From 118015c4d4796df499e8779ff4d581fad6565d81 Mon Sep 17 00:00:00 2001 From: Andre Haupt Date: Mon, 19 Jan 2009 12:00:19 +0100 Subject: [PATCH] Staging: asus_oled: fix various checkpatch.pl issues regarding missing or obsolete spaces Signed-off-by: Andre Haupt Cc: Jakub Schmidtke Signed-off-by: Greg Kroah-Hartman --- drivers/staging/asus_oled/asus_oled.c | 66 +++++++++++++-------------- 1 file changed, 33 insertions(+), 33 deletions(-) diff --git a/drivers/staging/asus_oled/asus_oled.c b/drivers/staging/asus_oled/asus_oled.c index 41bf409a3932..591fc1418f7f 100644 --- a/drivers/staging/asus_oled/asus_oled.c +++ b/drivers/staging/asus_oled/asus_oled.c @@ -80,20 +80,20 @@ struct oled_dev_desc_str { }; /* table of devices that work with this driver */ -static struct usb_device_id id_table [] = { +static struct usb_device_id id_table[] = { { USB_DEVICE(0x0b05, 0x1726) }, // Asus G1/G2 (and variants) { USB_DEVICE(0x0b05, 0x175b) }, // Asus G50V (and possibly others - G70? G71?) { }, }; /* parameters of specific devices */ -static struct oled_dev_desc_str oled_dev_desc_table [] = { +static struct oled_dev_desc_str oled_dev_desc_table[] = { { 0x0b05, 0x1726, 128, PACK_MODE_G1, "G1/G2" }, { 0x0b05, 0x175b, 256, PACK_MODE_G50, "G50" }, { }, }; -MODULE_DEVICE_TABLE (usb, id_table); +MODULE_DEVICE_TABLE(usb, id_table); #define SETUP_PACKET_HEADER(packet, val1, val2, val3, val4, val5, val6, val7) \ do { \ @@ -107,7 +107,7 @@ MODULE_DEVICE_TABLE (usb, id_table); packet->header.value6 = val5; \ packet->header.value7 = val6; \ packet->header.value8 = val7; \ - } while(0); + } while (0); struct asus_oled_header { uint8_t magic1; @@ -165,7 +165,7 @@ static void enable_oled(struct asus_oled_dev *odev, uint8_t enabl) else packet->bitmap[0] = 0xae; - for (a=0; a<1; a++) { + for (a = 0; a < 1; a++) { retval = usb_bulk_msg(odev->udev, usb_sndbulkpipe(odev->udev, 2), packet, @@ -254,7 +254,7 @@ static void send_packets(struct usb_device *udev, struct asus_oled_packet *packe } } -static void send_packet(struct usb_device *udev, struct asus_oled_packet *packet, size_t offset, size_t len, char *buf, uint8_t b1, uint8_t b2, uint8_t b3, uint8_t b4, uint8_t b5, uint8_t b6){ +static void send_packet(struct usb_device *udev, struct asus_oled_packet *packet, size_t offset, size_t len, char *buf, uint8_t b1, uint8_t b2, uint8_t b3, uint8_t b4, uint8_t b5, uint8_t b6) { int retval; int act_len; @@ -296,7 +296,7 @@ static void send_data(struct asus_oled_dev *odev) return; } - if (odev->pack_mode==PACK_MODE_G1){ + if (odev->pack_mode == PACK_MODE_G1) { // When sending roll-mode data the display updated only first packet. // I have no idea why, but when static picture is send just before // rolling picture - everything works fine. @@ -310,7 +310,7 @@ static void send_data(struct asus_oled_dev *odev) send_packets(odev->udev, packet, odev->buf, odev->pic_mode, packet_num); } else - if (odev->pack_mode==PACK_MODE_G50){ + if (odev->pack_mode == PACK_MODE_G50) { send_packets_g50(odev->udev, packet, odev->buf); } @@ -328,7 +328,7 @@ static int append_values(struct asus_oled_dev *odev, uint8_t val, size_t count) x += odev->x_shift; y += odev->y_shift; - switch(odev->pack_mode) + switch (odev->pack_mode) { case PACK_MODE_G1: // i = (x/128)*640 + 127 - x + (y/8)*128; @@ -382,7 +382,7 @@ static ssize_t odev_set_picture(struct asus_oled_dev *odev, const char *buf, siz if (count < 1) return 0; - if (tolower(buf[0]) == 'b'){ + if (tolower(buf[0]) == 'b') { // binary mode, set the entire memory size_t i; @@ -395,16 +395,16 @@ static ssize_t odev_set_picture(struct asus_oled_dev *odev, const char *buf, siz memset(odev->buf, 0xff, odev->buf_size); - for (i=1; i < count && i<=32*32; i++){ + for (i = 1; i < count && i <= 32 * 32; i++) { odev->buf[i-1] = buf[i]; odev->buf_offs = i-1; } - odev->width=odev->dev_width / 8; - odev->height=ASUS_OLED_DISP_HEIGHT; - odev->x_shift=0; - odev->y_shift=0; - odev->last_val=0; + odev->width = odev->dev_width / 8; + odev->height = ASUS_OLED_DISP_HEIGHT; + odev->x_shift = 0; + odev->y_shift = 0; + odev->last_val = 0; send_data(odev); @@ -420,7 +420,7 @@ static ssize_t odev_set_picture(struct asus_oled_dev *odev, const char *buf, siz goto error_header; } - switch(tolower(buf[1])) { + switch (tolower(buf[1])) { case ASUS_OLED_STATIC: case ASUS_OLED_ROLL: case ASUS_OLED_FLASH: @@ -519,18 +519,18 @@ static ssize_t odev_set_picture(struct asus_oled_dev *odev, const char *buf, siz int ret; if (buf[offs] == '1' || buf[offs] == '#') { - if ( (ret = append_values(odev, 1, 1)) < 0) + if ((ret = append_values(odev, 1, 1)) < 0) return ret; } else if (buf[offs] == '0' || buf[offs] == ' ') { - if ( (ret = append_values(odev, 0, 1)) < 0) + if ((ret = append_values(odev, 0, 1)) < 0) return ret; } else if (buf[offs] == '\n') { // New line detected. Lets assume, that all characters till the end of the // line were equal to the last character in this line. if (odev->buf_offs % odev->width != 0) - if ( (ret = append_values(odev, odev->last_val, + if ((ret = append_values(odev, odev->last_val, odev->width - (odev->buf_offs % odev->width))) < 0) return ret; } @@ -604,7 +604,7 @@ static int asus_oled_probe(struct usb_interface *interface, const struct usb_dev } } - if ( !desc || dev_width < 1 || pack_mode == PACK_MODE_LAST) { + if (!desc || dev_width < 1 || pack_mode == PACK_MODE_LAST) { dev_err(&interface->dev, "Missing or incomplete device description!\n"); return -ENODEV; } @@ -631,7 +631,7 @@ static int asus_oled_probe(struct usb_interface *interface, const struct usb_dev odev->enabled = 1; odev->dev = NULL; - usb_set_intfdata (interface, odev); + usb_set_intfdata(interface, odev); if ((retval = device_create_file(&interface->dev, &ASUS_OLED_DEVICE_ATTR(enabled)))) { goto err_files; @@ -641,8 +641,8 @@ static int asus_oled_probe(struct usb_interface *interface, const struct usb_dev goto err_files; } - odev->dev = device_create(oled_class, &interface->dev, MKDEV(0,0), - NULL,"oled_%d", ++oled_num); + odev->dev = device_create(oled_class, &interface->dev, MKDEV(0, 0), + NULL, "oled_%d", ++oled_num); if (IS_ERR(odev->dev)) { retval = PTR_ERR(odev->dev); @@ -651,11 +651,11 @@ static int asus_oled_probe(struct usb_interface *interface, const struct usb_dev dev_set_drvdata(odev->dev, odev); - if ( (retval = device_create_file(odev->dev, &dev_attr_enabled))) { + if ((retval = device_create_file(odev->dev, &dev_attr_enabled))) { goto err_class_enabled; } - if ( (retval = device_create_file(odev->dev, &dev_attr_picture))) { + if ((retval = device_create_file(odev->dev, &dev_attr_picture))) { goto err_class_picture; } @@ -677,7 +677,7 @@ err_files: device_remove_file(&interface->dev, &ASUS_OLED_DEVICE_ATTR(enabled)); device_remove_file(&interface->dev, &ASUS_OLED_DEVICE_ATTR(picture)); - usb_set_intfdata (interface, NULL); + usb_set_intfdata(interface, NULL); usb_put_dev(odev->udev); kfree(odev); @@ -688,15 +688,15 @@ static void asus_oled_disconnect(struct usb_interface *interface) { struct asus_oled_dev *odev; - odev = usb_get_intfdata (interface); - usb_set_intfdata (interface, NULL); + odev = usb_get_intfdata(interface); + usb_set_intfdata(interface, NULL); device_remove_file(odev->dev, &dev_attr_picture); device_remove_file(odev->dev, &dev_attr_enabled); device_unregister(odev->dev); - device_remove_file(&interface->dev, & ASUS_OLED_DEVICE_ATTR(picture)); - device_remove_file(&interface->dev, & ASUS_OLED_DEVICE_ATTR(enabled)); + device_remove_file(&interface->dev, &ASUS_OLED_DEVICE_ATTR(picture)); + device_remove_file(&interface->dev, &ASUS_OLED_DEVICE_ATTR(enabled)); usb_put_dev(odev->udev); @@ -759,6 +759,6 @@ static void __exit asus_oled_exit(void) usb_deregister(&oled_driver); } -module_init (asus_oled_init); -module_exit (asus_oled_exit); +module_init(asus_oled_init); +module_exit(asus_oled_exit); -- 2.34.1