From 1333b90f33623cdc4028a3523bc186330573990a Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 23 Apr 2014 16:45:12 +0200 Subject: [PATCH] gpio: do not set up hardware for IRQ_TYPE_NONE Some GPIO irqchip drivers exploit the irqdomain mapping function to set up the IRQ default type in the hardware, make sure that if we pass IRQ_TYPE_NONE, no hardware setup whatsoever takes place (this should be the norm) until later when the IRQ gets utilized. Cc: Ezequiel Garcia Cc: Santosh Shilimkar Cc: linux-omap Tested-by: Peter Ujfalusi Tested-by: Javier Martinez Canillas Tested-by: Nishanth Menon Acked-by: Nishanth Menon Tested-by: Tony Lindgren Signed-off-by: Linus Walleij --- drivers/gpio/gpiolib.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index ee1819fdcf35..97d173e9aa2d 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -1409,7 +1409,12 @@ static int gpiochip_irq_map(struct irq_domain *d, unsigned int irq, #else irq_set_noprobe(irq); #endif - irq_set_irq_type(irq, chip->irq_default_type); + /* + * No set-up of the hardware will happen if IRQ_TYPE_NONE + * is passed as default type. + */ + if (chip->irq_default_type != IRQ_TYPE_NONE) + irq_set_irq_type(irq, chip->irq_default_type); return 0; } @@ -1490,7 +1495,8 @@ static void gpiochip_irqchip_remove(struct gpio_chip *gpiochip) * @first_irq: if not dynamically assigned, the base (first) IRQ to * allocate gpiochip irqs from * @handler: the irq handler to use (often a predefined irq core function) - * @type: the default type for IRQs on this irqchip + * @type: the default type for IRQs on this irqchip, pass IRQ_TYPE_NONE + * to have the core avoid setting up any default type in the hardware. * * This function closely associates a certain irqchip with a certain * gpiochip, providing an irq domain to translate the local IRQs to -- 2.34.1