From 14be9947ef9843102b67d315c7483de112b5b2d7 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Sun, 28 Sep 2008 12:09:43 -0400 Subject: [PATCH] ath5k: write beacon control register twice when resetting tsf According to the newly-released Atheros HAL code, asserting the TSF reset bit will toggle a hardware internal state, resulting in a spurious reset on the next chip reset. Whenever we force a TSF bit, write the bit twice to clear the internal signal. Signed-off-by: Bob Copeland Acked-by: Nick Kossifidis Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/pcu.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath5k/pcu.c b/drivers/net/wireless/ath5k/pcu.c index c77cee2a5582..a47df9a24aa1 100644 --- a/drivers/net/wireless/ath5k/pcu.c +++ b/drivers/net/wireless/ath5k/pcu.c @@ -633,8 +633,20 @@ u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah) */ void ath5k_hw_reset_tsf(struct ath5k_hw *ah) { + u32 val; + ATH5K_TRACE(ah->ah_sc); - AR5K_REG_ENABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_RESET_TSF); + + val = ath5k_hw_reg_read(ah, AR5K_BEACON) | AR5K_BEACON_RESET_TSF; + + /* + * Each write to the RESET_TSF bit toggles a hardware internal + * signal to reset TSF, but if left high it will cause a TSF reset + * on the next chip reset as well. Thus we always write the value + * twice to clear the signal. + */ + ath5k_hw_reg_write(ah, val, AR5K_BEACON); + ath5k_hw_reg_write(ah, val, AR5K_BEACON); } /* -- 2.34.1