coming up as MASTER: "\ "Initializing adapter\n"); - /* - * If the firmware doesn't support Configuration - * Files warn user and exit, + + /* Find out whether we're dealing with a version of the + * firmware which has configuration file support. */ - if (ret < 0) - dev_warn(adap->pdev_dev, "Firmware doesn't support " - "configuration file.\n"); - if (force_old_init) - ret = adap_init0_no_config(adap, reset); - else { - /* - * Find out whether we're dealing with a version of - * the firmware which has configuration file support. - */ - params[0] = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) | - FW_PARAMS_PARAM_X_V( - FW_PARAMS_PARAM_DEV_CF)); - ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 1, - params, val); - - /* - * If the firmware doesn't support Configuration - * Files, use the old Driver-based, hard-wired - * initialization. Otherwise, try using the - * Configuration File support and fall back to the - * Driver-based initialization if there's no - * Configuration File found. - */ - if (ret < 0) - ret = adap_init0_no_config(adap, reset); - else { - /* - * The firmware provides us with a memory - * buffer where we can load a Configuration - * File from the host if we want to override - * the Configuration File in flash. - */ + params[0] = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) | + FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_CF)); + ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 1, + params, val); - ret = adap_init0_config(adap, reset); - if (ret == -ENOENT) { - dev_info(adap->pdev_dev, - "No Configuration File present " - "on adapter. Using hard-wired " - "configuration parameters.\n"); - ret = adap_init0_no_config(adap, reset); - } - } + /* If the firmware doesn't support Configuration Files, + * return an error. + */ + if (ret < 0) { + dev_err(adap->pdev_dev, "firmware doesn't support " + "Firmware Configuration Files\n"); + goto bye; + } + + /* The firmware provides us with a memory buffer where we can + * load a Configuration File from the host if we want to + * override the Configuration File in flash. + */ + ret = adap_init0_config(adap, reset); + if (ret == -ENOENT) { + dev_err(adap->pdev_dev, "no Configuration File " + "present on adapter.\n"); + goto bye; } if (ret < 0) { - dev_err(adap->pdev_dev, - "could not initialize adapter, error %d\n", - -ret); + dev_err(adap->pdev_dev, "could not initialize " + "adapter, error %d\n", -ret); goto bye; } } - /* - * If we're living with non-hard-coded parameters (either from a - * Firmware Configuration File or values programmed by a different PF - * Driver), give the SGE code a chance to pull in anything that it - * needs ... Note that this must be called after we retrieve our VPD - * parameters in order to know how to convert core ticks to seconds. + /* Give the SGE code a chance to pull in anything that it needs ... + * Note that this must be called after we retrieve our VPD parameters + * in order to know how to convert core ticks to seconds, etc. */ - if (adap->flags & USING_SOFT_PARAMS) { - ret = t4_sge_init(adap); - if (ret < 0) - goto bye; - } + ret = t4_sge_init(adap); + if (ret < 0) + goto bye; if (is_bypass_device(adap->pdev->device)) adap->params.bypass = 1; diff --git a/drivers/net/ethernet/chelsio/cxgb4/sge.c b/drivers/net/ethernet/chelsio/cxgb4/sge.c index a79fa6a0f5c5..ca42e2e9dec9 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/sge.c +++ b/drivers/net/ethernet/chelsio/cxgb4/sge.c @@ -2742,24 +2742,11 @@ void t4_sge_stop(struct adapter *adap) } /** - * t4_sge_init - initialize SGE + * t4_sge_init_soft - grab core SGE values needed by SGE code * @adap: the adapter * - * Performs SGE initialization needed every time after a chip reset. - * We do not initialize any of the queues here, instead the driver - * top-level must request them individually. - * - * Called in two different modes: - * - * 1. Perform actual hardware initialization and record hard-coded - * parameters which were used. This gets used when we're the - * Master PF and the Firmware Configuration File support didn't - * work for some reason. - * - * 2. We're not the Master PF or initialization was performed with - * a Firmware Configuration File. In this case we need to grab - * any of the SGE operating parameters that we need to have in - * order to do our job and make sure we can live with them ... + * We need to grab the SGE operating parameters that we need to have + * in order to do our job and make sure we can live with them. */ static int t4_sge_init_soft(struct adapter *adap) @@ -2852,73 +2839,13 @@ static int t4_sge_init_soft(struct adapter *adap) return 0; } -static int t4_sge_init_hard(struct adapter *adap) -{ - struct sge *s = &adap->sge; - - /* - * Set up our basic SGE mode to deliver CPL messages to our Ingress - * Queue and Packet Date to the Free List. - */ - t4_set_reg_field(adap, SGE_CONTROL_A, RXPKTCPLMODE_F, RXPKTCPLMODE_F); - - /* - * Set up to drop DOORBELL writes when the DOORBELL FIFO overflows - * and generate an interrupt when this occurs so we can recover. - */ - if (is_t4(adap->params.chip)) { - t4_set_reg_field(adap, SGE_DBFIFO_STATUS_A, - HP_INT_THRESH_V(HP_INT_THRESH_M) | - LP_INT_THRESH_V(LP_INT_THRESH_M), - HP_INT_THRESH_V(dbfifo_int_thresh) | - LP_INT_THRESH_V(dbfifo_int_thresh)); - } else { - t4_set_reg_field(adap, SGE_DBFIFO_STATUS_A, - LP_INT_THRESH_T5_V(LP_INT_THRESH_T5_M), - LP_INT_THRESH_T5_V(dbfifo_int_thresh)); - t4_set_reg_field(adap, SGE_DBFIFO_STATUS2_A, - HP_INT_THRESH_T5_V(HP_INT_THRESH_T5_M), - HP_INT_THRESH_T5_V(dbfifo_int_thresh)); - } - t4_set_reg_field(adap, SGE_DOORBELL_CONTROL_A, ENABLE_DROP_F, - ENABLE_DROP_F); - - /* - * SGE_FL_BUFFER_SIZE0 (RX_SMALL_PG_BUF) is set up by - * t4_fixup_host_params(). - */ - s->fl_pg_order = FL_PG_ORDER; - if (s->fl_pg_order) - t4_write_reg(adap, - SGE_FL_BUFFER_SIZE0_A+RX_LARGE_PG_BUF*sizeof(u32), - PAGE_SIZE << FL_PG_ORDER); - t4_write_reg(adap, SGE_FL_BUFFER_SIZE0_A+RX_SMALL_MTU_BUF*sizeof(u32), - FL_MTU_SMALL_BUFSIZE(adap)); - t4_write_reg(adap, SGE_FL_BUFFER_SIZE0_A+RX_LARGE_MTU_BUF*sizeof(u32), - FL_MTU_LARGE_BUFSIZE(adap)); - - /* - * Note that the SGE Ingress Packet Count Interrupt Threshold and - * Timer Holdoff values must be supplied by our caller. - */ - t4_write_reg(adap, SGE_INGRESS_RX_THRESHOLD_A, - THRESHOLD_0_V(s->counter_val[0]) | - THRESHOLD_1_V(s->counter_val[1]) | - THRESHOLD_2_V(s->counter_val[2]) | - THRESHOLD_3_V(s->counter_val[3])); - t4_write_reg(adap, SGE_TIMER_VALUE_0_AND_1_A, - TIMERVALUE0_V(us_to_core_ticks(adap, s->timer_val[0])) | - TIMERVALUE1_V(us_to_core_ticks(adap, s->timer_val[1]))); - t4_write_reg(adap, SGE_TIMER_VALUE_2_AND_3_A, - TIMERVALUE2_V(us_to_core_ticks(adap, s->timer_val[2])) | - TIMERVALUE3_V(us_to_core_ticks(adap, s->timer_val[3]))); - t4_write_reg(adap, SGE_TIMER_VALUE_4_AND_5_A, - TIMERVALUE4_V(us_to_core_ticks(adap, s->timer_val[4])) | - TIMERVALUE5_V(us_to_core_ticks(adap, s->timer_val[5]))); - - return 0; -} - +/** + * t4_sge_init - initialize SGE + * @adap: the adapter + * + * Perform low-level SGE code initialization needed every time after a + * chip reset. + */ int t4_sge_init(struct adapter *adap) { struct sge *s = &adap->sge; @@ -2959,10 +2886,7 @@ int t4_sge_init(struct adapter *adap) s->fl_align = max(ingpadboundary, ingpackboundary); } - if (adap->flags & USING_SOFT_PARAMS) - ret = t4_sge_init_soft(adap); - else - ret = t4_sge_init_hard(adap); + ret = t4_sge_init_soft(adap); if (ret < 0) return ret; -- 2.34.1